Merge branch 'next-mtd' of git://aeryn.fluff.org.uk/bjdooks/linux

6 files changed, 118 insertions, 23 deletions

diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index 17e50824a6f..72ac28da14e 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -5,40 +5,43 @@
 ccflags-y			:= -Os
 ccflags-$(CONFIG_ACPI_DEBUG)	+= -DACPI_DEBUG_OUTPUT
 
-obj-y := dsfield.o   dsmthdat.o  dsopcode.o  dswexec.o  dswscope.o \
+# use acpi.o to put all files here into acpi.o modparam namespace
+obj-y	+= acpi.o
+
+acpi-y := dsfield.o   dsmthdat.o  dsopcode.o  dswexec.o  dswscope.o \
 	 dsmethod.o  dsobject.o  dsutils.o   dswload.o  dswstate.o \
 	 dsinit.o
 
-obj-y += evevent.o  evregion.o  evsci.o    evxfevnt.o \
+acpi-y += evevent.o  evregion.o  evsci.o    evxfevnt.o \
 	 evmisc.o   evrgnini.o  evxface.o  evxfregn.o \
 	 evgpe.o    evgpeblk.o
 
-obj-y += exconfig.o  exfield.o  exnames.o   exoparg6.o  exresolv.o  exstorob.o\
+acpi-y += exconfig.o  exfield.o  exnames.o   exoparg6.o  exresolv.o  exstorob.o\
 	 exconvrt.o  exfldio.o  exoparg1.o  exprep.o    exresop.o   exsystem.o\
 	 excreate.o  exmisc.o   exoparg2.o  exregion.o  exstore.o   exutils.o \
 	 exdump.o    exmutex.o  exoparg3.o  exresnte.o  exstoren.o
 
-obj-y += hwacpi.o  hwgpe.o  hwregs.o  hwsleep.o hwxface.o hwvalid.o
+acpi-y += hwacpi.o  hwgpe.o  hwregs.o  hwsleep.o hwxface.o hwvalid.o
 
-obj-$(ACPI_FUTURE_USAGE) += hwtimer.o
+acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o
 
-obj-y += nsaccess.o  nsload.o    nssearch.o  nsxfeval.o \
+acpi-y += nsaccess.o  nsload.o    nssearch.o  nsxfeval.o \
 	 nsalloc.o   nseval.o    nsnames.o   nsutils.o   nsxfname.o \
 	 nsdump.o    nsinit.o    nsobject.o  nswalk.o    nsxfobj.o  \
 	 nsparse.o   nspredef.o
 
-obj-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
+acpi-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
 
-obj-y += psargs.o    psparse.o  psloop.o pstree.o   pswalk.o  \
+acpi-y += psargs.o    psparse.o  psloop.o pstree.o   pswalk.o  \
 	 psopcode.o  psscope.o  psutils.o  psxface.o
 
-obj-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
+acpi-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
 	 rscalc.o  rsirq.o  rsmemory.o  rsutils.o
 
-obj-$(ACPI_FUTURE_USAGE) += rsdump.o
+acpi-$(ACPI_FUTURE_USAGE) += rsdump.o
 
-obj-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o
+acpi-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o
 
-obj-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
+acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
 		utcopy.o utdelete.o utglobal.o utmath.o utobject.o \
 		utstate.o utmutex.o utobject.o utresrc.o utlock.o
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 772ee5c4ccc..2ec394a328e 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -787,7 +787,12 @@ struct acpi_bit_register_info {
 
 /* For control registers, both ignored and reserved bits must be preserved */
 
-#define ACPI_PM1_CONTROL_IGNORED_BITS           0x0201	/* Bits 9, 0(SCI_EN) */
+/*
+ * The ACPI spec says to ignore PM1_CTL.SCI_EN (bit 0)
+ * but we need to be able to write ACPI_BITREG_SCI_ENABLE directly
+ * as a BIOS workaround on some machines.
+ */
+#define ACPI_PM1_CONTROL_IGNORED_BITS           0x0200	/* Bits 9 */
 #define ACPI_PM1_CONTROL_RESERVED_BITS          0xC1F8	/* Bits 14-15, 3-8 */
 #define ACPI_PM1_CONTROL_PRESERVED_BITS \
 	       (ACPI_PM1_CONTROL_IGNORED_BITS | ACPI_PM1_CONTROL_RESERVED_BITS)
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index e8f7b64e92d..ae862f1798d 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -312,7 +312,7 @@ int acpi_bus_set_power(acpi_handle handle, int state)
       end:
 	if (result)
 		printk(KERN_WARNING PREFIX
-			      "Transitioning device [%s] to D%d\n",
+			      "Device [%s] failed to transition to D%d\n",
 			      device->pnp.bus_id, state);
 	else {
 		device->power.state = state;
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index f7ca8c55956..72069ba5f1e 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -202,21 +202,44 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr,
  * Suspend / resume control
  */
 static int acpi_idle_suspend;
+static u32 saved_bm_rld;
+
+static void acpi_idle_bm_rld_save(void)
+{
+	acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld);
+}
+static void acpi_idle_bm_rld_restore(void)
+{
+	u32 resumed_bm_rld;
+
+	acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld);
+
+	if (resumed_bm_rld != saved_bm_rld)
+		acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
+}
 
 int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
 {
+	if (acpi_idle_suspend == 1)
+		return 0;
+
+	acpi_idle_bm_rld_save();
 	acpi_idle_suspend = 1;
 	return 0;
 }
 
 int acpi_processor_resume(struct acpi_device * device)
 {
+	if (acpi_idle_suspend == 0)
+		return 0;
+
+	acpi_idle_bm_rld_restore();
 	acpi_idle_suspend = 0;
 	return 0;
 }
 
 #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-static int tsc_halts_in_c(int state)
+static void tsc_check_state(int state)
 {
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
@@ -226,13 +249,17 @@ static int tsc_halts_in_c(int state)
 		 * C/P/S0/S1 states when this bit is set.
 		 */
 		if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
-			return 0;
+			return;
 
 		/*FALL THROUGH*/
 	default:
-		return state > ACPI_STATE_C1;
+		/* TSC could halt in idle, so notify users */
+		if (state > ACPI_STATE_C1)
+			mark_tsc_unstable("TSC halts in idle");
 	}
 }
+#else
+static void tsc_check_state(int state) { return; }
 #endif
 
 static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
@@ -578,14 +605,9 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 
 	pr->power.timer_broadcast_on_state = INT_MAX;
 
-	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
+	for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
 		struct acpi_processor_cx *cx = &pr->power.states[i];
 
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-		/* TSC could halt in idle, so notify users */
-		if (tsc_halts_in_c(cx->type))
-			mark_tsc_unstable("TSC halts in idle");;
-#endif
 		switch (cx->type) {
 		case ACPI_STATE_C1:
 			cx->valid = 1;
@@ -603,6 +625,8 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 				acpi_timer_check_state(i, pr, cx);
 			break;
 		}
+		if (cx->valid)
+			tsc_check_state(cx->type);
 
 		if (cx->valid)
 			working++;
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index d0d1f4d5043..7f16f5f8e7d 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -45,6 +45,14 @@
 #define _COMPONENT              ACPI_PROCESSOR_COMPONENT
 ACPI_MODULE_NAME("processor_throttling");
 
+/* ignore_tpc:
+ *  0 -> acpi processor driver doesn't ignore _TPC values
+ *  1 -> acpi processor driver ignores _TPC values
+ */
+static int ignore_tpc;
+module_param(ignore_tpc, int, 0644);
+MODULE_PARM_DESC(ignore_tpc, "Disable broken BIOS _TPC throttling support");
+
 struct throttling_tstate {
 	unsigned int cpu;		/* cpu nr */
 	int target_state;		/* target T-state */
@@ -283,6 +291,10 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 
 	if (!pr)
 		return -EINVAL;
+
+	if (ignore_tpc)
+		goto end;
+
 	status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc);
 	if (ACPI_FAILURE(status)) {
 		if (status != AE_NOT_FOUND) {
@@ -290,6 +302,8 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
 		}
 		return -ENODEV;
 	}
+
+end:
 	pr->throttling_platform_limit = (int)tpc;
 	return 0;
 }
@@ -302,6 +316,9 @@ int acpi_processor_tstate_has_changed(struct acpi_processor *pr)
 	struct acpi_processor_limit *limit;
 	int target_state;
 
+	if (ignore_tpc)
+		return 0;
+
 	result = acpi_processor_get_platform_limit(pr);
 	if (result) {
 		/* Throttling Limit is unsupported */
@@ -821,6 +838,14 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
 	ret = acpi_read_throttling_status(pr, &value);
 	if (ret >= 0) {
 		state = acpi_get_throttling_state(pr, value);
+		if (state == -1) {
+			ACPI_WARNING((AE_INFO,
+				"Invalid throttling state, reset\n"));
+			state = 0;
+			ret = acpi_processor_set_throttling(pr, state);
+			if (ret)
+				return ret;
+		}
 		pr->throttling.state = state;
 	}
 
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index d7ff61c0d57..810cca90ca7 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -538,6 +538,41 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level)
 	return -EINVAL;
 }
 
+/*
+ * For some buggy _BQC methods, we need to add a constant value to
+ * the _BQC return value to get the actual current brightness level
+ */
+
+static int bqc_offset_aml_bug_workaround;
+static int __init video_set_bqc_offset(const struct dmi_system_id *d)
+{
+	bqc_offset_aml_bug_workaround = 9;
+	return 0;
+}
+
+static struct dmi_system_id video_dmi_table[] __initdata = {
+	/*
+	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
+	 */
+	{
+	 .callback = video_set_bqc_offset,
+	 .ident = "Acer Aspire 5720",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"),
+		},
+	},
+	{
+	 .callback = video_set_bqc_offset,
+	 .ident = "Acer Aspire 5710Z",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"),
+		},
+	},
+	{}
+};
+
 static int
 acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 					unsigned long long *level)
@@ -557,6 +592,7 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
 				*level = device->brightness->levels[*level + 2];
 
 			}
+			*level += bqc_offset_aml_bug_workaround;
 			device->brightness->curr = *level;
 			return 0;
 		} else {
@@ -2290,6 +2326,8 @@ EXPORT_SYMBOL(acpi_video_register);
 
 static int __init acpi_video_init(void)
 {
+	dmi_check_system(video_dmi_table);
+
 	if (intel_opregion_present())
 		return 0;