aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/ppc/pmac.c
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-10-13 17:47:50 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-10-13 17:47:50 +0200
commitaedea5910ce44fea79e2c517bb22e0006372156f (patch)
tree5e9c84f0c045058594a80a2bc67b358f80d1d884 /drivers/ide/ppc/pmac.c
parent3b2d0093b8eb2b0b4adc86138edee9f6d376cafb (diff)
ide-pmac: remove pmac_ide_do_setfeature() (take 2)
Use ide_config_drive_speed() instead of pmac_ide_do_setfeature() and remove the latter, also ide-iops.c::__ide_wait_stat() could be static again. Since for IDE PMAC host driver IDE_CONTROL_REG is always true, device's ->quirk_list is always zero and ->ide_dma_host_{on,off} are nops than the only changes in behavior are: * if PIO mode is set then ->dma_off_queitly is called to disable DMA * if setting transfer mode fails ide_dump_status() is called to dump status v2: * IDE PMAC controllers allow separate PIO and DMA timings and PPC userland depends on this fact, and calls "hdparm -p" without calling "hdparm -d". Therefore to compensate for DMA being disabled by ide_config_drive_speed() for PIO modes: - add IDE_HFLAG_SET_PIO_MODE_KEEP_DMA flag and set it in PMAC host driver - add handling of the new flag to ide-io.c::do_special() Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/ppc/pmac.c')
-rw-r--r--drivers/ide/ppc/pmac.c80
1 files changed, 3 insertions, 77 deletions
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index c68e2472345..24f73291c4d 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -530,81 +530,6 @@ pmac_outbsync(ide_drive_t *drive, u8 value, unsigned long port)
}
/*
- * Send the SET_FEATURE IDE command to the drive and update drive->id with
- * the new state. We currently don't use the generic routine as it used to
- * cause various trouble, especially with older mediabays.
- * This code is sometimes triggering a spurrious interrupt though, I need
- * to sort that out sooner or later and see if I can finally get the
- * common version to work properly in all cases
- */
-static int
-pmac_ide_do_setfeature(ide_drive_t *drive, u8 command)
-{
- ide_hwif_t *hwif = HWIF(drive);
- int result;
- u8 stat;
-
- disable_irq_nosync(hwif->irq);
- udelay(1);
- SELECT_DRIVE(drive);
- SELECT_MASK(drive, 0);
- udelay(1);
- hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG);
- hwif->OUTB(command, IDE_NSECTOR_REG);
- hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG);
- hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
- result = __ide_wait_stat(drive, drive->ready_stat,
- BUSY_STAT|DRQ_STAT|ERR_STAT,
- WAIT_CMD, &stat);
- if (result)
- printk(KERN_ERR "%s: pmac_ide_do_setfeature disk not ready "
- "after SET_FEATURE !\n", drive->name);
-
- SELECT_MASK(drive, 0);
- if (result == 0) {
- drive->id->dma_ultra &= ~0xFF00;
- drive->id->dma_mword &= ~0x0F00;
- drive->id->dma_1word &= ~0x0F00;
- switch(command) {
- case XFER_UDMA_7:
- drive->id->dma_ultra |= 0x8080; break;
- case XFER_UDMA_6:
- drive->id->dma_ultra |= 0x4040; break;
- case XFER_UDMA_5:
- drive->id->dma_ultra |= 0x2020; break;
- case XFER_UDMA_4:
- drive->id->dma_ultra |= 0x1010; break;
- case XFER_UDMA_3:
- drive->id->dma_ultra |= 0x0808; break;
- case XFER_UDMA_2:
- drive->id->dma_ultra |= 0x0404; break;
- case XFER_UDMA_1:
- drive->id->dma_ultra |= 0x0202; break;
- case XFER_UDMA_0:
- drive->id->dma_ultra |= 0x0101; break;
- case XFER_MW_DMA_2:
- drive->id->dma_mword |= 0x0404; break;
- case XFER_MW_DMA_1:
- drive->id->dma_mword |= 0x0202; break;
- case XFER_MW_DMA_0:
- drive->id->dma_mword |= 0x0101; break;
- case XFER_SW_DMA_2:
- drive->id->dma_1word |= 0x0404; break;
- case XFER_SW_DMA_1:
- drive->id->dma_1word |= 0x0202; break;
- case XFER_SW_DMA_0:
- drive->id->dma_1word |= 0x0101; break;
- default: break;
- }
- if (!drive->init_speed)
- drive->init_speed = command;
- drive->current_speed = command;
- }
- enable_irq(hwif->irq);
- return result;
-}
-
-/*
* Old tuning functions (called on hdparm -p), sets up drive PIO timings
*/
static void
@@ -685,7 +610,7 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
drive->name, pio, *timings);
#endif
- if (pmac_ide_do_setfeature(drive, XFER_PIO_0 + pio))
+ if (ide_config_drive_speed(drive, XFER_PIO_0 + pio))
return;
pmac_ide_do_update_timings(drive);
@@ -948,7 +873,7 @@ static int pmac_ide_tune_chipset(ide_drive_t *drive, const u8 speed)
if (ret)
return ret;
- ret = pmac_ide_do_setfeature(drive, speed);
+ ret = ide_config_drive_speed(drive, speed);
if (ret)
return ret;
@@ -1218,6 +1143,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
hwif->drives[0].unmask = 1;
hwif->drives[1].unmask = 1;
+ hwif->host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA;
hwif->pio_mask = ATA_PIO4;
hwif->set_pio_mode = pmac_ide_set_pio_mode;
if (pmif->kind == controller_un_ata6