aboutsummaryrefslogtreecommitdiff
path: root/drivers/i2c/chips
diff options
context:
space:
mode:
authorWolfram Sang <w.sang@pengutronix.de>2009-01-26 21:19:53 +0100
committerJean Delvare <khali@linux-fr.org>2009-01-26 21:19:53 +0100
commit5195e5093bb7d30dbf057b260005cb4ab9761168 (patch)
treeb73c91ea07ad4b6415461fdad8f217b5f721b274 /drivers/i2c/chips
parenta01064a92a1125995fd9078c2305df89a63ed9fe (diff)
i2c: Move at24 to drivers/misc/eeprom
As drivers/i2c/chips is going to go away, move the driver to drivers/misc/eeprom. Other eeprom drivers may be moved here later, too. Update Kconfig text to specify this driver as I2C. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
Diffstat (limited to 'drivers/i2c/chips')
-rw-r--r--drivers/i2c/chips/Kconfig26
-rw-r--r--drivers/i2c/chips/Makefile1
-rw-r--r--drivers/i2c/chips/at24.c582
3 files changed, 0 insertions, 609 deletions
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index b9bef04b7be..b58e77056b2 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -16,32 +16,6 @@ config DS1682
This driver can also be built as a module. If so, the module
will be called ds1682.
-config AT24
- tristate "EEPROMs from most vendors"
- depends on SYSFS && EXPERIMENTAL
- help
- Enable this driver to get read/write support to most I2C EEPROMs,
- after you configure the driver to know about each EEPROM on
- your target board. Use these generic chip names, instead of
- vendor-specific ones like at24c64 or 24lc02:
-
- 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08,
- 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024
-
- Unless you like data loss puzzles, always be sure that any chip
- you configure as a 24c32 (32 kbit) or larger is NOT really a
- 24c16 (16 kbit) or smaller, and vice versa. Marking the chip
- as read-only won't help recover from this. Also, if your chip
- has any software write-protect mechanism you may want to review the
- code to make sure this driver won't turn it on by accident.
-
- If you use this with an SMBus adapter instead of an I2C adapter,
- full functionality is not available. Only smaller devices are
- supported (24c16 and below, max 4 kByte).
-
- This driver can also be built as a module. If so, the module
- will be called at24.
-
config SENSORS_EEPROM
tristate "EEPROM reader"
depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 00fcb5193ac..5c14776eb76 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -11,7 +11,6 @@
#
obj-$(CONFIG_DS1682) += ds1682.o
-obj-$(CONFIG_AT24) += at24.o
obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
diff --git a/drivers/i2c/chips/at24.c b/drivers/i2c/chips/at24.c
deleted file mode 100644
index d4775528abc..00000000000
--- a/drivers/i2c/chips/at24.c
+++ /dev/null
@@ -1,582 +0,0 @@
-/*
- * at24.c - handle most I2C EEPROMs
- *
- * Copyright (C) 2005-2007 David Brownell
- * Copyright (C) 2008 Wolfram Sang, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/sysfs.h>
-#include <linux/mod_devicetable.h>
-#include <linux/log2.h>
-#include <linux/bitops.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-
-/*
- * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable.
- * Differences between different vendor product lines (like Atmel AT24C or
- * MicroChip 24LC, etc) won't much matter for typical read/write access.
- * There are also I2C RAM chips, likewise interchangeable. One example
- * would be the PCF8570, which acts like a 24c02 EEPROM (256 bytes).
- *
- * However, misconfiguration can lose data. "Set 16-bit memory address"
- * to a part with 8-bit addressing will overwrite data. Writing with too
- * big a page size also loses data. And it's not safe to assume that the
- * conventional addresses 0x50..0x57 only hold eeproms; a PCF8563 RTC
- * uses 0x51, for just one example.
- *
- * Accordingly, explicit board-specific configuration data should be used
- * in almost all cases. (One partial exception is an SMBus used to access
- * "SPD" data for DRAM sticks. Those only use 24c02 EEPROMs.)
- *
- * So this driver uses "new style" I2C driver binding, expecting to be
- * told what devices exist. That may be in arch/X/mach-Y/board-Z.c or
- * similar kernel-resident tables; or, configuration data coming from
- * a bootloader.
- *
- * Other than binding model, current differences from "eeprom" driver are
- * that this one handles write access and isn't restricted to 24c02 devices.
- * It also handles larger devices (32 kbit and up) with two-byte addresses,
- * which won't work on pure SMBus systems.
- */
-
-struct at24_data {
- struct at24_platform_data chip;
- bool use_smbus;
-
- /*
- * Lock protects against activities from other Linux tasks,
- * but not from changes by other I2C masters.
- */
- struct mutex lock;
- struct bin_attribute bin;
-
- u8 *writebuf;
- unsigned write_max;
- unsigned num_addresses;
-
- /*
- * Some chips tie up multiple I2C addresses; dummy devices reserve
- * them for us, and we'll use them with SMBus calls.
- */
- struct i2c_client *client[];
-};
-
-/*
- * This parameter is to help this driver avoid blocking other drivers out
- * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C
- * clock, one 256 byte read takes about 1/43 second which is excessive;
- * but the 1/170 second it takes at 400 kHz may be quite reasonable; and
- * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible.
- *
- * This value is forced to be a power of two so that writes align on pages.
- */
-static unsigned io_limit = 128;
-module_param(io_limit, uint, 0);
-MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)");
-
-/*
- * Specs often allow 5 msec for a page write, sometimes 20 msec;
- * it's important to recover from write timeouts.
- */
-static unsigned write_timeout = 25;
-module_param(write_timeout, uint, 0);
-MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)");
-
-#define AT24_SIZE_BYTELEN 5
-#define AT24_SIZE_FLAGS 8
-
-#define AT24_BITMASK(x) (BIT(x) - 1)
-
-/* create non-zero magic value for given eeprom parameters */
-#define AT24_DEVICE_MAGIC(_len, _flags) \
- ((1 << AT24_SIZE_FLAGS | (_flags)) \
- << AT24_SIZE_BYTELEN | ilog2(_len))
-
-static const struct i2c_device_id at24_ids[] = {
- /* needs 8 addresses as A0-A2 are ignored */
- { "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) },
- /* old variants can't be handled with this generic entry! */
- { "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) },
- { "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) },
- /* spd is a 24c02 in memory DIMMs */
- { "spd", AT24_DEVICE_MAGIC(2048 / 8,
- AT24_FLAG_READONLY | AT24_FLAG_IRUGO) },
- { "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) },
- /* 24rf08 quirk is handled at i2c-core */
- { "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) },
- { "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) },
- { "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) },
- { "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) },
- { "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) },
- { "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) },
- { "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) },
- { "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) },
- { "at24", 0 },
- { /* END OF LIST */ }
-};
-MODULE_DEVICE_TABLE(i2c, at24_ids);
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * This routine supports chips which consume multiple I2C addresses. It
- * computes the addressing information to be used for a given r/w request.
- * Assumes that sanity checks for offset happened at sysfs-layer.
- */
-static struct i2c_client *at24_translate_offset(struct at24_data *at24,
- unsigned *offset)
-{
- unsigned i;
-
- if (at24->chip.flags & AT24_FLAG_ADDR16) {
- i = *offset >> 16;
- *offset &= 0xffff;
- } else {
- i = *offset >> 8;
- *offset &= 0xff;
- }
-
- return at24->client[i];
-}
-
-static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf,
- unsigned offset, size_t count)
-{
- struct i2c_msg msg[2];
- u8 msgbuf[2];
- struct i2c_client *client;
- int status, i;
-
- memset(msg, 0, sizeof(msg));
-
- /*
- * REVISIT some multi-address chips don't rollover page reads to
- * the next slave address, so we may need to truncate the count.
- * Those chips might need another quirk flag.
- *
- * If the real hardware used four adjacent 24c02 chips and that
- * were misconfigured as one 24c08, that would be a similar effect:
- * one "eeprom" file not four, but larger reads would fail when
- * they crossed certain pages.
- */
-
- /*
- * Slave address and byte offset derive from the offset. Always
- * set the byte address; on a multi-master board, another master
- * may have changed the chip's "current" address pointer.
- */
- client = at24_translate_offset(at24, &offset);
-
- if (count > io_limit)
- count = io_limit;
-
- /* Smaller eeproms can work given some SMBus extension calls */
- if (at24->use_smbus) {
- if (count > I2C_SMBUS_BLOCK_MAX)
- count = I2C_SMBUS_BLOCK_MAX;
- status = i2c_smbus_read_i2c_block_data(client, offset,
- count, buf);
- dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
- count, offset, status);
- return (status < 0) ? -EIO : status;
- }
-
- /*
- * When we have a better choice than SMBus calls, use a combined
- * I2C message. Write address; then read up to io_limit data bytes.
- * Note that read page rollover helps us here (unlike writes).
- * msgbuf is u8 and will cast to our needs.
- */
- i = 0;
- if (at24->chip.flags & AT24_FLAG_ADDR16)
- msgbuf[i++] = offset >> 8;
- msgbuf[i++] = offset;
-
- msg[0].addr = client->addr;
- msg[0].buf = msgbuf;
- msg[0].len = i;
-
- msg[1].addr = client->addr;
- msg[1].flags = I2C_M_RD;
- msg[1].buf = buf;
- msg[1].len = count;
-
- status = i2c_transfer(client->adapter, msg, 2);
- dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
- count, offset, status);
-
- if (status == 2)
- return count;
- else if (status >= 0)
- return -EIO;
- else
- return status;
-}
-
-static ssize_t at24_bin_read(struct kobject *kobj, struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
-{
- struct at24_data *at24;
- ssize_t retval = 0;
-
- at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
-
- if (unlikely(!count))
- return count;
-
- /*
- * Read data from chip, protecting against concurrent updates
- * from this host, but not from other I2C masters.
- */
- mutex_lock(&at24->lock);
-
- while (count) {
- ssize_t status;
-
- status = at24_eeprom_read(at24, buf, off, count);
- if (status <= 0) {
- if (retval == 0)
- retval = status;
- break;
- }
- buf += status;
- off += status;
- count -= status;
- retval += status;
- }
-
- mutex_unlock(&at24->lock);
-
- return retval;
-}
-
-
-/*
- * REVISIT: export at24_bin{read,write}() to let other kernel code use
- * eeprom data. For example, it might hold a board's Ethernet address, or
- * board-specific calibration data generated on the manufacturing floor.
- */
-
-
-/*
- * Note that if the hardware write-protect pin is pulled high, the whole
- * chip is normally write protected. But there are plenty of product
- * variants here, including OTP fuses and partial chip protect.
- *
- * We only use page mode writes; the alternative is sloooow. This routine
- * writes at most one page.
- */
-static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
- unsigned offset, size_t count)
-{
- struct i2c_client *client;
- struct i2c_msg msg;
- ssize_t status;
- unsigned long timeout, write_time;
- unsigned next_page;
-
- /* Get corresponding I2C address and adjust offset */
- client = at24_translate_offset(at24, &offset);
-
- /* write_max is at most a page */
- if (count > at24->write_max)
- count = at24->write_max;
-
- /* Never roll over backwards, to the start of this page */
- next_page = roundup(offset + 1, at24->chip.page_size);
- if (offset + count > next_page)
- count = next_page - offset;
-
- /* If we'll use I2C calls for I/O, set up the message */
- if (!at24->use_smbus) {
- int i = 0;
-
- msg.addr = client->addr;
- msg.flags = 0;
-
- /* msg.buf is u8 and casts will mask the values */
- msg.buf = at24->writebuf;
- if (at24->chip.flags & AT24_FLAG_ADDR16)
- msg.buf[i++] = offset >> 8;
-
- msg.buf[i++] = offset;
- memcpy(&msg.buf[i], buf, count);
- msg.len = i + count;
- }
-
- /*
- * Writes fail if the previous one didn't complete yet. We may
- * loop a few times until this one succeeds, waiting at least
- * long enough for one entire page write to work.
- */
- timeout = jiffies + msecs_to_jiffies(write_timeout);
- do {
- write_time = jiffies;
- if (at24->use_smbus) {
- status = i2c_smbus_write_i2c_block_data(client,
- offset, count, buf);
- if (status == 0)
- status = count;
- } else {
- status = i2c_transfer(client->adapter, &msg, 1);
- if (status == 1)
- status = count;
- }
- dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n",
- count, offset, status, jiffies);
-
- if (status == count)
- return count;
-
- /* REVISIT: at HZ=100, this is sloooow */
- msleep(1);
- } while (time_before(write_time, timeout));
-
- return -ETIMEDOUT;
-}
-
-static ssize_t at24_bin_write(struct kobject *kobj, struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
-{
- struct at24_data *at24;
- ssize_t retval = 0;
-
- at24 = dev_get_drvdata(container_of(kobj, struct device, kobj));
-
- if (unlikely(!count))
- return count;
-
- /*
- * Write data to chip, protecting against concurrent updates
- * from this host, but not from other I2C masters.
- */
- mutex_lock(&at24->lock);
-
- while (count) {
- ssize_t status;
-
- status = at24_eeprom_write(at24, buf, off, count);
- if (status <= 0) {
- if (retval == 0)
- retval = status;
- break;
- }
- buf += status;
- off += status;
- count -= status;
- retval += status;
- }
-
- mutex_unlock(&at24->lock);
-
- return retval;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
- struct at24_platform_data chip;
- bool writable;
- bool use_smbus = false;
- struct at24_data *at24;
- int err;
- unsigned i, num_addresses;
- kernel_ulong_t magic;
-
- if (client->dev.platform_data) {
- chip = *(struct at24_platform_data *)client->dev.platform_data;
- } else {
- if (!id->driver_data) {
- err = -ENODEV;
- goto err_out;
- }
- magic = id->driver_data;
- chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN));
- magic >>= AT24_SIZE_BYTELEN;
- chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS);
- /*
- * This is slow, but we can't know all eeproms, so we better
- * play safe. Specifying custom eeprom-types via platform_data
- * is recommended anyhow.
- */
- chip.page_size = 1;
- }
-
- if (!is_power_of_2(chip.byte_len))
- dev_warn(&client->dev,
- "byte_len looks suspicious (no power of 2)!\n");
- if (!is_power_of_2(chip.page_size))
- dev_warn(&client->dev,
- "page_size looks suspicious (no power of 2)!\n");
-
- /* Use I2C operations unless we're stuck with SMBus extensions. */
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
- if (chip.flags & AT24_FLAG_ADDR16) {
- err = -EPFNOSUPPORT;
- goto err_out;
- }
- if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
- err = -EPFNOSUPPORT;
- goto err_out;
- }
- use_smbus = true;
- }
-
- if (chip.flags & AT24_FLAG_TAKE8ADDR)
- num_addresses = 8;
- else
- num_addresses = DIV_ROUND_UP(chip.byte_len,
- (chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256);
-
- at24 = kzalloc(sizeof(struct at24_data) +
- num_addresses * sizeof(struct i2c_client *), GFP_KERNEL);
- if (!at24) {
- err = -ENOMEM;
- goto err_out;
- }
-
- mutex_init(&at24->lock);
- at24->use_smbus = use_smbus;
- at24->chip = chip;
- at24->num_addresses = num_addresses;
-
- /*
- * Export the EEPROM bytes through sysfs, since that's convenient.
- * By default, only root should see the data (maybe passwords etc)
- */
- at24->bin.attr.name = "eeprom";
- at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR;
- at24->bin.read = at24_bin_read;
- at24->bin.size = chip.byte_len;
-
- writable = !(chip.flags & AT24_FLAG_READONLY);
- if (writable) {
- if (!use_smbus || i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) {
-
- unsigned write_max = chip.page_size;
-
- at24->bin.write = at24_bin_write;
- at24->bin.attr.mode |= S_IWUSR;
-
- if (write_max > io_limit)
- write_max = io_limit;
- if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
- write_max = I2C_SMBUS_BLOCK_MAX;
- at24->write_max = write_max;
-
- /* buffer (data + address at the beginning) */
- at24->writebuf = kmalloc(write_max + 2, GFP_KERNEL);
- if (!at24->writebuf) {
- err = -ENOMEM;
- goto err_struct;
- }
- } else {
- dev_warn(&client->dev,
- "cannot write due to controller restrictions.");
- }
- }
-
- at24->client[0] = client;
-
- /* use dummy devices for multiple-address chips */
- for (i = 1; i < num_addresses; i++) {
- at24->client[i] = i2c_new_dummy(client->adapter,
- client->addr + i);
- if (!at24->client[i]) {
- dev_err(&client->dev, "address 0x%02x unavailable\n",
- client->addr + i);
- err = -EADDRINUSE;
- goto err_clients;
- }
- }
-
- err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin);
- if (err)
- goto err_clients;
-
- i2c_set_clientdata(client, at24);
-
- dev_info(&client->dev, "%zu byte %s EEPROM %s\n",
- at24->bin.size, client->name,
- writable ? "(writable)" : "(read-only)");
- dev_dbg(&client->dev,
- "page_size %d, num_addresses %d, write_max %d%s\n",
- chip.page_size, num_addresses,
- at24->write_max,
- use_smbus ? ", use_smbus" : "");
-
- return 0;
-
-err_clients:
- for (i = 1; i < num_addresses; i++)
- if (at24->client[i])
- i2c_unregister_device(at24->client[i]);
-
- kfree(at24->writebuf);
-err_struct:
- kfree(at24);
-err_out:
- dev_dbg(&client->dev, "probe error %d\n", err);
- return err;
-}
-
-static int __devexit at24_remove(struct i2c_client *client)
-{
- struct at24_data *at24;
- int i;
-
- at24 = i2c_get_clientdata(client);
- sysfs_remove_bin_file(&client->dev.kobj, &at24->bin);
-
- for (i = 1; i < at24->num_addresses; i++)
- i2c_unregister_device(at24->client[i]);
-
- kfree(at24->writebuf);
- kfree(at24);
- i2c_set_clientdata(client, NULL);
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct i2c_driver at24_driver = {
- .driver = {
- .name = "at24",
- .owner = THIS_MODULE,
- },
- .probe = at24_probe,
- .remove = __devexit_p(at24_remove),
- .id_table = at24_ids,
-};
-
-static int __init at24_init(void)
-{
- io_limit = rounddown_pow_of_two(io_limit);
- return i2c_add_driver(&at24_driver);
-}
-module_init(at24_init);
-
-static void __exit at24_exit(void)
-{
- i2c_del_driver(&at24_driver);
-}
-module_exit(at24_exit);
-
-MODULE_DESCRIPTION("Driver for most I2C EEPROMs");
-MODULE_AUTHOR("David Brownell and Wolfram Sang");
-MODULE_LICENSE("GPL");