Merge branch 'master' into gfs2

5 files changed, 26 insertions, 23 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 9e56c3989d6..0d9667921f6 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -196,7 +196,7 @@ config I2C_IBM_IIC
 
 config I2C_IOP3XX
 	tristate "Intel IOP3xx and IXP4xx on-chip I2C interface"
-	depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C
+	depends on (ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX) && I2C
 	help
 	  Say Y here if you want to use the IIC bus controller on
 	  the Intel IOP3xx I/O Processors or IXP4xx Network Processors.
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 8e413150af3..4436c89be58 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -82,14 +82,16 @@ iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap)
 
 	/* 
 	 * Every time unit enable is asserted, GPOD needs to be cleared
-	 * on IOP321 to avoid data corruption on the bus.
+	 * on IOP3XX to avoid data corruption on the bus.
 	 */
-#ifdef CONFIG_ARCH_IOP321
-#define IOP321_GPOD_I2C0    0x00c0  /* clear these bits to enable ch0 */
-#define IOP321_GPOD_I2C1    0x0030  /* clear these bits to enable ch1 */
-
-	*IOP321_GPOD &= (iop3xx_adap->id == 0) ? ~IOP321_GPOD_I2C0 : 
-		~IOP321_GPOD_I2C1;
+#ifdef CONFIG_PLAT_IOP
+	if (iop3xx_adap->id == 0) {
+		gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW);
+		gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW);
+	} else {
+		gpio_line_set(IOP3XX_GPIO_LINE(5), GPIO_LOW);
+		gpio_line_set(IOP3XX_GPIO_LINE(4), GPIO_LOW);
+	}
 #endif
 	/* NB SR bits not same position as CR IE bits :-( */
 	iop3xx_adap->SR_enabled = 
diff --git a/drivers/i2c/busses/i2c-ite.c b/drivers/i2c/busses/i2c-ite.c
index d82e6dae840..559a62b04ee 100644
--- a/drivers/i2c/busses/i2c-ite.c
+++ b/drivers/i2c/busses/i2c-ite.c
@@ -109,7 +109,7 @@ static int iic_ite_getclock(void *data)
 static void iic_ite_waitforpin(void) {
    DEFINE_WAIT(wait);
    int timeout = 2;
-   long flags;
+   unsigned long flags;
 
    /* If interrupts are enabled (which they are), then put the process to
     * sleep.  This process will be awakened by two events -- either the
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 8f2b1f0deb8..0ca599d3b40 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -210,8 +210,8 @@ static int __init i2c_sibyte_init(void)
 
 static void __exit i2c_sibyte_exit(void)
 {
-	i2c_del_bus(&sibyte_board_adapter[0]);
-	i2c_del_bus(&sibyte_board_adapter[1]);
+	i2c_del_adapter(&sibyte_board_adapter[0]);
+	i2c_del_adapter(&sibyte_board_adapter[1]);
 }
 
 module_init(i2c_sibyte_init);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 01233f0f777..7ca81f42d14 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -420,14 +420,6 @@ int i2c_attach_client(struct i2c_client *client)
 	}
 	list_add_tail(&client->list,&adapter->clients);
 	
-	if (adapter->client_register)  {
-		if (adapter->client_register(client))  {
-			dev_dbg(&adapter->dev, "client_register "
-				"failed for client [%s] at 0x%02x\n",
-				client->name, client->addr);
-		}
-	}
-
 	client->usage_count = 0;
 
 	client->dev.parent = &client->adapter->dev;
@@ -445,10 +437,17 @@ int i2c_attach_client(struct i2c_client *client)
 	res = device_create_file(&client->dev, &dev_attr_client_name);
 	if (res)
 		goto out_unregister;
-
-out_unlock:
 	mutex_unlock(&adapter->clist_lock);
-	return res;
+
+	if (adapter->client_register)  {
+		if (adapter->client_register(client)) {
+			dev_dbg(&adapter->dev, "client_register "
+				"failed for client [%s] at 0x%02x\n",
+				client->name, client->addr);
+		}
+	}
+
+	return 0;
 
 out_unregister:
 	init_completion(&client->released); /* Needed? */
@@ -458,7 +457,9 @@ out_list:
 	list_del(&client->list);
 	dev_err(&adapter->dev, "Failed to attach i2c client %s at 0x%02x "
 		"(%d)\n", client->name, client->addr, res);
-	goto out_unlock;
+out_unlock:
+	mutex_unlock(&adapter->clist_lock);
+	return res;
 }