aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/pci/delkin_cb.c
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
commit2bfba3c444fe8b2ab1c38112a89d8f03b61136ca (patch)
tree17580eee63d868c9d6b97a6bc956a08f25631532 /drivers/ide/pci/delkin_cb.c
parent2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4 (diff)
ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/pci/delkin_cb.c')
-rw-r--r--drivers/ide/pci/delkin_cb.c192
1 files changed, 0 insertions, 192 deletions
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
deleted file mode 100644
index 8f1b2d9f051..00000000000
--- a/drivers/ide/pci/delkin_cb.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * Created 20 Oct 2004 by Mark Lord
- *
- * Basic support for Delkin/ASKA/Workbit Cardbus CompactFlash adapter
- *
- * Modeled after the 16-bit PCMCIA driver: ide-cs.c
- *
- * This is slightly peculiar, in that it is a PCI driver,
- * but is NOT an IDE PCI driver -- the IDE layer does not directly
- * support hot insertion/removal of PCI interfaces, so this driver
- * is unable to use the IDE PCI interfaces. Instead, it uses the
- * same interfaces as the ide-cs (PCMCIA) driver uses.
- * On the plus side, the driver is also smaller/simpler this way.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/io.h>
-
-/*
- * No chip documentation has yet been found,
- * so these configuration values were pulled from
- * a running Win98 system using "debug".
- * This gives around 3MByte/second read performance,
- * which is about 2/3 of what the chip is capable of.
- *
- * There is also a 4KByte mmio region on the card,
- * but its purpose has yet to be reverse-engineered.
- */
-static const u8 setup[] = {
- 0x00, 0x05, 0xbe, 0x01, 0x20, 0x8f, 0x00, 0x00,
- 0xa4, 0x1f, 0xb3, 0x1b, 0x00, 0x00, 0x00, 0x80,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0xa4, 0x83, 0x02, 0x13,
-};
-
-static const struct ide_port_ops delkin_cb_port_ops = {
- .quirkproc = ide_undecoded_slave,
-};
-
-static unsigned int delkin_cb_init_chipset(struct pci_dev *dev)
-{
- unsigned long base = pci_resource_start(dev, 0);
- int i;
-
- outb(0x02, base + 0x1e); /* set nIEN to block interrupts */
- inb(base + 0x17); /* read status to clear interrupts */
-
- for (i = 0; i < sizeof(setup); ++i) {
- if (setup[i])
- outb(setup[i], base + i);
- }
-
- return 0;
-}
-
-static const struct ide_port_info delkin_cb_port_info = {
- .port_ops = &delkin_cb_port_ops,
- .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS |
- IDE_HFLAG_NO_DMA,
- .init_chipset = delkin_cb_init_chipset,
-};
-
-static int __devinit
-delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_host *host;
- unsigned long base;
- int rc;
- hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-
- rc = pci_enable_device(dev);
- if (rc) {
- printk(KERN_ERR "delkin_cb: pci_enable_device failed (%d)\n", rc);
- return rc;
- }
- rc = pci_request_regions(dev, "delkin_cb");
- if (rc) {
- printk(KERN_ERR "delkin_cb: pci_request_regions failed (%d)\n", rc);
- pci_disable_device(dev);
- return rc;
- }
- base = pci_resource_start(dev, 0);
-
- delkin_cb_init_chipset(dev);
-
- memset(&hw, 0, sizeof(hw));
- ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
- hw.irq = dev->irq;
- hw.dev = &dev->dev;
- hw.chipset = ide_pci; /* this enables IRQ sharing */
-
- rc = ide_host_add(&delkin_cb_port_info, hws, &host);
- if (rc)
- goto out_disable;
-
- pci_set_drvdata(dev, host);
-
- return 0;
-
-out_disable:
- pci_release_regions(dev);
- pci_disable_device(dev);
- return rc;
-}
-
-static void
-delkin_cb_remove (struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
-
- ide_host_remove(host);
-
- pci_release_regions(dev);
- pci_disable_device(dev);
-}
-
-#ifdef CONFIG_PM
-static int delkin_cb_suspend(struct pci_dev *dev, pm_message_t state)
-{
- pci_save_state(dev);
- pci_disable_device(dev);
- pci_set_power_state(dev, pci_choose_state(dev, state));
-
- return 0;
-}
-
-static int delkin_cb_resume(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- int rc;
-
- pci_set_power_state(dev, PCI_D0);
-
- rc = pci_enable_device(dev);
- if (rc)
- return rc;
-
- pci_restore_state(dev);
- pci_set_master(dev);
-
- if (host->init_chipset)
- host->init_chipset(dev);
-
- return 0;
-}
-#else
-#define delkin_cb_suspend NULL
-#define delkin_cb_resume NULL
-#endif
-
-static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = {
- { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl);
-
-static struct pci_driver delkin_cb_pci_driver = {
- .name = "Delkin-ASKA-Workbit Cardbus IDE",
- .id_table = delkin_cb_pci_tbl,
- .probe = delkin_cb_probe,
- .remove = delkin_cb_remove,
- .suspend = delkin_cb_suspend,
- .resume = delkin_cb_resume,
-};
-
-static int __init delkin_cb_init(void)
-{
- return pci_register_driver(&delkin_cb_pci_driver);
-}
-
-static void __exit delkin_cb_exit(void)
-{
- pci_unregister_driver(&delkin_cb_pci_driver);
-}
-
-module_init(delkin_cb_init);
-module_exit(delkin_cb_exit);
-
-MODULE_AUTHOR("Mark Lord");
-MODULE_DESCRIPTION("Basic support for Delkin/ASKA/Workbit Cardbus IDE");
-MODULE_LICENSE("GPL");
-