Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus

48 files changed, 1450 insertions, 117 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 410ffe4e9d8..368879ff5d8 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -143,6 +143,16 @@ config SENSORS_ADT7470
 	  This driver can also be built as a module. If so, the module
 	  will be called adt7470.
 
+config SENSORS_ADT7473
+	tristate "Analog Devices ADT7473"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Analog Devices
+	  ADT7473 temperature monitoring chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called adt7473.
+
 config SENSORS_K8TEMP
 	tristate "AMD Athlon64/FX or Opteron temperature sensor"
 	depends on X86 && PCI && EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 824161337f1..3bdb05a5cbd 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_SENSORS_ADM1031)	+= adm1031.o
 obj-$(CONFIG_SENSORS_ADM9240)	+= adm9240.o
 obj-$(CONFIG_SENSORS_ADS7828)	+= ads7828.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
+obj-$(CONFIG_SENSORS_ADT7473)	+= adt7473.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
 obj-$(CONFIG_SENSORS_AMS)	+= ams/
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
diff --git a/drivers/hwmon/ad7418.c b/drivers/hwmon/ad7418.c
index fcd7fe78f3f..466b9ee9279 100644
--- a/drivers/hwmon/ad7418.c
+++ b/drivers/hwmon/ad7418.c
@@ -26,7 +26,7 @@
 #define DRV_VERSION "0.3"
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x28, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x28, I2C_CLIENT_END };
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_3(ad7416, ad7417, ad7418);
 
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index b96be772e49..ecbf69484bf 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -31,10 +31,8 @@
 
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
-					0x29, 0x2a, 0x2b,
-					0x4c, 0x4d, 0x4e,
-					I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = {
+	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm,
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index e96c3725203..1d76de7d75c 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -62,7 +62,7 @@
  * NE1619 has two possible addresses: 0x2c and 0x2d.
  */
 
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
 /*
  * Insmod parameters
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 8002f68240c..904c6ce9d83 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -35,7 +35,7 @@
 #include <linux/mutex.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(adm1026);
@@ -1624,6 +1624,7 @@ static struct attribute *adm1026_attributes_temp3[] = {
 	&dev_attr_temp3_crit_enable.attr,
 	&dev_attr_temp3_auto_point1_pwm.attr,
 	&dev_attr_temp3_auto_point2_pwm.attr,
+	NULL
 };
 
 static const struct attribute_group adm1026_group_temp3 = {
@@ -1639,6 +1640,7 @@ static struct attribute *adm1026_attributes_in8_9[] = {
 	&sensor_dev_attr_in9_max.dev_attr.attr,
 	&sensor_dev_attr_in9_min.dev_attr.attr,
 	&sensor_dev_attr_in9_alarm.dev_attr.attr,
+	NULL
 };
 
 static const struct attribute_group adm1026_group_in8_9 = {
diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c
index 0bc897dffa2..2c6608d453c 100644
--- a/drivers/hwmon/adm1029.c
+++ b/drivers/hwmon/adm1029.c
@@ -39,10 +39,8 @@
  * Addresses to scan
  */
 
-static unsigned short normal_i2c[] = {
-	0x28, 0x29, 0x2a,
-	0x2b, 0x2c, 0x2d,
-	0x2e, 0x2f, I2C_CLIENT_END
+static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
+						0x2e, 0x2f, I2C_CLIENT_END
 };
 
 /*
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 5aaad3636c9..2bffcab7dc9 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -61,7 +61,7 @@
 #define ADM1031_CONF2_TEMP_ENABLE(chan)	(0x10 << (chan))
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_2(adm1030, adm1031);
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 7671d2bf780..149ef25252e 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -52,7 +52,7 @@
 #include <linux/mutex.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
 					I2C_CLIENT_END };
 
 /* Insmod parameters */
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index 6b8a73ef404..ed71a8bc70d 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -44,7 +44,7 @@
 #define ADS7828_INT_VREF_MV 2500 /* Internal vref is 2.5V, 2500mV */
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
 	I2C_CLIENT_END };
 
 /* Insmod parameters */
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 747693ab2ff..6b5325f33a2 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -30,7 +30,7 @@
 #include <linux/log2.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(adt7470);
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
new file mode 100644
index 00000000000..9587869bdba
--- /dev/null
+++ b/drivers/hwmon/adt7473.c
@@ -0,0 +1,1157 @@
+/*
+ * A hwmon driver for the Analog Devices ADT7473
+ * Copyright (C) 2007 IBM
+ *
+ * Author: Darrick J. Wong <djwong@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/log2.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x2C, 0x2D, 0x2E, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(adt7473);
+
+/* ADT7473 registers */
+#define ADT7473_REG_BASE_ADDR			0x20
+
+#define ADT7473_REG_VOLT_BASE_ADDR		0x21
+#define ADT7473_REG_VOLT_MAX_ADDR		0x22
+#define ADT7473_REG_VOLT_MIN_BASE_ADDR		0x46
+#define ADT7473_REG_VOLT_MIN_MAX_ADDR		0x49
+
+#define ADT7473_REG_TEMP_BASE_ADDR		0x25
+#define ADT7473_REG_TEMP_MAX_ADDR		0x27
+#define ADT7473_REG_TEMP_LIMITS_BASE_ADDR	0x4E
+#define ADT7473_REG_TEMP_LIMITS_MAX_ADDR	0x53
+#define ADT7473_REG_TEMP_TMIN_BASE_ADDR		0x67
+#define ADT7473_REG_TEMP_TMIN_MAX_ADDR		0x69
+#define ADT7473_REG_TEMP_TMAX_BASE_ADDR		0x6A
+#define ADT7473_REG_TEMP_TMAX_MAX_ADDR		0x6C
+
+#define ADT7473_REG_FAN_BASE_ADDR		0x28
+#define ADT7473_REG_FAN_MAX_ADDR		0x2F
+#define ADT7473_REG_FAN_MIN_BASE_ADDR		0x54
+#define ADT7473_REG_FAN_MIN_MAX_ADDR		0x5B
+
+#define ADT7473_REG_PWM_BASE_ADDR		0x30
+#define ADT7473_REG_PWM_MAX_ADDR		0x32
+#define	ADT7473_REG_PWM_MIN_BASE_ADDR		0x64
+#define ADT7473_REG_PWM_MIN_MAX_ADDR		0x66
+#define ADT7473_REG_PWM_MAX_BASE_ADDR		0x38
+#define ADT7473_REG_PWM_MAX_MAX_ADDR		0x3A
+#define ADT7473_REG_PWM_BHVR_BASE_ADDR		0x5C
+#define ADT7473_REG_PWM_BHVR_MAX_ADDR		0x5E
+#define		ADT7473_PWM_BHVR_MASK		0xE0
+#define		ADT7473_PWM_BHVR_SHIFT		5
+
+#define ADT7473_REG_CFG1			0x40
+#define 	ADT7473_CFG1_START		0x01
+#define		ADT7473_CFG1_READY		0x04
+#define ADT7473_REG_CFG2			0x73
+#define ADT7473_REG_CFG3			0x78
+#define ADT7473_REG_CFG4			0x7D
+#define		ADT7473_CFG4_MAX_DUTY_AT_OVT	0x08
+#define ADT7473_REG_CFG5			0x7C
+#define		ADT7473_CFG5_TEMP_TWOS		0x01
+#define		ADT7473_CFG5_TEMP_OFFSET	0x02
+
+#define ADT7473_REG_DEVICE			0x3D
+#define 	ADT7473_VENDOR			0x41
+#define ADT7473_REG_VENDOR			0x3E
+#define 	ADT7473_DEVICE			0x73
+#define ADT7473_REG_REVISION			0x3F
+#define 	ADT7473_REV_68			0x68
+#define 	ADT7473_REV_69			0x69
+
+#define ADT7473_REG_ALARM1			0x41
+#define		ADT7473_VCCP_ALARM		0x02
+#define		ADT7473_VCC_ALARM		0x04
+#define		ADT7473_R1T_ALARM		0x10
+#define		ADT7473_LT_ALARM		0x20
+#define		ADT7473_R2T_ALARM		0x40
+#define		ADT7473_OOL			0x80
+#define ADT7473_REG_ALARM2			0x42
+#define		ADT7473_OVT_ALARM		0x02
+#define		ADT7473_FAN1_ALARM		0x04
+#define		ADT7473_FAN2_ALARM		0x08
+#define		ADT7473_FAN3_ALARM		0x10
+#define		ADT7473_FAN4_ALARM		0x20
+#define		ADT7473_R1T_SHORT		0x40
+#define		ADT7473_R2T_SHORT		0x80
+#define ADT7473_REG_MAX_ADDR			0x80
+
+#define ALARM2(x)	((x) << 8)
+
+#define ADT7473_VOLT_COUNT	2
+#define ADT7473_REG_VOLT(x)	(ADT7473_REG_VOLT_BASE_ADDR + (x))
+#define ADT7473_REG_VOLT_MIN(x)	(ADT7473_REG_VOLT_MIN_BASE_ADDR + ((x) * 2))
+#define ADT7473_REG_VOLT_MAX(x)	(ADT7473_REG_VOLT_MIN_BASE_ADDR + \
+				((x) * 2) + 1)
+
+#define ADT7473_TEMP_COUNT	3
+#define ADT7473_REG_TEMP(x)	(ADT7473_REG_TEMP_BASE_ADDR + (x))
+#define ADT7473_REG_TEMP_MIN(x) (ADT7473_REG_TEMP_LIMITS_BASE_ADDR + ((x) * 2))
+#define ADT7473_REG_TEMP_MAX(x) (ADT7473_REG_TEMP_LIMITS_BASE_ADDR + \
+				((x) * 2) + 1)
+#define ADT7473_REG_TEMP_TMIN(x)	(ADT7473_REG_TEMP_TMIN_BASE_ADDR + (x))
+#define ADT7473_REG_TEMP_TMAX(x)	(ADT7473_REG_TEMP_TMAX_BASE_ADDR + (x))
+
+#define ADT7473_FAN_COUNT	4
+#define ADT7473_REG_FAN(x)	(ADT7473_REG_FAN_BASE_ADDR + ((x) * 2))
+#define ADT7473_REG_FAN_MIN(x)	(ADT7473_REG_FAN_MIN_BASE_ADDR + ((x) * 2))
+
+#define ADT7473_PWM_COUNT	3
+#define ADT7473_REG_PWM(x)	(ADT7473_REG_PWM_BASE_ADDR + (x))
+#define ADT7473_REG_PWM_MAX(x)	(ADT7473_REG_PWM_MAX_BASE_ADDR + (x))
+#define ADT7473_REG_PWM_MIN(x)	(ADT7473_REG_PWM_MIN_BASE_ADDR + (x))
+#define ADT7473_REG_PWM_BHVR(x)	(ADT7473_REG_PWM_BHVR_BASE_ADDR + (x))
+
+/* How often do we reread sensors values? (In jiffies) */
+#define SENSOR_REFRESH_INTERVAL	(2 * HZ)
+
+/* How often do we reread sensor limit values? (In jiffies) */
+#define LIMIT_REFRESH_INTERVAL	(60 * HZ)
+
+/* datasheet says to divide this number by the fan reading to get fan rpm */
+#define FAN_PERIOD_TO_RPM(x)	((90000 * 60) / (x))
+#define FAN_RPM_TO_PERIOD	FAN_PERIOD_TO_RPM
+#define FAN_PERIOD_INVALID	65535
+#define FAN_DATA_VALID(x)	((x) && (x) != FAN_PERIOD_INVALID)
+
+struct adt7473_data {
+	struct i2c_client	client;
+	struct device		*hwmon_dev;
+	struct attribute_group	attrs;
+	struct mutex		lock;
+	char			sensors_valid;
+	char			limits_valid;
+	unsigned long		sensors_last_updated;	/* In jiffies */
+	unsigned long		limits_last_updated;	/* In jiffies */
+
+	u8			volt[ADT7473_VOLT_COUNT];
+	s8			volt_min[ADT7473_VOLT_COUNT];
+	s8			volt_max[ADT7473_VOLT_COUNT];
+
+	s8			temp[ADT7473_TEMP_COUNT];
+	s8			temp_min[ADT7473_TEMP_COUNT];
+	s8			temp_max[ADT7473_TEMP_COUNT];
+	s8			temp_tmin[ADT7473_TEMP_COUNT];
+	/* This is called the !THERM limit in the datasheet */
+	s8			temp_tmax[ADT7473_TEMP_COUNT];
+
+	u16			fan[ADT7473_FAN_COUNT];
+	u16			fan_min[ADT7473_FAN_COUNT];
+
+	u8			pwm[ADT7473_PWM_COUNT];
+	u8			pwm_max[ADT7473_PWM_COUNT];
+	u8			pwm_min[ADT7473_PWM_COUNT];
+	u8			pwm_behavior[ADT7473_PWM_COUNT];
+
+	u8			temp_twos_complement;
+	u8			temp_offset;
+
+	u16			alarm;
+	u8			max_duty_at_overheat;
+};
+
+static int adt7473_attach_adapter(struct i2c_adapter *adapter);
+static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind);
+static int adt7473_detach_client(struct i2c_client *client);
+
+static struct i2c_driver adt7473_driver = {
+	.driver = {
+		.name	= "adt7473",
+	},
+	.attach_adapter	= adt7473_attach_adapter,
+	.detach_client	= adt7473_detach_client,
+};
+
+/*
+ * 16-bit registers on the ADT7473 are low-byte first.  The data sheet says
+ * that the low byte must be read before the high byte.
+ */
+static inline int adt7473_read_word_data(struct i2c_client *client, u8 reg)
+{
+	u16 foo;
+	foo = i2c_smbus_read_byte_data(client, reg);
+	foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8);
+	return foo;
+}
+
+static inline int adt7473_write_word_data(struct i2c_client *client, u8 reg,
+					  u16 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value & 0xFF)
+	       && i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
+}
+
+static void adt7473_init_client(struct i2c_client *client)
+{
+	int reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG1);
+
+	if (!(reg & ADT7473_CFG1_READY)) {
+		dev_err(&client->dev, "Chip not ready.\n");
+	} else {
+		/* start monitoring */
+		i2c_smbus_write_byte_data(client, ADT7473_REG_CFG1,
+					  reg | ADT7473_CFG1_START);
+	}
+}
+
+static struct adt7473_data *adt7473_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	unsigned long local_jiffies = jiffies;
+	u8 cfg;
+	int i;
+
+	mutex_lock(&data->lock);
+	if (time_before(local_jiffies, data->sensors_last_updated +
+		SENSOR_REFRESH_INTERVAL)
+		&& data->sensors_valid)
+		goto no_sensor_update;
+
+	for (i = 0; i < ADT7473_VOLT_COUNT; i++)
+		data->volt[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_VOLT(i));
+
+	/* Determine temperature encoding */
+	cfg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG5);
+	data->temp_twos_complement = (cfg & ADT7473_CFG5_TEMP_TWOS);
+
+	/*
+	 * What does this do? it implies a variable temperature sensor
+	 * offset, but the datasheet doesn't say anything about this bit
+	 * and other parts of the datasheet imply that "offset64" mode
+	 * means that you shift temp values by -64 if the above bit was set.
+	 */
+	data->temp_offset = (cfg & ADT7473_CFG5_TEMP_OFFSET);
+
+	for (i = 0; i < ADT7473_TEMP_COUNT; i++)
+		data->temp[i] = i2c_smbus_read_byte_data(client,
+							 ADT7473_REG_TEMP(i));
+
+	for (i = 0; i < ADT7473_FAN_COUNT; i++)
+		data->fan[i] = adt7473_read_word_data(client,
+						ADT7473_REG_FAN(i));
+
+	for (i = 0; i < ADT7473_PWM_COUNT; i++)
+		data->pwm[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_PWM(i));
+
+	data->alarm = i2c_smbus_read_byte_data(client, ADT7473_REG_ALARM1);
+	if (data->alarm & ADT7473_OOL)
+		data->alarm |= ALARM2(i2c_smbus_read_byte_data(client,
+							 ADT7473_REG_ALARM2));
+
+	data->sensors_last_updated = local_jiffies;
+	data->sensors_valid = 1;
+
+no_sensor_update:
+	if (time_before(local_jiffies, data->limits_last_updated +
+		LIMIT_REFRESH_INTERVAL)
+		&& data->limits_valid)
+		goto out;
+
+	for (i = 0; i < ADT7473_VOLT_COUNT; i++) {
+		data->volt_min[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_VOLT_MIN(i));
+		data->volt_max[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_VOLT_MAX(i));
+	}
+
+	for (i = 0; i < ADT7473_TEMP_COUNT; i++) {
+		data->temp_min[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_TEMP_MIN(i));
+		data->temp_max[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_TEMP_MAX(i));
+		data->temp_tmin[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_TEMP_TMIN(i));
+		data->temp_tmax[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_TEMP_TMAX(i));
+	}
+
+	for (i = 0; i < ADT7473_FAN_COUNT; i++)
+		data->fan_min[i] = adt7473_read_word_data(client,
+						ADT7473_REG_FAN_MIN(i));
+
+	for (i = 0; i < ADT7473_PWM_COUNT; i++) {
+		data->pwm_max[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_PWM_MAX(i));
+		data->pwm_min[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_PWM_MIN(i));
+		data->pwm_behavior[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_PWM_BHVR(i));
+	}
+
+	data->limits_last_updated = local_jiffies;
+	data->limits_valid = 1;
+
+out:
+	mutex_unlock(&data->lock);
+	return data;
+}
+
+/*
+ * On this chip, voltages are given as a count of steps between a minimum
+ * and maximum voltage, not a direct voltage.
+ */
+static const int volt_convert_table[][2] = {
+	{2997, 3},
+	{4395, 4},
+};
+
+static int decode_volt(int volt_index, u8 raw)
+{
+	int cmax = volt_convert_table[volt_index][0];
+	int cmin = volt_convert_table[volt_index][1];
+	return ((raw * (cmax - cmin)) / 255) + cmin;
+}
+
+static u8 encode_volt(int volt_index, int cooked)
+{
+	int cmax = volt_convert_table[volt_index][0];
+	int cmin = volt_convert_table[volt_index][1];
+	u8 x;
+
+	if (cooked > cmax)
+		cooked = cmax;
+	else if (cooked < cmin)
+		cooked = cmin;
+
+	x = ((cooked - cmin) * 255) / (cmax - cmin);
+
+	return x;
+}
+
+static ssize_t show_volt_min(struct device *dev,
+			     struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       decode_volt(attr->index, data->volt_min[attr->index]));
+}
+
+static ssize_t set_volt_min(struct device *dev,
+			    struct device_attribute *devattr,
+			    const char *buf,
+			    size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10));
+
+	mutex_lock(&data->lock);
+	data->volt_min[attr->index] = volt;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_VOLT_MIN(attr->index),
+				  volt);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_volt_max(struct device *dev,
+			     struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       decode_volt(attr->index, data->volt_max[attr->index]));
+}
+
+static ssize_t set_volt_max(struct device *dev,
+			    struct device_attribute *devattr,
+			    const char *buf,
+			    size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10));
+
+	mutex_lock(&data->lock);
+	data->volt_max[attr->index] = volt;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_VOLT_MAX(attr->index),
+				  volt);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_volt(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+		       decode_volt(attr->index, data->volt[attr->index]));
+}
+
+/*
+ * This chip can report temperature data either as a two's complement
+ * number in the range -128 to 127, or as an unsigned number that must
+ * be offset by 64.
+ */
+static int decode_temp(struct adt7473_data *data, u8 raw)
+{
+	if (data->temp_twos_complement)
+		return (s8)raw;
+	return raw - 64;
+}
+
+static u8 encode_temp(struct adt7473_data *data, int cooked)
+{
+	if (data->temp_twos_complement)
+		return (cooked & 0xFF);
+	return cooked + 64;
+}
+
+static ssize_t show_temp_min(struct device *dev,
+			     struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       1000 * decode_temp(data, data->temp_min[attr->index]));
+}
+
+static ssize_t set_temp_min(struct device *dev,
+			    struct device_attribute *devattr,
+			    const char *buf,
+			    size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10) / 1000;
+	temp = encode_temp(data, temp);
+
+	mutex_lock(&data->lock);
+	data->temp_min[attr->index] = temp;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_MIN(attr->index),
+				  temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_temp_max(struct device *dev,
+			     struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       1000 * decode_temp(data, data->temp_max[attr->index]));
+}
+
+static ssize_t set_temp_max(struct device *dev,
+			    struct device_attribute *devattr,
+			    const char *buf,
+			    size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10) / 1000;
+	temp = encode_temp(data, temp);
+
+	mutex_lock(&data->lock);
+	data->temp_max[attr->index] = temp;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_MAX(attr->index),
+				  temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       1000 * decode_temp(data, data->temp[attr->index]));
+}
+
+static ssize_t show_fan_min(struct device *dev,
+			    struct device_attribute *devattr,
+			    char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+
+	if (FAN_DATA_VALID(data->fan_min[attr->index]))
+		return sprintf(buf, "%d\n",
+			       FAN_PERIOD_TO_RPM(data->fan_min[attr->index]));
+	else
+		return sprintf(buf, "0\n");
+}
+
+static ssize_t set_fan_min(struct device *dev,
+			   struct device_attribute *devattr,
+			   const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10);
+
+	if (!temp)
+		return -EINVAL;
+	temp = FAN_RPM_TO_PERIOD(temp);
+
+	mutex_lock(&data->lock);
+	data->fan_min[attr->index] = temp;
+	adt7473_write_word_data(client, ADT7473_REG_FAN_MIN(attr->index), temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
+			char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+
+	if (FAN_DATA_VALID(data->fan[attr->index]))
+		return sprintf(buf, "%d\n",
+			       FAN_PERIOD_TO_RPM(data->fan[attr->index]));
+	else
+		return sprintf(buf, "0\n");
+}
+
+static ssize_t show_max_duty_at_crit(struct device *dev,
+				     struct device_attribute *devattr,
+				     char *buf)
+{
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n", data->max_duty_at_overheat);
+}
+
+static ssize_t set_max_duty_at_crit(struct device *dev,
+				    struct device_attribute *devattr,
+				    const char *buf,
+				    size_t count)
+{
+	u8 reg;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10);
+	temp = temp && 0xFF;
+
+	mutex_lock(&data->lock);
+	data->max_duty_at_overheat = temp;
+	reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
+	if (temp)
+		reg |= ADT7473_CFG4_MAX_DUTY_AT_OVT;
+	else
+		reg &= ~ADT7473_CFG4_MAX_DUTY_AT_OVT;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_CFG4, reg);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
+			char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n", data->pwm[attr->index]);
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
+			const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10);
+
+	mutex_lock(&data->lock);
+	data->pwm[attr->index] = temp;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM(attr->index), temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_pwm_max(struct device *dev,
+			    struct device_attribute *devattr,
+			    char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n", data->pwm_max[attr->index]);
+}
+
+static ssize_t set_pwm_max(struct device *dev,
+			   struct device_attribute *devattr,
+			   const char *buf,
+			   size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10);
+
+	mutex_lock(&data->lock);
+	data->pwm_max[attr->index] = temp;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_MAX(attr->index),
+				  temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_pwm_min(struct device *dev,
+			    struct device_attribute *devattr,
+			    char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n", data->pwm_min[attr->index]);
+}
+
+static ssize_t set_pwm_min(struct device *dev,
+			   struct device_attribute *devattr,
+			   const char *buf,
+			   size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10);
+
+	mutex_lock(&data->lock);
+	data->pwm_min[attr->index] = temp;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_MIN(attr->index),
+				  temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_temp_tmax(struct device *dev,
+			      struct device_attribute *devattr,
+			      char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       1000 * decode_temp(data, data->temp_tmax[attr->index]));
+}
+
+static ssize_t set_temp_tmax(struct device *dev,
+			     struct device_attribute *devattr,
+			     const char *buf,
+			     size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10) / 1000;
+	temp = encode_temp(data, temp);
+
+	mutex_lock(&data->lock);
+	data->temp_tmax[attr->index] = temp;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_TMAX(attr->index),
+				  temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_temp_tmin(struct device *dev,
+			      struct device_attribute *devattr,
+			      char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       1000 * decode_temp(data, data->temp_tmin[attr->index]));
+}
+
+static ssize_t set_temp_tmin(struct device *dev,
+			     struct device_attribute *devattr,
+			     const char *buf,
+			     size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10) / 1000;
+	temp = encode_temp(data, temp);
+
+	mutex_lock(&data->lock);
+	data->temp_tmin[attr->index] = temp;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_TMIN(attr->index),
+				  temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_pwm_enable(struct device *dev,
+			       struct device_attribute *devattr,
+			       char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+
+	switch (data->pwm_behavior[attr->index] >> ADT7473_PWM_BHVR_SHIFT) {
+	case 3:
+		return sprintf(buf, "0\n");
+	case 7:
+		return sprintf(buf, "1\n");
+	default:
+		return sprintf(buf, "2\n");
+	}
+}
+
+static ssize_t set_pwm_enable(struct device *dev,
+			      struct device_attribute *devattr,
+			      const char *buf,
+			      size_t count)
+{
+	u8 reg;
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10);
+
+	switch (temp) {
+	case 0:
+		temp = 3;
+		break;
+	case 1:
+		temp = 7;
+		break;
+	case 2:
+		/* Enter automatic mode with fans off */
+		temp = 4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->lock);
+	reg = i2c_smbus_read_byte_data(client,
+				       ADT7473_REG_PWM_BHVR(attr->index));
+	reg = (temp << ADT7473_PWM_BHVR_SHIFT) |
+	      (reg & ~ADT7473_PWM_BHVR_MASK);
+	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_BHVR(attr->index),
+				  reg);
+	data->pwm_behavior[attr->index] = reg;
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_pwm_auto_temp(struct device *dev,
+				  struct device_attribute *devattr,
+				  char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	int bhvr = data->pwm_behavior[attr->index] >> ADT7473_PWM_BHVR_SHIFT;
+
+	switch (bhvr) {
+	case 3:
+	case 4:
+	case 7:
+		return sprintf(buf, "0\n");
+	case 0:
+	case 1:
+	case 5:
+	case 6:
+		return sprintf(buf, "%d\n", bhvr + 1);
+	case 2:
+		return sprintf(buf, "4\n");
+	}
+	/* shouldn't ever get here */
+	BUG();
+}
+
+static ssize_t set_pwm_auto_temp(struct device *dev,
+				 struct device_attribute *devattr,
+				 const char *buf,
+				 size_t count)
+{
+	u8 reg;
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10);
+
+	switch (temp) {
+	case 1:
+	case 2:
+	case 6:
+	case 7:
+		temp--;
+		break;
+	case 0:
+		temp = 4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->lock);
+	reg = i2c_smbus_read_byte_data(client,
+				       ADT7473_REG_PWM_BHVR(attr->index));
+	reg = (temp << ADT7473_PWM_BHVR_SHIFT) |
+	      (reg & ~ADT7473_PWM_BHVR_MASK);
+	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_BHVR(attr->index),
+				  reg);
+	data->pwm_behavior[attr->index] = reg;
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_alarm(struct device *dev,
+			  struct device_attribute *devattr,
+			  char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+
+	if (data->alarm & attr->index)
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "0\n");
+}
+
+
+static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max,
+			  set_volt_max, 0);
+static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max,
+			  set_volt_max, 1);
+
+static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min,
+			  set_volt_min, 0);
+static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min,
+			  set_volt_min, 1);
+
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_volt, NULL, 0);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_volt, NULL, 1);
+
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7473_VCCP_ALARM);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7473_VCC_ALARM);
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
+			  set_temp_max, 0);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
+			  set_temp_max, 1);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max,
+			  set_temp_max, 2);
+
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
+			  set_temp_min, 0);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,
+			  set_temp_min, 1);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min,
+			  set_temp_min, 2);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
+
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7473_R1T_ALARM | ALARM2(ADT7473_R1T_SHORT));
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7473_LT_ALARM);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7473_R2T_ALARM | ALARM2(ADT7473_R2T_SHORT));
+
+static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min,
+			  set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min,
+			  set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min,
+			  set_fan_min, 2);
+static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min,
+			  set_fan_min, 3);
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
+
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7473_FAN1_ALARM));
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7473_FAN2_ALARM));
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7473_FAN3_ALARM));
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7473_FAN4_ALARM));
+
+static SENSOR_DEVICE_ATTR(pwm_use_point2_pwm_at_crit, S_IWUSR | S_IRUGO,
+			  show_max_duty_at_crit, set_max_duty_at_crit, 0);
+
+static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO,
+			  show_pwm_min, set_pwm_min, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO,
+			  show_pwm_min, set_pwm_min, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO,
+			  show_pwm_min, set_pwm_min, 2);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO,
+			  show_pwm_max, set_pwm_max, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO,
+			  show_pwm_max, set_pwm_max, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO,
+			  show_pwm_max, set_pwm_max, 2);
+
+static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO,
+			  show_temp_tmin, set_temp_tmin, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO,
+			  show_temp_tmin, set_temp_tmin, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO,
+			  show_temp_tmin, set_temp_tmin, 2);
+
+static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO,
+			  show_temp_tmax, set_temp_tmax, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO,
+			  show_temp_tmax, set_temp_tmax, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO,
+			  show_temp_tmax, set_temp_tmax, 2);
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
+			  set_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
+			  set_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
+			  set_pwm_enable, 2);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO,
+			  show_pwm_auto_temp, set_pwm_auto_temp, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO,
+			  show_pwm_auto_temp, set_pwm_auto_temp, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO,
+			  show_pwm_auto_temp, set_pwm_auto_temp, 2);
+
+static struct attribute *adt7473_attr[] =
+{
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in1_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
+
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan3_min.dev_attr.attr,
+	&sensor_dev_attr_fan4_min.dev_attr.attr,
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_pwm_use_point2_pwm_at_crit.dev_attr.attr,
+
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
+
+	NULL
+};
+
+static int adt7473_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_probe(adapter, &addr_data, adt7473_detect);
+}
+
+static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *client;
+	struct adt7473_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	client = &data->client;
+	client->addr = address;
+	client->adapter = adapter;
+	client->driver = &adt7473_driver;
+
+	i2c_set_clientdata(client, data);
+
+	mutex_init(&data->lock);
+
+	if (kind <= 0) {
+		int vendor, device, revision;
+
+		vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR);
+		if (vendor != ADT7473_VENDOR) {
+			err = -ENODEV;
+			goto exit_free;
+		}
+
+		device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE);
+		if (device != ADT7473_DEVICE) {
+			err = -ENODEV;
+			goto exit_free;
+		}
+
+		revision = i2c_smbus_read_byte_data(client,
+						    ADT7473_REG_REVISION);
+		if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) {
+			err = -ENODEV;
+			goto exit_free;
+		}
+	} else
+		dev_dbg(&adapter->dev, "detection forced\n");
+
+	strlcpy(client->name, "adt7473", I2C_NAME_SIZE);
+
+	err = i2c_attach_client(client);
+	if (err)
+		goto exit_free;
+
+	dev_info(&client->dev, "%s chip found\n", client->name);
+
+	/* Initialize the ADT7473 chip */
+	adt7473_init_client(client);
+
+	/* Register sysfs hooks */
+	data->attrs.attrs = adt7473_attr;
+	err = sysfs_create_group(&client->dev.kobj, &data->attrs);
+	if (err)
+		goto exit_detach;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	return 0;
+
+exit_remove:
+	sysfs_remove_group(&client->dev.kobj, &data->attrs);
+exit_detach:
+	i2c_detach_client(client);
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int adt7473_detach_client(struct i2c_client *client)
+{
+	struct adt7473_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &data->attrs);
+	i2c_detach_client(client);
+	kfree(data);
+	return 0;
+}
+
+static int __init adt7473_init(void)
+{
+	return i2c_add_driver(&adt7473_driver);
+}
+
+static void __exit adt7473_exit(void)
+{
+	i2c_del_driver(&adt7473_driver);
+}
+
+MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_DESCRIPTION("ADT7473 driver");
+MODULE_LICENSE("GPL");
+
+module_init(adt7473_init);
+module_exit(adt7473_exit);
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 0c94770b7f8..aacc0c4b809 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -84,12 +84,15 @@ static const char* temperature_sensors_sets[][36] = {
 /* Set 0: Macbook Pro */
 	{ "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H",
 	  "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL },
-/* Set 1: Macbook set */
+/* Set 1: Macbook2 set */
+	{ "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TN1P", "TTF0", "Th0H",
+	  "Th0S", "Th1H", NULL },
+/* Set 2: Macbook set */
 	{ "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TN1P", "Th0H", "Th0S",
 	  "Th1H", "Ts0P", NULL },
-/* Set 2: Macmini set */
+/* Set 3: Macmini set */
 	{ "TC0D", "TC0P", NULL },
-/* Set 3: Mac Pro (2 x Quad-Core) */
+/* Set 4: Mac Pro (2 x Quad-Core) */
 	{ "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P",
 	  "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "THTG", "TH0P",
 	  "TH1P", "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S",
@@ -1212,12 +1215,14 @@ static void applesmc_release_accelerometer(void)
 static __initdata struct dmi_match_data applesmc_dmi_data[] = {
 /* MacBook Pro: accelerometer, backlight and temperature set 0 */
 	{ .accelerometer = 1, .light = 1, .temperature_set = 0 },
-/* MacBook: accelerometer and temperature set 1 */
+/* MacBook2: accelerometer and temperature set 1 */
 	{ .accelerometer = 1, .light = 0, .temperature_set = 1 },
-/* MacMini: temperature set 2 */
-	{ .accelerometer = 0, .light = 0, .temperature_set = 2 },
-/* MacPro: temperature set 3 */
+/* MacBook: accelerometer and temperature set 2 */
+	{ .accelerometer = 1, .light = 0, .temperature_set = 2 },
+/* MacMini: temperature set 3 */
 	{ .accelerometer = 0, .light = 0, .temperature_set = 3 },
+/* MacPro: temperature set 4 */
+	{ .accelerometer = 0, .light = 0, .temperature_set = 4 },
 };
 
 /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
@@ -1229,16 +1234,20 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
 		(void*)&applesmc_dmi_data[0]},
 	{ applesmc_dmi_match, "Apple MacBook", {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
-	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") },
+	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook2") },
 		(void*)&applesmc_dmi_data[1]},
+	{ applesmc_dmi_match, "Apple MacBook", {
+	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+	  DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") },
+		(void*)&applesmc_dmi_data[2]},
 	{ applesmc_dmi_match, "Apple Macmini", {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"Macmini") },
-		(void*)&applesmc_dmi_data[2]},
+		(void*)&applesmc_dmi_data[3]},
 	{ applesmc_dmi_match, "Apple MacPro2", {
 	  DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
 	  DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
-		(void*)&applesmc_dmi_data[3]},
+		(void*)&applesmc_dmi_data[4]},
 	{ .ident = NULL }
 };
 
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 950cea8d1d6..84712a22ace 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -49,7 +49,7 @@
 #include "lm75.h"
 
 /* I2C addresses to scan */
-static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(asb100);
diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c
index cce3350e539..01c17e387f0 100644
--- a/drivers/hwmon/atxp1.c
+++ b/drivers/hwmon/atxp1.c
@@ -42,7 +42,7 @@ MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
 #define ATXP1_VIDMASK	0x1f
 #define ATXP1_GPIO1MASK	0x0f
 
-static unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END };
 
 I2C_CLIENT_INSMOD_1(atxp1);
 
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 3ee60d26e3a..70239acecc8 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -38,7 +38,8 @@
 
 #define DRVNAME	"coretemp"
 
-typedef enum { SHOW_TEMP, SHOW_TJMAX, SHOW_LABEL, SHOW_NAME } SHOW;
+typedef enum { SHOW_TEMP, SHOW_TJMAX, SHOW_TTARGET, SHOW_LABEL,
+		SHOW_NAME } SHOW;
 
 /*
  * Functions declaration
@@ -55,6 +56,7 @@ struct coretemp_data {
 	unsigned long last_updated;	/* in jiffies */
 	int temp;
 	int tjmax;
+	int ttarget;
 	u8 alarm;
 };
 
@@ -93,9 +95,10 @@ static ssize_t show_temp(struct device *dev,
 
 	if (attr->index == SHOW_TEMP)
 		err = data->valid ? sprintf(buf, "%d\n", data->temp) : -EAGAIN;
-	else
+	else if (attr->index == SHOW_TJMAX)
 		err = sprintf(buf, "%d\n", data->tjmax);
-
+	else
+		err = sprintf(buf, "%d\n", data->ttarget);
 	return err;
 }
 
@@ -103,6 +106,8 @@ static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL,
 			  SHOW_TEMP);
 static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, NULL,
 			  SHOW_TJMAX);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL,
+			  SHOW_TTARGET);
 static DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL);
 static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL);
 static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, SHOW_NAME);
@@ -147,6 +152,56 @@ static struct coretemp_data *coretemp_update_device(struct device *dev)
 	return data;
 }
 
+static int __devinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
+{
+	/* The 100C is default for both mobile and non mobile CPUs */
+
+	int tjmax = 100000;
+	int ismobile = 1;
+	int err;
+	u32 eax, edx;
+
+	/* Early chips have no MSR for TjMax */
+
+	if ((c->x86_model == 0xf) && (c->x86_mask < 4)) {
+		ismobile = 0;
+	}
+
+	if ((c->x86_model > 0xe) && (ismobile)) {
+
+		/* Now we can detect the mobile CPU using Intel provided table
+		   http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
+		   For Core2 cores, check MSR 0x17, bit 28 1 = Mobile CPU
+		*/
+
+		err = rdmsr_safe_on_cpu(id, 0x17, &eax, &edx);
+		if (err) {
+			dev_warn(dev,
+				 "Unable to access MSR 0x17, assuming desktop"
+				 " CPU\n");
+			ismobile = 0;
+		} else if (!(eax & 0x10000000)) {
+			ismobile = 0;
+		}
+	}
+
+	if (ismobile) {
+
+		err = rdmsr_safe_on_cpu(id, 0xee, &eax, &edx);
+		if (err) {
+			dev_warn(dev,
+				 "Unable to access MSR 0xEE, for Tjmax, left"
+				 " at default");
+		} else if (eax & 0x40000000) {
+			tjmax = 85000;
+		}
+	} else {
+		dev_warn(dev, "Using relative temperature scale!\n");
+	}
+
+	return tjmax;
+}
+
 static int __devinit coretemp_probe(struct platform_device *pdev)
 {
 	struct coretemp_data *data;
@@ -163,8 +218,6 @@ static int __devinit coretemp_probe(struct platform_device *pdev)
 	data->id = pdev->id;
 	data->name = "coretemp";
 	mutex_init(&data->update_lock);
-	/* Tjmax default is 100 degrees C */
-	data->tjmax = 100000;
 
 	/* test if we can access the THERM_STATUS MSR */
 	err = rdmsr_safe_on_cpu(data->id, MSR_IA32_THERM_STATUS, &eax, &edx);
@@ -191,40 +244,29 @@ static int __devinit coretemp_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* Some processors have Tjmax 85 following magic should detect it
-	   Intel won't disclose the information without signed NDA, but
-	   individuals cannot sign it. Catch(ed) 22.
-	*/
+	data->tjmax = adjust_tjmax(c, data->id, &pdev->dev);
+	platform_set_drvdata(pdev, data);
 
-	if (((c->x86_model == 0xf) && (c->x86_mask > 3)) ||
-		(c->x86_model == 0xe))  {
-		err = rdmsr_safe_on_cpu(data->id, 0xee, &eax, &edx);
+	/* read the still undocumented IA32_TEMPERATURE_TARGET it exists
+	   on older CPUs but not in this register */
+
+	if (c->x86_model > 0xe) {
+		err = rdmsr_safe_on_cpu(data->id, 0x1a2, &eax, &edx);
 		if (err) {
-			dev_warn(&pdev->dev,
-				 "Unable to access MSR 0xEE, Tjmax left at %d "
-				 "degrees C\n", data->tjmax/1000);
-		} else if (eax & 0x40000000) {
-			data->tjmax = 85000;
+			dev_warn(&pdev->dev, "Unable to read"
+					" IA32_TEMPERATURE_TARGET MSR\n");
+		} else {
+			data->ttarget = data->tjmax -
+					(((eax >> 8) & 0xff) * 1000);
+			err = device_create_file(&pdev->dev,
+					&sensor_dev_attr_temp1_max.dev_attr);
+			if (err)
+				goto exit_free;
 		}
 	}
 
-	/* Intel says that above should not work for desktop Core2 processors,
-	   but it seems to work. There is no other way how get the absolute
-	   readings. Warn the user about this. First check if are desktop,
-	   bit 50 of MSR_IA32_PLATFORM_ID should be 0.
-	*/
-
-	rdmsr_safe_on_cpu(data->id, MSR_IA32_PLATFORM_ID, &eax, &edx);
-
-	if ((c->x86_model == 0xf) && (!(edx & 0x00040000))) {
-		dev_warn(&pdev->dev, "Using undocumented features, absolute "
-			 "temperature might be wrong!\n");
-	}
-
-	platform_set_drvdata(pdev, data);
-
 	if ((err = sysfs_create_group(&pdev->dev.kobj, &coretemp_group)))
-		goto exit_free;
+		goto exit_dev;
 
 	data->hwmon_dev = hwmon_device_register(&pdev->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -238,6 +280,8 @@ static int __devinit coretemp_probe(struct platform_device *pdev)
 
 exit_class:
 	sysfs_remove_group(&pdev->dev.kobj, &coretemp_group);
+exit_dev:
+	device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr);
 exit_free:
 	kfree(data);
 exit:
@@ -250,6 +294,7 @@ static int __devexit coretemp_remove(struct platform_device *pdev)
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&pdev->dev.kobj, &coretemp_group);
+	device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr);
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);
 	return 0;
@@ -330,7 +375,7 @@ static void coretemp_device_remove(unsigned int cpu)
 	mutex_unlock(&pdev_list_mutex);
 }
 
-static int coretemp_cpu_callback(struct notifier_block *nfb,
+static int __cpuinit coretemp_cpu_callback(struct notifier_block *nfb,
 				 unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long) hcpu;
@@ -347,7 +392,7 @@ static int coretemp_cpu_callback(struct notifier_block *nfb,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block coretemp_cpu_notifier = {
+static struct notifier_block coretemp_cpu_notifier __refdata = {
 	.notifier_call = coretemp_cpu_callback,
 };
 #endif				/* !CONFIG_HOTPLUG_CPU */
@@ -368,10 +413,10 @@ static int __init coretemp_init(void)
 	for_each_online_cpu(i) {
 		struct cpuinfo_x86 *c = &cpu_data(i);
 
-		/* check if family 6, models e, f, 16 */
+		/* check if family 6, models 0xe, 0xf, 0x16, 0x17 */
 		if ((c->cpuid_level < 0) || (c->x86 != 0x6) ||
 		    !((c->x86_model == 0xe) || (c->x86_model == 0xf) ||
-			(c->x86_model == 0x16))) {
+			(c->x86_model == 0x16) || (c->x86_model == 0x17))) {
 
 			/* supported CPU not found, but report the unknown
 			   family 6 CPU */
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index ddddd9f34c1..7673f65877e 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -49,7 +49,7 @@ module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END};
+static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END};
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(dme1737);
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 3f5163de13c..5f300ffed65 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -34,7 +34,7 @@
 #include "lm75.h"
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
 					0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
 
 /* Insmod parameters */
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index 6892f76fc18..1464338e4e1 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -37,7 +37,7 @@
 #include <linux/f75375s.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_2(f75373, f75375);
diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c
index 721c70177b1..ed26b66e083 100644
--- a/drivers/hwmon/fscher.c
+++ b/drivers/hwmon/fscher.c
@@ -40,7 +40,7 @@
  * Addresses to scan
  */
 
-static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
 
 /*
  * Insmod parameters
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index b7c9eef0f92..bd89d270a5e 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -44,7 +44,7 @@
 #include <linux/dmi.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_5(fscpos, fscher, fscscy, fschrc, fschmd);
diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c
index 2f1075323a1..00f48484e54 100644
--- a/drivers/hwmon/fscpos.c
+++ b/drivers/hwmon/fscpos.c
@@ -43,7 +43,7 @@
 /*
  * Addresses to scan
  */
-static unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
 
 /*
  * Insmod parameters
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 3b1ac48fce2..33e9e8a8d1c 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -44,7 +44,7 @@
 #include <linux/sysfs.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_2(gl518sm_r00, gl518sm_r80);
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index 03ecdc33476..8984ef14162 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -39,7 +39,7 @@ module_param(extra_sensor_type, ushort, 0);
 MODULE_PARM_DESC(extra_sensor_type, "Type of extra sensor (0=autodetect, 1=temperature, 2=voltage)");
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(gl520sm);
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 650b07d5b90..11628700808 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -53,7 +53,7 @@
  * Address is fully defined internally and cannot be changed.
  */
 
-static unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x4c, I2C_CLIENT_END };
 
 /*
  * Insmod parameters
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index e5c35a355a5..115f4090b98 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -31,7 +31,7 @@
 
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
 					0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
 
 /* Insmod parameters */
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index 459b70ad6be..36d5a8c3ad8 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -36,7 +36,8 @@
 #include <linux/mutex.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
+						I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(lm77);
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index 0a9eb1f6f4e..ed7859f0e16 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -37,8 +37,8 @@
 static struct platform_device *pdev;
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
-				       0x2e, 0x2f, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
+						0x2e, 0x2f, I2C_CLIENT_END };
 static unsigned short isa_address = 0x290;
 
 /* Insmod parameters */
diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c
index a2ca055f392..26c91c9d476 100644
--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -32,8 +32,8 @@
 #include <linux/mutex.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c,
-					0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
+						0x2e, 0x2f, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(lm80);
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index 6e8903a6e90..6a8642fa25f 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -48,10 +48,8 @@
  * addresses.
  */
 
-static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
-					0x29, 0x2a, 0x2b,
-					0x4c, 0x4d, 0x4e,
-					I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = {
+	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
 
 /*
  * Insmod parameters
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 4bb0f291a6b..182fe6a5605 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -35,7 +35,7 @@
 #include <linux/mutex.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index 8ee07c5c97a..e1c183f0aae 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -73,7 +73,7 @@
  * LM87 has three possible addresses: 0x2c, 0x2d and 0x2e.
  */
 
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
 /*
  * Insmod parameters
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index f7ec95bedbf..d1a3da3dd8e 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -101,10 +101,8 @@
  * 0x4c, 0x4d or 0x4e.
  */
 
-static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
-				       0x29, 0x2a, 0x2b,
-				       0x4c, 0x4d, 0x4e,
-				       I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = {
+	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
 
 /*
  * Insmod parameters
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index af5c77d568f..c31942e0824 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -45,13 +45,14 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
 
 /* The LM92 and MAX6635 have 2 two-state pins for address selection,
    resulting in 4 possible addresses. */
-static unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
-				       I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
+						I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(lm92);
@@ -209,6 +210,14 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ch
 	return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->temp1_input));
 }
 
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int bitnr = to_sensor_dev_attr(attr)->index;
+	struct lm92_data *data = lm92_update_device(dev);
+	return sprintf(buf, "%d\n", (data->temp1_input >> bitnr) & 1);
+}
+
 static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp1_input, NULL);
 static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp1_crit,
 	set_temp1_crit);
@@ -221,6 +230,9 @@ static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp1_max,
 	set_temp1_max);
 static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp1_max_hyst, NULL);
 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 1);
 
 
 /*
@@ -297,7 +309,9 @@ static struct attribute *lm92_attributes[] = {
 	&dev_attr_temp1_max.attr,
 	&dev_attr_temp1_max_hyst.attr,
 	&dev_attr_alarms.attr,
-
+	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
 	NULL
 };
 
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index ea61946a4bf..5e678f5c883 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -142,7 +142,7 @@
 		I2C_FUNC_SMBUS_WORD_DATA)
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(lm93);
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 38a44c3d6ce..7e7267a0454 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -32,14 +32,13 @@
 #include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
 #include <linux/sysfs.h>
 
-static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a,
-					0x29, 0x2a, 0x2b,
-					0x4c, 0x4d, 0x4e,
-					I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = {
+	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
 
 /*
  * Insmod parameters
@@ -161,6 +160,14 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ch
 	return sprintf(buf, "%d\n", data->alarms);
 }
 
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int bitnr = to_sensor_dev_attr(attr)->index;
+	struct max1619_data *data = max1619_update_device(dev);
+	return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
+}
+
 static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
 static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL);
 static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2,
@@ -172,6 +179,10 @@ static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2,
 static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst2,
 	set_temp_hyst2);
 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4);
 
 static struct attribute *max1619_attributes[] = {
 	&dev_attr_temp1_input.attr,
@@ -182,6 +193,10 @@ static struct attribute *max1619_attributes[] = {
 	&dev_attr_temp2_crit_hyst.attr,
 
 	&dev_attr_alarms.attr,
+	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_fault.dev_attr.attr,
+	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
 	NULL
 };
 
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index 755570c1f4e..52d528b76cc 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -44,7 +44,8 @@
  * Addresses to scan. There are four disjoint possibilities, by pin config.
  */
 
-static unsigned short normal_i2c[] = {0x1b, 0x1f, 0x48, 0x4b, I2C_CLIENT_END};
+static const unsigned short normal_i2c[] = {0x1b, 0x1f, 0x48, 0x4b,
+						I2C_CLIENT_END};
 
 /*
  * Insmod parameters
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 0d7f0c4d06b..d1b49854873 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -198,6 +198,14 @@ static ssize_t get_fan_div(struct device *dev, struct device_attribute
 	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index]));
 }
 
+static ssize_t get_fan_alarm(struct device *dev, struct device_attribute
+			     *devattr, char *buf)
+{
+	int bitnr = to_sensor_dev_attr(devattr)->index;
+	struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
+	return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+
 static ssize_t get_pwm(struct device *dev, struct device_attribute
 		       *devattr, char *buf)
 {
@@ -347,6 +355,8 @@ static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,		\
 		get_fan_min, set_fan_min, offset - 1);			\
 static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,		\
 		get_fan_div, set_fan_div, offset - 1);			\
+static SENSOR_DEVICE_ATTR(fan##offset##_alarm, S_IRUGO, get_fan_alarm,	\
+		NULL, offset - 1);					\
 static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,		\
 		get_pwm, set_pwm, offset - 1);				\
 static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,	\
@@ -374,12 +384,15 @@ static struct attribute *smsc47m1_attributes[] = {
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_fan1_min.dev_attr.attr,
 	&sensor_dev_attr_fan1_div.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
 	&sensor_dev_attr_fan2_input.dev_attr.attr,
 	&sensor_dev_attr_fan2_min.dev_attr.attr,
 	&sensor_dev_attr_fan2_div.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
 	&sensor_dev_attr_fan3_input.dev_attr.attr,
 	&sensor_dev_attr_fan3_min.dev_attr.attr,
 	&sensor_dev_attr_fan3_div.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_pwm1.dev_attr.attr,
 	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
@@ -533,7 +546,9 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev)
 		 || (err = device_create_file(dev,
 				&sensor_dev_attr_fan1_min.dev_attr))
 		 || (err = device_create_file(dev,
-				&sensor_dev_attr_fan1_div.dev_attr)))
+				&sensor_dev_attr_fan1_div.dev_attr))
+		 || (err = device_create_file(dev,
+				&sensor_dev_attr_fan1_alarm.dev_attr)))
 			goto error_remove_files;
 	} else
 		dev_dbg(dev, "Fan 1 not enabled by hardware, skipping\n");
@@ -544,7 +559,9 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev)
 		 || (err = device_create_file(dev,
 				&sensor_dev_attr_fan2_min.dev_attr))
 		 || (err = device_create_file(dev,
-				&sensor_dev_attr_fan2_div.dev_attr)))
+				&sensor_dev_attr_fan2_div.dev_attr))
+		 || (err = device_create_file(dev,
+				&sensor_dev_attr_fan2_alarm.dev_attr)))
 			goto error_remove_files;
 	} else
 		dev_dbg(dev, "Fan 2 not enabled by hardware, skipping\n");
@@ -555,7 +572,9 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev)
 		 || (err = device_create_file(dev,
 				&sensor_dev_attr_fan3_min.dev_attr))
 		 || (err = device_create_file(dev,
-				&sensor_dev_attr_fan3_div.dev_attr)))
+				&sensor_dev_attr_fan3_div.dev_attr))
+		 || (err = device_create_file(dev,
+				&sensor_dev_attr_fan3_alarm.dev_attr)))
 			goto error_remove_files;
 	} else if (data->type == smsc47m2)
 		dev_dbg(dev, "Fan 3 not enabled by hardware, skipping\n");
diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c
index 8b0c188e60f..3c9db6598ba 100644
--- a/drivers/hwmon/smsc47m192.c
+++ b/drivers/hwmon/smsc47m192.c
@@ -34,7 +34,7 @@
 #include <linux/mutex.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(smsc47m192);
diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c
index 04dd7699b3a..76a3859c3fb 100644
--- a/drivers/hwmon/thmc50.c
+++ b/drivers/hwmon/thmc50.c
@@ -32,7 +32,7 @@
 MODULE_LICENSE("GPL");
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_2(thmc50, adm1022);
@@ -52,9 +52,9 @@ I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs "
  */
 #define THMC50_REG_INTR				0x41
 
-const static u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 };
-const static u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C };
-const static u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B };
+static const u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 };
+static const u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C };
+static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B };
 
 #define THMC50_REG_CONF_nFANOFF			0x20
 
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 2635bba1e3f..f1ee5e73196 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -533,6 +533,24 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, ch
 }
 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
 
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int bitnr = to_sensor_dev_attr(attr)->index;
+	struct via686a_data *data = via686a_update_device(dev);
+	return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 15);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
+
 static ssize_t show_name(struct device *dev, struct device_attribute
 			 *devattr, char *buf)
 {
@@ -557,6 +575,11 @@ static struct attribute *via686a_attributes[] = {
 	&sensor_dev_attr_in2_max.dev_attr.attr,
 	&sensor_dev_attr_in3_max.dev_attr.attr,
 	&sensor_dev_attr_in4_max.dev_attr.attr,
+	&sensor_dev_attr_in0_alarm.dev_attr.attr,
+	&sensor_dev_attr_in1_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+	&sensor_dev_attr_in3_alarm.dev_attr.attr,
+	&sensor_dev_attr_in4_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	&sensor_dev_attr_temp2_input.dev_attr.attr,
@@ -567,6 +590,9 @@ static struct attribute *via686a_attributes[] = {
 	&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
 	&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
 	&sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
 	&sensor_dev_attr_fan2_input.dev_attr.attr,
@@ -574,6 +600,8 @@ static struct attribute *via686a_attributes[] = {
 	&sensor_dev_attr_fan2_min.dev_attr.attr,
 	&sensor_dev_attr_fan1_div.dev_attr.attr,
 	&sensor_dev_attr_fan2_div.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
 
 	&dev_attr_alarms.attr,
 	&dev_attr_name.attr,
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index f87661775fe..5bc57275cae 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -2,7 +2,7 @@
 	vt8231.c - Part of lm_sensors, Linux kernel modules
 				for hardware monitoring
 
-	Copyright (c) 2005 Roger Lucas <roger@planbit.co.uk>
+	Copyright (c) 2005 Roger Lucas <vt8231@hiddenengine.co.uk>
 	Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
 			   Aaron M. Marsh <amarsh@sdf.lonestar.org>
 
@@ -541,6 +541,28 @@ static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
 
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int bitnr = to_sensor_dev_attr(attr)->index;
+	struct vt8231_data *data = vt8231_update_device(dev);
+	return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
+}
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp5_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp6_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 11);
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7);
+
 static ssize_t show_name(struct device *dev, struct device_attribute
 			 *devattr, char *buf)
 {
@@ -549,36 +571,42 @@ static ssize_t show_name(struct device *dev, struct device_attribute
 }
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 
-static struct attribute *vt8231_attributes_temps[6][4] = {
+static struct attribute *vt8231_attributes_temps[6][5] = {
 	{
 		&dev_attr_temp1_input.attr,
 		&dev_attr_temp1_max_hyst.attr,
 		&dev_attr_temp1_max.attr,
+		&sensor_dev_attr_temp1_alarm.dev_attr.attr,
 		NULL
 	}, {
 		&sensor_dev_attr_temp2_input.dev_attr.attr,
 		&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
 		&sensor_dev_attr_temp2_max.dev_attr.attr,
+		&sensor_dev_attr_temp2_alarm.dev_attr.attr,
 		NULL
 	}, {
 		&sensor_dev_attr_temp3_input.dev_attr.attr,
 		&sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
 		&sensor_dev_attr_temp3_max.dev_attr.attr,
+		&sensor_dev_attr_temp3_alarm.dev_attr.attr,
 		NULL
 	}, {
 		&sensor_dev_attr_temp4_input.dev_attr.attr,
 		&sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
 		&sensor_dev_attr_temp4_max.dev_attr.attr,
+		&sensor_dev_attr_temp4_alarm.dev_attr.attr,
 		NULL
 	}, {
 		&sensor_dev_attr_temp5_input.dev_attr.attr,
 		&sensor_dev_attr_temp5_max_hyst.dev_attr.attr,
 		&sensor_dev_attr_temp5_max.dev_attr.attr,
+		&sensor_dev_attr_temp5_alarm.dev_attr.attr,
 		NULL
 	}, {
 		&sensor_dev_attr_temp6_input.dev_attr.attr,
 		&sensor_dev_attr_temp6_max_hyst.dev_attr.attr,
 		&sensor_dev_attr_temp6_max.dev_attr.attr,
+		&sensor_dev_attr_temp6_alarm.dev_attr.attr,
 		NULL
 	}
 };
@@ -592,36 +620,42 @@ static const struct attribute_group vt8231_group_temps[6] = {
 	{ .attrs = vt8231_attributes_temps[5] },
 };
 
-static struct attribute *vt8231_attributes_volts[6][4] = {
+static struct attribute *vt8231_attributes_volts[6][5] = {
 	{
 		&sensor_dev_attr_in0_input.dev_attr.attr,
 		&sensor_dev_attr_in0_min.dev_attr.attr,
 		&sensor_dev_attr_in0_max.dev_attr.attr,
+		&sensor_dev_attr_in0_alarm.dev_attr.attr,
 		NULL
 	}, {
 		&sensor_dev_attr_in1_input.dev_attr.attr,
 		&sensor_dev_attr_in1_min.dev_attr.attr,
 		&sensor_dev_attr_in1_max.dev_attr.attr,
+		&sensor_dev_attr_in1_alarm.dev_attr.attr,
 		NULL
 	}, {
 		&sensor_dev_attr_in2_input.dev_attr.attr,
 		&sensor_dev_attr_in2_min.dev_attr.attr,
 		&sensor_dev_attr_in2_max.dev_attr.attr,
+		&sensor_dev_attr_in2_alarm.dev_attr.attr,
 		NULL
 	}, {
 		&sensor_dev_attr_in3_input.dev_attr.attr,
 		&sensor_dev_attr_in3_min.dev_attr.attr,
 		&sensor_dev_attr_in3_max.dev_attr.attr,
+		&sensor_dev_attr_in3_alarm.dev_attr.attr,
 		NULL
 	}, {
 		&sensor_dev_attr_in4_input.dev_attr.attr,
 		&sensor_dev_attr_in4_min.dev_attr.attr,
 		&sensor_dev_attr_in4_max.dev_attr.attr,
+		&sensor_dev_attr_in4_alarm.dev_attr.attr,
 		NULL
 	}, {
 		&dev_attr_in5_input.attr,
 		&dev_attr_in5_min.attr,
 		&dev_attr_in5_max.attr,
+		&sensor_dev_attr_in5_alarm.dev_attr.attr,
 		NULL
 	}
 };
@@ -642,6 +676,8 @@ static struct attribute *vt8231_attributes[] = {
 	&sensor_dev_attr_fan2_min.dev_attr.attr,
 	&sensor_dev_attr_fan1_div.dev_attr.attr,
 	&sensor_dev_attr_fan2_div.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
 	&dev_attr_alarms.attr,
 	&dev_attr_name.attr,
 	NULL
@@ -963,7 +999,7 @@ static void __exit sm_vt8231_exit(void)
 	}
 }
 
-MODULE_AUTHOR("Roger Lucas <roger@planbit.co.uk>");
+MODULE_AUTHOR("Roger Lucas <vt8231@hiddenengine.co.uk>");
 MODULE_DESCRIPTION("VT8231 sensors");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 7421f6ea53e..5c85670e2d1 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -53,8 +53,8 @@
 static struct platform_device *pdev;
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
-				       0x2e, 0x2f, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d,
+						0x2e, 0x2f, I2C_CLIENT_END };
 static unsigned short isa_address = 0x290;
 
 /* Insmod parameters */
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 85bd21ee329..85077c4c803 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -47,7 +47,8 @@
 #define NUMBER_OF_TEMPIN	3
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
+						I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(w83791d);
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 007449d3e16..299629d47ed 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -46,7 +46,8 @@
 #include <linux/sysfs.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
+						I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(w83792d);
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index 3ba1d6b3347..ee35af93b57 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -37,7 +37,8 @@
 #include <linux/mutex.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
+						I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(w83793);
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index 1d6259d29e7..77f2d482888 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -49,7 +49,7 @@
  * Address is fully defined internally and cannot be changed.
  */
 
-static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
 
 /*
  * Insmod parameters
diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c
index 1dbee4fa23a..41e22ddb568 100644
--- a/drivers/hwmon/w83l786ng.c
+++ b/drivers/hwmon/w83l786ng.c
@@ -35,7 +35,7 @@
 #include <linux/mutex.h>
 
 /* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2e, 0x2f, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x2e, 0x2f, I2C_CLIENT_END };
 
 /* Insmod parameters */
 I2C_CLIENT_INSMOD_1(w83l786ng);