ACPICA: create acpica/ directory

also, delete sleep/ and delete ACPI_CFLAGS from Makefile

Signed-off-by: Len Brown <len.brown@intel.com>

15 files changed, 0 insertions, 8316 deletions

diff --git a/drivers/acpi/utilities/Makefile b/drivers/acpi/utilities/Makefile
deleted file mode 100644
index 66a71a54cb0..00000000000
--- a/drivers/acpi/utilities/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for all Linux ACPI interpreter subdirectories
-#
-
-obj-y := utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
-		utcopy.o utdelete.o utglobal.o utmath.o utobject.o \
-		utstate.o utmutex.o utobject.o utresrc.o
-
-EXTRA_CFLAGS += $(ACPI_CFLAGS)
diff --git a/drivers/acpi/utilities/utalloc.c b/drivers/acpi/utilities/utalloc.c
deleted file mode 100644
index 2a017b29aa4..00000000000
--- a/drivers/acpi/utilities/utalloc.c
+++ /dev/null
@@ -1,383 +0,0 @@
-/******************************************************************************
- *
- * Module Name: utalloc - local memory allocation routines
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-#include <acpi/acdebug.h>
-
-#define _COMPONENT          ACPI_UTILITIES
-ACPI_MODULE_NAME("utalloc")
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_create_caches
- *
- * PARAMETERS:  None
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Create all local caches
- *
- ******************************************************************************/
-acpi_status acpi_ut_create_caches(void)
-{
-	acpi_status status;
-
-	/* Object Caches, for frequently used objects */
-
-	status =
-	    acpi_os_create_cache("Acpi-Namespace",
-				 sizeof(struct acpi_namespace_node),
-				 ACPI_MAX_NAMESPACE_CACHE_DEPTH,
-				 &acpi_gbl_namespace_cache);
-	if (ACPI_FAILURE(status)) {
-		return (status);
-	}
-
-	status =
-	    acpi_os_create_cache("Acpi-State", sizeof(union acpi_generic_state),
-				 ACPI_MAX_STATE_CACHE_DEPTH,
-				 &acpi_gbl_state_cache);
-	if (ACPI_FAILURE(status)) {
-		return (status);
-	}
-
-	status =
-	    acpi_os_create_cache("Acpi-Parse",
-				 sizeof(struct acpi_parse_obj_common),
-				 ACPI_MAX_PARSE_CACHE_DEPTH,
-				 &acpi_gbl_ps_node_cache);
-	if (ACPI_FAILURE(status)) {
-		return (status);
-	}
-
-	status =
-	    acpi_os_create_cache("Acpi-ParseExt",
-				 sizeof(struct acpi_parse_obj_named),
-				 ACPI_MAX_EXTPARSE_CACHE_DEPTH,
-				 &acpi_gbl_ps_node_ext_cache);
-	if (ACPI_FAILURE(status)) {
-		return (status);
-	}
-
-	status =
-	    acpi_os_create_cache("Acpi-Operand",
-				 sizeof(union acpi_operand_object),
-				 ACPI_MAX_OBJECT_CACHE_DEPTH,
-				 &acpi_gbl_operand_cache);
-	if (ACPI_FAILURE(status)) {
-		return (status);
-	}
-#ifdef ACPI_DBG_TRACK_ALLOCATIONS
-
-	/* Memory allocation lists */
-
-	status = acpi_ut_create_list("Acpi-Global", 0, &acpi_gbl_global_list);
-	if (ACPI_FAILURE(status)) {
-		return (status);
-	}
-
-	status =
-	    acpi_ut_create_list("Acpi-Namespace",
-				sizeof(struct acpi_namespace_node),
-				&acpi_gbl_ns_node_list);
-	if (ACPI_FAILURE(status)) {
-		return (status);
-	}
-#endif
-
-	return (AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_delete_caches
- *
- * PARAMETERS:  None
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Purge and delete all local caches
- *
- ******************************************************************************/
-
-acpi_status acpi_ut_delete_caches(void)
-{
-#ifdef ACPI_DBG_TRACK_ALLOCATIONS
-	char buffer[7];
-
-	if (acpi_gbl_display_final_mem_stats) {
-		ACPI_STRCPY(buffer, "MEMORY");
-		(void)acpi_db_display_statistics(buffer);
-	}
-#endif
-
-	(void)acpi_os_delete_cache(acpi_gbl_namespace_cache);
-	acpi_gbl_namespace_cache = NULL;
-
-	(void)acpi_os_delete_cache(acpi_gbl_state_cache);
-	acpi_gbl_state_cache = NULL;
-
-	(void)acpi_os_delete_cache(acpi_gbl_operand_cache);
-	acpi_gbl_operand_cache = NULL;
-
-	(void)acpi_os_delete_cache(acpi_gbl_ps_node_cache);
-	acpi_gbl_ps_node_cache = NULL;
-
-	(void)acpi_os_delete_cache(acpi_gbl_ps_node_ext_cache);
-	acpi_gbl_ps_node_ext_cache = NULL;
-
-#ifdef ACPI_DBG_TRACK_ALLOCATIONS
-
-	/* Debug only - display leftover memory allocation, if any */
-
-	acpi_ut_dump_allocations(ACPI_UINT32_MAX, NULL);
-
-	/* Free memory lists */
-
-	ACPI_FREE(acpi_gbl_global_list);
-	acpi_gbl_global_list = NULL;
-
-	ACPI_FREE(acpi_gbl_ns_node_list);
-	acpi_gbl_ns_node_list = NULL;
-#endif
-
-	return (AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_validate_buffer
- *
- * PARAMETERS:  Buffer              - Buffer descriptor to be validated
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Perform parameter validation checks on an struct acpi_buffer
- *
- ******************************************************************************/
-
-acpi_status acpi_ut_validate_buffer(struct acpi_buffer * buffer)
-{
-
-	/* Obviously, the structure pointer must be valid */
-
-	if (!buffer) {
-		return (AE_BAD_PARAMETER);
-	}
-
-	/* Special semantics for the length */
-
-	if ((buffer->length == ACPI_NO_BUFFER) ||
-	    (buffer->length == ACPI_ALLOCATE_BUFFER) ||
-	    (buffer->length == ACPI_ALLOCATE_LOCAL_BUFFER)) {
-		return (AE_OK);
-	}
-
-	/* Length is valid, the buffer pointer must be also */
-
-	if (!buffer->pointer) {
-		return (AE_BAD_PARAMETER);
-	}
-
-	return (AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_initialize_buffer
- *
- * PARAMETERS:  Buffer              - Buffer to be validated
- *              required_length     - Length needed
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Validate that the buffer is of the required length or
- *              allocate a new buffer. Returned buffer is always zeroed.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_initialize_buffer(struct acpi_buffer * buffer,
-			  acpi_size required_length)
-{
-	acpi_size input_buffer_length;
-
-	/* Parameter validation */
-
-	if (!buffer || !required_length) {
-		return (AE_BAD_PARAMETER);
-	}
-
-	/*
-	 * Buffer->Length is used as both an input and output parameter. Get the
-	 * input actual length and set the output required buffer length.
-	 */
-	input_buffer_length = buffer->length;
-	buffer->length = required_length;
-
-	/*
-	 * The input buffer length contains the actual buffer length, or the type
-	 * of buffer to be allocated by this routine.
-	 */
-	switch (input_buffer_length) {
-	case ACPI_NO_BUFFER:
-
-		/* Return the exception (and the required buffer length) */
-
-		return (AE_BUFFER_OVERFLOW);
-
-	case ACPI_ALLOCATE_BUFFER:
-
-		/* Allocate a new buffer */
-
-		buffer->pointer = acpi_os_allocate(required_length);
-		break;
-
-	case ACPI_ALLOCATE_LOCAL_BUFFER:
-
-		/* Allocate a new buffer with local interface to allow tracking */
-
-		buffer->pointer = ACPI_ALLOCATE(required_length);
-		break;
-
-	default:
-
-		/* Existing buffer: Validate the size of the buffer */
-
-		if (input_buffer_length < required_length) {
-			return (AE_BUFFER_OVERFLOW);
-		}
-		break;
-	}
-
-	/* Validate allocation from above or input buffer pointer */
-
-	if (!buffer->pointer) {
-		return (AE_NO_MEMORY);
-	}
-
-	/* Have a valid buffer, clear it */
-
-	ACPI_MEMSET(buffer->pointer, 0, required_length);
-	return (AE_OK);
-}
-
-#ifdef NOT_USED_BY_LINUX
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_allocate
- *
- * PARAMETERS:  Size                - Size of the allocation
- *              Component           - Component type of caller
- *              Module              - Source file name of caller
- *              Line                - Line number of caller
- *
- * RETURN:      Address of the allocated memory on success, NULL on failure.
- *
- * DESCRIPTION: Subsystem equivalent of malloc.
- *
- ******************************************************************************/
-
-void *acpi_ut_allocate(acpi_size size,
-		       u32 component, const char *module, u32 line)
-{
-	void *allocation;
-
-	ACPI_FUNCTION_TRACE_U32(ut_allocate, size);
-
-	/* Check for an inadvertent size of zero bytes */
-
-	if (!size) {
-		ACPI_WARNING((module, line,
-			      "Attempt to allocate zero bytes, allocating 1 byte"));
-		size = 1;
-	}
-
-	allocation = acpi_os_allocate(size);
-	if (!allocation) {
-
-		/* Report allocation error */
-
-		ACPI_WARNING((module, line,
-			      "Could not allocate size %X", (u32) size));
-
-		return_PTR(NULL);
-	}
-
-	return_PTR(allocation);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_allocate_zeroed
- *
- * PARAMETERS:  Size                - Size of the allocation
- *              Component           - Component type of caller
- *              Module              - Source file name of caller
- *              Line                - Line number of caller
- *
- * RETURN:      Address of the allocated memory on success, NULL on failure.
- *
- * DESCRIPTION: Subsystem equivalent of calloc. Allocate and zero memory.
- *
- ******************************************************************************/
-
-void *acpi_ut_allocate_zeroed(acpi_size size,
-			      u32 component, const char *module, u32 line)
-{
-	void *allocation;
-
-	ACPI_FUNCTION_ENTRY();
-
-	allocation = acpi_ut_allocate(size, component, module, line);
-	if (allocation) {
-
-		/* Clear the memory block */
-
-		ACPI_MEMSET(allocation, 0, size);
-	}
-
-	return (allocation);
-}
-#endif
diff --git a/drivers/acpi/utilities/utcopy.c b/drivers/acpi/utilities/utcopy.c
deleted file mode 100644
index e6f3002312e..00000000000
--- a/drivers/acpi/utilities/utcopy.c
+++ /dev/null
@@ -1,970 +0,0 @@
-/******************************************************************************
- *
- * Module Name: utcopy - Internal to external object translation utilities
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-#include <acpi/acnamesp.h>
-
-
-#define _COMPONENT          ACPI_UTILITIES
-ACPI_MODULE_NAME("utcopy")
-
-/* Local prototypes */
-static acpi_status
-acpi_ut_copy_isimple_to_esimple(union acpi_operand_object *internal_object,
-				union acpi_object *external_object,
-				u8 * data_space, acpi_size * buffer_space_used);
-
-static acpi_status
-acpi_ut_copy_ielement_to_ielement(u8 object_type,
-				  union acpi_operand_object *source_object,
-				  union acpi_generic_state *state,
-				  void *context);
-
-static acpi_status
-acpi_ut_copy_ipackage_to_epackage(union acpi_operand_object *internal_object,
-				  u8 * buffer, acpi_size * space_used);
-
-static acpi_status
-acpi_ut_copy_esimple_to_isimple(union acpi_object *user_obj,
-				union acpi_operand_object **return_obj);
-
-static acpi_status
-acpi_ut_copy_epackage_to_ipackage(union acpi_object *external_object,
-				  union acpi_operand_object **internal_object);
-
-static acpi_status
-acpi_ut_copy_simple_object(union acpi_operand_object *source_desc,
-			   union acpi_operand_object *dest_desc);
-
-static acpi_status
-acpi_ut_copy_ielement_to_eelement(u8 object_type,
-				  union acpi_operand_object *source_object,
-				  union acpi_generic_state *state,
-				  void *context);
-
-static acpi_status
-acpi_ut_copy_ipackage_to_ipackage(union acpi_operand_object *source_obj,
-				  union acpi_operand_object *dest_obj,
-				  struct acpi_walk_state *walk_state);
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_copy_isimple_to_esimple
- *
- * PARAMETERS:  internal_object     - Source object to be copied
- *              external_object     - Where to return the copied object
- *              data_space          - Where object data is returned (such as
- *                                    buffer and string data)
- *              buffer_space_used   - Length of data_space that was used
- *
- * RETURN:      Status
- *
- * DESCRIPTION: This function is called to copy a simple internal object to
- *              an external object.
- *
- *              The data_space buffer is assumed to have sufficient space for
- *              the object.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ut_copy_isimple_to_esimple(union acpi_operand_object *internal_object,
-				union acpi_object *external_object,
-				u8 * data_space, acpi_size * buffer_space_used)
-{
-	acpi_status status = AE_OK;
-
-	ACPI_FUNCTION_TRACE(ut_copy_isimple_to_esimple);
-
-	*buffer_space_used = 0;
-
-	/*
-	 * Check for NULL object case (could be an uninitialized
-	 * package element)
-	 */
-	if (!internal_object) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Always clear the external object */
-
-	ACPI_MEMSET(external_object, 0, sizeof(union acpi_object));
-
-	/*
-	 * In general, the external object will be the same type as
-	 * the internal object
-	 */
-	external_object->type = ACPI_GET_OBJECT_TYPE(internal_object);
-
-	/* However, only a limited number of external types are supported */
-
-	switch (ACPI_GET_OBJECT_TYPE(internal_object)) {
-	case ACPI_TYPE_STRING:
-
-		external_object->string.pointer = (char *)data_space;
-		external_object->string.length = internal_object->string.length;
-		*buffer_space_used = ACPI_ROUND_UP_TO_NATIVE_WORD((acpi_size)
-								  internal_object->
-								  string.
-								  length + 1);
-
-		ACPI_MEMCPY((void *)data_space,
-			    (void *)internal_object->string.pointer,
-			    (acpi_size) internal_object->string.length + 1);
-		break;
-
-	case ACPI_TYPE_BUFFER:
-
-		external_object->buffer.pointer = data_space;
-		external_object->buffer.length = internal_object->buffer.length;
-		*buffer_space_used =
-		    ACPI_ROUND_UP_TO_NATIVE_WORD(internal_object->string.
-						 length);
-
-		ACPI_MEMCPY((void *)data_space,
-			    (void *)internal_object->buffer.pointer,
-			    internal_object->buffer.length);
-		break;
-
-	case ACPI_TYPE_INTEGER:
-
-		external_object->integer.value = internal_object->integer.value;
-		break;
-
-	case ACPI_TYPE_LOCAL_REFERENCE:
-
-		/* This is an object reference. */
-
-		switch (internal_object->reference.class) {
-		case ACPI_REFCLASS_NAME:
-
-			/*
-			 * For namepath, return the object handle ("reference")
-			 * We are referring to the namespace node
-			 */
-			external_object->reference.handle =
-			    internal_object->reference.node;
-			external_object->reference.actual_type =
-			    acpi_ns_get_type(internal_object->reference.node);
-			break;
-
-		default:
-
-			/* All other reference types are unsupported */
-
-			return_ACPI_STATUS(AE_TYPE);
-		}
-		break;
-
-	case ACPI_TYPE_PROCESSOR:
-
-		external_object->processor.proc_id =
-		    internal_object->processor.proc_id;
-		external_object->processor.pblk_address =
-		    internal_object->processor.address;
-		external_object->processor.pblk_length =
-		    internal_object->processor.length;
-		break;
-
-	case ACPI_TYPE_POWER:
-
-		external_object->power_resource.system_level =
-		    internal_object->power_resource.system_level;
-
-		external_object->power_resource.resource_order =
-		    internal_object->power_resource.resource_order;
-		break;
-
-	default:
-		/*
-		 * There is no corresponding external object type
-		 */
-		ACPI_ERROR((AE_INFO,
-			    "Unsupported object type, cannot convert to external object: %s",
-			    acpi_ut_get_type_name(ACPI_GET_OBJECT_TYPE
-						  (internal_object))));
-
-		return_ACPI_STATUS(AE_SUPPORT);
-	}
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_copy_ielement_to_eelement
- *
- * PARAMETERS:  acpi_pkg_callback
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Copy one package element to another package element
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ut_copy_ielement_to_eelement(u8 object_type,
-				  union acpi_operand_object *source_object,
-				  union acpi_generic_state *state,
-				  void *context)
-{
-	acpi_status status = AE_OK;
-	struct acpi_pkg_info *info = (struct acpi_pkg_info *)context;
-	acpi_size object_space;
-	u32 this_index;
-	union acpi_object *target_object;
-
-	ACPI_FUNCTION_ENTRY();
-
-	this_index = state->pkg.index;
-	target_object = (union acpi_object *)
-	    &((union acpi_object *)(state->pkg.dest_object))->package.
-	    elements[this_index];
-
-	switch (object_type) {
-	case ACPI_COPY_TYPE_SIMPLE:
-
-		/*
-		 * This is a simple or null object
-		 */
-		status = acpi_ut_copy_isimple_to_esimple(source_object,
-							 target_object,
-							 info->free_space,
-							 &object_space);
-		if (ACPI_FAILURE(status)) {
-			return (status);
-		}
-		break;
-
-	case ACPI_COPY_TYPE_PACKAGE:
-
-		/*
-		 * Build the package object
-		 */
-		target_object->type = ACPI_TYPE_PACKAGE;
-		target_object->package.count = source_object->package.count;
-		target_object->package.elements =
-		    ACPI_CAST_PTR(union acpi_object, info->free_space);
-
-		/*
-		 * Pass the new package object back to the package walk routine
-		 */
-		state->pkg.this_target_obj = target_object;
-
-		/*
-		 * Save space for the array of objects (Package elements)
-		 * update the buffer length counter
-		 */
-		object_space = ACPI_ROUND_UP_TO_NATIVE_WORD((acpi_size)
-							    target_object->
-							    package.count *
-							    sizeof(union
-								   acpi_object));
-		break;
-
-	default:
-		return (AE_BAD_PARAMETER);
-	}
-
-	info->free_space += object_space;
-	info->length += object_space;
-	return (status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_copy_ipackage_to_epackage
- *
- * PARAMETERS:  internal_object     - Pointer to the object we are returning
- *              Buffer              - Where the object is returned
- *              space_used          - Where the object length is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: This function is called to place a package object in a user
- *              buffer.  A package object by definition contains other objects.
- *
- *              The buffer is assumed to have sufficient space for the object.
- *              The caller must have verified the buffer length needed using the
- *              acpi_ut_get_object_size function before calling this function.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ut_copy_ipackage_to_epackage(union acpi_operand_object *internal_object,
-				  u8 * buffer, acpi_size * space_used)
-{
-	union acpi_object *external_object;
-	acpi_status status;
-	struct acpi_pkg_info info;
-
-	ACPI_FUNCTION_TRACE(ut_copy_ipackage_to_epackage);
-
-	/*
-	 * First package at head of the buffer
-	 */
-	external_object = ACPI_CAST_PTR(union acpi_object, buffer);
-
-	/*
-	 * Free space begins right after the first package
-	 */
-	info.length = ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
-	info.free_space =
-	    buffer + ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
-	info.object_space = 0;
-	info.num_packages = 1;
-
-	external_object->type = ACPI_GET_OBJECT_TYPE(internal_object);
-	external_object->package.count = internal_object->package.count;
-	external_object->package.elements = ACPI_CAST_PTR(union acpi_object,
-							  info.free_space);
-
-	/*
-	 * Leave room for an array of ACPI_OBJECTS in the buffer
-	 * and move the free space past it
-	 */
-	info.length += (acpi_size) external_object->package.count *
-	    ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
-	info.free_space += external_object->package.count *
-	    ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object));
-
-	status = acpi_ut_walk_package_tree(internal_object, external_object,
-					   acpi_ut_copy_ielement_to_eelement,
-					   &info);
-
-	*space_used = info.length;
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_copy_iobject_to_eobject
- *
- * PARAMETERS:  internal_object     - The internal object to be converted
- *              buffer_ptr          - Where the object is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: This function is called to build an API object to be returned to
- *              the caller.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_copy_iobject_to_eobject(union acpi_operand_object *internal_object,
-				struct acpi_buffer *ret_buffer)
-{
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ut_copy_iobject_to_eobject);
-
-	if (ACPI_GET_OBJECT_TYPE(internal_object) == ACPI_TYPE_PACKAGE) {
-		/*
-		 * Package object:  Copy all subobjects (including
-		 * nested packages)
-		 */
-		status = acpi_ut_copy_ipackage_to_epackage(internal_object,
-							   ret_buffer->pointer,
-							   &ret_buffer->length);
-	} else {
-		/*
-		 * Build a simple object (no nested objects)
-		 */
-		status = acpi_ut_copy_isimple_to_esimple(internal_object,
-							 ACPI_CAST_PTR(union
-								       acpi_object,
-								       ret_buffer->
-								       pointer),
-							 ACPI_ADD_PTR(u8,
-								      ret_buffer->
-								      pointer,
-								      ACPI_ROUND_UP_TO_NATIVE_WORD
-								      (sizeof
-								       (union
-									acpi_object))),
-							 &ret_buffer->length);
-		/*
-		 * build simple does not include the object size in the length
-		 * so we add it in here
-		 */
-		ret_buffer->length += sizeof(union acpi_object);
-	}
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_copy_esimple_to_isimple
- *
- * PARAMETERS:  external_object     - The external object to be converted
- *              ret_internal_object - Where the internal object is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: This function copies an external object to an internal one.
- *              NOTE: Pointers can be copied, we don't need to copy data.
- *              (The pointers have to be valid in our address space no matter
- *              what we do with them!)
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ut_copy_esimple_to_isimple(union acpi_object *external_object,
-				union acpi_operand_object **ret_internal_object)
-{
-	union acpi_operand_object *internal_object;
-
-	ACPI_FUNCTION_TRACE(ut_copy_esimple_to_isimple);
-
-	/*
-	 * Simple types supported are: String, Buffer, Integer
-	 */
-	switch (external_object->type) {
-	case ACPI_TYPE_STRING:
-	case ACPI_TYPE_BUFFER:
-	case ACPI_TYPE_INTEGER:
-	case ACPI_TYPE_LOCAL_REFERENCE:
-
-		internal_object = acpi_ut_create_internal_object((u8)
-								 external_object->
-								 type);
-		if (!internal_object) {
-			return_ACPI_STATUS(AE_NO_MEMORY);
-		}
-		break;
-
-	case ACPI_TYPE_ANY:	/* This is the case for a NULL object */
-
-		*ret_internal_object = NULL;
-		return_ACPI_STATUS(AE_OK);
-
-	default:
-		/* All other types are not supported */
-
-		ACPI_ERROR((AE_INFO,
-			    "Unsupported object type, cannot convert to internal object: %s",
-			    acpi_ut_get_type_name(external_object->type)));
-
-		return_ACPI_STATUS(AE_SUPPORT);
-	}
-
-	/* Must COPY string and buffer contents */
-
-	switch (external_object->type) {
-	case ACPI_TYPE_STRING:
-
-		internal_object->string.pointer =
-		    ACPI_ALLOCATE_ZEROED((acpi_size) external_object->string.
-					 length + 1);
-		if (!internal_object->string.pointer) {
-			goto error_exit;
-		}
-
-		ACPI_MEMCPY(internal_object->string.pointer,
-			    external_object->string.pointer,
-			    external_object->string.length);
-
-		internal_object->string.length = external_object->string.length;
-		break;
-
-	case ACPI_TYPE_BUFFER:
-
-		internal_object->buffer.pointer =
-		    ACPI_ALLOCATE_ZEROED(external_object->buffer.length);
-		if (!internal_object->buffer.pointer) {
-			goto error_exit;
-		}
-
-		ACPI_MEMCPY(internal_object->buffer.pointer,
-			    external_object->buffer.pointer,
-			    external_object->buffer.length);
-
-		internal_object->buffer.length = external_object->buffer.length;
-
-		/* Mark buffer data valid */
-
-		internal_object->buffer.flags |= AOPOBJ_DATA_VALID;
-		break;
-
-	case ACPI_TYPE_INTEGER:
-
-		internal_object->integer.value = external_object->integer.value;
-		break;
-
-	case ACPI_TYPE_LOCAL_REFERENCE:
-
-		/* TBD: should validate incoming handle */
-
-		internal_object->reference.class = ACPI_REFCLASS_NAME;
-		internal_object->reference.node =
-		    external_object->reference.handle;
-		break;
-
-	default:
-		/* Other types can't get here */
-		break;
-	}
-
-	*ret_internal_object = internal_object;
-	return_ACPI_STATUS(AE_OK);
-
-      error_exit:
-	acpi_ut_remove_reference(internal_object);
-	return_ACPI_STATUS(AE_NO_MEMORY);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_copy_epackage_to_ipackage
- *
- * PARAMETERS:  external_object     - The external object to be converted
- *              internal_object     - Where the internal object is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Copy an external package object to an internal package.
- *              Handles nested packages.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ut_copy_epackage_to_ipackage(union acpi_object *external_object,
-				  union acpi_operand_object **internal_object)
-{
-	acpi_status status = AE_OK;
-	union acpi_operand_object *package_object;
-	union acpi_operand_object **package_elements;
-	u32 i;
-
-	ACPI_FUNCTION_TRACE(ut_copy_epackage_to_ipackage);
-
-	/* Create the package object */
-
-	package_object =
-	    acpi_ut_create_package_object(external_object->package.count);
-	if (!package_object) {
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
-
-	package_elements = package_object->package.elements;
-
-	/*
-	 * Recursive implementation. Probably ok, since nested external packages
-	 * as parameters should be very rare.
-	 */
-	for (i = 0; i < external_object->package.count; i++) {
-		status =
-		    acpi_ut_copy_eobject_to_iobject(&external_object->package.
-						    elements[i],
-						    &package_elements[i]);
-		if (ACPI_FAILURE(status)) {
-
-			/* Truncate package and delete it */
-
-			package_object->package.count = i;
-			package_elements[i] = NULL;
-			acpi_ut_remove_reference(package_object);
-			return_ACPI_STATUS(status);
-		}
-	}
-
-	/* Mark package data valid */
-
-	package_object->package.flags |= AOPOBJ_DATA_VALID;
-
-	*internal_object = package_object;
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_copy_eobject_to_iobject
- *
- * PARAMETERS:  external_object     - The external object to be converted
- *              internal_object     - Where the internal object is returned
- *
- * RETURN:      Status              - the status of the call
- *
- * DESCRIPTION: Converts an external object to an internal object.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_copy_eobject_to_iobject(union acpi_object *external_object,
-				union acpi_operand_object **internal_object)
-{
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ut_copy_eobject_to_iobject);
-
-	if (external_object->type == ACPI_TYPE_PACKAGE) {
-		status =
-		    acpi_ut_copy_epackage_to_ipackage(external_object,
-						      internal_object);
-	} else {
-		/*
-		 * Build a simple object (no nested objects)
-		 */
-		status =
-		    acpi_ut_copy_esimple_to_isimple(external_object,
-						    internal_object);
-	}
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_copy_simple_object
- *
- * PARAMETERS:  source_desc         - The internal object to be copied
- *              dest_desc           - New target object
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Simple copy of one internal object to another.  Reference count
- *              of the destination object is preserved.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ut_copy_simple_object(union acpi_operand_object *source_desc,
-			   union acpi_operand_object *dest_desc)
-{
-	u16 reference_count;
-	union acpi_operand_object *next_object;
-
-	/* Save fields from destination that we don't want to overwrite */
-
-	reference_count = dest_desc->common.reference_count;
-	next_object = dest_desc->common.next_object;
-
-	/* Copy the entire source object over the destination object */
-
-	ACPI_MEMCPY((char *)dest_desc, (char *)source_desc,
-		    sizeof(union acpi_operand_object));
-
-	/* Restore the saved fields */
-
-	dest_desc->common.reference_count = reference_count;
-	dest_desc->common.next_object = next_object;
-
-	/* New object is not static, regardless of source */
-
-	dest_desc->common.flags &= ~AOPOBJ_STATIC_POINTER;
-
-	/* Handle the objects with extra data */
-
-	switch (ACPI_GET_OBJECT_TYPE(dest_desc)) {
-	case ACPI_TYPE_BUFFER:
-		/*
-		 * Allocate and copy the actual buffer if and only if:
-		 * 1) There is a valid buffer pointer
-		 * 2) The buffer has a length > 0
-		 */
-		if ((source_desc->buffer.pointer) &&
-		    (source_desc->buffer.length)) {
-			dest_desc->buffer.pointer =
-			    ACPI_ALLOCATE(source_desc->buffer.length);
-			if (!dest_desc->buffer.pointer) {
-				return (AE_NO_MEMORY);
-			}
-
-			/* Copy the actual buffer data */
-
-			ACPI_MEMCPY(dest_desc->buffer.pointer,
-				    source_desc->buffer.pointer,
-				    source_desc->buffer.length);
-		}
-		break;
-
-	case ACPI_TYPE_STRING:
-		/*
-		 * Allocate and copy the actual string if and only if:
-		 * 1) There is a valid string pointer
-		 * (Pointer to a NULL string is allowed)
-		 */
-		if (source_desc->string.pointer) {
-			dest_desc->string.pointer =
-			    ACPI_ALLOCATE((acpi_size) source_desc->string.
-					  length + 1);
-			if (!dest_desc->string.pointer) {
-				return (AE_NO_MEMORY);
-			}
-
-			/* Copy the actual string data */
-
-			ACPI_MEMCPY(dest_desc->string.pointer,
-				    source_desc->string.pointer,
-				    (acpi_size) source_desc->string.length + 1);
-		}
-		break;
-
-	case ACPI_TYPE_LOCAL_REFERENCE:
-		/*
-		 * We copied the reference object, so we now must add a reference
-		 * to the object pointed to by the reference
-		 *
-		 * DDBHandle reference (from Load/load_table) is a special reference,
-		 * it does not have a Reference.Object, so does not need to
-		 * increase the reference count
-		 */
-		if (source_desc->reference.class == ACPI_REFCLASS_TABLE) {
-			break;
-		}
-
-		acpi_ut_add_reference(source_desc->reference.object);
-		break;
-
-	case ACPI_TYPE_REGION:
-		/*
-		 * We copied the Region Handler, so we now must add a reference
-		 */
-		if (dest_desc->region.handler) {
-			acpi_ut_add_reference(dest_desc->region.handler);
-		}
-		break;
-
-	default:
-		/* Nothing to do for other simple objects */
-		break;
-	}
-
-	return (AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_copy_ielement_to_ielement
- *
- * PARAMETERS:  acpi_pkg_callback
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Copy one package element to another package element
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ut_copy_ielement_to_ielement(u8 object_type,
-				  union acpi_operand_object *source_object,
-				  union acpi_generic_state *state,
-				  void *context)
-{
-	acpi_status status = AE_OK;
-	u32 this_index;
-	union acpi_operand_object **this_target_ptr;
-	union acpi_operand_object *target_object;
-
-	ACPI_FUNCTION_ENTRY();
-
-	this_index = state->pkg.index;
-	this_target_ptr = (union acpi_operand_object **)
-	    &state->pkg.dest_object->package.elements[this_index];
-
-	switch (object_type) {
-	case ACPI_COPY_TYPE_SIMPLE:
-
-		/* A null source object indicates a (legal) null package element */
-
-		if (source_object) {
-			/*
-			 * This is a simple object, just copy it
-			 */
-			target_object =
-			    acpi_ut_create_internal_object(ACPI_GET_OBJECT_TYPE
-							   (source_object));
-			if (!target_object) {
-				return (AE_NO_MEMORY);
-			}
-
-			status =
-			    acpi_ut_copy_simple_object(source_object,
-						       target_object);
-			if (ACPI_FAILURE(status)) {
-				goto error_exit;
-			}
-
-			*this_target_ptr = target_object;
-		} else {
-			/* Pass through a null element */
-
-			*this_target_ptr = NULL;
-		}
-		break;
-
-	case ACPI_COPY_TYPE_PACKAGE:
-
-		/*
-		 * This object is a package - go down another nesting level
-		 * Create and build the package object
-		 */
-		target_object =
-		    acpi_ut_create_package_object(source_object->package.count);
-		if (!target_object) {
-			return (AE_NO_MEMORY);
-		}
-
-		target_object->common.flags = source_object->common.flags;
-
-		/* Pass the new package object back to the package walk routine */
-
-		state->pkg.this_target_obj = target_object;
-
-		/* Store the object pointer in the parent package object */
-
-		*this_target_ptr = target_object;
-		break;
-
-	default:
-		return (AE_BAD_PARAMETER);
-	}
-
-	return (status);
-
-      error_exit:
-	acpi_ut_remove_reference(target_object);
-	return (status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_copy_ipackage_to_ipackage
- *
- * PARAMETERS:  *source_obj     - Pointer to the source package object
- *              *dest_obj       - Where the internal object is returned
- *
- * RETURN:      Status          - the status of the call
- *
- * DESCRIPTION: This function is called to copy an internal package object
- *              into another internal package object.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ut_copy_ipackage_to_ipackage(union acpi_operand_object *source_obj,
-				  union acpi_operand_object *dest_obj,
-				  struct acpi_walk_state *walk_state)
-{
-	acpi_status status = AE_OK;
-
-	ACPI_FUNCTION_TRACE(ut_copy_ipackage_to_ipackage);
-
-	dest_obj->common.type = ACPI_GET_OBJECT_TYPE(source_obj);
-	dest_obj->common.flags = source_obj->common.flags;
-	dest_obj->package.count = source_obj->package.count;
-
-	/*
-	 * Create the object array and walk the source package tree
-	 */
-	dest_obj->package.elements = ACPI_ALLOCATE_ZEROED(((acpi_size)
-							   source_obj->package.
-							   count +
-							   1) * sizeof(void *));
-	if (!dest_obj->package.elements) {
-		ACPI_ERROR((AE_INFO, "Package allocation failure"));
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
-
-	/*
-	 * Copy the package element-by-element by walking the package "tree".
-	 * This handles nested packages of arbitrary depth.
-	 */
-	status = acpi_ut_walk_package_tree(source_obj, dest_obj,
-					   acpi_ut_copy_ielement_to_ielement,
-					   walk_state);
-	if (ACPI_FAILURE(status)) {
-
-		/* On failure, delete the destination package object */
-
-		acpi_ut_remove_reference(dest_obj);
-	}
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_copy_iobject_to_iobject
- *
- * PARAMETERS:  walk_state          - Current walk state
- *              source_desc         - The internal object to be copied
- *              dest_desc           - Where the copied object is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Copy an internal object to a new internal object
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_copy_iobject_to_iobject(union acpi_operand_object *source_desc,
-				union acpi_operand_object **dest_desc,
-				struct acpi_walk_state *walk_state)
-{
-	acpi_status status = AE_OK;
-
-	ACPI_FUNCTION_TRACE(ut_copy_iobject_to_iobject);
-
-	/* Create the top level object */
-
-	*dest_desc =
-	    acpi_ut_create_internal_object(ACPI_GET_OBJECT_TYPE(source_desc));
-	if (!*dest_desc) {
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
-
-	/* Copy the object and possible subobjects */
-
-	if (ACPI_GET_OBJECT_TYPE(source_desc) == ACPI_TYPE_PACKAGE) {
-		status =
-		    acpi_ut_copy_ipackage_to_ipackage(source_desc, *dest_desc,
-						      walk_state);
-	} else {
-		status = acpi_ut_copy_simple_object(source_desc, *dest_desc);
-	}
-
-	return_ACPI_STATUS(status);
-}
diff --git a/drivers/acpi/utilities/utdebug.c b/drivers/acpi/utilities/utdebug.c
deleted file mode 100644
index 9a3538c497d..00000000000
--- a/drivers/acpi/utilities/utdebug.c
+++ /dev/null
@@ -1,651 +0,0 @@
-/******************************************************************************
- *
- * Module Name: utdebug - Debug print routines
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-
-#define _COMPONENT          ACPI_UTILITIES
-ACPI_MODULE_NAME("utdebug")
-#ifdef ACPI_DEBUG_OUTPUT
-static acpi_thread_id acpi_gbl_prev_thread_id;
-static char *acpi_gbl_fn_entry_str = "----Entry";
-static char *acpi_gbl_fn_exit_str = "----Exit-";
-
-/* Local prototypes */
-
-static const char *acpi_ut_trim_function_name(const char *function_name);
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_init_stack_ptr_trace
- *
- * PARAMETERS:  None
- *
- * RETURN:      None
- *
- * DESCRIPTION: Save the current CPU stack pointer at subsystem startup
- *
- ******************************************************************************/
-
-void acpi_ut_init_stack_ptr_trace(void)
-{
-	acpi_size current_sp;
-
-	acpi_gbl_entry_stack_pointer = &current_sp;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_track_stack_ptr
- *
- * PARAMETERS:  None
- *
- * RETURN:      None
- *
- * DESCRIPTION: Save the current CPU stack pointer
- *
- ******************************************************************************/
-
-void acpi_ut_track_stack_ptr(void)
-{
-	acpi_size current_sp;
-
-	if (&current_sp < acpi_gbl_lowest_stack_pointer) {
-		acpi_gbl_lowest_stack_pointer = &current_sp;
-	}
-
-	if (acpi_gbl_nesting_level > acpi_gbl_deepest_nesting) {
-		acpi_gbl_deepest_nesting = acpi_gbl_nesting_level;
-	}
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_trim_function_name
- *
- * PARAMETERS:  function_name       - Ascii string containing a procedure name
- *
- * RETURN:      Updated pointer to the function name
- *
- * DESCRIPTION: Remove the "Acpi" prefix from the function name, if present.
- *              This allows compiler macros such as __func__ to be used
- *              with no change to the debug output.
- *
- ******************************************************************************/
-
-static const char *acpi_ut_trim_function_name(const char *function_name)
-{
-
-	/* All Function names are longer than 4 chars, check is safe */
-
-	if (*(ACPI_CAST_PTR(u32, function_name)) == ACPI_PREFIX_MIXED) {
-
-		/* This is the case where the original source has not been modified */
-
-		return (function_name + 4);
-	}
-
-	if (*(ACPI_CAST_PTR(u32, function_name)) == ACPI_PREFIX_LOWER) {
-
-		/* This is the case where the source has been 'linuxized' */
-
-		return (function_name + 5);
-	}
-
-	return (function_name);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_debug_print
- *
- * PARAMETERS:  requested_debug_level - Requested debug print level
- *              line_number         - Caller's line number (for error output)
- *              function_name       - Caller's procedure name
- *              module_name         - Caller's module name
- *              component_id        - Caller's component ID
- *              Format              - Printf format field
- *              ...                 - Optional printf arguments
- *
- * RETURN:      None
- *
- * DESCRIPTION: Print error message with prefix consisting of the module name,
- *              line number, and component ID.
- *
- ******************************************************************************/
-
-void ACPI_INTERNAL_VAR_XFACE
-acpi_debug_print(u32 requested_debug_level,
-		 u32 line_number,
-		 const char *function_name,
-		 const char *module_name,
-		 u32 component_id, const char *format, ...)
-{
-	acpi_thread_id thread_id;
-	va_list args;
-
-	/*
-	 * Stay silent if the debug level or component ID is disabled
-	 */
-	if (!(requested_debug_level & acpi_dbg_level) ||
-	    !(component_id & acpi_dbg_layer)) {
-		return;
-	}
-
-	/*
-	 * Thread tracking and context switch notification
-	 */
-	thread_id = acpi_os_get_thread_id();
-	if (thread_id != acpi_gbl_prev_thread_id) {
-		if (ACPI_LV_THREADS & acpi_dbg_level) {
-			acpi_os_printf
-			    ("\n**** Context Switch from TID %lX to TID %lX ****\n\n",
-			     (unsigned long)acpi_gbl_prev_thread_id,
-			     (unsigned long)thread_id);
-		}
-
-		acpi_gbl_prev_thread_id = thread_id;
-	}
-
-	/*
-	 * Display the module name, current line number, thread ID (if requested),
-	 * current procedure nesting level, and the current procedure name
-	 */
-	acpi_os_printf("%8s-%04ld ", module_name, line_number);
-
-	if (ACPI_LV_THREADS & acpi_dbg_level) {
-		acpi_os_printf("[%04lX] ", (unsigned long)thread_id);
-	}
-
-	acpi_os_printf("[%02ld] %-22.22s: ",
-		       acpi_gbl_nesting_level,
-		       acpi_ut_trim_function_name(function_name));
-
-	va_start(args, format);
-	acpi_os_vprintf(format, args);
-	va_end(args);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_debug_print)
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_debug_print_raw
- *
- * PARAMETERS:  requested_debug_level - Requested debug print level
- *              line_number         - Caller's line number
- *              function_name       - Caller's procedure name
- *              module_name         - Caller's module name
- *              component_id        - Caller's component ID
- *              Format              - Printf format field
- *              ...                 - Optional printf arguments
- *
- * RETURN:      None
- *
- * DESCRIPTION: Print message with no headers.  Has same interface as
- *              debug_print so that the same macros can be used.
- *
- ******************************************************************************/
-void ACPI_INTERNAL_VAR_XFACE
-acpi_debug_print_raw(u32 requested_debug_level,
-		     u32 line_number,
-		     const char *function_name,
-		     const char *module_name,
-		     u32 component_id, const char *format, ...)
-{
-	va_list args;
-
-	if (!(requested_debug_level & acpi_dbg_level) ||
-	    !(component_id & acpi_dbg_layer)) {
-		return;
-	}
-
-	va_start(args, format);
-	acpi_os_vprintf(format, args);
-	va_end(args);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_debug_print_raw)
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_trace
- *
- * PARAMETERS:  line_number         - Caller's line number
- *              function_name       - Caller's procedure name
- *              module_name         - Caller's module name
- *              component_id        - Caller's component ID
- *
- * RETURN:      None
- *
- * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
- *              set in debug_level
- *
- ******************************************************************************/
-void
-acpi_ut_trace(u32 line_number,
-	      const char *function_name,
-	      const char *module_name, u32 component_id)
-{
-
-	acpi_gbl_nesting_level++;
-	acpi_ut_track_stack_ptr();
-
-	acpi_debug_print(ACPI_LV_FUNCTIONS,
-			 line_number, function_name, module_name, component_id,
-			 "%s\n", acpi_gbl_fn_entry_str);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_ut_trace)
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_trace_ptr
- *
- * PARAMETERS:  line_number         - Caller's line number
- *              function_name       - Caller's procedure name
- *              module_name         - Caller's module name
- *              component_id        - Caller's component ID
- *              Pointer             - Pointer to display
- *
- * RETURN:      None
- *
- * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
- *              set in debug_level
- *
- ******************************************************************************/
-void
-acpi_ut_trace_ptr(u32 line_number,
-		  const char *function_name,
-		  const char *module_name, u32 component_id, void *pointer)
-{
-	acpi_gbl_nesting_level++;
-	acpi_ut_track_stack_ptr();
-
-	acpi_debug_print(ACPI_LV_FUNCTIONS,
-			 line_number, function_name, module_name, component_id,
-			 "%s %p\n", acpi_gbl_fn_entry_str, pointer);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_trace_str
- *
- * PARAMETERS:  line_number         - Caller's line number
- *              function_name       - Caller's procedure name
- *              module_name         - Caller's module name
- *              component_id        - Caller's component ID
- *              String              - Additional string to display
- *
- * RETURN:      None
- *
- * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
- *              set in debug_level
- *
- ******************************************************************************/
-
-void
-acpi_ut_trace_str(u32 line_number,
-		  const char *function_name,
-		  const char *module_name, u32 component_id, char *string)
-{
-
-	acpi_gbl_nesting_level++;
-	acpi_ut_track_stack_ptr();
-
-	acpi_debug_print(ACPI_LV_FUNCTIONS,
-			 line_number, function_name, module_name, component_id,
-			 "%s %s\n", acpi_gbl_fn_entry_str, string);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_trace_u32
- *
- * PARAMETERS:  line_number         - Caller's line number
- *              function_name       - Caller's procedure name
- *              module_name         - Caller's module name
- *              component_id        - Caller's component ID
- *              Integer             - Integer to display
- *
- * RETURN:      None
- *
- * DESCRIPTION: Function entry trace.  Prints only if TRACE_FUNCTIONS bit is
- *              set in debug_level
- *
- ******************************************************************************/
-
-void
-acpi_ut_trace_u32(u32 line_number,
-		  const char *function_name,
-		  const char *module_name, u32 component_id, u32 integer)
-{
-
-	acpi_gbl_nesting_level++;
-	acpi_ut_track_stack_ptr();
-
-	acpi_debug_print(ACPI_LV_FUNCTIONS,
-			 line_number, function_name, module_name, component_id,
-			 "%s %08X\n", acpi_gbl_fn_entry_str, integer);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_exit
- *
- * PARAMETERS:  line_number         - Caller's line number
- *              function_name       - Caller's procedure name
- *              module_name         - Caller's module name
- *              component_id        - Caller's component ID
- *
- * RETURN:      None
- *
- * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
- *              set in debug_level
- *
- ******************************************************************************/
-
-void
-acpi_ut_exit(u32 line_number,
-	     const char *function_name,
-	     const char *module_name, u32 component_id)
-{
-
-	acpi_debug_print(ACPI_LV_FUNCTIONS,
-			 line_number, function_name, module_name, component_id,
-			 "%s\n", acpi_gbl_fn_exit_str);
-
-	acpi_gbl_nesting_level--;
-}
-
-ACPI_EXPORT_SYMBOL(acpi_ut_exit)
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_status_exit
- *
- * PARAMETERS:  line_number         - Caller's line number
- *              function_name       - Caller's procedure name
- *              module_name         - Caller's module name
- *              component_id        - Caller's component ID
- *              Status              - Exit status code
- *
- * RETURN:      None
- *
- * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
- *              set in debug_level. Prints exit status also.
- *
- ******************************************************************************/
-void
-acpi_ut_status_exit(u32 line_number,
-		    const char *function_name,
-		    const char *module_name,
-		    u32 component_id, acpi_status status)
-{
-
-	if (ACPI_SUCCESS(status)) {
-		acpi_debug_print(ACPI_LV_FUNCTIONS,
-				 line_number, function_name, module_name,
-				 component_id, "%s %s\n", acpi_gbl_fn_exit_str,
-				 acpi_format_exception(status));
-	} else {
-		acpi_debug_print(ACPI_LV_FUNCTIONS,
-				 line_number, function_name, module_name,
-				 component_id, "%s ****Exception****: %s\n",
-				 acpi_gbl_fn_exit_str,
-				 acpi_format_exception(status));
-	}
-
-	acpi_gbl_nesting_level--;
-}
-
-ACPI_EXPORT_SYMBOL(acpi_ut_status_exit)
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_value_exit
- *
- * PARAMETERS:  line_number         - Caller's line number
- *              function_name       - Caller's procedure name
- *              module_name         - Caller's module name
- *              component_id        - Caller's component ID
- *              Value               - Value to be printed with exit msg
- *
- * RETURN:      None
- *
- * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
- *              set in debug_level. Prints exit value also.
- *
- ******************************************************************************/
-void
-acpi_ut_value_exit(u32 line_number,
-		   const char *function_name,
-		   const char *module_name,
-		   u32 component_id, acpi_integer value)
-{
-
-	acpi_debug_print(ACPI_LV_FUNCTIONS,
-			 line_number, function_name, module_name, component_id,
-			 "%s %8.8X%8.8X\n", acpi_gbl_fn_exit_str,
-			 ACPI_FORMAT_UINT64(value));
-
-	acpi_gbl_nesting_level--;
-}
-
-ACPI_EXPORT_SYMBOL(acpi_ut_value_exit)
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_ptr_exit
- *
- * PARAMETERS:  line_number         - Caller's line number
- *              function_name       - Caller's procedure name
- *              module_name         - Caller's module name
- *              component_id        - Caller's component ID
- *              Ptr                 - Pointer to display
- *
- * RETURN:      None
- *
- * DESCRIPTION: Function exit trace.  Prints only if TRACE_FUNCTIONS bit is
- *              set in debug_level. Prints exit value also.
- *
- ******************************************************************************/
-void
-acpi_ut_ptr_exit(u32 line_number,
-		 const char *function_name,
-		 const char *module_name, u32 component_id, u8 *ptr)
-{
-
-	acpi_debug_print(ACPI_LV_FUNCTIONS,
-			 line_number, function_name, module_name, component_id,
-			 "%s %p\n", acpi_gbl_fn_exit_str, ptr);
-
-	acpi_gbl_nesting_level--;
-}
-
-#endif
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_dump_buffer
- *
- * PARAMETERS:  Buffer              - Buffer to dump
- *              Count               - Amount to dump, in bytes
- *              Display             - BYTE, WORD, DWORD, or QWORD display
- *              component_iD        - Caller's component ID
- *
- * RETURN:      None
- *
- * DESCRIPTION: Generic dump buffer in both hex and ascii.
- *
- ******************************************************************************/
-
-void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display)
-{
-	u32 i = 0;
-	u32 j;
-	u32 temp32;
-	u8 buf_char;
-
-	if (!buffer) {
-		acpi_os_printf("Null Buffer Pointer in DumpBuffer!\n");
-		return;
-	}
-
-	if ((count < 4) || (count & 0x01)) {
-		display = DB_BYTE_DISPLAY;
-	}
-
-	/* Nasty little dump buffer routine! */
-
-	while (i < count) {
-
-		/* Print current offset */
-
-		acpi_os_printf("%6.4X: ", i);
-
-		/* Print 16 hex chars */
-
-		for (j = 0; j < 16;) {
-			if (i + j >= count) {
-
-				/* Dump fill spaces */
-
-				acpi_os_printf("%*s", ((display * 2) + 1), " ");
-				j += display;
-				continue;
-			}
-
-			switch (display) {
-			case DB_BYTE_DISPLAY:
-			default:	/* Default is BYTE display */
-
-				acpi_os_printf("%02X ",
-					       buffer[(acpi_size) i + j]);
-				break;
-
-			case DB_WORD_DISPLAY:
-
-				ACPI_MOVE_16_TO_32(&temp32,
-						   &buffer[(acpi_size) i + j]);
-				acpi_os_printf("%04X ", temp32);
-				break;
-
-			case DB_DWORD_DISPLAY:
-
-				ACPI_MOVE_32_TO_32(&temp32,
-						   &buffer[(acpi_size) i + j]);
-				acpi_os_printf("%08X ", temp32);
-				break;
-
-			case DB_QWORD_DISPLAY:
-
-				ACPI_MOVE_32_TO_32(&temp32,
-						   &buffer[(acpi_size) i + j]);
-				acpi_os_printf("%08X", temp32);
-
-				ACPI_MOVE_32_TO_32(&temp32,
-						   &buffer[(acpi_size) i + j +
-							   4]);
-				acpi_os_printf("%08X ", temp32);
-				break;
-			}
-
-			j += display;
-		}
-
-		/*
-		 * Print the ASCII equivalent characters but watch out for the bad
-		 * unprintable ones (printable chars are 0x20 through 0x7E)
-		 */
-		acpi_os_printf(" ");
-		for (j = 0; j < 16; j++) {
-			if (i + j >= count) {
-				acpi_os_printf("\n");
-				return;
-			}
-
-			buf_char = buffer[(acpi_size) i + j];
-			if (ACPI_IS_PRINT(buf_char)) {
-				acpi_os_printf("%c", buf_char);
-			} else {
-				acpi_os_printf(".");
-			}
-		}
-
-		/* Done with that line. */
-
-		acpi_os_printf("\n");
-		i += 16;
-	}
-
-	return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_dump_buffer
- *
- * PARAMETERS:  Buffer              - Buffer to dump
- *              Count               - Amount to dump, in bytes
- *              Display             - BYTE, WORD, DWORD, or QWORD display
- *              component_iD        - Caller's component ID
- *
- * RETURN:      None
- *
- * DESCRIPTION: Generic dump buffer in both hex and ascii.
- *
- ******************************************************************************/
-
-void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id)
-{
-
-	/* Only dump the buffer if tracing is enabled */
-
-	if (!((ACPI_LV_TABLES & acpi_dbg_level) &&
-	      (component_id & acpi_dbg_layer))) {
-		return;
-	}
-
-	acpi_ut_dump_buffer2(buffer, count, display);
-}
diff --git a/drivers/acpi/utilities/utdelete.c b/drivers/acpi/utilities/utdelete.c
deleted file mode 100644
index 5b4e3b1a752..00000000000
--- a/drivers/acpi/utilities/utdelete.c
+++ /dev/null
@@ -1,677 +0,0 @@
-/*******************************************************************************
- *
- * Module Name: utdelete - object deletion and reference count utilities
- *
- ******************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-#include <acpi/acinterp.h>
-#include <acpi/acnamesp.h>
-#include <acpi/acevents.h>
-
-#define _COMPONENT          ACPI_UTILITIES
-ACPI_MODULE_NAME("utdelete")
-
-/* Local prototypes */
-static void acpi_ut_delete_internal_obj(union acpi_operand_object *object);
-
-static void
-acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action);
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_delete_internal_obj
- *
- * PARAMETERS:  Object         - Object to be deleted
- *
- * RETURN:      None
- *
- * DESCRIPTION: Low level object deletion, after reference counts have been
- *              updated (All reference counts, including sub-objects!)
- *
- ******************************************************************************/
-
-static void acpi_ut_delete_internal_obj(union acpi_operand_object *object)
-{
-	void *obj_pointer = NULL;
-	union acpi_operand_object *handler_desc;
-	union acpi_operand_object *second_desc;
-	union acpi_operand_object *next_desc;
-
-	ACPI_FUNCTION_TRACE_PTR(ut_delete_internal_obj, object);
-
-	if (!object) {
-		return_VOID;
-	}
-
-	/*
-	 * Must delete or free any pointers within the object that are not
-	 * actual ACPI objects (for example, a raw buffer pointer).
-	 */
-	switch (ACPI_GET_OBJECT_TYPE(object)) {
-	case ACPI_TYPE_STRING:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-				  "**** String %p, ptr %p\n", object,
-				  object->string.pointer));
-
-		/* Free the actual string buffer */
-
-		if (!(object->common.flags & AOPOBJ_STATIC_POINTER)) {
-
-			/* But only if it is NOT a pointer into an ACPI table */
-
-			obj_pointer = object->string.pointer;
-		}
-		break;
-
-	case ACPI_TYPE_BUFFER:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-				  "**** Buffer %p, ptr %p\n", object,
-				  object->buffer.pointer));
-
-		/* Free the actual buffer */
-
-		if (!(object->common.flags & AOPOBJ_STATIC_POINTER)) {
-
-			/* But only if it is NOT a pointer into an ACPI table */
-
-			obj_pointer = object->buffer.pointer;
-		}
-		break;
-
-	case ACPI_TYPE_PACKAGE:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-				  " **** Package of count %X\n",
-				  object->package.count));
-
-		/*
-		 * Elements of the package are not handled here, they are deleted
-		 * separately
-		 */
-
-		/* Free the (variable length) element pointer array */
-
-		obj_pointer = object->package.elements;
-		break;
-
-		/*
-		 * These objects have a possible list of notify handlers.
-		 * Device object also may have a GPE block.
-		 */
-	case ACPI_TYPE_DEVICE:
-
-		if (object->device.gpe_block) {
-			(void)acpi_ev_delete_gpe_block(object->device.
-						       gpe_block);
-		}
-
-		/*lint -fallthrough */
-
-	case ACPI_TYPE_PROCESSOR:
-	case ACPI_TYPE_THERMAL:
-
-		/* Walk the notify handler list for this object */
-
-		handler_desc = object->common_notify.handler;
-		while (handler_desc) {
-			next_desc = handler_desc->address_space.next;
-			acpi_ut_remove_reference(handler_desc);
-			handler_desc = next_desc;
-		}
-		break;
-
-	case ACPI_TYPE_MUTEX:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-				  "***** Mutex %p, OS Mutex %p\n",
-				  object, object->mutex.os_mutex));
-
-		if (object == acpi_gbl_global_lock_mutex) {
-
-			/* Global Lock has extra semaphore */
-
-			(void)
-			    acpi_os_delete_semaphore
-			    (acpi_gbl_global_lock_semaphore);
-			acpi_gbl_global_lock_semaphore = NULL;
-
-			acpi_os_delete_mutex(object->mutex.os_mutex);
-			acpi_gbl_global_lock_mutex = NULL;
-		} else {
-			acpi_ex_unlink_mutex(object);
-			acpi_os_delete_mutex(object->mutex.os_mutex);
-		}
-		break;
-
-	case ACPI_TYPE_EVENT:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-				  "***** Event %p, OS Semaphore %p\n",
-				  object, object->event.os_semaphore));
-
-		(void)acpi_os_delete_semaphore(object->event.os_semaphore);
-		object->event.os_semaphore = NULL;
-		break;
-
-	case ACPI_TYPE_METHOD:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-				  "***** Method %p\n", object));
-
-		/* Delete the method mutex if it exists */
-
-		if (object->method.mutex) {
-			acpi_os_delete_mutex(object->method.mutex->mutex.
-					     os_mutex);
-			acpi_ut_delete_object_desc(object->method.mutex);
-			object->method.mutex = NULL;
-		}
-		break;
-
-	case ACPI_TYPE_REGION:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-				  "***** Region %p\n", object));
-
-		second_desc = acpi_ns_get_secondary_object(object);
-		if (second_desc) {
-			/*
-			 * Free the region_context if and only if the handler is one of the
-			 * default handlers -- and therefore, we created the context object
-			 * locally, it was not created by an external caller.
-			 */
-			handler_desc = object->region.handler;
-			if (handler_desc) {
-				if (handler_desc->address_space.handler_flags &
-				    ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
-
-					/* Deactivate region and free region context */
-
-					if (handler_desc->address_space.setup) {
-						(void)handler_desc->
-						    address_space.setup(object,
-									ACPI_REGION_DEACTIVATE,
-									handler_desc->
-									address_space.
-									context,
-									&second_desc->
-									extra.
-									region_context);
-					}
-				}
-
-				acpi_ut_remove_reference(handler_desc);
-			}
-
-			/* Now we can free the Extra object */
-
-			acpi_ut_delete_object_desc(second_desc);
-		}
-		break;
-
-	case ACPI_TYPE_BUFFER_FIELD:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-				  "***** Buffer Field %p\n", object));
-
-		second_desc = acpi_ns_get_secondary_object(object);
-		if (second_desc) {
-			acpi_ut_delete_object_desc(second_desc);
-		}
-		break;
-
-	case ACPI_TYPE_LOCAL_BANK_FIELD:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-				  "***** Bank Field %p\n", object));
-
-		second_desc = acpi_ns_get_secondary_object(object);
-		if (second_desc) {
-			acpi_ut_delete_object_desc(second_desc);
-		}
-		break;
-
-	default:
-		break;
-	}
-
-	/* Free any allocated memory (pointer within the object) found above */
-
-	if (obj_pointer) {
-		ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-				  "Deleting Object Subptr %p\n", obj_pointer));
-		ACPI_FREE(obj_pointer);
-	}
-
-	/* Now the object can be safely deleted */
-
-	ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Deleting Object %p [%s]\n",
-			  object, acpi_ut_get_object_type_name(object)));
-
-	acpi_ut_delete_object_desc(object);
-	return_VOID;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_delete_internal_object_list
- *
- * PARAMETERS:  obj_list        - Pointer to the list to be deleted
- *
- * RETURN:      None
- *
- * DESCRIPTION: This function deletes an internal object list, including both
- *              simple objects and package objects
- *
- ******************************************************************************/
-
-void acpi_ut_delete_internal_object_list(union acpi_operand_object **obj_list)
-{
-	union acpi_operand_object **internal_obj;
-
-	ACPI_FUNCTION_TRACE(ut_delete_internal_object_list);
-
-	/* Walk the null-terminated internal list */
-
-	for (internal_obj = obj_list; *internal_obj; internal_obj++) {
-		acpi_ut_remove_reference(*internal_obj);
-	}
-
-	/* Free the combined parameter pointer list and object array */
-
-	ACPI_FREE(obj_list);
-	return_VOID;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_update_ref_count
- *
- * PARAMETERS:  Object          - Object whose ref count is to be updated
- *              Action          - What to do
- *
- * RETURN:      New ref count
- *
- * DESCRIPTION: Modify the ref count and return it.
- *
- ******************************************************************************/
-
-static void
-acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action)
-{
-	u16 count;
-	u16 new_count;
-
-	ACPI_FUNCTION_NAME(ut_update_ref_count);
-
-	if (!object) {
-		return;
-	}
-
-	count = object->common.reference_count;
-	new_count = count;
-
-	/*
-	 * Perform the reference count action (increment, decrement, force delete)
-	 */
-	switch (action) {
-	case REF_INCREMENT:
-
-		new_count++;
-		object->common.reference_count = new_count;
-
-		ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-				  "Obj %p Refs=%X, [Incremented]\n",
-				  object, new_count));
-		break;
-
-	case REF_DECREMENT:
-
-		if (count < 1) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-					  "Obj %p Refs=%X, can't decrement! (Set to 0)\n",
-					  object, new_count));
-
-			new_count = 0;
-		} else {
-			new_count--;
-
-			ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-					  "Obj %p Refs=%X, [Decremented]\n",
-					  object, new_count));
-		}
-
-		if (ACPI_GET_OBJECT_TYPE(object) == ACPI_TYPE_METHOD) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-					  "Method Obj %p Refs=%X, [Decremented]\n",
-					  object, new_count));
-		}
-
-		object->common.reference_count = new_count;
-		if (new_count == 0) {
-			acpi_ut_delete_internal_obj(object);
-		}
-		break;
-
-	case REF_FORCE_DELETE:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-				  "Obj %p Refs=%X, Force delete! (Set to 0)\n",
-				  object, count));
-
-		new_count = 0;
-		object->common.reference_count = new_count;
-		acpi_ut_delete_internal_obj(object);
-		break;
-
-	default:
-
-		ACPI_ERROR((AE_INFO, "Unknown action (%X)", action));
-		break;
-	}
-
-	/*
-	 * Sanity check the reference count, for debug purposes only.
-	 * (A deleted object will have a huge reference count)
-	 */
-	if (count > ACPI_MAX_REFERENCE_COUNT) {
-		ACPI_WARNING((AE_INFO,
-			      "Large Reference Count (%X) in object %p", count,
-			      object));
-	}
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_update_object_reference
- *
- * PARAMETERS:  Object              - Increment ref count for this object
- *                                    and all sub-objects
- *              Action              - Either REF_INCREMENT or REF_DECREMENT or
- *                                    REF_FORCE_DELETE
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Increment the object reference count
- *
- * Object references are incremented when:
- * 1) An object is attached to a Node (namespace object)
- * 2) An object is copied (all subobjects must be incremented)
- *
- * Object references are decremented when:
- * 1) An object is detached from an Node
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
-{
-	acpi_status status = AE_OK;
-	union acpi_generic_state *state_list = NULL;
-	union acpi_operand_object *next_object = NULL;
-	union acpi_generic_state *state;
-	u32 i;
-
-	ACPI_FUNCTION_TRACE_PTR(ut_update_object_reference, object);
-
-	while (object) {
-
-		/* Make sure that this isn't a namespace handle */
-
-		if (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED) {
-			ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-					  "Object %p is NS handle\n", object));
-			return_ACPI_STATUS(AE_OK);
-		}
-
-		/*
-		 * All sub-objects must have their reference count incremented also.
-		 * Different object types have different subobjects.
-		 */
-		switch (ACPI_GET_OBJECT_TYPE(object)) {
-		case ACPI_TYPE_DEVICE:
-		case ACPI_TYPE_PROCESSOR:
-		case ACPI_TYPE_POWER:
-		case ACPI_TYPE_THERMAL:
-
-			/* Update the notify objects for these types (if present) */
-
-			acpi_ut_update_ref_count(object->common_notify.
-						 system_notify, action);
-			acpi_ut_update_ref_count(object->common_notify.
-						 device_notify, action);
-			break;
-
-		case ACPI_TYPE_PACKAGE:
-			/*
-			 * We must update all the sub-objects of the package,
-			 * each of whom may have their own sub-objects.
-			 */
-			for (i = 0; i < object->package.count; i++) {
-				/*
-				 * Push each element onto the stack for later processing.
-				 * Note: There can be null elements within the package,
-				 * these are simply ignored
-				 */
-				status =
-				    acpi_ut_create_update_state_and_push
-				    (object->package.elements[i], action,
-				     &state_list);
-				if (ACPI_FAILURE(status)) {
-					goto error_exit;
-				}
-			}
-			break;
-
-		case ACPI_TYPE_BUFFER_FIELD:
-
-			next_object = object->buffer_field.buffer_obj;
-			break;
-
-		case ACPI_TYPE_LOCAL_REGION_FIELD:
-
-			next_object = object->field.region_obj;
-			break;
-
-		case ACPI_TYPE_LOCAL_BANK_FIELD:
-
-			next_object = object->bank_field.bank_obj;
-			status =
-			    acpi_ut_create_update_state_and_push(object->
-								 bank_field.
-								 region_obj,
-								 action,
-								 &state_list);
-			if (ACPI_FAILURE(status)) {
-				goto error_exit;
-			}
-			break;
-
-		case ACPI_TYPE_LOCAL_INDEX_FIELD:
-
-			next_object = object->index_field.index_obj;
-			status =
-			    acpi_ut_create_update_state_and_push(object->
-								 index_field.
-								 data_obj,
-								 action,
-								 &state_list);
-			if (ACPI_FAILURE(status)) {
-				goto error_exit;
-			}
-			break;
-
-		case ACPI_TYPE_LOCAL_REFERENCE:
-			/*
-			 * The target of an Index (a package, string, or buffer) or a named
-			 * reference must track changes to the ref count of the index or
-			 * target object.
-			 */
-			if ((object->reference.class == ACPI_REFCLASS_INDEX) ||
-			    (object->reference.class == ACPI_REFCLASS_NAME)) {
-				next_object = object->reference.object;
-			}
-			break;
-
-		case ACPI_TYPE_REGION:
-		default:
-			break;	/* No subobjects for all other types */
-		}
-
-		/*
-		 * Now we can update the count in the main object. This can only
-		 * happen after we update the sub-objects in case this causes the
-		 * main object to be deleted.
-		 */
-		acpi_ut_update_ref_count(object, action);
-		object = NULL;
-
-		/* Move on to the next object to be updated */
-
-		if (next_object) {
-			object = next_object;
-			next_object = NULL;
-		} else if (state_list) {
-			state = acpi_ut_pop_generic_state(&state_list);
-			object = state->update.object;
-			acpi_ut_delete_generic_state(state);
-		}
-	}
-
-	return_ACPI_STATUS(AE_OK);
-
-      error_exit:
-
-	ACPI_EXCEPTION((AE_INFO, status,
-			"Could not update object reference count"));
-
-	/* Free any stacked Update State objects */
-
-	while (state_list) {
-		state = acpi_ut_pop_generic_state(&state_list);
-		acpi_ut_delete_generic_state(state);
-	}
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_add_reference
- *
- * PARAMETERS:  Object          - Object whose reference count is to be
- *                                incremented
- *
- * RETURN:      None
- *
- * DESCRIPTION: Add one reference to an ACPI object
- *
- ******************************************************************************/
-
-void acpi_ut_add_reference(union acpi_operand_object *object)
-{
-
-	ACPI_FUNCTION_TRACE_PTR(ut_add_reference, object);
-
-	/* Ensure that we have a valid object */
-
-	if (!acpi_ut_valid_internal_object(object)) {
-		return_VOID;
-	}
-
-	ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-			  "Obj %p Current Refs=%X [To Be Incremented]\n",
-			  object, object->common.reference_count));
-
-	/* Increment the reference count */
-
-	(void)acpi_ut_update_object_reference(object, REF_INCREMENT);
-	return_VOID;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_remove_reference
- *
- * PARAMETERS:  Object         - Object whose ref count will be decremented
- *
- * RETURN:      None
- *
- * DESCRIPTION: Decrement the reference count of an ACPI internal object
- *
- ******************************************************************************/
-
-void acpi_ut_remove_reference(union acpi_operand_object *object)
-{
-
-	ACPI_FUNCTION_TRACE_PTR(ut_remove_reference, object);
-
-	/*
-	 * Allow a NULL pointer to be passed in, just ignore it. This saves
-	 * each caller from having to check. Also, ignore NS nodes.
-	 *
-	 */
-	if (!object ||
-	    (ACPI_GET_DESCRIPTOR_TYPE(object) == ACPI_DESC_TYPE_NAMED)) {
-		return_VOID;
-	}
-
-	/* Ensure that we have a valid object */
-
-	if (!acpi_ut_valid_internal_object(object)) {
-		return_VOID;
-	}
-
-	ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS,
-			  "Obj %p Current Refs=%X [To Be Decremented]\n",
-			  object, object->common.reference_count));
-
-	/*
-	 * Decrement the reference count, and only actually delete the object
-	 * if the reference count becomes 0. (Must also decrement the ref count
-	 * of all subobjects!)
-	 */
-	(void)acpi_ut_update_object_reference(object, REF_DECREMENT);
-	return_VOID;
-}
diff --git a/drivers/acpi/utilities/uteval.c b/drivers/acpi/utilities/uteval.c
deleted file mode 100644
index e1e438cd54a..00000000000
--- a/drivers/acpi/utilities/uteval.c
+++ /dev/null
@@ -1,752 +0,0 @@
-/******************************************************************************
- *
- * Module Name: uteval - Object evaluation
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-#include <acpi/acnamesp.h>
-#include <acpi/acinterp.h>
-
-#define _COMPONENT          ACPI_UTILITIES
-ACPI_MODULE_NAME("uteval")
-
-/* Local prototypes */
-static void
-acpi_ut_copy_id_string(char *destination, char *source, acpi_size max_length);
-
-static acpi_status
-acpi_ut_translate_one_cid(union acpi_operand_object *obj_desc,
-			  struct acpi_compatible_id *one_cid);
-
-/*
- * Strings supported by the _OSI predefined (internal) method.
- */
-static char *acpi_interfaces_supported[] = {
-	/* Operating System Vendor Strings */
-
-	"Windows 2000",		/* Windows 2000 */
-	"Windows 2001",		/* Windows XP */
-	"Windows 2001 SP1",	/* Windows XP SP1 */
-	"Windows 2001 SP2",	/* Windows XP SP2 */
-	"Windows 2001.1",	/* Windows Server 2003 */
-	"Windows 2001.1 SP1",	/* Windows Server 2003 SP1 - Added 03/2006 */
-	"Windows 2006",		/* Windows Vista - Added 03/2006 */
-
-	/* Feature Group Strings */
-
-	"Extended Address Space Descriptor"
-	    /*
-	     * All "optional" feature group strings (features that are implemented
-	     * by the host) should be implemented in the host version of
-	     * acpi_os_validate_interface and should not be added here.
-	     */
-};
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_osi_implementation
- *
- * PARAMETERS:  walk_state          - Current walk state
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Implementation of the _OSI predefined control method
- *
- ******************************************************************************/
-
-acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state)
-{
-	acpi_status status;
-	union acpi_operand_object *string_desc;
-	union acpi_operand_object *return_desc;
-	u32 i;
-
-	ACPI_FUNCTION_TRACE(ut_osi_implementation);
-
-	/* Validate the string input argument */
-
-	string_desc = walk_state->arguments[0].object;
-	if (!string_desc || (string_desc->common.type != ACPI_TYPE_STRING)) {
-		return_ACPI_STATUS(AE_TYPE);
-	}
-
-	/* Create a return object */
-
-	return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
-	if (!return_desc) {
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
-
-	/* Default return value is SUPPORTED */
-
-	return_desc->integer.value = ACPI_UINT32_MAX;
-	walk_state->return_desc = return_desc;
-
-	/* Compare input string to static table of supported interfaces */
-
-	for (i = 0; i < ACPI_ARRAY_LENGTH(acpi_interfaces_supported); i++) {
-		if (!ACPI_STRCMP
-		    (string_desc->string.pointer,
-		     acpi_interfaces_supported[i])) {
-
-			/* The interface is supported */
-
-			return_ACPI_STATUS(AE_OK);
-		}
-	}
-
-	/*
-	 * Did not match the string in the static table, call the host OSL to
-	 * check for a match with one of the optional strings (such as
-	 * "Module Device", "3.0 Thermal Model", etc.)
-	 */
-	status = acpi_os_validate_interface(string_desc->string.pointer);
-	if (ACPI_SUCCESS(status)) {
-
-		/* The interface is supported */
-
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* The interface is not supported */
-
-	return_desc->integer.value = 0;
-	return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_osi_invalidate
- *
- * PARAMETERS:  interface_string
- *
- * RETURN:      Status
- *
- * DESCRIPTION: invalidate string in pre-defiend _OSI string list
- *
- ******************************************************************************/
-
-acpi_status acpi_osi_invalidate(char *interface)
-{
-	int i;
-
-	for (i = 0; i < ACPI_ARRAY_LENGTH(acpi_interfaces_supported); i++) {
-		if (!ACPI_STRCMP(interface, acpi_interfaces_supported[i])) {
-			*acpi_interfaces_supported[i] = '\0';
-			return AE_OK;
-		}
-	}
-	return AE_NOT_FOUND;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_evaluate_object
- *
- * PARAMETERS:  prefix_node         - Starting node
- *              Path                - Path to object from starting node
- *              expected_return_types - Bitmap of allowed return types
- *              return_desc         - Where a return value is stored
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Evaluates a namespace object and verifies the type of the
- *              return object.  Common code that simplifies accessing objects
- *              that have required return objects of fixed types.
- *
- *              NOTE: Internal function, no parameter validation
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_evaluate_object(struct acpi_namespace_node *prefix_node,
-			char *path,
-			u32 expected_return_btypes,
-			union acpi_operand_object **return_desc)
-{
-	struct acpi_evaluate_info *info;
-	acpi_status status;
-	u32 return_btype;
-
-	ACPI_FUNCTION_TRACE(ut_evaluate_object);
-
-	/* Allocate the evaluation information block */
-
-	info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
-	if (!info) {
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
-
-	info->prefix_node = prefix_node;
-	info->pathname = path;
-
-	/* Evaluate the object/method */
-
-	status = acpi_ns_evaluate(info);
-	if (ACPI_FAILURE(status)) {
-		if (status == AE_NOT_FOUND) {
-			ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-					  "[%4.4s.%s] was not found\n",
-					  acpi_ut_get_node_name(prefix_node),
-					  path));
-		} else {
-			ACPI_ERROR_METHOD("Method execution failed",
-					  prefix_node, path, status);
-		}
-
-		goto cleanup;
-	}
-
-	/* Did we get a return object? */
-
-	if (!info->return_object) {
-		if (expected_return_btypes) {
-			ACPI_ERROR_METHOD("No object was returned from",
-					  prefix_node, path, AE_NOT_EXIST);
-
-			status = AE_NOT_EXIST;
-		}
-
-		goto cleanup;
-	}
-
-	/* Map the return object type to the bitmapped type */
-
-	switch (ACPI_GET_OBJECT_TYPE(info->return_object)) {
-	case ACPI_TYPE_INTEGER:
-		return_btype = ACPI_BTYPE_INTEGER;
-		break;
-
-	case ACPI_TYPE_BUFFER:
-		return_btype = ACPI_BTYPE_BUFFER;
-		break;
-
-	case ACPI_TYPE_STRING:
-		return_btype = ACPI_BTYPE_STRING;
-		break;
-
-	case ACPI_TYPE_PACKAGE:
-		return_btype = ACPI_BTYPE_PACKAGE;
-		break;
-
-	default:
-		return_btype = 0;
-		break;
-	}
-
-	if ((acpi_gbl_enable_interpreter_slack) && (!expected_return_btypes)) {
-		/*
-		 * We received a return object, but one was not expected.  This can
-		 * happen frequently if the "implicit return" feature is enabled.
-		 * Just delete the return object and return AE_OK.
-		 */
-		acpi_ut_remove_reference(info->return_object);
-		goto cleanup;
-	}
-
-	/* Is the return object one of the expected types? */
-
-	if (!(expected_return_btypes & return_btype)) {
-		ACPI_ERROR_METHOD("Return object type is incorrect",
-				  prefix_node, path, AE_TYPE);
-
-		ACPI_ERROR((AE_INFO,
-			    "Type returned from %s was incorrect: %s, expected Btypes: %X",
-			    path,
-			    acpi_ut_get_object_type_name(info->return_object),
-			    expected_return_btypes));
-
-		/* On error exit, we must delete the return object */
-
-		acpi_ut_remove_reference(info->return_object);
-		status = AE_TYPE;
-		goto cleanup;
-	}
-
-	/* Object type is OK, return it */
-
-	*return_desc = info->return_object;
-
-      cleanup:
-	ACPI_FREE(info);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_evaluate_numeric_object
- *
- * PARAMETERS:  object_name         - Object name to be evaluated
- *              device_node         - Node for the device
- *              Address             - Where the value is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Evaluates a numeric namespace object for a selected device
- *              and stores result in *Address.
- *
- *              NOTE: Internal function, no parameter validation
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_evaluate_numeric_object(char *object_name,
-				struct acpi_namespace_node *device_node,
-				acpi_integer * address)
-{
-	union acpi_operand_object *obj_desc;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ut_evaluate_numeric_object);
-
-	status = acpi_ut_evaluate_object(device_node, object_name,
-					 ACPI_BTYPE_INTEGER, &obj_desc);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Get the returned Integer */
-
-	*address = obj_desc->integer.value;
-
-	/* On exit, we must delete the return object */
-
-	acpi_ut_remove_reference(obj_desc);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_copy_id_string
- *
- * PARAMETERS:  Destination         - Where to copy the string
- *              Source              - Source string
- *              max_length          - Length of the destination buffer
- *
- * RETURN:      None
- *
- * DESCRIPTION: Copies an ID string for the _HID, _CID, and _UID methods.
- *              Performs removal of a leading asterisk if present -- workaround
- *              for a known issue on a bunch of machines.
- *
- ******************************************************************************/
-
-static void
-acpi_ut_copy_id_string(char *destination, char *source, acpi_size max_length)
-{
-
-	/*
-	 * Workaround for ID strings that have a leading asterisk. This construct
-	 * is not allowed by the ACPI specification  (ID strings must be
-	 * alphanumeric), but enough existing machines have this embedded in their
-	 * ID strings that the following code is useful.
-	 */
-	if (*source == '*') {
-		source++;
-	}
-
-	/* Do the actual copy */
-
-	ACPI_STRNCPY(destination, source, max_length);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_execute_HID
- *
- * PARAMETERS:  device_node         - Node for the device
- *              Hid                 - Where the HID is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Executes the _HID control method that returns the hardware
- *              ID of the device.
- *
- *              NOTE: Internal function, no parameter validation
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
-		    struct acpica_device_id *hid)
-{
-	union acpi_operand_object *obj_desc;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ut_execute_HID);
-
-	status = acpi_ut_evaluate_object(device_node, METHOD_NAME__HID,
-					 ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING,
-					 &obj_desc);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
-
-		/* Convert the Numeric HID to string */
-
-		acpi_ex_eisa_id_to_string((u32) obj_desc->integer.value,
-					  hid->value);
-	} else {
-		/* Copy the String HID from the returned object */
-
-		acpi_ut_copy_id_string(hid->value, obj_desc->string.pointer,
-				       sizeof(hid->value));
-	}
-
-	/* On exit, we must delete the return object */
-
-	acpi_ut_remove_reference(obj_desc);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_translate_one_cid
- *
- * PARAMETERS:  obj_desc            - _CID object, must be integer or string
- *              one_cid             - Where the CID string is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Return a numeric or string _CID value as a string.
- *              (Compatible ID)
- *
- *              NOTE:  Assumes a maximum _CID string length of
- *                     ACPI_MAX_CID_LENGTH.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ut_translate_one_cid(union acpi_operand_object *obj_desc,
-			  struct acpi_compatible_id *one_cid)
-{
-
-	switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
-	case ACPI_TYPE_INTEGER:
-
-		/* Convert the Numeric CID to string */
-
-		acpi_ex_eisa_id_to_string((u32) obj_desc->integer.value,
-					  one_cid->value);
-		return (AE_OK);
-
-	case ACPI_TYPE_STRING:
-
-		if (obj_desc->string.length > ACPI_MAX_CID_LENGTH) {
-			return (AE_AML_STRING_LIMIT);
-		}
-
-		/* Copy the String CID from the returned object */
-
-		acpi_ut_copy_id_string(one_cid->value, obj_desc->string.pointer,
-				       ACPI_MAX_CID_LENGTH);
-		return (AE_OK);
-
-	default:
-
-		return (AE_TYPE);
-	}
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_execute_CID
- *
- * PARAMETERS:  device_node         - Node for the device
- *              return_cid_list     - Where the CID list is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Executes the _CID control method that returns one or more
- *              compatible hardware IDs for the device.
- *
- *              NOTE: Internal function, no parameter validation
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_execute_CID(struct acpi_namespace_node * device_node,
-		    struct acpi_compatible_id_list ** return_cid_list)
-{
-	union acpi_operand_object *obj_desc;
-	acpi_status status;
-	u32 count;
-	u32 size;
-	struct acpi_compatible_id_list *cid_list;
-	u32 i;
-
-	ACPI_FUNCTION_TRACE(ut_execute_CID);
-
-	/* Evaluate the _CID method for this device */
-
-	status = acpi_ut_evaluate_object(device_node, METHOD_NAME__CID,
-					 ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING
-					 | ACPI_BTYPE_PACKAGE, &obj_desc);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Get the number of _CIDs returned */
-
-	count = 1;
-	if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_PACKAGE) {
-		count = obj_desc->package.count;
-	}
-
-	/* Allocate a worst-case buffer for the _CIDs */
-
-	size = (((count - 1) * sizeof(struct acpi_compatible_id)) +
-		sizeof(struct acpi_compatible_id_list));
-
-	cid_list = ACPI_ALLOCATE_ZEROED((acpi_size) size);
-	if (!cid_list) {
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
-
-	/* Init CID list */
-
-	cid_list->count = count;
-	cid_list->size = size;
-
-	/*
-	 *  A _CID can return either a single compatible ID or a package of
-	 *  compatible IDs.  Each compatible ID can be one of the following:
-	 *  1) Integer (32 bit compressed EISA ID) or
-	 *  2) String (PCI ID format, e.g. "PCI\VEN_vvvv&DEV_dddd&SUBSYS_ssssssss")
-	 */
-
-	/* The _CID object can be either a single CID or a package (list) of CIDs */
-
-	if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_PACKAGE) {
-
-		/* Translate each package element */
-
-		for (i = 0; i < count; i++) {
-			status =
-			    acpi_ut_translate_one_cid(obj_desc->package.
-						      elements[i],
-						      &cid_list->id[i]);
-			if (ACPI_FAILURE(status)) {
-				break;
-			}
-		}
-	} else {
-		/* Only one CID, translate to a string */
-
-		status = acpi_ut_translate_one_cid(obj_desc, cid_list->id);
-	}
-
-	/* Cleanup on error */
-
-	if (ACPI_FAILURE(status)) {
-		ACPI_FREE(cid_list);
-	} else {
-		*return_cid_list = cid_list;
-	}
-
-	/* On exit, we must delete the _CID return object */
-
-	acpi_ut_remove_reference(obj_desc);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_execute_UID
- *
- * PARAMETERS:  device_node         - Node for the device
- *              Uid                 - Where the UID is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Executes the _UID control method that returns the hardware
- *              ID of the device.
- *
- *              NOTE: Internal function, no parameter validation
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
-		    struct acpica_device_id *uid)
-{
-	union acpi_operand_object *obj_desc;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ut_execute_UID);
-
-	status = acpi_ut_evaluate_object(device_node, METHOD_NAME__UID,
-					 ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING,
-					 &obj_desc);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) {
-
-		/* Convert the Numeric UID to string */
-
-		acpi_ex_unsigned_integer_to_string(obj_desc->integer.value,
-						   uid->value);
-	} else {
-		/* Copy the String UID from the returned object */
-
-		acpi_ut_copy_id_string(uid->value, obj_desc->string.pointer,
-				       sizeof(uid->value));
-	}
-
-	/* On exit, we must delete the return object */
-
-	acpi_ut_remove_reference(obj_desc);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_execute_STA
- *
- * PARAMETERS:  device_node         - Node for the device
- *              Flags               - Where the status flags are returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Executes _STA for selected device and stores results in
- *              *Flags.
- *
- *              NOTE: Internal function, no parameter validation
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_execute_STA(struct acpi_namespace_node *device_node, u32 * flags)
-{
-	union acpi_operand_object *obj_desc;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ut_execute_STA);
-
-	status = acpi_ut_evaluate_object(device_node, METHOD_NAME__STA,
-					 ACPI_BTYPE_INTEGER, &obj_desc);
-	if (ACPI_FAILURE(status)) {
-		if (AE_NOT_FOUND == status) {
-			ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-					  "_STA on %4.4s was not found, assuming device is present\n",
-					  acpi_ut_get_node_name(device_node)));
-
-			*flags = ACPI_UINT32_MAX;
-			status = AE_OK;
-		}
-
-		return_ACPI_STATUS(status);
-	}
-
-	/* Extract the status flags */
-
-	*flags = (u32) obj_desc->integer.value;
-
-	/* On exit, we must delete the return object */
-
-	acpi_ut_remove_reference(obj_desc);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_execute_Sxds
- *
- * PARAMETERS:  device_node         - Node for the device
- *              Flags               - Where the status flags are returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Executes _STA for selected device and stores results in
- *              *Flags.
- *
- *              NOTE: Internal function, no parameter validation
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_execute_sxds(struct acpi_namespace_node *device_node, u8 * highest)
-{
-	union acpi_operand_object *obj_desc;
-	acpi_status status;
-	u32 i;
-
-	ACPI_FUNCTION_TRACE(ut_execute_sxds);
-
-	for (i = 0; i < 4; i++) {
-		highest[i] = 0xFF;
-		status = acpi_ut_evaluate_object(device_node,
-						 ACPI_CAST_PTR(char,
-							       acpi_gbl_highest_dstate_names
-							       [i]),
-						 ACPI_BTYPE_INTEGER, &obj_desc);
-		if (ACPI_FAILURE(status)) {
-			if (status != AE_NOT_FOUND) {
-				ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-						  "%s on Device %4.4s, %s\n",
-						  ACPI_CAST_PTR(char,
-								acpi_gbl_highest_dstate_names
-								[i]),
-						  acpi_ut_get_node_name
-						  (device_node),
-						  acpi_format_exception
-						  (status)));
-
-				return_ACPI_STATUS(status);
-			}
-		} else {
-			/* Extract the Dstate value */
-
-			highest[i] = (u8) obj_desc->integer.value;
-
-			/* Delete the return object */
-
-			acpi_ut_remove_reference(obj_desc);
-		}
-	}
-
-	return_ACPI_STATUS(AE_OK);
-}
diff --git a/drivers/acpi/utilities/utglobal.c b/drivers/acpi/utilities/utglobal.c
deleted file mode 100644
index 3e28d8c4045..00000000000
--- a/drivers/acpi/utilities/utglobal.c
+++ /dev/null
@@ -1,823 +0,0 @@
-/******************************************************************************
- *
- * Module Name: utglobal - Global variables for the ACPI subsystem
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#define DEFINE_ACPI_GLOBALS
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-#include <acpi/acnamesp.h>
-
-#define _COMPONENT          ACPI_UTILITIES
-ACPI_MODULE_NAME("utglobal")
-
-/*******************************************************************************
- *
- * Static global variable initialization.
- *
- ******************************************************************************/
-/*
- * We want the debug switches statically initialized so they
- * are already set when the debugger is entered.
- */
-/* Debug switch - level and trace mask */
-u32 acpi_dbg_level = ACPI_DEBUG_DEFAULT;
-
-/* Debug switch - layer (component) mask */
-
-u32 acpi_dbg_layer = 0;
-u32 acpi_gbl_nesting_level = 0;
-
-/* Debugger globals */
-
-u8 acpi_gbl_db_terminate_threads = FALSE;
-u8 acpi_gbl_abort_method = FALSE;
-u8 acpi_gbl_method_executing = FALSE;
-
-/* System flags */
-
-u32 acpi_gbl_startup_flags = 0;
-
-/* System starts uninitialized */
-
-u8 acpi_gbl_shutdown = TRUE;
-
-const char *acpi_gbl_sleep_state_names[ACPI_S_STATE_COUNT] = {
-	"\\_S0_",
-	"\\_S1_",
-	"\\_S2_",
-	"\\_S3_",
-	"\\_S4_",
-	"\\_S5_"
-};
-
-const char *acpi_gbl_highest_dstate_names[4] = {
-	"_S1D",
-	"_S2D",
-	"_S3D",
-	"_S4D"
-};
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_format_exception
- *
- * PARAMETERS:  Status       - The acpi_status code to be formatted
- *
- * RETURN:      A string containing the exception text. A valid pointer is
- *              always returned.
- *
- * DESCRIPTION: This function translates an ACPI exception into an ASCII string
- *              It is here instead of utxface.c so it is always present.
- *
- ******************************************************************************/
-
-const char *acpi_format_exception(acpi_status status)
-{
-	const char *exception = NULL;
-
-	ACPI_FUNCTION_ENTRY();
-
-	exception = acpi_ut_validate_exception(status);
-	if (!exception) {
-
-		/* Exception code was not recognized */
-
-		ACPI_ERROR((AE_INFO,
-			    "Unknown exception code: 0x%8.8X", status));
-
-		exception = "UNKNOWN_STATUS_CODE";
-		dump_stack();
-	}
-
-	return (ACPI_CAST_PTR(const char, exception));
-}
-
-ACPI_EXPORT_SYMBOL(acpi_format_exception)
-
-/*******************************************************************************
- *
- * Namespace globals
- *
- ******************************************************************************/
-/*
- * Predefined ACPI Names (Built-in to the Interpreter)
- *
- * NOTES:
- * 1) _SB_ is defined to be a device to allow \_SB_._INI to be run
- *    during the initialization sequence.
- * 2) _TZ_ is defined to be a thermal zone in order to allow ASL code to
- *    perform a Notify() operation on it.
- */
-const struct acpi_predefined_names acpi_gbl_pre_defined_names[] = {
-	{"_GPE", ACPI_TYPE_LOCAL_SCOPE, NULL},
-	{"_PR_", ACPI_TYPE_LOCAL_SCOPE, NULL},
-	{"_SB_", ACPI_TYPE_DEVICE, NULL},
-	{"_SI_", ACPI_TYPE_LOCAL_SCOPE, NULL},
-	{"_TZ_", ACPI_TYPE_THERMAL, NULL},
-	{"_REV", ACPI_TYPE_INTEGER, (char *)ACPI_CA_SUPPORT_LEVEL},
-	{"_OS_", ACPI_TYPE_STRING, ACPI_OS_NAME},
-	{"_GL_", ACPI_TYPE_MUTEX, (char *)1},
-
-#if !defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY)
-	{"_OSI", ACPI_TYPE_METHOD, (char *)1},
-#endif
-
-	/* Table terminator */
-
-	{NULL, ACPI_TYPE_ANY, NULL}
-};
-
-/*
- * Properties of the ACPI Object Types, both internal and external.
- * The table is indexed by values of acpi_object_type
- */
-const u8 acpi_gbl_ns_properties[] = {
-	ACPI_NS_NORMAL,		/* 00 Any              */
-	ACPI_NS_NORMAL,		/* 01 Number           */
-	ACPI_NS_NORMAL,		/* 02 String           */
-	ACPI_NS_NORMAL,		/* 03 Buffer           */
-	ACPI_NS_NORMAL,		/* 04 Package          */
-	ACPI_NS_NORMAL,		/* 05 field_unit       */
-	ACPI_NS_NEWSCOPE,	/* 06 Device           */
-	ACPI_NS_NORMAL,		/* 07 Event            */
-	ACPI_NS_NEWSCOPE,	/* 08 Method           */
-	ACPI_NS_NORMAL,		/* 09 Mutex            */
-	ACPI_NS_NORMAL,		/* 10 Region           */
-	ACPI_NS_NEWSCOPE,	/* 11 Power            */
-	ACPI_NS_NEWSCOPE,	/* 12 Processor        */
-	ACPI_NS_NEWSCOPE,	/* 13 Thermal          */
-	ACPI_NS_NORMAL,		/* 14 buffer_field     */
-	ACPI_NS_NORMAL,		/* 15 ddb_handle       */
-	ACPI_NS_NORMAL,		/* 16 Debug Object     */
-	ACPI_NS_NORMAL,		/* 17 def_field        */
-	ACPI_NS_NORMAL,		/* 18 bank_field       */
-	ACPI_NS_NORMAL,		/* 19 index_field      */
-	ACPI_NS_NORMAL,		/* 20 Reference        */
-	ACPI_NS_NORMAL,		/* 21 Alias            */
-	ACPI_NS_NORMAL,		/* 22 method_alias     */
-	ACPI_NS_NORMAL,		/* 23 Notify           */
-	ACPI_NS_NORMAL,		/* 24 Address Handler  */
-	ACPI_NS_NEWSCOPE | ACPI_NS_LOCAL,	/* 25 Resource Desc    */
-	ACPI_NS_NEWSCOPE | ACPI_NS_LOCAL,	/* 26 Resource Field   */
-	ACPI_NS_NEWSCOPE,	/* 27 Scope            */
-	ACPI_NS_NORMAL,		/* 28 Extra            */
-	ACPI_NS_NORMAL,		/* 29 Data             */
-	ACPI_NS_NORMAL		/* 30 Invalid          */
-};
-
-/* Hex to ASCII conversion table */
-
-static const char acpi_gbl_hex_to_ascii[] = {
-	'0', '1', '2', '3', '4', '5', '6', '7',
-	'8', '9', 'A', 'B', 'C', 'D', 'E', 'F'
-};
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_hex_to_ascii_char
- *
- * PARAMETERS:  Integer             - Contains the hex digit
- *              Position            - bit position of the digit within the
- *                                    integer (multiple of 4)
- *
- * RETURN:      The converted Ascii character
- *
- * DESCRIPTION: Convert a hex digit to an Ascii character
- *
- ******************************************************************************/
-
-char acpi_ut_hex_to_ascii_char(acpi_integer integer, u32 position)
-{
-
-	return (acpi_gbl_hex_to_ascii[(integer >> position) & 0xF]);
-}
-
-/******************************************************************************
- *
- * Event and Hardware globals
- *
- ******************************************************************************/
-
-struct acpi_bit_register_info acpi_gbl_bit_register_info[ACPI_NUM_BITREG] = {
-	/* Name                                     Parent Register             Register Bit Position                   Register Bit Mask       */
-
-	/* ACPI_BITREG_TIMER_STATUS         */ {ACPI_REGISTER_PM1_STATUS,
-						ACPI_BITPOSITION_TIMER_STATUS,
-						ACPI_BITMASK_TIMER_STATUS},
-	/* ACPI_BITREG_BUS_MASTER_STATUS    */ {ACPI_REGISTER_PM1_STATUS,
-						ACPI_BITPOSITION_BUS_MASTER_STATUS,
-						ACPI_BITMASK_BUS_MASTER_STATUS},
-	/* ACPI_BITREG_GLOBAL_LOCK_STATUS   */ {ACPI_REGISTER_PM1_STATUS,
-						ACPI_BITPOSITION_GLOBAL_LOCK_STATUS,
-						ACPI_BITMASK_GLOBAL_LOCK_STATUS},
-	/* ACPI_BITREG_POWER_BUTTON_STATUS  */ {ACPI_REGISTER_PM1_STATUS,
-						ACPI_BITPOSITION_POWER_BUTTON_STATUS,
-						ACPI_BITMASK_POWER_BUTTON_STATUS},
-	/* ACPI_BITREG_SLEEP_BUTTON_STATUS  */ {ACPI_REGISTER_PM1_STATUS,
-						ACPI_BITPOSITION_SLEEP_BUTTON_STATUS,
-						ACPI_BITMASK_SLEEP_BUTTON_STATUS},
-	/* ACPI_BITREG_RT_CLOCK_STATUS      */ {ACPI_REGISTER_PM1_STATUS,
-						ACPI_BITPOSITION_RT_CLOCK_STATUS,
-						ACPI_BITMASK_RT_CLOCK_STATUS},
-	/* ACPI_BITREG_WAKE_STATUS          */ {ACPI_REGISTER_PM1_STATUS,
-						ACPI_BITPOSITION_WAKE_STATUS,
-						ACPI_BITMASK_WAKE_STATUS},
-	/* ACPI_BITREG_PCIEXP_WAKE_STATUS   */ {ACPI_REGISTER_PM1_STATUS,
-						ACPI_BITPOSITION_PCIEXP_WAKE_STATUS,
-						ACPI_BITMASK_PCIEXP_WAKE_STATUS},
-
-	/* ACPI_BITREG_TIMER_ENABLE         */ {ACPI_REGISTER_PM1_ENABLE,
-						ACPI_BITPOSITION_TIMER_ENABLE,
-						ACPI_BITMASK_TIMER_ENABLE},
-	/* ACPI_BITREG_GLOBAL_LOCK_ENABLE   */ {ACPI_REGISTER_PM1_ENABLE,
-						ACPI_BITPOSITION_GLOBAL_LOCK_ENABLE,
-						ACPI_BITMASK_GLOBAL_LOCK_ENABLE},
-	/* ACPI_BITREG_POWER_BUTTON_ENABLE  */ {ACPI_REGISTER_PM1_ENABLE,
-						ACPI_BITPOSITION_POWER_BUTTON_ENABLE,
-						ACPI_BITMASK_POWER_BUTTON_ENABLE},
-	/* ACPI_BITREG_SLEEP_BUTTON_ENABLE  */ {ACPI_REGISTER_PM1_ENABLE,
-						ACPI_BITPOSITION_SLEEP_BUTTON_ENABLE,
-						ACPI_BITMASK_SLEEP_BUTTON_ENABLE},
-	/* ACPI_BITREG_RT_CLOCK_ENABLE      */ {ACPI_REGISTER_PM1_ENABLE,
-						ACPI_BITPOSITION_RT_CLOCK_ENABLE,
-						ACPI_BITMASK_RT_CLOCK_ENABLE},
-	/* ACPI_BITREG_PCIEXP_WAKE_DISABLE  */ {ACPI_REGISTER_PM1_ENABLE,
-						ACPI_BITPOSITION_PCIEXP_WAKE_DISABLE,
-						ACPI_BITMASK_PCIEXP_WAKE_DISABLE},
-
-	/* ACPI_BITREG_SCI_ENABLE           */ {ACPI_REGISTER_PM1_CONTROL,
-						ACPI_BITPOSITION_SCI_ENABLE,
-						ACPI_BITMASK_SCI_ENABLE},
-	/* ACPI_BITREG_BUS_MASTER_RLD       */ {ACPI_REGISTER_PM1_CONTROL,
-						ACPI_BITPOSITION_BUS_MASTER_RLD,
-						ACPI_BITMASK_BUS_MASTER_RLD},
-	/* ACPI_BITREG_GLOBAL_LOCK_RELEASE  */ {ACPI_REGISTER_PM1_CONTROL,
-						ACPI_BITPOSITION_GLOBAL_LOCK_RELEASE,
-						ACPI_BITMASK_GLOBAL_LOCK_RELEASE},
-	/* ACPI_BITREG_SLEEP_TYPE_A         */ {ACPI_REGISTER_PM1_CONTROL,
-						ACPI_BITPOSITION_SLEEP_TYPE_X,
-						ACPI_BITMASK_SLEEP_TYPE_X},
-	/* ACPI_BITREG_SLEEP_TYPE_B         */ {ACPI_REGISTER_PM1_CONTROL,
-						ACPI_BITPOSITION_SLEEP_TYPE_X,
-						ACPI_BITMASK_SLEEP_TYPE_X},
-	/* ACPI_BITREG_SLEEP_ENABLE         */ {ACPI_REGISTER_PM1_CONTROL,
-						ACPI_BITPOSITION_SLEEP_ENABLE,
-						ACPI_BITMASK_SLEEP_ENABLE},
-
-	/* ACPI_BITREG_ARB_DIS              */ {ACPI_REGISTER_PM2_CONTROL,
-						ACPI_BITPOSITION_ARB_DISABLE,
-						ACPI_BITMASK_ARB_DISABLE}
-};
-
-struct acpi_fixed_event_info acpi_gbl_fixed_event_info[ACPI_NUM_FIXED_EVENTS] = {
-	/* ACPI_EVENT_PMTIMER       */ {ACPI_BITREG_TIMER_STATUS,
-					ACPI_BITREG_TIMER_ENABLE,
-					ACPI_BITMASK_TIMER_STATUS,
-					ACPI_BITMASK_TIMER_ENABLE},
-	/* ACPI_EVENT_GLOBAL        */ {ACPI_BITREG_GLOBAL_LOCK_STATUS,
-					ACPI_BITREG_GLOBAL_LOCK_ENABLE,
-					ACPI_BITMASK_GLOBAL_LOCK_STATUS,
-					ACPI_BITMASK_GLOBAL_LOCK_ENABLE},
-	/* ACPI_EVENT_POWER_BUTTON  */ {ACPI_BITREG_POWER_BUTTON_STATUS,
-					ACPI_BITREG_POWER_BUTTON_ENABLE,
-					ACPI_BITMASK_POWER_BUTTON_STATUS,
-					ACPI_BITMASK_POWER_BUTTON_ENABLE},
-	/* ACPI_EVENT_SLEEP_BUTTON  */ {ACPI_BITREG_SLEEP_BUTTON_STATUS,
-					ACPI_BITREG_SLEEP_BUTTON_ENABLE,
-					ACPI_BITMASK_SLEEP_BUTTON_STATUS,
-					ACPI_BITMASK_SLEEP_BUTTON_ENABLE},
-	/* ACPI_EVENT_RTC           */ {ACPI_BITREG_RT_CLOCK_STATUS,
-					ACPI_BITREG_RT_CLOCK_ENABLE,
-					ACPI_BITMASK_RT_CLOCK_STATUS,
-					ACPI_BITMASK_RT_CLOCK_ENABLE},
-};
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_region_name
- *
- * PARAMETERS:  None.
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Translate a Space ID into a name string (Debug only)
- *
- ******************************************************************************/
-
-/* Region type decoding */
-
-const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS] = {
-	"SystemMemory",
-	"SystemIO",
-	"PCI_Config",
-	"EmbeddedControl",
-	"SMBus",
-	"SystemCMOS",
-	"PCIBARTarget",
-	"DataTable"
-};
-
-char *acpi_ut_get_region_name(u8 space_id)
-{
-
-	if (space_id >= ACPI_USER_REGION_BEGIN) {
-		return ("UserDefinedRegion");
-	} else if (space_id >= ACPI_NUM_PREDEFINED_REGIONS) {
-		return ("InvalidSpaceId");
-	}
-
-	return (ACPI_CAST_PTR(char, acpi_gbl_region_types[space_id]));
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_event_name
- *
- * PARAMETERS:  None.
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Translate a Event ID into a name string (Debug only)
- *
- ******************************************************************************/
-
-/* Event type decoding */
-
-static const char *acpi_gbl_event_types[ACPI_NUM_FIXED_EVENTS] = {
-	"PM_Timer",
-	"GlobalLock",
-	"PowerButton",
-	"SleepButton",
-	"RealTimeClock",
-};
-
-char *acpi_ut_get_event_name(u32 event_id)
-{
-
-	if (event_id > ACPI_EVENT_MAX) {
-		return ("InvalidEventID");
-	}
-
-	return (ACPI_CAST_PTR(char, acpi_gbl_event_types[event_id]));
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_type_name
- *
- * PARAMETERS:  None.
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Translate a Type ID into a name string (Debug only)
- *
- ******************************************************************************/
-
-/*
- * Elements of acpi_gbl_ns_type_names below must match
- * one-to-one with values of acpi_object_type
- *
- * The type ACPI_TYPE_ANY (Untyped) is used as a "don't care" when searching;
- * when stored in a table it really means that we have thus far seen no
- * evidence to indicate what type is actually going to be stored for this entry.
- */
-static const char acpi_gbl_bad_type[] = "UNDEFINED";
-
-/* Printable names of the ACPI object types */
-
-static const char *acpi_gbl_ns_type_names[] = {
-	/* 00 */ "Untyped",
-	/* 01 */ "Integer",
-	/* 02 */ "String",
-	/* 03 */ "Buffer",
-	/* 04 */ "Package",
-	/* 05 */ "FieldUnit",
-	/* 06 */ "Device",
-	/* 07 */ "Event",
-	/* 08 */ "Method",
-	/* 09 */ "Mutex",
-	/* 10 */ "Region",
-	/* 11 */ "Power",
-	/* 12 */ "Processor",
-	/* 13 */ "Thermal",
-	/* 14 */ "BufferField",
-	/* 15 */ "DdbHandle",
-	/* 16 */ "DebugObject",
-	/* 17 */ "RegionField",
-	/* 18 */ "BankField",
-	/* 19 */ "IndexField",
-	/* 20 */ "Reference",
-	/* 21 */ "Alias",
-	/* 22 */ "MethodAlias",
-	/* 23 */ "Notify",
-	/* 24 */ "AddrHandler",
-	/* 25 */ "ResourceDesc",
-	/* 26 */ "ResourceFld",
-	/* 27 */ "Scope",
-	/* 28 */ "Extra",
-	/* 29 */ "Data",
-	/* 30 */ "Invalid"
-};
-
-char *acpi_ut_get_type_name(acpi_object_type type)
-{
-
-	if (type > ACPI_TYPE_INVALID) {
-		return (ACPI_CAST_PTR(char, acpi_gbl_bad_type));
-	}
-
-	return (ACPI_CAST_PTR(char, acpi_gbl_ns_type_names[type]));
-}
-
-char *acpi_ut_get_object_type_name(union acpi_operand_object *obj_desc)
-{
-
-	if (!obj_desc) {
-		return ("[NULL Object Descriptor]");
-	}
-
-	return (acpi_ut_get_type_name(ACPI_GET_OBJECT_TYPE(obj_desc)));
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_node_name
- *
- * PARAMETERS:  Object               - A namespace node
- *
- * RETURN:      Pointer to a string
- *
- * DESCRIPTION: Validate the node and return the node's ACPI name.
- *
- ******************************************************************************/
-
-char *acpi_ut_get_node_name(void *object)
-{
-	struct acpi_namespace_node *node = (struct acpi_namespace_node *)object;
-
-	/* Must return a string of exactly 4 characters == ACPI_NAME_SIZE */
-
-	if (!object) {
-		return ("NULL");
-	}
-
-	/* Check for Root node */
-
-	if ((object == ACPI_ROOT_OBJECT) || (object == acpi_gbl_root_node)) {
-		return ("\"\\\" ");
-	}
-
-	/* Descriptor must be a namespace node */
-
-	if (ACPI_GET_DESCRIPTOR_TYPE(node) != ACPI_DESC_TYPE_NAMED) {
-		return ("####");
-	}
-
-	/* Name must be a valid ACPI name */
-
-	if (!acpi_ut_valid_acpi_name(node->name.integer)) {
-		node->name.integer = acpi_ut_repair_name(node->name.ascii);
-	}
-
-	/* Return the name */
-
-	return (node->name.ascii);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_descriptor_name
- *
- * PARAMETERS:  Object               - An ACPI object
- *
- * RETURN:      Pointer to a string
- *
- * DESCRIPTION: Validate object and return the descriptor type
- *
- ******************************************************************************/
-
-/* Printable names of object descriptor types */
-
-static const char *acpi_gbl_desc_type_names[] = {
-	/* 00 */ "Invalid",
-	/* 01 */ "Cached",
-	/* 02 */ "State-Generic",
-	/* 03 */ "State-Update",
-	/* 04 */ "State-Package",
-	/* 05 */ "State-Control",
-	/* 06 */ "State-RootParseScope",
-	/* 07 */ "State-ParseScope",
-	/* 08 */ "State-WalkScope",
-	/* 09 */ "State-Result",
-	/* 10 */ "State-Notify",
-	/* 11 */ "State-Thread",
-	/* 12 */ "Walk",
-	/* 13 */ "Parser",
-	/* 14 */ "Operand",
-	/* 15 */ "Node"
-};
-
-char *acpi_ut_get_descriptor_name(void *object)
-{
-
-	if (!object) {
-		return ("NULL OBJECT");
-	}
-
-	if (ACPI_GET_DESCRIPTOR_TYPE(object) > ACPI_DESC_TYPE_MAX) {
-		return (ACPI_CAST_PTR(char, acpi_gbl_bad_type));
-	}
-
-	return (ACPI_CAST_PTR(char,
-			      acpi_gbl_desc_type_names[ACPI_GET_DESCRIPTOR_TYPE
-						       (object)]));
-
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_reference_name
- *
- * PARAMETERS:  Object               - An ACPI reference object
- *
- * RETURN:      Pointer to a string
- *
- * DESCRIPTION: Decode a reference object sub-type to a string.
- *
- ******************************************************************************/
-
-/* Printable names of reference object sub-types */
-
-static const char *acpi_gbl_ref_class_names[] = {
-	/* 00 */ "Local",
-	/* 01 */ "Argument",
-	/* 02 */ "RefOf",
-	/* 03 */ "Index",
-	/* 04 */ "DdbHandle",
-	/* 05 */ "Named Object",
-	/* 06 */ "Debug"
-};
-
-const char *acpi_ut_get_reference_name(union acpi_operand_object *object)
-{
-	if (!object)
-		return "NULL Object";
-
-	if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND)
-		return "Not an Operand object";
-
-	if (object->common.type != ACPI_TYPE_LOCAL_REFERENCE)
-		return "Not a Reference object";
-
-	if (object->reference.class > ACPI_REFCLASS_MAX)
-		return "Unknown Reference class";
-
-	return acpi_gbl_ref_class_names[object->reference.class];
-}
-
-#if defined(ACPI_DEBUG_OUTPUT) || defined(ACPI_DEBUGGER)
-/*
- * Strings and procedures used for debug only
- */
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_mutex_name
- *
- * PARAMETERS:  mutex_id        - The predefined ID for this mutex.
- *
- * RETURN:      String containing the name of the mutex. Always returns a valid
- *              pointer.
- *
- * DESCRIPTION: Translate a mutex ID into a name string (Debug only)
- *
- ******************************************************************************/
-
-char *acpi_ut_get_mutex_name(u32 mutex_id)
-{
-
-	if (mutex_id > ACPI_MAX_MUTEX) {
-		return ("Invalid Mutex ID");
-	}
-
-	return (acpi_gbl_mutex_names[mutex_id]);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_notify_name
- *
- * PARAMETERS:  notify_value    - Value from the Notify() request
- *
- * RETURN:      String corresponding to the Notify Value.
- *
- * DESCRIPTION: Translate a Notify Value to a notify namestring.
- *
- ******************************************************************************/
-
-/* Names for Notify() values, used for debug output */
-
-static const char *acpi_gbl_notify_value_names[] = {
-	"Bus Check",
-	"Device Check",
-	"Device Wake",
-	"Eject Request",
-	"Device Check Light",
-	"Frequency Mismatch",
-	"Bus Mode Mismatch",
-	"Power Fault",
-	"Capabilities Check",
-	"Device PLD Check",
-	"Reserved",
-	"System Locality Update"
-};
-
-const char *acpi_ut_get_notify_name(u32 notify_value)
-{
-
-	if (notify_value <= ACPI_NOTIFY_MAX) {
-		return (acpi_gbl_notify_value_names[notify_value]);
-	} else if (notify_value <= ACPI_MAX_SYS_NOTIFY) {
-		return ("Reserved");
-	} else {		/* Greater or equal to 0x80 */
-
-		return ("**Device Specific**");
-	}
-}
-#endif
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_valid_object_type
- *
- * PARAMETERS:  Type            - Object type to be validated
- *
- * RETURN:      TRUE if valid object type, FALSE otherwise
- *
- * DESCRIPTION: Validate an object type
- *
- ******************************************************************************/
-
-u8 acpi_ut_valid_object_type(acpi_object_type type)
-{
-
-	if (type > ACPI_TYPE_LOCAL_MAX) {
-
-		/* Note: Assumes all TYPEs are contiguous (external/local) */
-
-		return (FALSE);
-	}
-
-	return (TRUE);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_init_globals
- *
- * PARAMETERS:  None
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Init library globals.  All globals that require specific
- *              initialization should be initialized here!
- *
- ******************************************************************************/
-
-acpi_status acpi_ut_init_globals(void)
-{
-	acpi_status status;
-	u32 i;
-
-	ACPI_FUNCTION_TRACE(ut_init_globals);
-
-	/* Create all memory caches */
-
-	status = acpi_ut_create_caches();
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Mutex locked flags */
-
-	for (i = 0; i < ACPI_NUM_MUTEX; i++) {
-		acpi_gbl_mutex_info[i].mutex = NULL;
-		acpi_gbl_mutex_info[i].thread_id = ACPI_MUTEX_NOT_ACQUIRED;
-		acpi_gbl_mutex_info[i].use_count = 0;
-	}
-
-	for (i = 0; i < ACPI_NUM_OWNERID_MASKS; i++) {
-		acpi_gbl_owner_id_mask[i] = 0;
-	}
-	acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS - 1] = 0x80000000;	/* Last ID is never valid */
-
-	/* GPE support */
-
-	acpi_gbl_gpe_xrupt_list_head = NULL;
-	acpi_gbl_gpe_fadt_blocks[0] = NULL;
-	acpi_gbl_gpe_fadt_blocks[1] = NULL;
-	acpi_current_gpe_count = 0;
-
-	/* Global handlers */
-
-	acpi_gbl_system_notify.handler = NULL;
-	acpi_gbl_device_notify.handler = NULL;
-	acpi_gbl_exception_handler = NULL;
-	acpi_gbl_init_handler = NULL;
-	acpi_gbl_table_handler = NULL;
-
-	/* Global Lock support */
-
-	acpi_gbl_global_lock_semaphore = NULL;
-	acpi_gbl_global_lock_mutex = NULL;
-	acpi_gbl_global_lock_acquired = FALSE;
-	acpi_gbl_global_lock_handle = 0;
-	acpi_gbl_global_lock_present = FALSE;
-
-	/* Miscellaneous variables */
-
-	acpi_gbl_cm_single_step = FALSE;
-	acpi_gbl_db_terminate_threads = FALSE;
-	acpi_gbl_shutdown = FALSE;
-	acpi_gbl_ns_lookup_count = 0;
-	acpi_gbl_ps_find_count = 0;
-	acpi_gbl_acpi_hardware_present = TRUE;
-	acpi_gbl_last_owner_id_index = 0;
-	acpi_gbl_next_owner_id_offset = 0;
-	acpi_gbl_trace_method_name = 0;
-	acpi_gbl_trace_dbg_level = 0;
-	acpi_gbl_trace_dbg_layer = 0;
-	acpi_gbl_debugger_configuration = DEBUGGER_THREADING;
-	acpi_gbl_db_output_flags = ACPI_DB_CONSOLE_OUTPUT;
-
-	/* Hardware oriented */
-
-	acpi_gbl_events_initialized = FALSE;
-	acpi_gbl_system_awake_and_running = TRUE;
-
-	/* Namespace */
-
-	acpi_gbl_root_node = NULL;
-	acpi_gbl_root_node_struct.name.integer = ACPI_ROOT_NAME;
-	acpi_gbl_root_node_struct.descriptor_type = ACPI_DESC_TYPE_NAMED;
-	acpi_gbl_root_node_struct.type = ACPI_TYPE_DEVICE;
-	acpi_gbl_root_node_struct.child = NULL;
-	acpi_gbl_root_node_struct.peer = NULL;
-	acpi_gbl_root_node_struct.object = NULL;
-	acpi_gbl_root_node_struct.flags = ANOBJ_END_OF_PEER_LIST;
-
-#ifdef ACPI_DEBUG_OUTPUT
-	acpi_gbl_lowest_stack_pointer = ACPI_CAST_PTR(acpi_size, ACPI_SIZE_MAX);
-#endif
-
-#ifdef ACPI_DBG_TRACK_ALLOCATIONS
-	acpi_gbl_display_final_mem_stats = FALSE;
-#endif
-
-	return_ACPI_STATUS(AE_OK);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_gbl_FADT)
-ACPI_EXPORT_SYMBOL(acpi_dbg_level)
-ACPI_EXPORT_SYMBOL(acpi_dbg_layer)
-ACPI_EXPORT_SYMBOL(acpi_current_gpe_count)
diff --git a/drivers/acpi/utilities/utinit.c b/drivers/acpi/utilities/utinit.c
deleted file mode 100644
index 9316ec36a83..00000000000
--- a/drivers/acpi/utilities/utinit.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/******************************************************************************
- *
- * Module Name: utinit - Common ACPI subsystem initialization
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-#include <acpi/acnamesp.h>
-#include <acpi/acevents.h>
-#include <acpi/actables.h>
-
-#define _COMPONENT          ACPI_UTILITIES
-ACPI_MODULE_NAME("utinit")
-
-/* Local prototypes */
-static void acpi_ut_terminate(void);
-
-/******************************************************************************
- *
- * FUNCTION:    acpi_ut_terminate
- *
- * PARAMETERS:  none
- *
- * RETURN:      none
- *
- * DESCRIPTION: Free global memory
- *
- ******************************************************************************/
-
-static void acpi_ut_terminate(void)
-{
-	struct acpi_gpe_block_info *gpe_block;
-	struct acpi_gpe_block_info *next_gpe_block;
-	struct acpi_gpe_xrupt_info *gpe_xrupt_info;
-	struct acpi_gpe_xrupt_info *next_gpe_xrupt_info;
-
-	ACPI_FUNCTION_TRACE(ut_terminate);
-
-	/* Free global GPE blocks and related info structures */
-
-	gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
-	while (gpe_xrupt_info) {
-		gpe_block = gpe_xrupt_info->gpe_block_list_head;
-		while (gpe_block) {
-			next_gpe_block = gpe_block->next;
-			ACPI_FREE(gpe_block->event_info);
-			ACPI_FREE(gpe_block->register_info);
-			ACPI_FREE(gpe_block);
-
-			gpe_block = next_gpe_block;
-		}
-		next_gpe_xrupt_info = gpe_xrupt_info->next;
-		ACPI_FREE(gpe_xrupt_info);
-		gpe_xrupt_info = next_gpe_xrupt_info;
-	}
-
-	return_VOID;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_subsystem_shutdown
- *
- * PARAMETERS:  none
- *
- * RETURN:      none
- *
- * DESCRIPTION: Shutdown the various subsystems.  Don't delete the mutex
- *              objects here -- because the AML debugger may be still running.
- *
- ******************************************************************************/
-
-void acpi_ut_subsystem_shutdown(void)
-{
-
-	ACPI_FUNCTION_TRACE(ut_subsystem_shutdown);
-
-	/* Just exit if subsystem is already shutdown */
-
-	if (acpi_gbl_shutdown) {
-		ACPI_ERROR((AE_INFO, "ACPI Subsystem is already terminated"));
-		return_VOID;
-	}
-
-	/* Subsystem appears active, go ahead and shut it down */
-
-	acpi_gbl_shutdown = TRUE;
-	acpi_gbl_startup_flags = 0;
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Shutting down ACPI Subsystem\n"));
-
-#ifndef ACPI_ASL_COMPILER
-
-	/* Close the acpi_event Handling */
-
-	acpi_ev_terminate();
-#endif
-
-	/* Close the Namespace */
-
-	acpi_ns_terminate();
-
-	/* Delete the ACPI tables */
-
-	acpi_tb_terminate();
-
-	/* Close the globals */
-
-	acpi_ut_terminate();
-
-	/* Purge the local caches */
-
-	(void)acpi_ut_delete_caches();
-	return_VOID;
-}
diff --git a/drivers/acpi/utilities/utmath.c b/drivers/acpi/utilities/utmath.c
deleted file mode 100644
index 616d7b271c9..00000000000
--- a/drivers/acpi/utilities/utmath.c
+++ /dev/null
@@ -1,312 +0,0 @@
-/*******************************************************************************
- *
- * Module Name: utmath - Integer math support routines
- *
- ******************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-
-#define _COMPONENT          ACPI_UTILITIES
-ACPI_MODULE_NAME("utmath")
-
-/*
- * Support for double-precision integer divide.  This code is included here
- * in order to support kernel environments where the double-precision math
- * library is not available.
- */
-#ifndef ACPI_USE_NATIVE_DIVIDE
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_short_divide
- *
- * PARAMETERS:  Dividend            - 64-bit dividend
- *              Divisor             - 32-bit divisor
- *              out_quotient        - Pointer to where the quotient is returned
- *              out_remainder       - Pointer to where the remainder is returned
- *
- * RETURN:      Status (Checks for divide-by-zero)
- *
- * DESCRIPTION: Perform a short (maximum 64 bits divided by 32 bits)
- *              divide and modulo.  The result is a 64-bit quotient and a
- *              32-bit remainder.
- *
- ******************************************************************************/
-acpi_status
-acpi_ut_short_divide(acpi_integer dividend,
-		     u32 divisor,
-		     acpi_integer * out_quotient, u32 * out_remainder)
-{
-	union uint64_overlay dividend_ovl;
-	union uint64_overlay quotient;
-	u32 remainder32;
-
-	ACPI_FUNCTION_TRACE(ut_short_divide);
-
-	/* Always check for a zero divisor */
-
-	if (divisor == 0) {
-		ACPI_ERROR((AE_INFO, "Divide by zero"));
-		return_ACPI_STATUS(AE_AML_DIVIDE_BY_ZERO);
-	}
-
-	dividend_ovl.full = dividend;
-
-	/*
-	 * The quotient is 64 bits, the remainder is always 32 bits,
-	 * and is generated by the second divide.
-	 */
-	ACPI_DIV_64_BY_32(0, dividend_ovl.part.hi, divisor,
-			  quotient.part.hi, remainder32);
-	ACPI_DIV_64_BY_32(remainder32, dividend_ovl.part.lo, divisor,
-			  quotient.part.lo, remainder32);
-
-	/* Return only what was requested */
-
-	if (out_quotient) {
-		*out_quotient = quotient.full;
-	}
-	if (out_remainder) {
-		*out_remainder = remainder32;
-	}
-
-	return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_divide
- *
- * PARAMETERS:  in_dividend         - Dividend
- *              in_divisor          - Divisor
- *              out_quotient        - Pointer to where the quotient is returned
- *              out_remainder       - Pointer to where the remainder is returned
- *
- * RETURN:      Status (Checks for divide-by-zero)
- *
- * DESCRIPTION: Perform a divide and modulo.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_divide(acpi_integer in_dividend,
-	       acpi_integer in_divisor,
-	       acpi_integer * out_quotient, acpi_integer * out_remainder)
-{
-	union uint64_overlay dividend;
-	union uint64_overlay divisor;
-	union uint64_overlay quotient;
-	union uint64_overlay remainder;
-	union uint64_overlay normalized_dividend;
-	union uint64_overlay normalized_divisor;
-	u32 partial1;
-	union uint64_overlay partial2;
-	union uint64_overlay partial3;
-
-	ACPI_FUNCTION_TRACE(ut_divide);
-
-	/* Always check for a zero divisor */
-
-	if (in_divisor == 0) {
-		ACPI_ERROR((AE_INFO, "Divide by zero"));
-		return_ACPI_STATUS(AE_AML_DIVIDE_BY_ZERO);
-	}
-
-	divisor.full = in_divisor;
-	dividend.full = in_dividend;
-	if (divisor.part.hi == 0) {
-		/*
-		 * 1) Simplest case is where the divisor is 32 bits, we can
-		 * just do two divides
-		 */
-		remainder.part.hi = 0;
-
-		/*
-		 * The quotient is 64 bits, the remainder is always 32 bits,
-		 * and is generated by the second divide.
-		 */
-		ACPI_DIV_64_BY_32(0, dividend.part.hi, divisor.part.lo,
-				  quotient.part.hi, partial1);
-		ACPI_DIV_64_BY_32(partial1, dividend.part.lo, divisor.part.lo,
-				  quotient.part.lo, remainder.part.lo);
-	}
-
-	else {
-		/*
-		 * 2) The general case where the divisor is a full 64 bits
-		 * is more difficult
-		 */
-		quotient.part.hi = 0;
-		normalized_dividend = dividend;
-		normalized_divisor = divisor;
-
-		/* Normalize the operands (shift until the divisor is < 32 bits) */
-
-		do {
-			ACPI_SHIFT_RIGHT_64(normalized_divisor.part.hi,
-					    normalized_divisor.part.lo);
-			ACPI_SHIFT_RIGHT_64(normalized_dividend.part.hi,
-					    normalized_dividend.part.lo);
-
-		} while (normalized_divisor.part.hi != 0);
-
-		/* Partial divide */
-
-		ACPI_DIV_64_BY_32(normalized_dividend.part.hi,
-				  normalized_dividend.part.lo,
-				  normalized_divisor.part.lo,
-				  quotient.part.lo, partial1);
-
-		/*
-		 * The quotient is always 32 bits, and simply requires adjustment.
-		 * The 64-bit remainder must be generated.
-		 */
-		partial1 = quotient.part.lo * divisor.part.hi;
-		partial2.full =
-		    (acpi_integer) quotient.part.lo * divisor.part.lo;
-		partial3.full = (acpi_integer) partial2.part.hi + partial1;
-
-		remainder.part.hi = partial3.part.lo;
-		remainder.part.lo = partial2.part.lo;
-
-		if (partial3.part.hi == 0) {
-			if (partial3.part.lo >= dividend.part.hi) {
-				if (partial3.part.lo == dividend.part.hi) {
-					if (partial2.part.lo > dividend.part.lo) {
-						quotient.part.lo--;
-						remainder.full -= divisor.full;
-					}
-				} else {
-					quotient.part.lo--;
-					remainder.full -= divisor.full;
-				}
-			}
-
-			remainder.full = remainder.full - dividend.full;
-			remainder.part.hi = (u32) - ((s32) remainder.part.hi);
-			remainder.part.lo = (u32) - ((s32) remainder.part.lo);
-
-			if (remainder.part.lo) {
-				remainder.part.hi--;
-			}
-		}
-	}
-
-	/* Return only what was requested */
-
-	if (out_quotient) {
-		*out_quotient = quotient.full;
-	}
-	if (out_remainder) {
-		*out_remainder = remainder.full;
-	}
-
-	return_ACPI_STATUS(AE_OK);
-}
-
-#else
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_short_divide, acpi_ut_divide
- *
- * PARAMETERS:  See function headers above
- *
- * DESCRIPTION: Native versions of the ut_divide functions. Use these if either
- *              1) The target is a 64-bit platform and therefore 64-bit
- *                 integer math is supported directly by the machine.
- *              2) The target is a 32-bit or 16-bit platform, and the
- *                 double-precision integer math library is available to
- *                 perform the divide.
- *
- ******************************************************************************/
-acpi_status
-acpi_ut_short_divide(acpi_integer in_dividend,
-		     u32 divisor,
-		     acpi_integer * out_quotient, u32 * out_remainder)
-{
-
-	ACPI_FUNCTION_TRACE(ut_short_divide);
-
-	/* Always check for a zero divisor */
-
-	if (divisor == 0) {
-		ACPI_ERROR((AE_INFO, "Divide by zero"));
-		return_ACPI_STATUS(AE_AML_DIVIDE_BY_ZERO);
-	}
-
-	/* Return only what was requested */
-
-	if (out_quotient) {
-		*out_quotient = in_dividend / divisor;
-	}
-	if (out_remainder) {
-		*out_remainder = (u32) (in_dividend % divisor);
-	}
-
-	return_ACPI_STATUS(AE_OK);
-}
-
-acpi_status
-acpi_ut_divide(acpi_integer in_dividend,
-	       acpi_integer in_divisor,
-	       acpi_integer * out_quotient, acpi_integer * out_remainder)
-{
-	ACPI_FUNCTION_TRACE(ut_divide);
-
-	/* Always check for a zero divisor */
-
-	if (in_divisor == 0) {
-		ACPI_ERROR((AE_INFO, "Divide by zero"));
-		return_ACPI_STATUS(AE_AML_DIVIDE_BY_ZERO);
-	}
-
-	/* Return only what was requested */
-
-	if (out_quotient) {
-		*out_quotient = in_dividend / in_divisor;
-	}
-	if (out_remainder) {
-		*out_remainder = in_dividend % in_divisor;
-	}
-
-	return_ACPI_STATUS(AE_OK);
-}
-
-#endif
diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c
deleted file mode 100644
index 8f8b407142e..00000000000
--- a/drivers/acpi/utilities/utmisc.c
+++ /dev/null
@@ -1,1093 +0,0 @@
-/*******************************************************************************
- *
- * Module Name: utmisc - common utility procedures
- *
- ******************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <linux/module.h>
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-#include <acpi/acnamesp.h>
-
-#define _COMPONENT          ACPI_UTILITIES
-ACPI_MODULE_NAME("utmisc")
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_validate_exception
- *
- * PARAMETERS:  Status       - The acpi_status code to be formatted
- *
- * RETURN:      A string containing the exception text. NULL if exception is
- *              not valid.
- *
- * DESCRIPTION: This function validates and translates an ACPI exception into
- *              an ASCII string.
- *
- ******************************************************************************/
-const char *acpi_ut_validate_exception(acpi_status status)
-{
-	u32 sub_status;
-	const char *exception = NULL;
-
-	ACPI_FUNCTION_ENTRY();
-
-	/*
-	 * Status is composed of two parts, a "type" and an actual code
-	 */
-	sub_status = (status & ~AE_CODE_MASK);
-
-	switch (status & AE_CODE_MASK) {
-	case AE_CODE_ENVIRONMENTAL:
-
-		if (sub_status <= AE_CODE_ENV_MAX) {
-			exception = acpi_gbl_exception_names_env[sub_status];
-		}
-		break;
-
-	case AE_CODE_PROGRAMMER:
-
-		if (sub_status <= AE_CODE_PGM_MAX) {
-			exception = acpi_gbl_exception_names_pgm[sub_status];
-		}
-		break;
-
-	case AE_CODE_ACPI_TABLES:
-
-		if (sub_status <= AE_CODE_TBL_MAX) {
-			exception = acpi_gbl_exception_names_tbl[sub_status];
-		}
-		break;
-
-	case AE_CODE_AML:
-
-		if (sub_status <= AE_CODE_AML_MAX) {
-			exception = acpi_gbl_exception_names_aml[sub_status];
-		}
-		break;
-
-	case AE_CODE_CONTROL:
-
-		if (sub_status <= AE_CODE_CTRL_MAX) {
-			exception = acpi_gbl_exception_names_ctrl[sub_status];
-		}
-		break;
-
-	default:
-		break;
-	}
-
-	return (ACPI_CAST_PTR(const char, exception));
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_is_aml_table
- *
- * PARAMETERS:  Table               - An ACPI table
- *
- * RETURN:      TRUE if table contains executable AML; FALSE otherwise
- *
- * DESCRIPTION: Check ACPI Signature for a table that contains AML code.
- *              Currently, these are DSDT,SSDT,PSDT. All other table types are
- *              data tables that do not contain AML code.
- *
- ******************************************************************************/
-
-u8 acpi_ut_is_aml_table(struct acpi_table_header *table)
-{
-
-	/* These are the only tables that contain executable AML */
-
-	if (ACPI_COMPARE_NAME(table->signature, ACPI_SIG_DSDT) ||
-	    ACPI_COMPARE_NAME(table->signature, ACPI_SIG_PSDT) ||
-	    ACPI_COMPARE_NAME(table->signature, ACPI_SIG_SSDT)) {
-		return (TRUE);
-	}
-
-	return (FALSE);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_allocate_owner_id
- *
- * PARAMETERS:  owner_id        - Where the new owner ID is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Allocate a table or method owner ID. The owner ID is used to
- *              track objects created by the table or method, to be deleted
- *              when the method exits or the table is unloaded.
- *
- ******************************************************************************/
-
-acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id)
-{
-	u32 i;
-	u32 j;
-	u32 k;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ut_allocate_owner_id);
-
-	/* Guard against multiple allocations of ID to the same location */
-
-	if (*owner_id) {
-		ACPI_ERROR((AE_INFO, "Owner ID [%2.2X] already exists",
-			    *owner_id));
-		return_ACPI_STATUS(AE_ALREADY_EXISTS);
-	}
-
-	/* Mutex for the global ID mask */
-
-	status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/*
-	 * Find a free owner ID, cycle through all possible IDs on repeated
-	 * allocations. (ACPI_NUM_OWNERID_MASKS + 1) because first index may have
-	 * to be scanned twice.
-	 */
-	for (i = 0, j = acpi_gbl_last_owner_id_index;
-	     i < (ACPI_NUM_OWNERID_MASKS + 1); i++, j++) {
-		if (j >= ACPI_NUM_OWNERID_MASKS) {
-			j = 0;	/* Wraparound to start of mask array */
-		}
-
-		for (k = acpi_gbl_next_owner_id_offset; k < 32; k++) {
-			if (acpi_gbl_owner_id_mask[j] == ACPI_UINT32_MAX) {
-
-				/* There are no free IDs in this mask */
-
-				break;
-			}
-
-			if (!(acpi_gbl_owner_id_mask[j] & (1 << k))) {
-				/*
-				 * Found a free ID. The actual ID is the bit index plus one,
-				 * making zero an invalid Owner ID. Save this as the last ID
-				 * allocated and update the global ID mask.
-				 */
-				acpi_gbl_owner_id_mask[j] |= (1 << k);
-
-				acpi_gbl_last_owner_id_index = (u8) j;
-				acpi_gbl_next_owner_id_offset = (u8) (k + 1);
-
-				/*
-				 * Construct encoded ID from the index and bit position
-				 *
-				 * Note: Last [j].k (bit 255) is never used and is marked
-				 * permanently allocated (prevents +1 overflow)
-				 */
-				*owner_id =
-				    (acpi_owner_id) ((k + 1) + ACPI_MUL_32(j));
-
-				ACPI_DEBUG_PRINT((ACPI_DB_VALUES,
-						  "Allocated OwnerId: %2.2X\n",
-						  (unsigned int)*owner_id));
-				goto exit;
-			}
-		}
-
-		acpi_gbl_next_owner_id_offset = 0;
-	}
-
-	/*
-	 * All owner_ids have been allocated. This typically should
-	 * not happen since the IDs are reused after deallocation. The IDs are
-	 * allocated upon table load (one per table) and method execution, and
-	 * they are released when a table is unloaded or a method completes
-	 * execution.
-	 *
-	 * If this error happens, there may be very deep nesting of invoked control
-	 * methods, or there may be a bug where the IDs are not released.
-	 */
-	status = AE_OWNER_ID_LIMIT;
-	ACPI_ERROR((AE_INFO,
-		    "Could not allocate new OwnerId (255 max), AE_OWNER_ID_LIMIT"));
-
-      exit:
-	(void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_release_owner_id
- *
- * PARAMETERS:  owner_id_ptr        - Pointer to a previously allocated owner_iD
- *
- * RETURN:      None. No error is returned because we are either exiting a
- *              control method or unloading a table. Either way, we would
- *              ignore any error anyway.
- *
- * DESCRIPTION: Release a table or method owner ID.  Valid IDs are 1 - 255
- *
- ******************************************************************************/
-
-void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr)
-{
-	acpi_owner_id owner_id = *owner_id_ptr;
-	acpi_status status;
-	u32 index;
-	u32 bit;
-
-	ACPI_FUNCTION_TRACE_U32(ut_release_owner_id, owner_id);
-
-	/* Always clear the input owner_id (zero is an invalid ID) */
-
-	*owner_id_ptr = 0;
-
-	/* Zero is not a valid owner_iD */
-
-	if (owner_id == 0) {
-		ACPI_ERROR((AE_INFO, "Invalid OwnerId: %2.2X", owner_id));
-		return_VOID;
-	}
-
-	/* Mutex for the global ID mask */
-
-	status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
-	if (ACPI_FAILURE(status)) {
-		return_VOID;
-	}
-
-	/* Normalize the ID to zero */
-
-	owner_id--;
-
-	/* Decode ID to index/offset pair */
-
-	index = ACPI_DIV_32(owner_id);
-	bit = 1 << ACPI_MOD_32(owner_id);
-
-	/* Free the owner ID only if it is valid */
-
-	if (acpi_gbl_owner_id_mask[index] & bit) {
-		acpi_gbl_owner_id_mask[index] ^= bit;
-	} else {
-		ACPI_ERROR((AE_INFO,
-			    "Release of non-allocated OwnerId: %2.2X",
-			    owner_id + 1));
-	}
-
-	(void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
-	return_VOID;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_strupr (strupr)
- *
- * PARAMETERS:  src_string      - The source string to convert
- *
- * RETURN:      None
- *
- * DESCRIPTION: Convert string to uppercase
- *
- * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
- *
- ******************************************************************************/
-
-void acpi_ut_strupr(char *src_string)
-{
-	char *string;
-
-	ACPI_FUNCTION_ENTRY();
-
-	if (!src_string) {
-		return;
-	}
-
-	/* Walk entire string, uppercasing the letters */
-
-	for (string = src_string; *string; string++) {
-		*string = (char)ACPI_TOUPPER(*string);
-	}
-
-	return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_print_string
- *
- * PARAMETERS:  String          - Null terminated ASCII string
- *              max_length      - Maximum output length
- *
- * RETURN:      None
- *
- * DESCRIPTION: Dump an ASCII string with support for ACPI-defined escape
- *              sequences.
- *
- ******************************************************************************/
-
-void acpi_ut_print_string(char *string, u8 max_length)
-{
-	u32 i;
-
-	if (!string) {
-		acpi_os_printf("<\"NULL STRING PTR\">");
-		return;
-	}
-
-	acpi_os_printf("\"");
-	for (i = 0; string[i] && (i < max_length); i++) {
-
-		/* Escape sequences */
-
-		switch (string[i]) {
-		case 0x07:
-			acpi_os_printf("\\a");	/* BELL */
-			break;
-
-		case 0x08:
-			acpi_os_printf("\\b");	/* BACKSPACE */
-			break;
-
-		case 0x0C:
-			acpi_os_printf("\\f");	/* FORMFEED */
-			break;
-
-		case 0x0A:
-			acpi_os_printf("\\n");	/* LINEFEED */
-			break;
-
-		case 0x0D:
-			acpi_os_printf("\\r");	/* CARRIAGE RETURN */
-			break;
-
-		case 0x09:
-			acpi_os_printf("\\t");	/* HORIZONTAL TAB */
-			break;
-
-		case 0x0B:
-			acpi_os_printf("\\v");	/* VERTICAL TAB */
-			break;
-
-		case '\'':	/* Single Quote */
-		case '\"':	/* Double Quote */
-		case '\\':	/* Backslash */
-			acpi_os_printf("\\%c", (int)string[i]);
-			break;
-
-		default:
-
-			/* Check for printable character or hex escape */
-
-			if (ACPI_IS_PRINT(string[i])) {
-				/* This is a normal character */
-
-				acpi_os_printf("%c", (int)string[i]);
-			} else {
-				/* All others will be Hex escapes */
-
-				acpi_os_printf("\\x%2.2X", (s32) string[i]);
-			}
-			break;
-		}
-	}
-	acpi_os_printf("\"");
-
-	if (i == max_length && string[i]) {
-		acpi_os_printf("...");
-	}
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_dword_byte_swap
- *
- * PARAMETERS:  Value           - Value to be converted
- *
- * RETURN:      u32 integer with bytes swapped
- *
- * DESCRIPTION: Convert a 32-bit value to big-endian (swap the bytes)
- *
- ******************************************************************************/
-
-u32 acpi_ut_dword_byte_swap(u32 value)
-{
-	union {
-		u32 value;
-		u8 bytes[4];
-	} out;
-	union {
-		u32 value;
-		u8 bytes[4];
-	} in;
-
-	ACPI_FUNCTION_ENTRY();
-
-	in.value = value;
-
-	out.bytes[0] = in.bytes[3];
-	out.bytes[1] = in.bytes[2];
-	out.bytes[2] = in.bytes[1];
-	out.bytes[3] = in.bytes[0];
-
-	return (out.value);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_set_integer_width
- *
- * PARAMETERS:  Revision            From DSDT header
- *
- * RETURN:      None
- *
- * DESCRIPTION: Set the global integer bit width based upon the revision
- *              of the DSDT.  For Revision 1 and 0, Integers are 32 bits.
- *              For Revision 2 and above, Integers are 64 bits.  Yes, this
- *              makes a difference.
- *
- ******************************************************************************/
-
-void acpi_ut_set_integer_width(u8 revision)
-{
-
-	if (revision < 2) {
-
-		/* 32-bit case */
-
-		acpi_gbl_integer_bit_width = 32;
-		acpi_gbl_integer_nybble_width = 8;
-		acpi_gbl_integer_byte_width = 4;
-	} else {
-		/* 64-bit case (ACPI 2.0+) */
-
-		acpi_gbl_integer_bit_width = 64;
-		acpi_gbl_integer_nybble_width = 16;
-		acpi_gbl_integer_byte_width = 8;
-	}
-}
-
-#ifdef ACPI_DEBUG_OUTPUT
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_display_init_pathname
- *
- * PARAMETERS:  Type                - Object type of the node
- *              obj_handle          - Handle whose pathname will be displayed
- *              Path                - Additional path string to be appended.
- *                                      (NULL if no extra path)
- *
- * RETURN:      acpi_status
- *
- * DESCRIPTION: Display full pathname of an object, DEBUG ONLY
- *
- ******************************************************************************/
-
-void
-acpi_ut_display_init_pathname(u8 type,
-			      struct acpi_namespace_node *obj_handle,
-			      char *path)
-{
-	acpi_status status;
-	struct acpi_buffer buffer;
-
-	ACPI_FUNCTION_ENTRY();
-
-	/* Only print the path if the appropriate debug level is enabled */
-
-	if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
-		return;
-	}
-
-	/* Get the full pathname to the node */
-
-	buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
-	status = acpi_ns_handle_to_pathname(obj_handle, &buffer);
-	if (ACPI_FAILURE(status)) {
-		return;
-	}
-
-	/* Print what we're doing */
-
-	switch (type) {
-	case ACPI_TYPE_METHOD:
-		acpi_os_printf("Executing  ");
-		break;
-
-	default:
-		acpi_os_printf("Initializing ");
-		break;
-	}
-
-	/* Print the object type and pathname */
-
-	acpi_os_printf("%-12s %s",
-		       acpi_ut_get_type_name(type), (char *)buffer.pointer);
-
-	/* Extra path is used to append names like _STA, _INI, etc. */
-
-	if (path) {
-		acpi_os_printf(".%s", path);
-	}
-	acpi_os_printf("\n");
-
-	ACPI_FREE(buffer.pointer);
-}
-#endif
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_valid_acpi_char
- *
- * PARAMETERS:  Char            - The character to be examined
- *              Position        - Byte position (0-3)
- *
- * RETURN:      TRUE if the character is valid, FALSE otherwise
- *
- * DESCRIPTION: Check for a valid ACPI character. Must be one of:
- *              1) Upper case alpha
- *              2) numeric
- *              3) underscore
- *
- *              We allow a '!' as the last character because of the ASF! table
- *
- ******************************************************************************/
-
-u8 acpi_ut_valid_acpi_char(char character, u32 position)
-{
-
-	if (!((character >= 'A' && character <= 'Z') ||
-	      (character >= '0' && character <= '9') || (character == '_'))) {
-
-		/* Allow a '!' in the last position */
-
-		if (character == '!' && position == 3) {
-			return (TRUE);
-		}
-
-		return (FALSE);
-	}
-
-	return (TRUE);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_valid_acpi_name
- *
- * PARAMETERS:  Name            - The name to be examined
- *
- * RETURN:      TRUE if the name is valid, FALSE otherwise
- *
- * DESCRIPTION: Check for a valid ACPI name.  Each character must be one of:
- *              1) Upper case alpha
- *              2) numeric
- *              3) underscore
- *
- ******************************************************************************/
-
-u8 acpi_ut_valid_acpi_name(u32 name)
-{
-	u32 i;
-
-	ACPI_FUNCTION_ENTRY();
-
-	for (i = 0; i < ACPI_NAME_SIZE; i++) {
-		if (!acpi_ut_valid_acpi_char
-		    ((ACPI_CAST_PTR(char, &name))[i], i)) {
-			return (FALSE);
-		}
-	}
-
-	return (TRUE);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_repair_name
- *
- * PARAMETERS:  Name            - The ACPI name to be repaired
- *
- * RETURN:      Repaired version of the name
- *
- * DESCRIPTION: Repair an ACPI name: Change invalid characters to '*' and
- *              return the new name.
- *
- ******************************************************************************/
-
-acpi_name acpi_ut_repair_name(char *name)
-{
-       u32 i;
-	char new_name[ACPI_NAME_SIZE];
-
-	for (i = 0; i < ACPI_NAME_SIZE; i++) {
-		new_name[i] = name[i];
-
-		/*
-		 * Replace a bad character with something printable, yet technically
-		 * still invalid. This prevents any collisions with existing "good"
-		 * names in the namespace.
-		 */
-		if (!acpi_ut_valid_acpi_char(name[i], i)) {
-			new_name[i] = '*';
-		}
-	}
-
-	return (*(u32 *) new_name);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_strtoul64
- *
- * PARAMETERS:  String          - Null terminated string
- *              Base            - Radix of the string: 16 or ACPI_ANY_BASE;
- *                                ACPI_ANY_BASE means 'in behalf of to_integer'
- *              ret_integer     - Where the converted integer is returned
- *
- * RETURN:      Status and Converted value
- *
- * DESCRIPTION: Convert a string into an unsigned value. Performs either a
- *              32-bit or 64-bit conversion, depending on the current mode
- *              of the interpreter.
- *              NOTE: Does not support Octal strings, not needed.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_strtoul64(char *string, u32 base, acpi_integer * ret_integer)
-{
-	u32 this_digit = 0;
-	acpi_integer return_value = 0;
-	acpi_integer quotient;
-	acpi_integer dividend;
-	u32 to_integer_op = (base == ACPI_ANY_BASE);
-	u32 mode32 = (acpi_gbl_integer_byte_width == 4);
-	u8 valid_digits = 0;
-	u8 sign_of0x = 0;
-	u8 term = 0;
-
-	ACPI_FUNCTION_TRACE_STR(ut_stroul64, string);
-
-	switch (base) {
-	case ACPI_ANY_BASE:
-	case 16:
-		break;
-
-	default:
-		/* Invalid Base */
-		return_ACPI_STATUS(AE_BAD_PARAMETER);
-	}
-
-	if (!string) {
-		goto error_exit;
-	}
-
-	/* Skip over any white space in the buffer */
-
-	while ((*string) && (ACPI_IS_SPACE(*string) || *string == '\t')) {
-		string++;
-	}
-
-	if (to_integer_op) {
-		/*
-		 * Base equal to ACPI_ANY_BASE means 'to_integer operation case'.
-		 * We need to determine if it is decimal or hexadecimal.
-		 */
-		if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) {
-			sign_of0x = 1;
-			base = 16;
-
-			/* Skip over the leading '0x' */
-			string += 2;
-		} else {
-			base = 10;
-		}
-	}
-
-	/* Any string left? Check that '0x' is not followed by white space. */
-
-	if (!(*string) || ACPI_IS_SPACE(*string) || *string == '\t') {
-		if (to_integer_op) {
-			goto error_exit;
-		} else {
-			goto all_done;
-		}
-	}
-
-	/*
-	 * Perform a 32-bit or 64-bit conversion, depending upon the current
-	 * execution mode of the interpreter
-	 */
-	dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
-
-	/* Main loop: convert the string to a 32- or 64-bit integer */
-
-	while (*string) {
-		if (ACPI_IS_DIGIT(*string)) {
-
-			/* Convert ASCII 0-9 to Decimal value */
-
-			this_digit = ((u8) * string) - '0';
-		} else if (base == 10) {
-
-			/* Digit is out of range; possible in to_integer case only */
-
-			term = 1;
-		} else {
-			this_digit = (u8) ACPI_TOUPPER(*string);
-			if (ACPI_IS_XDIGIT((char)this_digit)) {
-
-				/* Convert ASCII Hex char to value */
-
-				this_digit = this_digit - 'A' + 10;
-			} else {
-				term = 1;
-			}
-		}
-
-		if (term) {
-			if (to_integer_op) {
-				goto error_exit;
-			} else {
-				break;
-			}
-		} else if ((valid_digits == 0) && (this_digit == 0)
-			   && !sign_of0x) {
-
-			/* Skip zeros */
-			string++;
-			continue;
-		}
-
-		valid_digits++;
-
-		if (sign_of0x && ((valid_digits > 16)
-				  || ((valid_digits > 8) && mode32))) {
-			/*
-			 * This is to_integer operation case.
-			 * No any restrictions for string-to-integer conversion,
-			 * see ACPI spec.
-			 */
-			goto error_exit;
-		}
-
-		/* Divide the digit into the correct position */
-
-		(void)
-		    acpi_ut_short_divide((dividend - (acpi_integer) this_digit),
-					 base, &quotient, NULL);
-
-		if (return_value > quotient) {
-			if (to_integer_op) {
-				goto error_exit;
-			} else {
-				break;
-			}
-		}
-
-		return_value *= base;
-		return_value += this_digit;
-		string++;
-	}
-
-	/* All done, normal exit */
-
-      all_done:
-
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
-			  ACPI_FORMAT_UINT64(return_value)));
-
-	*ret_integer = return_value;
-	return_ACPI_STATUS(AE_OK);
-
-      error_exit:
-	/* Base was set/validated above */
-
-	if (base == 10) {
-		return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT);
-	} else {
-		return_ACPI_STATUS(AE_BAD_HEX_CONSTANT);
-	}
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_create_update_state_and_push
- *
- * PARAMETERS:  Object          - Object to be added to the new state
- *              Action          - Increment/Decrement
- *              state_list      - List the state will be added to
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Create a new state and push it
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_create_update_state_and_push(union acpi_operand_object *object,
-				     u16 action,
-				     union acpi_generic_state **state_list)
-{
-	union acpi_generic_state *state;
-
-	ACPI_FUNCTION_ENTRY();
-
-	/* Ignore null objects; these are expected */
-
-	if (!object) {
-		return (AE_OK);
-	}
-
-	state = acpi_ut_create_update_state(object, action);
-	if (!state) {
-		return (AE_NO_MEMORY);
-	}
-
-	acpi_ut_push_generic_state(state_list, state);
-	return (AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_walk_package_tree
- *
- * PARAMETERS:  source_object       - The package to walk
- *              target_object       - Target object (if package is being copied)
- *              walk_callback       - Called once for each package element
- *              Context             - Passed to the callback function
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Walk through a package
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_walk_package_tree(union acpi_operand_object * source_object,
-			  void *target_object,
-			  acpi_pkg_callback walk_callback, void *context)
-{
-	acpi_status status = AE_OK;
-	union acpi_generic_state *state_list = NULL;
-	union acpi_generic_state *state;
-	u32 this_index;
-	union acpi_operand_object *this_source_obj;
-
-	ACPI_FUNCTION_TRACE(ut_walk_package_tree);
-
-	state = acpi_ut_create_pkg_state(source_object, target_object, 0);
-	if (!state) {
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
-
-	while (state) {
-
-		/* Get one element of the package */
-
-		this_index = state->pkg.index;
-		this_source_obj = (union acpi_operand_object *)
-		    state->pkg.source_object->package.elements[this_index];
-
-		/*
-		 * Check for:
-		 * 1) An uninitialized package element.  It is completely
-		 *    legal to declare a package and leave it uninitialized
-		 * 2) Not an internal object - can be a namespace node instead
-		 * 3) Any type other than a package.  Packages are handled in else
-		 *    case below.
-		 */
-		if ((!this_source_obj) ||
-		    (ACPI_GET_DESCRIPTOR_TYPE(this_source_obj) !=
-		     ACPI_DESC_TYPE_OPERAND)
-		    || (ACPI_GET_OBJECT_TYPE(this_source_obj) !=
-			ACPI_TYPE_PACKAGE)) {
-			status =
-			    walk_callback(ACPI_COPY_TYPE_SIMPLE,
-					  this_source_obj, state, context);
-			if (ACPI_FAILURE(status)) {
-				return_ACPI_STATUS(status);
-			}
-
-			state->pkg.index++;
-			while (state->pkg.index >=
-			       state->pkg.source_object->package.count) {
-				/*
-				 * We've handled all of the objects at this level,  This means
-				 * that we have just completed a package.  That package may
-				 * have contained one or more packages itself.
-				 *
-				 * Delete this state and pop the previous state (package).
-				 */
-				acpi_ut_delete_generic_state(state);
-				state = acpi_ut_pop_generic_state(&state_list);
-
-				/* Finished when there are no more states */
-
-				if (!state) {
-					/*
-					 * We have handled all of the objects in the top level
-					 * package just add the length of the package objects
-					 * and exit
-					 */
-					return_ACPI_STATUS(AE_OK);
-				}
-
-				/*
-				 * Go back up a level and move the index past the just
-				 * completed package object.
-				 */
-				state->pkg.index++;
-			}
-		} else {
-			/* This is a subobject of type package */
-
-			status =
-			    walk_callback(ACPI_COPY_TYPE_PACKAGE,
-					  this_source_obj, state, context);
-			if (ACPI_FAILURE(status)) {
-				return_ACPI_STATUS(status);
-			}
-
-			/*
-			 * Push the current state and create a new one
-			 * The callback above returned a new target package object.
-			 */
-			acpi_ut_push_generic_state(&state_list, state);
-			state = acpi_ut_create_pkg_state(this_source_obj,
-							 state->pkg.
-							 this_target_obj, 0);
-			if (!state) {
-
-				/* Free any stacked Update State objects */
-
-				while (state_list) {
-					state =
-					    acpi_ut_pop_generic_state
-					    (&state_list);
-					acpi_ut_delete_generic_state(state);
-				}
-				return_ACPI_STATUS(AE_NO_MEMORY);
-			}
-		}
-	}
-
-	/* We should never get here */
-
-	return_ACPI_STATUS(AE_AML_INTERNAL);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_error, acpi_exception, acpi_warning, acpi_info
- *
- * PARAMETERS:  module_name         - Caller's module name (for error output)
- *              line_number         - Caller's line number (for error output)
- *              Format              - Printf format string + additional args
- *
- * RETURN:      None
- *
- * DESCRIPTION: Print message with module/line/version info
- *
- ******************************************************************************/
-
-void ACPI_INTERNAL_VAR_XFACE
-acpi_error(const char *module_name, u32 line_number, const char *format, ...)
-{
-	va_list args;
-
-	acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number);
-
-	va_start(args, format);
-	acpi_os_vprintf(format, args);
-	acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
-	va_end(args);
-}
-
-void ACPI_INTERNAL_VAR_XFACE
-acpi_exception(const char *module_name,
-	       u32 line_number, acpi_status status, const char *format, ...)
-{
-	va_list args;
-
-	acpi_os_printf("ACPI Exception (%s-%04d): %s, ", module_name,
-		       line_number, acpi_format_exception(status));
-
-	va_start(args, format);
-	acpi_os_vprintf(format, args);
-	acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
-	va_end(args);
-}
-
-void ACPI_INTERNAL_VAR_XFACE
-acpi_warning(const char *module_name, u32 line_number, const char *format, ...)
-{
-	va_list args;
-
-	acpi_os_printf("ACPI Warning (%s-%04d): ", module_name, line_number);
-
-	va_start(args, format);
-	acpi_os_vprintf(format, args);
-	acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
-	va_end(args);
-}
-
-void ACPI_INTERNAL_VAR_XFACE
-acpi_info(const char *module_name, u32 line_number, const char *format, ...)
-{
-	va_list args;
-
-	/*
-	 * Removed module_name, line_number, and acpica version, not needed
-	 * for info output
-	 */
-	acpi_os_printf("ACPI: ");
-
-	va_start(args, format);
-	acpi_os_vprintf(format, args);
-	acpi_os_printf("\n");
-	va_end(args);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_error)
-ACPI_EXPORT_SYMBOL(acpi_exception)
-ACPI_EXPORT_SYMBOL(acpi_warning)
-ACPI_EXPORT_SYMBOL(acpi_info)
diff --git a/drivers/acpi/utilities/utmutex.c b/drivers/acpi/utilities/utmutex.c
deleted file mode 100644
index 7b48ba3f3f8..00000000000
--- a/drivers/acpi/utilities/utmutex.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*******************************************************************************
- *
- * Module Name: utmutex - local mutex support
- *
- ******************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-
-#define _COMPONENT          ACPI_UTILITIES
-ACPI_MODULE_NAME("utmutex")
-
-/* Local prototypes */
-static acpi_status acpi_ut_create_mutex(acpi_mutex_handle mutex_id);
-
-static acpi_status acpi_ut_delete_mutex(acpi_mutex_handle mutex_id);
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_mutex_initialize
- *
- * PARAMETERS:  None.
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Create the system mutex objects.
- *
- ******************************************************************************/
-
-acpi_status acpi_ut_mutex_initialize(void)
-{
-	u32 i;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ut_mutex_initialize);
-
-	/*
-	 * Create each of the predefined mutex objects
-	 */
-	for (i = 0; i < ACPI_NUM_MUTEX; i++) {
-		status = acpi_ut_create_mutex(i);
-		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
-		}
-	}
-
-	/* Create the spinlocks for use at interrupt level */
-
-	spin_lock_init(acpi_gbl_gpe_lock);
-	spin_lock_init(acpi_gbl_hardware_lock);
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_mutex_terminate
- *
- * PARAMETERS:  None.
- *
- * RETURN:      None.
- *
- * DESCRIPTION: Delete all of the system mutex objects.
- *
- ******************************************************************************/
-
-void acpi_ut_mutex_terminate(void)
-{
-	u32 i;
-
-	ACPI_FUNCTION_TRACE(ut_mutex_terminate);
-
-	/*
-	 * Delete each predefined mutex object
-	 */
-	for (i = 0; i < ACPI_NUM_MUTEX; i++) {
-		(void)acpi_ut_delete_mutex(i);
-	}
-
-	/* Delete the spinlocks */
-
-	acpi_os_delete_lock(acpi_gbl_gpe_lock);
-	acpi_os_delete_lock(acpi_gbl_hardware_lock);
-	return_VOID;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_create_mutex
- *
- * PARAMETERS:  mutex_iD        - ID of the mutex to be created
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Create a mutex object.
- *
- ******************************************************************************/
-
-static acpi_status acpi_ut_create_mutex(acpi_mutex_handle mutex_id)
-{
-	acpi_status status = AE_OK;
-
-	ACPI_FUNCTION_TRACE_U32(ut_create_mutex, mutex_id);
-
-	if (mutex_id > ACPI_MAX_MUTEX) {
-		return_ACPI_STATUS(AE_BAD_PARAMETER);
-	}
-
-	if (!acpi_gbl_mutex_info[mutex_id].mutex) {
-		status =
-		    acpi_os_create_mutex(&acpi_gbl_mutex_info[mutex_id].mutex);
-		acpi_gbl_mutex_info[mutex_id].thread_id =
-		    ACPI_MUTEX_NOT_ACQUIRED;
-		acpi_gbl_mutex_info[mutex_id].use_count = 0;
-	}
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_delete_mutex
- *
- * PARAMETERS:  mutex_iD        - ID of the mutex to be deleted
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Delete a mutex object.
- *
- ******************************************************************************/
-
-static acpi_status acpi_ut_delete_mutex(acpi_mutex_handle mutex_id)
-{
-
-	ACPI_FUNCTION_TRACE_U32(ut_delete_mutex, mutex_id);
-
-	if (mutex_id > ACPI_MAX_MUTEX) {
-		return_ACPI_STATUS(AE_BAD_PARAMETER);
-	}
-
-	acpi_os_delete_mutex(acpi_gbl_mutex_info[mutex_id].mutex);
-
-	acpi_gbl_mutex_info[mutex_id].mutex = NULL;
-	acpi_gbl_mutex_info[mutex_id].thread_id = ACPI_MUTEX_NOT_ACQUIRED;
-
-	return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_acquire_mutex
- *
- * PARAMETERS:  mutex_iD        - ID of the mutex to be acquired
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Acquire a mutex object.
- *
- ******************************************************************************/
-
-acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id)
-{
-	acpi_status status;
-	acpi_thread_id this_thread_id;
-
-	ACPI_FUNCTION_NAME(ut_acquire_mutex);
-
-	if (mutex_id > ACPI_MAX_MUTEX) {
-		return (AE_BAD_PARAMETER);
-	}
-
-	this_thread_id = acpi_os_get_thread_id();
-
-#ifdef ACPI_MUTEX_DEBUG
-	{
-		u32 i;
-		/*
-		 * Mutex debug code, for internal debugging only.
-		 *
-		 * Deadlock prevention.  Check if this thread owns any mutexes of value
-		 * greater than or equal to this one.  If so, the thread has violated
-		 * the mutex ordering rule.  This indicates a coding error somewhere in
-		 * the ACPI subsystem code.
-		 */
-		for (i = mutex_id; i < ACPI_NUM_MUTEX; i++) {
-			if (acpi_gbl_mutex_info[i].thread_id == this_thread_id) {
-				if (i == mutex_id) {
-					ACPI_ERROR((AE_INFO,
-						    "Mutex [%s] already acquired by this thread [%X]",
-						    acpi_ut_get_mutex_name
-						    (mutex_id),
-						    this_thread_id));
-
-					return (AE_ALREADY_ACQUIRED);
-				}
-
-				ACPI_ERROR((AE_INFO,
-					    "Invalid acquire order: Thread %X owns [%s], wants [%s]",
-					    this_thread_id,
-					    acpi_ut_get_mutex_name(i),
-					    acpi_ut_get_mutex_name(mutex_id)));
-
-				return (AE_ACQUIRE_DEADLOCK);
-			}
-		}
-	}
-#endif
-
-	ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
-			  "Thread %lX attempting to acquire Mutex [%s]\n",
-			  (unsigned long)this_thread_id,
-			  acpi_ut_get_mutex_name(mutex_id)));
-
-	status = acpi_os_acquire_mutex(acpi_gbl_mutex_info[mutex_id].mutex,
-				       ACPI_WAIT_FOREVER);
-	if (ACPI_SUCCESS(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
-				  "Thread %lX acquired Mutex [%s]\n",
-				  (unsigned long)this_thread_id,
-				  acpi_ut_get_mutex_name(mutex_id)));
-
-		acpi_gbl_mutex_info[mutex_id].use_count++;
-		acpi_gbl_mutex_info[mutex_id].thread_id = this_thread_id;
-	} else {
-		ACPI_EXCEPTION((AE_INFO, status,
-				"Thread %lX could not acquire Mutex [%X]",
-				(unsigned long)this_thread_id, mutex_id));
-	}
-
-	return (status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_release_mutex
- *
- * PARAMETERS:  mutex_iD        - ID of the mutex to be released
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Release a mutex object.
- *
- ******************************************************************************/
-
-acpi_status acpi_ut_release_mutex(acpi_mutex_handle mutex_id)
-{
-	acpi_thread_id this_thread_id;
-
-	ACPI_FUNCTION_NAME(ut_release_mutex);
-
-	this_thread_id = acpi_os_get_thread_id();
-	ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
-			  "Thread %lX releasing Mutex [%s]\n",
-			  (unsigned long)this_thread_id,
-			  acpi_ut_get_mutex_name(mutex_id)));
-
-	if (mutex_id > ACPI_MAX_MUTEX) {
-		return (AE_BAD_PARAMETER);
-	}
-
-	/*
-	 * Mutex must be acquired in order to release it!
-	 */
-	if (acpi_gbl_mutex_info[mutex_id].thread_id == ACPI_MUTEX_NOT_ACQUIRED) {
-		ACPI_ERROR((AE_INFO,
-			    "Mutex [%X] is not acquired, cannot release",
-			    mutex_id));
-
-		return (AE_NOT_ACQUIRED);
-	}
-#ifdef ACPI_MUTEX_DEBUG
-	{
-		u32 i;
-		/*
-		 * Mutex debug code, for internal debugging only.
-		 *
-		 * Deadlock prevention.  Check if this thread owns any mutexes of value
-		 * greater than this one.  If so, the thread has violated the mutex
-		 * ordering rule.  This indicates a coding error somewhere in
-		 * the ACPI subsystem code.
-		 */
-		for (i = mutex_id; i < ACPI_NUM_MUTEX; i++) {
-			if (acpi_gbl_mutex_info[i].thread_id == this_thread_id) {
-				if (i == mutex_id) {
-					continue;
-				}
-
-				ACPI_ERROR((AE_INFO,
-					    "Invalid release order: owns [%s], releasing [%s]",
-					    acpi_ut_get_mutex_name(i),
-					    acpi_ut_get_mutex_name(mutex_id)));
-
-				return (AE_RELEASE_DEADLOCK);
-			}
-		}
-	}
-#endif
-
-	/* Mark unlocked FIRST */
-
-	acpi_gbl_mutex_info[mutex_id].thread_id = ACPI_MUTEX_NOT_ACQUIRED;
-
-	acpi_os_release_mutex(acpi_gbl_mutex_info[mutex_id].mutex);
-	return (AE_OK);
-}
diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c
deleted file mode 100644
index 964b23c1161..00000000000
--- a/drivers/acpi/utilities/utobject.c
+++ /dev/null
@@ -1,677 +0,0 @@
-/******************************************************************************
- *
- * Module Name: utobject - ACPI object create/delete/size/cache routines
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-#include <acpi/acnamesp.h>
-
-#define _COMPONENT          ACPI_UTILITIES
-ACPI_MODULE_NAME("utobject")
-
-/* Local prototypes */
-static acpi_status
-acpi_ut_get_simple_object_size(union acpi_operand_object *obj,
-			       acpi_size * obj_length);
-
-static acpi_status
-acpi_ut_get_package_object_size(union acpi_operand_object *obj,
-				acpi_size * obj_length);
-
-static acpi_status
-acpi_ut_get_element_length(u8 object_type,
-			   union acpi_operand_object *source_object,
-			   union acpi_generic_state *state, void *context);
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_create_internal_object_dbg
- *
- * PARAMETERS:  module_name         - Source file name of caller
- *              line_number         - Line number of caller
- *              component_id        - Component type of caller
- *              Type                - ACPI Type of the new object
- *
- * RETURN:      A new internal object, null on failure
- *
- * DESCRIPTION: Create and initialize a new internal object.
- *
- * NOTE:        We always allocate the worst-case object descriptor because
- *              these objects are cached, and we want them to be
- *              one-size-satisifies-any-request.  This in itself may not be
- *              the most memory efficient, but the efficiency of the object
- *              cache should more than make up for this!
- *
- ******************************************************************************/
-
-union acpi_operand_object *acpi_ut_create_internal_object_dbg(const char
-							      *module_name,
-							      u32 line_number,
-							      u32 component_id,
-							      acpi_object_type
-							      type)
-{
-	union acpi_operand_object *object;
-	union acpi_operand_object *second_object;
-
-	ACPI_FUNCTION_TRACE_STR(ut_create_internal_object_dbg,
-				acpi_ut_get_type_name(type));
-
-	/* Allocate the raw object descriptor */
-
-	object =
-	    acpi_ut_allocate_object_desc_dbg(module_name, line_number,
-					     component_id);
-	if (!object) {
-		return_PTR(NULL);
-	}
-
-	switch (type) {
-	case ACPI_TYPE_REGION:
-	case ACPI_TYPE_BUFFER_FIELD:
-	case ACPI_TYPE_LOCAL_BANK_FIELD:
-
-		/* These types require a secondary object */
-
-		second_object = acpi_ut_allocate_object_desc_dbg(module_name,
-								 line_number,
-								 component_id);
-		if (!second_object) {
-			acpi_ut_delete_object_desc(object);
-			return_PTR(NULL);
-		}
-
-		second_object->common.type = ACPI_TYPE_LOCAL_EXTRA;
-		second_object->common.reference_count = 1;
-
-		/* Link the second object to the first */
-
-		object->common.next_object = second_object;
-		break;
-
-	default:
-		/* All others have no secondary object */
-		break;
-	}
-
-	/* Save the object type in the object descriptor */
-
-	object->common.type = (u8) type;
-
-	/* Init the reference count */
-
-	object->common.reference_count = 1;
-
-	/* Any per-type initialization should go here */
-
-	return_PTR(object);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_create_package_object
- *
- * PARAMETERS:  Count               - Number of package elements
- *
- * RETURN:      Pointer to a new Package object, null on failure
- *
- * DESCRIPTION: Create a fully initialized package object
- *
- ******************************************************************************/
-
-union acpi_operand_object *acpi_ut_create_package_object(u32 count)
-{
-	union acpi_operand_object *package_desc;
-	union acpi_operand_object **package_elements;
-
-	ACPI_FUNCTION_TRACE_U32(ut_create_package_object, count);
-
-	/* Create a new Package object */
-
-	package_desc = acpi_ut_create_internal_object(ACPI_TYPE_PACKAGE);
-	if (!package_desc) {
-		return_PTR(NULL);
-	}
-
-	/*
-	 * Create the element array. Count+1 allows the array to be null
-	 * terminated.
-	 */
-	package_elements = ACPI_ALLOCATE_ZEROED(((acpi_size) count +
-						 1) * sizeof(void *));
-	if (!package_elements) {
-		acpi_ut_remove_reference(package_desc);
-		return_PTR(NULL);
-	}
-
-	package_desc->package.count = count;
-	package_desc->package.elements = package_elements;
-	return_PTR(package_desc);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_create_buffer_object
- *
- * PARAMETERS:  buffer_size            - Size of buffer to be created
- *
- * RETURN:      Pointer to a new Buffer object, null on failure
- *
- * DESCRIPTION: Create a fully initialized buffer object
- *
- ******************************************************************************/
-
-union acpi_operand_object *acpi_ut_create_buffer_object(acpi_size buffer_size)
-{
-	union acpi_operand_object *buffer_desc;
-	u8 *buffer = NULL;
-
-	ACPI_FUNCTION_TRACE_U32(ut_create_buffer_object, buffer_size);
-
-	/* Create a new Buffer object */
-
-	buffer_desc = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER);
-	if (!buffer_desc) {
-		return_PTR(NULL);
-	}
-
-	/* Create an actual buffer only if size > 0 */
-
-	if (buffer_size > 0) {
-
-		/* Allocate the actual buffer */
-
-		buffer = ACPI_ALLOCATE_ZEROED(buffer_size);
-		if (!buffer) {
-			ACPI_ERROR((AE_INFO, "Could not allocate size %X",
-				    (u32) buffer_size));
-			acpi_ut_remove_reference(buffer_desc);
-			return_PTR(NULL);
-		}
-	}
-
-	/* Complete buffer object initialization */
-
-	buffer_desc->buffer.flags |= AOPOBJ_DATA_VALID;
-	buffer_desc->buffer.pointer = buffer;
-	buffer_desc->buffer.length = (u32) buffer_size;
-
-	/* Return the new buffer descriptor */
-
-	return_PTR(buffer_desc);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_create_string_object
- *
- * PARAMETERS:  string_size         - Size of string to be created. Does not
- *                                    include NULL terminator, this is added
- *                                    automatically.
- *
- * RETURN:      Pointer to a new String object
- *
- * DESCRIPTION: Create a fully initialized string object
- *
- ******************************************************************************/
-
-union acpi_operand_object *acpi_ut_create_string_object(acpi_size string_size)
-{
-	union acpi_operand_object *string_desc;
-	char *string;
-
-	ACPI_FUNCTION_TRACE_U32(ut_create_string_object, string_size);
-
-	/* Create a new String object */
-
-	string_desc = acpi_ut_create_internal_object(ACPI_TYPE_STRING);
-	if (!string_desc) {
-		return_PTR(NULL);
-	}
-
-	/*
-	 * Allocate the actual string buffer -- (Size + 1) for NULL terminator.
-	 * NOTE: Zero-length strings are NULL terminated
-	 */
-	string = ACPI_ALLOCATE_ZEROED(string_size + 1);
-	if (!string) {
-		ACPI_ERROR((AE_INFO, "Could not allocate size %X",
-			    (u32) string_size));
-		acpi_ut_remove_reference(string_desc);
-		return_PTR(NULL);
-	}
-
-	/* Complete string object initialization */
-
-	string_desc->string.pointer = string;
-	string_desc->string.length = (u32) string_size;
-
-	/* Return the new string descriptor */
-
-	return_PTR(string_desc);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_valid_internal_object
- *
- * PARAMETERS:  Object              - Object to be validated
- *
- * RETURN:      TRUE if object is valid, FALSE otherwise
- *
- * DESCRIPTION: Validate a pointer to be an union acpi_operand_object
- *
- ******************************************************************************/
-
-u8 acpi_ut_valid_internal_object(void *object)
-{
-
-	ACPI_FUNCTION_NAME(ut_valid_internal_object);
-
-	/* Check for a null pointer */
-
-	if (!object) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "**** Null Object Ptr\n"));
-		return (FALSE);
-	}
-
-	/* Check the descriptor type field */
-
-	switch (ACPI_GET_DESCRIPTOR_TYPE(object)) {
-	case ACPI_DESC_TYPE_OPERAND:
-
-		/* The object appears to be a valid union acpi_operand_object    */
-
-		return (TRUE);
-
-	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "%p is not not an ACPI operand obj [%s]\n",
-				  object, acpi_ut_get_descriptor_name(object)));
-		break;
-	}
-
-	return (FALSE);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_allocate_object_desc_dbg
- *
- * PARAMETERS:  module_name         - Caller's module name (for error output)
- *              line_number         - Caller's line number (for error output)
- *              component_id        - Caller's component ID (for error output)
- *
- * RETURN:      Pointer to newly allocated object descriptor.  Null on error
- *
- * DESCRIPTION: Allocate a new object descriptor.  Gracefully handle
- *              error conditions.
- *
- ******************************************************************************/
-
-void *acpi_ut_allocate_object_desc_dbg(const char *module_name,
-				       u32 line_number, u32 component_id)
-{
-	union acpi_operand_object *object;
-
-	ACPI_FUNCTION_TRACE(ut_allocate_object_desc_dbg);
-
-	object = acpi_os_acquire_object(acpi_gbl_operand_cache);
-	if (!object) {
-		ACPI_ERROR((module_name, line_number,
-			    "Could not allocate an object descriptor"));
-
-		return_PTR(NULL);
-	}
-
-	/* Mark the descriptor type */
-
-	memset(object, 0, sizeof(union acpi_operand_object));
-	ACPI_SET_DESCRIPTOR_TYPE(object, ACPI_DESC_TYPE_OPERAND);
-
-	ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "%p Size %X\n",
-			  object, (u32) sizeof(union acpi_operand_object)));
-
-	return_PTR(object);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_delete_object_desc
- *
- * PARAMETERS:  Object          - An Acpi internal object to be deleted
- *
- * RETURN:      None.
- *
- * DESCRIPTION: Free an ACPI object descriptor or add it to the object cache
- *
- ******************************************************************************/
-
-void acpi_ut_delete_object_desc(union acpi_operand_object *object)
-{
-	ACPI_FUNCTION_TRACE_PTR(ut_delete_object_desc, object);
-
-	/* Object must be an union acpi_operand_object    */
-
-	if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND) {
-		ACPI_ERROR((AE_INFO,
-			    "%p is not an ACPI Operand object [%s]", object,
-			    acpi_ut_get_descriptor_name(object)));
-		return_VOID;
-	}
-
-	(void)acpi_os_release_object(acpi_gbl_operand_cache, object);
-	return_VOID;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_simple_object_size
- *
- * PARAMETERS:  internal_object    - An ACPI operand object
- *              obj_length         - Where the length is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: This function is called to determine the space required to
- *              contain a simple object for return to an external user.
- *
- *              The length includes the object structure plus any additional
- *              needed space.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object,
-			       acpi_size * obj_length)
-{
-	acpi_size length;
-	acpi_size size;
-	acpi_status status = AE_OK;
-
-	ACPI_FUNCTION_TRACE_PTR(ut_get_simple_object_size, internal_object);
-
-	/*
-	 * Handle a null object (Could be a uninitialized package
-	 * element -- which is legal)
-	 */
-	if (!internal_object) {
-		*obj_length = sizeof(union acpi_object);
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Start with the length of the Acpi object */
-
-	length = sizeof(union acpi_object);
-
-	if (ACPI_GET_DESCRIPTOR_TYPE(internal_object) == ACPI_DESC_TYPE_NAMED) {
-
-		/* Object is a named object (reference), just return the length */
-
-		*obj_length = ACPI_ROUND_UP_TO_NATIVE_WORD(length);
-		return_ACPI_STATUS(status);
-	}
-
-	/*
-	 * The final length depends on the object type
-	 * Strings and Buffers are packed right up against the parent object and
-	 * must be accessed bytewise or there may be alignment problems on
-	 * certain processors
-	 */
-	switch (ACPI_GET_OBJECT_TYPE(internal_object)) {
-	case ACPI_TYPE_STRING:
-
-		length += (acpi_size) internal_object->string.length + 1;
-		break;
-
-	case ACPI_TYPE_BUFFER:
-
-		length += (acpi_size) internal_object->buffer.length;
-		break;
-
-	case ACPI_TYPE_INTEGER:
-	case ACPI_TYPE_PROCESSOR:
-	case ACPI_TYPE_POWER:
-
-		/* No extra data for these types */
-
-		break;
-
-	case ACPI_TYPE_LOCAL_REFERENCE:
-
-		switch (internal_object->reference.class) {
-		case ACPI_REFCLASS_NAME:
-
-			/*
-			 * Get the actual length of the full pathname to this object.
-			 * The reference will be converted to the pathname to the object
-			 */
-			size =
-			    acpi_ns_get_pathname_length(internal_object->
-							reference.node);
-			if (!size) {
-				return_ACPI_STATUS(AE_BAD_PARAMETER);
-			}
-
-			length += ACPI_ROUND_UP_TO_NATIVE_WORD(size);
-			break;
-
-		default:
-
-			/*
-			 * No other reference opcodes are supported.
-			 * Notably, Locals and Args are not supported, but this may be
-			 * required eventually.
-			 */
-			ACPI_ERROR((AE_INFO,
-				    "Cannot convert to external object - "
-				    "unsupported Reference Class [%s] %X in object %p",
-				    acpi_ut_get_reference_name(internal_object),
-				    internal_object->reference.class,
-				    internal_object));
-			status = AE_TYPE;
-			break;
-		}
-		break;
-
-	default:
-
-		ACPI_ERROR((AE_INFO, "Cannot convert to external object - "
-			    "unsupported type [%s] %X in object %p",
-			    acpi_ut_get_object_type_name(internal_object),
-			    ACPI_GET_OBJECT_TYPE(internal_object),
-			    internal_object));
-		status = AE_TYPE;
-		break;
-	}
-
-	/*
-	 * Account for the space required by the object rounded up to the next
-	 * multiple of the machine word size.  This keeps each object aligned
-	 * on a machine word boundary. (preventing alignment faults on some
-	 * machines.)
-	 */
-	*obj_length = ACPI_ROUND_UP_TO_NATIVE_WORD(length);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_element_length
- *
- * PARAMETERS:  acpi_pkg_callback
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Get the length of one package element.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ut_get_element_length(u8 object_type,
-			   union acpi_operand_object *source_object,
-			   union acpi_generic_state *state, void *context)
-{
-	acpi_status status = AE_OK;
-	struct acpi_pkg_info *info = (struct acpi_pkg_info *)context;
-	acpi_size object_space;
-
-	switch (object_type) {
-	case ACPI_COPY_TYPE_SIMPLE:
-
-		/*
-		 * Simple object - just get the size (Null object/entry is handled
-		 * here also) and sum it into the running package length
-		 */
-		status =
-		    acpi_ut_get_simple_object_size(source_object,
-						   &object_space);
-		if (ACPI_FAILURE(status)) {
-			return (status);
-		}
-
-		info->length += object_space;
-		break;
-
-	case ACPI_COPY_TYPE_PACKAGE:
-
-		/* Package object - nothing much to do here, let the walk handle it */
-
-		info->num_packages++;
-		state->pkg.this_target_obj = NULL;
-		break;
-
-	default:
-
-		/* No other types allowed */
-
-		return (AE_BAD_PARAMETER);
-	}
-
-	return (status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_package_object_size
- *
- * PARAMETERS:  internal_object     - An ACPI internal object
- *              obj_length          - Where the length is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: This function is called to determine the space required to
- *              contain a package object for return to an external user.
- *
- *              This is moderately complex since a package contains other
- *              objects including packages.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ut_get_package_object_size(union acpi_operand_object *internal_object,
-				acpi_size * obj_length)
-{
-	acpi_status status;
-	struct acpi_pkg_info info;
-
-	ACPI_FUNCTION_TRACE_PTR(ut_get_package_object_size, internal_object);
-
-	info.length = 0;
-	info.object_space = 0;
-	info.num_packages = 1;
-
-	status = acpi_ut_walk_package_tree(internal_object, NULL,
-					   acpi_ut_get_element_length, &info);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/*
-	 * We have handled all of the objects in all levels of the package.
-	 * just add the length of the package objects themselves.
-	 * Round up to the next machine word.
-	 */
-	info.length += ACPI_ROUND_UP_TO_NATIVE_WORD(sizeof(union acpi_object)) *
-	    (acpi_size) info.num_packages;
-
-	/* Return the total package length */
-
-	*obj_length = info.length;
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_object_size
- *
- * PARAMETERS:  internal_object     - An ACPI internal object
- *              obj_length          - Where the length will be returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: This function is called to determine the space required to
- *              contain an object for return to an API user.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_get_object_size(union acpi_operand_object *internal_object,
-			acpi_size * obj_length)
-{
-	acpi_status status;
-
-	ACPI_FUNCTION_ENTRY();
-
-	if ((ACPI_GET_DESCRIPTOR_TYPE(internal_object) ==
-	     ACPI_DESC_TYPE_OPERAND)
-	    && (ACPI_GET_OBJECT_TYPE(internal_object) == ACPI_TYPE_PACKAGE)) {
-		status =
-		    acpi_ut_get_package_object_size(internal_object,
-						    obj_length);
-	} else {
-		status =
-		    acpi_ut_get_simple_object_size(internal_object, obj_length);
-	}
-
-	return (status);
-}
diff --git a/drivers/acpi/utilities/utresrc.c b/drivers/acpi/utilities/utresrc.c
deleted file mode 100644
index 0755c5cdbe1..00000000000
--- a/drivers/acpi/utilities/utresrc.c
+++ /dev/null
@@ -1,616 +0,0 @@
-/*******************************************************************************
- *
- * Module Name: utresrc - Resource management utilities
- *
- ******************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-#include <acpi/amlresrc.h>
-
-#define _COMPONENT          ACPI_UTILITIES
-ACPI_MODULE_NAME("utresrc")
-#if defined(ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
-/*
- * Strings used to decode resource descriptors.
- * Used by both the disasssembler and the debugger resource dump routines
- */
-const char *acpi_gbl_bm_decode[] = {
-	"NotBusMaster",
-	"BusMaster"
-};
-
-const char *acpi_gbl_config_decode[] = {
-	"0 - Good Configuration",
-	"1 - Acceptable Configuration",
-	"2 - Suboptimal Configuration",
-	"3 - ***Invalid Configuration***",
-};
-
-const char *acpi_gbl_consume_decode[] = {
-	"ResourceProducer",
-	"ResourceConsumer"
-};
-
-const char *acpi_gbl_dec_decode[] = {
-	"PosDecode",
-	"SubDecode"
-};
-
-const char *acpi_gbl_he_decode[] = {
-	"Level",
-	"Edge"
-};
-
-const char *acpi_gbl_io_decode[] = {
-	"Decode10",
-	"Decode16"
-};
-
-const char *acpi_gbl_ll_decode[] = {
-	"ActiveHigh",
-	"ActiveLow"
-};
-
-const char *acpi_gbl_max_decode[] = {
-	"MaxNotFixed",
-	"MaxFixed"
-};
-
-const char *acpi_gbl_mem_decode[] = {
-	"NonCacheable",
-	"Cacheable",
-	"WriteCombining",
-	"Prefetchable"
-};
-
-const char *acpi_gbl_min_decode[] = {
-	"MinNotFixed",
-	"MinFixed"
-};
-
-const char *acpi_gbl_mtp_decode[] = {
-	"AddressRangeMemory",
-	"AddressRangeReserved",
-	"AddressRangeACPI",
-	"AddressRangeNVS"
-};
-
-const char *acpi_gbl_rng_decode[] = {
-	"InvalidRanges",
-	"NonISAOnlyRanges",
-	"ISAOnlyRanges",
-	"EntireRange"
-};
-
-const char *acpi_gbl_rw_decode[] = {
-	"ReadOnly",
-	"ReadWrite"
-};
-
-const char *acpi_gbl_shr_decode[] = {
-	"Exclusive",
-	"Shared"
-};
-
-const char *acpi_gbl_siz_decode[] = {
-	"Transfer8",
-	"Transfer8_16",
-	"Transfer16",
-	"InvalidSize"
-};
-
-const char *acpi_gbl_trs_decode[] = {
-	"DenseTranslation",
-	"SparseTranslation"
-};
-
-const char *acpi_gbl_ttp_decode[] = {
-	"TypeStatic",
-	"TypeTranslation"
-};
-
-const char *acpi_gbl_typ_decode[] = {
-	"Compatibility",
-	"TypeA",
-	"TypeB",
-	"TypeF"
-};
-
-#endif
-
-/*
- * Base sizes of the raw AML resource descriptors, indexed by resource type.
- * Zero indicates a reserved (and therefore invalid) resource type.
- */
-const u8 acpi_gbl_resource_aml_sizes[] = {
-	/* Small descriptors */
-
-	0,
-	0,
-	0,
-	0,
-	ACPI_AML_SIZE_SMALL(struct aml_resource_irq),
-	ACPI_AML_SIZE_SMALL(struct aml_resource_dma),
-	ACPI_AML_SIZE_SMALL(struct aml_resource_start_dependent),
-	ACPI_AML_SIZE_SMALL(struct aml_resource_end_dependent),
-	ACPI_AML_SIZE_SMALL(struct aml_resource_io),
-	ACPI_AML_SIZE_SMALL(struct aml_resource_fixed_io),
-	0,
-	0,
-	0,
-	0,
-	ACPI_AML_SIZE_SMALL(struct aml_resource_vendor_small),
-	ACPI_AML_SIZE_SMALL(struct aml_resource_end_tag),
-
-	/* Large descriptors */
-
-	0,
-	ACPI_AML_SIZE_LARGE(struct aml_resource_memory24),
-	ACPI_AML_SIZE_LARGE(struct aml_resource_generic_register),
-	0,
-	ACPI_AML_SIZE_LARGE(struct aml_resource_vendor_large),
-	ACPI_AML_SIZE_LARGE(struct aml_resource_memory32),
-	ACPI_AML_SIZE_LARGE(struct aml_resource_fixed_memory32),
-	ACPI_AML_SIZE_LARGE(struct aml_resource_address32),
-	ACPI_AML_SIZE_LARGE(struct aml_resource_address16),
-	ACPI_AML_SIZE_LARGE(struct aml_resource_extended_irq),
-	ACPI_AML_SIZE_LARGE(struct aml_resource_address64),
-	ACPI_AML_SIZE_LARGE(struct aml_resource_extended_address64)
-};
-
-/*
- * Resource types, used to validate the resource length field.
- * The length of fixed-length types must match exactly, variable
- * lengths must meet the minimum required length, etc.
- * Zero indicates a reserved (and therefore invalid) resource type.
- */
-static const u8 acpi_gbl_resource_types[] = {
-	/* Small descriptors */
-
-	0,
-	0,
-	0,
-	0,
-	ACPI_SMALL_VARIABLE_LENGTH,
-	ACPI_FIXED_LENGTH,
-	ACPI_SMALL_VARIABLE_LENGTH,
-	ACPI_FIXED_LENGTH,
-	ACPI_FIXED_LENGTH,
-	ACPI_FIXED_LENGTH,
-	0,
-	0,
-	0,
-	0,
-	ACPI_VARIABLE_LENGTH,
-	ACPI_FIXED_LENGTH,
-
-	/* Large descriptors */
-
-	0,
-	ACPI_FIXED_LENGTH,
-	ACPI_FIXED_LENGTH,
-	0,
-	ACPI_VARIABLE_LENGTH,
-	ACPI_FIXED_LENGTH,
-	ACPI_FIXED_LENGTH,
-	ACPI_VARIABLE_LENGTH,
-	ACPI_VARIABLE_LENGTH,
-	ACPI_VARIABLE_LENGTH,
-	ACPI_VARIABLE_LENGTH,
-	ACPI_FIXED_LENGTH
-};
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_walk_aml_resources
- *
- * PARAMETERS:  Aml             - Pointer to the raw AML resource template
- *              aml_length      - Length of the entire template
- *              user_function   - Called once for each descriptor found. If
- *                                NULL, a pointer to the end_tag is returned
- *              Context         - Passed to user_function
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Walk a raw AML resource list(buffer). User function called
- *              once for each resource found.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_walk_aml_resources(u8 * aml,
-			   acpi_size aml_length,
-			   acpi_walk_aml_callback user_function, void **context)
-{
-	acpi_status status;
-	u8 *end_aml;
-	u8 resource_index;
-	u32 length;
-	u32 offset = 0;
-
-	ACPI_FUNCTION_TRACE(ut_walk_aml_resources);
-
-	/* The absolute minimum resource template is one end_tag descriptor */
-
-	if (aml_length < sizeof(struct aml_resource_end_tag)) {
-		return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
-	}
-
-	/* Point to the end of the resource template buffer */
-
-	end_aml = aml + aml_length;
-
-	/* Walk the byte list, abort on any invalid descriptor type or length */
-
-	while (aml < end_aml) {
-
-		/* Validate the Resource Type and Resource Length */
-
-		status = acpi_ut_validate_resource(aml, &resource_index);
-		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
-		}
-
-		/* Get the length of this descriptor */
-
-		length = acpi_ut_get_descriptor_length(aml);
-
-		/* Invoke the user function */
-
-		if (user_function) {
-			status =
-			    user_function(aml, length, offset, resource_index,
-					  context);
-			if (ACPI_FAILURE(status)) {
-				return (status);
-			}
-		}
-
-		/* An end_tag descriptor terminates this resource template */
-
-		if (acpi_ut_get_resource_type(aml) ==
-		    ACPI_RESOURCE_NAME_END_TAG) {
-			/*
-			 * There must be at least one more byte in the buffer for
-			 * the 2nd byte of the end_tag
-			 */
-			if ((aml + 1) >= end_aml) {
-				return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG);
-			}
-
-			/* Return the pointer to the end_tag if requested */
-
-			if (!user_function) {
-				*context = aml;
-			}
-
-			/* Normal exit */
-
-			return_ACPI_STATUS(AE_OK);
-		}
-
-		aml += length;
-		offset += length;
-	}
-
-	/* Did not find an end_tag descriptor */
-
-	return (AE_AML_NO_RESOURCE_END_TAG);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_validate_resource
- *
- * PARAMETERS:  Aml             - Pointer to the raw AML resource descriptor
- *              return_index    - Where the resource index is returned. NULL
- *                                if the index is not required.
- *
- * RETURN:      Status, and optionally the Index into the global resource tables
- *
- * DESCRIPTION: Validate an AML resource descriptor by checking the Resource
- *              Type and Resource Length. Returns an index into the global
- *              resource information/dispatch tables for later use.
- *
- ******************************************************************************/
-
-acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index)
-{
-	u8 resource_type;
-	u8 resource_index;
-	acpi_rs_length resource_length;
-	acpi_rs_length minimum_resource_length;
-
-	ACPI_FUNCTION_ENTRY();
-
-	/*
-	 * 1) Validate the resource_type field (Byte 0)
-	 */
-	resource_type = ACPI_GET8(aml);
-
-	/*
-	 * Byte 0 contains the descriptor name (Resource Type)
-	 * Examine the large/small bit in the resource header
-	 */
-	if (resource_type & ACPI_RESOURCE_NAME_LARGE) {
-
-		/* Verify the large resource type (name) against the max */
-
-		if (resource_type > ACPI_RESOURCE_NAME_LARGE_MAX) {
-			return (AE_AML_INVALID_RESOURCE_TYPE);
-		}
-
-		/*
-		 * Large Resource Type -- bits 6:0 contain the name
-		 * Translate range 0x80-0x8B to index range 0x10-0x1B
-		 */
-		resource_index = (u8) (resource_type - 0x70);
-	} else {
-		/*
-		 * Small Resource Type -- bits 6:3 contain the name
-		 * Shift range to index range 0x00-0x0F
-		 */
-		resource_index = (u8)
-		    ((resource_type & ACPI_RESOURCE_NAME_SMALL_MASK) >> 3);
-	}
-
-	/* Check validity of the resource type, zero indicates name is invalid */
-
-	if (!acpi_gbl_resource_types[resource_index]) {
-		return (AE_AML_INVALID_RESOURCE_TYPE);
-	}
-
-	/*
-	 * 2) Validate the resource_length field. This ensures that the length
-	 *    is at least reasonable, and guarantees that it is non-zero.
-	 */
-	resource_length = acpi_ut_get_resource_length(aml);
-	minimum_resource_length = acpi_gbl_resource_aml_sizes[resource_index];
-
-	/* Validate based upon the type of resource - fixed length or variable */
-
-	switch (acpi_gbl_resource_types[resource_index]) {
-	case ACPI_FIXED_LENGTH:
-
-		/* Fixed length resource, length must match exactly */
-
-		if (resource_length != minimum_resource_length) {
-			return (AE_AML_BAD_RESOURCE_LENGTH);
-		}
-		break;
-
-	case ACPI_VARIABLE_LENGTH:
-
-		/* Variable length resource, length must be at least the minimum */
-
-		if (resource_length < minimum_resource_length) {
-			return (AE_AML_BAD_RESOURCE_LENGTH);
-		}
-		break;
-
-	case ACPI_SMALL_VARIABLE_LENGTH:
-
-		/* Small variable length resource, length can be (Min) or (Min-1) */
-
-		if ((resource_length > minimum_resource_length) ||
-		    (resource_length < (minimum_resource_length - 1))) {
-			return (AE_AML_BAD_RESOURCE_LENGTH);
-		}
-		break;
-
-	default:
-
-		/* Shouldn't happen (because of validation earlier), but be sure */
-
-		return (AE_AML_INVALID_RESOURCE_TYPE);
-	}
-
-	/* Optionally return the resource table index */
-
-	if (return_index) {
-		*return_index = resource_index;
-	}
-
-	return (AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_resource_type
- *
- * PARAMETERS:  Aml             - Pointer to the raw AML resource descriptor
- *
- * RETURN:      The Resource Type with no extraneous bits (except the
- *              Large/Small descriptor bit -- this is left alone)
- *
- * DESCRIPTION: Extract the Resource Type/Name from the first byte of
- *              a resource descriptor.
- *
- ******************************************************************************/
-
-u8 acpi_ut_get_resource_type(void *aml)
-{
-	ACPI_FUNCTION_ENTRY();
-
-	/*
-	 * Byte 0 contains the descriptor name (Resource Type)
-	 * Examine the large/small bit in the resource header
-	 */
-	if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) {
-
-		/* Large Resource Type -- bits 6:0 contain the name */
-
-		return (ACPI_GET8(aml));
-	} else {
-		/* Small Resource Type -- bits 6:3 contain the name */
-
-		return ((u8) (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_SMALL_MASK));
-	}
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_resource_length
- *
- * PARAMETERS:  Aml             - Pointer to the raw AML resource descriptor
- *
- * RETURN:      Byte Length
- *
- * DESCRIPTION: Get the "Resource Length" of a raw AML descriptor. By
- *              definition, this does not include the size of the descriptor
- *              header or the length field itself.
- *
- ******************************************************************************/
-
-u16 acpi_ut_get_resource_length(void *aml)
-{
-	acpi_rs_length resource_length;
-
-	ACPI_FUNCTION_ENTRY();
-
-	/*
-	 * Byte 0 contains the descriptor name (Resource Type)
-	 * Examine the large/small bit in the resource header
-	 */
-	if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) {
-
-		/* Large Resource type -- bytes 1-2 contain the 16-bit length */
-
-		ACPI_MOVE_16_TO_16(&resource_length, ACPI_ADD_PTR(u8, aml, 1));
-
-	} else {
-		/* Small Resource type -- bits 2:0 of byte 0 contain the length */
-
-		resource_length = (u16) (ACPI_GET8(aml) &
-					 ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK);
-	}
-
-	return (resource_length);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_resource_header_length
- *
- * PARAMETERS:  Aml             - Pointer to the raw AML resource descriptor
- *
- * RETURN:      Length of the AML header (depends on large/small descriptor)
- *
- * DESCRIPTION: Get the length of the header for this resource.
- *
- ******************************************************************************/
-
-u8 acpi_ut_get_resource_header_length(void *aml)
-{
-	ACPI_FUNCTION_ENTRY();
-
-	/* Examine the large/small bit in the resource header */
-
-	if (ACPI_GET8(aml) & ACPI_RESOURCE_NAME_LARGE) {
-		return (sizeof(struct aml_resource_large_header));
-	} else {
-		return (sizeof(struct aml_resource_small_header));
-	}
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_descriptor_length
- *
- * PARAMETERS:  Aml             - Pointer to the raw AML resource descriptor
- *
- * RETURN:      Byte length
- *
- * DESCRIPTION: Get the total byte length of a raw AML descriptor, including the
- *              length of the descriptor header and the length field itself.
- *              Used to walk descriptor lists.
- *
- ******************************************************************************/
-
-u32 acpi_ut_get_descriptor_length(void *aml)
-{
-	ACPI_FUNCTION_ENTRY();
-
-	/*
-	 * Get the Resource Length (does not include header length) and add
-	 * the header length (depends on if this is a small or large resource)
-	 */
-	return (acpi_ut_get_resource_length(aml) +
-		acpi_ut_get_resource_header_length(aml));
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_get_resource_end_tag
- *
- * PARAMETERS:  obj_desc        - The resource template buffer object
- *              end_tag         - Where the pointer to the end_tag is returned
- *
- * RETURN:      Status, pointer to the end tag
- *
- * DESCRIPTION: Find the end_tag resource descriptor in an AML resource template
- *              Note: allows a buffer length of zero.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ut_get_resource_end_tag(union acpi_operand_object * obj_desc,
-			     u8 ** end_tag)
-{
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(ut_get_resource_end_tag);
-
-	/* Allow a buffer length of zero */
-
-	if (!obj_desc->buffer.length) {
-		*end_tag = obj_desc->buffer.pointer;
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Validate the template and get a pointer to the end_tag */
-
-	status = acpi_ut_walk_aml_resources(obj_desc->buffer.pointer,
-					    obj_desc->buffer.length, NULL,
-					    (void **)end_tag);
-
-	return_ACPI_STATUS(status);
-}
diff --git a/drivers/acpi/utilities/utstate.c b/drivers/acpi/utilities/utstate.c
deleted file mode 100644
index 54c3461e2f2..00000000000
--- a/drivers/acpi/utilities/utstate.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*******************************************************************************
- *
- * Module Name: utstate - state object support procedures
- *
- ******************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-
-#define _COMPONENT          ACPI_UTILITIES
-ACPI_MODULE_NAME("utstate")
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_create_pkg_state_and_push
- *
- * PARAMETERS:  Object          - Object to be added to the new state
- *              Action          - Increment/Decrement
- *              state_list      - List the state will be added to
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Create a new state and push it
- *
- ******************************************************************************/
-acpi_status
-acpi_ut_create_pkg_state_and_push(void *internal_object,
-				  void *external_object,
-				  u16 index,
-				  union acpi_generic_state **state_list)
-{
-	union acpi_generic_state *state;
-
-	ACPI_FUNCTION_ENTRY();
-
-	state =
-	    acpi_ut_create_pkg_state(internal_object, external_object, index);
-	if (!state) {
-		return (AE_NO_MEMORY);
-	}
-
-	acpi_ut_push_generic_state(state_list, state);
-	return (AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_push_generic_state
- *
- * PARAMETERS:  list_head           - Head of the state stack
- *              State               - State object to push
- *
- * RETURN:      None
- *
- * DESCRIPTION: Push a state object onto a state stack
- *
- ******************************************************************************/
-
-void
-acpi_ut_push_generic_state(union acpi_generic_state **list_head,
-			   union acpi_generic_state *state)
-{
-	ACPI_FUNCTION_TRACE(ut_push_generic_state);
-
-	/* Push the state object onto the front of the list (stack) */
-
-	state->common.next = *list_head;
-	*list_head = state;
-
-	return_VOID;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_pop_generic_state
- *
- * PARAMETERS:  list_head           - Head of the state stack
- *
- * RETURN:      The popped state object
- *
- * DESCRIPTION: Pop a state object from a state stack
- *
- ******************************************************************************/
-
-union acpi_generic_state *acpi_ut_pop_generic_state(union acpi_generic_state
-						    **list_head)
-{
-	union acpi_generic_state *state;
-
-	ACPI_FUNCTION_TRACE(ut_pop_generic_state);
-
-	/* Remove the state object at the head of the list (stack) */
-
-	state = *list_head;
-	if (state) {
-
-		/* Update the list head */
-
-		*list_head = state->common.next;
-	}
-
-	return_PTR(state);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_create_generic_state
- *
- * PARAMETERS:  None
- *
- * RETURN:      The new state object. NULL on failure.
- *
- * DESCRIPTION: Create a generic state object.  Attempt to obtain one from
- *              the global state cache;  If none available, create a new one.
- *
- ******************************************************************************/
-
-union acpi_generic_state *acpi_ut_create_generic_state(void)
-{
-	union acpi_generic_state *state;
-
-	ACPI_FUNCTION_ENTRY();
-
-	state = acpi_os_acquire_object(acpi_gbl_state_cache);
-	if (state) {
-
-		/* Initialize */
-		memset(state, 0, sizeof(union acpi_generic_state));
-		state->common.descriptor_type = ACPI_DESC_TYPE_STATE;
-	}
-
-	return (state);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_create_thread_state
- *
- * PARAMETERS:  None
- *
- * RETURN:      New Thread State. NULL on failure
- *
- * DESCRIPTION: Create a "Thread State" - a flavor of the generic state used
- *              to track per-thread info during method execution
- *
- ******************************************************************************/
-
-struct acpi_thread_state *acpi_ut_create_thread_state(void)
-{
-	union acpi_generic_state *state;
-
-	ACPI_FUNCTION_TRACE(ut_create_thread_state);
-
-	/* Create the generic state object */
-
-	state = acpi_ut_create_generic_state();
-	if (!state) {
-		return_PTR(NULL);
-	}
-
-	/* Init fields specific to the update struct */
-
-	state->common.descriptor_type = ACPI_DESC_TYPE_STATE_THREAD;
-	state->thread.thread_id = acpi_os_get_thread_id();
-
-	/* Check for invalid thread ID - zero is very bad, it will break things */
-
-	if (!state->thread.thread_id) {
-		ACPI_ERROR((AE_INFO, "Invalid zero ID from AcpiOsGetThreadId"));
-		state->thread.thread_id = (acpi_thread_id) 1;
-	}
-
-	return_PTR((struct acpi_thread_state *)state);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_create_update_state
- *
- * PARAMETERS:  Object          - Initial Object to be installed in the state
- *              Action          - Update action to be performed
- *
- * RETURN:      New state object, null on failure
- *
- * DESCRIPTION: Create an "Update State" - a flavor of the generic state used
- *              to update reference counts and delete complex objects such
- *              as packages.
- *
- ******************************************************************************/
-
-union acpi_generic_state *acpi_ut_create_update_state(union acpi_operand_object
-						      *object, u16 action)
-{
-	union acpi_generic_state *state;
-
-	ACPI_FUNCTION_TRACE_PTR(ut_create_update_state, object);
-
-	/* Create the generic state object */
-
-	state = acpi_ut_create_generic_state();
-	if (!state) {
-		return_PTR(NULL);
-	}
-
-	/* Init fields specific to the update struct */
-
-	state->common.descriptor_type = ACPI_DESC_TYPE_STATE_UPDATE;
-	state->update.object = object;
-	state->update.value = action;
-
-	return_PTR(state);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_create_pkg_state
- *
- * PARAMETERS:  Object          - Initial Object to be installed in the state
- *              Action          - Update action to be performed
- *
- * RETURN:      New state object, null on failure
- *
- * DESCRIPTION: Create a "Package State"
- *
- ******************************************************************************/
-
-union acpi_generic_state *acpi_ut_create_pkg_state(void *internal_object,
-						   void *external_object,
-						   u16 index)
-{
-	union acpi_generic_state *state;
-
-	ACPI_FUNCTION_TRACE_PTR(ut_create_pkg_state, internal_object);
-
-	/* Create the generic state object */
-
-	state = acpi_ut_create_generic_state();
-	if (!state) {
-		return_PTR(NULL);
-	}
-
-	/* Init fields specific to the update struct */
-
-	state->common.descriptor_type = ACPI_DESC_TYPE_STATE_PACKAGE;
-	state->pkg.source_object = (union acpi_operand_object *)internal_object;
-	state->pkg.dest_object = external_object;
-	state->pkg.index = index;
-	state->pkg.num_packages = 1;
-
-	return_PTR(state);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_create_control_state
- *
- * PARAMETERS:  None
- *
- * RETURN:      New state object, null on failure
- *
- * DESCRIPTION: Create a "Control State" - a flavor of the generic state used
- *              to support nested IF/WHILE constructs in the AML.
- *
- ******************************************************************************/
-
-union acpi_generic_state *acpi_ut_create_control_state(void)
-{
-	union acpi_generic_state *state;
-
-	ACPI_FUNCTION_TRACE(ut_create_control_state);
-
-	/* Create the generic state object */
-
-	state = acpi_ut_create_generic_state();
-	if (!state) {
-		return_PTR(NULL);
-	}
-
-	/* Init fields specific to the control struct */
-
-	state->common.descriptor_type = ACPI_DESC_TYPE_STATE_CONTROL;
-	state->common.state = ACPI_CONTROL_CONDITIONAL_EXECUTING;
-
-	return_PTR(state);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_delete_generic_state
- *
- * PARAMETERS:  State               - The state object to be deleted
- *
- * RETURN:      None
- *
- * DESCRIPTION: Release a state object to the state cache. NULL state objects
- *              are ignored.
- *
- ******************************************************************************/
-
-void acpi_ut_delete_generic_state(union acpi_generic_state *state)
-{
-	ACPI_FUNCTION_TRACE(ut_delete_generic_state);
-
-	/* Ignore null state */
-
-	if (state) {
-		(void)acpi_os_release_object(acpi_gbl_state_cache, state);
-	}
-	return_VOID;
-}
diff --git a/drivers/acpi/utilities/utxface.c b/drivers/acpi/utilities/utxface.c
deleted file mode 100644
index 5b27724a274..00000000000
--- a/drivers/acpi/utilities/utxface.c
+++ /dev/null
@@ -1,512 +0,0 @@
-/******************************************************************************
- *
- * Module Name: utxface - External interfaces for "global" ACPI functions
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-#include <acpi/acevents.h>
-#include <acpi/acnamesp.h>
-#include <acpi/acdebug.h>
-#include <acpi/actables.h>
-
-#define _COMPONENT          ACPI_UTILITIES
-ACPI_MODULE_NAME("utxface")
-
-#ifndef ACPI_ASL_COMPILER
-/*******************************************************************************
- *
- * FUNCTION:    acpi_initialize_subsystem
- *
- * PARAMETERS:  None
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Initializes all global variables.  This is the first function
- *              called, so any early initialization belongs here.
- *
- ******************************************************************************/
-acpi_status __init acpi_initialize_subsystem(void)
-{
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(acpi_initialize_subsystem);
-
-	acpi_gbl_startup_flags = ACPI_SUBSYSTEM_INITIALIZE;
-	ACPI_DEBUG_EXEC(acpi_ut_init_stack_ptr_trace());
-
-	/* Initialize the OS-Dependent layer */
-
-	status = acpi_os_initialize();
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "During OSL initialization"));
-		return_ACPI_STATUS(status);
-	}
-
-	/* Initialize all globals used by the subsystem */
-
-	status = acpi_ut_init_globals();
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status,
-				"During initialization of globals"));
-		return_ACPI_STATUS(status);
-	}
-
-	/* Create the default mutex objects */
-
-	status = acpi_ut_mutex_initialize();
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status,
-				"During Global Mutex creation"));
-		return_ACPI_STATUS(status);
-	}
-
-	/*
-	 * Initialize the namespace manager and
-	 * the root of the namespace tree
-	 */
-	status = acpi_ns_root_initialize();
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status,
-				"During Namespace initialization"));
-		return_ACPI_STATUS(status);
-	}
-
-	/* If configured, initialize the AML debugger */
-
-	ACPI_DEBUGGER_EXEC(status = acpi_db_initialize());
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_enable_subsystem
- *
- * PARAMETERS:  Flags           - Init/enable Options
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Completes the subsystem initialization including hardware.
- *              Puts system into ACPI mode if it isn't already.
- *
- ******************************************************************************/
-acpi_status acpi_enable_subsystem(u32 flags)
-{
-	acpi_status status = AE_OK;
-
-	ACPI_FUNCTION_TRACE(acpi_enable_subsystem);
-
-	/* Enable ACPI mode */
-
-	if (!(flags & ACPI_NO_ACPI_ENABLE)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-				  "[Init] Going into ACPI mode\n"));
-
-		acpi_gbl_original_mode = acpi_hw_get_mode();
-
-		status = acpi_enable();
-		if (ACPI_FAILURE(status)) {
-			ACPI_WARNING((AE_INFO, "AcpiEnable failed"));
-			return_ACPI_STATUS(status);
-		}
-	}
-
-	/*
-	 * Obtain a permanent mapping for the FACS. This is required for the
-	 * Global Lock and the Firmware Waking Vector
-	 */
-	status = acpi_tb_initialize_facs();
-	if (ACPI_FAILURE(status)) {
-		ACPI_WARNING((AE_INFO, "Could not map the FACS table"));
-		return_ACPI_STATUS(status);
-	}
-
-	/*
-	 * Install the default op_region handlers. These are installed unless
-	 * other handlers have already been installed via the
-	 * install_address_space_handler interface.
-	 */
-	if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-				  "[Init] Installing default address space handlers\n"));
-
-		status = acpi_ev_install_region_handlers();
-		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
-		}
-	}
-
-	/*
-	 * Initialize ACPI Event handling (Fixed and General Purpose)
-	 *
-	 * Note1: We must have the hardware and events initialized before we can
-	 * execute any control methods safely. Any control method can require
-	 * ACPI hardware support, so the hardware must be fully initialized before
-	 * any method execution!
-	 *
-	 * Note2: Fixed events are initialized and enabled here. GPEs are
-	 * initialized, but cannot be enabled until after the hardware is
-	 * completely initialized (SCI and global_lock activated)
-	 */
-	if (!(flags & ACPI_NO_EVENT_INIT)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-				  "[Init] Initializing ACPI events\n"));
-
-		status = acpi_ev_initialize_events();
-		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
-		}
-	}
-
-	/*
-	 * Install the SCI handler and Global Lock handler. This completes the
-	 * hardware initialization.
-	 */
-	if (!(flags & ACPI_NO_HANDLER_INIT)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-				  "[Init] Installing SCI/GL handlers\n"));
-
-		status = acpi_ev_install_xrupt_handlers();
-		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
-		}
-	}
-
-	return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_enable_subsystem)
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_initialize_objects
- *
- * PARAMETERS:  Flags           - Init/enable Options
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Completes namespace initialization by initializing device
- *              objects and executing AML code for Regions, buffers, etc.
- *
- ******************************************************************************/
-acpi_status acpi_initialize_objects(u32 flags)
-{
-	acpi_status status = AE_OK;
-
-	ACPI_FUNCTION_TRACE(acpi_initialize_objects);
-
-	/*
-	 * Run all _REG methods
-	 *
-	 * Note: Any objects accessed by the _REG methods will be automatically
-	 * initialized, even if they contain executable AML (see the call to
-	 * acpi_ns_initialize_objects below).
-	 */
-	if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-				  "[Init] Executing _REG OpRegion methods\n"));
-
-		status = acpi_ev_initialize_op_regions();
-		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
-		}
-	}
-
-	/*
-	 * Initialize the objects that remain uninitialized. This runs the
-	 * executable AML that may be part of the declaration of these objects:
-	 * operation_regions, buffer_fields, Buffers, and Packages.
-	 */
-	if (!(flags & ACPI_NO_OBJECT_INIT)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-				  "[Init] Completing Initialization of ACPI Objects\n"));
-
-		status = acpi_ns_initialize_objects();
-		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
-		}
-	}
-
-	/*
-	 * Initialize all device objects in the namespace. This runs the device
-	 * _STA and _INI methods.
-	 */
-	if (!(flags & ACPI_NO_DEVICE_INIT)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-				  "[Init] Initializing ACPI Devices\n"));
-
-		status = acpi_ns_initialize_devices();
-		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
-		}
-	}
-
-	/*
-	 * Complete the GPE initialization for the GPE blocks defined in the FADT
-	 * (GPE block 0 and 1).
-	 *
-	 * Note1: This is where the _PRW methods are executed for the GPEs. These
-	 * methods can only be executed after the SCI and Global Lock handlers are
-	 * installed and initialized.
-	 *
-	 * Note2: Currently, there seems to be no need to run the _REG methods
-	 * before execution of the _PRW methods and enabling of the GPEs.
-	 */
-	if (!(flags & ACPI_NO_EVENT_INIT)) {
-		status = acpi_ev_install_fadt_gpes();
-		if (ACPI_FAILURE(status))
-			return (status);
-	}
-
-	/*
-	 * Empty the caches (delete the cached objects) on the assumption that
-	 * the table load filled them up more than they will be at runtime --
-	 * thus wasting non-paged memory.
-	 */
-	status = acpi_purge_cached_objects();
-
-	acpi_gbl_startup_flags |= ACPI_INITIALIZED_OK;
-	return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_initialize_objects)
-
-#endif
-/*******************************************************************************
- *
- * FUNCTION:    acpi_terminate
- *
- * PARAMETERS:  None
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Shutdown the ACPI subsystem.  Release all resources.
- *
- ******************************************************************************/
-acpi_status acpi_terminate(void)
-{
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(acpi_terminate);
-
-	/* Terminate the AML Debugger if present */
-
-	ACPI_DEBUGGER_EXEC(acpi_gbl_db_terminate_threads = TRUE);
-
-	/* Shutdown and free all resources */
-
-	acpi_ut_subsystem_shutdown();
-
-	/* Free the mutex objects */
-
-	acpi_ut_mutex_terminate();
-
-#ifdef ACPI_DEBUGGER
-
-	/* Shut down the debugger */
-
-	acpi_db_terminate();
-#endif
-
-	/* Now we can shutdown the OS-dependent layer */
-
-	status = acpi_os_terminate();
-	return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_terminate)
-#ifndef ACPI_ASL_COMPILER
-#ifdef ACPI_FUTURE_USAGE
-/*******************************************************************************
- *
- * FUNCTION:    acpi_subsystem_status
- *
- * PARAMETERS:  None
- *
- * RETURN:      Status of the ACPI subsystem
- *
- * DESCRIPTION: Other drivers that use the ACPI subsystem should call this
- *              before making any other calls, to ensure the subsystem
- *              initialized successfully.
- *
- ******************************************************************************/
-acpi_status acpi_subsystem_status(void)
-{
-
-	if (acpi_gbl_startup_flags & ACPI_INITIALIZED_OK) {
-		return (AE_OK);
-	} else {
-		return (AE_ERROR);
-	}
-}
-
-ACPI_EXPORT_SYMBOL(acpi_subsystem_status)
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_get_system_info
- *
- * PARAMETERS:  out_buffer      - A buffer to receive the resources for the
- *                                device
- *
- * RETURN:      Status          - the status of the call
- *
- * DESCRIPTION: This function is called to get information about the current
- *              state of the ACPI subsystem.  It will return system information
- *              in the out_buffer.
- *
- *              If the function fails an appropriate status will be returned
- *              and the value of out_buffer is undefined.
- *
- ******************************************************************************/
-acpi_status acpi_get_system_info(struct acpi_buffer * out_buffer)
-{
-	struct acpi_system_info *info_ptr;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE(acpi_get_system_info);
-
-	/* Parameter validation */
-
-	status = acpi_ut_validate_buffer(out_buffer);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Validate/Allocate/Clear caller buffer */
-
-	status =
-	    acpi_ut_initialize_buffer(out_buffer,
-				      sizeof(struct acpi_system_info));
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/*
-	 * Populate the return buffer
-	 */
-	info_ptr = (struct acpi_system_info *)out_buffer->pointer;
-
-	info_ptr->acpi_ca_version = ACPI_CA_VERSION;
-
-	/* System flags (ACPI capabilities) */
-
-	info_ptr->flags = ACPI_SYS_MODE_ACPI;
-
-	/* Timer resolution - 24 or 32 bits  */
-
-	if (acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) {
-		info_ptr->timer_resolution = 24;
-	} else {
-		info_ptr->timer_resolution = 32;
-	}
-
-	/* Clear the reserved fields */
-
-	info_ptr->reserved1 = 0;
-	info_ptr->reserved2 = 0;
-
-	/* Current debug levels */
-
-	info_ptr->debug_layer = acpi_dbg_layer;
-	info_ptr->debug_level = acpi_dbg_level;
-
-	return_ACPI_STATUS(AE_OK);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_get_system_info)
-
-/*****************************************************************************
- *
- * FUNCTION:    acpi_install_initialization_handler
- *
- * PARAMETERS:  Handler             - Callback procedure
- *              Function            - Not (currently) used, see below
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Install an initialization handler
- *
- * TBD: When a second function is added, must save the Function also.
- *
- ****************************************************************************/
-acpi_status
-acpi_install_initialization_handler(acpi_init_handler handler, u32 function)
-{
-
-	if (!handler) {
-		return (AE_BAD_PARAMETER);
-	}
-
-	if (acpi_gbl_init_handler) {
-		return (AE_ALREADY_EXISTS);
-	}
-
-	acpi_gbl_init_handler = handler;
-	return AE_OK;
-}
-
-ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
-#endif				/*  ACPI_FUTURE_USAGE  */
-/*****************************************************************************
- *
- * FUNCTION:    acpi_purge_cached_objects
- *
- * PARAMETERS:  None
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Empty all caches (delete the cached objects)
- *
- ****************************************************************************/
-acpi_status acpi_purge_cached_objects(void)
-{
-	ACPI_FUNCTION_TRACE(acpi_purge_cached_objects);
-
-	(void)acpi_os_purge_cache(acpi_gbl_state_cache);
-	(void)acpi_os_purge_cache(acpi_gbl_operand_cache);
-	(void)acpi_os_purge_cache(acpi_gbl_ps_node_cache);
-	(void)acpi_os_purge_cache(acpi_gbl_ps_node_ext_cache);
-	return_ACPI_STATUS(AE_OK);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_purge_cached_objects)
-#endif