DRM: i915: add mode setting support

This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported.  HDMI, DisplayPort and additional SDVO output support will
follow.

Support for the mode setting code is controlled by the new 'modeset'
module option.  A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.

Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing.  So use caution when
enabling this code; be sure your user level code supports the new
interfaces.

A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.

Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

26 files changed, 10566 insertions, 50 deletions

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index a8b33c2ec8d..5f26d6c840d 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -76,6 +76,17 @@ config DRM_I915
 
 endchoice
 
+config DRM_I915_KMS
+	bool "Enable modesetting on intel by default"
+	depends on DRM_I915
+	help
+	Choose this option if you want kernel modesetting enabled by default,
+	and you have a new enough userspace to support this. Running old
+	userspaces with this enabled will cause pain.  Note that this causes
+	the driver to bind to PCI devices, which precludes loading things
+	like intelfb.
+
+
 config DRM_MGA
 	tristate "Matrox g200/g400"
 	depends on DRM
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index d8fb5d8ee7e..dd57a5bd457 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -8,7 +8,22 @@ i915-y := i915_drv.o i915_dma.o i915_irq.o i915_mem.o \
 	  i915_gem.o \
 	  i915_gem_debug.o \
 	  i915_gem_proc.o \
-	  i915_gem_tiling.o
+	  i915_gem_tiling.o \
+	  intel_display.o \
+	  intel_crt.o \
+	  intel_lvds.o \
+	  intel_bios.o \
+	  intel_sdvo.o \
+	  intel_modes.o \
+	  intel_i2c.o \
+	  intel_fb.o \
+	  intel_tv.o \
+	  intel_dvo.o \
+	  dvo_ch7xxx.o \
+	  dvo_ch7017.o \
+	  dvo_ivch.o \
+	  dvo_tfp410.o \
+	  dvo_sil164.o
 
 i915-$(CONFIG_ACPI)	+= i915_opregion.o
 i915-$(CONFIG_COMPAT)   += i915_ioc32.o
diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h
new file mode 100644
index 00000000000..e80866c5e1a
--- /dev/null
+++ b/drivers/gpu/drm/i915/dvo.h
@@ -0,0 +1,151 @@
+/*
+ * Copyright © 2006 Eric Anholt
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _INTEL_DVO_H
+#define _INTEL_DVO_H
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "intel_drv.h"
+
+struct intel_dvo_device {
+	char *name;
+	int type;
+	/* DVOA/B/C output register */
+	u32 dvo_reg;
+	/* GPIO register used for i2c bus to control this device */
+	u32 gpio;
+	int slave_addr;
+	struct intel_i2c_chan *i2c_bus;
+
+	const struct intel_dvo_dev_ops *dev_ops;
+	void *dev_priv;
+
+	struct drm_display_mode *panel_fixed_mode;
+	bool panel_wants_dither;
+};
+
+struct intel_dvo_dev_ops {
+	/*
+	 * Initialize the device at startup time.
+	 * Returns NULL if the device does not exist.
+	 */
+	bool (*init)(struct intel_dvo_device *dvo,
+		     struct intel_i2c_chan *i2cbus);
+
+	/*
+	 * Called to allow the output a chance to create properties after the
+	 * RandR objects have been created.
+	 */
+	void (*create_resources)(struct intel_dvo_device *dvo);
+
+	/*
+	 * Turn on/off output or set intermediate power levels if available.
+	 *
+	 * Unsupported intermediate modes drop to the lower power setting.
+	 * If the  mode is DPMSModeOff, the output must be disabled,
+	 * as the DPLL may be disabled afterwards.
+	 */
+	void (*dpms)(struct intel_dvo_device *dvo, int mode);
+
+	/*
+	 * Saves the output's state for restoration on VT switch.
+	 */
+	void (*save)(struct intel_dvo_device *dvo);
+
+	/*
+	 * Restore's the output's state at VT switch.
+	 */
+	void (*restore)(struct intel_dvo_device *dvo);
+
+	/*
+	 * Callback for testing a video mode for a given output.
+	 *
+	 * This function should only check for cases where a mode can't
+	 * be supported on the output specifically, and not represent
+	 * generic CRTC limitations.
+	 *
+	 * \return MODE_OK if the mode is valid, or another MODE_* otherwise.
+	 */
+	int (*mode_valid)(struct intel_dvo_device *dvo,
+			  struct drm_display_mode *mode);
+
+	/*
+	 * Callback to adjust the mode to be set in the CRTC.
+	 *
+	 * This allows an output to adjust the clock or even the entire set of
+	 * timings, which is used for panels with fixed timings or for
+	 * buses with clock limitations.
+	 */
+	bool (*mode_fixup)(struct intel_dvo_device *dvo,
+			   struct drm_display_mode *mode,
+			   struct drm_display_mode *adjusted_mode);
+
+	/*
+	 * Callback for preparing mode changes on an output
+	 */
+	void (*prepare)(struct intel_dvo_device *dvo);
+
+	/*
+	 * Callback for committing mode changes on an output
+	 */
+	void (*commit)(struct intel_dvo_device *dvo);
+
+	/*
+	 * Callback for setting up a video mode after fixups have been made.
+	 *
+	 * This is only called while the output is disabled.  The dpms callback
+	 * must be all that's necessary for the output, to turn the output on
+	 * after this function is called.
+	 */
+	void (*mode_set)(struct intel_dvo_device *dvo,
+			 struct drm_display_mode *mode,
+			 struct drm_display_mode *adjusted_mode);
+
+	/*
+	 * Probe for a connected output, and return detect_status.
+	 */
+	enum drm_connector_status (*detect)(struct intel_dvo_device *dvo);
+
+	/**
+	 * Query the device for the modes it provides.
+	 *
+	 * This function may also update MonInfo, mm_width, and mm_height.
+	 *
+	 * \return singly-linked list of modes or NULL if no modes found.
+	 */
+	struct drm_display_mode *(*get_modes)(struct intel_dvo_device *dvo);
+
+	/**
+	 * Clean up driver-specific bits of the output
+	 */
+	void (*destroy) (struct intel_dvo_device *dvo);
+
+	/**
+	 * Debugging hook to dump device registers to log file
+	 */
+	void (*dump_regs)(struct intel_dvo_device *dvo);
+};
+
+#endif /* _INTEL_DVO_H */
diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c
new file mode 100644
index 00000000000..03d4b4973b0
--- /dev/null
+++ b/drivers/gpu/drm/i915/dvo_ch7017.c
@@ -0,0 +1,454 @@
+/*
+ * Copyright © 2006 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#include "dvo.h"
+
+#define CH7017_TV_DISPLAY_MODE		0x00
+#define CH7017_FLICKER_FILTER		0x01
+#define CH7017_VIDEO_BANDWIDTH		0x02
+#define CH7017_TEXT_ENHANCEMENT		0x03
+#define CH7017_START_ACTIVE_VIDEO	0x04
+#define CH7017_HORIZONTAL_POSITION	0x05
+#define CH7017_VERTICAL_POSITION	0x06
+#define CH7017_BLACK_LEVEL		0x07
+#define CH7017_CONTRAST_ENHANCEMENT	0x08
+#define CH7017_TV_PLL			0x09
+#define CH7017_TV_PLL_M			0x0a
+#define CH7017_TV_PLL_N			0x0b
+#define CH7017_SUB_CARRIER_0		0x0c
+#define CH7017_CIV_CONTROL		0x10
+#define CH7017_CIV_0			0x11
+#define CH7017_CHROMA_BOOST		0x14
+#define CH7017_CLOCK_MODE		0x1c
+#define CH7017_INPUT_CLOCK		0x1d
+#define CH7017_GPIO_CONTROL		0x1e
+#define CH7017_INPUT_DATA_FORMAT	0x1f
+#define CH7017_CONNECTION_DETECT	0x20
+#define CH7017_DAC_CONTROL		0x21
+#define CH7017_BUFFERED_CLOCK_OUTPUT	0x22
+#define CH7017_DEFEAT_VSYNC		0x47
+#define CH7017_TEST_PATTERN		0x48
+
+#define CH7017_POWER_MANAGEMENT		0x49
+/** Enables the TV output path. */
+#define CH7017_TV_EN			(1 << 0)
+#define CH7017_DAC0_POWER_DOWN		(1 << 1)
+#define CH7017_DAC1_POWER_DOWN		(1 << 2)
+#define CH7017_DAC2_POWER_DOWN		(1 << 3)
+#define CH7017_DAC3_POWER_DOWN		(1 << 4)
+/** Powers down the TV out block, and DAC0-3 */
+#define CH7017_TV_POWER_DOWN_EN		(1 << 5)
+
+#define CH7017_VERSION_ID		0x4a
+
+#define CH7017_DEVICE_ID		0x4b
+#define CH7017_DEVICE_ID_VALUE		0x1b
+#define CH7018_DEVICE_ID_VALUE		0x1a
+#define CH7019_DEVICE_ID_VALUE		0x19
+
+#define CH7017_XCLK_D2_ADJUST		0x53
+#define CH7017_UP_SCALER_COEFF_0	0x55
+#define CH7017_UP_SCALER_COEFF_1	0x56
+#define CH7017_UP_SCALER_COEFF_2	0x57
+#define CH7017_UP_SCALER_COEFF_3	0x58
+#define CH7017_UP_SCALER_COEFF_4	0x59
+#define CH7017_UP_SCALER_VERTICAL_INC_0	0x5a
+#define CH7017_UP_SCALER_VERTICAL_INC_1	0x5b
+#define CH7017_GPIO_INVERT		0x5c
+#define CH7017_UP_SCALER_HORIZONTAL_INC_0	0x5d
+#define CH7017_UP_SCALER_HORIZONTAL_INC_1	0x5e
+
+#define CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT	0x5f
+/**< Low bits of horizontal active pixel input */
+
+#define CH7017_ACTIVE_INPUT_LINE_OUTPUT	0x60
+/** High bits of horizontal active pixel input */
+#define CH7017_LVDS_HAP_INPUT_MASK	(0x7 << 0)
+/** High bits of vertical active line output */
+#define CH7017_LVDS_VAL_HIGH_MASK	(0x7 << 3)
+
+#define CH7017_VERTICAL_ACTIVE_LINE_OUTPUT	0x61
+/**< Low bits of vertical active line output */
+
+#define CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT	0x62
+/**< Low bits of horizontal active pixel output */
+
+#define CH7017_LVDS_POWER_DOWN		0x63
+/** High bits of horizontal active pixel output */
+#define CH7017_LVDS_HAP_HIGH_MASK	(0x7 << 0)
+/** Enables the LVDS power down state transition */
+#define CH7017_LVDS_POWER_DOWN_EN	(1 << 6)
+/** Enables the LVDS upscaler */
+#define CH7017_LVDS_UPSCALER_EN		(1 << 7)
+#define CH7017_LVDS_POWER_DOWN_DEFAULT_RESERVED 0x08
+
+#define CH7017_LVDS_ENCODING		0x64
+#define CH7017_LVDS_DITHER_2D		(1 << 2)
+#define CH7017_LVDS_DITHER_DIS		(1 << 3)
+#define CH7017_LVDS_DUAL_CHANNEL_EN	(1 << 4)
+#define CH7017_LVDS_24_BIT		(1 << 5)
+
+#define CH7017_LVDS_ENCODING_2		0x65
+
+#define CH7017_LVDS_PLL_CONTROL		0x66
+/** Enables the LVDS panel output path */
+#define CH7017_LVDS_PANEN		(1 << 0)
+/** Enables the LVDS panel backlight */
+#define CH7017_LVDS_BKLEN		(1 << 3)
+
+#define CH7017_POWER_SEQUENCING_T1	0x67
+#define CH7017_POWER_SEQUENCING_T2	0x68
+#define CH7017_POWER_SEQUENCING_T3	0x69
+#define CH7017_POWER_SEQUENCING_T4	0x6a
+#define CH7017_POWER_SEQUENCING_T5	0x6b
+#define CH7017_GPIO_DRIVER_TYPE		0x6c
+#define CH7017_GPIO_DATA		0x6d
+#define CH7017_GPIO_DIRECTION_CONTROL	0x6e
+
+#define CH7017_LVDS_PLL_FEEDBACK_DIV	0x71
+# define CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT 4
+# define CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT 0
+# define CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED 0x80
+
+#define CH7017_LVDS_PLL_VCO_CONTROL	0x72
+# define CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED 0x80
+# define CH7017_LVDS_PLL_VCO_SHIFT	4
+# define CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT 0
+
+#define CH7017_OUTPUTS_ENABLE		0x73
+# define CH7017_CHARGE_PUMP_LOW		0x0
+# define CH7017_CHARGE_PUMP_HIGH	0x3
+# define CH7017_LVDS_CHANNEL_A		(1 << 3)
+# define CH7017_LVDS_CHANNEL_B		(1 << 4)
+# define CH7017_TV_DAC_A		(1 << 5)
+# define CH7017_TV_DAC_B		(1 << 6)
+# define CH7017_DDC_SELECT_DC2		(1 << 7)
+
+#define CH7017_LVDS_OUTPUT_AMPLITUDE	0x74
+#define CH7017_LVDS_PLL_EMI_REDUCTION	0x75
+#define CH7017_LVDS_POWER_DOWN_FLICKER	0x76
+
+#define CH7017_LVDS_CONTROL_2		0x78
+# define CH7017_LOOP_FILTER_SHIFT	5
+# define CH7017_PHASE_DETECTOR_SHIFT	0
+
+#define CH7017_BANG_LIMIT_CONTROL	0x7f
+
+struct ch7017_priv {
+	uint8_t save_hapi;
+	uint8_t save_vali;
+	uint8_t save_valo;
+	uint8_t save_ailo;
+	uint8_t save_lvds_pll_vco;
+	uint8_t save_feedback_div;
+	uint8_t save_lvds_control_2;
+	uint8_t save_outputs_enable;
+	uint8_t save_lvds_power_down;
+	uint8_t save_power_management;
+};
+
+static void ch7017_dump_regs(struct intel_dvo_device *dvo);
+static void ch7017_dpms(struct intel_dvo_device *dvo, int mode);
+
+static bool ch7017_read(struct intel_dvo_device *dvo, int addr, uint8_t *val)
+{
+	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	u8 out_buf[2];
+	u8 in_buf[2];
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = i2cbus->slave_addr,
+			.flags = 0,
+			.len = 1,
+			.buf = out_buf,
+		},
+		{
+			.addr = i2cbus->slave_addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = in_buf,
+		}
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = 0;
+
+	if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) {
+		*val= in_buf[0];
+		return true;
+	};
+
+	return false;
+}
+
+static bool ch7017_write(struct intel_dvo_device *dvo, int addr, uint8_t val)
+{
+	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	uint8_t out_buf[2];
+	struct i2c_msg msg = {
+		.addr = i2cbus->slave_addr,
+		.flags = 0,
+		.len = 2,
+		.buf = out_buf,
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = val;
+
+	if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
+		return true;
+
+	return false;
+}
+
+/** Probes for a CH7017 on the given bus and slave address. */
+static bool ch7017_init(struct intel_dvo_device *dvo,
+			struct intel_i2c_chan *i2cbus)
+{
+	struct ch7017_priv *priv;
+	uint8_t val;
+
+	priv = kzalloc(sizeof(struct ch7017_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return false;
+
+	dvo->i2c_bus = i2cbus;
+	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->dev_priv = priv;
+
+	if (!ch7017_read(dvo, CH7017_DEVICE_ID, &val))
+		goto fail;
+
+	if (val != CH7017_DEVICE_ID_VALUE &&
+	    val != CH7018_DEVICE_ID_VALUE &&
+	    val != CH7019_DEVICE_ID_VALUE) {
+		DRM_DEBUG("ch701x not detected, got %d: from %s Slave %d.\n",
+			  val, i2cbus->adapter.name,i2cbus->slave_addr);
+		goto fail;
+	}
+
+	return true;
+fail:
+	kfree(priv);
+	return false;
+}
+
+static enum drm_connector_status ch7017_detect(struct intel_dvo_device *dvo)
+{
+	return connector_status_unknown;
+}
+
+static enum drm_mode_status ch7017_mode_valid(struct intel_dvo_device *dvo,
+					      struct drm_display_mode *mode)
+{
+	if (mode->clock > 160000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static void ch7017_mode_set(struct intel_dvo_device *dvo,
+			    struct drm_display_mode *mode,
+			    struct drm_display_mode *adjusted_mode)
+{
+	uint8_t lvds_pll_feedback_div, lvds_pll_vco_control;
+	uint8_t outputs_enable, lvds_control_2, lvds_power_down;
+	uint8_t horizontal_active_pixel_input;
+	uint8_t horizontal_active_pixel_output, vertical_active_line_output;
+	uint8_t active_input_line_output;
+
+	DRM_DEBUG("Registers before mode setting\n");
+	ch7017_dump_regs(dvo);
+
+	/* LVDS PLL settings from page 75 of 7017-7017ds.pdf*/
+	if (mode->clock < 100000) {
+		outputs_enable = CH7017_LVDS_CHANNEL_A | CH7017_CHARGE_PUMP_LOW;
+		lvds_pll_feedback_div = CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED |
+			(2 << CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT) |
+			(13 << CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT);
+		lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED |
+			(2 << CH7017_LVDS_PLL_VCO_SHIFT) |
+			(3 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT);
+		lvds_control_2 = (1 << CH7017_LOOP_FILTER_SHIFT) |
+			(0 << CH7017_PHASE_DETECTOR_SHIFT);
+	} else {
+		outputs_enable = CH7017_LVDS_CHANNEL_A | CH7017_CHARGE_PUMP_HIGH;
+		lvds_pll_feedback_div = CH7017_LVDS_PLL_FEEDBACK_DEFAULT_RESERVED |
+			(2 << CH7017_LVDS_PLL_FEED_BACK_DIVIDER_SHIFT) |
+			(3 << CH7017_LVDS_PLL_FEED_FORWARD_DIVIDER_SHIFT);
+		lvds_pll_feedback_div = 35;
+		lvds_control_2 = (3 << CH7017_LOOP_FILTER_SHIFT) |
+			(0 << CH7017_PHASE_DETECTOR_SHIFT);
+		if (1) { /* XXX: dual channel panel detection.  Assume yes for now. */
+			outputs_enable |= CH7017_LVDS_CHANNEL_B;
+			lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED |
+				(2 << CH7017_LVDS_PLL_VCO_SHIFT) |
+				(13 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT);
+		} else {
+			lvds_pll_vco_control = CH7017_LVDS_PLL_VCO_DEFAULT_RESERVED |
+				(1 << CH7017_LVDS_PLL_VCO_SHIFT) |
+				(13 << CH7017_LVDS_PLL_POST_SCALE_DIV_SHIFT);
+		}
+	}
+
+	horizontal_active_pixel_input = mode->hdisplay & 0x00ff;
+
+	vertical_active_line_output = mode->vdisplay & 0x00ff;
+	horizontal_active_pixel_output = mode->hdisplay & 0x00ff;
+
+	active_input_line_output = ((mode->hdisplay & 0x0700) >> 8) |
+				   (((mode->vdisplay & 0x0700) >> 8) << 3);
+
+	lvds_power_down = CH7017_LVDS_POWER_DOWN_DEFAULT_RESERVED |
+			  (mode->hdisplay & 0x0700) >> 8;
+
+	ch7017_dpms(dvo, DRM_MODE_DPMS_OFF);
+	ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT,
+			horizontal_active_pixel_input);
+	ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT,
+			horizontal_active_pixel_output);
+	ch7017_write(dvo, CH7017_VERTICAL_ACTIVE_LINE_OUTPUT,
+			vertical_active_line_output);
+	ch7017_write(dvo, CH7017_ACTIVE_INPUT_LINE_OUTPUT,
+			active_input_line_output);
+	ch7017_write(dvo, CH7017_LVDS_PLL_VCO_CONTROL, lvds_pll_vco_control);
+	ch7017_write(dvo, CH7017_LVDS_PLL_FEEDBACK_DIV, lvds_pll_feedback_div);
+	ch7017_write(dvo, CH7017_LVDS_CONTROL_2, lvds_control_2);
+	ch7017_write(dvo, CH7017_OUTPUTS_ENABLE, outputs_enable);
+
+	/* Turn the LVDS back on with new settings. */
+	ch7017_write(dvo, CH7017_LVDS_POWER_DOWN, lvds_power_down);
+
+	DRM_DEBUG("Registers after mode setting\n");
+	ch7017_dump_regs(dvo);
+}
+
+/* set the CH7017 power state */
+static void ch7017_dpms(struct intel_dvo_device *dvo, int mode)
+{
+	uint8_t val;
+
+	ch7017_read(dvo, CH7017_LVDS_POWER_DOWN, &val);
+
+	/* Turn off TV/VGA, and never turn it on since we don't support it. */
+	ch7017_write(dvo, CH7017_POWER_MANAGEMENT,
+			CH7017_DAC0_POWER_DOWN |
+			CH7017_DAC1_POWER_DOWN |
+			CH7017_DAC2_POWER_DOWN |
+			CH7017_DAC3_POWER_DOWN |
+			CH7017_TV_POWER_DOWN_EN);
+
+	if (mode == DRM_MODE_DPMS_ON) {
+		/* Turn on the LVDS */
+		ch7017_write(dvo, CH7017_LVDS_POWER_DOWN,
+			     val & ~CH7017_LVDS_POWER_DOWN_EN);
+	} else {
+		/* Turn off the LVDS */
+		ch7017_write(dvo, CH7017_LVDS_POWER_DOWN,
+			     val | CH7017_LVDS_POWER_DOWN_EN);
+	}
+
+	/* XXX: Should actually wait for update power status somehow */
+	udelay(20000);
+}
+
+static void ch7017_dump_regs(struct intel_dvo_device *dvo)
+{
+	uint8_t val;
+
+#define DUMP(reg)					\
+do {							\
+	ch7017_read(dvo, reg, &val);			\
+	DRM_DEBUG(#reg ": %02x\n", val);		\
+} while (0)
+
+	DUMP(CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT);
+	DUMP(CH7017_HORIZONTAL_ACTIVE_PIXEL_OUTPUT);
+	DUMP(CH7017_VERTICAL_ACTIVE_LINE_OUTPUT);
+	DUMP(CH7017_ACTIVE_INPUT_LINE_OUTPUT);
+	DUMP(CH7017_LVDS_PLL_VCO_CONTROL);
+	DUMP(CH7017_LVDS_PLL_FEEDBACK_DIV);
+	DUMP(CH7017_LVDS_CONTROL_2);
+	DUMP(CH7017_OUTPUTS_ENABLE);
+	DUMP(CH7017_LVDS_POWER_DOWN);
+}
+
+static void ch7017_save(struct intel_dvo_device *dvo)
+{
+	struct ch7017_priv *priv = dvo->dev_priv;
+
+	ch7017_read(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT, &priv->save_hapi);
+	ch7017_read(dvo, CH7017_VERTICAL_ACTIVE_LINE_OUTPUT, &priv->save_valo);
+	ch7017_read(dvo, CH7017_ACTIVE_INPUT_LINE_OUTPUT, &priv->save_ailo);
+	ch7017_read(dvo, CH7017_LVDS_PLL_VCO_CONTROL, &priv->save_lvds_pll_vco);
+	ch7017_read(dvo, CH7017_LVDS_PLL_FEEDBACK_DIV, &priv->save_feedback_div);
+	ch7017_read(dvo, CH7017_LVDS_CONTROL_2, &priv->save_lvds_control_2);
+	ch7017_read(dvo, CH7017_OUTPUTS_ENABLE, &priv->save_outputs_enable);
+	ch7017_read(dvo, CH7017_LVDS_POWER_DOWN, &priv->save_lvds_power_down);
+	ch7017_read(dvo, CH7017_POWER_MANAGEMENT, &priv->save_power_management);
+}
+
+static void ch7017_restore(struct intel_dvo_device *dvo)
+{
+	struct ch7017_priv *priv = dvo->dev_priv;
+
+	/* Power down before changing mode */
+	ch7017_dpms(dvo, DRM_MODE_DPMS_OFF);
+
+	ch7017_write(dvo, CH7017_HORIZONTAL_ACTIVE_PIXEL_INPUT, priv->save_hapi);
+	ch7017_write(dvo, CH7017_VERTICAL_ACTIVE_LINE_OUTPUT, priv->save_valo);
+	ch7017_write(dvo, CH7017_ACTIVE_INPUT_LINE_OUTPUT, priv->save_ailo);
+	ch7017_write(dvo, CH7017_LVDS_PLL_VCO_CONTROL, priv->save_lvds_pll_vco);
+	ch7017_write(dvo, CH7017_LVDS_PLL_FEEDBACK_DIV, priv->save_feedback_div);
+	ch7017_write(dvo, CH7017_LVDS_CONTROL_2, priv->save_lvds_control_2);
+	ch7017_write(dvo, CH7017_OUTPUTS_ENABLE, priv->save_outputs_enable);
+	ch7017_write(dvo, CH7017_LVDS_POWER_DOWN, priv->save_lvds_power_down);
+	ch7017_write(dvo, CH7017_POWER_MANAGEMENT, priv->save_power_management);
+}
+
+static void ch7017_destroy(struct intel_dvo_device *dvo)
+{
+	struct ch7017_priv *priv = dvo->dev_priv;
+
+	if (priv) {
+		kfree(priv);
+		dvo->dev_priv = NULL;
+	}
+}
+
+struct intel_dvo_dev_ops ch7017_ops = {
+	.init = ch7017_init,
+	.detect = ch7017_detect,
+	.mode_valid = ch7017_mode_valid,
+	.mode_set = ch7017_mode_set,
+	.dpms = ch7017_dpms,
+	.dump_regs = ch7017_dump_regs,
+	.save = ch7017_save,
+	.restore = ch7017_restore,
+	.destroy = ch7017_destroy,
+};
diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c
new file mode 100644
index 00000000000..d2fd95dbd03
--- /dev/null
+++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c
@@ -0,0 +1,368 @@
+/**************************************************************************
+
+Copyright © 2006 Dave Airlie
+
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sub license, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice (including the
+next paragraph) shall be included in all copies or substantial portions
+of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+**************************************************************************/
+
+#include "dvo.h"
+
+#define CH7xxx_REG_VID		0x4a
+#define CH7xxx_REG_DID		0x4b
+
+#define CH7011_VID		0x83 /* 7010 as well */
+#define CH7009A_VID		0x84
+#define CH7009B_VID		0x85
+#define CH7301_VID		0x95
+
+#define CH7xxx_VID		0x84
+#define CH7xxx_DID		0x17
+
+#define CH7xxx_NUM_REGS		0x4c
+
+#define CH7xxx_CM		0x1c
+#define CH7xxx_CM_XCM		(1<<0)
+#define CH7xxx_CM_MCP		(1<<2)
+#define CH7xxx_INPUT_CLOCK	0x1d
+#define CH7xxx_GPIO		0x1e
+#define CH7xxx_GPIO_HPIR	(1<<3)
+#define CH7xxx_IDF		0x1f
+
+#define CH7xxx_IDF_HSP		(1<<3)
+#define CH7xxx_IDF_VSP		(1<<4)
+
+#define CH7xxx_CONNECTION_DETECT 0x20
+#define CH7xxx_CDET_DVI		(1<<5)
+
+#define CH7301_DAC_CNTL		0x21
+#define CH7301_HOTPLUG		0x23
+#define CH7xxx_TCTL		0x31
+#define CH7xxx_TVCO		0x32
+#define CH7xxx_TPCP		0x33
+#define CH7xxx_TPD		0x34
+#define CH7xxx_TPVT		0x35
+#define CH7xxx_TLPF		0x36
+#define CH7xxx_TCT		0x37
+#define CH7301_TEST_PATTERN	0x48
+
+#define CH7xxx_PM		0x49
+#define CH7xxx_PM_FPD		(1<<0)
+#define CH7301_PM_DACPD0	(1<<1)
+#define CH7301_PM_DACPD1	(1<<2)
+#define CH7301_PM_DACPD2	(1<<3)
+#define CH7xxx_PM_DVIL		(1<<6)
+#define CH7xxx_PM_DVIP		(1<<7)
+
+#define CH7301_SYNC_POLARITY	0x56
+#define CH7301_SYNC_RGB_YUV	(1<<0)
+#define CH7301_SYNC_POL_DVI	(1<<5)
+
+/** @file
+ * driver for the Chrontel 7xxx DVI chip over DVO.
+ */
+
+static struct ch7xxx_id_struct {
+	uint8_t vid;
+	char *name;
+} ch7xxx_ids[] = {
+	{ CH7011_VID, "CH7011" },
+	{ CH7009A_VID, "CH7009A" },
+	{ CH7009B_VID, "CH7009B" },
+	{ CH7301_VID, "CH7301" },
+};
+
+struct ch7xxx_reg_state {
+    uint8_t regs[CH7xxx_NUM_REGS];
+};
+
+struct ch7xxx_priv {
+	bool quiet;
+
+	struct ch7xxx_reg_state save_reg;
+	struct ch7xxx_reg_state mode_reg;
+	uint8_t save_TCTL, save_TPCP, save_TPD, save_TPVT;
+	uint8_t save_TLPF, save_TCT, save_PM, save_IDF;
+};
+
+static void ch7xxx_save(struct intel_dvo_device *dvo);
+
+static char *ch7xxx_get_id(uint8_t vid)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ch7xxx_ids); i++) {
+		if (ch7xxx_ids[i].vid == vid)
+			return ch7xxx_ids[i].name;
+	}
+
+	return NULL;
+}
+
+/** Reads an 8 bit register */
+static bool ch7xxx_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
+{
+	struct ch7xxx_priv *ch7xxx= dvo->dev_priv;
+	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	u8 out_buf[2];
+	u8 in_buf[2];
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = i2cbus->slave_addr,
+			.flags = 0,
+			.len = 1,
+			.buf = out_buf,
+		},
+		{
+			.addr = i2cbus->slave_addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = in_buf,
+		}
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = 0;
+
+	if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) {
+		*ch = in_buf[0];
+		return true;
+	};
+
+	if (!ch7xxx->quiet) {
+		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
+			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+	}
+	return false;
+}
+
+/** Writes an 8 bit register */
+static bool ch7xxx_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
+{
+	struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
+	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	uint8_t out_buf[2];
+	struct i2c_msg msg = {
+		.addr = i2cbus->slave_addr,
+		.flags = 0,
+		.len = 2,
+		.buf = out_buf,
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = ch;
+
+	if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
+		return true;
+
+	if (!ch7xxx->quiet) {
+		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
+			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+	}
+
+	return false;
+}
+
+static bool ch7xxx_init(struct intel_dvo_device *dvo,
+			struct intel_i2c_chan *i2cbus)
+{
+	/* this will detect the CH7xxx chip on the specified i2c bus */
+	struct ch7xxx_priv *ch7xxx;
+	uint8_t vendor, device;
+	char *name;
+
+	ch7xxx = kzalloc(sizeof(struct ch7xxx_priv), GFP_KERNEL);
+	if (ch7xxx == NULL)
+		return false;
+
+	dvo->i2c_bus = i2cbus;
+	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->dev_priv = ch7xxx;
+	ch7xxx->quiet = true;
+
+	if (!ch7xxx_readb(dvo, CH7xxx_REG_VID, &vendor))
+		goto out;
+
+	name = ch7xxx_get_id(vendor);
+	if (!name) {
+		DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
+			  vendor, i2cbus->adapter.name, i2cbus->slave_addr);
+		goto out;
+	}
+
+
+	if (!ch7xxx_readb(dvo, CH7xxx_REG_DID, &device))
+		goto out;
+
+	if (device != CH7xxx_DID) {
+		DRM_DEBUG("ch7xxx not detected; got 0x%02x from %s slave %d.\n",
+			  vendor, i2cbus->adapter.name, i2cbus->slave_addr);
+		goto out;
+	}
+
+	ch7xxx->quiet = false;
+	DRM_DEBUG("Detected %s chipset, vendor/device ID 0x%02x/0x%02x\n",
+		  name, vendor, device);
+	return true;
+out:
+	kfree(ch7xxx);
+	return false;
+}
+
+static enum drm_connector_status ch7xxx_detect(struct intel_dvo_device *dvo)
+{
+	uint8_t cdet, orig_pm, pm;
+
+	ch7xxx_readb(dvo, CH7xxx_PM, &orig_pm);
+
+	pm = orig_pm;
+	pm &= ~CH7xxx_PM_FPD;
+	pm |= CH7xxx_PM_DVIL | CH7xxx_PM_DVIP;
+
+	ch7xxx_writeb(dvo, CH7xxx_PM, pm);
+
+	ch7xxx_readb(dvo, CH7xxx_CONNECTION_DETECT, &cdet);
+
+	ch7xxx_writeb(dvo, CH7xxx_PM, orig_pm);
+
+	if (cdet & CH7xxx_CDET_DVI)
+		return connector_status_connected;
+	return connector_status_disconnected;
+}
+
+static enum drm_mode_status ch7xxx_mode_valid(struct intel_dvo_device *dvo,
+					      struct drm_display_mode *mode)
+{
+	if (mode->clock > 165000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static void ch7xxx_mode_set(struct intel_dvo_device *dvo,
+			    struct drm_display_mode *mode,
+			    struct drm_display_mode *adjusted_mode)
+{
+	uint8_t tvco, tpcp, tpd, tlpf, idf;
+
+	if (mode->clock <= 65000) {
+		tvco = 0x23;
+		tpcp = 0x08;
+		tpd = 0x16;
+		tlpf = 0x60;
+	} else {
+		tvco = 0x2d;
+		tpcp = 0x06;
+		tpd = 0x26;
+		tlpf = 0xa0;
+	}
+
+	ch7xxx_writeb(dvo, CH7xxx_TCTL, 0x00);
+	ch7xxx_writeb(dvo, CH7xxx_TVCO, tvco);
+	ch7xxx_writeb(dvo, CH7xxx_TPCP, tpcp);
+	ch7xxx_writeb(dvo, CH7xxx_TPD, tpd);
+	ch7xxx_writeb(dvo, CH7xxx_TPVT, 0x30);
+	ch7xxx_writeb(dvo, CH7xxx_TLPF, tlpf);
+	ch7xxx_writeb(dvo, CH7xxx_TCT, 0x00);
+
+	ch7xxx_readb(dvo, CH7xxx_IDF, &idf);
+
+	idf &= ~(CH7xxx_IDF_HSP | CH7xxx_IDF_VSP);
+	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+		idf |= CH7xxx_IDF_HSP;
+
+	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+		idf |= CH7xxx_IDF_HSP;
+
+	ch7xxx_writeb(dvo, CH7xxx_IDF, idf);
+}
+
+/* set the CH7xxx power state */
+static void ch7xxx_dpms(struct intel_dvo_device *dvo, int mode)
+{
+	if (mode == DRM_MODE_DPMS_ON)
+		ch7xxx_writeb(dvo, CH7xxx_PM, CH7xxx_PM_DVIL | CH7xxx_PM_DVIP);
+	else
+		ch7xxx_writeb(dvo, CH7xxx_PM, CH7xxx_PM_FPD);
+}
+
+static void ch7xxx_dump_regs(struct intel_dvo_device *dvo)
+{
+	struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
+	int i;
+
+	for (i = 0; i < CH7xxx_NUM_REGS; i++) {
+		if ((i % 8) == 0 )
+			DRM_DEBUG("\n %02X: ", i);
+		DRM_DEBUG("%02X ", ch7xxx->mode_reg.regs[i]);
+	}
+}
+
+static void ch7xxx_save(struct intel_dvo_device *dvo)
+{
+	struct ch7xxx_priv *ch7xxx= dvo->dev_priv;
+
+	ch7xxx_readb(dvo, CH7xxx_TCTL, &ch7xxx->save_TCTL);
+	ch7xxx_readb(dvo, CH7xxx_TPCP, &ch7xxx->save_TPCP);
+	ch7xxx_readb(dvo, CH7xxx_TPD, &ch7xxx->save_TPD);
+	ch7xxx_readb(dvo, CH7xxx_TPVT, &ch7xxx->save_TPVT);
+	ch7xxx_readb(dvo, CH7xxx_TLPF, &ch7xxx->save_TLPF);
+	ch7xxx_readb(dvo, CH7xxx_PM, &ch7xxx->save_PM);
+	ch7xxx_readb(dvo, CH7xxx_IDF, &ch7xxx->save_IDF);
+}
+
+static void ch7xxx_restore(struct intel_dvo_device *dvo)
+{
+	struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
+
+	ch7xxx_writeb(dvo, CH7xxx_TCTL, ch7xxx->save_TCTL);
+	ch7xxx_writeb(dvo, CH7xxx_TPCP, ch7xxx->save_TPCP);
+	ch7xxx_writeb(dvo, CH7xxx_TPD, ch7xxx->save_TPD);
+	ch7xxx_writeb(dvo, CH7xxx_TPVT, ch7xxx->save_TPVT);
+	ch7xxx_writeb(dvo, CH7xxx_TLPF, ch7xxx->save_TLPF);
+	ch7xxx_writeb(dvo, CH7xxx_IDF, ch7xxx->save_IDF);
+	ch7xxx_writeb(dvo, CH7xxx_PM, ch7xxx->save_PM);
+}
+
+static void ch7xxx_destroy(struct intel_dvo_device *dvo)
+{
+	struct ch7xxx_priv *ch7xxx = dvo->dev_priv;
+
+	if (ch7xxx) {
+		kfree(ch7xxx);
+		dvo->dev_priv = NULL;
+	}
+}
+
+struct intel_dvo_dev_ops ch7xxx_ops = {
+	.init = ch7xxx_init,
+	.detect = ch7xxx_detect,
+	.mode_valid = ch7xxx_mode_valid,
+	.mode_set = ch7xxx_mode_set,
+	.dpms = ch7xxx_dpms,
+	.dump_regs = ch7xxx_dump_regs,
+	.save = ch7xxx_save,
+	.restore = ch7xxx_restore,
+	.destroy = ch7xxx_destroy,
+};
diff --git a/drivers/gpu/drm/i915/dvo_ivch.c b/drivers/gpu/drm/i915/dvo_ivch.c
new file mode 100644
index 00000000000..0c8d375e8e3
--- /dev/null
+++ b/drivers/gpu/drm/i915/dvo_ivch.c
@@ -0,0 +1,442 @@
+/*
+ * Copyright © 2006 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#include "dvo.h"
+
+/*
+ * register definitions for the i82807aa.
+ *
+ * Documentation on this chipset can be found in datasheet #29069001 at
+ * intel.com.
+ */
+
+/*
+ * VCH Revision & GMBus Base Addr
+ */
+#define VR00		0x00
+# define VR00_BASE_ADDRESS_MASK		0x007f
+
+/*
+ * Functionality Enable
+ */
+#define VR01		0x01
+
+/*
+ * Enable the panel fitter
+ */
+# define VR01_PANEL_FIT_ENABLE		(1 << 3)
+/*
+ * Enables the LCD display.
+ *
+ * This must not be set while VR01_DVO_BYPASS_ENABLE is set.
+ */
+# define VR01_LCD_ENABLE		(1 << 2)
+/** Enables the DVO repeater. */
+# define VR01_DVO_BYPASS_ENABLE		(1 << 1)
+/** Enables the DVO clock */
+# define VR01_DVO_ENABLE		(1 << 0)
+
+/*
+ * LCD Interface Format
+ */
+#define VR10		0x10
+/** Enables LVDS output instead of CMOS */
+# define VR10_LVDS_ENABLE		(1 << 4)
+/** Enables 18-bit LVDS output. */
+# define VR10_INTERFACE_1X18		(0 << 2)
+/** Enables 24-bit LVDS or CMOS output */
+# define VR10_INTERFACE_1X24		(1 << 2)
+/** Enables 2x18-bit LVDS or CMOS output. */
+# define VR10_INTERFACE_2X18		(2 << 2)
+/** Enables 2x24-bit LVDS output */
+# define VR10_INTERFACE_2X24		(3 << 2)
+
+/*
+ * VR20 LCD Horizontal Display Size
+ */
+#define VR20	0x20
+
+/*
+ * LCD Vertical Display Size
+ */
+#define VR21	0x20
+
+/*
+ * Panel power down status
+ */
+#define VR30		0x30
+/** Read only bit indicating that the panel is not in a safe poweroff state. */
+# define VR30_PANEL_ON			(1 << 15)
+
+#define VR40		0x40
+# define VR40_STALL_ENABLE		(1 << 13)
+# define VR40_VERTICAL_INTERP_ENABLE	(1 << 12)
+# define VR40_ENHANCED_PANEL_FITTING	(1 << 11)
+# define VR40_HORIZONTAL_INTERP_ENABLE	(1 << 10)
+# define VR40_AUTO_RATIO_ENABLE		(1 << 9)
+# define VR40_CLOCK_GATING_ENABLE	(1 << 8)
+
+/*
+ * Panel Fitting Vertical Ratio
+ * (((image_height - 1) << 16) / ((panel_height - 1))) >> 2
+ */
+#define VR41		0x41
+
+/*
+ * Panel Fitting Horizontal Ratio
+ * (((image_width - 1) << 16) / ((panel_width - 1))) >> 2
+ */
+#define VR42		0x42
+
+/*
+ * Horizontal Image Size
+ */
+#define VR43		0x43
+
+/* VR80 GPIO 0
+ */
+#define VR80	    0x80
+#define VR81	    0x81
+#define VR82	    0x82
+#define VR83	    0x83
+#define VR84	    0x84
+#define VR85	    0x85
+#define VR86	    0x86
+#define VR87	    0x87
+
+/* VR88 GPIO 8
+ */
+#define VR88	    0x88
+
+/* Graphics BIOS scratch 0
+ */
+#define VR8E	    0x8E
+# define VR8E_PANEL_TYPE_MASK		(0xf << 0)
+# define VR8E_PANEL_INTERFACE_CMOS	(0 << 4)
+# define VR8E_PANEL_INTERFACE_LVDS	(1 << 4)
+# define VR8E_FORCE_DEFAULT_PANEL	(1 << 5)
+
+/* Graphics BIOS scratch 1
+ */
+#define VR8F	    0x8F
+# define VR8F_VCH_PRESENT		(1 << 0)
+# define VR8F_DISPLAY_CONN		(1 << 1)
+# define VR8F_POWER_MASK		(0x3c)
+# define VR8F_POWER_POS			(2)
+
+
+struct ivch_priv {
+	bool quiet;
+
+	uint16_t width, height;
+
+	uint16_t save_VR01;
+	uint16_t save_VR40;
+};
+
+
+static void ivch_dump_regs(struct intel_dvo_device *dvo);
+
+/**
+ * Reads a register on the ivch.
+ *
+ * Each of the 256 registers are 16 bits long.
+ */
+static bool ivch_read(struct intel_dvo_device *dvo, int addr, uint16_t *data)
+{
+	struct ivch_priv *priv = dvo->dev_priv;
+	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	u8 out_buf[1];
+	u8 in_buf[2];
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = i2cbus->slave_addr,
+			.flags = I2C_M_RD,
+			.len = 0,
+		},
+		{
+			.addr = 0,
+			.flags = I2C_M_NOSTART,
+			.len = 1,
+			.buf = out_buf,
+		},
+		{
+			.addr = i2cbus->slave_addr,
+			.flags = I2C_M_RD | I2C_M_NOSTART,
+			.len = 2,
+			.buf = in_buf,
+		}
+	};
+
+	out_buf[0] = addr;
+
+	if (i2c_transfer(&i2cbus->adapter, msgs, 3) == 3) {
+		*data = (in_buf[1] << 8) | in_buf[0];
+		return true;
+	};
+
+	if (!priv->quiet) {
+		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
+			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+	}
+	return false;
+}
+
+/** Writes a 16-bit register on the ivch */
+static bool ivch_write(struct intel_dvo_device *dvo, int addr, uint16_t data)
+{
+	struct ivch_priv *priv = dvo->dev_priv;
+	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	u8 out_buf[3];
+	struct i2c_msg msg = {
+		.addr = i2cbus->slave_addr,
+		.flags = 0,
+		.len = 3,
+		.buf = out_buf,
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = data & 0xff;
+	out_buf[2] = data >> 8;
+
+	if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
+		return true;
+
+	if (!priv->quiet) {
+		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
+			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+	}
+
+	return false;
+}
+
+/** Probes the given bus and slave address for an ivch */
+static bool ivch_init(struct intel_dvo_device *dvo,
+		      struct intel_i2c_chan *i2cbus)
+{
+	struct ivch_priv *priv;
+	uint16_t temp;
+
+	priv = kzalloc(sizeof(struct ivch_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return false;
+
+	dvo->i2c_bus = i2cbus;
+	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->dev_priv = priv;
+	priv->quiet = true;
+
+	if (!ivch_read(dvo, VR00, &temp))
+		goto out;
+	priv->quiet = false;
+
+	/* Since the identification bits are probably zeroes, which doesn't seem
+	 * very unique, check that the value in the base address field matches
+	 * the address it's responding on.
+	 */
+	if ((temp & VR00_BASE_ADDRESS_MASK) != dvo->slave_addr) {
+		DRM_DEBUG("ivch detect failed due to address mismatch "
+			  "(%d vs %d)\n",
+			  (temp & VR00_BASE_ADDRESS_MASK), dvo->slave_addr);
+		goto out;
+	}
+
+	ivch_read(dvo, VR20, &priv->width);
+	ivch_read(dvo, VR21, &priv->height);
+
+	return true;
+
+out:
+	kfree(priv);
+	return false;
+}
+
+static enum drm_connector_status ivch_detect(struct intel_dvo_device *dvo)
+{
+	return connector_status_connected;
+}
+
+static enum drm_mode_status ivch_mode_valid(struct intel_dvo_device *dvo,
+					    struct drm_display_mode *mode)
+{
+	if (mode->clock > 112000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+/** Sets the power state of the panel connected to the ivch */
+static void ivch_dpms(struct intel_dvo_device *dvo, int mode)
+{
+	int i;
+	uint16_t vr01, vr30, backlight;
+
+	/* Set the new power state of the panel. */
+	if (!ivch_read(dvo, VR01, &vr01))
+		return;
+
+	if (mode == DRM_MODE_DPMS_ON)
+		backlight = 1;
+	else
+		backlight = 0;
+	ivch_write(dvo, VR80, backlight);
+
+	if (mode == DRM_MODE_DPMS_ON)
+		vr01 |= VR01_LCD_ENABLE | VR01_DVO_ENABLE;
+	else
+		vr01 &= ~(VR01_LCD_ENABLE | VR01_DVO_ENABLE);
+
+	ivch_write(dvo, VR01, vr01);
+
+	/* Wait for the panel to make its state transition */
+	for (i = 0; i < 100; i++) {
+		if (!ivch_read(dvo, VR30, &vr30))
+			break;
+
+		if (((vr30 & VR30_PANEL_ON) != 0) == (mode == DRM_MODE_DPMS_ON))
+			break;
+		udelay(1000);
+	}
+	/* wait some more; vch may fail to resync sometimes without this */
+	udelay(16 * 1000);
+}
+
+static void ivch_mode_set(struct intel_dvo_device *dvo,
+			  struct drm_display_mode *mode,
+			  struct drm_display_mode *adjusted_mode)
+{
+	uint16_t vr40 = 0;
+	uint16_t vr01;
+
+	vr01 = 0;
+	vr40 = (VR40_STALL_ENABLE | VR40_VERTICAL_INTERP_ENABLE |
+		VR40_HORIZONTAL_INTERP_ENABLE);
+
+	if (mode->hdisplay != adjusted_mode->hdisplay ||
+	    mode->vdisplay != adjusted_mode->vdisplay) {
+		uint16_t x_ratio, y_ratio;
+
+		vr01 |= VR01_PANEL_FIT_ENABLE;
+		vr40 |= VR40_CLOCK_GATING_ENABLE;
+		x_ratio = (((mode->hdisplay - 1) << 16) /
+			   (adjusted_mode->hdisplay - 1)) >> 2;
+		y_ratio = (((mode->vdisplay - 1) << 16) /
+			   (adjusted_mode->vdisplay - 1)) >> 2;
+		ivch_write (dvo, VR42, x_ratio);
+		ivch_write (dvo, VR41, y_ratio);
+	} else {
+		vr01 &= ~VR01_PANEL_FIT_ENABLE;
+		vr40 &= ~VR40_CLOCK_GATING_ENABLE;
+	}
+	vr40 &= ~VR40_AUTO_RATIO_ENABLE;
+
+	ivch_write(dvo, VR01, vr01);
+	ivch_write(dvo, VR40, vr40);
+
+	ivch_dump_regs(dvo);
+}
+
+static void ivch_dump_regs(struct intel_dvo_device *dvo)
+{
+	uint16_t val;
+
+	ivch_read(dvo, VR00, &val);
+	DRM_DEBUG("VR00: 0x%04x\n", val);
+	ivch_read(dvo, VR01, &val);
+	DRM_DEBUG("VR01: 0x%04x\n", val);
+	ivch_read(dvo, VR30, &val);
+	DRM_DEBUG("VR30: 0x%04x\n", val);
+	ivch_read(dvo, VR40, &val);
+	DRM_DEBUG("VR40: 0x%04x\n", val);
+
+	/* GPIO registers */
+	ivch_read(dvo, VR80, &val);
+	DRM_DEBUG("VR80: 0x%04x\n", val);
+	ivch_read(dvo, VR81, &val);
+	DRM_DEBUG("VR81: 0x%04x\n", val);
+	ivch_read(dvo, VR82, &val);
+	DRM_DEBUG("VR82: 0x%04x\n", val);
+	ivch_read(dvo, VR83, &val);
+	DRM_DEBUG("VR83: 0x%04x\n", val);
+	ivch_read(dvo, VR84, &val);
+	DRM_DEBUG("VR84: 0x%04x\n", val);
+	ivch_read(dvo, VR85, &val);
+	DRM_DEBUG("VR85: 0x%04x\n", val);
+	ivch_read(dvo, VR86, &val);
+	DRM_DEBUG("VR86: 0x%04x\n", val);
+	ivch_read(dvo, VR87, &val);
+	DRM_DEBUG("VR87: 0x%04x\n", val);
+	ivch_read(dvo, VR88, &val);
+	DRM_DEBUG("VR88: 0x%04x\n", val);
+
+	/* Scratch register 0 - AIM Panel type */
+	ivch_read(dvo, VR8E, &val);
+	DRM_DEBUG("VR8E: 0x%04x\n", val);
+
+	/* Scratch register 1 - Status register */
+	ivch_read(dvo, VR8F, &val);
+	DRM_DEBUG("VR8F: 0x%04x\n", val);
+}
+
+static void ivch_save(struct intel_dvo_device *dvo)
+{
+	struct ivch_priv *priv = dvo->dev_priv;
+
+	ivch_read(dvo, VR01, &priv->save_VR01);
+	ivch_read(dvo, VR40, &priv->save_VR40);
+}
+
+static void ivch_restore(struct intel_dvo_device *dvo)
+{
+	struct ivch_priv *priv = dvo->dev_priv;
+
+	ivch_write(dvo, VR01, priv->save_VR01);
+	ivch_write(dvo, VR40, priv->save_VR40);
+}
+
+static void ivch_destroy(struct intel_dvo_device *dvo)
+{
+	struct ivch_priv *priv = dvo->dev_priv;
+
+	if (priv) {
+		kfree(priv);
+		dvo->dev_priv = NULL;
+	}
+}
+
+struct intel_dvo_dev_ops ivch_ops= {
+	.init = ivch_init,
+	.dpms = ivch_dpms,
+	.save = ivch_save,
+	.restore = ivch_restore,
+	.mode_valid = ivch_mode_valid,
+	.mode_set = ivch_mode_set,
+	.detect = ivch_detect,
+	.dump_regs = ivch_dump_regs,
+	.destroy = ivch_destroy,
+};
diff --git a/drivers/gpu/drm/i915/dvo_sil164.c b/drivers/gpu/drm/i915/dvo_sil164.c
new file mode 100644
index 00000000000..033a4bb070b
--- /dev/null
+++ b/drivers/gpu/drm/i915/dvo_sil164.c
@@ -0,0 +1,302 @@
+/**************************************************************************
+
+Copyright © 2006 Dave Airlie
+
+All Rights Reserved.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sub license, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice (including the
+next paragraph) shall be included in all copies or substantial portions
+of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+**************************************************************************/
+
+#include "dvo.h"
+
+#define SIL164_VID 0x0001
+#define SIL164_DID 0x0006
+
+#define SIL164_VID_LO 0x00
+#define SIL164_VID_HI 0x01
+#define SIL164_DID_LO 0x02
+#define SIL164_DID_HI 0x03
+#define SIL164_REV    0x04
+#define SIL164_RSVD   0x05
+#define SIL164_FREQ_LO 0x06
+#define SIL164_FREQ_HI 0x07
+
+#define SIL164_REG8 0x08
+#define SIL164_8_VEN (1<<5)
+#define SIL164_8_HEN (1<<4)
+#define SIL164_8_DSEL (1<<3)
+#define SIL164_8_BSEL (1<<2)
+#define SIL164_8_EDGE (1<<1)
+#define SIL164_8_PD   (1<<0)
+
+#define SIL164_REG9 0x09
+#define SIL164_9_VLOW (1<<7)
+#define SIL164_9_MSEL_MASK (0x7<<4)
+#define SIL164_9_TSEL (1<<3)
+#define SIL164_9_RSEN (1<<2)
+#define SIL164_9_HTPLG (1<<1)
+#define SIL164_9_MDI (1<<0)
+
+#define SIL164_REGC 0x0c
+
+struct sil164_save_rec {
+	uint8_t reg8;
+	uint8_t reg9;
+	uint8_t regc;
+};
+
+struct sil164_priv {
+	//I2CDevRec d;
+	bool quiet;
+	struct sil164_save_rec save_regs;
+	struct sil164_save_rec mode_regs;
+};
+
+#define SILPTR(d) ((SIL164Ptr)(d->DriverPrivate.ptr))
+
+static bool sil164_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
+{
+	struct sil164_priv *sil = dvo->dev_priv;
+	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	u8 out_buf[2];
+	u8 in_buf[2];
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = i2cbus->slave_addr,
+			.flags = 0,
+			.len = 1,
+			.buf = out_buf,
+		},
+		{
+			.addr = i2cbus->slave_addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = in_buf,
+		}
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = 0;
+
+	if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) {
+		*ch = in_buf[0];
+		return true;
+	};
+
+	if (!sil->quiet) {
+		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
+			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+	}
+	return false;
+}
+
+static bool sil164_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
+{
+	struct sil164_priv *sil= dvo->dev_priv;
+	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	uint8_t out_buf[2];
+	struct i2c_msg msg = {
+		.addr = i2cbus->slave_addr,
+		.flags = 0,
+		.len = 2,
+		.buf = out_buf,
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = ch;
+
+	if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
+		return true;
+
+	if (!sil->quiet) {
+		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
+			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+	}
+
+	return false;
+}
+
+/* Silicon Image 164 driver for chip on i2c bus */
+static bool sil164_init(struct intel_dvo_device *dvo,
+			struct intel_i2c_chan *i2cbus)
+{
+	/* this will detect the SIL164 chip on the specified i2c bus */
+	struct sil164_priv *sil;
+	unsigned char ch;
+
+	sil = kzalloc(sizeof(struct sil164_priv), GFP_KERNEL);
+	if (sil == NULL)
+		return false;
+
+	dvo->i2c_bus = i2cbus;
+	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->dev_priv = sil;
+	sil->quiet = true;
+
+	if (!sil164_readb(dvo, SIL164_VID_LO, &ch))
+		goto out;
+
+	if (ch != (SIL164_VID & 0xff)) {
+		DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
+			  ch, i2cbus->adapter.name, i2cbus->slave_addr);
+		goto out;
+	}
+
+	if (!sil164_readb(dvo, SIL164_DID_LO, &ch))
+		goto out;
+
+	if (ch != (SIL164_DID & 0xff)) {
+		DRM_DEBUG("sil164 not detected got %d: from %s Slave %d.\n",
+			  ch, i2cbus->adapter.name, i2cbus->slave_addr);
+		goto out;
+	}
+	sil->quiet = false;
+
+	DRM_DEBUG("init sil164 dvo controller successfully!\n");
+	return true;
+
+out:
+	kfree(sil);
+	return false;
+}
+
+static enum drm_connector_status sil164_detect(struct intel_dvo_device *dvo)
+{
+	uint8_t reg9;
+
+	sil164_readb(dvo, SIL164_REG9, &reg9);
+
+	if (reg9 & SIL164_9_HTPLG)
+		return connector_status_connected;
+	else
+		return connector_status_disconnected;
+}
+
+static enum drm_mode_status sil164_mode_valid(struct intel_dvo_device *dvo,
+					      struct drm_display_mode *mode)
+{
+	return MODE_OK;
+}
+
+static void sil164_mode_set(struct intel_dvo_device *dvo,
+			    struct drm_display_mode *mode,
+			    struct drm_display_mode *adjusted_mode)
+{
+	/* As long as the basics are set up, since we don't have clock
+	 * dependencies in the mode setup, we can just leave the
+	 * registers alone and everything will work fine.
+	 */
+	/* recommended programming sequence from doc */
+	/*sil164_writeb(sil, 0x08, 0x30);
+	  sil164_writeb(sil, 0x09, 0x00);
+	  sil164_writeb(sil, 0x0a, 0x90);
+	  sil164_writeb(sil, 0x0c, 0x89);
+	  sil164_writeb(sil, 0x08, 0x31);*/
+	/* don't do much */
+	return;
+}
+
+/* set the SIL164 power state */
+static void sil164_dpms(struct intel_dvo_device *dvo, int mode)
+{
+	int ret;
+	unsigned char ch;
+
+	ret = sil164_readb(dvo, SIL164_REG8, &ch);
+	if (ret == false)
+		return;
+
+	if (mode == DRM_MODE_DPMS_ON)
+		ch |= SIL164_8_PD;
+	else
+		ch &= ~SIL164_8_PD;
+
+	sil164_writeb(dvo, SIL164_REG8, ch);
+	return;
+}
+
+static void sil164_dump_regs(struct intel_dvo_device *dvo)
+{
+	uint8_t val;
+
+	sil164_readb(dvo, SIL164_FREQ_LO, &val);
+	DRM_DEBUG("SIL164_FREQ_LO: 0x%02x\n", val);
+	sil164_readb(dvo, SIL164_FREQ_HI, &val);
+	DRM_DEBUG("SIL164_FREQ_HI: 0x%02x\n", val);
+	sil164_readb(dvo, SIL164_REG8, &val);
+	DRM_DEBUG("SIL164_REG8: 0x%02x\n", val);
+	sil164_readb(dvo, SIL164_REG9, &val);
+	DRM_DEBUG("SIL164_REG9: 0x%02x\n", val);
+	sil164_readb(dvo, SIL164_REGC, &val);
+	DRM_DEBUG("SIL164_REGC: 0x%02x\n", val);
+}
+
+static void sil164_save(struct intel_dvo_device *dvo)
+{
+	struct sil164_priv *sil= dvo->dev_priv;
+
+	if (!sil164_readb(dvo, SIL164_REG8, &sil->save_regs.reg8))
+		return;
+
+	if (!sil164_readb(dvo, SIL164_REG9, &sil->save_regs.reg9))
+		return;
+
+	if (!sil164_readb(dvo, SIL164_REGC, &sil->save_regs.regc))
+		return;
+
+	return;
+}
+
+static void sil164_restore(struct intel_dvo_device *dvo)
+{
+	struct sil164_priv *sil = dvo->dev_priv;
+
+	/* Restore it powered down initially */
+	sil164_writeb(dvo, SIL164_REG8, sil->save_regs.reg8 & ~0x1);
+
+	sil164_writeb(dvo, SIL164_REG9, sil->save_regs.reg9);
+	sil164_writeb(dvo, SIL164_REGC, sil->save_regs.regc);
+	sil164_writeb(dvo, SIL164_REG8, sil->save_regs.reg8);
+}
+
+static void sil164_destroy(struct intel_dvo_device *dvo)
+{
+	struct sil164_priv *sil = dvo->dev_priv;
+
+	if (sil) {
+		kfree(sil);
+		dvo->dev_priv = NULL;
+	}
+}
+
+struct intel_dvo_dev_ops sil164_ops = {
+	.init = sil164_init,
+	.detect = sil164_detect,
+	.mode_valid = sil164_mode_valid,
+	.mode_set = sil164_mode_set,
+	.dpms = sil164_dpms,
+	.dump_regs = sil164_dump_regs,
+	.save = sil164_save,
+	.restore = sil164_restore,
+	.destroy = sil164_destroy,
+};
diff --git a/drivers/gpu/drm/i915/dvo_tfp410.c b/drivers/gpu/drm/i915/dvo_tfp410.c
new file mode 100644
index 00000000000..207fda806eb
--- /dev/null
+++ b/drivers/gpu/drm/i915/dvo_tfp410.c
@@ -0,0 +1,335 @@
+/*
+ * Copyright © 2007 Dave Mueller
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Dave Mueller <dave.mueller@gmx.ch>
+ *
+ */
+
+#include "dvo.h"
+
+/* register definitions according to the TFP410 data sheet */
+#define TFP410_VID		0x014C
+#define TFP410_DID		0x0410
+
+#define TFP410_VID_LO		0x00
+#define TFP410_VID_HI		0x01
+#define TFP410_DID_LO		0x02
+#define TFP410_DID_HI		0x03
+#define TFP410_REV		0x04
+
+#define TFP410_CTL_1		0x08
+#define TFP410_CTL_1_TDIS	(1<<6)
+#define TFP410_CTL_1_VEN	(1<<5)
+#define TFP410_CTL_1_HEN	(1<<4)
+#define TFP410_CTL_1_DSEL	(1<<3)
+#define TFP410_CTL_1_BSEL	(1<<2)
+#define TFP410_CTL_1_EDGE	(1<<1)
+#define TFP410_CTL_1_PD		(1<<0)
+
+#define TFP410_CTL_2		0x09
+#define TFP410_CTL_2_VLOW	(1<<7)
+#define TFP410_CTL_2_MSEL_MASK	(0x7<<4)
+#define TFP410_CTL_2_MSEL	(1<<4)
+#define TFP410_CTL_2_TSEL	(1<<3)
+#define TFP410_CTL_2_RSEN	(1<<2)
+#define TFP410_CTL_2_HTPLG	(1<<1)
+#define TFP410_CTL_2_MDI	(1<<0)
+
+#define TFP410_CTL_3		0x0A
+#define TFP410_CTL_3_DK_MASK 	(0x7<<5)
+#define TFP410_CTL_3_DK		(1<<5)
+#define TFP410_CTL_3_DKEN	(1<<4)
+#define TFP410_CTL_3_CTL_MASK	(0x7<<1)
+#define TFP410_CTL_3_CTL	(1<<1)
+
+#define TFP410_USERCFG		0x0B
+
+#define TFP410_DE_DLY		0x32
+
+#define TFP410_DE_CTL		0x33
+#define TFP410_DE_CTL_DEGEN	(1<<6)
+#define TFP410_DE_CTL_VSPOL	(1<<5)
+#define TFP410_DE_CTL_HSPOL	(1<<4)
+#define TFP410_DE_CTL_DEDLY8	(1<<0)
+
+#define TFP410_DE_TOP		0x34
+
+#define TFP410_DE_CNT_LO	0x36
+#define TFP410_DE_CNT_HI	0x37
+
+#define TFP410_DE_LIN_LO	0x38
+#define TFP410_DE_LIN_HI	0x39
+
+#define TFP410_H_RES_LO		0x3A
+#define TFP410_H_RES_HI		0x3B
+
+#define TFP410_V_RES_LO		0x3C
+#define TFP410_V_RES_HI		0x3D
+
+struct tfp410_save_rec {
+	uint8_t ctl1;
+	uint8_t ctl2;
+};
+
+struct tfp410_priv {
+	bool quiet;
+
+	struct tfp410_save_rec saved_reg;
+	struct tfp410_save_rec mode_reg;
+};
+
+static bool tfp410_readb(struct intel_dvo_device *dvo, int addr, uint8_t *ch)
+{
+	struct tfp410_priv *tfp = dvo->dev_priv;
+	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	u8 out_buf[2];
+	u8 in_buf[2];
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = i2cbus->slave_addr,
+			.flags = 0,
+			.len = 1,
+			.buf = out_buf,
+		},
+		{
+			.addr = i2cbus->slave_addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = in_buf,
+		}
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = 0;
+
+	if (i2c_transfer(&i2cbus->adapter, msgs, 2) == 2) {
+		*ch = in_buf[0];
+		return true;
+	};
+
+	if (!tfp->quiet) {
+		DRM_DEBUG("Unable to read register 0x%02x from %s:%02x.\n",
+			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+	}
+	return false;
+}
+
+static bool tfp410_writeb(struct intel_dvo_device *dvo, int addr, uint8_t ch)
+{
+	struct tfp410_priv *tfp = dvo->dev_priv;
+	struct intel_i2c_chan *i2cbus = dvo->i2c_bus;
+	uint8_t out_buf[2];
+	struct i2c_msg msg = {
+		.addr = i2cbus->slave_addr,
+		.flags = 0,
+		.len = 2,
+		.buf = out_buf,
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = ch;
+
+	if (i2c_transfer(&i2cbus->adapter, &msg, 1) == 1)
+		return true;
+
+	if (!tfp->quiet) {
+		DRM_DEBUG("Unable to write register 0x%02x to %s:%d.\n",
+			  addr, i2cbus->adapter.name, i2cbus->slave_addr);
+	}
+
+	return false;
+}
+
+static int tfp410_getid(struct intel_dvo_device *dvo, int addr)
+{
+	uint8_t ch1, ch2;
+
+	if (tfp410_readb(dvo, addr+0, &ch1) &&
+	    tfp410_readb(dvo, addr+1, &ch2))
+		return ((ch2 << 8) & 0xFF00) | (ch1 & 0x00FF);
+
+	return -1;
+}
+
+/* Ti TFP410 driver for chip on i2c bus */
+static bool tfp410_init(struct intel_dvo_device *dvo,
+			struct intel_i2c_chan *i2cbus)
+{
+	/* this will detect the tfp410 chip on the specified i2c bus */
+	struct tfp410_priv *tfp;
+	int id;
+
+	tfp = kzalloc(sizeof(struct tfp410_priv), GFP_KERNEL);
+	if (tfp == NULL)
+		return false;
+
+	dvo->i2c_bus = i2cbus;
+	dvo->i2c_bus->slave_addr = dvo->slave_addr;
+	dvo->dev_priv = tfp;
+	tfp->quiet = true;
+
+	if ((id = tfp410_getid(dvo, TFP410_VID_LO)) != TFP410_VID) {
+		DRM_DEBUG("tfp410 not detected got VID %X: from %s Slave %d.\n",
+			  id, i2cbus->adapter.name, i2cbus->slave_addr);
+		goto out;
+	}
+
+	if ((id = tfp410_getid(dvo, TFP410_DID_LO)) != TFP410_DID) {
+		DRM_DEBUG("tfp410 not detected got DID %X: from %s Slave %d.\n",
+			  id, i2cbus->adapter.name, i2cbus->slave_addr);
+		goto out;
+	}
+	tfp->quiet = false;
+	return true;
+out:
+	kfree(tfp);
+	return false;
+}
+
+static enum drm_connector_status tfp410_detect(struct intel_dvo_device *dvo)
+{
+	enum drm_connector_status ret = connector_status_disconnected;
+	uint8_t ctl2;
+
+	if (tfp410_readb(dvo, TFP410_CTL_2, &ctl2)) {
+		if (ctl2 & TFP410_CTL_2_HTPLG)
+			ret = connector_status_connected;
+		else
+			ret = connector_status_disconnected;
+	}
+
+	return ret;
+}
+
+static enum drm_mode_status tfp410_mode_valid(struct intel_dvo_device *dvo,
+					      struct drm_display_mode *mode)
+{
+	return MODE_OK;
+}
+
+static void tfp410_mode_set(struct intel_dvo_device *dvo,
+			    struct drm_display_mode *mode,
+			    struct drm_display_mode *adjusted_mode)
+{
+    /* As long as the basics are set up, since we don't have clock dependencies
+     * in the mode setup, we can just leave the registers alone and everything
+     * will work fine.
+     */
+    /* don't do much */
+    return;
+}
+
+/* set the tfp410 power state */
+static void tfp410_dpms(struct intel_dvo_device *dvo, int mode)
+{
+	uint8_t ctl1;
+
+	if (!tfp410_readb(dvo, TFP410_CTL_1, &ctl1))
+		return;
+
+	if (mode == DRM_MODE_DPMS_ON)
+		ctl1 |= TFP410_CTL_1_PD;
+	else
+		ctl1 &= ~TFP410_CTL_1_PD;
+
+	tfp410_writeb(dvo, TFP410_CTL_1, ctl1);
+}
+
+static void tfp410_dump_regs(struct intel_dvo_device *dvo)
+{
+	uint8_t val, val2;
+
+	tfp410_readb(dvo, TFP410_REV, &val);
+	DRM_DEBUG("TFP410_REV: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_CTL_1, &val);
+	DRM_DEBUG("TFP410_CTL1: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_CTL_2, &val);
+	DRM_DEBUG("TFP410_CTL2: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_CTL_3, &val);
+	DRM_DEBUG("TFP410_CTL3: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_USERCFG, &val);
+	DRM_DEBUG("TFP410_USERCFG: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_DE_DLY, &val);
+	DRM_DEBUG("TFP410_DE_DLY: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_DE_CTL, &val);
+	DRM_DEBUG("TFP410_DE_CTL: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_DE_TOP, &val);
+	DRM_DEBUG("TFP410_DE_TOP: 0x%02X\n", val);
+	tfp410_readb(dvo, TFP410_DE_CNT_LO, &val);
+	tfp410_readb(dvo, TFP410_DE_CNT_HI, &val2);
+	DRM_DEBUG("TFP410_DE_CNT: 0x%02X%02X\n", val2, val);
+	tfp410_readb(dvo, TFP410_DE_LIN_LO, &val);
+	tfp410_readb(dvo, TFP410_DE_LIN_HI, &val2);
+	DRM_DEBUG("TFP410_DE_LIN: 0x%02X%02X\n", val2, val);
+	tfp410_readb(dvo, TFP410_H_RES_LO, &val);
+	tfp410_readb(dvo, TFP410_H_RES_HI, &val2);
+	DRM_DEBUG("TFP410_H_RES: 0x%02X%02X\n", val2, val);
+	tfp410_readb(dvo, TFP410_V_RES_LO, &val);
+	tfp410_readb(dvo, TFP410_V_RES_HI, &val2);
+	DRM_DEBUG("TFP410_V_RES: 0x%02X%02X\n", val2, val);
+}
+
+static void tfp410_save(struct intel_dvo_device *dvo)
+{
+	struct tfp410_priv *tfp = dvo->dev_priv;
+
+	if (!tfp410_readb(dvo, TFP410_CTL_1, &tfp->saved_reg.ctl1))
+		return;
+
+	if (!tfp410_readb(dvo, TFP410_CTL_2, &tfp->saved_reg.ctl2))
+		return;
+}
+
+static void tfp410_restore(struct intel_dvo_device *dvo)
+{
+	struct tfp410_priv *tfp = dvo->dev_priv;
+
+	/* Restore it powered down initially */
+	tfp410_writeb(dvo, TFP410_CTL_1, tfp->saved_reg.ctl1 & ~0x1);
+
+	tfp410_writeb(dvo, TFP410_CTL_2, tfp->saved_reg.ctl2);
+	tfp410_writeb(dvo, TFP410_CTL_1, tfp->saved_reg.ctl1);
+}
+
+static void tfp410_destroy(struct intel_dvo_device *dvo)
+{
+	struct tfp410_priv *tfp = dvo->dev_priv;
+
+	if (tfp) {
+		kfree(tfp);
+		dvo->dev_priv = NULL;
+	}
+}
+
+struct intel_dvo_dev_ops tfp410_ops = {
+	.init = tfp410_init,
+	.detect = tfp410_detect,
+	.mode_valid = tfp410_mode_valid,
+	.mode_set = tfp410_mode_set,
+	.dpms = tfp410_dpms,
+	.dump_regs = tfp410_dump_regs,
+	.save = tfp410_save,
+	.restore = tfp410_restore,
+	.destroy = tfp410_destroy,
+};
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 1b81b6a6d81..b5d0809eecb 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -28,6 +28,8 @@
 
 #include "drmP.h"
 #include "drm.h"
+#include "drm_crtc_helper.h"
+#include "intel_drv.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
 
@@ -125,6 +127,13 @@ void i915_kernel_lost_context(struct drm_device * dev)
 	struct drm_i915_master_private *master_priv;
 	drm_i915_ring_buffer_t *ring = &(dev_priv->ring);
 
+	/*
+	 * We should never lose context on the ring with modesetting
+	 * as we don't expose it to userspace
+	 */
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		return;
+
 	ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
 	ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
 	ring->space = ring->head - (ring->tail + 8);
@@ -769,6 +778,11 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 		return -EINVAL;
 	}
 
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		WARN(1, "tried to set status page when mode setting active\n");
+		return 0;
+	}
+
 	printk(KERN_DEBUG "set status page addr 0x%08x\n", (u32)hws->addr);
 
 	dev_priv->status_gfx_addr = hws->addr & (0x1ffff<<12);
@@ -797,6 +811,173 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 	return 0;
 }
 
+/**
+ * i915_probe_agp - get AGP bootup configuration
+ * @pdev: PCI device
+ * @aperture_size: returns AGP aperture configured size
+ * @preallocated_size: returns size of BIOS preallocated AGP space
+ *
+ * Since Intel integrated graphics are UMA, the BIOS has to set aside
+ * some RAM for the framebuffer at early boot.  This code figures out
+ * how much was set aside so we can use it for our own purposes.
+ */
+int i915_probe_agp(struct pci_dev *pdev, unsigned long *aperture_size,
+		   unsigned long *preallocated_size)
+{
+	struct pci_dev *bridge_dev;
+	u16 tmp = 0;
+	unsigned long overhead;
+
+	bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+	if (!bridge_dev) {
+		DRM_ERROR("bridge device not found\n");
+		return -1;
+	}
+
+	/* Get the fb aperture size and "stolen" memory amount. */
+	pci_read_config_word(bridge_dev, INTEL_GMCH_CTRL, &tmp);
+	pci_dev_put(bridge_dev);
+
+	*aperture_size = 1024 * 1024;
+	*preallocated_size = 1024 * 1024;
+
+	switch (pdev->device) {
+	case PCI_DEVICE_ID_INTEL_82830_CGC:
+	case PCI_DEVICE_ID_INTEL_82845G_IG:
+	case PCI_DEVICE_ID_INTEL_82855GM_IG:
+	case PCI_DEVICE_ID_INTEL_82865_IG:
+		if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
+			*aperture_size *= 64;
+		else
+			*aperture_size *= 128;
+		break;
+	default:
+		/* 9xx supports large sizes, just look at the length */
+		*aperture_size = pci_resource_len(pdev, 2);
+		break;
+	}
+
+	/*
+	 * Some of the preallocated space is taken by the GTT
+	 * and popup.  GTT is 1K per MB of aperture size, and popup is 4K.
+	 */
+	overhead = (*aperture_size / 1024) + 4096;
+	switch (tmp & INTEL_855_GMCH_GMS_MASK) {
+	case INTEL_855_GMCH_GMS_STOLEN_1M:
+		break; /* 1M already */
+	case INTEL_855_GMCH_GMS_STOLEN_4M:
+		*preallocated_size *= 4;
+		break;
+	case INTEL_855_GMCH_GMS_STOLEN_8M:
+		*preallocated_size *= 8;
+		break;
+	case INTEL_855_GMCH_GMS_STOLEN_16M:
+		*preallocated_size *= 16;
+		break;
+	case INTEL_855_GMCH_GMS_STOLEN_32M:
+		*preallocated_size *= 32;
+		break;
+	case INTEL_915G_GMCH_GMS_STOLEN_48M:
+		*preallocated_size *= 48;
+		break;
+	case INTEL_915G_GMCH_GMS_STOLEN_64M:
+		*preallocated_size *= 64;
+		break;
+	case INTEL_855_GMCH_GMS_DISABLED:
+		DRM_ERROR("video memory is disabled\n");
+		return -1;
+	default:
+		DRM_ERROR("unexpected GMCH_GMS value: 0x%02x\n",
+			tmp & INTEL_855_GMCH_GMS_MASK);
+		return -1;
+	}
+	*preallocated_size -= overhead;
+
+	return 0;
+}
+
+static int i915_load_modeset_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long agp_size, prealloc_size;
+	int fb_bar = IS_I9XX(dev) ? 2 : 0;
+	int ret = 0;
+
+	dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
+		0xff000000;
+
+	DRM_DEBUG("*** fb base 0x%08lx\n", dev->mode_config.fb_base);
+
+	if (IS_MOBILE(dev) || (IS_I9XX(dev) && !IS_I965G(dev) && !IS_G33(dev)))
+		dev_priv->cursor_needs_physical = true;
+	else
+		dev_priv->cursor_needs_physical = false;
+
+	i915_probe_agp(dev->pdev, &agp_size, &prealloc_size);
+
+	/* Basic memrange allocator for stolen space (aka vram) */
+	drm_mm_init(&dev_priv->vram, 0, prealloc_size);
+
+	/* Let GEM Manage from end of prealloc space to end of aperture */
+	i915_gem_do_init(dev, prealloc_size, agp_size);
+
+	ret = i915_gem_init_ringbuffer(dev);
+	if (ret)
+		goto out;
+
+        dev_priv->mm.gtt_mapping =
+		io_mapping_create_wc(dev->agp->base,
+				     dev->agp->agp_info.aper_size * 1024*1024);
+
+	/* Allow hardware batchbuffers unless told otherwise.
+	 */
+	dev_priv->allow_batchbuffer = 1;
+
+	ret = intel_init_bios(dev);
+	if (ret)
+		DRM_INFO("failed to find VBIOS tables\n");
+
+	ret = drm_irq_install(dev);
+	if (ret)
+		goto destroy_ringbuffer;
+
+	/* FIXME: re-add hotplug support */
+#if 0
+	ret = drm_hotplug_init(dev);
+	if (ret)
+		goto destroy_ringbuffer;
+#endif
+
+	/* Always safe in the mode setting case. */
+	/* FIXME: do pre/post-mode set stuff in core KMS code */
+	dev->vblank_disable_allowed = 1;
+
+	/*
+	 * Initialize the hardware status page IRQ location.
+	 */
+
+	I915_WRITE(INSTPM, (1 << 5) | (1 << 21));
+
+	intel_modeset_init(dev);
+
+	drm_helper_initial_config(dev, false);
+
+	dev->devname = kstrdup(DRIVER_NAME, GFP_KERNEL);
+	if (!dev->devname) {
+		ret = -ENOMEM;
+		goto modeset_cleanup;
+	}
+
+	return 0;
+
+modeset_cleanup:
+	intel_modeset_cleanup(dev);
+destroy_ringbuffer:
+	i915_gem_cleanup_ringbuffer(dev);
+out:
+	return ret;
+}
+
 int i915_master_create(struct drm_device *dev, struct drm_master *master)
 {
 	struct drm_i915_master_private *master_priv;
@@ -821,6 +1002,25 @@ void i915_master_destroy(struct drm_device *dev, struct drm_master *master)
 	master->driver_priv = NULL;
 }
 
+
+int i915_driver_firstopen(struct drm_device *dev)
+{
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		return 0;
+	return 0;
+}
+
+/**
+ * i915_driver_load - setup chip and create an initial config
+ * @dev: DRM device
+ * @flags: startup flags
+ *
+ * The driver load routine has to do several things:
+ *   - drive output discovery via intel_modeset_init()
+ *   - initialize the memory manager
+ *   - allocate initial config memory
+ *   - setup the DRM framebuffer with the allocated memory
+ */
 int i915_driver_load(struct drm_device *dev, unsigned long flags)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -848,6 +1048,11 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	size = drm_get_resource_len(dev, mmio_bar);
 
 	dev_priv->regs = ioremap(base, size);
+	if (!dev_priv->regs) {
+		DRM_ERROR("failed to map registers\n");
+		ret = -EIO;
+		goto free_priv;
+	}
 
 #ifdef CONFIG_HIGHMEM64G
 	/* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */
@@ -863,7 +1068,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	if (!I915_NEED_GFX_HWS(dev)) {
 		ret = i915_init_phys_hws(dev);
 		if (ret != 0)
-			return ret;
+			goto out_rmmap;
 	}
 
 	/* On the 945G/GM, the chipset reports the MSI capability on the
@@ -883,6 +1088,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	intel_opregion_init(dev);
 
 	spin_lock_init(&dev_priv->user_irq_lock);
+	dev_priv->user_irq_refcount = 0;
 
 	ret = drm_vblank_init(dev, I915_NUM_PIPE);
 
@@ -891,6 +1097,20 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 		return ret;
 	}
 
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		ret = i915_load_modeset_init(dev);
+		if (ret < 0) {
+			DRM_ERROR("failed to init modeset\n");
+			goto out_rmmap;
+		}
+	}
+
+	return 0;
+
+out_rmmap:
+	iounmap(dev_priv->regs);
+free_priv:
+	drm_free(dev_priv, sizeof(struct drm_i915_private), DRM_MEM_DRIVER);
 	return ret;
 }
 
@@ -898,16 +1118,29 @@ int i915_driver_unload(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		io_mapping_free(dev_priv->mm.gtt_mapping);
+		drm_irq_uninstall(dev);
+	}
+
 	if (dev->pdev->msi_enabled)
 		pci_disable_msi(dev->pdev);
 
-	i915_free_hws(dev);
-
 	if (dev_priv->regs != NULL)
 		iounmap(dev_priv->regs);
 
 	intel_opregion_free(dev);
 
+	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+		intel_modeset_cleanup(dev);
+
+		mutex_lock(&dev->struct_mutex);
+		i915_gem_cleanup_ringbuffer(dev);
+		mutex_unlock(&dev->struct_mutex);
+		drm_mm_takedown(&dev_priv->vram);
+		i915_gem_lastclose(dev);
+	}
+
 	drm_free(dev->dev_private, sizeof(drm_i915_private_t),
 		 DRM_MEM_DRIVER);
 
@@ -933,12 +1166,26 @@ int i915_driver_open(struct drm_device *dev, struct drm_file *file_priv)
 	return 0;
 }
 
+/**
+ * i915_driver_lastclose - clean up after all DRM clients have exited
+ * @dev: DRM device
+ *
+ * Take care of cleaning up after all DRM clients have exited.  In the
+ * mode setting case, we want to restore the kernel's initial mode (just
+ * in case the last client left us in a bad state).
+ *
+ * Additionally, in the non-mode setting case, we'll tear down the AGP
+ * and DMA structures, since the kernel won't be using them, and clea
+ * up any GEM state.
+ */
 void i915_driver_lastclose(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 
-	if (!dev_priv)
+	if (!dev_priv || drm_core_check_feature(dev, DRIVER_MODESET)) {
+		intelfb_restore();
 		return;
+	}
 
 	i915_gem_lastclose(dev);
 
@@ -951,7 +1198,8 @@ void i915_driver_lastclose(struct drm_device * dev)
 void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	i915_mem_release(dev, file_priv, dev_priv->agp_heap);
+	if (!drm_core_check_feature(dev, DRIVER_MODESET))
+		i915_mem_release(dev, file_priv, dev_priv->agp_heap);
 }
 
 void i915_driver_postclose(struct drm_device *dev, struct drm_file *file_priv)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index e0d996ed902..cbee41c3241 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -33,11 +33,22 @@
 #include "i915_drv.h"
 
 #include "drm_pciids.h"
+#include <linux/console.h>
+
+unsigned int i915_modeset = -1;
+module_param_named(modeset, i915_modeset, int, 0400);
+
+unsigned int i915_fbpercrtc = 0;
+module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
 
 static struct pci_device_id pciidlist[] = {
 	i915_PCI_IDS
 };
 
+#if defined(CONFIG_DRM_I915_KMS)
+MODULE_DEVICE_TABLE(pci, pciidlist);
+#endif
+
 static int i915_suspend(struct drm_device *dev, pm_message_t state)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -148,6 +159,28 @@ static struct drm_driver driver = {
 static int __init i915_init(void)
 {
 	driver.num_ioctls = i915_max_ioctl;
+
+	/*
+	 * If CONFIG_DRM_I915_KMS is set, default to KMS unless
+	 * explicitly disabled with the module pararmeter.
+	 *
+	 * Otherwise, just follow the parameter (defaulting to off).
+	 *
+	 * Allow optional vga_text_mode_force boot option to override
+	 * the default behavior.
+	 */
+#if defined(CONFIG_DRM_I915_KMS)
+	if (i915_modeset != 0)
+		driver.driver_features |= DRIVER_MODESET;
+#endif
+	if (i915_modeset == 1)
+		driver.driver_features |= DRIVER_MODESET;
+
+#ifdef CONFIG_VGA_CONSOLE
+	if (vgacon_text_force() && i915_modeset == -1)
+		driver.driver_features &= ~DRIVER_MODESET;
+#endif
+
 	return drm_init(&driver);
 }
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 85a072e8063..6f18ee68d06 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -31,6 +31,7 @@
 #define _I915_DRV_H_
 
 #include "i915_reg.h"
+#include "intel_bios.h"
 #include <linux/io-mapping.h>
 
 /* General customization:
@@ -152,8 +153,26 @@ typedef struct drm_i915_private {
 	unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
 	int vblank_pipe;
 
+	bool cursor_needs_physical;
+
+	struct drm_mm vram;
+
+	int irq_enabled;
+
 	struct intel_opregion opregion;
 
+	/* LVDS info */
+	int backlight_duty_cycle;  /* restore backlight to this value */
+	bool panel_wants_dither;
+	struct drm_display_mode *panel_fixed_mode;
+	struct drm_display_mode *vbt_mode; /* if any */
+
+	/* Feature bits from the VBIOS */
+	int int_tv_support:1;
+	int lvds_dither:1;
+	int lvds_vbt:1;
+	int int_crt_support:1;
+
 	struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
 	int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
 	int num_fence_regs; /* 8 on pre-965, 16 otherwise */
@@ -413,6 +432,10 @@ struct drm_i915_gem_object {
 	 * flags which individual pages are valid.
 	 */
 	uint8_t *page_cpu_valid;
+
+	/** User space pin count and filp owning the pin */
+	uint32_t user_pin_count;
+	struct drm_file *pin_filp;
 };
 
 /**
@@ -442,8 +465,16 @@ struct drm_i915_file_private {
 	} mm;
 };
 
+enum intel_chip_family {
+	CHIP_I8XX = 0x01,
+	CHIP_I9XX = 0x02,
+	CHIP_I915 = 0x04,
+	CHIP_I965 = 0x08,
+};
+
 extern struct drm_ioctl_desc i915_ioctls[];
 extern int i915_max_ioctl;
+extern unsigned int i915_fbpercrtc;
 
 extern int i915_master_create(struct drm_device *dev, struct drm_master *master);
 extern void i915_master_destroy(struct drm_device *dev, struct drm_master *master);
@@ -472,6 +503,7 @@ extern int i915_irq_wait(struct drm_device *dev, void *data,
 			 struct drm_file *file_priv);
 void i915_user_irq_get(struct drm_device *dev);
 void i915_user_irq_put(struct drm_device *dev);
+extern void i915_enable_interrupt (struct drm_device *dev);
 
 extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS);
 extern void i915_driver_irq_preinstall(struct drm_device * dev);
@@ -556,7 +588,16 @@ uint32_t i915_get_gem_seqno(struct drm_device *dev);
 void i915_gem_retire_requests(struct drm_device *dev);
 void i915_gem_retire_work_handler(struct work_struct *work);
 void i915_gem_clflush_object(struct drm_gem_object *obj);
+int i915_gem_object_set_domain(struct drm_gem_object *obj,
+			       uint32_t read_domains,
+			       uint32_t write_domain);
+int i915_gem_init_ringbuffer(struct drm_device *dev);
+void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
+int i915_gem_do_init(struct drm_device *dev, unsigned long start,
+		     unsigned long end);
 int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
+int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
+				      int write);
 
 /* i915_gem_tiling.c */
 void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
@@ -595,6 +636,10 @@ static inline void opregion_asle_intr(struct drm_device *dev) { return; }
 static inline void opregion_enable_asle(struct drm_device *dev) { return; }
 #endif
 
+/* modesetting */
+extern void intel_modeset_init(struct drm_device *dev);
+extern void intel_modeset_cleanup(struct drm_device *dev);
+
 /**
  * Lock test for when it's just for synchronization of ring access.
  *
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 0ac977112f7..c4ccaf3b3c7 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -30,6 +30,7 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 #include <linux/swap.h>
+#include <linux/pci.h>
 
 #define I915_GEM_GPU_DOMAINS	(~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
 
@@ -40,8 +41,6 @@ i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
 static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
 static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
 static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
-static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
-					     int write);
 static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj,
 					     int write);
 static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
@@ -57,33 +56,37 @@ static void i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
 static void i915_gem_clear_fence_reg(struct drm_gem_object *obj);
 static int i915_gem_evict_something(struct drm_device *dev);
 
-static void
-i915_gem_cleanup_ringbuffer(struct drm_device *dev);
-
-int
-i915_gem_init_ioctl(struct drm_device *dev, void *data,
-		    struct drm_file *file_priv)
+int i915_gem_do_init(struct drm_device *dev, unsigned long start,
+		     unsigned long end)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	struct drm_i915_gem_init *args = data;
-
-	mutex_lock(&dev->struct_mutex);
 
-	if (args->gtt_start >= args->gtt_end ||
-	    (args->gtt_start & (PAGE_SIZE - 1)) != 0 ||
-	    (args->gtt_end & (PAGE_SIZE - 1)) != 0) {
-		mutex_unlock(&dev->struct_mutex);
+	if (start >= end ||
+	    (start & (PAGE_SIZE - 1)) != 0 ||
+	    (end & (PAGE_SIZE - 1)) != 0) {
 		return -EINVAL;
 	}
 
-	drm_mm_init(&dev_priv->mm.gtt_space, args->gtt_start,
-	    args->gtt_end - args->gtt_start);
+	drm_mm_init(&dev_priv->mm.gtt_space, start,
+		    end - start);
 
-	dev->gtt_total = (uint32_t) (args->gtt_end - args->gtt_start);
+	dev->gtt_total = (uint32_t) (end - start);
+
+	return 0;
+}
 
+int
+i915_gem_init_ioctl(struct drm_device *dev, void *data,
+		    struct drm_file *file_priv)
+{
+	struct drm_i915_gem_init *args = data;
+	int ret;
+
+	mutex_lock(&dev->struct_mutex);
+	ret = i915_gem_do_init(dev, args->gtt_start, args->gtt_end);
 	mutex_unlock(&dev->struct_mutex);
 
-	return 0;
+	return ret;
 }
 
 int
@@ -1246,7 +1249,8 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
 
 	/* blow away mappings if mapped through GTT */
 	offset = ((loff_t) obj->map_list.hash.key) << PAGE_SHIFT;
-	unmap_mapping_range(dev->dev_mapping, offset, obj->size, 1);
+	if (dev->dev_mapping)
+		unmap_mapping_range(dev->dev_mapping, offset, obj->size, 1);
 
 	if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
 		i915_gem_clear_fence_reg(obj);
@@ -1508,7 +1512,7 @@ static void
 i915_gem_object_get_fence_reg(struct drm_gem_object *obj)
 {
 	struct drm_device *dev = obj->dev;
-	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 	struct drm_i915_fence_reg *reg = NULL;
 	int i, ret;
@@ -1567,8 +1571,9 @@ try_again:
 		 * for this object next time we need it.
 		 */
 		offset = ((loff_t) reg->obj->map_list.hash.key) << PAGE_SHIFT;
-		unmap_mapping_range(dev->dev_mapping, offset,
-				    reg->obj->size, 1);
+		if (dev->dev_mapping)
+			unmap_mapping_range(dev->dev_mapping, offset,
+					    reg->obj->size, 1);
 		old_obj_priv->fence_reg = I915_FENCE_REG_NONE;
 	}
 
@@ -1594,7 +1599,7 @@ static void
 i915_gem_clear_fence_reg(struct drm_gem_object *obj)
 {
 	struct drm_device *dev = obj->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
+	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 
 	if (IS_I965G(dev))
@@ -1764,7 +1769,7 @@ i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj)
  * This function returns when the move is complete, including waiting on
  * flushes to occur.
  */
-static int
+int
 i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write)
 {
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
@@ -2706,11 +2711,22 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data,
 	}
 	obj_priv = obj->driver_private;
 
-	ret = i915_gem_object_pin(obj, args->alignment);
-	if (ret != 0) {
-		drm_gem_object_unreference(obj);
+	if (obj_priv->pin_filp != NULL && obj_priv->pin_filp != file_priv) {
+		DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n",
+			  args->handle);
 		mutex_unlock(&dev->struct_mutex);
-		return ret;
+		return -EINVAL;
+	}
+
+	obj_priv->user_pin_count++;
+	obj_priv->pin_filp = file_priv;
+	if (obj_priv->user_pin_count == 1) {
+		ret = i915_gem_object_pin(obj, args->alignment);
+		if (ret != 0) {
+			drm_gem_object_unreference(obj);
+			mutex_unlock(&dev->struct_mutex);
+			return ret;
+		}
 	}
 
 	/* XXX - flush the CPU caches for pinned objects
@@ -2730,6 +2746,7 @@ i915_gem_unpin_ioctl(struct drm_device *dev, void *data,
 {
 	struct drm_i915_gem_pin *args = data;
 	struct drm_gem_object *obj;
+	struct drm_i915_gem_object *obj_priv;
 
 	mutex_lock(&dev->struct_mutex);
 
@@ -2741,7 +2758,19 @@ i915_gem_unpin_ioctl(struct drm_device *dev, void *data,
 		return -EBADF;
 	}
 
-	i915_gem_object_unpin(obj);
+	obj_priv = obj->driver_private;
+	if (obj_priv->pin_filp != file_priv) {
+		DRM_ERROR("Not pinned by caller in i915_gem_pin_ioctl(): %d\n",
+			  args->handle);
+		drm_gem_object_unreference(obj);
+		mutex_unlock(&dev->struct_mutex);
+		return -EINVAL;
+	}
+	obj_priv->user_pin_count--;
+	if (obj_priv->user_pin_count == 0) {
+		obj_priv->pin_filp = NULL;
+		i915_gem_object_unpin(obj);
+	}
 
 	drm_gem_object_unreference(obj);
 	mutex_unlock(&dev->struct_mutex);
@@ -3036,12 +3065,13 @@ i915_gem_init_hws(struct drm_device *dev)
 	return 0;
 }
 
-static int
+int
 i915_gem_init_ringbuffer(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_gem_object *obj;
 	struct drm_i915_gem_object *obj_priv;
+	drm_i915_ring_buffer_t *ring = &dev_priv->ring;
 	int ret;
 	u32 head;
 
@@ -3063,24 +3093,24 @@ i915_gem_init_ringbuffer(struct drm_device *dev)
 	}
 
 	/* Set up the kernel mapping for the ring. */
-	dev_priv->ring.Size = obj->size;
-	dev_priv->ring.tail_mask = obj->size - 1;
+	ring->Size = obj->size;
+	ring->tail_mask = obj->size - 1;
 
-	dev_priv->ring.map.offset = dev->agp->base + obj_priv->gtt_offset;
-	dev_priv->ring.map.size = obj->size;
-	dev_priv->ring.map.type = 0;
-	dev_priv->ring.map.flags = 0;
-	dev_priv->ring.map.mtrr = 0;
+	ring->map.offset = dev->agp->base + obj_priv->gtt_offset;
+	ring->map.size = obj->size;
+	ring->map.type = 0;
+	ring->map.flags = 0;
+	ring->map.mtrr = 0;
 
-	drm_core_ioremap_wc(&dev_priv->ring.map, dev);
-	if (dev_priv->ring.map.handle == NULL) {
+	drm_core_ioremap_wc(&ring->map, dev);
+	if (ring->map.handle == NULL) {
 		DRM_ERROR("Failed to map ringbuffer.\n");
 		memset(&dev_priv->ring, 0, sizeof(dev_priv->ring));
 		drm_gem_object_unreference(obj);
 		return -EINVAL;
 	}
-	dev_priv->ring.ring_obj = obj;
-	dev_priv->ring.virtual_start = dev_priv->ring.map.handle;
+	ring->ring_obj = obj;
+	ring->virtual_start = ring->map.handle;
 
 	/* Stop the ring if it's running. */
 	I915_WRITE(PRB0_CTL, 0);
@@ -3128,12 +3158,20 @@ i915_gem_init_ringbuffer(struct drm_device *dev)
 	}
 
 	/* Update our cache of the ring state */
-	i915_kernel_lost_context(dev);
+	if (!drm_core_check_feature(dev, DRIVER_MODESET))
+		i915_kernel_lost_context(dev);
+	else {
+		ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
+		ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
+		ring->space = ring->head - (ring->tail + 8);
+		if (ring->space < 0)
+			ring->space += ring->Size;
+	}
 
 	return 0;
 }
 
-static void
+void
 i915_gem_cleanup_ringbuffer(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
@@ -3171,6 +3209,9 @@ i915_gem_entervt_ioctl(struct drm_device *dev, void *data,
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	int ret;
 
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		return 0;
+
 	if (dev_priv->mm.wedged) {
 		DRM_ERROR("Reenabling wedged hardware, good luck\n");
 		dev_priv->mm.wedged = 0;
@@ -3204,6 +3245,9 @@ i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	int ret;
 
+	if (drm_core_check_feature(dev, DRIVER_MODESET))
+		return 0;
+
 	ret = i915_gem_idle(dev);
 	drm_irq_uninstall(dev);
 
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 9b673d2f912..0cadafbef41 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -30,6 +30,7 @@
 #include "drm.h"
 #include "i915_drm.h"
 #include "i915_drv.h"
+#include "intel_drv.h"
 
 #define MAX_NOPID ((u32)~0)
 
@@ -51,6 +52,15 @@
 #define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \
 				    I915_INTERRUPT_ENABLE_VAR)
 
+#define I915_PIPE_VBLANK_STATUS	(PIPE_START_VBLANK_INTERRUPT_STATUS |\
+				 PIPE_VBLANK_INTERRUPT_STATUS)
+
+#define I915_PIPE_VBLANK_ENABLE	(PIPE_START_VBLANK_INTERRUPT_ENABLE |\
+				 PIPE_VBLANK_INTERRUPT_ENABLE)
+
+#define DRM_I915_VBLANK_PIPE_ALL	(DRM_I915_VBLANK_PIPE_A | \
+					 DRM_I915_VBLANK_PIPE_B)
+
 void
 i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
 {
@@ -201,6 +211,7 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 		spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
 		pipea_stats = I915_READ(PIPEASTAT);
 		pipeb_stats = I915_READ(PIPEBSTAT);
+
 		/*
 		 * Clear the PIPE(A|B)STAT regs before the IIR
 		 */
@@ -427,6 +438,14 @@ void i915_disable_vblank(struct drm_device *dev, int pipe)
 	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
 }
 
+void i915_enable_interrupt (struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	opregion_enable_asle(dev);
+	dev_priv->irq_enabled = 1;
+}
+
+
 /* Set the vblank monitor pipe
  */
 int i915_vblank_pipe_set(struct drm_device *dev, void *data,
@@ -487,6 +506,8 @@ void i915_driver_irq_preinstall(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 
+	atomic_set(&dev_priv->irq_received, 0);
+
 	I915_WRITE(HWSTAM, 0xeffe);
 	I915_WRITE(PIPEASTAT, 0);
 	I915_WRITE(PIPEBSTAT, 0);
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
new file mode 100644
index 00000000000..4ca82a02552
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -0,0 +1,193 @@
+/*
+ * Copyright © 2006 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+#include "drmP.h"
+#include "drm.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "intel_bios.h"
+
+
+static void *
+find_section(struct bdb_header *bdb, int section_id)
+{
+	u8 *base = (u8 *)bdb;
+	int index = 0;
+	u16 total, current_size;
+	u8 current_id;
+
+	/* skip to first section */
+	index += bdb->header_size;
+	total = bdb->bdb_size;
+
+	/* walk the sections looking for section_id */
+	while (index < total) {
+		current_id = *(base + index);
+		index++;
+		current_size = *((u16 *)(base + index));
+		index += 2;
+		if (current_id == section_id)
+			return base + index;
+		index += current_size;
+	}
+
+	return NULL;
+}
+
+/* Try to find panel data */
+static void
+parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
+{
+	struct bdb_lvds_options *lvds_options;
+	struct bdb_lvds_lfp_data *lvds_lfp_data;
+	struct bdb_lvds_lfp_data_entry *entry;
+	struct lvds_dvo_timing *dvo_timing;
+	struct drm_display_mode *panel_fixed_mode;
+
+	/* Defaults if we can't find VBT info */
+	dev_priv->lvds_dither = 0;
+	dev_priv->lvds_vbt = 0;
+
+	lvds_options = find_section(bdb, BDB_LVDS_OPTIONS);
+	if (!lvds_options)
+		return;
+
+	dev_priv->lvds_dither = lvds_options->pixel_dither;
+	if (lvds_options->panel_type == 0xff)
+		return;
+
+	lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
+	if (!lvds_lfp_data)
+		return;
+
+	dev_priv->lvds_vbt = 1;
+
+	entry = &lvds_lfp_data->data[lvds_options->panel_type];
+	dvo_timing = &entry->dvo_timing;
+
+	panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode),
+				      DRM_MEM_DRIVER);
+
+	panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
+		dvo_timing->hactive_lo;
+	panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
+		((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
+	panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
+		dvo_timing->hsync_pulse_width;
+	panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
+		((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);
+
+	panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
+		dvo_timing->vactive_lo;
+	panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
+		dvo_timing->vsync_off;
+	panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
+		dvo_timing->vsync_pulse_width;
+	panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
+		((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
+	panel_fixed_mode->clock = dvo_timing->clock * 10;
+	panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
+
+	drm_mode_set_name(panel_fixed_mode);
+
+	dev_priv->vbt_mode = panel_fixed_mode;
+
+	DRM_DEBUG("Found panel mode in BIOS VBT tables:\n");
+	drm_mode_debug_printmodeline(panel_fixed_mode);
+
+	return;
+}
+
+static void
+parse_general_features(struct drm_i915_private *dev_priv,
+		       struct bdb_header *bdb)
+{
+	struct bdb_general_features *general;
+
+	/* Set sensible defaults in case we can't find the general block */
+	dev_priv->int_tv_support = 1;
+	dev_priv->int_crt_support = 1;
+
+	general = find_section(bdb, BDB_GENERAL_FEATURES);
+	if (general) {
+		dev_priv->int_tv_support = general->int_tv_support;
+		dev_priv->int_crt_support = general->int_crt_support;
+	}
+}
+
+/**
+ * intel_init_bios - initialize VBIOS settings & find VBT
+ * @dev: DRM device
+ *
+ * Loads the Video BIOS and checks that the VBT exists.  Sets scratch registers
+ * to appropriate values.
+ *
+ * VBT existence is a sanity check that is relied on by other i830_bios.c code.
+ * Note that it would be better to use a BIOS call to get the VBT, as BIOSes may
+ * feed an updated VBT back through that, compared to what we'll fetch using
+ * this method of groping around in the BIOS data.
+ *
+ * Returns 0 on success, nonzero on failure.
+ */
+bool
+intel_init_bios(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct pci_dev *pdev = dev->pdev;
+	struct vbt_header *vbt = NULL;
+	struct bdb_header *bdb;
+	u8 __iomem *bios;
+	size_t size;
+	int i;
+
+	bios = pci_map_rom(pdev, &size);
+	if (!bios)
+		return -1;
+
+	/* Scour memory looking for the VBT signature */
+	for (i = 0; i + 4 < size; i++) {
+		if (!memcmp(bios + i, "$VBT", 4)) {
+			vbt = (struct vbt_header *)(bios + i);
+			break;
+		}
+	}
+
+	if (!vbt) {
+		DRM_ERROR("VBT signature missing\n");
+		pci_unmap_rom(pdev, bios);
+		return -1;
+	}
+
+	bdb = (struct bdb_header *)(bios + i + vbt->bdb_offset);
+
+	/* Grab useful general definitions */
+	parse_general_features(dev_priv, bdb);
+	parse_panel_data(dev_priv, bdb);
+
+	pci_unmap_rom(pdev, bios);
+
+	return 0;
+}
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
new file mode 100644
index 00000000000..5ea715ace3a
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -0,0 +1,405 @@
+/*
+ * Copyright © 2006 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#ifndef _I830_BIOS_H_
+#define _I830_BIOS_H_
+
+#include "drmP.h"
+
+struct vbt_header {
+	u8 signature[20];		/**< Always starts with 'VBT$' */
+	u16 version;			/**< decimal */
+	u16 header_size;		/**< in bytes */
+	u16 vbt_size;			/**< in bytes */
+	u8 vbt_checksum;
+	u8 reserved0;
+	u32 bdb_offset;			/**< from beginning of VBT */
+	u32 aim_offset[4];		/**< from beginning of VBT */
+} __attribute__((packed));
+
+struct bdb_header {
+	u8 signature[16];		/**< Always 'BIOS_DATA_BLOCK' */
+	u16 version;			/**< decimal */
+	u16 header_size;		/**< in bytes */
+	u16 bdb_size;			/**< in bytes */
+};
+
+/* strictly speaking, this is a "skip" block, but it has interesting info */
+struct vbios_data {
+	u8 type; /* 0 == desktop, 1 == mobile */
+	u8 relstage;
+	u8 chipset;
+	u8 lvds_present:1;
+	u8 tv_present:1;
+	u8 rsvd2:6; /* finish byte */
+	u8 rsvd3[4];
+	u8 signon[155];
+	u8 copyright[61];
+	u16 code_segment;
+	u8 dos_boot_mode;
+	u8 bandwidth_percent;
+	u8 rsvd4; /* popup memory size */
+	u8 resize_pci_bios;
+	u8 rsvd5; /* is crt already on ddc2 */
+} __attribute__((packed));
+
+/*
+ * There are several types of BIOS data blocks (BDBs), each block has
+ * an ID and size in the first 3 bytes (ID in first, size in next 2).
+ * Known types are listed below.
+ */
+#define BDB_GENERAL_FEATURES	  1
+#define BDB_GENERAL_DEFINITIONS	  2
+#define BDB_OLD_TOGGLE_LIST	  3
+#define BDB_MODE_SUPPORT_LIST	  4
+#define BDB_GENERIC_MODE_TABLE	  5
+#define BDB_EXT_MMIO_REGS	  6
+#define BDB_SWF_IO		  7
+#define BDB_SWF_MMIO		  8
+#define BDB_DOT_CLOCK_TABLE	  9
+#define BDB_MODE_REMOVAL_TABLE	 10
+#define BDB_CHILD_DEVICE_TABLE	 11
+#define BDB_DRIVER_FEATURES	 12
+#define BDB_DRIVER_PERSISTENCE	 13
+#define BDB_EXT_TABLE_PTRS	 14
+#define BDB_DOT_CLOCK_OVERRIDE	 15
+#define BDB_DISPLAY_SELECT	 16
+/* 17 rsvd */
+#define BDB_DRIVER_ROTATION	 18
+#define BDB_DISPLAY_REMOVE	 19
+#define BDB_OEM_CUSTOM		 20
+#define BDB_EFP_LIST		 21 /* workarounds for VGA hsync/vsync */
+#define BDB_SDVO_LVDS_OPTIONS	 22
+#define BDB_SDVO_PANEL_DTDS	 23
+#define BDB_SDVO_LVDS_PNP_IDS	 24
+#define BDB_SDVO_LVDS_POWER_SEQ	 25
+#define BDB_TV_OPTIONS		 26
+#define BDB_LVDS_OPTIONS	 40
+#define BDB_LVDS_LFP_DATA_PTRS	 41
+#define BDB_LVDS_LFP_DATA	 42
+#define BDB_LVDS_BACKLIGHT	 43
+#define BDB_LVDS_POWER		 44
+#define BDB_SKIP		254 /* VBIOS private block, ignore */
+
+struct bdb_general_features {
+        /* bits 1 */
+	u8 panel_fitting:2;
+	u8 flexaim:1;
+	u8 msg_enable:1;
+	u8 clear_screen:3;
+	u8 color_flip:1;
+
+        /* bits 2 */
+	u8 download_ext_vbt:1;
+	u8 enable_ssc:1;
+	u8 ssc_freq:1;
+	u8 enable_lfp_on_override:1;
+	u8 disable_ssc_ddt:1;
+	u8 rsvd8:3; /* finish byte */
+
+        /* bits 3 */
+	u8 disable_smooth_vision:1;
+	u8 single_dvi:1;
+	u8 rsvd9:6; /* finish byte */
+
+        /* bits 4 */
+	u8 legacy_monitor_detect;
+
+        /* bits 5 */
+	u8 int_crt_support:1;
+	u8 int_tv_support:1;
+	u8 rsvd11:6; /* finish byte */
+} __attribute__((packed));
+
+struct bdb_general_definitions {
+	/* DDC GPIO */
+	u8 crt_ddc_gmbus_pin;
+
+	/* DPMS bits */
+	u8 dpms_acpi:1;
+	u8 skip_boot_crt_detect:1;
+	u8 dpms_aim:1;
+	u8 rsvd1:5; /* finish byte */
+
+	/* boot device bits */
+	u8 boot_display[2];
+	u8 child_dev_size;
+
+	/* device info */
+	u8 tv_or_lvds_info[33];
+	u8 dev1[33];
+	u8 dev2[33];
+	u8 dev3[33];
+	u8 dev4[33];
+	/* may be another device block here on some platforms */
+};
+
+struct bdb_lvds_options {
+	u8 panel_type;
+	u8 rsvd1;
+	/* LVDS capabilities, stored in a dword */
+	u8 rsvd2:1;
+	u8 lvds_edid:1;
+	u8 pixel_dither:1;
+	u8 pfit_ratio_auto:1;
+	u8 pfit_gfx_mode_enhanced:1;
+	u8 pfit_text_mode_enhanced:1;
+	u8 pfit_mode:2;
+	u8 rsvd4;
+} __attribute__((packed));
+
+/* LFP pointer table contains entries to the struct below */
+struct bdb_lvds_lfp_data_ptr {
+	u16 fp_timing_offset; /* offsets are from start of bdb */
+	u8 fp_table_size;
+	u16 dvo_timing_offset;
+	u8 dvo_table_size;
+	u16 panel_pnp_id_offset;
+	u8 pnp_table_size;
+} __attribute__((packed));
+
+struct bdb_lvds_lfp_data_ptrs {
+	u8 lvds_entries; /* followed by one or more lvds_data_ptr structs */
+	struct bdb_lvds_lfp_data_ptr ptr[16];
+} __attribute__((packed));
+
+/* LFP data has 3 blocks per entry */
+struct lvds_fp_timing {
+	u16 x_res;
+	u16 y_res;
+	u32 lvds_reg;
+	u32 lvds_reg_val;
+	u32 pp_on_reg;
+	u32 pp_on_reg_val;
+	u32 pp_off_reg;
+	u32 pp_off_reg_val;
+	u32 pp_cycle_reg;
+	u32 pp_cycle_reg_val;
+	u32 pfit_reg;
+	u32 pfit_reg_val;
+	u16 terminator;
+} __attribute__((packed));
+
+struct lvds_dvo_timing {
+	u16 clock;		/**< In 10khz */
+	u8 hactive_lo;
+	u8 hblank_lo;
+	u8 hblank_hi:4;
+	u8 hactive_hi:4;
+	u8 vactive_lo;
+	u8 vblank_lo;
+	u8 vblank_hi:4;
+	u8 vactive_hi:4;
+	u8 hsync_off_lo;
+	u8 hsync_pulse_width;
+	u8 vsync_pulse_width:4;
+	u8 vsync_off:4;
+	u8 rsvd0:6;
+	u8 hsync_off_hi:2;
+	u8 h_image;
+	u8 v_image;
+	u8 max_hv;
+	u8 h_border;
+	u8 v_border;
+	u8 rsvd1:3;
+	u8 digital:2;
+	u8 vsync_positive:1;
+	u8 hsync_positive:1;
+	u8 rsvd2:1;
+} __attribute__((packed));
+
+struct lvds_pnp_id {
+	u16 mfg_name;
+	u16 product_code;
+	u32 serial;
+	u8 mfg_week;
+	u8 mfg_year;
+} __attribute__((packed));
+
+struct bdb_lvds_lfp_data_entry {
+	struct lvds_fp_timing fp_timing;
+	struct lvds_dvo_timing dvo_timing;
+	struct lvds_pnp_id pnp_id;
+} __attribute__((packed));
+
+struct bdb_lvds_lfp_data {
+	struct bdb_lvds_lfp_data_entry data[16];
+} __attribute__((packed));
+
+struct aimdb_header {
+	char signature[16];
+	char oem_device[20];
+	u16 aimdb_version;
+	u16 aimdb_header_size;
+	u16 aimdb_size;
+} __attribute__((packed));
+
+struct aimdb_block {
+	u8 aimdb_id;
+	u16 aimdb_size;
+} __attribute__((packed));
+
+struct vch_panel_data {
+	u16 fp_timing_offset;
+	u8 fp_timing_size;
+	u16 dvo_timing_offset;
+	u8 dvo_timing_size;
+	u16 text_fitting_offset;
+	u8 text_fitting_size;
+	u16 graphics_fitting_offset;
+	u8 graphics_fitting_size;
+} __attribute__((packed));
+
+struct vch_bdb_22 {
+	struct aimdb_block aimdb_block;
+	struct vch_panel_data panels[16];
+} __attribute__((packed));
+
+bool intel_init_bios(struct drm_device *dev);
+
+/*
+ * Driver<->VBIOS interaction occurs through scratch bits in
+ * GR18 & SWF*.
+ */
+
+/* GR18 bits are set on display switch and hotkey events */
+#define GR18_DRIVER_SWITCH_EN	(1<<7) /* 0: VBIOS control, 1: driver control */
+#define GR18_HOTKEY_MASK	0x78 /* See also SWF4 15:0 */
+#define   GR18_HK_NONE		(0x0<<3)
+#define   GR18_HK_LFP_STRETCH	(0x1<<3)
+#define   GR18_HK_TOGGLE_DISP	(0x2<<3)
+#define   GR18_HK_DISP_SWITCH	(0x4<<3) /* see SWF14 15:0 for what to enable */
+#define   GR18_HK_POPUP_DISABLED (0x6<<3)
+#define   GR18_HK_POPUP_ENABLED	(0x7<<3)
+#define   GR18_HK_PFIT		(0x8<<3)
+#define   GR18_HK_APM_CHANGE	(0xa<<3)
+#define   GR18_HK_MULTIPLE	(0xc<<3)
+#define GR18_USER_INT_EN	(1<<2)
+#define GR18_A0000_FLUSH_EN	(1<<1)
+#define GR18_SMM_EN		(1<<0)
+
+/* Set by driver, cleared by VBIOS */
+#define SWF00_YRES_SHIFT	16
+#define SWF00_XRES_SHIFT	0
+#define SWF00_RES_MASK		0xffff
+
+/* Set by VBIOS at boot time and driver at runtime */
+#define SWF01_TV2_FORMAT_SHIFT	8
+#define SWF01_TV1_FORMAT_SHIFT	0
+#define SWF01_TV_FORMAT_MASK	0xffff
+
+#define SWF10_VBIOS_BLC_I2C_EN	(1<<29)
+#define SWF10_GTT_OVERRIDE_EN	(1<<28)
+#define SWF10_LFP_DPMS_OVR	(1<<27) /* override DPMS on display switch */
+#define SWF10_ACTIVE_TOGGLE_LIST_MASK (7<<24)
+#define   SWF10_OLD_TOGGLE	0x0
+#define   SWF10_TOGGLE_LIST_1	0x1
+#define   SWF10_TOGGLE_LIST_2	0x2
+#define   SWF10_TOGGLE_LIST_3	0x3
+#define   SWF10_TOGGLE_LIST_4	0x4
+#define SWF10_PANNING_EN	(1<<23)
+#define SWF10_DRIVER_LOADED	(1<<22)
+#define SWF10_EXTENDED_DESKTOP	(1<<21)
+#define SWF10_EXCLUSIVE_MODE	(1<<20)
+#define SWF10_OVERLAY_EN	(1<<19)
+#define SWF10_PLANEB_HOLDOFF	(1<<18)
+#define SWF10_PLANEA_HOLDOFF	(1<<17)
+#define SWF10_VGA_HOLDOFF	(1<<16)
+#define SWF10_ACTIVE_DISP_MASK	0xffff
+#define   SWF10_PIPEB_LFP2	(1<<15)
+#define   SWF10_PIPEB_EFP2	(1<<14)
+#define   SWF10_PIPEB_TV2	(1<<13)
+#define   SWF10_PIPEB_CRT2	(1<<12)
+#define   SWF10_PIPEB_LFP	(1<<11)
+#define   SWF10_PIPEB_EFP	(1<<10)
+#define   SWF10_PIPEB_TV	(1<<9)
+#define   SWF10_PIPEB_CRT	(1<<8)
+#define   SWF10_PIPEA_LFP2	(1<<7)
+#define   SWF10_PIPEA_EFP2	(1<<6)
+#define   SWF10_PIPEA_TV2	(1<<5)
+#define   SWF10_PIPEA_CRT2	(1<<4)
+#define   SWF10_PIPEA_LFP	(1<<3)
+#define   SWF10_PIPEA_EFP	(1<<2)
+#define   SWF10_PIPEA_TV	(1<<1)
+#define   SWF10_PIPEA_CRT	(1<<0)
+
+#define SWF11_MEMORY_SIZE_SHIFT	16
+#define SWF11_SV_TEST_EN	(1<<15)
+#define SWF11_IS_AGP		(1<<14)
+#define SWF11_DISPLAY_HOLDOFF	(1<<13)
+#define SWF11_DPMS_REDUCED	(1<<12)
+#define SWF11_IS_VBE_MODE	(1<<11)
+#define SWF11_PIPEB_ACCESS	(1<<10) /* 0 here means pipe a */
+#define SWF11_DPMS_MASK		0x07
+#define   SWF11_DPMS_OFF	(1<<2)
+#define   SWF11_DPMS_SUSPEND	(1<<1)
+#define   SWF11_DPMS_STANDBY	(1<<0)
+#define   SWF11_DPMS_ON		0
+
+#define SWF14_GFX_PFIT_EN	(1<<31)
+#define SWF14_TEXT_PFIT_EN	(1<<30)
+#define SWF14_LID_STATUS_CLOSED	(1<<29) /* 0 here means open */
+#define SWF14_POPUP_EN		(1<<28)
+#define SWF14_DISPLAY_HOLDOFF	(1<<27)
+#define SWF14_DISP_DETECT_EN	(1<<26)
+#define SWF14_DOCKING_STATUS_DOCKED (1<<25) /* 0 here means undocked */
+#define SWF14_DRIVER_STATUS	(1<<24)
+#define SWF14_OS_TYPE_WIN9X	(1<<23)
+#define SWF14_OS_TYPE_WINNT	(1<<22)
+/* 21:19 rsvd */
+#define SWF14_PM_TYPE_MASK	0x00070000
+#define   SWF14_PM_ACPI_VIDEO	(0x4 << 16)
+#define   SWF14_PM_ACPI		(0x3 << 16)
+#define   SWF14_PM_APM_12	(0x2 << 16)
+#define   SWF14_PM_APM_11	(0x1 << 16)
+#define SWF14_HK_REQUEST_MASK	0x0000ffff /* see GR18 6:3 for event type */
+          /* if GR18 indicates a display switch */
+#define   SWF14_DS_PIPEB_LFP2_EN (1<<15)
+#define   SWF14_DS_PIPEB_EFP2_EN (1<<14)
+#define   SWF14_DS_PIPEB_TV2_EN  (1<<13)
+#define   SWF14_DS_PIPEB_CRT2_EN (1<<12)
+#define   SWF14_DS_PIPEB_LFP_EN  (1<<11)
+#define   SWF14_DS_PIPEB_EFP_EN  (1<<10)
+#define   SWF14_DS_PIPEB_TV_EN   (1<<9)
+#define   SWF14_DS_PIPEB_CRT_EN  (1<<8)
+#define   SWF14_DS_PIPEA_LFP2_EN (1<<7)
+#define   SWF14_DS_PIPEA_EFP2_EN (1<<6)
+#define   SWF14_DS_PIPEA_TV2_EN  (1<<5)
+#define   SWF14_DS_PIPEA_CRT2_EN (1<<4)
+#define   SWF14_DS_PIPEA_LFP_EN  (1<<3)
+#define   SWF14_DS_PIPEA_EFP_EN  (1<<2)
+#define   SWF14_DS_PIPEA_TV_EN   (1<<1)
+#define   SWF14_DS_PIPEA_CRT_EN  (1<<0)
+          /* if GR18 indicates a panel fitting request */
+#define   SWF14_PFIT_EN		(1<<0) /* 0 means disable */
+          /* if GR18 indicates an APM change request */
+#define   SWF14_APM_HIBERNATE	0x4
+#define   SWF14_APM_SUSPEND	0x3
+#define   SWF14_APM_STANDBY	0x1
+#define   SWF14_APM_RESTORE	0x0
+
+#endif /* _I830_BIOS_H_ */
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
new file mode 100644
index 00000000000..5d9c94eb705
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -0,0 +1,284 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_crtc_helper.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 temp;
+
+	temp = I915_READ(ADPA);
+	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
+	temp &= ~ADPA_DAC_ENABLE;
+
+	switch(mode) {
+	case DRM_MODE_DPMS_ON:
+		temp |= ADPA_DAC_ENABLE;
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+		temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
+		break;
+	case DRM_MODE_DPMS_SUSPEND:
+		temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
+	case DRM_MODE_DPMS_OFF:
+		temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
+	}
+
+	I915_WRITE(ADPA, temp);
+}
+
+static int intel_crt_mode_valid(struct drm_connector *connector,
+				struct drm_display_mode *mode)
+{
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	if (mode->clock > 400000 || mode->clock < 25000)
+		return MODE_CLOCK_RANGE;
+
+	return MODE_OK;
+}
+
+static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
+				 struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static void intel_crt_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int dpll_md_reg;
+	u32 adpa, dpll_md;
+
+	if (intel_crtc->pipe == 0)
+		dpll_md_reg = DPLL_A_MD;
+	else
+		dpll_md_reg = DPLL_B_MD;
+
+	/*
+	 * Disable separate mode multiplier used when cloning SDVO to CRT
+	 * XXX this needs to be adjusted when we really are cloning
+	 */
+	if (IS_I965G(dev)) {
+		dpll_md = I915_READ(dpll_md_reg);
+		I915_WRITE(dpll_md_reg,
+			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
+	}
+
+	adpa = 0;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		adpa |= ADPA_VSYNC_ACTIVE_HIGH;
+
+	if (intel_crtc->pipe == 0)
+		adpa |= ADPA_PIPE_A_SELECT;
+	else
+		adpa |= ADPA_PIPE_B_SELECT;
+
+	I915_WRITE(ADPA, adpa);
+}
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
+ *
+ * Not for i915G/i915GM
+ *
+ * \return true if CRT is connected.
+ * \return false if CRT is disconnected.
+ */
+static bool intel_crt_detect_hotplug(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 temp;
+
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+
+	temp = I915_READ(PORT_HOTPLUG_EN);
+
+	I915_WRITE(PORT_HOTPLUG_EN,
+		   temp | CRT_HOTPLUG_FORCE_DETECT | (1 << 5));
+
+	do {
+		if (!(I915_READ(PORT_HOTPLUG_EN) & CRT_HOTPLUG_FORCE_DETECT))
+			break;
+		msleep(1);
+	} while (time_after(timeout, jiffies));
+
+	if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) ==
+	    CRT_HOTPLUG_MONITOR_COLOR)
+		return true;
+
+	return false;
+}
+
+static bool intel_crt_detect_ddc(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	/* CRT should always be at 0, but check anyway */
+	if (intel_output->type != INTEL_OUTPUT_ANALOG)
+		return false;
+
+	return intel_ddc_probe(intel_output);
+}
+
+static enum drm_connector_status intel_crt_detect(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+
+	if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) {
+		if (intel_crt_detect_hotplug(connector))
+			return connector_status_connected;
+		else
+			return connector_status_disconnected;
+	}
+
+	if (intel_crt_detect_ddc(connector))
+		return connector_status_connected;
+
+	/* TODO use load detect */
+	return connector_status_unknown;
+}
+
+static void intel_crt_destroy(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	intel_i2c_destroy(intel_output->ddc_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static int intel_crt_get_modes(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	return intel_ddc_get_modes(intel_output);
+}
+
+static int intel_crt_set_property(struct drm_connector *connector,
+				  struct drm_property *property,
+				  uint64_t value)
+{
+	struct drm_device *dev = connector->dev;
+
+	if (property == dev->mode_config.dpms_property && connector->encoder)
+		intel_crt_dpms(connector->encoder, (uint32_t)(value & 0xf));
+
+	return 0;
+}
+
+/*
+ * Routines for controlling stuff on the analog port
+ */
+
+static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = {
+	.dpms = intel_crt_dpms,
+	.mode_fixup = intel_crt_mode_fixup,
+	.prepare = intel_encoder_prepare,
+	.commit = intel_encoder_commit,
+	.mode_set = intel_crt_mode_set,
+};
+
+static const struct drm_connector_funcs intel_crt_connector_funcs = {
+	.detect = intel_crt_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = intel_crt_destroy,
+	.set_property = intel_crt_set_property,
+};
+
+static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
+	.mode_valid = intel_crt_mode_valid,
+	.get_modes = intel_crt_get_modes,
+	.best_encoder = intel_best_encoder,
+};
+
+void intel_crt_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs intel_crt_enc_funcs = {
+	.destroy = intel_crt_enc_destroy,
+};
+
+void intel_crt_init(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+	struct intel_output *intel_output;
+
+	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+	if (!intel_output)
+		return;
+
+	connector = &intel_output->base;
+	drm_connector_init(dev, &intel_output->base,
+			   &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
+
+	drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs,
+			 DRM_MODE_ENCODER_DAC);
+
+	drm_mode_connector_attach_encoder(&intel_output->base,
+					  &intel_output->enc);
+
+	/* Set up the DDC bus. */
+	intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A");
+	if (!intel_output->ddc_bus) {
+		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
+			   "failed.\n");
+		return;
+	}
+
+	intel_output->type = INTEL_OUTPUT_ANALOG;
+	connector->interlace_allowed = 0;
+	connector->doublescan_allowed = 0;
+
+	drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs);
+	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
+
+	drm_sysfs_connector_add(connector);
+}
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
new file mode 100644
index 00000000000..96c2da5b74e
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -0,0 +1,1621 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+#include "drm_crtc_helper.h"
+
+bool intel_pipe_has_type (struct drm_crtc *crtc, int type);
+
+typedef struct {
+    /* given values */
+    int n;
+    int m1, m2;
+    int p1, p2;
+    /* derived values */
+    int	dot;
+    int	vco;
+    int	m;
+    int	p;
+} intel_clock_t;
+
+typedef struct {
+    int	min, max;
+} intel_range_t;
+
+typedef struct {
+    int	dot_limit;
+    int	p2_slow, p2_fast;
+} intel_p2_t;
+
+#define INTEL_P2_NUM		      2
+
+typedef struct {
+    intel_range_t   dot, vco, n, m, m1, m2, p, p1;
+    intel_p2_t	    p2;
+} intel_limit_t;
+
+#define I8XX_DOT_MIN		  25000
+#define I8XX_DOT_MAX		 350000
+#define I8XX_VCO_MIN		 930000
+#define I8XX_VCO_MAX		1400000
+#define I8XX_N_MIN		      3
+#define I8XX_N_MAX		     16
+#define I8XX_M_MIN		     96
+#define I8XX_M_MAX		    140
+#define I8XX_M1_MIN		     18
+#define I8XX_M1_MAX		     26
+#define I8XX_M2_MIN		      6
+#define I8XX_M2_MAX		     16
+#define I8XX_P_MIN		      4
+#define I8XX_P_MAX		    128
+#define I8XX_P1_MIN		      2
+#define I8XX_P1_MAX		     33
+#define I8XX_P1_LVDS_MIN	      1
+#define I8XX_P1_LVDS_MAX	      6
+#define I8XX_P2_SLOW		      4
+#define I8XX_P2_FAST		      2
+#define I8XX_P2_LVDS_SLOW	      14
+#define I8XX_P2_LVDS_FAST	      14 /* No fast option */
+#define I8XX_P2_SLOW_LIMIT	 165000
+
+#define I9XX_DOT_MIN		  20000
+#define I9XX_DOT_MAX		 400000
+#define I9XX_VCO_MIN		1400000
+#define I9XX_VCO_MAX		2800000
+#define I9XX_N_MIN		      3
+#define I9XX_N_MAX		      8
+#define I9XX_M_MIN		     70
+#define I9XX_M_MAX		    120
+#define I9XX_M1_MIN		     10
+#define I9XX_M1_MAX		     20
+#define I9XX_M2_MIN		      5
+#define I9XX_M2_MAX		      9
+#define I9XX_P_SDVO_DAC_MIN	      5
+#define I9XX_P_SDVO_DAC_MAX	     80
+#define I9XX_P_LVDS_MIN		      7
+#define I9XX_P_LVDS_MAX		     98
+#define I9XX_P1_MIN		      1
+#define I9XX_P1_MAX		      8
+#define I9XX_P2_SDVO_DAC_SLOW		     10
+#define I9XX_P2_SDVO_DAC_FAST		      5
+#define I9XX_P2_SDVO_DAC_SLOW_LIMIT	 200000
+#define I9XX_P2_LVDS_SLOW		     14
+#define I9XX_P2_LVDS_FAST		      7
+#define I9XX_P2_LVDS_SLOW_LIMIT		 112000
+
+#define INTEL_LIMIT_I8XX_DVO_DAC    0
+#define INTEL_LIMIT_I8XX_LVDS	    1
+#define INTEL_LIMIT_I9XX_SDVO_DAC   2
+#define INTEL_LIMIT_I9XX_LVDS	    3
+
+static const intel_limit_t intel_limits[] = {
+    { /* INTEL_LIMIT_I8XX_DVO_DAC */
+        .dot = { .min = I8XX_DOT_MIN,		.max = I8XX_DOT_MAX },
+        .vco = { .min = I8XX_VCO_MIN,		.max = I8XX_VCO_MAX },
+        .n   = { .min = I8XX_N_MIN,		.max = I8XX_N_MAX },
+        .m   = { .min = I8XX_M_MIN,		.max = I8XX_M_MAX },
+        .m1  = { .min = I8XX_M1_MIN,		.max = I8XX_M1_MAX },
+        .m2  = { .min = I8XX_M2_MIN,		.max = I8XX_M2_MAX },
+        .p   = { .min = I8XX_P_MIN,		.max = I8XX_P_MAX },
+        .p1  = { .min = I8XX_P1_MIN,		.max = I8XX_P1_MAX },
+	.p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
+		 .p2_slow = I8XX_P2_SLOW,	.p2_fast = I8XX_P2_FAST },
+    },
+    { /* INTEL_LIMIT_I8XX_LVDS */
+        .dot = { .min = I8XX_DOT_MIN,		.max = I8XX_DOT_MAX },
+        .vco = { .min = I8XX_VCO_MIN,		.max = I8XX_VCO_MAX },
+        .n   = { .min = I8XX_N_MIN,		.max = I8XX_N_MAX },
+        .m   = { .min = I8XX_M_MIN,		.max = I8XX_M_MAX },
+        .m1  = { .min = I8XX_M1_MIN,		.max = I8XX_M1_MAX },
+        .m2  = { .min = I8XX_M2_MIN,		.max = I8XX_M2_MAX },
+        .p   = { .min = I8XX_P_MIN,		.max = I8XX_P_MAX },
+        .p1  = { .min = I8XX_P1_LVDS_MIN,	.max = I8XX_P1_LVDS_MAX },
+	.p2  = { .dot_limit = I8XX_P2_SLOW_LIMIT,
+		 .p2_slow = I8XX_P2_LVDS_SLOW,	.p2_fast = I8XX_P2_LVDS_FAST },
+    },
+    { /* INTEL_LIMIT_I9XX_SDVO_DAC */
+        .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX },
+        .vco = { .min = I9XX_VCO_MIN,		.max = I9XX_VCO_MAX },
+        .n   = { .min = I9XX_N_MIN,		.max = I9XX_N_MAX },
+        .m   = { .min = I9XX_M_MIN,		.max = I9XX_M_MAX },
+        .m1  = { .min = I9XX_M1_MIN,		.max = I9XX_M1_MAX },
+        .m2  = { .min = I9XX_M2_MIN,		.max = I9XX_M2_MAX },
+        .p   = { .min = I9XX_P_SDVO_DAC_MIN,	.max = I9XX_P_SDVO_DAC_MAX },
+        .p1  = { .min = I9XX_P1_MIN,		.max = I9XX_P1_MAX },
+	.p2  = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
+		 .p2_slow = I9XX_P2_SDVO_DAC_SLOW,	.p2_fast = I9XX_P2_SDVO_DAC_FAST },
+    },
+    { /* INTEL_LIMIT_I9XX_LVDS */
+        .dot = { .min = I9XX_DOT_MIN,		.max = I9XX_DOT_MAX },
+        .vco = { .min = I9XX_VCO_MIN,		.max = I9XX_VCO_MAX },
+        .n   = { .min = I9XX_N_MIN,		.max = I9XX_N_MAX },
+        .m   = { .min = I9XX_M_MIN,		.max = I9XX_M_MAX },
+        .m1  = { .min = I9XX_M1_MIN,		.max = I9XX_M1_MAX },
+        .m2  = { .min = I9XX_M2_MIN,		.max = I9XX_M2_MAX },
+        .p   = { .min = I9XX_P_LVDS_MIN,	.max = I9XX_P_LVDS_MAX },
+        .p1  = { .min = I9XX_P1_MIN,		.max = I9XX_P1_MAX },
+	/* The single-channel range is 25-112Mhz, and dual-channel
+	 * is 80-224Mhz.  Prefer single channel as much as possible.
+	 */
+	.p2  = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
+		 .p2_slow = I9XX_P2_LVDS_SLOW,	.p2_fast = I9XX_P2_LVDS_FAST },
+    },
+};
+
+static const intel_limit_t *intel_limit(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	const intel_limit_t *limit;
+
+	if (IS_I9XX(dev)) {
+		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+			limit = &intel_limits[INTEL_LIMIT_I9XX_LVDS];
+		else
+			limit = &intel_limits[INTEL_LIMIT_I9XX_SDVO_DAC];
+	} else {
+		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+			limit = &intel_limits[INTEL_LIMIT_I8XX_LVDS];
+		else
+			limit = &intel_limits[INTEL_LIMIT_I8XX_DVO_DAC];
+	}
+	return limit;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
+
+static void i8xx_clock(int refclk, intel_clock_t *clock)
+{
+	clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+	clock->p = clock->p1 * clock->p2;
+	clock->vco = refclk * clock->m / (clock->n + 2);
+	clock->dot = clock->vco / clock->p;
+}
+
+/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */
+
+static void i9xx_clock(int refclk, intel_clock_t *clock)
+{
+	clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2);
+	clock->p = clock->p1 * clock->p2;
+	clock->vco = refclk * clock->m / (clock->n + 2);
+	clock->dot = clock->vco / clock->p;
+}
+
+static void intel_clock(struct drm_device *dev, int refclk,
+			intel_clock_t *clock)
+{
+	if (IS_I9XX(dev))
+		return i9xx_clock (refclk, clock);
+	else
+		return i8xx_clock (refclk, clock);
+}
+
+/**
+ * Returns whether any output on the specified pipe is of the specified type
+ */
+bool intel_pipe_has_type (struct drm_crtc *crtc, int type)
+{
+    struct drm_device *dev = crtc->dev;
+    struct drm_mode_config *mode_config = &dev->mode_config;
+    struct drm_connector *l_entry;
+
+    list_for_each_entry(l_entry, &mode_config->connector_list, head) {
+	    if (l_entry->encoder &&
+	        l_entry->encoder->crtc == crtc) {
+		    struct intel_output *intel_output = to_intel_output(l_entry);
+		    if (intel_output->type == type)
+			    return true;
+	    }
+    }
+    return false;
+}
+
+#define INTELPllInvalid(s)   { /* ErrorF (s) */; return false; }
+/**
+ * Returns whether the given set of divisors are valid for a given refclk with
+ * the given connectors.
+ */
+
+static bool intel_PLL_is_valid(struct drm_crtc *crtc, intel_clock_t *clock)
+{
+	const intel_limit_t *limit = intel_limit (crtc);
+
+	if (clock->p1  < limit->p1.min  || limit->p1.max  < clock->p1)
+		INTELPllInvalid ("p1 out of range\n");
+	if (clock->p   < limit->p.min   || limit->p.max   < clock->p)
+		INTELPllInvalid ("p out of range\n");
+	if (clock->m2  < limit->m2.min  || limit->m2.max  < clock->m2)
+		INTELPllInvalid ("m2 out of range\n");
+	if (clock->m1  < limit->m1.min  || limit->m1.max  < clock->m1)
+		INTELPllInvalid ("m1 out of range\n");
+	if (clock->m1 <= clock->m2)
+		INTELPllInvalid ("m1 <= m2\n");
+	if (clock->m   < limit->m.min   || limit->m.max   < clock->m)
+		INTELPllInvalid ("m out of range\n");
+	if (clock->n   < limit->n.min   || limit->n.max   < clock->n)
+		INTELPllInvalid ("n out of range\n");
+	if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
+		INTELPllInvalid ("vco out of range\n");
+	/* XXX: We may need to be checking "Dot clock" depending on the multiplier,
+	 * connector, etc., rather than just a single range.
+	 */
+	if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
+		INTELPllInvalid ("dot out of range\n");
+
+	return true;
+}
+
+/**
+ * Returns a set of divisors for the desired target clock with the given
+ * refclk, or FALSE.  The returned values represent the clock equation:
+ * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+ */
+static bool intel_find_best_PLL(struct drm_crtc *crtc, int target,
+				int refclk, intel_clock_t *best_clock)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	intel_clock_t clock;
+	const intel_limit_t *limit = intel_limit(crtc);
+	int err = target;
+
+	if (IS_I9XX(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	    (I915_READ(LVDS) & LVDS_PORT_EN) != 0) {
+		/*
+		 * For LVDS, if the panel is on, just rely on its current
+		 * settings for dual-channel.  We haven't figured out how to
+		 * reliably set up different single/dual channel state, if we
+		 * even can.
+		 */
+		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP)
+			clock.p2 = limit->p2.p2_fast;
+		else
+			clock.p2 = limit->p2.p2_slow;
+	} else {
+		if (target < limit->p2.dot_limit)
+			clock.p2 = limit->p2.p2_slow;
+		else
+			clock.p2 = limit->p2.p2_fast;
+	}
+
+	memset (best_clock, 0, sizeof (*best_clock));
+
+	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
+		for (clock.m2 = limit->m2.min; clock.m2 < clock.m1 &&
+			     clock.m2 <= limit->m2.max; clock.m2++) {
+			for (clock.n = limit->n.min; clock.n <= limit->n.max;
+			     clock.n++) {
+				for (clock.p1 = limit->p1.min;
+				     clock.p1 <= limit->p1.max; clock.p1++) {
+					int this_err;
+
+					intel_clock(dev, refclk, &clock);
+
+					if (!intel_PLL_is_valid(crtc, &clock))
+						continue;
+
+					this_err = abs(clock.dot - target);
+					if (this_err < err) {
+						*best_clock = clock;
+						err = this_err;
+					}
+				}
+			}
+		}
+	}
+
+	return (err != target);
+}
+
+void
+intel_wait_for_vblank(struct drm_device *dev)
+{
+	/* Wait for 20ms, i.e. one cycle at 50hz. */
+	udelay(20000);
+}
+
+void
+intel_pipe_set_base(struct drm_crtc *crtc, int x, int y)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_master_private *master_priv;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_framebuffer *intel_fb;
+	struct drm_i915_gem_object *obj_priv;
+	struct drm_gem_object *obj;
+	int pipe = intel_crtc->pipe;
+	unsigned long Start, Offset;
+	int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR);
+	int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
+	int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+	u32 dspcntr;
+
+	/* no fb bound */
+	if (!crtc->fb) {
+		DRM_DEBUG("No FB bound\n");
+		return;
+	}
+
+	intel_fb = to_intel_framebuffer(crtc->fb);
+
+	obj = intel_fb->obj;
+	obj_priv = obj->driver_private;
+
+	Start = obj_priv->gtt_offset;
+	Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
+
+	I915_WRITE(dspstride, crtc->fb->pitch);
+
+	dspcntr = I915_READ(dspcntr_reg);
+	switch (crtc->fb->bits_per_pixel) {
+	case 8:
+		dspcntr |= DISPPLANE_8BPP;
+		break;
+	case 16:
+		if (crtc->fb->depth == 15)
+			dspcntr |= DISPPLANE_15_16BPP;
+		else
+			dspcntr |= DISPPLANE_16BPP;
+		break;
+	case 24:
+	case 32:
+		dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+		break;
+	default:
+		DRM_ERROR("Unknown color depth\n");
+		return;
+	}
+	I915_WRITE(dspcntr_reg, dspcntr);
+
+	DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
+	if (IS_I965G(dev)) {
+		I915_WRITE(dspbase, Offset);
+		I915_READ(dspbase);
+		I915_WRITE(dspsurf, Start);
+		I915_READ(dspsurf);
+	} else {
+		I915_WRITE(dspbase, Start + Offset);
+		I915_READ(dspbase);
+	}
+
+
+	if (!dev->primary->master)
+		return;
+
+	master_priv = dev->primary->master->driver_priv;
+	if (!master_priv->sarea_priv)
+		return;
+
+	switch (pipe) {
+	case 0:
+		master_priv->sarea_priv->pipeA_x = x;
+		master_priv->sarea_priv->pipeA_y = y;
+		break;
+	case 1:
+		master_priv->sarea_priv->pipeB_x = x;
+		master_priv->sarea_priv->pipeB_y = y;
+		break;
+	default:
+		DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+		break;
+	}
+}
+
+
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_master_private *master_priv;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+	int dspbase_reg = (pipe == 0) ? DSPAADDR : DSPBADDR;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	u32 temp;
+	bool enabled;
+
+	/* XXX: When our outputs are all unaware of DPMS modes other than off
+	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+	 */
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+		/* Enable the DPLL */
+		temp = I915_READ(dpll_reg);
+		if ((temp & DPLL_VCO_ENABLE) == 0) {
+			I915_WRITE(dpll_reg, temp);
+			I915_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+			I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+			I915_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+			I915_WRITE(dpll_reg, temp | DPLL_VCO_ENABLE);
+			I915_READ(dpll_reg);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+		}
+
+		/* Enable the pipe */
+		temp = I915_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) == 0)
+			I915_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
+
+		/* Enable the plane */
+		temp = I915_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+			I915_WRITE(dspcntr_reg, temp | DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+		}
+
+		intel_crtc_load_lut(crtc);
+
+		/* Give the overlay scaler a chance to enable if it's on this pipe */
+		//intel_crtc_dpms_video(crtc, true); TODO
+	break;
+	case DRM_MODE_DPMS_OFF:
+		/* Give the overlay scaler a chance to disable if it's on this pipe */
+		//intel_crtc_dpms_video(crtc, FALSE); TODO
+
+		/* Disable the VGA plane that we never use */
+		I915_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+		/* Disable display plane */
+		temp = I915_READ(dspcntr_reg);
+		if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+			I915_WRITE(dspcntr_reg, temp & ~DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+			I915_READ(dspbase_reg);
+		}
+
+		if (!IS_I9XX(dev)) {
+			/* Wait for vblank for the disable to take effect */
+			intel_wait_for_vblank(dev);
+		}
+
+		/* Next, disable display pipes */
+		temp = I915_READ(pipeconf_reg);
+		if ((temp & PIPEACONF_ENABLE) != 0) {
+			I915_WRITE(pipeconf_reg, temp & ~PIPEACONF_ENABLE);
+			I915_READ(pipeconf_reg);
+		}
+
+		/* Wait for vblank for the disable to take effect. */
+		intel_wait_for_vblank(dev);
+
+		temp = I915_READ(dpll_reg);
+		if ((temp & DPLL_VCO_ENABLE) != 0) {
+			I915_WRITE(dpll_reg, temp & ~DPLL_VCO_ENABLE);
+			I915_READ(dpll_reg);
+		}
+
+		/* Wait for the clocks to turn off. */
+		udelay(150);
+		break;
+	}
+
+	if (!dev->primary->master)
+		return;
+
+	master_priv = dev->primary->master->driver_priv;
+	if (!master_priv->sarea_priv)
+		return;
+
+	enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
+
+	switch (pipe) {
+	case 0:
+		master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
+		master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
+		break;
+	case 1:
+		master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
+		master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
+		break;
+	default:
+		DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+		break;
+	}
+
+	intel_crtc->dpms_mode = mode;
+}
+
+static void intel_crtc_prepare (struct drm_crtc *crtc)
+{
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+static void intel_crtc_commit (struct drm_crtc *crtc)
+{
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+void intel_encoder_prepare (struct drm_encoder *encoder)
+{
+	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+	/* lvds has its own version of prepare see intel_lvds_prepare */
+	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+void intel_encoder_commit (struct drm_encoder *encoder)
+{
+	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+	/* lvds has its own version of commit see intel_lvds_commit */
+	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+}
+
+static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+
+/** Returns the core display clock speed for i830 - i945 */
+static int intel_get_core_clock_speed(struct drm_device *dev)
+{
+
+	/* Core clock values taken from the published datasheets.
+	 * The 830 may go up to 166 Mhz, which we should check.
+	 */
+	if (IS_I945G(dev))
+		return 400000;
+	else if (IS_I915G(dev))
+		return 333000;
+	else if (IS_I945GM(dev) || IS_845G(dev))
+		return 200000;
+	else if (IS_I915GM(dev)) {
+		u16 gcfgc = 0;
+
+		pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
+
+		if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
+			return 133000;
+		else {
+			switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
+			case GC_DISPLAY_CLOCK_333_MHZ:
+				return 333000;
+			default:
+			case GC_DISPLAY_CLOCK_190_200_MHZ:
+				return 190000;
+			}
+		}
+	} else if (IS_I865G(dev))
+		return 266000;
+	else if (IS_I855(dev)) {
+		u16 hpllcc = 0;
+		/* Assume that the hardware is in the high speed state.  This
+		 * should be the default.
+		 */
+		switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
+		case GC_CLOCK_133_200:
+		case GC_CLOCK_100_200:
+			return 200000;
+		case GC_CLOCK_166_250:
+			return 250000;
+		case GC_CLOCK_100_133:
+			return 133000;
+		}
+	} else /* 852, 830 */
+		return 133000;
+
+	return 0; /* Silence gcc warning */
+}
+
+
+/**
+ * Return the pipe currently connected to the panel fitter,
+ * or -1 if the panel fitter is not present or not in use
+ */
+static int intel_panel_fitter_pipe (struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32  pfit_control;
+
+	/* i830 doesn't have a panel fitter */
+	if (IS_I830(dev))
+		return -1;
+
+	pfit_control = I915_READ(PFIT_CONTROL);
+
+	/* See if the panel fitter is in use */
+	if ((pfit_control & PFIT_ENABLE) == 0)
+		return -1;
+
+	/* 965 can place panel fitter on either pipe */
+	if (IS_I965G(dev))
+		return (pfit_control >> 29) & 0x3;
+
+	/* older chips can only use pipe 1 */
+	return 1;
+}
+
+static void intel_crtc_mode_set(struct drm_crtc *crtc,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode,
+				int x, int y)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int fp_reg = (pipe == 0) ? FPA0 : FPB0;
+	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+	int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
+	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
+	int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
+	int hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
+	int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
+	int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
+	int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
+	int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
+	int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
+	int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
+	int refclk;
+	intel_clock_t clock;
+	u32 dpll = 0, fp = 0, dspcntr, pipeconf;
+	bool ok, is_sdvo = false, is_dvo = false;
+	bool is_crt = false, is_lvds = false, is_tv = false;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_connector *connector;
+
+	drm_vblank_pre_modeset(dev, pipe);
+
+	list_for_each_entry(connector, &mode_config->connector_list, head) {
+		struct intel_output *intel_output = to_intel_output(connector);
+
+		if (!connector->encoder || connector->encoder->crtc != crtc)
+			continue;
+
+		switch (intel_output->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_SDVO:
+			is_sdvo = true;
+			break;
+		case INTEL_OUTPUT_DVO:
+			is_dvo = true;
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			is_tv = true;
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			is_crt = true;
+			break;
+		}
+	}
+
+	if (IS_I9XX(dev)) {
+		refclk = 96000;
+	} else {
+		refclk = 48000;
+	}
+
+	ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock);
+	if (!ok) {
+		DRM_ERROR("Couldn't find PLL settings for mode!\n");
+		return;
+	}
+
+	fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+
+	dpll = DPLL_VGA_MODE_DIS;
+	if (IS_I9XX(dev)) {
+		if (is_lvds)
+			dpll |= DPLLB_MODE_LVDS;
+		else
+			dpll |= DPLLB_MODE_DAC_SERIAL;
+		if (is_sdvo) {
+			dpll |= DPLL_DVO_HIGH_SPEED;
+			if (IS_I945G(dev) || IS_I945GM(dev)) {
+				int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+				dpll |= (sdvo_pixel_multiply - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+			}
+		}
+
+		/* compute bitmask from p1 value */
+		dpll |= (1 << (clock.p1 - 1)) << 16;
+		switch (clock.p2) {
+		case 5:
+			dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+			break;
+		case 7:
+			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+			break;
+		case 10:
+			dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+			break;
+		case 14:
+			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+			break;
+		}
+		if (IS_I965G(dev))
+			dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
+	} else {
+		if (is_lvds) {
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+		} else {
+			if (clock.p1 == 2)
+				dpll |= PLL_P1_DIVIDE_BY_TWO;
+			else
+				dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+			if (clock.p2 == 4)
+				dpll |= PLL_P2_DIVIDE_BY_4;
+		}
+	}
+
+	if (is_tv) {
+		/* XXX: just matching BIOS for now */
+/*	dpll |= PLL_REF_INPUT_TVCLKINBC; */
+		dpll |= 3;
+	}
+	else
+		dpll |= PLL_REF_INPUT_DREFCLK;
+
+	/* setup pipeconf */
+	pipeconf = I915_READ(pipeconf_reg);
+
+	/* Set up the display plane register */
+	dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+	if (pipe == 0)
+		dspcntr |= DISPPLANE_SEL_PIPE_A;
+	else
+		dspcntr |= DISPPLANE_SEL_PIPE_B;
+
+	if (pipe == 0 && !IS_I965G(dev)) {
+		/* Enable pixel doubling when the dot clock is > 90% of the (display)
+		 * core speed.
+		 *
+		 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
+		 * pipe == 0 check?
+		 */
+		if (mode->clock > intel_get_core_clock_speed(dev) * 9 / 10)
+			pipeconf |= PIPEACONF_DOUBLE_WIDE;
+		else
+			pipeconf &= ~PIPEACONF_DOUBLE_WIDE;
+	}
+
+	dspcntr |= DISPLAY_PLANE_ENABLE;
+	pipeconf |= PIPEACONF_ENABLE;
+	dpll |= DPLL_VCO_ENABLE;
+
+
+	/* Disable the panel fitter if it was on our pipe */
+	if (intel_panel_fitter_pipe(dev) == pipe)
+		I915_WRITE(PFIT_CONTROL, 0);
+
+	DRM_DEBUG("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+	drm_mode_debug_printmodeline(mode);
+
+
+	if (dpll & DPLL_VCO_ENABLE) {
+		I915_WRITE(fp_reg, fp);
+		I915_WRITE(dpll_reg, dpll & ~DPLL_VCO_ENABLE);
+		I915_READ(dpll_reg);
+		udelay(150);
+	}
+
+	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
+	 * This is an exception to the general rule that mode_set doesn't turn
+	 * things on.
+	 */
+	if (is_lvds) {
+		u32 lvds = I915_READ(LVDS);
+
+		lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT;
+		/* Set the B0-B3 data pairs corresponding to whether we're going to
+		 * set the DPLLs for dual-channel mode or not.
+		 */
+		if (clock.p2 == 7)
+			lvds |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+		else
+			lvds &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+		/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+		 * appropriately here, but we need to look more thoroughly into how
+		 * panels behave in the two modes.
+		 */
+
+		I915_WRITE(LVDS, lvds);
+		I915_READ(LVDS);
+	}
+
+	I915_WRITE(fp_reg, fp);
+	I915_WRITE(dpll_reg, dpll);
+	I915_READ(dpll_reg);
+	/* Wait for the clocks to stabilize. */
+	udelay(150);
+
+	if (IS_I965G(dev)) {
+		int sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+		I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
+			   ((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+	} else {
+		/* write it again -- the BIOS does, after all */
+		I915_WRITE(dpll_reg, dpll);
+	}
+	I915_READ(dpll_reg);
+	/* Wait for the clocks to stabilize. */
+	udelay(150);
+
+	I915_WRITE(htot_reg, (adjusted_mode->crtc_hdisplay - 1) |
+		   ((adjusted_mode->crtc_htotal - 1) << 16));
+	I915_WRITE(hblank_reg, (adjusted_mode->crtc_hblank_start - 1) |
+		   ((adjusted_mode->crtc_hblank_end - 1) << 16));
+	I915_WRITE(hsync_reg, (adjusted_mode->crtc_hsync_start - 1) |
+		   ((adjusted_mode->crtc_hsync_end - 1) << 16));
+	I915_WRITE(vtot_reg, (adjusted_mode->crtc_vdisplay - 1) |
+		   ((adjusted_mode->crtc_vtotal - 1) << 16));
+	I915_WRITE(vblank_reg, (adjusted_mode->crtc_vblank_start - 1) |
+		   ((adjusted_mode->crtc_vblank_end - 1) << 16));
+	I915_WRITE(vsync_reg, (adjusted_mode->crtc_vsync_start - 1) |
+		   ((adjusted_mode->crtc_vsync_end - 1) << 16));
+	/* pipesrc and dspsize control the size that is scaled from, which should
+	 * always be the user's requested size.
+	 */
+	I915_WRITE(dspsize_reg, ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1));
+	I915_WRITE(dsppos_reg, 0);
+	I915_WRITE(pipesrc_reg, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+	I915_WRITE(pipeconf_reg, pipeconf);
+	I915_READ(pipeconf_reg);
+
+	intel_wait_for_vblank(dev);
+
+	I915_WRITE(dspcntr_reg, dspcntr);
+
+	/* Flush the plane changes */
+	intel_pipe_set_base(crtc, x, y);
+
+	intel_wait_for_vblank(dev);
+
+	drm_vblank_post_modeset(dev, pipe);
+}
+
+/** Loads the palette/gamma unit for the CRTC with the prepared values */
+void intel_crtc_load_lut(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B;
+	int i;
+
+	/* The clocks have to be on to load the palette. */
+	if (!crtc->enabled)
+		return;
+
+	for (i = 0; i < 256; i++) {
+		I915_WRITE(palreg + 4 * i,
+			   (intel_crtc->lut_r[i] << 16) |
+			   (intel_crtc->lut_g[i] << 8) |
+			   intel_crtc->lut_b[i]);
+	}
+}
+
+static int intel_crtc_cursor_set(struct drm_crtc *crtc,
+				 struct drm_file *file_priv,
+				 uint32_t handle,
+				 uint32_t width, uint32_t height)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_gem_object *bo;
+	struct drm_i915_gem_object *obj_priv;
+	int pipe = intel_crtc->pipe;
+	uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
+	uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
+	uint32_t temp;
+	size_t addr;
+
+	DRM_DEBUG("\n");
+
+	/* if we want to turn off the cursor ignore width and height */
+	if (!handle) {
+		DRM_DEBUG("cursor off\n");
+		/* turn of the cursor */
+		temp = 0;
+		temp |= CURSOR_MODE_DISABLE;
+
+		I915_WRITE(control, temp);
+		I915_WRITE(base, 0);
+		return 0;
+	}
+
+	/* Currently we only support 64x64 cursors */
+	if (width != 64 || height != 64) {
+		DRM_ERROR("we currently only support 64x64 cursors\n");
+		return -EINVAL;
+	}
+
+	bo = drm_gem_object_lookup(dev, file_priv, handle);
+	if (!bo)
+		return -ENOENT;
+
+	obj_priv = bo->driver_private;
+
+	if (bo->size < width * height * 4) {
+		DRM_ERROR("buffer is to small\n");
+		drm_gem_object_unreference(bo);
+		return -ENOMEM;
+	}
+
+	if (dev_priv->cursor_needs_physical) {
+		addr = dev->agp->base + obj_priv->gtt_offset;
+	} else {
+		addr = obj_priv->gtt_offset;
+	}
+
+	intel_crtc->cursor_addr = addr;
+	temp = 0;
+	/* set the pipe for the cursor */
+	temp |= (pipe << 28);
+	temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+
+	I915_WRITE(control, temp);
+	I915_WRITE(base, addr);
+
+	return 0;
+}
+
+static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	uint32_t temp = 0;
+	uint32_t adder;
+
+	if (x < 0) {
+		temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
+		x = -x;
+	}
+	if (y < 0) {
+		temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
+		y = -y;
+	}
+
+	temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
+	temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
+
+	adder = intel_crtc->cursor_addr;
+	I915_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
+	I915_WRITE((pipe == 0) ? CURABASE : CURBBASE, adder);
+
+	return 0;
+}
+
+/** Sets the color ramps on behalf of RandR */
+void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+				 u16 blue, int regno)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	intel_crtc->lut_r[regno] = red >> 8;
+	intel_crtc->lut_g[regno] = green >> 8;
+	intel_crtc->lut_b[regno] = blue >> 8;
+}
+
+static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
+				 u16 *blue, uint32_t size)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int i;
+
+	if (size != 256)
+		return;
+
+	for (i = 0; i < 256; i++) {
+		intel_crtc->lut_r[i] = red[i] >> 8;
+		intel_crtc->lut_g[i] = green[i] >> 8;
+		intel_crtc->lut_b[i] = blue[i] >> 8;
+	}
+
+	intel_crtc_load_lut(crtc);
+}
+
+/**
+ * Get a pipe with a simple mode set on it for doing load-based monitor
+ * detection.
+ *
+ * It will be up to the load-detect code to adjust the pipe as appropriate for
+ * its requirements.  The pipe will be connected to no other outputs.
+ *
+ * Currently this code will only succeed if there is a pipe with no outputs
+ * configured for it.  In the future, it could choose to temporarily disable
+ * some outputs to free up a pipe for its use.
+ *
+ * \return crtc, or NULL if no pipes are available.
+ */
+
+/* VESA 640x480x72Hz mode to set on the pipe */
+static struct drm_display_mode load_detect_mode = {
+	DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
+		 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
+};
+
+struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
+					    struct drm_display_mode *mode,
+					    int *dpms_mode)
+{
+	struct intel_crtc *intel_crtc;
+	struct drm_crtc *possible_crtc;
+	struct drm_crtc *supported_crtc =NULL;
+	struct drm_encoder *encoder = &intel_output->enc;
+	struct drm_crtc *crtc = NULL;
+	struct drm_device *dev = encoder->dev;
+	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+	struct drm_crtc_helper_funcs *crtc_funcs;
+	int i = -1;
+
+	/*
+	 * Algorithm gets a little messy:
+	 *   - if the connector already has an assigned crtc, use it (but make
+	 *     sure it's on first)
+	 *   - try to find the first unused crtc that can drive this connector,
+	 *     and use that if we find one
+	 *   - if there are no unused crtcs available, try to use the first
+	 *     one we found that supports the connector
+	 */
+
+	/* See if we already have a CRTC for this connector */
+	if (encoder->crtc) {
+		crtc = encoder->crtc;
+		/* Make sure the crtc and connector are running */
+		intel_crtc = to_intel_crtc(crtc);
+		*dpms_mode = intel_crtc->dpms_mode;
+		if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
+			crtc_funcs = crtc->helper_private;
+			crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+			encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+		}
+		return crtc;
+	}
+
+	/* Find an unused one (if possible) */
+	list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) {
+		i++;
+		if (!(encoder->possible_crtcs & (1 << i)))
+			continue;
+		if (!possible_crtc->enabled) {
+			crtc = possible_crtc;
+			break;
+		}
+		if (!supported_crtc)
+			supported_crtc = possible_crtc;
+	}
+
+	/*
+	 * If we didn't find an unused CRTC, don't use any.
+	 */
+	if (!crtc) {
+		return NULL;
+	}
+
+	encoder->crtc = crtc;
+	intel_output->load_detect_temp = true;
+
+	intel_crtc = to_intel_crtc(crtc);
+	*dpms_mode = intel_crtc->dpms_mode;
+
+	if (!crtc->enabled) {
+		if (!mode)
+			mode = &load_detect_mode;
+		drm_crtc_helper_set_mode(crtc, mode, 0, 0);
+	} else {
+		if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) {
+			crtc_funcs = crtc->helper_private;
+			crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+		}
+
+		/* Add this connector to the crtc */
+		encoder_funcs->mode_set(encoder, &crtc->mode, &crtc->mode);
+		encoder_funcs->commit(encoder);
+	}
+	/* let the connector get through one full cycle before testing */
+	intel_wait_for_vblank(dev);
+
+	return crtc;
+}
+
+void intel_release_load_detect_pipe(struct intel_output *intel_output, int dpms_mode)
+{
+	struct drm_encoder *encoder = &intel_output->enc;
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+	if (intel_output->load_detect_temp) {
+		encoder->crtc = NULL;
+		intel_output->load_detect_temp = false;
+		crtc->enabled = drm_helper_crtc_in_use(crtc);
+		drm_helper_disable_unused_functions(dev);
+	}
+
+	/* Switch crtc and output back off if necessary */
+	if (crtc->enabled && dpms_mode != DRM_MODE_DPMS_ON) {
+		if (encoder->crtc == crtc)
+			encoder_funcs->dpms(encoder, dpms_mode);
+		crtc_funcs->dpms(crtc, dpms_mode);
+	}
+}
+
+/* Returns the clock of the currently programmed mode of the given pipe. */
+static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 dpll = I915_READ((pipe == 0) ? DPLL_A : DPLL_B);
+	u32 fp;
+	intel_clock_t clock;
+
+	if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
+		fp = I915_READ((pipe == 0) ? FPA0 : FPB0);
+	else
+		fp = I915_READ((pipe == 0) ? FPA1 : FPB1);
+
+	clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
+	clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
+	clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
+	if (IS_I9XX(dev)) {
+		clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
+			       DPLL_FPA01_P1_POST_DIV_SHIFT);
+
+		switch (dpll & DPLL_MODE_MASK) {
+		case DPLLB_MODE_DAC_SERIAL:
+			clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
+				5 : 10;
+			break;
+		case DPLLB_MODE_LVDS:
+			clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
+				7 : 14;
+			break;
+		default:
+			DRM_DEBUG("Unknown DPLL mode %08x in programmed "
+				  "mode\n", (int)(dpll & DPLL_MODE_MASK));
+			return 0;
+		}
+
+		/* XXX: Handle the 100Mhz refclk */
+		i9xx_clock(96000, &clock);
+	} else {
+		bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN);
+
+		if (is_lvds) {
+			clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
+				       DPLL_FPA01_P1_POST_DIV_SHIFT);
+			clock.p2 = 14;
+
+			if ((dpll & PLL_REF_INPUT_MASK) ==
+			    PLLB_REF_INPUT_SPREADSPECTRUMIN) {
+				/* XXX: might not be 66MHz */
+				i8xx_clock(66000, &clock);
+			} else
+				i8xx_clock(48000, &clock);
+		} else {
+			if (dpll & PLL_P1_DIVIDE_BY_TWO)
+				clock.p1 = 2;
+			else {
+				clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
+					    DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
+			}
+			if (dpll & PLL_P2_DIVIDE_BY_4)
+				clock.p2 = 4;
+			else
+				clock.p2 = 2;
+
+			i8xx_clock(48000, &clock);
+		}
+	}
+
+	/* XXX: It would be nice to validate the clocks, but we can't reuse
+	 * i830PllIsValid() because it relies on the xf86_config connector
+	 * configuration being accurate, which it isn't necessarily.
+	 */
+
+	return clock.dot;
+}
+
+/** Returns the currently programmed mode of the given pipe. */
+struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
+					     struct drm_crtc *crtc)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	struct drm_display_mode *mode;
+	int htot = I915_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B);
+	int hsync = I915_READ((pipe == 0) ? HSYNC_A : HSYNC_B);
+	int vtot = I915_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B);
+	int vsync = I915_READ((pipe == 0) ? VSYNC_A : VSYNC_B);
+
+	mode = kzalloc(sizeof(*mode), GFP_KERNEL);
+	if (!mode)
+		return NULL;
+
+	mode->clock = intel_crtc_clock_get(dev, crtc);
+	mode->hdisplay = (htot & 0xffff) + 1;
+	mode->htotal = ((htot & 0xffff0000) >> 16) + 1;
+	mode->hsync_start = (hsync & 0xffff) + 1;
+	mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1;
+	mode->vdisplay = (vtot & 0xffff) + 1;
+	mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1;
+	mode->vsync_start = (vsync & 0xffff) + 1;
+	mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1;
+
+	drm_mode_set_name(mode);
+	drm_mode_set_crtcinfo(mode, 0);
+
+	return mode;
+}
+
+static void intel_crtc_destroy(struct drm_crtc *crtc)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	drm_crtc_cleanup(crtc);
+	kfree(intel_crtc);
+}
+
+static const struct drm_crtc_helper_funcs intel_helper_funcs = {
+	.dpms = intel_crtc_dpms,
+	.mode_fixup = intel_crtc_mode_fixup,
+	.mode_set = intel_crtc_mode_set,
+	.mode_set_base = intel_pipe_set_base,
+	.prepare = intel_crtc_prepare,
+	.commit = intel_crtc_commit,
+};
+
+static const struct drm_crtc_funcs intel_crtc_funcs = {
+	.cursor_set = intel_crtc_cursor_set,
+	.cursor_move = intel_crtc_cursor_move,
+	.gamma_set = intel_crtc_gamma_set,
+	.set_config = drm_crtc_helper_set_config,
+	.destroy = intel_crtc_destroy,
+};
+
+
+void intel_crtc_init(struct drm_device *dev, int pipe)
+{
+	struct intel_crtc *intel_crtc;
+	int i;
+
+	intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL);
+	if (intel_crtc == NULL)
+		return;
+
+	drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs);
+
+	drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256);
+	intel_crtc->pipe = pipe;
+	for (i = 0; i < 256; i++) {
+		intel_crtc->lut_r[i] = i;
+		intel_crtc->lut_g[i] = i;
+		intel_crtc->lut_b[i] = i;
+	}
+
+	intel_crtc->cursor_addr = 0;
+	intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF;
+	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
+
+	intel_crtc->mode_set.crtc = &intel_crtc->base;
+	intel_crtc->mode_set.connectors = (struct drm_connector **)(intel_crtc + 1);
+	intel_crtc->mode_set.num_connectors = 0;
+
+	if (i915_fbpercrtc) {
+
+
+
+	}
+}
+
+struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
+{
+	struct drm_crtc *crtc = NULL;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+		if (intel_crtc->pipe == pipe)
+			break;
+	}
+	return crtc;
+}
+
+int intel_connector_clones(struct drm_device *dev, int type_mask)
+{
+	int index_mask = 0;
+	struct drm_connector *connector;
+	int entry = 0;
+
+        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		struct intel_output *intel_output = to_intel_output(connector);
+		if (type_mask & (1 << intel_output->type))
+			index_mask |= (1 << entry);
+		entry++;
+	}
+	return index_mask;
+}
+
+
+static void intel_setup_outputs(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+
+	intel_crt_init(dev);
+
+	/* Set up integrated LVDS */
+	if (IS_MOBILE(dev) && !IS_I830(dev))
+		intel_lvds_init(dev);
+
+	if (IS_I9XX(dev)) {
+		intel_sdvo_init(dev, SDVOB);
+		intel_sdvo_init(dev, SDVOC);
+	} else
+		intel_dvo_init(dev);
+
+	if (IS_I9XX(dev) && !IS_I915G(dev))
+		intel_tv_init(dev);
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		struct intel_output *intel_output = to_intel_output(connector);
+		struct drm_encoder *encoder = &intel_output->enc;
+		int crtc_mask = 0, clone_mask = 0;
+
+		/* valid crtcs */
+		switch(intel_output->type) {
+		case INTEL_OUTPUT_DVO:
+		case INTEL_OUTPUT_SDVO:
+			crtc_mask = ((1 << 0)|
+				     (1 << 1));
+			clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
+				      (1 << INTEL_OUTPUT_DVO) |
+				      (1 << INTEL_OUTPUT_SDVO));
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			crtc_mask = ((1 << 0)|
+				     (1 << 1));
+			clone_mask = ((1 << INTEL_OUTPUT_ANALOG) |
+				      (1 << INTEL_OUTPUT_DVO) |
+				      (1 << INTEL_OUTPUT_SDVO));
+			break;
+		case INTEL_OUTPUT_LVDS:
+			crtc_mask = (1 << 1);
+			clone_mask = (1 << INTEL_OUTPUT_LVDS);
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			crtc_mask = ((1 << 0) |
+				     (1 << 1));
+			clone_mask = (1 << INTEL_OUTPUT_TVOUT);
+			break;
+		}
+		encoder->possible_crtcs = crtc_mask;
+		encoder->possible_clones = intel_connector_clones(dev, clone_mask);
+	}
+}
+
+static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
+{
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_device *dev = fb->dev;
+
+	if (fb->fbdev)
+		intelfb_remove(dev, fb);
+
+	drm_framebuffer_cleanup(fb);
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_unreference(intel_fb->obj);
+	mutex_unlock(&dev->struct_mutex);
+
+	kfree(intel_fb);
+}
+
+static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
+						struct drm_file *file_priv,
+						unsigned int *handle)
+{
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_gem_object *object = intel_fb->obj;
+
+	return drm_gem_handle_create(file_priv, object, handle);
+}
+
+static const struct drm_framebuffer_funcs intel_fb_funcs = {
+	.destroy = intel_user_framebuffer_destroy,
+	.create_handle = intel_user_framebuffer_create_handle,
+};
+
+int intel_framebuffer_create(struct drm_device *dev,
+			     struct drm_mode_fb_cmd *mode_cmd,
+			     struct drm_framebuffer **fb,
+			     struct drm_gem_object *obj)
+{
+	struct intel_framebuffer *intel_fb;
+	int ret;
+
+	intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
+	if (!intel_fb)
+		return -ENOMEM;
+
+	ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
+	if (ret) {
+		DRM_ERROR("framebuffer init failed %d\n", ret);
+		return ret;
+	}
+
+	drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
+
+	intel_fb->obj = obj;
+
+	*fb = &intel_fb->base;
+
+	return 0;
+}
+
+
+static struct drm_framebuffer *
+intel_user_framebuffer_create(struct drm_device *dev,
+			      struct drm_file *filp,
+			      struct drm_mode_fb_cmd *mode_cmd)
+{
+	struct drm_gem_object *obj;
+	struct drm_framebuffer *fb;
+	int ret;
+
+	obj = drm_gem_object_lookup(dev, filp, mode_cmd->handle);
+	if (!obj)
+		return NULL;
+
+	ret = intel_framebuffer_create(dev, mode_cmd, &fb, obj);
+	if (ret) {
+		drm_gem_object_unreference(obj);
+		return NULL;
+	}
+
+	return fb;
+}
+
+static int intel_insert_new_fb(struct drm_device *dev,
+			       struct drm_file *file_priv,
+			       struct drm_framebuffer *fb,
+			       struct drm_mode_fb_cmd *mode_cmd)
+{
+	struct intel_framebuffer *intel_fb;
+	struct drm_gem_object *obj;
+	struct drm_crtc *crtc;
+
+	intel_fb = to_intel_framebuffer(fb);
+
+	obj = drm_gem_object_lookup(dev, file_priv, mode_cmd->handle);
+
+	if (!obj)
+		return -EINVAL;
+
+	intel_fb->obj = obj;
+	drm_gem_object_unreference(intel_fb->obj);
+	drm_helper_mode_fill_fb_struct(fb, mode_cmd);
+	mutex_unlock(&dev->struct_mutex);
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		if (crtc->fb == fb) {
+			struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+			crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y);
+		}
+	}
+	return 0;
+}
+
+static const struct drm_mode_config_funcs intel_mode_funcs = {
+	.resize_fb = intel_insert_new_fb,
+	.fb_create = intel_user_framebuffer_create,
+	.fb_changed = intelfb_probe,
+};
+
+void intel_modeset_init(struct drm_device *dev)
+{
+	int num_pipe;
+	int i;
+
+	drm_mode_config_init(dev);
+
+	dev->mode_config.min_width = 0;
+	dev->mode_config.min_height = 0;
+
+	dev->mode_config.funcs = (void *)&intel_mode_funcs;
+
+	if (IS_I965G(dev)) {
+		dev->mode_config.max_width = 8192;
+		dev->mode_config.max_height = 8192;
+	} else {
+		dev->mode_config.max_width = 2048;
+		dev->mode_config.max_height = 2048;
+	}
+
+	/* set memory base */
+	if (IS_I9XX(dev))
+		dev->mode_config.fb_base = pci_resource_start(dev->pdev, 2);
+	else
+		dev->mode_config.fb_base = pci_resource_start(dev->pdev, 0);
+
+	if (IS_MOBILE(dev) || IS_I9XX(dev))
+		num_pipe = 2;
+	else
+		num_pipe = 1;
+	DRM_DEBUG("%d display pipe%s available.\n",
+		  num_pipe, num_pipe > 1 ? "s" : "");
+
+	for (i = 0; i < num_pipe; i++) {
+		intel_crtc_init(dev, i);
+	}
+
+	intel_setup_outputs(dev);
+}
+
+void intel_modeset_cleanup(struct drm_device *dev)
+{
+	drm_mode_config_cleanup(dev);
+}
+
+
+/* current intel driver doesn't take advantage of encoders
+   always give back the encoder for the connector
+*/
+struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	return &intel_output->enc;
+}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
new file mode 100644
index 00000000000..407edd5bf58
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -0,0 +1,146 @@
+/*
+ * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
+ * Copyright (c) 2007-2008 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+#ifndef __INTEL_DRV_H__
+#define __INTEL_DRV_H__
+
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/i2c-algo-bit.h>
+#include "drm_crtc.h"
+
+#include "drm_crtc_helper.h"
+/*
+ * Display related stuff
+ */
+
+/* store information about an Ixxx DVO */
+/* The i830->i865 use multiple DVOs with multiple i2cs */
+/* the i915, i945 have a single sDVO i2c bus - which is different */
+#define MAX_OUTPUTS 6
+/* maximum connectors per crtcs in the mode set */
+#define INTELFB_CONN_LIMIT 4
+
+#define INTEL_I2C_BUS_DVO 1
+#define INTEL_I2C_BUS_SDVO 2
+
+/* these are outputs from the chip - integrated only
+   external chips are via DVO or SDVO output */
+#define INTEL_OUTPUT_UNUSED 0
+#define INTEL_OUTPUT_ANALOG 1
+#define INTEL_OUTPUT_DVO 2
+#define INTEL_OUTPUT_SDVO 3
+#define INTEL_OUTPUT_LVDS 4
+#define INTEL_OUTPUT_TVOUT 5
+
+#define INTEL_DVO_CHIP_NONE 0
+#define INTEL_DVO_CHIP_LVDS 1
+#define INTEL_DVO_CHIP_TMDS 2
+#define INTEL_DVO_CHIP_TVOUT 4
+
+struct intel_i2c_chan {
+	struct drm_device *drm_dev; /* for getting at dev. private (mmio etc.) */
+	u32 reg; /* GPIO reg */
+	struct i2c_adapter adapter;
+	struct i2c_algo_bit_data algo;
+        u8 slave_addr;
+};
+
+struct intel_framebuffer {
+	struct drm_framebuffer base;
+	struct drm_gem_object *obj;
+};
+
+
+struct intel_output {
+	struct drm_connector base;
+
+	struct drm_encoder enc;
+	int type;
+	struct intel_i2c_chan *i2c_bus; /* for control functions */
+	struct intel_i2c_chan *ddc_bus; /* for DDC only stuff */
+	bool load_detect_temp;
+	void *dev_priv;
+};
+
+struct intel_crtc {
+	struct drm_crtc base;
+	int pipe;
+	int plane;
+	uint32_t cursor_addr;
+	u8 lut_r[256], lut_g[256], lut_b[256];
+	int dpms_mode;
+	struct intel_framebuffer *fbdev_fb;
+	/* a mode_set for fbdev users on this crtc */
+	struct drm_mode_set mode_set;
+};
+
+#define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
+#define to_intel_output(x) container_of(x, struct intel_output, base)
+#define enc_to_intel_output(x) container_of(x, struct intel_output, enc)
+#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
+
+struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
+					const char *name);
+void intel_i2c_destroy(struct intel_i2c_chan *chan);
+int intel_ddc_get_modes(struct intel_output *intel_output);
+extern bool intel_ddc_probe(struct intel_output *intel_output);
+
+extern void intel_crt_init(struct drm_device *dev);
+extern void intel_sdvo_init(struct drm_device *dev, int output_device);
+extern void intel_dvo_init(struct drm_device *dev);
+extern void intel_tv_init(struct drm_device *dev);
+extern void intel_lvds_init(struct drm_device *dev);
+
+extern void intel_crtc_load_lut(struct drm_crtc *crtc);
+extern void intel_encoder_prepare (struct drm_encoder *encoder);
+extern void intel_encoder_commit (struct drm_encoder *encoder);
+
+extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector);
+
+extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
+						    struct drm_crtc *crtc);
+extern void intel_wait_for_vblank(struct drm_device *dev);
+extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
+extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
+						   struct drm_display_mode *mode,
+						   int *dpms_mode);
+extern void intel_release_load_detect_pipe(struct intel_output *intel_output,
+					   int dpms_mode);
+
+extern struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB);
+extern int intel_sdvo_supports_hotplug(struct drm_connector *connector);
+extern void intel_sdvo_set_hotplug(struct drm_connector *connector, int enable);
+extern int intelfb_probe(struct drm_device *dev);
+extern int intelfb_remove(struct drm_device *dev, struct drm_framebuffer *fb);
+extern int intelfb_resize(struct drm_device *dev, struct drm_crtc *crtc);
+extern void intelfb_restore(void);
+extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+				    u16 blue, int regno);
+
+extern int intel_framebuffer_create(struct drm_device *dev,
+				    struct drm_mode_fb_cmd *mode_cmd,
+				    struct drm_framebuffer **fb,
+				    struct drm_gem_object *obj);
+#endif /* __INTEL_DRV_H__ */
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
new file mode 100644
index 00000000000..008bfaed461
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -0,0 +1,501 @@
+/*
+ * Copyright 2006 Dave Airlie <airlied@linux.ie>
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "dvo.h"
+
+#define SIL164_ADDR	0x38
+#define CH7xxx_ADDR	0x76
+#define TFP410_ADDR	0x38
+
+extern struct intel_dvo_dev_ops sil164_ops;
+extern struct intel_dvo_dev_ops ch7xxx_ops;
+extern struct intel_dvo_dev_ops ivch_ops;
+extern struct intel_dvo_dev_ops tfp410_ops;
+extern struct intel_dvo_dev_ops ch7017_ops;
+
+struct intel_dvo_device intel_dvo_devices[] = {
+	{
+		.type = INTEL_DVO_CHIP_TMDS,
+		.name = "sil164",
+		.dvo_reg = DVOC,
+		.slave_addr = SIL164_ADDR,
+		.dev_ops = &sil164_ops,
+	},
+	{
+		.type = INTEL_DVO_CHIP_TMDS,
+		.name = "ch7xxx",
+		.dvo_reg = DVOC,
+		.slave_addr = CH7xxx_ADDR,
+		.dev_ops = &ch7xxx_ops,
+	},
+	{
+		.type = INTEL_DVO_CHIP_LVDS,
+		.name = "ivch",
+		.dvo_reg = DVOA,
+		.slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */
+		.dev_ops = &ivch_ops,
+	},
+	{
+		.type = INTEL_DVO_CHIP_TMDS,
+		.name = "tfp410",
+		.dvo_reg = DVOC,
+		.slave_addr = TFP410_ADDR,
+		.dev_ops = &tfp410_ops,
+	},
+	{
+		.type = INTEL_DVO_CHIP_LVDS,
+		.name = "ch7017",
+		.dvo_reg = DVOC,
+		.slave_addr = 0x75,
+		.gpio = GPIOE,
+		.dev_ops = &ch7017_ops,
+	}
+};
+
+static void intel_dvo_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_i915_private *dev_priv = encoder->dev->dev_private;
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	u32 dvo_reg = dvo->dvo_reg;
+	u32 temp = I915_READ(dvo_reg);
+
+	if (mode == DRM_MODE_DPMS_ON) {
+		I915_WRITE(dvo_reg, temp | DVO_ENABLE);
+		I915_READ(dvo_reg);
+		dvo->dev_ops->dpms(dvo, mode);
+	} else {
+		dvo->dev_ops->dpms(dvo, mode);
+		I915_WRITE(dvo_reg, temp & ~DVO_ENABLE);
+		I915_READ(dvo_reg);
+	}
+}
+
+static void intel_dvo_save(struct drm_connector *connector)
+{
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+
+	/* Each output should probably just save the registers it touches,
+	 * but for now, use more overkill.
+	 */
+	dev_priv->saveDVOA = I915_READ(DVOA);
+	dev_priv->saveDVOB = I915_READ(DVOB);
+	dev_priv->saveDVOC = I915_READ(DVOC);
+
+	dvo->dev_ops->save(dvo);
+}
+
+static void intel_dvo_restore(struct drm_connector *connector)
+{
+	struct drm_i915_private *dev_priv = connector->dev->dev_private;
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+
+	dvo->dev_ops->restore(dvo);
+
+	I915_WRITE(DVOA, dev_priv->saveDVOA);
+	I915_WRITE(DVOB, dev_priv->saveDVOB);
+	I915_WRITE(DVOC, dev_priv->saveDVOC);
+}
+
+static int intel_dvo_mode_valid(struct drm_connector *connector,
+				struct drm_display_mode *mode)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	/* XXX: Validate clock range */
+
+	if (dvo->panel_fixed_mode) {
+		if (mode->hdisplay > dvo->panel_fixed_mode->hdisplay)
+			return MODE_PANEL;
+		if (mode->vdisplay > dvo->panel_fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+
+	return dvo->dev_ops->mode_valid(dvo, mode);
+}
+
+static bool intel_dvo_mode_fixup(struct drm_encoder *encoder,
+				 struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode)
+{
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+
+	/* If we have timings from the BIOS for the panel, put them in
+	 * to the adjusted mode.  The CRTC will be set up for this mode,
+	 * with the panel scaling set up to source from the H/VDisplay
+	 * of the original mode.
+	 */
+	if (dvo->panel_fixed_mode != NULL) {
+#define C(x) adjusted_mode->x = dvo->panel_fixed_mode->x
+		C(hdisplay);
+		C(hsync_start);
+		C(hsync_end);
+		C(htotal);
+		C(vdisplay);
+		C(vsync_start);
+		C(vsync_end);
+		C(vtotal);
+		C(clock);
+		drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
+#undef C
+	}
+
+	if (dvo->dev_ops->mode_fixup)
+		return dvo->dev_ops->mode_fixup(dvo, mode, adjusted_mode);
+
+	return true;
+}
+
+static void intel_dvo_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	int pipe = intel_crtc->pipe;
+	u32 dvo_val;
+	u32 dvo_reg = dvo->dvo_reg, dvo_srcdim_reg;
+	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+
+	switch (dvo_reg) {
+	case DVOA:
+	default:
+		dvo_srcdim_reg = DVOA_SRCDIM;
+		break;
+	case DVOB:
+		dvo_srcdim_reg = DVOB_SRCDIM;
+		break;
+	case DVOC:
+		dvo_srcdim_reg = DVOC_SRCDIM;
+		break;
+	}
+
+	dvo->dev_ops->mode_set(dvo, mode, adjusted_mode);
+
+	/* Save the data order, since I don't know what it should be set to. */
+	dvo_val = I915_READ(dvo_reg) &
+		  (DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG);
+	dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE |
+		   DVO_BLANK_ACTIVE_HIGH;
+
+	if (pipe == 1)
+		dvo_val |= DVO_PIPE_B_SELECT;
+	dvo_val |= DVO_PIPE_STALL;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		dvo_val |= DVO_HSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		dvo_val |= DVO_VSYNC_ACTIVE_HIGH;
+
+	I915_WRITE(dpll_reg, I915_READ(dpll_reg) | DPLL_DVO_HIGH_SPEED);
+
+	/*I915_WRITE(DVOB_SRCDIM,
+	  (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
+	  (adjusted_mode->VDisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/
+	I915_WRITE(dvo_srcdim_reg,
+		   (adjusted_mode->hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
+		   (adjusted_mode->vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));
+	/*I915_WRITE(DVOB, dvo_val);*/
+	I915_WRITE(dvo_reg, dvo_val);
+}
+
+/**
+ * Detect the output connection on our DVO device.
+ *
+ * Unimplemented.
+ */
+static enum drm_connector_status intel_dvo_detect(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+
+	return dvo->dev_ops->detect(dvo);
+}
+
+static int intel_dvo_get_modes(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+
+	/* We should probably have an i2c driver get_modes function for those
+	 * devices which will have a fixed set of modes determined by the chip
+	 * (TV-out, for example), but for now with just TMDS and LVDS,
+	 * that's not the case.
+	 */
+	intel_ddc_get_modes(intel_output);
+	if (!list_empty(&connector->probed_modes))
+		return 1;
+
+
+	if (dvo->panel_fixed_mode != NULL) {
+		struct drm_display_mode *mode;
+		mode = drm_mode_duplicate(connector->dev, dvo->panel_fixed_mode);
+		if (mode) {
+			drm_mode_probed_add(connector, mode);
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static void intel_dvo_destroy (struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+
+	if (dvo) {
+		if (dvo->dev_ops->destroy)
+			dvo->dev_ops->destroy(dvo);
+		if (dvo->panel_fixed_mode)
+			kfree(dvo->panel_fixed_mode);
+		/* no need, in i830_dvoices[] now */
+		//kfree(dvo);
+	}
+	if (intel_output->i2c_bus)
+		intel_i2c_destroy(intel_output->i2c_bus);
+	if (intel_output->ddc_bus)
+		intel_i2c_destroy(intel_output->ddc_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(intel_output);
+}
+
+#ifdef RANDR_GET_CRTC_INTERFACE
+static struct drm_crtc *intel_dvo_get_crtc(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	int pipe = !!(I915_READ(dvo->dvo_reg) & SDVO_PIPE_B_SELECT);
+
+	return intel_pipe_to_crtc(pScrn, pipe);
+}
+#endif
+
+static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = {
+	.dpms = intel_dvo_dpms,
+	.mode_fixup = intel_dvo_mode_fixup,
+	.prepare = intel_encoder_prepare,
+	.mode_set = intel_dvo_mode_set,
+	.commit = intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs intel_dvo_connector_funcs = {
+	.save = intel_dvo_save,
+	.restore = intel_dvo_restore,
+	.detect = intel_dvo_detect,
+	.destroy = intel_dvo_destroy,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+};
+
+static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = {
+	.mode_valid = intel_dvo_mode_valid,
+	.get_modes = intel_dvo_get_modes,
+	.best_encoder = intel_best_encoder,
+};
+
+void intel_dvo_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs intel_dvo_enc_funcs = {
+	.destroy = intel_dvo_enc_destroy,
+};
+
+
+/**
+ * Attempts to get a fixed panel timing for LVDS (currently only the i830).
+ *
+ * Other chips with DVO LVDS will need to extend this to deal with the LVDS
+ * chip being on DVOB/C and having multiple pipes.
+ */
+static struct drm_display_mode *
+intel_dvo_get_current_mode (struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_dvo_device *dvo = intel_output->dev_priv;
+	uint32_t dvo_reg = dvo->dvo_reg;
+	uint32_t dvo_val = I915_READ(dvo_reg);
+	struct drm_display_mode *mode = NULL;
+
+	/* If the DVO port is active, that'll be the LVDS, so we can pull out
+	 * its timings to get how the BIOS set up the panel.
+	 */
+	if (dvo_val & DVO_ENABLE) {
+		struct drm_crtc *crtc;
+		int pipe = (dvo_val & DVO_PIPE_B_SELECT) ? 1 : 0;
+
+		crtc = intel_get_crtc_from_pipe(dev, pipe);
+		if (crtc) {
+			mode = intel_crtc_mode_get(dev, crtc);
+
+			if (mode) {
+				mode->type |= DRM_MODE_TYPE_PREFERRED;
+				if (dvo_val & DVO_HSYNC_ACTIVE_HIGH)
+					mode->flags |= DRM_MODE_FLAG_PHSYNC;
+				if (dvo_val & DVO_VSYNC_ACTIVE_HIGH)
+					mode->flags |= DRM_MODE_FLAG_PVSYNC;
+			}
+		}
+	}
+	return mode;
+}
+
+void intel_dvo_init(struct drm_device *dev)
+{
+	struct intel_output *intel_output;
+	struct intel_dvo_device *dvo;
+	struct intel_i2c_chan *i2cbus = NULL;
+	int ret = 0;
+	int i;
+	int gpio_inited = 0;
+	int encoder_type = DRM_MODE_ENCODER_NONE;
+	intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL);
+	if (!intel_output)
+		return;
+
+	/* Set up the DDC bus */
+	intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "DVODDC_D");
+	if (!intel_output->ddc_bus)
+		goto free_intel;
+
+	/* Now, try to find a controller */
+	for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
+		struct drm_connector *connector = &intel_output->base;
+		int gpio;
+
+		dvo = &intel_dvo_devices[i];
+
+		/* Allow the I2C driver info to specify the GPIO to be used in
+		 * special cases, but otherwise default to what's defined
+		 * in the spec.
+		 */
+		if (dvo->gpio != 0)
+			gpio = dvo->gpio;
+		else if (dvo->type == INTEL_DVO_CHIP_LVDS)
+			gpio = GPIOB;
+		else
+			gpio = GPIOE;
+
+		/* Set up the I2C bus necessary for the chip we're probing.
+		 * It appears that everything is on GPIOE except for panels
+		 * on i830 laptops, which are on GPIOB (DVOA).
+		 */
+		if (gpio_inited != gpio) {
+			if (i2cbus != NULL)
+				intel_i2c_destroy(i2cbus);
+			if (!(i2cbus = intel_i2c_create(dev, gpio,
+				gpio == GPIOB ? "DVOI2C_B" : "DVOI2C_E"))) {
+				continue;
+			}
+			gpio_inited = gpio;
+		}
+
+		if (dvo->dev_ops!= NULL)
+			ret = dvo->dev_ops->init(dvo, i2cbus);
+		else
+			ret = false;
+
+		if (!ret)
+			continue;
+
+		intel_output->type = INTEL_OUTPUT_DVO;
+		switch (dvo->type) {
+		case INTEL_DVO_CHIP_TMDS:
+			drm_connector_init(dev, connector,
+					   &intel_dvo_connector_funcs,
+					   DRM_MODE_CONNECTOR_DVII);
+			encoder_type = DRM_MODE_ENCODER_TMDS;
+			break;
+		case INTEL_DVO_CHIP_LVDS:
+			drm_connector_init(dev, connector,
+					   &intel_dvo_connector_funcs,
+					   DRM_MODE_CONNECTOR_LVDS);
+			encoder_type = DRM_MODE_ENCODER_LVDS;
+			break;
+		}
+
+		drm_connector_helper_add(connector,
+					 &intel_dvo_connector_helper_funcs);
+		connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+		connector->interlace_allowed = false;
+		connector->doublescan_allowed = false;
+
+		intel_output->dev_priv = dvo;
+		intel_output->i2c_bus = i2cbus;
+
+		drm_encoder_init(dev, &intel_output->enc,
+				 &intel_dvo_enc_funcs, encoder_type);
+		drm_encoder_helper_add(&intel_output->enc,
+				       &intel_dvo_helper_funcs);
+
+		drm_mode_connector_attach_encoder(&intel_output->base,
+						  &intel_output->enc);
+		if (dvo->type == INTEL_DVO_CHIP_LVDS) {
+			/* For our LVDS chipsets, we should hopefully be able
+			 * to dig the fixed panel mode out of the BIOS data.
+			 * However, it's in a different format from the BIOS
+			 * data on chipsets with integrated LVDS (stored in AIM
+			 * headers, likely), so for now, just get the current
+			 * mode being output through DVO.
+			 */
+			dvo->panel_fixed_mode =
+				intel_dvo_get_current_mode(connector);
+			dvo->panel_wants_dither = true;
+		}
+
+		drm_sysfs_connector_add(connector);
+		return;
+	}
+
+	intel_i2c_destroy(intel_output->ddc_bus);
+	/* Didn't find a chip, so tear down. */
+	if (i2cbus != NULL)
+		intel_i2c_destroy(i2cbus);
+free_intel:
+	kfree(intel_output);
+}
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
new file mode 100644
index 00000000000..a89ebea7b76
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -0,0 +1,926 @@
+/*
+ * Copyright © 2007 David Airlie
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *     David Airlie
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+struct intelfb_par {
+	struct drm_device *dev;
+	struct drm_display_mode *our_mode;
+	struct intel_framebuffer *intel_fb;
+	int crtc_count;
+	/* crtc currently bound to this */
+	uint32_t crtc_ids[2];
+};
+
+static int intelfb_setcolreg(unsigned regno, unsigned red, unsigned green,
+			unsigned blue, unsigned transp,
+			struct fb_info *info)
+{
+	struct intelfb_par *par = info->par;
+	struct drm_device *dev = par->dev;
+	struct drm_crtc *crtc;
+	int i;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+		struct drm_mode_set *modeset = &intel_crtc->mode_set;
+		struct drm_framebuffer *fb = modeset->fb;
+
+		for (i = 0; i < par->crtc_count; i++)
+			if (crtc->base.id == par->crtc_ids[i])
+				break;
+
+		if (i == par->crtc_count)
+			continue;
+
+
+		if (regno > 255)
+			return 1;
+
+		if (fb->depth == 8) {
+			intel_crtc_fb_gamma_set(crtc, red, green, blue, regno);
+			return 0;
+		}
+
+		if (regno < 16) {
+			switch (fb->depth) {
+			case 15:
+				fb->pseudo_palette[regno] = ((red & 0xf800) >> 1) |
+					((green & 0xf800) >>  6) |
+					((blue & 0xf800) >> 11);
+				break;
+			case 16:
+				fb->pseudo_palette[regno] = (red & 0xf800) |
+					((green & 0xfc00) >>  5) |
+					((blue  & 0xf800) >> 11);
+				break;
+			case 24:
+			case 32:
+				fb->pseudo_palette[regno] = ((red & 0xff00) << 8) |
+					(green & 0xff00) |
+					((blue  & 0xff00) >> 8);
+				break;
+			}
+		}
+	}
+	return 0;
+}
+
+static int intelfb_check_var(struct fb_var_screeninfo *var,
+			struct fb_info *info)
+{
+	struct intelfb_par *par = info->par;
+	struct intel_framebuffer *intel_fb = par->intel_fb;
+	struct drm_framebuffer *fb = &intel_fb->base;
+	int depth;
+
+	if (var->pixclock == -1 || !var->pixclock)
+		return -EINVAL;
+
+	/* Need to resize the fb object !!! */
+	if (var->xres > fb->width || var->yres > fb->height) {
+		DRM_ERROR("Requested width/height is greater than current fb object %dx%d > %dx%d\n",var->xres,var->yres,fb->width,fb->height);
+		DRM_ERROR("Need resizing code.\n");
+		return -EINVAL;
+	}
+
+	switch (var->bits_per_pixel) {
+	case 16:
+		depth = (var->green.length == 6) ? 16 : 15;
+		break;
+	case 32:
+		depth = (var->transp.length > 0) ? 32 : 24;
+		break;
+	default:
+		depth = var->bits_per_pixel;
+		break;
+	}
+
+	switch (depth) {
+	case 8:
+		var->red.offset = 0;
+		var->green.offset = 0;
+		var->blue.offset = 0;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		break;
+	case 15:
+		var->red.offset = 10;
+		var->green.offset = 5;
+		var->blue.offset = 0;
+		var->red.length = 5;
+		var->green.length = 5;
+		var->blue.length = 5;
+		var->transp.length = 1;
+		var->transp.offset = 15;
+		break;
+	case 16:
+		var->red.offset = 11;
+		var->green.offset = 5;
+		var->blue.offset = 0;
+		var->red.length = 5;
+		var->green.length = 6;
+		var->blue.length = 5;
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		break;
+	case 24:
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		break;
+	case 32:
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		var->transp.length = 8;
+		var->transp.offset = 24;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* this will let fbcon do the mode init */
+/* FIXME: take mode config lock? */
+static int intelfb_set_par(struct fb_info *info)
+{
+	struct intelfb_par *par = info->par;
+	struct drm_device *dev = par->dev;
+	struct fb_var_screeninfo *var = &info->var;
+	int i;
+
+	DRM_DEBUG("%d %d\n", var->xres, var->pixclock);
+
+	if (var->pixclock != -1) {
+
+		DRM_ERROR("PIXEL CLCOK SET\n");
+		return -EINVAL;
+	} else {
+		struct drm_crtc *crtc;
+		int ret;
+
+		list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+			struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+			for (i = 0; i < par->crtc_count; i++)
+				if (crtc->base.id == par->crtc_ids[i])
+					break;
+
+			if (i == par->crtc_count)
+				continue;
+
+			if (crtc->fb == intel_crtc->mode_set.fb) {
+				mutex_lock(&dev->mode_config.mutex);
+				ret = crtc->funcs->set_config(&intel_crtc->mode_set);
+				mutex_unlock(&dev->mode_config.mutex);
+				if (ret)
+					return ret;
+			}
+		}
+		return 0;
+	}
+}
+
+static int intelfb_pan_display(struct fb_var_screeninfo *var,
+				struct fb_info *info)
+{
+	struct intelfb_par *par = info->par;
+	struct drm_device *dev = par->dev;
+	struct drm_mode_set *modeset;
+	struct drm_crtc *crtc;
+	struct intel_crtc *intel_crtc;
+	int ret = 0;
+	int i;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		for (i = 0; i < par->crtc_count; i++)
+			if (crtc->base.id == par->crtc_ids[i])
+				break;
+
+		if (i == par->crtc_count)
+			continue;
+
+		intel_crtc = to_intel_crtc(crtc);
+		modeset = &intel_crtc->mode_set;
+
+		modeset->x = var->xoffset;
+		modeset->y = var->yoffset;
+
+		if (modeset->num_connectors) {
+			mutex_lock(&dev->mode_config.mutex);
+			ret = crtc->funcs->set_config(modeset);
+			mutex_unlock(&dev->mode_config.mutex);
+			if (!ret) {
+				info->var.xoffset = var->xoffset;
+				info->var.yoffset = var->yoffset;
+			}
+		}
+	}
+
+	return ret;
+}
+
+static void intelfb_on(struct fb_info *info)
+{
+	struct intelfb_par *par = info->par;
+	struct drm_device *dev = par->dev;
+	struct drm_crtc *crtc;
+	struct drm_encoder *encoder;
+	int i;
+
+	/*
+	 * For each CRTC in this fb, find all associated encoders
+	 * and turn them off, then turn off the CRTC.
+	 */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+		for (i = 0; i < par->crtc_count; i++)
+			if (crtc->base.id == par->crtc_ids[i])
+				break;
+
+		crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+
+		/* Found a CRTC on this fb, now find encoders */
+		list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+			if (encoder->crtc == crtc) {
+				struct drm_encoder_helper_funcs *encoder_funcs;
+				encoder_funcs = encoder->helper_private;
+				encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+			}
+		}
+	}
+}
+
+static void intelfb_off(struct fb_info *info, int dpms_mode)
+{
+	struct intelfb_par *par = info->par;
+	struct drm_device *dev = par->dev;
+	struct drm_crtc *crtc;
+	struct drm_encoder *encoder;
+	int i;
+
+	/*
+	 * For each CRTC in this fb, find all associated encoders
+	 * and turn them off, then turn off the CRTC.
+	 */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+		for (i = 0; i < par->crtc_count; i++)
+			if (crtc->base.id == par->crtc_ids[i])
+				break;
+
+		/* Found a CRTC on this fb, now find encoders */
+		list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+			if (encoder->crtc == crtc) {
+				struct drm_encoder_helper_funcs *encoder_funcs;
+				encoder_funcs = encoder->helper_private;
+				encoder_funcs->dpms(encoder, dpms_mode);
+			}
+		}
+		if (dpms_mode == DRM_MODE_DPMS_OFF)
+			crtc_funcs->dpms(crtc, dpms_mode);
+	}
+}
+
+int intelfb_blank(int blank, struct fb_info *info)
+{
+	switch (blank) {
+	case FB_BLANK_UNBLANK:
+		intelfb_on(info);
+		break;
+	case FB_BLANK_NORMAL:
+		intelfb_off(info, DRM_MODE_DPMS_STANDBY);
+		break;
+	case FB_BLANK_HSYNC_SUSPEND:
+		intelfb_off(info, DRM_MODE_DPMS_STANDBY);
+		break;
+	case FB_BLANK_VSYNC_SUSPEND:
+		intelfb_off(info, DRM_MODE_DPMS_SUSPEND);
+		break;
+	case FB_BLANK_POWERDOWN:
+		intelfb_off(info, DRM_MODE_DPMS_OFF);
+		break;
+	}
+	return 0;
+}
+
+static struct fb_ops intelfb_ops = {
+	.owner = THIS_MODULE,
+	.fb_check_var = intelfb_check_var,
+	.fb_set_par = intelfb_set_par,
+	.fb_setcolreg = intelfb_setcolreg,
+	.fb_fillrect = cfb_fillrect,
+	.fb_copyarea = cfb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+	.fb_pan_display = intelfb_pan_display,
+	.fb_blank = intelfb_blank,
+};
+
+/**
+ * Curretly it is assumed that the old framebuffer is reused.
+ *
+ * LOCKING
+ * caller should hold the mode config lock.
+ *
+ */
+int intelfb_resize(struct drm_device *dev, struct drm_crtc *crtc)
+{
+	struct fb_info *info;
+	struct drm_framebuffer *fb;
+	struct drm_display_mode *mode = crtc->desired_mode;
+
+	fb = crtc->fb;
+	if (!fb)
+		return 1;
+
+	info = fb->fbdev;
+	if (!info)
+		return 1;
+
+	if (!mode)
+		return 1;
+
+	info->var.xres = mode->hdisplay;
+	info->var.right_margin = mode->hsync_start - mode->hdisplay;
+	info->var.hsync_len = mode->hsync_end - mode->hsync_start;
+	info->var.left_margin = mode->htotal - mode->hsync_end;
+	info->var.yres = mode->vdisplay;
+	info->var.lower_margin = mode->vsync_start - mode->vdisplay;
+	info->var.vsync_len = mode->vsync_end - mode->vsync_start;
+	info->var.upper_margin = mode->vtotal - mode->vsync_end;
+	info->var.pixclock = 10000000 / mode->htotal * 1000 / mode->vtotal * 100;
+	/* avoid overflow */
+	info->var.pixclock = info->var.pixclock * 1000 / mode->vrefresh;
+
+	return 0;
+}
+EXPORT_SYMBOL(intelfb_resize);
+
+static struct drm_mode_set kernelfb_mode;
+
+int intelfb_panic(struct notifier_block *n, unsigned long ununsed,
+		  void *panic_str)
+{
+	DRM_ERROR("panic occurred, switching back to text console\n");
+
+	intelfb_restore();
+	return 0;
+}
+EXPORT_SYMBOL(intelfb_panic);
+
+static struct notifier_block paniced = {
+	.notifier_call = intelfb_panic,
+};
+
+int intelfb_create(struct drm_device *dev, uint32_t fb_width,
+		   uint32_t fb_height, uint32_t surface_width,
+		   uint32_t surface_height,
+		   struct intel_framebuffer **intel_fb_p)
+{
+	struct fb_info *info;
+	struct intelfb_par *par;
+	struct drm_framebuffer *fb;
+	struct intel_framebuffer *intel_fb;
+	struct drm_mode_fb_cmd mode_cmd;
+	struct drm_gem_object *fbo = NULL;
+	struct drm_i915_gem_object *obj_priv;
+	struct device *device = &dev->pdev->dev;
+	int size, ret, mmio_bar = IS_I9XX(dev) ? 0 : 1;
+
+	mode_cmd.width = surface_width;
+	mode_cmd.height = surface_height;
+
+	mode_cmd.bpp = 32;
+	mode_cmd.pitch = mode_cmd.width * ((mode_cmd.bpp + 1) / 8);
+	mode_cmd.depth = 24;
+
+	size = mode_cmd.pitch * mode_cmd.height;
+	size = ALIGN(size, PAGE_SIZE);
+	fbo = drm_gem_object_alloc(dev, size);
+	if (!fbo) {
+		printk(KERN_ERR "failed to allocate framebuffer\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+	obj_priv = fbo->driver_private;
+
+	mutex_lock(&dev->struct_mutex);
+
+	ret = i915_gem_object_pin(fbo, PAGE_SIZE);
+	if (ret) {
+		DRM_ERROR("failed to pin fb: %d\n", ret);
+		goto out_unref;
+	}
+
+	/* Flush everything out, we'll be doing GTT only from now on */
+	i915_gem_object_set_to_gtt_domain(fbo, 1);
+
+	ret = intel_framebuffer_create(dev, &mode_cmd, &fb, fbo);
+	if (ret) {
+		DRM_ERROR("failed to allocate fb.\n");
+		goto out_unref;
+	}
+
+	list_add(&fb->filp_head, &dev->mode_config.fb_kernel_list);
+
+	intel_fb = to_intel_framebuffer(fb);
+	*intel_fb_p = intel_fb;
+
+	info = framebuffer_alloc(sizeof(struct intelfb_par), device);
+	if (!info) {
+		ret = -ENOMEM;
+		goto out_unref;
+	}
+
+	par = info->par;
+
+	strcpy(info->fix.id, "inteldrmfb");
+	info->fix.type = FB_TYPE_PACKED_PIXELS;
+	info->fix.visual = FB_VISUAL_TRUECOLOR;
+	info->fix.type_aux = 0;
+	info->fix.xpanstep = 1; /* doing it in hw */
+	info->fix.ypanstep = 1; /* doing it in hw */
+	info->fix.ywrapstep = 0;
+	info->fix.accel = FB_ACCEL_I830;
+	info->fix.type_aux = 0;
+
+	info->flags = FBINFO_DEFAULT;
+
+	info->fbops = &intelfb_ops;
+
+	info->fix.line_length = fb->pitch;
+	info->fix.smem_start = dev->mode_config.fb_base + obj_priv->gtt_offset;
+	info->fix.smem_len = size;
+
+	info->flags = FBINFO_DEFAULT;
+
+	info->screen_base = ioremap_wc(dev->agp->base + obj_priv->gtt_offset,
+				       size);
+	if (!info->screen_base) {
+		ret = -ENOSPC;
+		goto out_unref;
+	}
+	info->screen_size = size;
+
+//	memset(info->screen_base, 0, size);
+
+	info->pseudo_palette = fb->pseudo_palette;
+	info->var.xres_virtual = fb->width;
+	info->var.yres_virtual = fb->height;
+	info->var.bits_per_pixel = fb->bits_per_pixel;
+	info->var.xoffset = 0;
+	info->var.yoffset = 0;
+	info->var.activate = FB_ACTIVATE_NOW;
+	info->var.height = -1;
+	info->var.width = -1;
+
+	info->var.xres = fb_width;
+	info->var.yres = fb_height;
+
+	/* FIXME: we really shouldn't expose mmio space at all */
+	info->fix.mmio_start = pci_resource_start(dev->pdev, mmio_bar);
+	info->fix.mmio_len = pci_resource_len(dev->pdev, mmio_bar);
+
+	info->pixmap.size = 64*1024;
+	info->pixmap.buf_align = 8;
+	info->pixmap.access_align = 32;
+	info->pixmap.flags = FB_PIXMAP_SYSTEM;
+	info->pixmap.scan_align = 1;
+
+	switch(fb->depth) {
+	case 8:
+		info->var.red.offset = 0;
+		info->var.green.offset = 0;
+		info->var.blue.offset = 0;
+		info->var.red.length = 8; /* 8bit DAC */
+		info->var.green.length = 8;
+		info->var.blue.length = 8;
+		info->var.transp.offset = 0;
+		info->var.transp.length = 0;
+		break;
+	case 15:
+		info->var.red.offset = 10;
+		info->var.green.offset = 5;
+		info->var.blue.offset = 0;
+		info->var.red.length = 5;
+		info->var.green.length = 5;
+		info->var.blue.length = 5;
+		info->var.transp.offset = 15;
+		info->var.transp.length = 1;
+		break;
+	case 16:
+		info->var.red.offset = 11;
+		info->var.green.offset = 5;
+		info->var.blue.offset = 0;
+		info->var.red.length = 5;
+		info->var.green.length = 6;
+		info->var.blue.length = 5;
+		info->var.transp.offset = 0;
+		break;
+	case 24:
+		info->var.red.offset = 16;
+		info->var.green.offset = 8;
+		info->var.blue.offset = 0;
+		info->var.red.length = 8;
+		info->var.green.length = 8;
+		info->var.blue.length = 8;
+		info->var.transp.offset = 0;
+		info->var.transp.length = 0;
+		break;
+	case 32:
+		info->var.red.offset = 16;
+		info->var.green.offset = 8;
+		info->var.blue.offset = 0;
+		info->var.red.length = 8;
+		info->var.green.length = 8;
+		info->var.blue.length = 8;
+		info->var.transp.offset = 24;
+		info->var.transp.length = 8;
+		break;
+	default:
+		break;
+	}
+
+	fb->fbdev = info;
+
+	par->intel_fb = intel_fb;
+	par->dev = dev;
+
+	/* To allow resizeing without swapping buffers */
+	printk("allocated %dx%d fb: 0x%08x, bo %p\n", intel_fb->base.width,
+	       intel_fb->base.height, obj_priv->gtt_offset, fbo);
+
+	mutex_unlock(&dev->struct_mutex);
+	return 0;
+
+out_unref:
+	drm_gem_object_unreference(fbo);
+	mutex_unlock(&dev->struct_mutex);
+out:
+	return ret;
+}
+
+static int intelfb_multi_fb_probe_crtc(struct drm_device *dev, struct drm_crtc *crtc)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_framebuffer *intel_fb;
+	struct drm_framebuffer *fb;
+	struct drm_connector *connector;
+	struct fb_info *info;
+	struct intelfb_par *par;
+	struct drm_mode_set *modeset;
+	unsigned int width, height;
+	int new_fb = 0;
+	int ret, i, conn_count;
+
+	if (!drm_helper_crtc_in_use(crtc))
+		return 0;
+
+	if (!crtc->desired_mode)
+		return 0;
+
+	width = crtc->desired_mode->hdisplay;
+	height = crtc->desired_mode->vdisplay;
+
+	/* is there an fb bound to this crtc already */
+	if (!intel_crtc->mode_set.fb) {
+		ret = intelfb_create(dev, width, height, width, height, &intel_fb);
+		if (ret)
+			return -EINVAL;
+		new_fb = 1;
+	} else {
+		fb = intel_crtc->mode_set.fb;
+		intel_fb = to_intel_framebuffer(fb);
+		if ((intel_fb->base.width < width) || (intel_fb->base.height < height))
+			return -EINVAL;
+	}
+
+	info = intel_fb->base.fbdev;
+	par = info->par;
+
+	modeset = &intel_crtc->mode_set;
+	modeset->fb = &intel_fb->base;
+	conn_count = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		if (connector->encoder)
+			if (connector->encoder->crtc == modeset->crtc) {
+				modeset->connectors[conn_count] = connector;
+				conn_count++;
+				if (conn_count > INTELFB_CONN_LIMIT)
+					BUG();
+			}
+	}
+
+	for (i = conn_count; i < INTELFB_CONN_LIMIT; i++)
+		modeset->connectors[i] = NULL;
+
+	par->crtc_ids[0] = crtc->base.id;
+
+	modeset->num_connectors = conn_count;
+	if (modeset->mode != modeset->crtc->desired_mode)
+		modeset->mode = modeset->crtc->desired_mode;
+
+	par->crtc_count = 1;
+
+	if (new_fb) {
+		info->var.pixclock = -1;
+		if (register_framebuffer(info) < 0)
+			return -EINVAL;
+	} else
+		intelfb_set_par(info);
+
+	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+	       info->fix.id);
+
+	/* Switch back to kernel console on panic */
+	kernelfb_mode = *modeset;
+	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
+	printk(KERN_INFO "registered panic notifier\n");
+
+	return 0;
+}
+
+static int intelfb_multi_fb_probe(struct drm_device *dev)
+{
+
+	struct drm_crtc *crtc;
+	int ret = 0;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		ret = intelfb_multi_fb_probe_crtc(dev, crtc);
+		if (ret)
+			return ret;
+	}
+	return ret;
+}
+
+static int intelfb_single_fb_probe(struct drm_device *dev)
+{
+	struct drm_crtc *crtc;
+	struct drm_connector *connector;
+	unsigned int fb_width = (unsigned)-1, fb_height = (unsigned)-1;
+	unsigned int surface_width = 0, surface_height = 0;
+	int new_fb = 0;
+	int crtc_count = 0;
+	int ret, i, conn_count = 0;
+	struct intel_framebuffer *intel_fb;
+	struct fb_info *info;
+	struct intelfb_par *par;
+	struct drm_mode_set *modeset = NULL;
+
+	DRM_DEBUG("\n");
+
+	/* Get a count of crtcs now in use and new min/maxes width/heights */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		if (!drm_helper_crtc_in_use(crtc))
+			continue;
+
+		crtc_count++;
+		if (!crtc->desired_mode)
+			continue;
+
+		/* Smallest mode determines console size... */
+		if (crtc->desired_mode->hdisplay < fb_width)
+			fb_width = crtc->desired_mode->hdisplay;
+
+		if (crtc->desired_mode->vdisplay < fb_height)
+			fb_height = crtc->desired_mode->vdisplay;
+
+		/* ... but largest for memory allocation dimensions */
+		if (crtc->desired_mode->hdisplay > surface_width)
+			surface_width = crtc->desired_mode->hdisplay;
+
+		if (crtc->desired_mode->vdisplay > surface_height)
+			surface_height = crtc->desired_mode->vdisplay;
+	}
+
+	if (crtc_count == 0 || fb_width == -1 || fb_height == -1) {
+		/* hmm everyone went away - assume VGA cable just fell out
+		   and will come back later. */
+		DRM_DEBUG("no CRTCs available?\n");
+		return 0;
+	}
+
+//fail
+	/* Find the fb for our new config */
+	if (list_empty(&dev->mode_config.fb_kernel_list)) {
+		DRM_DEBUG("creating new fb (console size %dx%d, "
+			  "buffer size %dx%d)\n", fb_width, fb_height,
+			  surface_width, surface_height);
+		ret = intelfb_create(dev, fb_width, fb_height, surface_width,
+				     surface_height, &intel_fb);
+		if (ret)
+			return -EINVAL;
+		new_fb = 1;
+	} else {
+		struct drm_framebuffer *fb;
+
+		fb = list_first_entry(&dev->mode_config.fb_kernel_list,
+				      struct drm_framebuffer, filp_head);
+		intel_fb = to_intel_framebuffer(fb);
+
+		/* if someone hotplugs something bigger than we have already
+		 * allocated, we are pwned.  As really we can't resize an
+		 * fbdev that is in the wild currently due to fbdev not really
+		 * being designed for the lower layers moving stuff around
+		 * under it.
+		 * - so in the grand style of things - punt.
+		 */
+		if ((fb->width < surface_width) ||
+		    (fb->height < surface_height)) {
+			DRM_ERROR("fb not large enough for console\n");
+			return -EINVAL;
+		}
+	}
+// fail
+
+	info = intel_fb->base.fbdev;
+	par = info->par;
+
+	crtc_count = 0;
+	/*
+	 * For each CRTC, set up the connector list for the CRTC's mode
+	 * set configuration.
+	 */
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+		modeset = &intel_crtc->mode_set;
+		modeset->fb = &intel_fb->base;
+		conn_count = 0;
+		list_for_each_entry(connector, &dev->mode_config.connector_list,
+				    head) {
+			if (!connector->encoder)
+				continue;
+
+			if(connector->encoder->crtc == modeset->crtc) {
+				modeset->connectors[conn_count++] = connector;
+				if (conn_count > INTELFB_CONN_LIMIT)
+					BUG();
+			}
+		}
+
+		/* Zero out remaining connector pointers */
+		for (i = conn_count; i < INTELFB_CONN_LIMIT; i++)
+			modeset->connectors[i] = NULL;
+
+		par->crtc_ids[crtc_count++] = crtc->base.id;
+
+		modeset->num_connectors = conn_count;
+		if (modeset->mode != modeset->crtc->desired_mode)
+			modeset->mode = modeset->crtc->desired_mode;
+	}
+	par->crtc_count = crtc_count;
+
+	if (new_fb) {
+		info->var.pixclock = -1;
+		if (register_framebuffer(info) < 0)
+			return -EINVAL;
+	} else
+		intelfb_set_par(info);
+
+	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
+	       info->fix.id);
+
+	/* Switch back to kernel console on panic */
+	kernelfb_mode = *modeset;
+	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
+	printk(KERN_INFO "registered panic notifier\n");
+
+	return 0;
+}
+
+/**
+ * intelfb_restore - restore the framebuffer console (kernel) config
+ *
+ * Restore's the kernel's fbcon mode, used for lastclose & panic paths.
+ */
+void intelfb_restore(void)
+{
+	drm_crtc_helper_set_config(&kernelfb_mode);
+}
+
+static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3)
+{
+        intelfb_restore();
+}
+
+static struct sysrq_key_op sysrq_intelfb_restore_op = {
+        .handler = intelfb_sysrq,
+        .help_msg = "force fb",
+        .action_msg = "force restore of fb console",
+};
+
+int intelfb_probe(struct drm_device *dev)
+{
+	int ret;
+
+	DRM_DEBUG("\n");
+
+	/* something has changed in the lower levels of hell - deal with it
+	   here */
+
+	/* two modes : a) 1 fb to rule all crtcs.
+	               b) one fb per crtc.
+	   two actions 1) new connected device
+	               2) device removed.
+	   case a/1 : if the fb surface isn't big enough - resize the surface fb.
+	              if the fb size isn't big enough - resize fb into surface.
+		      if everything big enough configure the new crtc/etc.
+	   case a/2 : undo the configuration
+	              possibly resize down the fb to fit the new configuration.
+           case b/1 : see if it is on a new crtc - setup a new fb and add it.
+	   case b/2 : teardown the new fb.
+	*/
+
+	/* mode a first */
+	/* search for an fb */
+	if (i915_fbpercrtc == 1) {
+		ret = intelfb_multi_fb_probe(dev);
+	} else {
+		ret = intelfb_single_fb_probe(dev);
+	}
+
+	register_sysrq_key('g', &sysrq_intelfb_restore_op);
+
+	return ret;
+}
+EXPORT_SYMBOL(intelfb_probe);
+
+int intelfb_remove(struct drm_device *dev, struct drm_framebuffer *fb)
+{
+	struct fb_info *info;
+
+	if (!fb)
+		return -EINVAL;
+
+	info = fb->fbdev;
+
+	if (info) {
+		unregister_framebuffer(info);
+		iounmap(info->screen_base);
+		framebuffer_release(info);
+	}
+
+	atomic_notifier_chain_unregister(&panic_notifier_list, &paniced);
+	memset(&kernelfb_mode, 0, sizeof(struct drm_mode_set));
+	return 0;
+}
+EXPORT_SYMBOL(intelfb_remove);
+MODULE_LICENSE("GPL and additional rights");
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
new file mode 100644
index 00000000000..a5a2f5339e9
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -0,0 +1,184 @@
+/*
+ * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
+ * Copyright © 2006-2008 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <linux/i2c-algo-bit.h>
+#include "drmP.h"
+#include "drm.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+/*
+ * Intel GPIO access functions
+ */
+
+#define I2C_RISEFALL_TIME 20
+
+static int get_clock(void *data)
+{
+	struct intel_i2c_chan *chan = data;
+	struct drm_i915_private *dev_priv = chan->drm_dev->dev_private;
+	u32 val;
+
+	val = I915_READ(chan->reg);
+	return ((val & GPIO_CLOCK_VAL_IN) != 0);
+}
+
+static int get_data(void *data)
+{
+	struct intel_i2c_chan *chan = data;
+	struct drm_i915_private *dev_priv = chan->drm_dev->dev_private;
+	u32 val;
+
+	val = I915_READ(chan->reg);
+	return ((val & GPIO_DATA_VAL_IN) != 0);
+}
+
+static void set_clock(void *data, int state_high)
+{
+	struct intel_i2c_chan *chan = data;
+	struct drm_device *dev = chan->drm_dev;
+	struct drm_i915_private *dev_priv = chan->drm_dev->dev_private;
+	u32 reserved = 0, clock_bits;
+
+	/* On most chips, these bits must be preserved in software. */
+	if (!IS_I830(dev) && !IS_845G(dev))
+		reserved = I915_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE |
+						   GPIO_CLOCK_PULLUP_DISABLE);
+
+	if (state_high)
+		clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK;
+	else
+		clock_bits = GPIO_CLOCK_DIR_OUT | GPIO_CLOCK_DIR_MASK |
+			GPIO_CLOCK_VAL_MASK;
+	I915_WRITE(chan->reg, reserved | clock_bits);
+	udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */
+}
+
+static void set_data(void *data, int state_high)
+{
+	struct intel_i2c_chan *chan = data;
+	struct drm_device *dev = chan->drm_dev;
+	struct drm_i915_private *dev_priv = chan->drm_dev->dev_private;
+	u32 reserved = 0, data_bits;
+
+	/* On most chips, these bits must be preserved in software. */
+	if (!IS_I830(dev) && !IS_845G(dev))
+		reserved = I915_READ(chan->reg) & (GPIO_DATA_PULLUP_DISABLE |
+						   GPIO_CLOCK_PULLUP_DISABLE);
+
+	if (state_high)
+		data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK;
+	else
+		data_bits = GPIO_DATA_DIR_OUT | GPIO_DATA_DIR_MASK |
+			GPIO_DATA_VAL_MASK;
+
+	I915_WRITE(chan->reg, reserved | data_bits);
+	udelay(I2C_RISEFALL_TIME); /* wait for the line to change state */
+}
+
+/**
+ * intel_i2c_create - instantiate an Intel i2c bus using the specified GPIO reg
+ * @dev: DRM device
+ * @output: driver specific output device
+ * @reg: GPIO reg to use
+ * @name: name for this bus
+ *
+ * Creates and registers a new i2c bus with the Linux i2c layer, for use
+ * in output probing and control (e.g. DDC or SDVO control functions).
+ *
+ * Possible values for @reg include:
+ *   %GPIOA
+ *   %GPIOB
+ *   %GPIOC
+ *   %GPIOD
+ *   %GPIOE
+ *   %GPIOF
+ *   %GPIOG
+ *   %GPIOH
+ * see PRM for details on how these different busses are used.
+ */
+struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
+					const char *name)
+{
+	struct intel_i2c_chan *chan;
+
+	chan = kzalloc(sizeof(struct intel_i2c_chan), GFP_KERNEL);
+	if (!chan)
+		goto out_free;
+
+	chan->drm_dev = dev;
+	chan->reg = reg;
+	snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name);
+	chan->adapter.owner = THIS_MODULE;
+#ifndef I2C_HW_B_INTELFB
+#define I2C_HW_B_INTELFB I2C_HW_B_I810
+#endif
+	chan->adapter.id = I2C_HW_B_INTELFB;
+	chan->adapter.algo_data	= &chan->algo;
+	chan->adapter.dev.parent = &dev->pdev->dev;
+	chan->algo.setsda = set_data;
+	chan->algo.setscl = set_clock;
+	chan->algo.getsda = get_data;
+	chan->algo.getscl = get_clock;
+	chan->algo.udelay = 20;
+	chan->algo.timeout = usecs_to_jiffies(2200);
+	chan->algo.data = chan;
+
+	i2c_set_adapdata(&chan->adapter, chan);
+
+	if(i2c_bit_add_bus(&chan->adapter))
+		goto out_free;
+
+	/* JJJ:  raise SCL and SDA? */
+	set_data(chan, 1);
+	set_clock(chan, 1);
+	udelay(20);
+
+	return chan;
+
+out_free:
+	kfree(chan);
+	return NULL;
+}
+
+/**
+ * intel_i2c_destroy - unregister and free i2c bus resources
+ * @output: channel to free
+ *
+ * Unregister the adapter from the i2c layer, then free the structure.
+ */
+void intel_i2c_destroy(struct intel_i2c_chan *chan)
+{
+	if (!chan)
+		return;
+
+	i2c_del_adapter(&chan->adapter);
+	kfree(chan);
+}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
new file mode 100644
index 00000000000..ccecfaf6307
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -0,0 +1,525 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *      Dave Airlie <airlied@linux.ie>
+ *      Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include <linux/i2c.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_edid.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+/**
+ * Sets the backlight level.
+ *
+ * \param level backlight level, from 0 to intel_lvds_get_max_backlight().
+ */
+static void intel_lvds_set_backlight(struct drm_device *dev, int level)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 blc_pwm_ctl;
+
+	blc_pwm_ctl = I915_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
+	I915_WRITE(BLC_PWM_CTL, (blc_pwm_ctl |
+				 (level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
+}
+
+/**
+ * Returns the maximum level of the backlight duty cycle field.
+ */
+static u32 intel_lvds_get_max_backlight(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	return ((I915_READ(BLC_PWM_CTL) & BACKLIGHT_MODULATION_FREQ_MASK) >>
+		BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+}
+
+/**
+ * Sets the power state for the panel.
+ */
+static void intel_lvds_set_power(struct drm_device *dev, bool on)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 pp_status;
+
+	if (on) {
+		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) |
+			   POWER_TARGET_ON);
+		do {
+			pp_status = I915_READ(PP_STATUS);
+		} while ((pp_status & PP_ON) == 0);
+
+		intel_lvds_set_backlight(dev, dev_priv->backlight_duty_cycle);
+	} else {
+		intel_lvds_set_backlight(dev, 0);
+
+		I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) &
+			   ~POWER_TARGET_ON);
+		do {
+			pp_status = I915_READ(PP_STATUS);
+		} while (pp_status & PP_ON);
+	}
+}
+
+static void intel_lvds_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+
+	if (mode == DRM_MODE_DPMS_ON)
+		intel_lvds_set_power(dev, true);
+	else
+		intel_lvds_set_power(dev, false);
+
+	/* XXX: We never power down the LVDS pairs. */
+}
+
+static void intel_lvds_save(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->savePP_ON = I915_READ(PP_ON_DELAYS);
+	dev_priv->savePP_OFF = I915_READ(PP_OFF_DELAYS);
+	dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
+	dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
+	dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+	dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
+				       BACKLIGHT_DUTY_CYCLE_MASK);
+
+	/*
+	 * If the light is off at server startup, just make it full brightness
+	 */
+	if (dev_priv->backlight_duty_cycle == 0)
+		dev_priv->backlight_duty_cycle =
+			intel_lvds_get_max_backlight(dev);
+}
+
+static void intel_lvds_restore(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
+	I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON);
+	I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF);
+	I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
+	I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+	if (dev_priv->savePP_CONTROL & POWER_TARGET_ON)
+		intel_lvds_set_power(dev, true);
+	else
+		intel_lvds_set_power(dev, false);
+}
+
+static int intel_lvds_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_display_mode *fixed_mode = dev_priv->panel_fixed_mode;
+
+	if (fixed_mode)	{
+		if (mode->hdisplay > fixed_mode->hdisplay)
+			return MODE_PANEL;
+		if (mode->vdisplay > fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+
+	return MODE_OK;
+}
+
+static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
+	struct drm_encoder *tmp_encoder;
+
+	/* Should never happen!! */
+	if (!IS_I965G(dev) && intel_crtc->pipe == 0) {
+		printk(KERN_ERR "Can't support LVDS on pipe A\n");
+		return false;
+	}
+
+	/* Should never happen!! */
+	list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list, head) {
+		if (tmp_encoder != encoder && tmp_encoder->crtc == encoder->crtc) {
+			printk(KERN_ERR "Can't enable LVDS and another "
+			       "encoder on the same pipe\n");
+			return false;
+		}
+	}
+
+	/*
+	 * If we have timings from the BIOS for the panel, put them in
+	 * to the adjusted mode.  The CRTC will be set up for this mode,
+	 * with the panel scaling set up to source from the H/VDisplay
+	 * of the original mode.
+	 */
+	if (dev_priv->panel_fixed_mode != NULL) {
+		adjusted_mode->hdisplay = dev_priv->panel_fixed_mode->hdisplay;
+		adjusted_mode->hsync_start =
+			dev_priv->panel_fixed_mode->hsync_start;
+		adjusted_mode->hsync_end =
+			dev_priv->panel_fixed_mode->hsync_end;
+		adjusted_mode->htotal = dev_priv->panel_fixed_mode->htotal;
+		adjusted_mode->vdisplay = dev_priv->panel_fixed_mode->vdisplay;
+		adjusted_mode->vsync_start =
+			dev_priv->panel_fixed_mode->vsync_start;
+		adjusted_mode->vsync_end =
+			dev_priv->panel_fixed_mode->vsync_end;
+		adjusted_mode->vtotal = dev_priv->panel_fixed_mode->vtotal;
+		adjusted_mode->clock = dev_priv->panel_fixed_mode->clock;
+		drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
+	}
+
+	/*
+	 * XXX: It would be nice to support lower refresh rates on the
+	 * panels to reduce power consumption, and perhaps match the
+	 * user's requested refresh rate.
+	 */
+
+	return true;
+}
+
+static void intel_lvds_prepare(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+	dev_priv->backlight_duty_cycle = (dev_priv->saveBLC_PWM_CTL &
+				       BACKLIGHT_DUTY_CYCLE_MASK);
+
+	intel_lvds_set_power(dev, false);
+}
+
+static void intel_lvds_commit( struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->backlight_duty_cycle == 0)
+		dev_priv->backlight_duty_cycle =
+			intel_lvds_get_max_backlight(dev);
+
+	intel_lvds_set_power(dev, true);
+}
+
+static void intel_lvds_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
+	u32 pfit_control;
+
+	/*
+	 * The LVDS pin pair will already have been turned on in the
+	 * intel_crtc_mode_set since it has a large impact on the DPLL
+	 * settings.
+	 */
+
+	/*
+	 * Enable automatic panel scaling so that non-native modes fill the
+	 * screen.  Should be enabled before the pipe is enabled, according to
+	 * register description and PRM.
+	 */
+	if (mode->hdisplay != adjusted_mode->hdisplay ||
+	    mode->vdisplay != adjusted_mode->vdisplay)
+		pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
+				HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
+				HORIZ_INTERP_BILINEAR);
+	else
+		pfit_control = 0;
+
+	if (!IS_I965G(dev)) {
+		if (dev_priv->panel_wants_dither)
+			pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+	}
+	else
+		pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT;
+
+	I915_WRITE(PFIT_CONTROL, pfit_control);
+}
+
+/**
+ * Detect the LVDS connection.
+ *
+ * This always returns CONNECTOR_STATUS_CONNECTED.  This connector should only have
+ * been set up if the LVDS was actually connected anyway.
+ */
+static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector)
+{
+	return connector_status_connected;
+}
+
+/**
+ * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
+ */
+static int intel_lvds_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret = 0;
+
+	ret = intel_ddc_get_modes(intel_output);
+
+	if (ret)
+		return ret;
+
+	/* Didn't get an EDID, so
+	 * Set wide sync ranges so we get all modes
+	 * handed to valid_mode for checking
+	 */
+	connector->display_info.min_vfreq = 0;
+	connector->display_info.max_vfreq = 200;
+	connector->display_info.min_hfreq = 0;
+	connector->display_info.max_hfreq = 200;
+
+	if (dev_priv->panel_fixed_mode != NULL) {
+		struct drm_display_mode *mode;
+
+		mutex_unlock(&dev->mode_config.mutex);
+		mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
+		drm_mode_probed_add(connector, mode);
+		mutex_unlock(&dev->mode_config.mutex);
+
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * intel_lvds_destroy - unregister and free LVDS structures
+ * @connector: connector to free
+ *
+ * Unregister the DDC bus for this connector then free the driver private
+ * structure.
+ */
+static void intel_lvds_destroy(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	if (intel_output->ddc_bus)
+		intel_i2c_destroy(intel_output->ddc_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = {
+	.dpms = intel_lvds_dpms,
+	.mode_fixup = intel_lvds_mode_fixup,
+	.prepare = intel_lvds_prepare,
+	.mode_set = intel_lvds_mode_set,
+	.commit = intel_lvds_commit,
+};
+
+static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs = {
+	.get_modes = intel_lvds_get_modes,
+	.mode_valid = intel_lvds_mode_valid,
+	.best_encoder = intel_best_encoder,
+};
+
+static const struct drm_connector_funcs intel_lvds_connector_funcs = {
+	.save = intel_lvds_save,
+	.restore = intel_lvds_restore,
+	.detect = intel_lvds_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = intel_lvds_destroy,
+};
+
+
+static void intel_lvds_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
+	.destroy = intel_lvds_enc_destroy,
+};
+
+
+
+/**
+ * intel_lvds_init - setup LVDS connectors on this device
+ * @dev: drm device
+ *
+ * Create the connector, register the LVDS DDC bus, and try to figure out what
+ * modes we can display on the LVDS panel (if present).
+ */
+void intel_lvds_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_output *intel_output;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct drm_display_mode *scan; /* *modes, *bios_mode; */
+	struct drm_crtc *crtc;
+	u32 lvds;
+	int pipe;
+
+	intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+	if (!intel_output) {
+		return;
+	}
+
+	connector = &intel_output->base;
+	encoder = &intel_output->enc;
+	drm_connector_init(dev, &intel_output->base, &intel_lvds_connector_funcs,
+			   DRM_MODE_CONNECTOR_LVDS);
+
+	drm_encoder_init(dev, &intel_output->enc, &intel_lvds_enc_funcs,
+			 DRM_MODE_ENCODER_LVDS);
+
+	drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
+	intel_output->type = INTEL_OUTPUT_LVDS;
+
+	drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
+	drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+
+	/*
+	 * LVDS discovery:
+	 * 1) check for EDID on DDC
+	 * 2) check for VBT data
+	 * 3) check to see if LVDS is already on
+	 *    if none of the above, no panel
+	 * 4) make sure lid is open
+	 *    if closed, act like it's not there for now
+	 */
+
+	/* Set up the DDC bus. */
+	intel_output->ddc_bus = intel_i2c_create(dev, GPIOC, "LVDSDDC_C");
+	if (!intel_output->ddc_bus) {
+		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
+			   "failed.\n");
+		goto failed;
+	}
+
+	/*
+	 * Attempt to get the fixed panel mode from DDC.  Assume that the
+	 * preferred mode is the right one.
+	 */
+	intel_ddc_get_modes(intel_output);
+
+	list_for_each_entry(scan, &connector->probed_modes, head) {
+		mutex_lock(&dev->mode_config.mutex);
+		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+			dev_priv->panel_fixed_mode =
+				drm_mode_duplicate(dev, scan);
+			mutex_unlock(&dev->mode_config.mutex);
+			goto out; /* FIXME: check for quirks */
+		}
+		mutex_unlock(&dev->mode_config.mutex);
+	}
+
+	/* Failed to get EDID, what about VBT? */
+	if (dev_priv->vbt_mode) {
+		mutex_lock(&dev->mode_config.mutex);
+		dev_priv->panel_fixed_mode =
+			drm_mode_duplicate(dev, dev_priv->vbt_mode);
+		mutex_unlock(&dev->mode_config.mutex);
+	}
+
+	/*
+	 * If we didn't get EDID, try checking if the panel is already turned
+	 * on.  If so, assume that whatever is currently programmed is the
+	 * correct mode.
+	 */
+	lvds = I915_READ(LVDS);
+	pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
+	crtc = intel_get_crtc_from_pipe(dev, pipe);
+
+	if (crtc && (lvds & LVDS_PORT_EN)) {
+		dev_priv->panel_fixed_mode = intel_crtc_mode_get(dev, crtc);
+		if (dev_priv->panel_fixed_mode) {
+			dev_priv->panel_fixed_mode->type |=
+				DRM_MODE_TYPE_PREFERRED;
+			goto out; /* FIXME: check for quirks */
+		}
+	}
+
+	/* If we still don't have a mode after all that, give up. */
+	if (!dev_priv->panel_fixed_mode)
+		goto failed;
+
+	/* FIXME: detect aopen & mac mini type stuff automatically? */
+	/*
+	 * Blacklist machines with BIOSes that list an LVDS panel without
+	 * actually having one.
+	 */
+	if (IS_I945GM(dev)) {
+		/* aopen mini pc */
+		if (dev->pdev->subsystem_vendor == 0xa0a0)
+			goto failed;
+
+		if ((dev->pdev->subsystem_vendor == 0x8086) &&
+		    (dev->pdev->subsystem_device == 0x7270)) {
+			/* It's a Mac Mini or Macbook Pro.
+			 *
+			 * Apple hardware is out to get us.  The macbook pro
+			 * has a real LVDS panel, but the mac mini does not,
+			 * and they have the same device IDs.  We'll
+			 * distinguish by panel size, on the assumption
+			 * that Apple isn't about to make any machines with an
+			 * 800x600 display.
+			 */
+
+			if (dev_priv->panel_fixed_mode != NULL &&
+			    dev_priv->panel_fixed_mode->hdisplay == 800 &&
+			    dev_priv->panel_fixed_mode->vdisplay == 600) {
+				DRM_DEBUG("Suspected Mac Mini, ignoring the LVDS\n");
+				goto failed;
+			}
+		}
+	}
+
+
+out:
+	drm_sysfs_connector_add(connector);
+	return;
+
+failed:
+	DRM_DEBUG("No LVDS modes found, disabling.\n");
+	if (intel_output->ddc_bus)
+		intel_i2c_destroy(intel_output->ddc_bus);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
new file mode 100644
index 00000000000..e42019e5d66
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
+ * Copyright (c) 2007 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include "drmP.h"
+#include "intel_drv.h"
+
+/**
+ * intel_ddc_probe
+ *
+ */
+bool intel_ddc_probe(struct intel_output *intel_output)
+{
+	u8 out_buf[] = { 0x0, 0x0};
+	u8 buf[2];
+	int ret;
+	struct i2c_msg msgs[] = {
+		{
+			.addr = 0x50,
+			.flags = 0,
+			.len = 1,
+			.buf = out_buf,
+		},
+		{
+			.addr = 0x50,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = buf,
+		}
+	};
+
+	ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2);
+	if (ret == 2)
+		return true;
+
+	return false;
+}
+
+/**
+ * intel_ddc_get_modes - get modelist from monitor
+ * @connector: DRM connector device to use
+ *
+ * Fetch the EDID information from @connector using the DDC bus.
+ */
+int intel_ddc_get_modes(struct intel_output *intel_output)
+{
+	struct edid *edid;
+	int ret = 0;
+
+	edid = drm_get_edid(&intel_output->base,
+			    &intel_output->ddc_bus->adapter);
+	if (edid) {
+		drm_mode_connector_update_edid_property(&intel_output->base,
+							edid);
+		ret = drm_add_edid_modes(&intel_output->base, edid);
+		kfree(edid);
+	}
+
+	return ret;
+}
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
new file mode 100644
index 00000000000..626258d72c9
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -0,0 +1,1127 @@
+/*
+ * Copyright 2006 Dave Airlie <airlied@linux.ie>
+ * Copyright © 2006-2007 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+#include "intel_sdvo_regs.h"
+
+#undef SDVO_DEBUG
+
+struct intel_sdvo_priv {
+	struct intel_i2c_chan *i2c_bus;
+	int slaveaddr;
+	int output_device;
+
+	u16 active_outputs;
+
+	struct intel_sdvo_caps caps;
+	int pixel_clock_min, pixel_clock_max;
+
+	int save_sdvo_mult;
+	u16 save_active_outputs;
+	struct intel_sdvo_dtd save_input_dtd_1, save_input_dtd_2;
+	struct intel_sdvo_dtd save_output_dtd[16];
+	u32 save_SDVOX;
+};
+
+/**
+ * Writes the SDVOB or SDVOC with the given value, but always writes both
+ * SDVOB and SDVOC to work around apparent hardware issues (according to
+ * comments in the BIOS).
+ */
+void intel_sdvo_write_sdvox(struct intel_output *intel_output, u32 val)
+{
+	struct drm_device *dev = intel_output->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_sdvo_priv   *sdvo_priv = intel_output->dev_priv;
+	u32 bval = val, cval = val;
+	int i;
+
+	if (sdvo_priv->output_device == SDVOB) {
+		cval = I915_READ(SDVOC);
+	} else {
+		bval = I915_READ(SDVOB);
+	}
+	/*
+	 * Write the registers twice for luck. Sometimes,
+	 * writing them only once doesn't appear to 'stick'.
+	 * The BIOS does this too. Yay, magic
+	 */
+	for (i = 0; i < 2; i++)
+	{
+		I915_WRITE(SDVOB, bval);
+		I915_READ(SDVOB);
+		I915_WRITE(SDVOC, cval);
+		I915_READ(SDVOC);
+	}
+}
+
+static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr,
+				 u8 *ch)
+{
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	u8 out_buf[2];
+	u8 buf[2];
+	int ret;
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = sdvo_priv->i2c_bus->slave_addr,
+			.flags = 0,
+			.len = 1,
+			.buf = out_buf,
+		},
+		{
+			.addr = sdvo_priv->i2c_bus->slave_addr,
+			.flags = I2C_M_RD,
+			.len = 1,
+			.buf = buf,
+		}
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = 0;
+
+	if ((ret = i2c_transfer(&sdvo_priv->i2c_bus->adapter, msgs, 2)) == 2)
+	{
+		*ch = buf[0];
+		return true;
+	}
+
+	DRM_DEBUG("i2c transfer returned %d\n", ret);
+	return false;
+}
+
+static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr,
+				  u8 ch)
+{
+	u8 out_buf[2];
+	struct i2c_msg msgs[] = {
+		{
+			.addr = intel_output->i2c_bus->slave_addr,
+			.flags = 0,
+			.len = 2,
+			.buf = out_buf,
+		}
+	};
+
+	out_buf[0] = addr;
+	out_buf[1] = ch;
+
+	if (i2c_transfer(&intel_output->i2c_bus->adapter, msgs, 1) == 1)
+	{
+		return true;
+	}
+	return false;
+}
+
+#define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd}
+/** Mapping of command numbers to names, for debug output */
+const static struct _sdvo_cmd_name {
+    u8 cmd;
+    char *name;
+} sdvo_cmd_names[] = {
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_RESOLUTION_SUPPORT),
+    SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH),
+};
+
+#define SDVO_NAME(dev_priv) ((dev_priv)->output_device == SDVOB ? "SDVOB" : "SDVOC")
+#define SDVO_PRIV(output)   ((struct intel_sdvo_priv *) (output)->dev_priv)
+
+#ifdef SDVO_DEBUG
+static void intel_sdvo_debug_write(struct intel_output *intel_output, u8 cmd,
+				   void *args, int args_len)
+{
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	int i;
+
+	DRM_DEBUG("%s: W: %02X ", SDVO_NAME(sdvo_priv), cmd);
+	for (i = 0; i < args_len; i++)
+		printk("%02X ", ((u8 *)args)[i]);
+	for (; i < 8; i++)
+		printk("   ");
+	for (i = 0; i < sizeof(sdvo_cmd_names) / sizeof(sdvo_cmd_names[0]); i++) {
+		if (cmd == sdvo_cmd_names[i].cmd) {
+			printk("(%s)", sdvo_cmd_names[i].name);
+			break;
+		}
+	}
+	if (i == sizeof(sdvo_cmd_names)/ sizeof(sdvo_cmd_names[0]))
+		printk("(%02X)",cmd);
+	printk("\n");
+}
+#else
+#define intel_sdvo_debug_write(o, c, a, l)
+#endif
+
+static void intel_sdvo_write_cmd(struct intel_output *intel_output, u8 cmd,
+				 void *args, int args_len)
+{
+	int i;
+
+	intel_sdvo_debug_write(intel_output, cmd, args, args_len);
+
+	for (i = 0; i < args_len; i++) {
+		intel_sdvo_write_byte(intel_output, SDVO_I2C_ARG_0 - i,
+				      ((u8*)args)[i]);
+	}
+
+	intel_sdvo_write_byte(intel_output, SDVO_I2C_OPCODE, cmd);
+}
+
+#ifdef SDVO_DEBUG
+static const char *cmd_status_names[] = {
+	"Power on",
+	"Success",
+	"Not supported",
+	"Invalid arg",
+	"Pending",
+	"Target not specified",
+	"Scaling not supported"
+};
+
+static void intel_sdvo_debug_response(struct intel_output *intel_output,
+				      void *response, int response_len,
+				      u8 status)
+{
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+
+	DRM_DEBUG("%s: R: ", SDVO_NAME(sdvo_priv));
+	for (i = 0; i < response_len; i++)
+		printk("%02X ", ((u8 *)response)[i]);
+	for (; i < 8; i++)
+		printk("   ");
+	if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP)
+		printk("(%s)", cmd_status_names[status]);
+	else
+		printk("(??? %d)", status);
+	printk("\n");
+}
+#else
+#define intel_sdvo_debug_response(o, r, l, s)
+#endif
+
+static u8 intel_sdvo_read_response(struct intel_output *intel_output,
+				   void *response, int response_len)
+{
+	int i;
+	u8 status;
+	u8 retry = 50;
+
+	while (retry--) {
+		/* Read the command response */
+		for (i = 0; i < response_len; i++) {
+			intel_sdvo_read_byte(intel_output,
+					     SDVO_I2C_RETURN_0 + i,
+					     &((u8 *)response)[i]);
+		}
+
+		/* read the return status */
+		intel_sdvo_read_byte(intel_output, SDVO_I2C_CMD_STATUS,
+				     &status);
+
+		intel_sdvo_debug_response(intel_output, response, response_len,
+					  status);
+		if (status != SDVO_CMD_STATUS_PENDING)
+			return status;
+
+		mdelay(50);
+	}
+
+	return status;
+}
+
+int intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode)
+{
+	if (mode->clock >= 100000)
+		return 1;
+	else if (mode->clock >= 50000)
+		return 2;
+	else
+		return 4;
+}
+
+/**
+ * Don't check status code from this as it switches the bus back to the
+ * SDVO chips which defeats the purpose of doing a bus switch in the first
+ * place.
+ */
+void intel_sdvo_set_control_bus_switch(struct intel_output *intel_output, u8 target)
+{
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &target, 1);
+}
+
+static bool intel_sdvo_set_target_input(struct intel_output *intel_output, bool target_0, bool target_1)
+{
+	struct intel_sdvo_set_target_input_args targets = {0};
+	u8 status;
+
+	if (target_0 && target_1)
+		return SDVO_CMD_STATUS_NOTSUPP;
+
+	if (target_1)
+		targets.target_1 = 1;
+
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_TARGET_INPUT, &targets,
+			     sizeof(targets));
+
+	status = intel_sdvo_read_response(intel_output, NULL, 0);
+
+	return (status == SDVO_CMD_STATUS_SUCCESS);
+}
+
+/**
+ * Return whether each input is trained.
+ *
+ * This function is making an assumption about the layout of the response,
+ * which should be checked against the docs.
+ */
+static bool intel_sdvo_get_trained_inputs(struct intel_output *intel_output, bool *input_1, bool *input_2)
+{
+	struct intel_sdvo_get_trained_inputs_response response;
+	u8 status;
+
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_TRAINED_INPUTS, NULL, 0);
+	status = intel_sdvo_read_response(intel_output, &response, sizeof(response));
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	*input_1 = response.input0_trained;
+	*input_2 = response.input1_trained;
+	return true;
+}
+
+static bool intel_sdvo_get_active_outputs(struct intel_output *intel_output,
+					  u16 *outputs)
+{
+	u8 status;
+
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_OUTPUTS, NULL, 0);
+	status = intel_sdvo_read_response(intel_output, outputs, sizeof(*outputs));
+
+	return (status == SDVO_CMD_STATUS_SUCCESS);
+}
+
+static bool intel_sdvo_set_active_outputs(struct intel_output *intel_output,
+					  u16 outputs)
+{
+	u8 status;
+
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_OUTPUTS, &outputs,
+			     sizeof(outputs));
+	status = intel_sdvo_read_response(intel_output, NULL, 0);
+	return (status == SDVO_CMD_STATUS_SUCCESS);
+}
+
+static bool intel_sdvo_set_encoder_power_state(struct intel_output *intel_output,
+					       int mode)
+{
+	u8 status, state = SDVO_ENCODER_STATE_ON;
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		state = SDVO_ENCODER_STATE_ON;
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+		state = SDVO_ENCODER_STATE_STANDBY;
+		break;
+	case DRM_MODE_DPMS_SUSPEND:
+		state = SDVO_ENCODER_STATE_SUSPEND;
+		break;
+	case DRM_MODE_DPMS_OFF:
+		state = SDVO_ENCODER_STATE_OFF;
+		break;
+	}
+
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ENCODER_POWER_STATE, &state,
+			     sizeof(state));
+	status = intel_sdvo_read_response(intel_output, NULL, 0);
+
+	return (status == SDVO_CMD_STATUS_SUCCESS);
+}
+
+static bool intel_sdvo_get_input_pixel_clock_range(struct intel_output *intel_output,
+						   int *clock_min,
+						   int *clock_max)
+{
+	struct intel_sdvo_pixel_clock_range clocks;
+	u8 status;
+
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE,
+			     NULL, 0);
+
+	status = intel_sdvo_read_response(intel_output, &clocks, sizeof(clocks));
+
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	/* Convert the values from units of 10 kHz to kHz. */
+	*clock_min = clocks.min * 10;
+	*clock_max = clocks.max * 10;
+
+	return true;
+}
+
+static bool intel_sdvo_set_target_output(struct intel_output *intel_output,
+					 u16 outputs)
+{
+	u8 status;
+
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_TARGET_OUTPUT, &outputs,
+			     sizeof(outputs));
+
+	status = intel_sdvo_read_response(intel_output, NULL, 0);
+	return (status == SDVO_CMD_STATUS_SUCCESS);
+}
+
+static bool intel_sdvo_get_timing(struct intel_output *intel_output, u8 cmd,
+				  struct intel_sdvo_dtd *dtd)
+{
+	u8 status;
+
+	intel_sdvo_write_cmd(intel_output, cmd, NULL, 0);
+	status = intel_sdvo_read_response(intel_output, &dtd->part1,
+					  sizeof(dtd->part1));
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	intel_sdvo_write_cmd(intel_output, cmd + 1, NULL, 0);
+	status = intel_sdvo_read_response(intel_output, &dtd->part2,
+					  sizeof(dtd->part2));
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	return true;
+}
+
+static bool intel_sdvo_get_input_timing(struct intel_output *intel_output,
+					 struct intel_sdvo_dtd *dtd)
+{
+	return intel_sdvo_get_timing(intel_output,
+				     SDVO_CMD_GET_INPUT_TIMINGS_PART1, dtd);
+}
+
+static bool intel_sdvo_get_output_timing(struct intel_output *intel_output,
+					 struct intel_sdvo_dtd *dtd)
+{
+	return intel_sdvo_get_timing(intel_output,
+				     SDVO_CMD_GET_OUTPUT_TIMINGS_PART1, dtd);
+}
+
+static bool intel_sdvo_set_timing(struct intel_output *intel_output, u8 cmd,
+				  struct intel_sdvo_dtd *dtd)
+{
+	u8 status;
+
+	intel_sdvo_write_cmd(intel_output, cmd, &dtd->part1, sizeof(dtd->part1));
+	status = intel_sdvo_read_response(intel_output, NULL, 0);
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	intel_sdvo_write_cmd(intel_output, cmd + 1, &dtd->part2, sizeof(dtd->part2));
+	status = intel_sdvo_read_response(intel_output, NULL, 0);
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	return true;
+}
+
+static bool intel_sdvo_set_input_timing(struct intel_output *intel_output,
+					 struct intel_sdvo_dtd *dtd)
+{
+	return intel_sdvo_set_timing(intel_output,
+				     SDVO_CMD_SET_INPUT_TIMINGS_PART1, dtd);
+}
+
+static bool intel_sdvo_set_output_timing(struct intel_output *intel_output,
+					 struct intel_sdvo_dtd *dtd)
+{
+	return intel_sdvo_set_timing(intel_output,
+				     SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, dtd);
+}
+
+
+static int intel_sdvo_get_clock_rate_mult(struct intel_output *intel_output)
+{
+	u8 response, status;
+
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_CLOCK_RATE_MULT, NULL, 0);
+	status = intel_sdvo_read_response(intel_output, &response, 1);
+
+	if (status != SDVO_CMD_STATUS_SUCCESS) {
+		DRM_DEBUG("Couldn't get SDVO clock rate multiplier\n");
+		return SDVO_CLOCK_RATE_MULT_1X;
+	} else {
+		DRM_DEBUG("Current clock rate multiplier: %d\n", response);
+	}
+
+	return response;
+}
+
+static bool intel_sdvo_set_clock_rate_mult(struct intel_output *intel_output, u8 val)
+{
+	u8 status;
+
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CLOCK_RATE_MULT, &val, 1);
+	status = intel_sdvo_read_response(intel_output, NULL, 0);
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	return true;
+}
+
+static bool intel_sdvo_mode_fixup(struct drm_encoder *encoder,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	/* Make the CRTC code factor in the SDVO pixel multiplier.  The SDVO
+	 * device will be told of the multiplier during mode_set.
+	 */
+	adjusted_mode->clock *= intel_sdvo_get_pixel_multiplier(mode);
+	return true;
+}
+
+static void intel_sdvo_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	u16 width, height;
+	u16 h_blank_len, h_sync_len, v_blank_len, v_sync_len;
+	u16 h_sync_offset, v_sync_offset;
+	u32 sdvox;
+	struct intel_sdvo_dtd output_dtd;
+	int sdvo_pixel_multiply;
+
+	if (!mode)
+		return;
+
+	width = mode->crtc_hdisplay;
+	height = mode->crtc_vdisplay;
+
+	/* do some mode translations */
+	h_blank_len = mode->crtc_hblank_end - mode->crtc_hblank_start;
+	h_sync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
+
+	v_blank_len = mode->crtc_vblank_end - mode->crtc_vblank_start;
+	v_sync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
+
+	h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start;
+	v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start;
+
+	output_dtd.part1.clock = mode->clock / 10;
+	output_dtd.part1.h_active = width & 0xff;
+	output_dtd.part1.h_blank = h_blank_len & 0xff;
+	output_dtd.part1.h_high = (((width >> 8) & 0xf) << 4) |
+		((h_blank_len >> 8) & 0xf);
+	output_dtd.part1.v_active = height & 0xff;
+	output_dtd.part1.v_blank = v_blank_len & 0xff;
+	output_dtd.part1.v_high = (((height >> 8) & 0xf) << 4) |
+		((v_blank_len >> 8) & 0xf);
+
+	output_dtd.part2.h_sync_off = h_sync_offset;
+	output_dtd.part2.h_sync_width = h_sync_len & 0xff;
+	output_dtd.part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 |
+		(v_sync_len & 0xf);
+	output_dtd.part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) |
+		((h_sync_len & 0x300) >> 4) | ((v_sync_offset & 0x30) >> 2) |
+		((v_sync_len & 0x30) >> 4);
+
+	output_dtd.part2.dtd_flags = 0x18;
+	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+		output_dtd.part2.dtd_flags |= 0x2;
+	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+		output_dtd.part2.dtd_flags |= 0x4;
+
+	output_dtd.part2.sdvo_flags = 0;
+	output_dtd.part2.v_sync_off_high = v_sync_offset & 0xc0;
+	output_dtd.part2.reserved = 0;
+
+	/* Set the output timing to the screen */
+	intel_sdvo_set_target_output(intel_output, sdvo_priv->active_outputs);
+	intel_sdvo_set_output_timing(intel_output, &output_dtd);
+
+	/* Set the input timing to the screen. Assume always input 0. */
+	intel_sdvo_set_target_input(intel_output, true, false);
+
+	/* We would like to use i830_sdvo_create_preferred_input_timing() to
+	 * provide the device with a timing it can support, if it supports that
+	 * feature.  However, presumably we would need to adjust the CRTC to
+	 * output the preferred timing, and we don't support that currently.
+	 */
+	intel_sdvo_set_input_timing(intel_output, &output_dtd);
+
+	switch (intel_sdvo_get_pixel_multiplier(mode)) {
+	case 1:
+		intel_sdvo_set_clock_rate_mult(intel_output,
+					       SDVO_CLOCK_RATE_MULT_1X);
+		break;
+	case 2:
+		intel_sdvo_set_clock_rate_mult(intel_output,
+					       SDVO_CLOCK_RATE_MULT_2X);
+		break;
+	case 4:
+		intel_sdvo_set_clock_rate_mult(intel_output,
+					       SDVO_CLOCK_RATE_MULT_4X);
+		break;
+	}
+
+	/* Set the SDVO control regs. */
+        if (0/*IS_I965GM(dev)*/) {
+                sdvox = SDVO_BORDER_ENABLE;
+        } else {
+                sdvox = I915_READ(sdvo_priv->output_device);
+                switch (sdvo_priv->output_device) {
+                case SDVOB:
+                        sdvox &= SDVOB_PRESERVE_MASK;
+                        break;
+                case SDVOC:
+                        sdvox &= SDVOC_PRESERVE_MASK;
+                        break;
+                }
+                sdvox |= (9 << 19) | SDVO_BORDER_ENABLE;
+        }
+	if (intel_crtc->pipe == 1)
+		sdvox |= SDVO_PIPE_B_SELECT;
+
+	sdvo_pixel_multiply = intel_sdvo_get_pixel_multiplier(mode);
+	if (IS_I965G(dev)) {
+		/* done in crtc_mode_set as the dpll_md reg must be written
+		   early */
+	} else if (IS_I945G(dev) || IS_I945GM(dev)) {
+		/* done in crtc_mode_set as it lives inside the
+		   dpll register */
+	} else {
+		sdvox |= (sdvo_pixel_multiply - 1) << SDVO_PORT_MULTIPLY_SHIFT;
+	}
+
+	intel_sdvo_write_sdvox(intel_output, sdvox);
+}
+
+static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	u32 temp;
+
+	if (mode != DRM_MODE_DPMS_ON) {
+		intel_sdvo_set_active_outputs(intel_output, 0);
+		if (0)
+			intel_sdvo_set_encoder_power_state(intel_output, mode);
+
+		if (mode == DRM_MODE_DPMS_OFF) {
+			temp = I915_READ(sdvo_priv->output_device);
+			if ((temp & SDVO_ENABLE) != 0) {
+				intel_sdvo_write_sdvox(intel_output, temp & ~SDVO_ENABLE);
+			}
+		}
+	} else {
+		bool input1, input2;
+		int i;
+		u8 status;
+
+		temp = I915_READ(sdvo_priv->output_device);
+		if ((temp & SDVO_ENABLE) == 0)
+			intel_sdvo_write_sdvox(intel_output, temp | SDVO_ENABLE);
+		for (i = 0; i < 2; i++)
+		  intel_wait_for_vblank(dev);
+
+		status = intel_sdvo_get_trained_inputs(intel_output, &input1,
+						       &input2);
+
+
+		/* Warn if the device reported failure to sync.
+		 * A lot of SDVO devices fail to notify of sync, but it's
+		 * a given it the status is a success, we succeeded.
+		 */
+		if (status == SDVO_CMD_STATUS_SUCCESS && !input1) {
+			DRM_DEBUG("First %s output reported failure to sync\n",
+				   SDVO_NAME(sdvo_priv));
+		}
+
+		if (0)
+			intel_sdvo_set_encoder_power_state(intel_output, mode);
+		intel_sdvo_set_active_outputs(intel_output, sdvo_priv->active_outputs);
+	}
+	return;
+}
+
+static void intel_sdvo_save(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	int o;
+
+	sdvo_priv->save_sdvo_mult = intel_sdvo_get_clock_rate_mult(intel_output);
+	intel_sdvo_get_active_outputs(intel_output, &sdvo_priv->save_active_outputs);
+
+	if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) {
+		intel_sdvo_set_target_input(intel_output, true, false);
+		intel_sdvo_get_input_timing(intel_output,
+					    &sdvo_priv->save_input_dtd_1);
+	}
+
+	if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) {
+		intel_sdvo_set_target_input(intel_output, false, true);
+		intel_sdvo_get_input_timing(intel_output,
+					    &sdvo_priv->save_input_dtd_2);
+	}
+
+	for (o = SDVO_OUTPUT_FIRST; o <= SDVO_OUTPUT_LAST; o++)
+	{
+	        u16  this_output = (1 << o);
+		if (sdvo_priv->caps.output_flags & this_output)
+		{
+			intel_sdvo_set_target_output(intel_output, this_output);
+			intel_sdvo_get_output_timing(intel_output,
+						     &sdvo_priv->save_output_dtd[o]);
+		}
+	}
+
+	sdvo_priv->save_SDVOX = I915_READ(sdvo_priv->output_device);
+}
+
+static void intel_sdvo_restore(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+	int o;
+	int i;
+	bool input1, input2;
+	u8 status;
+
+	intel_sdvo_set_active_outputs(intel_output, 0);
+
+	for (o = SDVO_OUTPUT_FIRST; o <= SDVO_OUTPUT_LAST; o++)
+	{
+		u16  this_output = (1 << o);
+		if (sdvo_priv->caps.output_flags & this_output) {
+			intel_sdvo_set_target_output(intel_output, this_output);
+			intel_sdvo_set_output_timing(intel_output, &sdvo_priv->save_output_dtd[o]);
+		}
+	}
+
+	if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) {
+		intel_sdvo_set_target_input(intel_output, true, false);
+		intel_sdvo_set_input_timing(intel_output, &sdvo_priv->save_input_dtd_1);
+	}
+
+	if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) {
+		intel_sdvo_set_target_input(intel_output, false, true);
+		intel_sdvo_set_input_timing(intel_output, &sdvo_priv->save_input_dtd_2);
+	}
+
+	intel_sdvo_set_clock_rate_mult(intel_output, sdvo_priv->save_sdvo_mult);
+
+	I915_WRITE(sdvo_priv->output_device, sdvo_priv->save_SDVOX);
+
+	if (sdvo_priv->save_SDVOX & SDVO_ENABLE)
+	{
+		for (i = 0; i < 2; i++)
+			intel_wait_for_vblank(dev);
+		status = intel_sdvo_get_trained_inputs(intel_output, &input1, &input2);
+		if (status == SDVO_CMD_STATUS_SUCCESS && !input1)
+			DRM_DEBUG("First %s output reported failure to sync\n",
+				   SDVO_NAME(sdvo_priv));
+	}
+
+	intel_sdvo_set_active_outputs(intel_output, sdvo_priv->save_active_outputs);
+}
+
+static int intel_sdvo_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	if (sdvo_priv->pixel_clock_min > mode->clock)
+		return MODE_CLOCK_LOW;
+
+	if (sdvo_priv->pixel_clock_max < mode->clock)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static bool intel_sdvo_get_capabilities(struct intel_output *intel_output, struct intel_sdvo_caps *caps)
+{
+	u8 status;
+
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_DEVICE_CAPS, NULL, 0);
+	status = intel_sdvo_read_response(intel_output, caps, sizeof(*caps));
+	if (status != SDVO_CMD_STATUS_SUCCESS)
+		return false;
+
+	return true;
+}
+
+struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB)
+{
+	struct drm_connector *connector = NULL;
+	struct intel_output *iout = NULL;
+	struct intel_sdvo_priv *sdvo;
+
+	/* find the sdvo connector */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		iout = to_intel_output(connector);
+
+		if (iout->type != INTEL_OUTPUT_SDVO)
+			continue;
+
+		sdvo = iout->dev_priv;
+
+		if (sdvo->output_device == SDVOB && sdvoB)
+			return connector;
+
+		if (sdvo->output_device == SDVOC && !sdvoB)
+			return connector;
+
+	}
+
+	return NULL;
+}
+
+int intel_sdvo_supports_hotplug(struct drm_connector *connector)
+{
+	u8 response[2];
+	u8 status;
+	struct intel_output *intel_output;
+	DRM_DEBUG("\n");
+
+	if (!connector)
+		return 0;
+
+	intel_output = to_intel_output(connector);
+
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0);
+	status = intel_sdvo_read_response(intel_output, &response, 2);
+
+	if (response[0] !=0)
+		return 1;
+
+	return 0;
+}
+
+void intel_sdvo_set_hotplug(struct drm_connector *connector, int on)
+{
+	u8 response[2];
+	u8 status;
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
+	intel_sdvo_read_response(intel_output, &response, 2);
+
+	if (on) {
+		intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0);
+		status = intel_sdvo_read_response(intel_output, &response, 2);
+
+		intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
+	} else {
+		response[0] = 0;
+		response[1] = 0;
+		intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
+	}
+
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
+	intel_sdvo_read_response(intel_output, &response, 2);
+}
+
+static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector)
+{
+	u8 response[2];
+	u8 status;
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0);
+	status = intel_sdvo_read_response(intel_output, &response, 2);
+
+	DRM_DEBUG("SDVO response %d %d\n", response[0], response[1]);
+	if ((response[0] != 0) || (response[1] != 0))
+		return connector_status_connected;
+	else
+		return connector_status_disconnected;
+}
+
+static int intel_sdvo_get_modes(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	/* set the bus switch and get the modes */
+	intel_sdvo_set_control_bus_switch(intel_output, SDVO_CONTROL_BUS_DDC2);
+	intel_ddc_get_modes(intel_output);
+
+	if (list_empty(&connector->probed_modes))
+		return 0;
+	return 1;
+}
+
+static void intel_sdvo_destroy(struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	if (intel_output->i2c_bus)
+		intel_i2c_destroy(intel_output->i2c_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(intel_output);
+}
+
+static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
+	.dpms = intel_sdvo_dpms,
+	.mode_fixup = intel_sdvo_mode_fixup,
+	.prepare = intel_encoder_prepare,
+	.mode_set = intel_sdvo_mode_set,
+	.commit = intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
+	.save = intel_sdvo_save,
+	.restore = intel_sdvo_restore,
+	.detect = intel_sdvo_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = intel_sdvo_destroy,
+};
+
+static const struct drm_connector_helper_funcs intel_sdvo_connector_helper_funcs = {
+	.get_modes = intel_sdvo_get_modes,
+	.mode_valid = intel_sdvo_mode_valid,
+	.best_encoder = intel_best_encoder,
+};
+
+void intel_sdvo_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs intel_sdvo_enc_funcs = {
+	.destroy = intel_sdvo_enc_destroy,
+};
+
+
+void intel_sdvo_init(struct drm_device *dev, int output_device)
+{
+	struct drm_connector *connector;
+	struct intel_output *intel_output;
+	struct intel_sdvo_priv *sdvo_priv;
+	struct intel_i2c_chan *i2cbus = NULL;
+	int connector_type;
+	u8 ch[0x40];
+	int i;
+	int encoder_type, output_id;
+
+	intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL);
+	if (!intel_output) {
+		return;
+	}
+
+	connector = &intel_output->base;
+
+	drm_connector_init(dev, connector, &intel_sdvo_connector_funcs,
+			   DRM_MODE_CONNECTOR_Unknown);
+	drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs);
+	sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1);
+	intel_output->type = INTEL_OUTPUT_SDVO;
+
+	connector->interlace_allowed = 0;
+	connector->doublescan_allowed = 0;
+
+	/* setup the DDC bus. */
+	if (output_device == SDVOB)
+		i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
+	else
+		i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
+
+	if (!i2cbus)
+		goto err_connector;
+
+	sdvo_priv->i2c_bus = i2cbus;
+
+	if (output_device == SDVOB) {
+		output_id = 1;
+		sdvo_priv->i2c_bus->slave_addr = 0x38;
+	} else {
+		output_id = 2;
+		sdvo_priv->i2c_bus->slave_addr = 0x39;
+	}
+
+	sdvo_priv->output_device = output_device;
+	intel_output->i2c_bus = i2cbus;
+	intel_output->dev_priv = sdvo_priv;
+
+
+	/* Read the regs to test if we can talk to the device */
+	for (i = 0; i < 0x40; i++) {
+		if (!intel_sdvo_read_byte(intel_output, i, &ch[i])) {
+			DRM_DEBUG("No SDVO device found on SDVO%c\n",
+				  output_device == SDVOB ? 'B' : 'C');
+			goto err_i2c;
+		}
+	}
+
+	intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps);
+
+	memset(&sdvo_priv->active_outputs, 0, sizeof(sdvo_priv->active_outputs));
+
+	/* TODO, CVBS, SVID, YPRPB & SCART outputs. */
+	if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0)
+	{
+		sdvo_priv->active_outputs = SDVO_OUTPUT_RGB0;
+		connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+		encoder_type = DRM_MODE_ENCODER_DAC;
+		connector_type = DRM_MODE_CONNECTOR_VGA;
+	}
+	else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1)
+	{
+		sdvo_priv->active_outputs = SDVO_OUTPUT_RGB1;
+		connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+		encoder_type = DRM_MODE_ENCODER_DAC;
+		connector_type = DRM_MODE_CONNECTOR_VGA;
+	}
+	else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS0)
+	{
+		sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS0;
+		connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+		encoder_type = DRM_MODE_ENCODER_TMDS;
+		connector_type = DRM_MODE_CONNECTOR_DVID;
+	}
+	else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_TMDS1)
+	{
+		sdvo_priv->active_outputs = SDVO_OUTPUT_TMDS1;
+		connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+		encoder_type = DRM_MODE_ENCODER_TMDS;
+		connector_type = DRM_MODE_CONNECTOR_DVID;
+	}
+	else
+	{
+		unsigned char bytes[2];
+
+		memcpy (bytes, &sdvo_priv->caps.output_flags, 2);
+		DRM_DEBUG("%s: No active RGB or TMDS outputs (0x%02x%02x)\n",
+			  SDVO_NAME(sdvo_priv),
+			  bytes[0], bytes[1]);
+		goto err_i2c;
+	}
+
+	drm_encoder_init(dev, &intel_output->enc, &intel_sdvo_enc_funcs, encoder_type);
+	drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs);
+	connector->connector_type = connector_type;
+
+	drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
+	drm_sysfs_connector_add(connector);
+
+	/* Set the input timing to the screen. Assume always input 0. */
+	intel_sdvo_set_target_input(intel_output, true, false);
+
+	intel_sdvo_get_input_pixel_clock_range(intel_output,
+					       &sdvo_priv->pixel_clock_min,
+					       &sdvo_priv->pixel_clock_max);
+
+
+	DRM_DEBUG("%s device VID/DID: %02X:%02X.%02X, "
+		  "clock range %dMHz - %dMHz, "
+		  "input 1: %c, input 2: %c, "
+		  "output 1: %c, output 2: %c\n",
+		  SDVO_NAME(sdvo_priv),
+		  sdvo_priv->caps.vendor_id, sdvo_priv->caps.device_id,
+		  sdvo_priv->caps.device_rev_id,
+		  sdvo_priv->pixel_clock_min / 1000,
+		  sdvo_priv->pixel_clock_max / 1000,
+		  (sdvo_priv->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N',
+		  (sdvo_priv->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N',
+		  /* check currently supported outputs */
+		  sdvo_priv->caps.output_flags &
+			(SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N',
+		  sdvo_priv->caps.output_flags &
+			(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
+
+	intel_output->ddc_bus = i2cbus;
+
+	return;
+
+err_i2c:
+	intel_i2c_destroy(intel_output->i2c_bus);
+err_connector:
+	drm_connector_cleanup(connector);
+	kfree(intel_output);
+
+	return;
+}
diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h
new file mode 100644
index 00000000000..861a43f8693
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h
@@ -0,0 +1,327 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+/**
+ * @file SDVO command definitions and structures.
+ */
+
+#define SDVO_OUTPUT_FIRST   (0)
+#define SDVO_OUTPUT_TMDS0   (1 << 0)
+#define SDVO_OUTPUT_RGB0    (1 << 1)
+#define SDVO_OUTPUT_CVBS0   (1 << 2)
+#define SDVO_OUTPUT_SVID0   (1 << 3)
+#define SDVO_OUTPUT_YPRPB0  (1 << 4)
+#define SDVO_OUTPUT_SCART0  (1 << 5)
+#define SDVO_OUTPUT_LVDS0   (1 << 6)
+#define SDVO_OUTPUT_TMDS1   (1 << 8)
+#define SDVO_OUTPUT_RGB1    (1 << 9)
+#define SDVO_OUTPUT_CVBS1   (1 << 10)
+#define SDVO_OUTPUT_SVID1   (1 << 11)
+#define SDVO_OUTPUT_YPRPB1  (1 << 12)
+#define SDVO_OUTPUT_SCART1  (1 << 13)
+#define SDVO_OUTPUT_LVDS1   (1 << 14)
+#define SDVO_OUTPUT_LAST    (14)
+
+struct intel_sdvo_caps {
+    u8 vendor_id;
+    u8 device_id;
+    u8 device_rev_id;
+    u8 sdvo_version_major;
+    u8 sdvo_version_minor;
+    unsigned int sdvo_inputs_mask:2;
+    unsigned int smooth_scaling:1;
+    unsigned int sharp_scaling:1;
+    unsigned int up_scaling:1;
+    unsigned int down_scaling:1;
+    unsigned int stall_support:1;
+    unsigned int pad:1;
+    u16 output_flags;
+} __attribute__((packed));
+
+/** This matches the EDID DTD structure, more or less */
+struct intel_sdvo_dtd {
+    struct {
+	u16 clock;		/**< pixel clock, in 10kHz units */
+	u8 h_active;		/**< lower 8 bits (pixels) */
+	u8 h_blank;		/**< lower 8 bits (pixels) */
+	u8 h_high;		/**< upper 4 bits each h_active, h_blank */
+	u8 v_active;		/**< lower 8 bits (lines) */
+	u8 v_blank;		/**< lower 8 bits (lines) */
+	u8 v_high;		/**< upper 4 bits each v_active, v_blank */
+    } part1;
+
+    struct {
+	u8 h_sync_off;	/**< lower 8 bits, from hblank start */
+	u8 h_sync_width;	/**< lower 8 bits (pixels) */
+	/** lower 4 bits each vsync offset, vsync width */
+	u8 v_sync_off_width;
+	/**
+	 * 2 high bits of hsync offset, 2 high bits of hsync width,
+	 * bits 4-5 of vsync offset, and 2 high bits of vsync width.
+	 */
+	u8 sync_off_width_high;
+	u8 dtd_flags;
+	u8 sdvo_flags;
+	/** bits 6-7 of vsync offset at bits 6-7 */
+	u8 v_sync_off_high;
+	u8 reserved;
+    } part2;
+} __attribute__((packed));
+
+struct intel_sdvo_pixel_clock_range {
+    u16 min;			/**< pixel clock, in 10kHz units */
+    u16 max;			/**< pixel clock, in 10kHz units */
+} __attribute__((packed));
+
+struct intel_sdvo_preferred_input_timing_args {
+    u16 clock;
+    u16 width;
+    u16 height;
+} __attribute__((packed));
+
+/* I2C registers for SDVO */
+#define SDVO_I2C_ARG_0				0x07
+#define SDVO_I2C_ARG_1				0x06
+#define SDVO_I2C_ARG_2				0x05
+#define SDVO_I2C_ARG_3				0x04
+#define SDVO_I2C_ARG_4				0x03
+#define SDVO_I2C_ARG_5				0x02
+#define SDVO_I2C_ARG_6				0x01
+#define SDVO_I2C_ARG_7				0x00
+#define SDVO_I2C_OPCODE				0x08
+#define SDVO_I2C_CMD_STATUS			0x09
+#define SDVO_I2C_RETURN_0			0x0a
+#define SDVO_I2C_RETURN_1			0x0b
+#define SDVO_I2C_RETURN_2			0x0c
+#define SDVO_I2C_RETURN_3			0x0d
+#define SDVO_I2C_RETURN_4			0x0e
+#define SDVO_I2C_RETURN_5			0x0f
+#define SDVO_I2C_RETURN_6			0x10
+#define SDVO_I2C_RETURN_7			0x11
+#define SDVO_I2C_VENDOR_BEGIN			0x20
+
+/* Status results */
+#define SDVO_CMD_STATUS_POWER_ON		0x0
+#define SDVO_CMD_STATUS_SUCCESS			0x1
+#define SDVO_CMD_STATUS_NOTSUPP			0x2
+#define SDVO_CMD_STATUS_INVALID_ARG		0x3
+#define SDVO_CMD_STATUS_PENDING			0x4
+#define SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED	0x5
+#define SDVO_CMD_STATUS_SCALING_NOT_SUPP	0x6
+
+/* SDVO commands, argument/result registers */
+
+#define SDVO_CMD_RESET					0x01
+
+/** Returns a struct intel_sdvo_caps */
+#define SDVO_CMD_GET_DEVICE_CAPS			0x02
+
+#define SDVO_CMD_GET_FIRMWARE_REV			0x86
+# define SDVO_DEVICE_FIRMWARE_MINOR			SDVO_I2C_RETURN_0
+# define SDVO_DEVICE_FIRMWARE_MAJOR			SDVO_I2C_RETURN_1
+# define SDVO_DEVICE_FIRMWARE_PATCH			SDVO_I2C_RETURN_2
+
+/**
+ * Reports which inputs are trained (managed to sync).
+ *
+ * Devices must have trained within 2 vsyncs of a mode change.
+ */
+#define SDVO_CMD_GET_TRAINED_INPUTS			0x03
+struct intel_sdvo_get_trained_inputs_response {
+    unsigned int input0_trained:1;
+    unsigned int input1_trained:1;
+    unsigned int pad:6;
+} __attribute__((packed));
+
+/** Returns a struct intel_sdvo_output_flags of active outputs. */
+#define SDVO_CMD_GET_ACTIVE_OUTPUTS			0x04
+
+/**
+ * Sets the current set of active outputs.
+ *
+ * Takes a struct intel_sdvo_output_flags.  Must be preceded by a SET_IN_OUT_MAP
+ * on multi-output devices.
+ */
+#define SDVO_CMD_SET_ACTIVE_OUTPUTS			0x05
+
+/**
+ * Returns the current mapping of SDVO inputs to outputs on the device.
+ *
+ * Returns two struct intel_sdvo_output_flags structures.
+ */
+#define SDVO_CMD_GET_IN_OUT_MAP				0x06
+
+/**
+ * Sets the current mapping of SDVO inputs to outputs on the device.
+ *
+ * Takes two struct i380_sdvo_output_flags structures.
+ */
+#define SDVO_CMD_SET_IN_OUT_MAP				0x07
+
+/**
+ * Returns a struct intel_sdvo_output_flags of attached displays.
+ */
+#define SDVO_CMD_GET_ATTACHED_DISPLAYS			0x0b
+
+/**
+ * Returns a struct intel_sdvo_ouptut_flags of displays supporting hot plugging.
+ */
+#define SDVO_CMD_GET_HOT_PLUG_SUPPORT			0x0c
+
+/**
+ * Takes a struct intel_sdvo_output_flags.
+ */
+#define SDVO_CMD_SET_ACTIVE_HOT_PLUG			0x0d
+
+/**
+ * Returns a struct intel_sdvo_output_flags of displays with hot plug
+ * interrupts enabled.
+ */
+#define SDVO_CMD_GET_ACTIVE_HOT_PLUG			0x0e
+
+#define SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE		0x0f
+struct intel_sdvo_get_interrupt_event_source_response {
+    u16 interrupt_status;
+    unsigned int ambient_light_interrupt:1;
+    unsigned int pad:7;
+} __attribute__((packed));
+
+/**
+ * Selects which input is affected by future input commands.
+ *
+ * Commands affected include SET_INPUT_TIMINGS_PART[12],
+ * GET_INPUT_TIMINGS_PART[12], GET_PREFERRED_INPUT_TIMINGS_PART[12],
+ * GET_INPUT_PIXEL_CLOCK_RANGE, and CREATE_PREFERRED_INPUT_TIMINGS.
+ */
+#define SDVO_CMD_SET_TARGET_INPUT			0x10
+struct intel_sdvo_set_target_input_args {
+    unsigned int target_1:1;
+    unsigned int pad:7;
+} __attribute__((packed));
+
+/**
+ * Takes a struct intel_sdvo_output_flags of which outputs are targetted by
+ * future output commands.
+ *
+ * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12],
+ * GET_OUTPUT_TIMINGS_PART[12], and GET_OUTPUT_PIXEL_CLOCK_RANGE.
+ */
+#define SDVO_CMD_SET_TARGET_OUTPUT			0x11
+
+#define SDVO_CMD_GET_INPUT_TIMINGS_PART1		0x12
+#define SDVO_CMD_GET_INPUT_TIMINGS_PART2		0x13
+#define SDVO_CMD_SET_INPUT_TIMINGS_PART1		0x14
+#define SDVO_CMD_SET_INPUT_TIMINGS_PART2		0x15
+#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART1		0x16
+#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART2		0x17
+#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART1		0x18
+#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART2		0x19
+/* Part 1 */
+# define SDVO_DTD_CLOCK_LOW				SDVO_I2C_ARG_0
+# define SDVO_DTD_CLOCK_HIGH				SDVO_I2C_ARG_1
+# define SDVO_DTD_H_ACTIVE				SDVO_I2C_ARG_2
+# define SDVO_DTD_H_BLANK				SDVO_I2C_ARG_3
+# define SDVO_DTD_H_HIGH				SDVO_I2C_ARG_4
+# define SDVO_DTD_V_ACTIVE				SDVO_I2C_ARG_5
+# define SDVO_DTD_V_BLANK				SDVO_I2C_ARG_6
+# define SDVO_DTD_V_HIGH				SDVO_I2C_ARG_7
+/* Part 2 */
+# define SDVO_DTD_HSYNC_OFF				SDVO_I2C_ARG_0
+# define SDVO_DTD_HSYNC_WIDTH				SDVO_I2C_ARG_1
+# define SDVO_DTD_VSYNC_OFF_WIDTH			SDVO_I2C_ARG_2
+# define SDVO_DTD_SYNC_OFF_WIDTH_HIGH			SDVO_I2C_ARG_3
+# define SDVO_DTD_DTD_FLAGS				SDVO_I2C_ARG_4
+# define SDVO_DTD_DTD_FLAG_INTERLACED				(1 << 7)
+# define SDVO_DTD_DTD_FLAG_STEREO_MASK				(3 << 5)
+# define SDVO_DTD_DTD_FLAG_INPUT_MASK				(3 << 3)
+# define SDVO_DTD_DTD_FLAG_SYNC_MASK				(3 << 1)
+# define SDVO_DTD_SDVO_FLAS				SDVO_I2C_ARG_5
+# define SDVO_DTD_SDVO_FLAG_STALL				(1 << 7)
+# define SDVO_DTD_SDVO_FLAG_CENTERED				(0 << 6)
+# define SDVO_DTD_SDVO_FLAG_UPPER_LEFT				(1 << 6)
+# define SDVO_DTD_SDVO_FLAG_SCALING_MASK			(3 << 4)
+# define SDVO_DTD_SDVO_FLAG_SCALING_NONE			(0 << 4)
+# define SDVO_DTD_SDVO_FLAG_SCALING_SHARP			(1 << 4)
+# define SDVO_DTD_SDVO_FLAG_SCALING_SMOOTH			(2 << 4)
+# define SDVO_DTD_VSYNC_OFF_HIGH			SDVO_I2C_ARG_6
+
+/**
+ * Generates a DTD based on the given width, height, and flags.
+ *
+ * This will be supported by any device supporting scaling or interlaced
+ * modes.
+ */
+#define SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING		0x1a
+# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_LOW		SDVO_I2C_ARG_0
+# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_HIGH		SDVO_I2C_ARG_1
+# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_LOW		SDVO_I2C_ARG_2
+# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_HIGH		SDVO_I2C_ARG_3
+# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_LOW		SDVO_I2C_ARG_4
+# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_HIGH	SDVO_I2C_ARG_5
+# define SDVO_PREFERRED_INPUT_TIMING_FLAGS		SDVO_I2C_ARG_6
+# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_INTERLACED		(1 << 0)
+# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_SCALED		(1 << 1)
+
+#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1	0x1b
+#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2	0x1c
+
+/** Returns a struct intel_sdvo_pixel_clock_range */
+#define SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE		0x1d
+/** Returns a struct intel_sdvo_pixel_clock_range */
+#define SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE		0x1e
+
+/** Returns a byte bitfield containing SDVO_CLOCK_RATE_MULT_* flags */
+#define SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS		0x1f
+
+/** Returns a byte containing a SDVO_CLOCK_RATE_MULT_* flag */
+#define SDVO_CMD_GET_CLOCK_RATE_MULT			0x20
+/** Takes a byte containing a SDVO_CLOCK_RATE_MULT_* flag */
+#define SDVO_CMD_SET_CLOCK_RATE_MULT			0x21
+# define SDVO_CLOCK_RATE_MULT_1X				(1 << 0)
+# define SDVO_CLOCK_RATE_MULT_2X				(1 << 1)
+# define SDVO_CLOCK_RATE_MULT_4X				(1 << 3)
+
+#define SDVO_CMD_GET_SUPPORTED_TV_FORMATS		0x27
+
+#define SDVO_CMD_GET_TV_FORMAT				0x28
+
+#define SDVO_CMD_SET_TV_FORMAT				0x29
+
+#define SDVO_CMD_GET_SUPPORTED_POWER_STATES		0x2a
+#define SDVO_CMD_GET_ENCODER_POWER_STATE		0x2b
+#define SDVO_CMD_SET_ENCODER_POWER_STATE		0x2c
+# define SDVO_ENCODER_STATE_ON					(1 << 0)
+# define SDVO_ENCODER_STATE_STANDBY				(1 << 1)
+# define SDVO_ENCODER_STATE_SUSPEND				(1 << 2)
+# define SDVO_ENCODER_STATE_OFF					(1 << 3)
+
+#define SDVO_CMD_SET_TV_RESOLUTION_SUPPORT		0x93
+
+#define SDVO_CMD_SET_CONTROL_BUS_SWITCH			0x7a
+# define SDVO_CONTROL_BUS_PROM				0x0
+# define SDVO_CONTROL_BUS_DDC1				0x1
+# define SDVO_CONTROL_BUS_DDC2				0x2
+# define SDVO_CONTROL_BUS_DDC3				0x3
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
new file mode 100644
index 00000000000..d409b863788
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -0,0 +1,1725 @@
+/*
+ * Copyright © 2006-2008 Intel Corporation
+ *   Jesse Barnes <jesse.barnes@intel.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eric Anholt <eric@anholt.net>
+ *
+ */
+
+/** @file
+ * Integrated TV-out support for the 915GM and 945GM.
+ */
+
+#include "drmP.h"
+#include "drm.h"
+#include "drm_crtc.h"
+#include "drm_edid.h"
+#include "intel_drv.h"
+#include "i915_drm.h"
+#include "i915_drv.h"
+
+enum tv_margin {
+	TV_MARGIN_LEFT, TV_MARGIN_TOP,
+	TV_MARGIN_RIGHT, TV_MARGIN_BOTTOM
+};
+
+/** Private structure for the integrated TV support */
+struct intel_tv_priv {
+	int type;
+	char *tv_format;
+	int margin[4];
+	u32 save_TV_H_CTL_1;
+	u32 save_TV_H_CTL_2;
+	u32 save_TV_H_CTL_3;
+	u32 save_TV_V_CTL_1;
+	u32 save_TV_V_CTL_2;
+	u32 save_TV_V_CTL_3;
+	u32 save_TV_V_CTL_4;
+	u32 save_TV_V_CTL_5;
+	u32 save_TV_V_CTL_6;
+	u32 save_TV_V_CTL_7;
+	u32 save_TV_SC_CTL_1, save_TV_SC_CTL_2, save_TV_SC_CTL_3;
+
+	u32 save_TV_CSC_Y;
+	u32 save_TV_CSC_Y2;
+	u32 save_TV_CSC_U;
+	u32 save_TV_CSC_U2;
+	u32 save_TV_CSC_V;
+	u32 save_TV_CSC_V2;
+	u32 save_TV_CLR_KNOBS;
+	u32 save_TV_CLR_LEVEL;
+	u32 save_TV_WIN_POS;
+	u32 save_TV_WIN_SIZE;
+	u32 save_TV_FILTER_CTL_1;
+	u32 save_TV_FILTER_CTL_2;
+	u32 save_TV_FILTER_CTL_3;
+
+	u32 save_TV_H_LUMA[60];
+	u32 save_TV_H_CHROMA[60];
+	u32 save_TV_V_LUMA[43];
+	u32 save_TV_V_CHROMA[43];
+
+	u32 save_TV_DAC;
+	u32 save_TV_CTL;
+};
+
+struct video_levels {
+	int blank, black, burst;
+};
+
+struct color_conversion {
+	u16 ry, gy, by, ay;
+	u16 ru, gu, bu, au;
+	u16 rv, gv, bv, av;
+};
+
+static const u32 filter_table[] = {
+	0xB1403000, 0x2E203500, 0x35002E20, 0x3000B140,
+	0x35A0B160, 0x2DC02E80, 0xB1403480, 0xB1603000,
+	0x2EA03640, 0x34002D80, 0x3000B120, 0x36E0B160,
+	0x2D202EF0, 0xB1203380, 0xB1603000, 0x2F303780,
+	0x33002CC0, 0x3000B100, 0x3820B160, 0x2C802F50,
+	0xB10032A0, 0xB1603000, 0x2F9038C0, 0x32202C20,
+	0x3000B0E0, 0x3980B160, 0x2BC02FC0, 0xB0E031C0,
+	0xB1603000, 0x2FF03A20, 0x31602B60, 0xB020B0C0,
+	0x3AE0B160, 0x2B001810, 0xB0C03120, 0xB140B020,
+	0x18283BA0, 0x30C02A80, 0xB020B0A0, 0x3C60B140,
+	0x2A201838, 0xB0A03080, 0xB120B020, 0x18383D20,
+	0x304029C0, 0xB040B080, 0x3DE0B100, 0x29601848,
+	0xB0803000, 0xB100B040, 0x18483EC0, 0xB0402900,
+	0xB040B060, 0x3F80B0C0, 0x28801858, 0xB060B080,
+	0xB0A0B060, 0x18602820, 0xB0A02820, 0x0000B060,
+	0xB1403000, 0x2E203500, 0x35002E20, 0x3000B140,
+	0x35A0B160, 0x2DC02E80, 0xB1403480, 0xB1603000,
+	0x2EA03640, 0x34002D80, 0x3000B120, 0x36E0B160,
+	0x2D202EF0, 0xB1203380, 0xB1603000, 0x2F303780,
+	0x33002CC0, 0x3000B100, 0x3820B160, 0x2C802F50,
+	0xB10032A0, 0xB1603000, 0x2F9038C0, 0x32202C20,
+	0x3000B0E0, 0x3980B160, 0x2BC02FC0, 0xB0E031C0,
+	0xB1603000, 0x2FF03A20, 0x31602B60, 0xB020B0C0,
+	0x3AE0B160, 0x2B001810, 0xB0C03120, 0xB140B020,
+	0x18283BA0, 0x30C02A80, 0xB020B0A0, 0x3C60B140,
+	0x2A201838, 0xB0A03080, 0xB120B020, 0x18383D20,
+	0x304029C0, 0xB040B080, 0x3DE0B100, 0x29601848,
+	0xB0803000, 0xB100B040, 0x18483EC0, 0xB0402900,
+	0xB040B060, 0x3F80B0C0, 0x28801858, 0xB060B080,
+	0xB0A0B060, 0x18602820, 0xB0A02820, 0x0000B060,
+	0x36403000, 0x2D002CC0, 0x30003640, 0x2D0036C0,
+	0x35C02CC0, 0x37403000, 0x2C802D40, 0x30003540,
+	0x2D8037C0, 0x34C02C40, 0x38403000, 0x2BC02E00,
+	0x30003440, 0x2E2038C0, 0x34002B80, 0x39803000,
+	0x2B402E40, 0x30003380, 0x2E603A00, 0x33402B00,
+	0x3A803040, 0x2A802EA0, 0x30403300, 0x2EC03B40,
+	0x32802A40, 0x3C003040, 0x2A002EC0, 0x30803240,
+	0x2EC03C80, 0x320029C0, 0x3D403080, 0x29402F00,
+	0x308031C0, 0x2F203DC0, 0x31802900, 0x3E8030C0,
+	0x28802F40, 0x30C03140, 0x2F203F40, 0x31402840,
+	0x28003100, 0x28002F00, 0x00003100, 0x36403000,
+	0x2D002CC0, 0x30003640, 0x2D0036C0,
+	0x35C02CC0, 0x37403000, 0x2C802D40, 0x30003540,
+	0x2D8037C0, 0x34C02C40, 0x38403000, 0x2BC02E00,
+	0x30003440, 0x2E2038C0, 0x34002B80, 0x39803000,
+	0x2B402E40, 0x30003380, 0x2E603A00, 0x33402B00,
+	0x3A803040, 0x2A802EA0, 0x30403300, 0x2EC03B40,
+	0x32802A40, 0x3C003040, 0x2A002EC0, 0x30803240,
+	0x2EC03C80, 0x320029C0, 0x3D403080, 0x29402F00,
+	0x308031C0, 0x2F203DC0, 0x31802900, 0x3E8030C0,
+	0x28802F40, 0x30C03140, 0x2F203F40, 0x31402840,
+	0x28003100, 0x28002F00, 0x00003100,
+};
+
+/*
+ * Color conversion values have 3 separate fixed point formats:
+ *
+ * 10 bit fields (ay, au)
+ *   1.9 fixed point (b.bbbbbbbbb)
+ * 11 bit fields (ry, by, ru, gu, gv)
+ *   exp.mantissa (ee.mmmmmmmmm)
+ *   ee = 00 = 10^-1 (0.mmmmmmmmm)
+ *   ee = 01 = 10^-2 (0.0mmmmmmmmm)
+ *   ee = 10 = 10^-3 (0.00mmmmmmmmm)
+ *   ee = 11 = 10^-4 (0.000mmmmmmmmm)
+ * 12 bit fields (gy, rv, bu)
+ *   exp.mantissa (eee.mmmmmmmmm)
+ *   eee = 000 = 10^-1 (0.mmmmmmmmm)
+ *   eee = 001 = 10^-2 (0.0mmmmmmmmm)
+ *   eee = 010 = 10^-3 (0.00mmmmmmmmm)
+ *   eee = 011 = 10^-4 (0.000mmmmmmmmm)
+ *   eee = 100 = reserved
+ *   eee = 101 = reserved
+ *   eee = 110 = reserved
+ *   eee = 111 = 10^0 (m.mmmmmmmm) (only usable for 1.0 representation)
+ *
+ * Saturation and contrast are 8 bits, with their own representation:
+ * 8 bit field (saturation, contrast)
+ *   exp.mantissa (ee.mmmmmm)
+ *   ee = 00 = 10^-1 (0.mmmmmm)
+ *   ee = 01 = 10^0 (m.mmmmm)
+ *   ee = 10 = 10^1 (mm.mmmm)
+ *   ee = 11 = 10^2 (mmm.mmm)
+ *
+ * Simple conversion function:
+ *
+ * static u32
+ * float_to_csc_11(float f)
+ * {
+ *     u32 exp;
+ *     u32 mant;
+ *     u32 ret;
+ *
+ *     if (f < 0)
+ *         f = -f;
+ *
+ *     if (f >= 1) {
+ *         exp = 0x7;
+ * 	   mant = 1 << 8;
+ *     } else {
+ *         for (exp = 0; exp < 3 && f < 0.5; exp++)
+ * 	       f *= 2.0;
+ *         mant = (f * (1 << 9) + 0.5);
+ *         if (mant >= (1 << 9))
+ *             mant = (1 << 9) - 1;
+ *     }
+ *     ret = (exp << 9) | mant;
+ *     return ret;
+ * }
+ */
+
+/*
+ * Behold, magic numbers!  If we plant them they might grow a big
+ * s-video cable to the sky... or something.
+ *
+ * Pre-converted to appropriate hex value.
+ */
+
+/*
+ * PAL & NTSC values for composite & s-video connections
+ */
+static const struct color_conversion ntsc_m_csc_composite = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104,
+	.ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0f00,
+	.rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0f00,
+};
+
+static const struct video_levels ntsc_m_levels_composite = {
+	.blank = 225, .black = 267, .burst = 113,
+};
+
+static const struct color_conversion ntsc_m_csc_svideo = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0134,
+	.ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0f00,
+	.rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0f00,
+};
+
+static const struct video_levels ntsc_m_levels_svideo = {
+	.blank = 266, .black = 316, .burst = 133,
+};
+
+static const struct color_conversion ntsc_j_csc_composite = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0119,
+	.ru = 0x074c, .gu = 0x0546, .bu = 0x05ec, .au = 0x0f00,
+	.rv = 0x035a, .gv = 0x0322, .bv = 0x06e1, .av = 0x0f00,
+};
+
+static const struct video_levels ntsc_j_levels_composite = {
+	.blank = 225, .black = 225, .burst = 113,
+};
+
+static const struct color_conversion ntsc_j_csc_svideo = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x014c,
+	.ru = 0x0788, .gu = 0x0581, .bu = 0x0322, .au = 0x0f00,
+	.rv = 0x0399, .gv = 0x0356, .bv = 0x070a, .av = 0x0f00,
+};
+
+static const struct video_levels ntsc_j_levels_svideo = {
+	.blank = 266, .black = 266, .burst = 133,
+};
+
+static const struct color_conversion pal_csc_composite = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0113,
+	.ru = 0x0745, .gu = 0x053f, .bu = 0x05e1, .au = 0x0f00,
+	.rv = 0x0353, .gv = 0x031c, .bv = 0x06dc, .av = 0x0f00,
+};
+
+static const struct video_levels pal_levels_composite = {
+	.blank = 237, .black = 237, .burst = 118,
+};
+
+static const struct color_conversion pal_csc_svideo = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0145,
+	.ru = 0x0780, .gu = 0x0579, .bu = 0x031c, .au = 0x0f00,
+	.rv = 0x0390, .gv = 0x034f, .bv = 0x0705, .av = 0x0f00,
+};
+
+static const struct video_levels pal_levels_svideo = {
+	.blank = 280, .black = 280, .burst = 139,
+};
+
+static const struct color_conversion pal_m_csc_composite = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104,
+	.ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0f00,
+	.rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0f00,
+};
+
+static const struct video_levels pal_m_levels_composite = {
+	.blank = 225, .black = 267, .burst = 113,
+};
+
+static const struct color_conversion pal_m_csc_svideo = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0134,
+	.ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0f00,
+	.rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0f00,
+};
+
+static const struct video_levels pal_m_levels_svideo = {
+	.blank = 266, .black = 316, .burst = 133,
+};
+
+static const struct color_conversion pal_n_csc_composite = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104,
+	.ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0f00,
+	.rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0f00,
+};
+
+static const struct video_levels pal_n_levels_composite = {
+	.blank = 225, .black = 267, .burst = 118,
+};
+
+static const struct color_conversion pal_n_csc_svideo = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0134,
+	.ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0f00,
+	.rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0f00,
+};
+
+static const struct video_levels pal_n_levels_svideo = {
+	.blank = 266, .black = 316, .burst = 139,
+};
+
+/*
+ * Component connections
+ */
+static const struct color_conversion sdtv_csc_yprpb = {
+	.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0146,
+	.ru = 0x0559, .gu = 0x0353, .bu = 0x0100, .au = 0x0f00,
+	.rv = 0x0100, .gv = 0x03ad, .bv = 0x074d, .av = 0x0f00,
+};
+
+static const struct color_conversion sdtv_csc_rgb = {
+	.ry = 0x0000, .gy = 0x0f00, .by = 0x0000, .ay = 0x0166,
+	.ru = 0x0000, .gu = 0x0000, .bu = 0x0f00, .au = 0x0166,
+	.rv = 0x0f00, .gv = 0x0000, .bv = 0x0000, .av = 0x0166,
+};
+
+static const struct color_conversion hdtv_csc_yprpb = {
+	.ry = 0x05b3, .gy = 0x016e, .by = 0x0728, .ay = 0x0146,
+	.ru = 0x07d5, .gu = 0x038b, .bu = 0x0100, .au = 0x0f00,
+	.rv = 0x0100, .gv = 0x03d1, .bv = 0x06bc, .av = 0x0f00,
+};
+
+static const struct color_conversion hdtv_csc_rgb = {
+	.ry = 0x0000, .gy = 0x0f00, .by = 0x0000, .ay = 0x0166,
+	.ru = 0x0000, .gu = 0x0000, .bu = 0x0f00, .au = 0x0166,
+	.rv = 0x0f00, .gv = 0x0000, .bv = 0x0000, .av = 0x0166,
+};
+
+static const struct video_levels component_levels = {
+	.blank = 279, .black = 279, .burst = 0,
+};
+
+
+struct tv_mode {
+	char *name;
+	int clock;
+	int refresh; /* in millihertz (for precision) */
+	u32 oversample;
+	int hsync_end, hblank_start, hblank_end, htotal;
+	bool progressive, trilevel_sync, component_only;
+	int vsync_start_f1, vsync_start_f2, vsync_len;
+	bool veq_ena;
+	int veq_start_f1, veq_start_f2, veq_len;
+	int vi_end_f1, vi_end_f2, nbr_end;
+	bool burst_ena;
+	int hburst_start, hburst_len;
+	int vburst_start_f1, vburst_end_f1;
+	int vburst_start_f2, vburst_end_f2;
+	int vburst_start_f3, vburst_end_f3;
+	int vburst_start_f4, vburst_end_f4;
+	/*
+	 * subcarrier programming
+	 */
+	int dda2_size, dda3_size, dda1_inc, dda2_inc, dda3_inc;
+	u32 sc_reset;
+	bool pal_burst;
+	/*
+	 * blank/black levels
+	 */
+	const struct video_levels *composite_levels, *svideo_levels;
+	const struct color_conversion *composite_color, *svideo_color;
+	const u32 *filter_table;
+	int max_srcw;
+};
+
+
+/*
+ * Sub carrier DDA
+ *
+ *  I think this works as follows:
+ *
+ *  subcarrier freq = pixel_clock * (dda1_inc + dda2_inc / dda2_size) / 4096
+ *
+ * Presumably, when dda3 is added in, it gets to adjust the dda2_inc value
+ *
+ * So,
+ *  dda1_ideal = subcarrier/pixel * 4096
+ *  dda1_inc = floor (dda1_ideal)
+ *  dda2 = dda1_ideal - dda1_inc
+ *
+ *  then pick a ratio for dda2 that gives the closest approximation. If
+ *  you can't get close enough, you can play with dda3 as well. This
+ *  seems likely to happen when dda2 is small as the jumps would be larger
+ *
+ * To invert this,
+ *
+ *  pixel_clock = subcarrier * 4096 / (dda1_inc + dda2_inc / dda2_size)
+ *
+ * The constants below were all computed using a 107.520MHz clock
+ */
+
+/**
+ * Register programming values for TV modes.
+ *
+ * These values account for -1s required.
+ */
+
+const static struct tv_mode tv_modes[] = {
+	{
+		.name		= "NTSC-M",
+		.clock		= 107520,
+		.refresh	= 29970,
+		.oversample	= TV_OVERSAMPLE_8X,
+		.component_only = 0,
+		/* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */
+
+		.hsync_end	= 64,		    .hblank_end		= 124,
+		.hblank_start	= 836,		    .htotal		= 857,
+
+		.progressive	= false,	    .trilevel_sync = false,
+
+		.vsync_start_f1	= 6,		    .vsync_start_f2	= 7,
+		.vsync_len	= 6,
+
+		.veq_ena	= true,		    .veq_start_f1    	= 0,
+		.veq_start_f2	= 1,		    .veq_len		= 18,
+
+		.vi_end_f1	= 20,		    .vi_end_f2		= 21,
+		.nbr_end	= 240,
+
+		.burst_ena	= true,
+		.hburst_start	= 72,		    .hburst_len		= 34,
+		.vburst_start_f1 = 9,		    .vburst_end_f1	= 240,
+		.vburst_start_f2 = 10,		    .vburst_end_f2	= 240,
+		.vburst_start_f3 = 9,		    .vburst_end_f3	= 240,
+		.vburst_start_f4 = 10,		    .vburst_end_f4	= 240,
+
+		/* desired 3.5800000 actual 3.5800000 clock 107.52 */
+		.dda1_inc	=    136,
+		.dda2_inc	=   7624,	    .dda2_size		=  20013,
+		.dda3_inc	=      0,	    .dda3_size		=      0,
+		.sc_reset	= TV_SC_RESET_EVERY_4,
+		.pal_burst	= false,
+
+		.composite_levels = &ntsc_m_levels_composite,
+		.composite_color = &ntsc_m_csc_composite,
+		.svideo_levels  = &ntsc_m_levels_svideo,
+		.svideo_color = &ntsc_m_csc_svideo,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name		= "NTSC-443",
+		.clock		= 107520,
+		.refresh	= 29970,
+		.oversample	= TV_OVERSAMPLE_8X,
+		.component_only = 0,
+		/* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 4.43MHz */
+		.hsync_end	= 64,		    .hblank_end		= 124,
+		.hblank_start	= 836,		    .htotal		= 857,
+
+		.progressive	= false,	    .trilevel_sync = false,
+
+		.vsync_start_f1 = 6,		    .vsync_start_f2	= 7,
+		.vsync_len	= 6,
+
+		.veq_ena	= true,		    .veq_start_f1    	= 0,
+		.veq_start_f2	= 1,		    .veq_len		= 18,
+
+		.vi_end_f1	= 20,		    .vi_end_f2		= 21,
+		.nbr_end	= 240,
+
+		.burst_ena	= 8,
+		.hburst_start	= 72,		    .hburst_len		= 34,
+		.vburst_start_f1 = 9,		    .vburst_end_f1	= 240,
+		.vburst_start_f2 = 10,		    .vburst_end_f2	= 240,
+		.vburst_start_f3 = 9,		    .vburst_end_f3	= 240,
+		.vburst_start_f4 = 10,		    .vburst_end_f4	= 240,
+
+		/* desired 4.4336180 actual 4.4336180 clock 107.52 */
+		.dda1_inc       =    168,
+		.dda2_inc       =  18557,       .dda2_size      =  20625,
+		.dda3_inc       =      0,       .dda3_size      =      0,
+		.sc_reset   = TV_SC_RESET_EVERY_8,
+		.pal_burst  = true,
+
+		.composite_levels = &ntsc_m_levels_composite,
+		.composite_color = &ntsc_m_csc_composite,
+		.svideo_levels  = &ntsc_m_levels_svideo,
+		.svideo_color = &ntsc_m_csc_svideo,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name		= "NTSC-J",
+		.clock		= 107520,
+		.refresh	= 29970,
+		.oversample	= TV_OVERSAMPLE_8X,
+		.component_only = 0,
+
+		/* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */
+		.hsync_end	= 64,		    .hblank_end		= 124,
+		.hblank_start = 836,	    .htotal		= 857,
+
+		.progressive	= false,    .trilevel_sync = false,
+
+		.vsync_start_f1	= 6,	    .vsync_start_f2	= 7,
+		.vsync_len	= 6,
+
+		.veq_ena	= true,		    .veq_start_f1    	= 0,
+		.veq_start_f2 = 1,	    .veq_len		= 18,
+
+		.vi_end_f1	= 20,		    .vi_end_f2		= 21,
+		.nbr_end	= 240,
+
+		.burst_ena	= true,
+		.hburst_start	= 72,		    .hburst_len		= 34,
+		.vburst_start_f1 = 9,		    .vburst_end_f1	= 240,
+		.vburst_start_f2 = 10,		    .vburst_end_f2	= 240,
+		.vburst_start_f3 = 9,		    .vburst_end_f3	= 240,
+		.vburst_start_f4 = 10,		    .vburst_end_f4	= 240,
+
+		/* desired 3.5800000 actual 3.5800000 clock 107.52 */
+		.dda1_inc	=    136,
+		.dda2_inc	=   7624,	    .dda2_size		=  20013,
+		.dda3_inc	=      0,	    .dda3_size		=      0,
+		.sc_reset	= TV_SC_RESET_EVERY_4,
+		.pal_burst	= false,
+
+		.composite_levels = &ntsc_j_levels_composite,
+		.composite_color = &ntsc_j_csc_composite,
+		.svideo_levels  = &ntsc_j_levels_svideo,
+		.svideo_color = &ntsc_j_csc_svideo,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name		= "PAL-M",
+		.clock		= 107520,
+		.refresh	= 29970,
+		.oversample	= TV_OVERSAMPLE_8X,
+		.component_only = 0,
+
+		/* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */
+		.hsync_end	= 64,		  .hblank_end		= 124,
+		.hblank_start = 836,	  .htotal		= 857,
+
+		.progressive	= false,	    .trilevel_sync = false,
+
+		.vsync_start_f1	= 6,		    .vsync_start_f2	= 7,
+		.vsync_len	= 6,
+
+		.veq_ena	= true,		    .veq_start_f1    	= 0,
+		.veq_start_f2	= 1,		    .veq_len		= 18,
+
+		.vi_end_f1	= 20,		    .vi_end_f2		= 21,
+		.nbr_end	= 240,
+
+		.burst_ena	= true,
+		.hburst_start	= 72,		    .hburst_len		= 34,
+		.vburst_start_f1 = 9,		    .vburst_end_f1	= 240,
+		.vburst_start_f2 = 10,		    .vburst_end_f2	= 240,
+		.vburst_start_f3 = 9,		    .vburst_end_f3	= 240,
+		.vburst_start_f4 = 10,		    .vburst_end_f4	= 240,
+
+		/* desired 3.5800000 actual 3.5800000 clock 107.52 */
+		.dda1_inc	=    136,
+		.dda2_inc	=    7624,	    .dda2_size		=  20013,
+		.dda3_inc	=      0,	    .dda3_size		=      0,
+		.sc_reset	= TV_SC_RESET_EVERY_4,
+		.pal_burst  = false,
+
+		.composite_levels = &pal_m_levels_composite,
+		.composite_color = &pal_m_csc_composite,
+		.svideo_levels  = &pal_m_levels_svideo,
+		.svideo_color = &pal_m_csc_svideo,
+
+		.filter_table = filter_table,
+	},
+	{
+		/* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */
+		.name	    = "PAL-N",
+		.clock		= 107520,
+		.refresh	= 25000,
+		.oversample	= TV_OVERSAMPLE_8X,
+		.component_only = 0,
+
+		.hsync_end	= 64,		    .hblank_end		= 128,
+		.hblank_start = 844,	    .htotal		= 863,
+
+		.progressive  = false,    .trilevel_sync = false,
+
+
+		.vsync_start_f1	= 6,	   .vsync_start_f2	= 7,
+		.vsync_len	= 6,
+
+		.veq_ena	= true,		    .veq_start_f1    	= 0,
+		.veq_start_f2	= 1,		    .veq_len		= 18,
+
+		.vi_end_f1	= 24,		    .vi_end_f2		= 25,
+		.nbr_end	= 286,
+
+		.burst_ena	= true,
+		.hburst_start = 73,	    	    .hburst_len		= 34,
+		.vburst_start_f1 = 8,	    .vburst_end_f1	= 285,
+		.vburst_start_f2 = 8,	    .vburst_end_f2	= 286,
+		.vburst_start_f3 = 9,	    .vburst_end_f3	= 286,
+		.vburst_start_f4 = 9,	    .vburst_end_f4	= 285,
+
+
+		/* desired 4.4336180 actual 4.4336180 clock 107.52 */
+		.dda1_inc       =    168,
+		.dda2_inc       =  18557,       .dda2_size      =  20625,
+		.dda3_inc       =      0,       .dda3_size      =      0,
+		.sc_reset   = TV_SC_RESET_EVERY_8,
+		.pal_burst  = true,
+
+		.composite_levels = &pal_n_levels_composite,
+		.composite_color = &pal_n_csc_composite,
+		.svideo_levels  = &pal_n_levels_svideo,
+		.svideo_color = &pal_n_csc_svideo,
+
+		.filter_table = filter_table,
+	},
+	{
+		/* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */
+		.name	    = "PAL",
+		.clock		= 107520,
+		.refresh	= 25000,
+		.oversample	= TV_OVERSAMPLE_8X,
+		.component_only = 0,
+
+		.hsync_end	= 64,		    .hblank_end		= 128,
+		.hblank_start	= 844,	    .htotal		= 863,
+
+		.progressive	= false,    .trilevel_sync = false,
+
+		.vsync_start_f1	= 5,	    .vsync_start_f2	= 6,
+		.vsync_len	= 5,
+
+		.veq_ena	= true,		    .veq_start_f1    	= 0,
+		.veq_start_f2	= 1,	    .veq_len		= 15,
+
+		.vi_end_f1	= 24,		    .vi_end_f2		= 25,
+		.nbr_end	= 286,
+
+		.burst_ena	= true,
+		.hburst_start	= 73,		    .hburst_len		= 32,
+		.vburst_start_f1 = 8,		    .vburst_end_f1	= 285,
+		.vburst_start_f2 = 8,		    .vburst_end_f2	= 286,
+		.vburst_start_f3 = 9,		    .vburst_end_f3	= 286,
+		.vburst_start_f4 = 9,		    .vburst_end_f4	= 285,
+
+		/* desired 4.4336180 actual 4.4336180 clock 107.52 */
+		.dda1_inc       =    168,
+		.dda2_inc       =  18557,       .dda2_size      =  20625,
+		.dda3_inc       =      0,       .dda3_size      =      0,
+		.sc_reset   = TV_SC_RESET_EVERY_8,
+		.pal_burst  = true,
+
+		.composite_levels = &pal_levels_composite,
+		.composite_color = &pal_csc_composite,
+		.svideo_levels  = &pal_levels_svideo,
+		.svideo_color = &pal_csc_svideo,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "480p@59.94Hz",
+		.clock 	= 107520,
+		.refresh	= 59940,
+		.oversample     = TV_OVERSAMPLE_4X,
+		.component_only = 1,
+
+		.hsync_end      = 64,               .hblank_end         = 122,
+		.hblank_start   = 842,              .htotal             = 857,
+
+		.progressive    = true,.trilevel_sync = false,
+
+		.vsync_start_f1 = 12,               .vsync_start_f2     = 12,
+		.vsync_len      = 12,
+
+		.veq_ena        = false,
+
+		.vi_end_f1      = 44,               .vi_end_f2          = 44,
+		.nbr_end        = 496,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "480p@60Hz",
+		.clock 	= 107520,
+		.refresh	= 60000,
+		.oversample     = TV_OVERSAMPLE_4X,
+		.component_only = 1,
+
+		.hsync_end      = 64,               .hblank_end         = 122,
+		.hblank_start   = 842,              .htotal             = 856,
+
+		.progressive    = true,.trilevel_sync = false,
+
+		.vsync_start_f1 = 12,               .vsync_start_f2     = 12,
+		.vsync_len      = 12,
+
+		.veq_ena        = false,
+
+		.vi_end_f1      = 44,               .vi_end_f2          = 44,
+		.nbr_end        = 496,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "576p",
+		.clock 	= 107520,
+		.refresh	= 50000,
+		.oversample     = TV_OVERSAMPLE_4X,
+		.component_only = 1,
+
+		.hsync_end      = 64,               .hblank_end         = 139,
+		.hblank_start   = 859,              .htotal             = 863,
+
+		.progressive    = true,		.trilevel_sync = false,
+
+		.vsync_start_f1 = 10,               .vsync_start_f2     = 10,
+		.vsync_len      = 10,
+
+		.veq_ena        = false,
+
+		.vi_end_f1      = 48,               .vi_end_f2          = 48,
+		.nbr_end        = 575,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "720p@60Hz",
+		.clock		= 148800,
+		.refresh	= 60000,
+		.oversample     = TV_OVERSAMPLE_2X,
+		.component_only = 1,
+
+		.hsync_end      = 80,               .hblank_end         = 300,
+		.hblank_start   = 1580,             .htotal             = 1649,
+
+		.progressive    = true, 	    .trilevel_sync = true,
+
+		.vsync_start_f1 = 10,               .vsync_start_f2     = 10,
+		.vsync_len      = 10,
+
+		.veq_ena        = false,
+
+		.vi_end_f1      = 29,               .vi_end_f2          = 29,
+		.nbr_end        = 719,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "720p@59.94Hz",
+		.clock		= 148800,
+		.refresh	= 59940,
+		.oversample     = TV_OVERSAMPLE_2X,
+		.component_only = 1,
+
+		.hsync_end      = 80,               .hblank_end         = 300,
+		.hblank_start   = 1580,             .htotal             = 1651,
+
+		.progressive    = true, 	    .trilevel_sync = true,
+
+		.vsync_start_f1 = 10,               .vsync_start_f2     = 10,
+		.vsync_len      = 10,
+
+		.veq_ena        = false,
+
+		.vi_end_f1      = 29,               .vi_end_f2          = 29,
+		.nbr_end        = 719,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "720p@50Hz",
+		.clock		= 148800,
+		.refresh	= 50000,
+		.oversample     = TV_OVERSAMPLE_2X,
+		.component_only = 1,
+
+		.hsync_end      = 80,               .hblank_end         = 300,
+		.hblank_start   = 1580,             .htotal             = 1979,
+
+		.progressive    = true, 	        .trilevel_sync = true,
+
+		.vsync_start_f1 = 10,               .vsync_start_f2     = 10,
+		.vsync_len      = 10,
+
+		.veq_ena        = false,
+
+		.vi_end_f1      = 29,               .vi_end_f2          = 29,
+		.nbr_end        = 719,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+		.max_srcw = 800
+	},
+	{
+		.name       = "1080i@50Hz",
+		.clock		= 148800,
+		.refresh	= 25000,
+		.oversample     = TV_OVERSAMPLE_2X,
+		.component_only = 1,
+
+		.hsync_end      = 88,               .hblank_end         = 235,
+		.hblank_start   = 2155,             .htotal             = 2639,
+
+		.progressive    = false, 	    .trilevel_sync = true,
+
+		.vsync_start_f1 = 4,              .vsync_start_f2     = 5,
+		.vsync_len      = 10,
+
+		.veq_ena	= true,		    .veq_start_f1    	= 4,
+		.veq_start_f2   = 4,	    .veq_len		= 10,
+
+
+		.vi_end_f1      = 21,           .vi_end_f2          = 22,
+		.nbr_end        = 539,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "1080i@60Hz",
+		.clock		= 148800,
+		.refresh	= 30000,
+		.oversample     = TV_OVERSAMPLE_2X,
+		.component_only = 1,
+
+		.hsync_end      = 88,               .hblank_end         = 235,
+		.hblank_start   = 2155,             .htotal             = 2199,
+
+		.progressive    = false, 	    .trilevel_sync = true,
+
+		.vsync_start_f1 = 4,               .vsync_start_f2     = 5,
+		.vsync_len      = 10,
+
+		.veq_ena	= true,		    .veq_start_f1    	= 4,
+		.veq_start_f2	= 4,		    .veq_len		= 10,
+
+
+		.vi_end_f1      = 21,               .vi_end_f2          = 22,
+		.nbr_end        = 539,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "1080i@59.94Hz",
+		.clock		= 148800,
+		.refresh	= 29970,
+		.oversample     = TV_OVERSAMPLE_2X,
+		.component_only = 1,
+
+		.hsync_end      = 88,               .hblank_end         = 235,
+		.hblank_start   = 2155,             .htotal             = 2200,
+
+		.progressive    = false, 	    .trilevel_sync = true,
+
+		.vsync_start_f1 = 4,            .vsync_start_f2    = 5,
+		.vsync_len      = 10,
+
+		.veq_ena	= true,		    .veq_start_f1	= 4,
+		.veq_start_f2 = 4,	    	    .veq_len = 10,
+
+
+		.vi_end_f1      = 21,           .vi_end_f2         	= 22,
+		.nbr_end        = 539,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+};
+
+#define NUM_TV_MODES sizeof(tv_modes) / sizeof (tv_modes[0])
+
+static void
+intel_tv_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	switch(mode) {
+	case DRM_MODE_DPMS_ON:
+		I915_WRITE(TV_CTL, I915_READ(TV_CTL) | TV_ENC_ENABLE);
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+	case DRM_MODE_DPMS_OFF:
+		I915_WRITE(TV_CTL, I915_READ(TV_CTL) & ~TV_ENC_ENABLE);
+		break;
+	}
+}
+
+static void
+intel_tv_save(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_tv_priv *tv_priv = intel_output->dev_priv;
+	int i;
+
+	tv_priv->save_TV_H_CTL_1 = I915_READ(TV_H_CTL_1);
+	tv_priv->save_TV_H_CTL_2 = I915_READ(TV_H_CTL_2);
+	tv_priv->save_TV_H_CTL_3 = I915_READ(TV_H_CTL_3);
+	tv_priv->save_TV_V_CTL_1 = I915_READ(TV_V_CTL_1);
+	tv_priv->save_TV_V_CTL_2 = I915_READ(TV_V_CTL_2);
+	tv_priv->save_TV_V_CTL_3 = I915_READ(TV_V_CTL_3);
+	tv_priv->save_TV_V_CTL_4 = I915_READ(TV_V_CTL_4);
+	tv_priv->save_TV_V_CTL_5 = I915_READ(TV_V_CTL_5);
+	tv_priv->save_TV_V_CTL_6 = I915_READ(TV_V_CTL_6);
+	tv_priv->save_TV_V_CTL_7 = I915_READ(TV_V_CTL_7);
+	tv_priv->save_TV_SC_CTL_1 = I915_READ(TV_SC_CTL_1);
+	tv_priv->save_TV_SC_CTL_2 = I915_READ(TV_SC_CTL_2);
+	tv_priv->save_TV_SC_CTL_3 = I915_READ(TV_SC_CTL_3);
+
+	tv_priv->save_TV_CSC_Y = I915_READ(TV_CSC_Y);
+	tv_priv->save_TV_CSC_Y2 = I915_READ(TV_CSC_Y2);
+	tv_priv->save_TV_CSC_U = I915_READ(TV_CSC_U);
+	tv_priv->save_TV_CSC_U2 = I915_READ(TV_CSC_U2);
+	tv_priv->save_TV_CSC_V = I915_READ(TV_CSC_V);
+	tv_priv->save_TV_CSC_V2 = I915_READ(TV_CSC_V2);
+	tv_priv->save_TV_CLR_KNOBS = I915_READ(TV_CLR_KNOBS);
+	tv_priv->save_TV_CLR_LEVEL = I915_READ(TV_CLR_LEVEL);
+	tv_priv->save_TV_WIN_POS = I915_READ(TV_WIN_POS);
+	tv_priv->save_TV_WIN_SIZE = I915_READ(TV_WIN_SIZE);
+	tv_priv->save_TV_FILTER_CTL_1 = I915_READ(TV_FILTER_CTL_1);
+	tv_priv->save_TV_FILTER_CTL_2 = I915_READ(TV_FILTER_CTL_2);
+	tv_priv->save_TV_FILTER_CTL_3 = I915_READ(TV_FILTER_CTL_3);
+
+	for (i = 0; i < 60; i++)
+		tv_priv->save_TV_H_LUMA[i] = I915_READ(TV_H_LUMA_0 + (i <<2));
+	for (i = 0; i < 60; i++)
+		tv_priv->save_TV_H_CHROMA[i] = I915_READ(TV_H_CHROMA_0 + (i <<2));
+	for (i = 0; i < 43; i++)
+		tv_priv->save_TV_V_LUMA[i] = I915_READ(TV_V_LUMA_0 + (i <<2));
+	for (i = 0; i < 43; i++)
+		tv_priv->save_TV_V_CHROMA[i] = I915_READ(TV_V_CHROMA_0 + (i <<2));
+
+	tv_priv->save_TV_DAC = I915_READ(TV_DAC);
+	tv_priv->save_TV_CTL = I915_READ(TV_CTL);
+}
+
+static void
+intel_tv_restore(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_tv_priv *tv_priv = intel_output->dev_priv;
+	struct drm_crtc *crtc = connector->encoder->crtc;
+	struct intel_crtc *intel_crtc;
+	int i;
+
+	/* FIXME: No CRTC? */
+	if (!crtc)
+		return;
+
+	intel_crtc = to_intel_crtc(crtc);
+	I915_WRITE(TV_H_CTL_1, tv_priv->save_TV_H_CTL_1);
+	I915_WRITE(TV_H_CTL_2, tv_priv->save_TV_H_CTL_2);
+	I915_WRITE(TV_H_CTL_3, tv_priv->save_TV_H_CTL_3);
+	I915_WRITE(TV_V_CTL_1, tv_priv->save_TV_V_CTL_1);
+	I915_WRITE(TV_V_CTL_2, tv_priv->save_TV_V_CTL_2);
+	I915_WRITE(TV_V_CTL_3, tv_priv->save_TV_V_CTL_3);
+	I915_WRITE(TV_V_CTL_4, tv_priv->save_TV_V_CTL_4);
+	I915_WRITE(TV_V_CTL_5, tv_priv->save_TV_V_CTL_5);
+	I915_WRITE(TV_V_CTL_6, tv_priv->save_TV_V_CTL_6);
+	I915_WRITE(TV_V_CTL_7, tv_priv->save_TV_V_CTL_7);
+	I915_WRITE(TV_SC_CTL_1, tv_priv->save_TV_SC_CTL_1);
+	I915_WRITE(TV_SC_CTL_2, tv_priv->save_TV_SC_CTL_2);
+	I915_WRITE(TV_SC_CTL_3, tv_priv->save_TV_SC_CTL_3);
+
+	I915_WRITE(TV_CSC_Y, tv_priv->save_TV_CSC_Y);
+	I915_WRITE(TV_CSC_Y2, tv_priv->save_TV_CSC_Y2);
+	I915_WRITE(TV_CSC_U, tv_priv->save_TV_CSC_U);
+	I915_WRITE(TV_CSC_U2, tv_priv->save_TV_CSC_U2);
+	I915_WRITE(TV_CSC_V, tv_priv->save_TV_CSC_V);
+	I915_WRITE(TV_CSC_V2, tv_priv->save_TV_CSC_V2);
+	I915_WRITE(TV_CLR_KNOBS, tv_priv->save_TV_CLR_KNOBS);
+	I915_WRITE(TV_CLR_LEVEL, tv_priv->save_TV_CLR_LEVEL);
+
+	{
+		int pipeconf_reg = (intel_crtc->pipe == 0) ?
+			PIPEACONF : PIPEBCONF;
+		int dspcntr_reg = (intel_crtc->plane == 0) ?
+			DSPACNTR : DSPBCNTR;
+		int pipeconf = I915_READ(pipeconf_reg);
+		int dspcntr = I915_READ(dspcntr_reg);
+		int dspbase_reg = (intel_crtc->plane == 0) ?
+			DSPAADDR : DSPBADDR;
+		/* Pipe must be off here */
+		I915_WRITE(dspcntr_reg, dspcntr & ~DISPLAY_PLANE_ENABLE);
+		/* Flush the plane changes */
+		I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+
+		if (!IS_I9XX(dev)) {
+			/* Wait for vblank for the disable to take effect */
+			intel_wait_for_vblank(dev);
+		}
+
+		I915_WRITE(pipeconf_reg, pipeconf & ~PIPEACONF_ENABLE);
+		/* Wait for vblank for the disable to take effect. */
+		intel_wait_for_vblank(dev);
+
+		/* Filter ctl must be set before TV_WIN_SIZE */
+		I915_WRITE(TV_FILTER_CTL_1, tv_priv->save_TV_FILTER_CTL_1);
+		I915_WRITE(TV_FILTER_CTL_2, tv_priv->save_TV_FILTER_CTL_2);
+		I915_WRITE(TV_FILTER_CTL_3, tv_priv->save_TV_FILTER_CTL_3);
+		I915_WRITE(TV_WIN_POS, tv_priv->save_TV_WIN_POS);
+		I915_WRITE(TV_WIN_SIZE, tv_priv->save_TV_WIN_SIZE);
+		I915_WRITE(pipeconf_reg, pipeconf);
+		I915_WRITE(dspcntr_reg, dspcntr);
+		/* Flush the plane changes */
+		I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+	}
+
+	for (i = 0; i < 60; i++)
+		I915_WRITE(TV_H_LUMA_0 + (i <<2), tv_priv->save_TV_H_LUMA[i]);
+	for (i = 0; i < 60; i++)
+		I915_WRITE(TV_H_CHROMA_0 + (i <<2), tv_priv->save_TV_H_CHROMA[i]);
+	for (i = 0; i < 43; i++)
+		I915_WRITE(TV_V_LUMA_0 + (i <<2), tv_priv->save_TV_V_LUMA[i]);
+	for (i = 0; i < 43; i++)
+		I915_WRITE(TV_V_CHROMA_0 + (i <<2), tv_priv->save_TV_V_CHROMA[i]);
+
+	I915_WRITE(TV_DAC, tv_priv->save_TV_DAC);
+	I915_WRITE(TV_CTL, tv_priv->save_TV_CTL);
+}
+
+static const struct tv_mode *
+intel_tv_mode_lookup (char *tv_format)
+{
+	int i;
+
+	for (i = 0; i < sizeof(tv_modes) / sizeof (tv_modes[0]); i++) {
+		const struct tv_mode *tv_mode = &tv_modes[i];
+
+		if (!strcmp(tv_format, tv_mode->name))
+			return tv_mode;
+	}
+	return NULL;
+}
+
+static const struct tv_mode *
+intel_tv_mode_find (struct intel_output *intel_output)
+{
+	struct intel_tv_priv *tv_priv = intel_output->dev_priv;
+
+	return intel_tv_mode_lookup(tv_priv->tv_format);
+}
+
+static enum drm_mode_status
+intel_tv_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+	const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output);
+
+	/* Ensure TV refresh is close to desired refresh */
+	if (tv_mode && abs(tv_mode->refresh - drm_mode_vrefresh(mode)) < 1)
+		return MODE_OK;
+	return MODE_CLOCK_RANGE;
+}
+
+
+static bool
+intel_tv_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
+		    struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_mode_config *drm_config = &dev->mode_config;
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	const struct tv_mode *tv_mode = intel_tv_mode_find (intel_output);
+	struct drm_encoder *other_encoder;
+
+	if (!tv_mode)
+		return false;
+
+	/* FIXME: lock encoder list */
+	list_for_each_entry(other_encoder, &drm_config->encoder_list, head) {
+		if (other_encoder != encoder &&
+		    other_encoder->crtc == encoder->crtc)
+			return false;
+	}
+
+	adjusted_mode->clock = tv_mode->clock;
+	return true;
+}
+
+static void
+intel_tv_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
+		  struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_output *intel_output = enc_to_intel_output(encoder);
+	struct intel_tv_priv *tv_priv = intel_output->dev_priv;
+	const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output);
+	u32 tv_ctl;
+	u32 hctl1, hctl2, hctl3;
+	u32 vctl1, vctl2, vctl3, vctl4, vctl5, vctl6, vctl7;
+	u32 scctl1, scctl2, scctl3;
+	int i, j;
+	const struct video_levels *video_levels;
+	const struct color_conversion *color_conversion;
+	bool burst_ena;
+
+	if (!tv_mode)
+		return;	/* can't happen (mode_prepare prevents this) */
+
+	tv_ctl = 0;
+
+	switch (tv_priv->type) {
+	default:
+	case DRM_MODE_CONNECTOR_Unknown:
+	case DRM_MODE_CONNECTOR_Composite:
+		tv_ctl |= TV_ENC_OUTPUT_COMPOSITE;
+		video_levels = tv_mode->composite_levels;
+		color_conversion = tv_mode->composite_color;
+		burst_ena = tv_mode->burst_ena;
+		break;
+	case DRM_MODE_CONNECTOR_Component:
+		tv_ctl |= TV_ENC_OUTPUT_COMPONENT;
+		video_levels = &component_levels;
+		if (tv_mode->burst_ena)
+			color_conversion = &sdtv_csc_yprpb;
+		else
+			color_conversion = &hdtv_csc_yprpb;
+		burst_ena = false;
+		break;
+	case DRM_MODE_CONNECTOR_SVIDEO:
+		tv_ctl |= TV_ENC_OUTPUT_SVIDEO;
+		video_levels = tv_mode->svideo_levels;
+		color_conversion = tv_mode->svideo_color;
+		burst_ena = tv_mode->burst_ena;
+		break;
+	}
+	hctl1 = (tv_mode->hsync_end << TV_HSYNC_END_SHIFT) |
+		(tv_mode->htotal << TV_HTOTAL_SHIFT);
+
+	hctl2 = (tv_mode->hburst_start << 16) |
+		(tv_mode->hburst_len << TV_HBURST_LEN_SHIFT);
+
+	if (burst_ena)
+		hctl2 |= TV_BURST_ENA;
+
+	hctl3 = (tv_mode->hblank_start << TV_HBLANK_START_SHIFT) |
+		(tv_mode->hblank_end << TV_HBLANK_END_SHIFT);
+
+	vctl1 = (tv_mode->nbr_end << TV_NBR_END_SHIFT) |
+		(tv_mode->vi_end_f1 << TV_VI_END_F1_SHIFT) |
+		(tv_mode->vi_end_f2 << TV_VI_END_F2_SHIFT);
+
+	vctl2 = (tv_mode->vsync_len << TV_VSYNC_LEN_SHIFT) |
+		(tv_mode->vsync_start_f1 << TV_VSYNC_START_F1_SHIFT) |
+		(tv_mode->vsync_start_f2 << TV_VSYNC_START_F2_SHIFT);
+
+	vctl3 = (tv_mode->veq_len << TV_VEQ_LEN_SHIFT) |
+		(tv_mode->veq_start_f1 << TV_VEQ_START_F1_SHIFT) |
+		(tv_mode->veq_start_f2 << TV_VEQ_START_F2_SHIFT);
+
+	if (tv_mode->veq_ena)
+		vctl3 |= TV_EQUAL_ENA;
+
+	vctl4 = (tv_mode->vburst_start_f1 << TV_VBURST_START_F1_SHIFT) |
+		(tv_mode->vburst_end_f1 << TV_VBURST_END_F1_SHIFT);
+
+	vctl5 = (tv_mode->vburst_start_f2 << TV_VBURST_START_F2_SHIFT) |
+		(tv_mode->vburst_end_f2 << TV_VBURST_END_F2_SHIFT);
+
+	vctl6 = (tv_mode->vburst_start_f3 << TV_VBURST_START_F3_SHIFT) |
+		(tv_mode->vburst_end_f3 << TV_VBURST_END_F3_SHIFT);
+
+	vctl7 = (tv_mode->vburst_start_f4 << TV_VBURST_START_F4_SHIFT) |
+		(tv_mode->vburst_end_f4 << TV_VBURST_END_F4_SHIFT);
+
+	if (intel_crtc->pipe == 1)
+		tv_ctl |= TV_ENC_PIPEB_SELECT;
+	tv_ctl |= tv_mode->oversample;
+
+	if (tv_mode->progressive)
+		tv_ctl |= TV_PROGRESSIVE;
+	if (tv_mode->trilevel_sync)
+		tv_ctl |= TV_TRILEVEL_SYNC;
+	if (tv_mode->pal_burst)
+		tv_ctl |= TV_PAL_BURST;
+	scctl1 = 0;
+	/* dda1 implies valid video levels */
+	if (tv_mode->dda1_inc) {
+		scctl1 |= TV_SC_DDA1_EN;
+		scctl1 |= video_levels->burst << TV_BURST_LEVEL_SHIFT;
+	}
+
+	if (tv_mode->dda2_inc)
+		scctl1 |= TV_SC_DDA2_EN;
+
+	if (tv_mode->dda3_inc)
+		scctl1 |= TV_SC_DDA3_EN;
+
+	scctl1 |= tv_mode->sc_reset;
+	scctl1 |= tv_mode->dda1_inc << TV_SCDDA1_INC_SHIFT;
+
+	scctl2 = tv_mode->dda2_size << TV_SCDDA2_SIZE_SHIFT |
+		tv_mode->dda2_inc << TV_SCDDA2_INC_SHIFT;
+
+	scctl3 = tv_mode->dda3_size << TV_SCDDA3_SIZE_SHIFT |
+		tv_mode->dda3_inc << TV_SCDDA3_INC_SHIFT;
+
+	/* Enable two fixes for the chips that need them. */
+	if (dev->pci_device < 0x2772)
+		tv_ctl |= TV_ENC_C0_FIX | TV_ENC_SDP_FIX;
+
+	I915_WRITE(TV_H_CTL_1, hctl1);
+	I915_WRITE(TV_H_CTL_2, hctl2);
+	I915_WRITE(TV_H_CTL_3, hctl3);
+	I915_WRITE(TV_V_CTL_1, vctl1);
+	I915_WRITE(TV_V_CTL_2, vctl2);
+	I915_WRITE(TV_V_CTL_3, vctl3);
+	I915_WRITE(TV_V_CTL_4, vctl4);
+	I915_WRITE(TV_V_CTL_5, vctl5);
+	I915_WRITE(TV_V_CTL_6, vctl6);
+	I915_WRITE(TV_V_CTL_7, vctl7);
+	I915_WRITE(TV_SC_CTL_1, scctl1);
+	I915_WRITE(TV_SC_CTL_2, scctl2);
+	I915_WRITE(TV_SC_CTL_3, scctl3);
+
+	if (color_conversion) {
+		I915_WRITE(TV_CSC_Y, (color_conversion->ry << 16) |
+			   color_conversion->gy);
+		I915_WRITE(TV_CSC_Y2,(color_conversion->by << 16) |
+			   color_conversion->ay);
+		I915_WRITE(TV_CSC_U, (color_conversion->ru << 16) |
+			   color_conversion->gu);
+		I915_WRITE(TV_CSC_U2, (color_conversion->bu << 16) |
+			   color_conversion->au);
+		I915_WRITE(TV_CSC_V, (color_conversion->rv << 16) |
+			   color_conversion->gv);
+		I915_WRITE(TV_CSC_V2, (color_conversion->bv << 16) |
+			   color_conversion->av);
+	}
+
+	I915_WRITE(TV_CLR_KNOBS, 0x00606000);
+	if (video_levels)
+		I915_WRITE(TV_CLR_LEVEL,
+			   ((video_levels->black << TV_BLACK_LEVEL_SHIFT) |
+			    (video_levels->blank << TV_BLANK_LEVEL_SHIFT)));
+	{
+		int pipeconf_reg = (intel_crtc->pipe == 0) ?
+			PIPEACONF : PIPEBCONF;
+		int dspcntr_reg = (intel_crtc->plane == 0) ?
+			DSPACNTR : DSPBCNTR;
+		int pipeconf = I915_READ(pipeconf_reg);
+		int dspcntr = I915_READ(dspcntr_reg);
+		int dspbase_reg = (intel_crtc->plane == 0) ?
+			DSPAADDR : DSPBADDR;
+		int xpos = 0x0, ypos = 0x0;
+		unsigned int xsize, ysize;
+		/* Pipe must be off here */
+		I915_WRITE(dspcntr_reg, dspcntr & ~DISPLAY_PLANE_ENABLE);
+		/* Flush the plane changes */
+		I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+
+		/* Wait for vblank for the disable to take effect */
+		if (!IS_I9XX(dev))
+			intel_wait_for_vblank(dev);
+
+		I915_WRITE(pipeconf_reg, pipeconf & ~PIPEACONF_ENABLE);
+		/* Wait for vblank for the disable to take effect. */
+		intel_wait_for_vblank(dev);
+
+		/* Filter ctl must be set before TV_WIN_SIZE */
+		I915_WRITE(TV_FILTER_CTL_1, TV_AUTO_SCALE);
+		xsize = tv_mode->hblank_start - tv_mode->hblank_end;
+		if (tv_mode->progressive)
+			ysize = tv_mode->nbr_end + 1;
+		else
+			ysize = 2*tv_mode->nbr_end + 1;
+
+		xpos += tv_priv->margin[TV_MARGIN_LEFT];
+		ypos += tv_priv->margin[TV_MARGIN_TOP];
+		xsize -= (tv_priv->margin[TV_MARGIN_LEFT] +
+			  tv_priv->margin[TV_MARGIN_RIGHT]);
+		ysize -= (tv_priv->margin[TV_MARGIN_TOP] +
+			  tv_priv->margin[TV_MARGIN_BOTTOM]);
+		I915_WRITE(TV_WIN_POS, (xpos<<16)|ypos);
+		I915_WRITE(TV_WIN_SIZE, (xsize<<16)|ysize);
+
+		I915_WRITE(pipeconf_reg, pipeconf);
+		I915_WRITE(dspcntr_reg, dspcntr);
+		/* Flush the plane changes */
+		I915_WRITE(dspbase_reg, I915_READ(dspbase_reg));
+	}
+
+	j = 0;
+	for (i = 0; i < 60; i++)
+		I915_WRITE(TV_H_LUMA_0 + (i<<2), tv_mode->filter_table[j++]);
+	for (i = 0; i < 60; i++)
+		I915_WRITE(TV_H_CHROMA_0 + (i<<2), tv_mode->filter_table[j++]);
+	for (i = 0; i < 43; i++)
+		I915_WRITE(TV_V_LUMA_0 + (i<<2), tv_mode->filter_table[j++]);
+	for (i = 0; i < 43; i++)
+		I915_WRITE(TV_V_CHROMA_0 + (i<<2), tv_mode->filter_table[j++]);
+	I915_WRITE(TV_DAC, 0);
+	I915_WRITE(TV_CTL, tv_ctl);
+}
+
+static const struct drm_display_mode reported_modes[] = {
+	{
+		.name = "NTSC 480i",
+		.clock = 107520,
+		.hdisplay = 1280,
+		.hsync_start = 1368,
+		.hsync_end = 1496,
+		.htotal = 1712,
+
+		.vdisplay = 1024,
+		.vsync_start = 1027,
+		.vsync_end = 1034,
+		.vtotal = 1104,
+		.type = DRM_MODE_TYPE_DRIVER,
+	},
+};
+
+/**
+ * Detects TV presence by checking for load.
+ *
+ * Requires that the current pipe's DPLL is active.
+
+ * \return true if TV is connected.
+ * \return false if TV is disconnected.
+ */
+static int
+intel_tv_detect_type (struct drm_crtc *crtc, struct intel_output *intel_output)
+{
+	struct drm_encoder *encoder = &intel_output->enc;
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned long irqflags;
+	u32 tv_ctl, save_tv_ctl;
+	u32 tv_dac, save_tv_dac;
+	int type = DRM_MODE_CONNECTOR_Unknown;
+
+	tv_dac = I915_READ(TV_DAC);
+
+	/* Disable TV interrupts around load detect or we'll recurse */
+	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
+	i915_disable_pipestat(dev_priv, 0, PIPE_HOTPLUG_INTERRUPT_ENABLE |
+			      PIPE_HOTPLUG_TV_INTERRUPT_ENABLE);
+	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
+
+	/*
+	 * Detect TV by polling)
+	 */
+	if (intel_output->load_detect_temp) {
+		/* TV not currently running, prod it with destructive detect */
+		save_tv_dac = tv_dac;
+		tv_ctl = I915_READ(TV_CTL);
+		save_tv_ctl = tv_ctl;
+		tv_ctl &= ~TV_ENC_ENABLE;
+		tv_ctl &= ~TV_TEST_MODE_MASK;
+		tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
+		tv_dac &= ~TVDAC_SENSE_MASK;
+		tv_dac |= (TVDAC_STATE_CHG_EN |
+			   TVDAC_A_SENSE_CTL |
+			   TVDAC_B_SENSE_CTL |
+			   TVDAC_C_SENSE_CTL |
+			   DAC_CTL_OVERRIDE |
+			   DAC_A_0_7_V |
+			   DAC_B_0_7_V |
+			   DAC_C_0_7_V);
+		I915_WRITE(TV_CTL, tv_ctl);
+		I915_WRITE(TV_DAC, tv_dac);
+		intel_wait_for_vblank(dev);
+		tv_dac = I915_READ(TV_DAC);
+		I915_WRITE(TV_DAC, save_tv_dac);
+		I915_WRITE(TV_CTL, save_tv_ctl);
+	}
+	/*
+	 *  A B C
+	 *  0 1 1 Composite
+	 *  1 0 X svideo
+	 *  0 0 0 Component
+	 */
+	if ((tv_dac & TVDAC_SENSE_MASK) == (TVDAC_B_SENSE | TVDAC_C_SENSE)) {
+		DRM_DEBUG("Detected Composite TV connection\n");
+		type = DRM_MODE_CONNECTOR_Composite;
+	} else if ((tv_dac & (TVDAC_A_SENSE|TVDAC_B_SENSE)) == TVDAC_A_SENSE) {
+		DRM_DEBUG("Detected S-Video TV connection\n");
+		type = DRM_MODE_CONNECTOR_SVIDEO;
+	} else if ((tv_dac & TVDAC_SENSE_MASK) == 0) {
+		DRM_DEBUG("Detected Component TV connection\n");
+		type = DRM_MODE_CONNECTOR_Component;
+	} else {
+		DRM_DEBUG("No TV connection detected\n");
+		type = -1;
+	}
+
+	/* Restore interrupt config */
+	spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
+	i915_enable_pipestat(dev_priv, 0, PIPE_HOTPLUG_INTERRUPT_ENABLE |
+			     PIPE_HOTPLUG_TV_INTERRUPT_ENABLE);
+	spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
+
+	return type;
+}
+
+/**
+ * Detect the TV connection.
+ *
+ * Currently this always returns CONNECTOR_STATUS_UNKNOWN, as we need to be sure
+ * we have a pipe programmed in order to probe the TV.
+ */
+static enum drm_connector_status
+intel_tv_detect(struct drm_connector *connector)
+{
+	struct drm_crtc *crtc;
+	struct drm_display_mode mode;
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_tv_priv *tv_priv = intel_output->dev_priv;
+	struct drm_encoder *encoder = &intel_output->enc;
+	int dpms_mode;
+	int type = tv_priv->type;
+
+	mode = reported_modes[0];
+	drm_mode_set_crtcinfo(&mode, CRTC_INTERLACE_HALVE_V);
+
+	if (encoder->crtc) {
+		type = intel_tv_detect_type(encoder->crtc, intel_output);
+	} else {
+		crtc = intel_get_load_detect_pipe(intel_output, &mode, &dpms_mode);
+		if (crtc) {
+			type = intel_tv_detect_type(crtc, intel_output);
+			intel_release_load_detect_pipe(intel_output, dpms_mode);
+		} else
+			type = -1;
+	}
+
+	if (type < 0)
+		return connector_status_disconnected;
+
+	return connector_status_connected;
+}
+
+static struct input_res {
+	char *name;
+	int w, h;
+} input_res_table[] =
+{
+	{"640x480", 640, 480},
+	{"800x600", 800, 600},
+	{"1024x768", 1024, 768},
+	{"1280x1024", 1280, 1024},
+	{"848x480", 848, 480},
+	{"1280x720", 1280, 720},
+	{"1920x1080", 1920, 1080},
+};
+
+/**
+ * Stub get_modes function.
+ *
+ * This should probably return a set of fixed modes, unless we can figure out
+ * how to probe modes off of TV connections.
+ */
+
+static int
+intel_tv_get_modes(struct drm_connector *connector)
+{
+	struct drm_display_mode *mode_ptr;
+	struct intel_output *intel_output = to_intel_output(connector);
+	const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output);
+	int j;
+
+	for (j = 0; j < sizeof(input_res_table) / sizeof(input_res_table[0]);
+	     j++) {
+		struct input_res *input = &input_res_table[j];
+		unsigned int hactive_s = input->w;
+		unsigned int vactive_s = input->h;
+
+		if (tv_mode->max_srcw && input->w > tv_mode->max_srcw)
+			continue;
+
+		if (input->w > 1024 && (!tv_mode->progressive
+					&& !tv_mode->component_only))
+			continue;
+
+		mode_ptr = drm_calloc(1, sizeof(struct drm_display_mode),
+				      DRM_MEM_DRIVER);
+		strncpy(mode_ptr->name, input->name, DRM_DISPLAY_MODE_LEN);
+
+		mode_ptr->hdisplay = hactive_s;
+		mode_ptr->hsync_start = hactive_s + 1;
+		mode_ptr->hsync_end = hactive_s + 64;
+		if (mode_ptr->hsync_end <= mode_ptr->hsync_start)
+			mode_ptr->hsync_end = mode_ptr->hsync_start + 1;
+		mode_ptr->htotal = hactive_s + 96;
+
+		mode_ptr->vdisplay = vactive_s;
+		mode_ptr->vsync_start = vactive_s + 1;
+		mode_ptr->vsync_end = vactive_s + 32;
+		if (mode_ptr->vsync_end <= mode_ptr->vsync_start)
+			mode_ptr->vsync_end = mode_ptr->vsync_start  + 1;
+		mode_ptr->vtotal = vactive_s + 33;
+
+		mode_ptr->clock = (int) (tv_mode->refresh *
+					 mode_ptr->vtotal *
+					 mode_ptr->htotal / 1000) / 1000;
+
+		mode_ptr->type = DRM_MODE_TYPE_DRIVER;
+		drm_mode_probed_add(connector, mode_ptr);
+	}
+
+	return 0;
+}
+
+static void
+intel_tv_destroy (struct drm_connector *connector)
+{
+	struct intel_output *intel_output = to_intel_output(connector);
+
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	drm_free(intel_output, sizeof(struct intel_output) + sizeof(struct intel_tv_priv),
+		 DRM_MEM_DRIVER);
+}
+
+
+static int
+intel_tv_set_property(struct drm_connector *connector, struct drm_property *property,
+		      uint64_t val)
+{
+	struct drm_device *dev = connector->dev;
+	struct intel_output *intel_output = to_intel_output(connector);
+	struct intel_tv_priv *tv_priv = intel_output->dev_priv;
+	int ret = 0;
+
+	ret = drm_connector_property_set_value(connector, property, val);
+	if (ret < 0)
+		goto out;
+
+	if (property == dev->mode_config.tv_left_margin_property)
+		tv_priv->margin[TV_MARGIN_LEFT] = val;
+	else if (property == dev->mode_config.tv_right_margin_property)
+		tv_priv->margin[TV_MARGIN_RIGHT] = val;
+	else if (property == dev->mode_config.tv_top_margin_property)
+		tv_priv->margin[TV_MARGIN_TOP] = val;
+	else if (property == dev->mode_config.tv_bottom_margin_property)
+		tv_priv->margin[TV_MARGIN_BOTTOM] = val;
+	else if (property == dev->mode_config.tv_mode_property) {
+		if (val >= NUM_TV_MODES) {
+			ret = -EINVAL;
+			goto out;
+		}
+		tv_priv->tv_format = tv_modes[val].name;
+		intel_tv_mode_set(&intel_output->enc, NULL, NULL);
+	} else {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	intel_tv_mode_set(&intel_output->enc, NULL, NULL);
+out:
+	return ret;
+}
+
+static const struct drm_encoder_helper_funcs intel_tv_helper_funcs = {
+	.dpms = intel_tv_dpms,
+	.mode_fixup = intel_tv_mode_fixup,
+	.prepare = intel_encoder_prepare,
+	.mode_set = intel_tv_mode_set,
+	.commit = intel_encoder_commit,
+};
+
+static const struct drm_connector_funcs intel_tv_connector_funcs = {
+	.save = intel_tv_save,
+	.restore = intel_tv_restore,
+	.detect = intel_tv_detect,
+	.destroy = intel_tv_destroy,
+	.set_property = intel_tv_set_property,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+};
+
+static const struct drm_connector_helper_funcs intel_tv_connector_helper_funcs = {
+	.mode_valid = intel_tv_mode_valid,
+	.get_modes = intel_tv_get_modes,
+	.best_encoder = intel_best_encoder,
+};
+
+void intel_tv_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs intel_tv_enc_funcs = {
+	.destroy = intel_tv_enc_destroy,
+};
+
+
+void
+intel_tv_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_connector *connector;
+	struct intel_output *intel_output;
+	struct intel_tv_priv *tv_priv;
+	u32 tv_dac_on, tv_dac_off, save_tv_dac;
+	char **tv_format_names;
+	int i, initial_mode = 0;
+
+	if ((I915_READ(TV_CTL) & TV_FUSE_STATE_MASK) == TV_FUSE_STATE_DISABLED)
+		return;
+
+	/* Even if we have an encoder we may not have a connector */
+	if (!dev_priv->int_tv_support)
+		return;
+
+	/*
+	 * Sanity check the TV output by checking to see if the
+	 * DAC register holds a value
+	 */
+	save_tv_dac = I915_READ(TV_DAC);
+
+	I915_WRITE(TV_DAC, save_tv_dac | TVDAC_STATE_CHG_EN);
+	tv_dac_on = I915_READ(TV_DAC);
+
+	I915_WRITE(TV_DAC, save_tv_dac & ~TVDAC_STATE_CHG_EN);
+	tv_dac_off = I915_READ(TV_DAC);
+
+	I915_WRITE(TV_DAC, save_tv_dac);
+
+	/*
+	 * If the register does not hold the state change enable
+	 * bit, (either as a 0 or a 1), assume it doesn't really
+	 * exist
+	 */
+	if ((tv_dac_on & TVDAC_STATE_CHG_EN) == 0 ||
+	    (tv_dac_off & TVDAC_STATE_CHG_EN) != 0)
+		return;
+
+	intel_output = drm_calloc(1, sizeof(struct intel_output) +
+				  sizeof(struct intel_tv_priv), DRM_MEM_DRIVER);
+	if (!intel_output) {
+		return;
+	}
+	connector = &intel_output->base;
+
+	drm_connector_init(dev, connector, &intel_tv_connector_funcs,
+			   DRM_MODE_CONNECTOR_SVIDEO);
+
+	drm_encoder_init(dev, &intel_output->enc, &intel_tv_enc_funcs,
+			 DRM_MODE_ENCODER_TVDAC);
+
+	drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
+	tv_priv = (struct intel_tv_priv *)(intel_output + 1);
+	intel_output->type = INTEL_OUTPUT_TVOUT;
+	intel_output->enc.possible_crtcs = ((1 << 0) | (1 << 1));
+	intel_output->enc.possible_clones = (1 << INTEL_OUTPUT_TVOUT);
+	intel_output->dev_priv = tv_priv;
+	tv_priv->type = DRM_MODE_CONNECTOR_Unknown;
+
+	/* BIOS margin values */
+	tv_priv->margin[TV_MARGIN_LEFT] = 54;
+	tv_priv->margin[TV_MARGIN_TOP] = 36;
+	tv_priv->margin[TV_MARGIN_RIGHT] = 46;
+	tv_priv->margin[TV_MARGIN_BOTTOM] = 37;
+
+	tv_priv->tv_format = kstrdup(tv_modes[initial_mode].name, GFP_KERNEL);
+
+	drm_encoder_helper_add(&intel_output->enc, &intel_tv_helper_funcs);
+	drm_connector_helper_add(connector, &intel_tv_connector_helper_funcs);
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	/* Create TV properties then attach current values */
+	tv_format_names = drm_alloc(sizeof(char *) * NUM_TV_MODES,
+				    DRM_MEM_DRIVER);
+	if (!tv_format_names)
+		goto out;
+	for (i = 0; i < NUM_TV_MODES; i++)
+		tv_format_names[i] = tv_modes[i].name;
+	drm_mode_create_tv_properties(dev, NUM_TV_MODES, tv_format_names);
+
+	drm_connector_attach_property(connector, dev->mode_config.tv_mode_property,
+				   initial_mode);
+	drm_connector_attach_property(connector,
+				   dev->mode_config.tv_left_margin_property,
+				   tv_priv->margin[TV_MARGIN_LEFT]);
+	drm_connector_attach_property(connector,
+				   dev->mode_config.tv_top_margin_property,
+				   tv_priv->margin[TV_MARGIN_TOP]);
+	drm_connector_attach_property(connector,
+				   dev->mode_config.tv_right_margin_property,
+				   tv_priv->margin[TV_MARGIN_RIGHT]);
+	drm_connector_attach_property(connector,
+				   dev->mode_config.tv_bottom_margin_property,
+				   tv_priv->margin[TV_MARGIN_BOTTOM]);
+out:
+	drm_sysfs_connector_add(connector);
+}