aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide
diff options
context:
space:
mode:
authorSergei Shtylyov <sshtylyov@ru.mvista.com>2007-07-03 22:28:35 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-07-03 22:28:35 +0200
commit96dcc08b0c6b730474469b10ed5eeda06e617deb (patch)
tree524e9bfe6800a7f6ce42d618d9c450359ac76da9 /drivers/ide
parent783353b1d3d1ed3ae4a0bd4ea4557bd4d77aa04e (diff)
hpt366: use correct enablebits for HPT36x
The HPT36x chips finally turned out to have the channel enable bits -- however, badly implemented. Make use of them despite it's probably only going to burden the driver's code -- assuming both channels are always enabled by the HighPoint BIOS anyway... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Linas Vepstas <linas@austin.ibm.com> Cc: michal.kepien@poczta.onet.pl Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide')
-rw-r--r--drivers/ide/pci/hpt366.c20
1 files changed, 15 insertions, 5 deletions
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 4f8017ac990..c33d0b0f11c 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/hpt366.c Version 1.05 Jun 26, 2007
+ * linux/drivers/ide/pci/hpt366.c Version 1.06 Jun 27, 2007
*
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
@@ -1514,18 +1514,28 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
goto init_single;
/*
- * HPT36x chips are single channel and
- * do not seem to have the channel enable bit...
+ * HPT36x chips have one channel per function and have
+ * both channel enable bits located differently and visible
+ * to both functions -- really stupid design decision... :-(
+ * Bit 4 is for the primary channel, bit 5 for the secondary.
*/
d->channels = 1;
- d->enablebits[0].reg = 0;
+ d->enablebits[0].mask = d->enablebits[0].val = 0x10;
if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) {
- u8 pin1 = 0, pin2 = 0;
+ u8 mcr1 = 0, pin1 = 0, pin2 = 0;
int ret;
pci_set_drvdata(dev2, info[rev]);
+ /*
+ * Now we'll have to force both channels enabled if
+ * at least one of them has been enabled by BIOS...
+ */
+ pci_read_config_byte(dev, 0x50, &mcr1);
+ if (mcr1 & 0x30)
+ pci_write_config_byte(dev, 0x50, mcr1 | 0x30);
+
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1);
pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);
if (pin1 != pin2 && dev->irq == dev2->irq) {