Merge master.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-2.6

5 files changed, 156 insertions, 113 deletions

diff --git a/drivers/acpi/hardware/hwacpi.c b/drivers/acpi/hardware/hwacpi.c
index 529e922bdc8..b51001e74ee 100644
--- a/drivers/acpi/hardware/hwacpi.c
+++ b/drivers/acpi/hardware/hwacpi.c
@@ -58,7 +58,8 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Initialize and validate various ACPI registers
+ * DESCRIPTION: Initialize and validate the various ACPI registers defined in
+ *              the FADT.
  *
  ******************************************************************************/
 
@@ -75,7 +76,7 @@ acpi_hw_initialize (
 	/* We must have the ACPI tables by the time we get here */
 
 	if (!acpi_gbl_FADT) {
-		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "A FADT is not loaded\n"));
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No FADT is present\n"));
 
 		return_ACPI_STATUS (AE_NO_ACPI_TABLES);
 	}
@@ -131,7 +132,8 @@ acpi_hw_set_mode (
 	 * transitions are not supported.
 	 */
 	if (!acpi_gbl_FADT->acpi_enable && !acpi_gbl_FADT->acpi_disable) {
-		ACPI_REPORT_ERROR (("No ACPI mode transition supported in this system (enable/disable both zero)\n"));
+		ACPI_REPORT_ERROR ((
+			"No ACPI mode transition supported in this system (enable/disable both zero)\n"));
 		return_ACPI_STATUS (AE_OK);
 	}
 
@@ -162,7 +164,8 @@ acpi_hw_set_mode (
 	}
 
 	if (ACPI_FAILURE (status)) {
-		ACPI_REPORT_ERROR (("Could not write mode change, %s\n", acpi_format_exception (status)));
+		ACPI_REPORT_ERROR (("Could not write mode change, %s\n",
+			acpi_format_exception (status)));
 		return_ACPI_STATUS (status);
 	}
 
@@ -173,7 +176,8 @@ acpi_hw_set_mode (
 	retry = 3000;
 	while (retry) {
 		if (acpi_hw_get_mode() == mode) {
-			ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Mode %X successfully enabled\n", mode));
+			ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Mode %X successfully enabled\n",
+				mode));
 			return_ACPI_STATUS (AE_OK);
 		}
 		acpi_os_stall(1000);
@@ -185,7 +189,7 @@ acpi_hw_set_mode (
 }
 
 
-/******************************************************************************
+/*******************************************************************************
  *
  * FUNCTION:    acpi_hw_get_mode
  *
@@ -199,7 +203,8 @@ acpi_hw_set_mode (
  ******************************************************************************/
 
 u32
-acpi_hw_get_mode (void)
+acpi_hw_get_mode (
+	void)
 {
 	acpi_status                     status;
 	u32                             value;
diff --git a/drivers/acpi/hardware/hwgpe.c b/drivers/acpi/hardware/hwgpe.c
index 9ac1d639bf5..8daeabb2fc7 100644
--- a/drivers/acpi/hardware/hwgpe.c
+++ b/drivers/acpi/hardware/hwgpe.c
@@ -48,6 +48,13 @@
 #define _COMPONENT          ACPI_HARDWARE
 	 ACPI_MODULE_NAME    ("hwgpe")
 
+/* Local prototypes */
+
+static acpi_status
+acpi_hw_enable_wakeup_gpe_block (
+	struct acpi_gpe_xrupt_info      *gpe_xrupt_info,
+	struct acpi_gpe_block_info      *gpe_block);
+
 
 /******************************************************************************
  *
@@ -135,6 +142,7 @@ acpi_hw_clear_gpe (
  * DESCRIPTION: Return the status of a single GPE.
  *
  ******************************************************************************/
+
 #ifdef ACPI_FUTURE_USAGE
 acpi_status
 acpi_hw_get_gpe_status (
@@ -206,7 +214,7 @@ unlock_and_exit:
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Disable all GPEs within a GPE block
+ * DESCRIPTION: Disable all GPEs within a single GPE block
  *
  ******************************************************************************/
 
@@ -244,7 +252,7 @@ acpi_hw_disable_gpe_block (
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Clear status bits for all GPEs within a GPE block
+ * DESCRIPTION: Clear status bits for all GPEs within a single GPE block
  *
  ******************************************************************************/
 
@@ -282,8 +290,8 @@ acpi_hw_clear_gpe_block (
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Enable all "runtime" GPEs within a GPE block. (Includes
- *              combination wake/run GPEs.)
+ * DESCRIPTION: Enable all "runtime" GPEs within a single GPE block. Includes
+ *              combination wake/run GPEs.
  *
  ******************************************************************************/
 
@@ -327,12 +335,12 @@ acpi_hw_enable_runtime_gpe_block (
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Enable all "wake" GPEs within a GPE block.  (Includes
- *              combination wake/run GPEs.)
+ * DESCRIPTION: Enable all "wake" GPEs within a single GPE block. Includes
+ *              combination wake/run GPEs.
  *
  ******************************************************************************/
 
-acpi_status
+static acpi_status
 acpi_hw_enable_wakeup_gpe_block (
 	struct acpi_gpe_xrupt_info      *gpe_xrupt_info,
 	struct acpi_gpe_block_info      *gpe_block)
@@ -350,7 +358,8 @@ acpi_hw_enable_wakeup_gpe_block (
 
 		/* Enable all "wake" GPEs in this register */
 
-		status = acpi_hw_low_level_write (8, gpe_block->register_info[i].enable_for_wake,
+		status = acpi_hw_low_level_write (8,
+				 gpe_block->register_info[i].enable_for_wake,
 				 &gpe_block->register_info[i].enable_address);
 		if (ACPI_FAILURE (status)) {
 			return (status);
@@ -369,7 +378,7 @@ acpi_hw_enable_wakeup_gpe_block (
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Disable and clear all GPEs
+ * DESCRIPTION: Disable and clear all GPEs in all GPE blocks
  *
  ******************************************************************************/
 
@@ -397,7 +406,7 @@ acpi_hw_disable_all_gpes (
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Enable all GPEs of the given type
+ * DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks
  *
  ******************************************************************************/
 
@@ -424,7 +433,7 @@ acpi_hw_enable_all_runtime_gpes (
  *
  * RETURN:      Status
  *
- * DESCRIPTION: Enable all GPEs of the given type
+ * DESCRIPTION: Enable all "wakeup" GPEs, in all GPE blocks
  *
  ******************************************************************************/
 
diff --git a/drivers/acpi/hardware/hwregs.c b/drivers/acpi/hardware/hwregs.c
index 91af0c2ddcf..6d9e4eb8483 100644
--- a/drivers/acpi/hardware/hwregs.c
+++ b/drivers/acpi/hardware/hwregs.c
@@ -87,8 +87,9 @@ acpi_hw_clear_acpi_status (
 		}
 	}
 
-	status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS,
-			  ACPI_BITMASK_ALL_FIXED_STATUS);
+	status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
+			 ACPI_REGISTER_PM1_STATUS,
+			 ACPI_BITMASK_ALL_FIXED_STATUS);
 	if (ACPI_FAILURE (status)) {
 		goto unlock_and_exit;
 	}
@@ -138,28 +139,30 @@ acpi_get_sleep_type_data (
 {
 	acpi_status                     status = AE_OK;
 	struct acpi_parameter_info      info;
+	char                            *sleep_state_name;
 
 
 	ACPI_FUNCTION_TRACE ("acpi_get_sleep_type_data");
 
 
-	/*
-	 * Validate parameters
-	 */
+	/* Validate parameters */
+
 	if ((sleep_state > ACPI_S_STATES_MAX) ||
 		!sleep_type_a || !sleep_type_b) {
 		return_ACPI_STATUS (AE_BAD_PARAMETER);
 	}
 
-	/*
-	 * Evaluate the namespace object containing the values for this state
-	 */
+	/* Evaluate the namespace object containing the values for this state */
+
 	info.parameters = NULL;
-	status = acpi_ns_evaluate_by_name ((char *) acpi_gbl_sleep_state_names[sleep_state],
-			  &info);
+	info.return_object = NULL;
+	sleep_state_name = (char *) acpi_gbl_sleep_state_names[sleep_state];
+
+	status = acpi_ns_evaluate_by_name (sleep_state_name, &info);
 	if (ACPI_FAILURE (status)) {
-		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "%s while evaluating sleep_state [%s]\n",
-			acpi_format_exception (status), acpi_gbl_sleep_state_names[sleep_state]));
+		ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
+			"%s while evaluating sleep_state [%s]\n",
+			acpi_format_exception (status), sleep_state_name));
 
 		return_ACPI_STATUS (status);
 	}
@@ -167,45 +170,57 @@ acpi_get_sleep_type_data (
 	/* Must have a return object */
 
 	if (!info.return_object) {
-		ACPI_REPORT_ERROR (("Missing Sleep State object\n"));
+		ACPI_REPORT_ERROR (("No Sleep State object returned from [%s]\n",
+			sleep_state_name));
 		status = AE_NOT_EXIST;
 	}
 
 	/* It must be of type Package */
 
 	else if (ACPI_GET_OBJECT_TYPE (info.return_object) != ACPI_TYPE_PACKAGE) {
-		ACPI_REPORT_ERROR (("Sleep State object not a Package\n"));
+		ACPI_REPORT_ERROR (("Sleep State return object is not a Package\n"));
 		status = AE_AML_OPERAND_TYPE;
 	}
 
-	/* The package must have at least two elements */
-
+	/*
+	 * The package must have at least two elements.  NOTE (March 2005): This
+	 * goes against the current ACPI spec which defines this object as a
+	 * package with one encoded DWORD element.  However, existing practice
+	 * by BIOS vendors seems to be to have 2 or more elements, at least
+	 * one per sleep type (A/B).
+	 */
 	else if (info.return_object->package.count < 2) {
-		ACPI_REPORT_ERROR (("Sleep State package does not have at least two elements\n"));
+		ACPI_REPORT_ERROR ((
+			"Sleep State return package does not have at least two elements\n"));
 		status = AE_AML_NO_OPERAND;
 	}
 
 	/* The first two elements must both be of type Integer */
 
-	else if ((ACPI_GET_OBJECT_TYPE (info.return_object->package.elements[0]) != ACPI_TYPE_INTEGER) ||
-			 (ACPI_GET_OBJECT_TYPE (info.return_object->package.elements[1]) != ACPI_TYPE_INTEGER)) {
-		ACPI_REPORT_ERROR (("Sleep State package elements are not both Integers (%s, %s)\n",
+	else if ((ACPI_GET_OBJECT_TYPE (info.return_object->package.elements[0])
+			 != ACPI_TYPE_INTEGER) ||
+			 (ACPI_GET_OBJECT_TYPE (info.return_object->package.elements[1])
+				!= ACPI_TYPE_INTEGER)) {
+		ACPI_REPORT_ERROR ((
+			"Sleep State return package elements are not both Integers (%s, %s)\n",
 			acpi_ut_get_object_type_name (info.return_object->package.elements[0]),
 			acpi_ut_get_object_type_name (info.return_object->package.elements[1])));
 		status = AE_AML_OPERAND_TYPE;
 	}
 	else {
-		/*
-		 * Valid _Sx_ package size, type, and value
-		 */
-		*sleep_type_a = (u8) (info.return_object->package.elements[0])->integer.value;
-		*sleep_type_b = (u8) (info.return_object->package.elements[1])->integer.value;
+		/* Valid _Sx_ package size, type, and value */
+
+		*sleep_type_a = (u8)
+			(info.return_object->package.elements[0])->integer.value;
+		*sleep_type_b = (u8)
+			(info.return_object->package.elements[1])->integer.value;
 	}
 
 	if (ACPI_FAILURE (status)) {
 		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
-			"While evaluating sleep_state [%s], bad Sleep object %p type %s\n",
-			acpi_gbl_sleep_state_names[sleep_state], info.return_object,
+			"%s While evaluating sleep_state [%s], bad Sleep object %p type %s\n",
+			acpi_format_exception (status),
+			sleep_state_name, info.return_object,
 			acpi_ut_get_object_type_name (info.return_object)));
 	}
 
@@ -221,9 +236,9 @@ EXPORT_SYMBOL(acpi_get_sleep_type_data);
  *
  * PARAMETERS:  register_id         - Index of ACPI Register to access
  *
- * RETURN:      The bit mask to be used when accessing the register
+ * RETURN:      The bitmask to be used when accessing the register
  *
- * DESCRIPTION: Map register_id into a register bit mask.
+ * DESCRIPTION: Map register_id into a register bitmask.
  *
  ******************************************************************************/
 
@@ -359,7 +374,7 @@ acpi_set_register (
 	/* Always do a register read first so we can insert the new bits  */
 
 	status = acpi_hw_register_read (ACPI_MTX_DO_NOT_LOCK,
-			  bit_reg_info->parent_register, &register_value);
+			 bit_reg_info->parent_register, &register_value);
 	if (ACPI_FAILURE (status)) {
 		goto unlock_and_exit;
 	}
@@ -396,7 +411,7 @@ acpi_set_register (
 				bit_reg_info->access_bit_mask, value);
 
 		status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
-				  ACPI_REGISTER_PM1_ENABLE, (u16) register_value);
+				 ACPI_REGISTER_PM1_ENABLE, (u16) register_value);
 		break;
 
 
@@ -413,7 +428,7 @@ acpi_set_register (
 				bit_reg_info->access_bit_mask, value);
 
 		status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
-				  ACPI_REGISTER_PM1_CONTROL, (u16) register_value);
+				 ACPI_REGISTER_PM1_CONTROL, (u16) register_value);
 		break;
 
 
@@ -427,17 +442,19 @@ acpi_set_register (
 
 		ACPI_DEBUG_PRINT ((ACPI_DB_IO, "PM2 control: Read %X from %8.8X%8.8X\n",
 			register_value,
-			ACPI_FORMAT_UINT64 (acpi_gbl_FADT->xpm2_cnt_blk.address)));
+			ACPI_FORMAT_UINT64 (
+				acpi_gbl_FADT->xpm2_cnt_blk.address)));
 
 		ACPI_REGISTER_INSERT_VALUE (register_value, bit_reg_info->bit_position,
 				bit_reg_info->access_bit_mask, value);
 
 		ACPI_DEBUG_PRINT ((ACPI_DB_IO, "About to write %4.4X to %8.8X%8.8X\n",
 			register_value,
-			ACPI_FORMAT_UINT64 (acpi_gbl_FADT->xpm2_cnt_blk.address)));
+			ACPI_FORMAT_UINT64 (
+				acpi_gbl_FADT->xpm2_cnt_blk.address)));
 
 		status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
-				   ACPI_REGISTER_PM2_CONTROL, (u8) (register_value));
+				 ACPI_REGISTER_PM2_CONTROL, (u8) (register_value));
 		break;
 
 
@@ -454,7 +471,9 @@ unlock_and_exit:
 
 	/* Normalize the value that was read */
 
-	ACPI_DEBUG_EXEC (register_value = ((register_value & bit_reg_info->access_bit_mask) >> bit_reg_info->bit_position));
+	ACPI_DEBUG_EXEC (register_value =
+		((register_value & bit_reg_info->access_bit_mask) >>
+			bit_reg_info->bit_position));
 
 	ACPI_DEBUG_PRINT ((ACPI_DB_IO, "Set bits: %8.8X actual %8.8X register %X\n",
 			value, register_value, bit_reg_info->parent_register));
@@ -469,7 +488,7 @@ EXPORT_SYMBOL(acpi_set_register);
  *
  * PARAMETERS:  use_lock            - Mutex hw access
  *              register_id         - register_iD + Offset
- *              return_value        - Value that was read from the register
+ *              return_value        - Where the register value is returned
  *
  * RETURN:      Status and the value read.
  *
@@ -557,7 +576,8 @@ acpi_hw_register_read (
 		break;
 
 	default:
-		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unknown Register ID: %X\n", register_id));
+		ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Unknown Register ID: %X\n",
+			register_id));
 		status = AE_BAD_PARAMETER;
 		break;
 	}
@@ -763,10 +783,11 @@ acpi_hw_low_level_read (
 		return (AE_BAD_PARAMETER);
 	}
 
-	ACPI_DEBUG_PRINT ((ACPI_DB_IO, "Read:  %8.8X width %2d from %8.8X%8.8X (%s)\n",
-			*value, width,
-			ACPI_FORMAT_UINT64 (address),
-			acpi_ut_get_region_name (reg->address_space_id)));
+	ACPI_DEBUG_PRINT ((ACPI_DB_IO,
+		"Read:  %8.8X width %2d from %8.8X%8.8X (%s)\n",
+		*value, width,
+		ACPI_FORMAT_UINT64 (address),
+		acpi_ut_get_region_name (reg->address_space_id)));
 
 	return (status);
 }
@@ -841,10 +862,11 @@ acpi_hw_low_level_write (
 		return (AE_BAD_PARAMETER);
 	}
 
-	ACPI_DEBUG_PRINT ((ACPI_DB_IO, "Wrote: %8.8X width %2d   to %8.8X%8.8X (%s)\n",
-			value, width,
-			ACPI_FORMAT_UINT64 (address),
-			acpi_ut_get_region_name (reg->address_space_id)));
+	ACPI_DEBUG_PRINT ((ACPI_DB_IO,
+		"Wrote: %8.8X width %2d   to %8.8X%8.8X (%s)\n",
+		value, width,
+		ACPI_FORMAT_UINT64 (address),
+		acpi_ut_get_region_name (reg->address_space_id)));
 
 	return (status);
 }
diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c
index 77b3e9a8550..415d342aeab 100644
--- a/drivers/acpi/hardware/hwsleep.c
+++ b/drivers/acpi/hardware/hwsleep.c
@@ -43,27 +43,13 @@
  */
 
 #include <linux/module.h>
-
 #include <acpi/acpi.h>
 
 #define _COMPONENT          ACPI_HARDWARE
 	 ACPI_MODULE_NAME    ("hwsleep")
 
 
-#define METHOD_NAME__BFS        "\\_BFS"
-#define METHOD_NAME__GTS        "\\_GTS"
-#define METHOD_NAME__PTS        "\\_PTS"
-#define METHOD_NAME__SST        "\\_SI._SST"
-#define METHOD_NAME__WAK        "\\_WAK"
-
-#define ACPI_SST_INDICATOR_OFF  0
-#define ACPI_SST_WORKING        1
-#define ACPI_SST_WAKING         2
-#define ACPI_SST_SLEEPING       3
-#define ACPI_SST_SLEEP_CONTEXT  4
-
-
-/******************************************************************************
+/*******************************************************************************
  *
  * FUNCTION:    acpi_set_firmware_waking_vector
  *
@@ -72,7 +58,7 @@
  *
  * RETURN:      Status
  *
- * DESCRIPTION: access function for d_firmware_waking_vector field in FACS
+ * DESCRIPTION: Access function for the firmware_waking_vector field in FACS
  *
  ******************************************************************************/
 
@@ -99,19 +85,20 @@ acpi_set_firmware_waking_vector (
 }
 
 
-/******************************************************************************
+/*******************************************************************************
  *
  * FUNCTION:    acpi_get_firmware_waking_vector
  *
- * PARAMETERS:  *physical_address   - Output buffer where contents of
+ * PARAMETERS:  *physical_address   - Where the contents of
  *                                    the firmware_waking_vector field of
- *                                    the FACS will be stored.
+ *                                    the FACS will be returned.
  *
- * RETURN:      Status
+ * RETURN:      Status, vector
  *
- * DESCRIPTION: Access function for firmware_waking_vector field in FACS
+ * DESCRIPTION: Access function for the firmware_waking_vector field in FACS
  *
  ******************************************************************************/
+
 #ifdef ACPI_FUTURE_USAGE
 acpi_status
 acpi_get_firmware_waking_vector (
@@ -141,7 +128,7 @@ acpi_get_firmware_waking_vector (
 #endif
 
 
-/******************************************************************************
+/*******************************************************************************
  *
  * FUNCTION:    acpi_enter_sleep_state_prep
  *
@@ -215,7 +202,7 @@ acpi_enter_sleep_state_prep (
 		break;
 
 	default:
-		arg.integer.value = ACPI_SST_INDICATOR_OFF; /* Default is indicator off */
+		arg.integer.value = ACPI_SST_INDICATOR_OFF; /* Default is off */
 		break;
 	}
 
@@ -223,14 +210,15 @@ acpi_enter_sleep_state_prep (
 
 	status = acpi_evaluate_object (NULL, METHOD_NAME__SST, &arg_list, NULL);
 	if (ACPI_FAILURE (status) && status != AE_NOT_FOUND) {
-		 ACPI_REPORT_ERROR (("Method _SST failed, %s\n", acpi_format_exception (status)));
+		 ACPI_REPORT_ERROR (("Method _SST failed, %s\n",
+			acpi_format_exception (status)));
 	}
 
 	return_ACPI_STATUS (AE_OK);
 }
 
 
-/******************************************************************************
+/*******************************************************************************
  *
  * FUNCTION:    acpi_enter_sleep_state
  *
@@ -299,15 +287,18 @@ acpi_enter_sleep_state (
 
 	/* Get current value of PM1A control */
 
-	status = acpi_hw_register_read (ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_CONTROL, &PM1Acontrol);
+	status = acpi_hw_register_read (ACPI_MTX_DO_NOT_LOCK,
+			 ACPI_REGISTER_PM1_CONTROL, &PM1Acontrol);
 	if (ACPI_FAILURE (status)) {
 		return_ACPI_STATUS (status);
 	}
-	ACPI_DEBUG_PRINT ((ACPI_DB_INIT, "Entering sleep state [S%d]\n", sleep_state));
+	ACPI_DEBUG_PRINT ((ACPI_DB_INIT,
+		"Entering sleep state [S%d]\n", sleep_state));
 
 	/* Clear SLP_EN and SLP_TYP fields */
 
-	PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask | sleep_enable_reg_info->access_bit_mask);
+	PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask |
+			   sleep_enable_reg_info->access_bit_mask);
 	PM1Bcontrol = PM1Acontrol;
 
 	/* Insert SLP_TYP bits */
@@ -322,12 +313,14 @@ acpi_enter_sleep_state (
 
 	/* Write #1: fill in SLP_TYP data */
 
-	status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1A_CONTROL, PM1Acontrol);
+	status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
+			 ACPI_REGISTER_PM1A_CONTROL, PM1Acontrol);
 	if (ACPI_FAILURE (status)) {
 		return_ACPI_STATUS (status);
 	}
 
-	status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1B_CONTROL, PM1Bcontrol);
+	status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
+			 ACPI_REGISTER_PM1B_CONTROL, PM1Bcontrol);
 	if (ACPI_FAILURE (status)) {
 		return_ACPI_STATUS (status);
 	}
@@ -341,22 +334,25 @@ acpi_enter_sleep_state (
 
 	ACPI_FLUSH_CPU_CACHE ();
 
-	status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1A_CONTROL, PM1Acontrol);
+	status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
+			 ACPI_REGISTER_PM1A_CONTROL, PM1Acontrol);
 	if (ACPI_FAILURE (status)) {
 		return_ACPI_STATUS (status);
 	}
 
-	status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1B_CONTROL, PM1Bcontrol);
+	status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
+			 ACPI_REGISTER_PM1B_CONTROL, PM1Bcontrol);
 	if (ACPI_FAILURE (status)) {
 		return_ACPI_STATUS (status);
 	}
 
 	if (sleep_state > ACPI_STATE_S3) {
 		/*
-		 * We wanted to sleep > S3, but it didn't happen (by virtue of the fact that
-		 * we are still executing!)
+		 * We wanted to sleep > S3, but it didn't happen (by virtue of the
+		 * fact that we are still executing!)
 		 *
-		 * Wait ten seconds, then try again. This is to get S4/S5 to work on all machines.
+		 * Wait ten seconds, then try again. This is to get S4/S5 to work on
+		 * all machines.
 		 *
 		 * We wait so long to allow chipsets that poll this reg very slowly to
 		 * still read the right value. Ideally, this block would go
@@ -364,7 +360,8 @@ acpi_enter_sleep_state (
 		 */
 		acpi_os_stall (10000000);
 
-		status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_CONTROL,
+		status = acpi_hw_register_write (ACPI_MTX_DO_NOT_LOCK,
+				 ACPI_REGISTER_PM1_CONTROL,
 				 sleep_enable_reg_info->access_bit_mask);
 		if (ACPI_FAILURE (status)) {
 			return_ACPI_STATUS (status);
@@ -374,7 +371,8 @@ acpi_enter_sleep_state (
 	/* Wait until we enter sleep state */
 
 	do {
-		status = acpi_get_register (ACPI_BITREG_WAKE_STATUS, &in_value, ACPI_MTX_DO_NOT_LOCK);
+		status = acpi_get_register (ACPI_BITREG_WAKE_STATUS, &in_value,
+			ACPI_MTX_DO_NOT_LOCK);
 		if (ACPI_FAILURE (status)) {
 			return_ACPI_STATUS (status);
 		}
@@ -388,7 +386,7 @@ acpi_enter_sleep_state (
 EXPORT_SYMBOL(acpi_enter_sleep_state);
 
 
-/******************************************************************************
+/*******************************************************************************
  *
  * FUNCTION:    acpi_enter_sleep_state_s4bios
  *
@@ -439,11 +437,13 @@ acpi_enter_sleep_state_s4bios (
 
 	ACPI_FLUSH_CPU_CACHE ();
 
-	status = acpi_os_write_port (acpi_gbl_FADT->smi_cmd, (u32) acpi_gbl_FADT->S4bios_req, 8);
+	status = acpi_os_write_port (acpi_gbl_FADT->smi_cmd,
+			 (u32) acpi_gbl_FADT->S4bios_req, 8);
 
 	do {
 		acpi_os_stall(1000);
-		status = acpi_get_register (ACPI_BITREG_WAKE_STATUS, &in_value, ACPI_MTX_DO_NOT_LOCK);
+		status = acpi_get_register (ACPI_BITREG_WAKE_STATUS, &in_value,
+			ACPI_MTX_DO_NOT_LOCK);
 		if (ACPI_FAILURE (status)) {
 			return_ACPI_STATUS (status);
 		}
@@ -454,7 +454,7 @@ acpi_enter_sleep_state_s4bios (
 EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios);
 
 
-/******************************************************************************
+/*******************************************************************************
  *
  * FUNCTION:    acpi_leave_sleep_state
  *
@@ -534,18 +534,21 @@ acpi_leave_sleep_state (
 	arg.integer.value = ACPI_SST_WAKING;
 	status = acpi_evaluate_object (NULL, METHOD_NAME__SST, &arg_list, NULL);
 	if (ACPI_FAILURE (status) && status != AE_NOT_FOUND) {
-		ACPI_REPORT_ERROR (("Method _SST failed, %s\n", acpi_format_exception (status)));
+		ACPI_REPORT_ERROR (("Method _SST failed, %s\n",
+			acpi_format_exception (status)));
 	}
 
 	arg.integer.value = sleep_state;
 	status = acpi_evaluate_object (NULL, METHOD_NAME__BFS, &arg_list, NULL);
 	if (ACPI_FAILURE (status) && status != AE_NOT_FOUND) {
-		ACPI_REPORT_ERROR (("Method _BFS failed, %s\n", acpi_format_exception (status)));
+		ACPI_REPORT_ERROR (("Method _BFS failed, %s\n",
+			acpi_format_exception (status)));
 	}
 
 	status = acpi_evaluate_object (NULL, METHOD_NAME__WAK, &arg_list, NULL);
 	if (ACPI_FAILURE (status) && status != AE_NOT_FOUND) {
-		ACPI_REPORT_ERROR (("Method _WAK failed, %s\n", acpi_format_exception (status)));
+		ACPI_REPORT_ERROR (("Method _WAK failed, %s\n",
+			acpi_format_exception (status)));
 	}
 	/* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
 
@@ -567,15 +570,19 @@ acpi_leave_sleep_state (
 
 	/* Enable power button */
 
-	(void) acpi_set_register(acpi_gbl_fixed_event_info[ACPI_EVENT_POWER_BUTTON].enable_register_id,
+	(void) acpi_set_register(
+			acpi_gbl_fixed_event_info[ACPI_EVENT_POWER_BUTTON].enable_register_id,
 			1, ACPI_MTX_DO_NOT_LOCK);
-	(void) acpi_set_register(acpi_gbl_fixed_event_info[ACPI_EVENT_POWER_BUTTON].status_register_id,
+
+	(void) acpi_set_register(
+			acpi_gbl_fixed_event_info[ACPI_EVENT_POWER_BUTTON].status_register_id,
 			1, ACPI_MTX_DO_NOT_LOCK);
 
 	arg.integer.value = ACPI_SST_WORKING;
 	status = acpi_evaluate_object (NULL, METHOD_NAME__SST, &arg_list, NULL);
 	if (ACPI_FAILURE (status) && status != AE_NOT_FOUND) {
-		ACPI_REPORT_ERROR (("Method _SST failed, %s\n", acpi_format_exception (status)));
+		ACPI_REPORT_ERROR (("Method _SST failed, %s\n",
+			acpi_format_exception (status)));
 	}
 
 	return_ACPI_STATUS (status);
diff --git a/drivers/acpi/hardware/hwtimer.c b/drivers/acpi/hardware/hwtimer.c
index 1906167d729..49d7b395322 100644
--- a/drivers/acpi/hardware/hwtimer.c
+++ b/drivers/acpi/hardware/hwtimer.c
@@ -43,7 +43,6 @@
  */
 
 #include <linux/module.h>
-
 #include <acpi/acpi.h>
 
 #define _COMPONENT          ACPI_HARDWARE
@@ -90,7 +89,7 @@ acpi_get_timer_resolution (
  *
  * PARAMETERS:  Ticks               - Where the timer value is returned
  *
- * RETURN:      Status and current ticks
+ * RETURN:      Status and current timer value (ticks)
  *
  * DESCRIPTION: Obtains current value of ACPI PM Timer (in ticks).
  *
@@ -199,5 +198,6 @@ acpi_get_timer_duration (
 	*time_elapsed = (u32) quotient;
 	return_ACPI_STATUS (status);
 }
+
 EXPORT_SYMBOL(acpi_get_timer_duration);