diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/ide/pci/trm290.c |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/ide/pci/trm290.c')
-rw-r--r-- | drivers/ide/pci/trm290.c | 369 |
1 files changed, 369 insertions, 0 deletions
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c new file mode 100644 index 00000000000..8b5eea5405e --- /dev/null +++ b/drivers/ide/pci/trm290.c @@ -0,0 +1,369 @@ +/* + * linux/drivers/ide/pci/trm290.c Version 1.02 Mar. 18, 2000 + * + * Copyright (c) 1997-1998 Mark Lord + * May be copied or modified under the terms of the GNU General Public License + * + * June 22, 2004 - get rid of check_region + * Jesper Juhl <juhl-lkml@dif.dk> + * + */ + +/* + * This module provides support for the bus-master IDE DMA function + * of the Tekram TRM290 chip, used on a variety of PCI IDE add-on boards, + * including a "Precision Instruments" board. The TRM290 pre-dates + * the sff-8038 standard (ide-dma.c) by a few months, and differs + * significantly enough to warrant separate routines for some functions, + * while re-using others from ide-dma.c. + * + * EXPERIMENTAL! It works for me (a sample of one). + * + * Works reliably for me in DMA mode (READs only), + * DMA WRITEs are disabled by default (see #define below); + * + * DMA is not enabled automatically for this chipset, + * but can be turned on manually (with "hdparm -d1") at run time. + * + * I need volunteers with "spare" drives for further testing + * and development, and maybe to help figure out the peculiarities. + * Even knowing the registers (below), some things behave strangely. + */ + +#define TRM290_NO_DMA_WRITES /* DMA writes seem unreliable sometimes */ + +/* + * TRM-290 PCI-IDE2 Bus Master Chip + * ================================ + * The configuration registers are addressed in normal I/O port space + * and are used as follows: + * + * trm290_base depends on jumper settings, and is probed for by ide-dma.c + * + * trm290_base+2 when WRITTEN: chiptest register (byte, write-only) + * bit7 must always be written as "1" + * bits6-2 undefined + * bit1 1=legacy_compatible_mode, 0=native_pci_mode + * bit0 1=test_mode, 0=normal(default) + * + * trm290_base+2 when READ: status register (byte, read-only) + * bits7-2 undefined + * bit1 channel0 busmaster interrupt status 0=none, 1=asserted + * bit0 channel0 interrupt status 0=none, 1=asserted + * + * trm290_base+3 Interrupt mask register + * bits7-5 undefined + * bit4 legacy_header: 1=present, 0=absent + * bit3 channel1 busmaster interrupt status 0=none, 1=asserted (read only) + * bit2 channel1 interrupt status 0=none, 1=asserted (read only) + * bit1 channel1 interrupt mask: 1=masked, 0=unmasked(default) + * bit0 channel0 interrupt mask: 1=masked, 0=unmasked(default) + * + * trm290_base+1 "CPR" Config Pointer Register (byte) + * bit7 1=autoincrement CPR bits 2-0 after each access of CDR + * bit6 1=min. 1 wait-state posted write cycle (default), 0=0 wait-state + * bit5 0=enabled master burst access (default), 1=disable (write only) + * bit4 PCI DEVSEL# timing select: 1=medium(default), 0=fast + * bit3 0=primary IDE channel, 1=secondary IDE channel + * bits2-0 register index for accesses through CDR port + * + * trm290_base+0 "CDR" Config Data Register (word) + * two sets of seven config registers, + * selected by CPR bit 3 (channel) and CPR bits 2-0 (index 0 to 6), + * each index defined below: + * + * Index-0 Base address register for command block (word) + * defaults: 0x1f0 for primary, 0x170 for secondary + * + * Index-1 general config register (byte) + * bit7 1=DMA enable, 0=DMA disable + * bit6 1=activate IDE_RESET, 0=no action (default) + * bit5 1=enable IORDY, 0=disable IORDY (default) + * bit4 0=16-bit data port(default), 1=8-bit (XT) data port + * bit3 interrupt polarity: 1=active_low, 0=active_high(default) + * bit2 power-saving-mode(?): 1=enable, 0=disable(default) (write only) + * bit1 bus_master_mode(?): 1=enable, 0=disable(default) + * bit0 enable_io_ports: 1=enable(default), 0=disable + * + * Index-2 read-ahead counter preload bits 0-7 (byte, write only) + * bits7-0 bits7-0 of readahead count + * + * Index-3 read-ahead config register (byte, write only) + * bit7 1=enable_readahead, 0=disable_readahead(default) + * bit6 1=clear_FIFO, 0=no_action + * bit5 undefined + * bit4 mode4 timing control: 1=enable, 0=disable(default) + * bit3 undefined + * bit2 undefined + * bits1-0 bits9-8 of read-ahead count + * + * Index-4 base address register for control block (word) + * defaults: 0x3f6 for primary, 0x376 for secondary + * + * Index-5 data port timings (shared by both drives) (byte) + * standard PCI "clk" (clock) counts, default value = 0xf5 + * + * bits7-6 setup time: 00=1clk, 01=2clk, 10=3clk, 11=4clk + * bits5-3 hold time: 000=1clk, 001=2clk, 010=3clk, + * 011=4clk, 100=5clk, 101=6clk, + * 110=8clk, 111=12clk + * bits2-0 active time: 000=2clk, 001=3clk, 010=4clk, + * 011=5clk, 100=6clk, 101=8clk, + * 110=12clk, 111=16clk + * + * Index-6 command/control port timings (shared by both drives) (byte) + * same layout as Index-5, default value = 0xde + * + * Suggested CDR programming for PIO mode0 (600ns): + * 0x01f0,0x21,0xff,0x80,0x03f6,0xf5,0xde ; primary + * 0x0170,0x21,0xff,0x80,0x0376,0xf5,0xde ; secondary + * + * Suggested CDR programming for PIO mode3 (180ns): + * 0x01f0,0x21,0xff,0x80,0x03f6,0x09,0xde ; primary + * 0x0170,0x21,0xff,0x80,0x0376,0x09,0xde ; secondary + * + * Suggested CDR programming for PIO mode4 (120ns): + * 0x01f0,0x21,0xff,0x80,0x03f6,0x00,0xde ; primary + * 0x0170,0x21,0xff,0x80,0x0376,0x00,0xde ; secondary + * + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/blkdev.h> +#include <linux/init.h> +#include <linux/hdreg.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/ide.h> + +#include <asm/io.h> + +static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma) +{ + ide_hwif_t *hwif = HWIF(drive); + u16 reg = 0; + unsigned long flags; + + /* select PIO or DMA */ + reg = use_dma ? (0x21 | 0x82) : (0x21 & ~0x82); + + local_irq_save(flags); + + if (reg != hwif->select_data) { + hwif->select_data = reg; + /* set PIO/DMA */ + hwif->OUTB(0x51|(hwif->channel<<3), hwif->config_data+1); + hwif->OUTW(reg & 0xff, hwif->config_data); + } + + /* enable IRQ if not probing */ + if (drive->present) { + reg = hwif->INW(hwif->config_data + 3); + reg &= 0x13; + reg &= ~(1 << hwif->channel); + hwif->OUTW(reg, hwif->config_data+3); + } + + local_irq_restore(flags); +} + +static void trm290_selectproc (ide_drive_t *drive) +{ + trm290_prepare_drive(drive, drive->using_dma); +} + +#ifdef CONFIG_BLK_DEV_IDEDMA +static void trm290_ide_dma_exec_cmd(ide_drive_t *drive, u8 command) +{ + ide_hwif_t *hwif = HWIF(drive); + + if (HWGROUP(drive)->handler != NULL) /* paranoia check */ + BUG(); + ide_set_handler(drive, &ide_dma_intr, WAIT_CMD, NULL); + /* issue cmd to drive */ + hwif->OUTB(command, IDE_COMMAND_REG); +} + +static int trm290_ide_dma_setup(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + struct request *rq = hwif->hwgroup->rq; + unsigned int count, rw; + + if (rq_data_dir(rq)) { +#ifdef TRM290_NO_DMA_WRITES + /* always use PIO for writes */ + trm290_prepare_drive(drive, 0); /* select PIO xfer */ + return 1; +#endif + rw = 1; + } else + rw = 2; + + if (!(count = ide_build_dmatable(drive, rq))) { + /* try PIO instead of DMA */ + trm290_prepare_drive(drive, 0); /* select PIO xfer */ + return 1; + } + /* select DMA xfer */ + trm290_prepare_drive(drive, 1); + hwif->OUTL(hwif->dmatable_dma|rw, hwif->dma_command); + drive->waiting_for_dma = 1; + /* start DMA */ + hwif->OUTW((count * 2) - 1, hwif->dma_status); + return 0; +} + +static void trm290_ide_dma_start(ide_drive_t *drive) +{ +} + +static int trm290_ide_dma_end (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u16 status = 0; + + drive->waiting_for_dma = 0; + /* purge DMA mappings */ + ide_destroy_dmatable(drive); + status = hwif->INW(hwif->dma_status); + return (status != 0x00ff); +} + +static int trm290_ide_dma_test_irq (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u16 status = 0; + + status = hwif->INW(hwif->dma_status); + return (status == 0x00ff); +} +#endif /* CONFIG_BLK_DEV_IDEDMA */ + +/* + * Invoked from ide-dma.c at boot time. + */ +static void __devinit init_hwif_trm290(ide_hwif_t *hwif) +{ + unsigned int cfgbase = 0; + unsigned long flags; + u8 reg = 0; + struct pci_dev *dev = hwif->pci_dev; + + hwif->no_lba48 = 1; + hwif->chipset = ide_trm290; + cfgbase = pci_resource_start(dev, 4); + if ((dev->class & 5) && cfgbase) { + hwif->config_data = cfgbase; + printk(KERN_INFO "TRM290: chip config base at 0x%04lx\n", + hwif->config_data); + } else { + hwif->config_data = 0x3df0; + printk(KERN_INFO "TRM290: using default config base at 0x%04lx\n", + hwif->config_data); + } + + local_irq_save(flags); + /* put config reg into first byte of hwif->select_data */ + hwif->OUTB(0x51|(hwif->channel<<3), hwif->config_data+1); + /* select PIO as default */ + hwif->select_data = 0x21; + hwif->OUTB(hwif->select_data, hwif->config_data); + /* get IRQ info */ + reg = hwif->INB(hwif->config_data+3); + /* mask IRQs for both ports */ + reg = (reg & 0x10) | 0x03; + hwif->OUTB(reg, hwif->config_data+3); + local_irq_restore(flags); + + if ((reg & 0x10)) + /* legacy mode */ + hwif->irq = hwif->channel ? 15 : 14; + else if (!hwif->irq && hwif->mate && hwif->mate->irq) + /* sharing IRQ with mate */ + hwif->irq = hwif->mate->irq; + + ide_setup_dma(hwif, (hwif->config_data + 4) ^ (hwif->channel ? 0x0080 : 0x0000), 3); + +#ifdef CONFIG_BLK_DEV_IDEDMA + hwif->dma_setup = &trm290_ide_dma_setup; + hwif->dma_exec_cmd = &trm290_ide_dma_exec_cmd; + hwif->dma_start = &trm290_ide_dma_start; + hwif->ide_dma_end = &trm290_ide_dma_end; + hwif->ide_dma_test_irq = &trm290_ide_dma_test_irq; +#endif /* CONFIG_BLK_DEV_IDEDMA */ + + hwif->selectproc = &trm290_selectproc; + hwif->autodma = 0; /* play it safe for now */ + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; +#if 1 + { + /* + * My trm290-based card doesn't seem to work with all possible values + * for the control basereg, so this kludge ensures that we use only + * values that are known to work. Ugh. -ml + */ + u16 new, old, compat = hwif->channel ? 0x374 : 0x3f4; + static u16 next_offset = 0; + u8 old_mask; + + hwif->OUTB(0x54|(hwif->channel<<3), hwif->config_data+1); + old = hwif->INW(hwif->config_data); + old &= ~1; + old_mask = hwif->INB(old+2); + if (old != compat && old_mask == 0xff) { + /* leave lower 10 bits untouched */ + compat += (next_offset += 0x400); + hwif->io_ports[IDE_CONTROL_OFFSET] = compat + 2; + hwif->OUTW(compat|1, hwif->config_data); + new = hwif->INW(hwif->config_data); + printk(KERN_INFO "%s: control basereg workaround: " + "old=0x%04x, new=0x%04x\n", + hwif->name, old, new & ~1); + } + } +#endif +} + +static ide_pci_device_t trm290_chipset __devinitdata = { + .name = "TRM290", + .init_hwif = init_hwif_trm290, + .channels = 2, + .autodma = NOAUTODMA, + .bootable = ON_BOARD, +}; + +static int __devinit trm290_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + return ide_setup_pci_device(dev, &trm290_chipset); +} + +static struct pci_device_id trm290_pci_tbl[] = { + { PCI_VENDOR_ID_TEKRAM, PCI_DEVICE_ID_TEKRAM_DC290, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, trm290_pci_tbl); + +static struct pci_driver driver = { + .name = "TRM290_IDE", + .id_table = trm290_pci_tbl, + .probe = trm290_init_one, +}; + +static int trm290_ide_init(void) +{ + return ide_pci_register_driver(&driver); +} + +module_init(trm290_ide_init); + +MODULE_AUTHOR("Mark Lord"); +MODULE_DESCRIPTION("PCI driver module for Tekram TRM290 IDE"); +MODULE_LICENSE("GPL"); |