IB/ehca: Add "port connection autodetect mode"

This patch enhances ehca with a capability to "autodetect" the ports
being connected physically. In order to utilize that function the
module option nr_ports must be set to -1 (default is 2 - two
ports). This feature is experimental and will made the default later.

More detail:

If the user connects only one port to the switch, current code requires
  1) port one to be connected and
  2) module option nr_ports=1 to be given.

If autodetect is enabled, ehca will not wait at creation of the GSI QP
for the respective port to become active. Since firmware does not
accept modify_qp() while the port is down at initialization, we need
to cache all calls to modify_qp() for the SMI/GSI QP and just return a
good return code.

When a port is activated and we get a PORT_ACTIVE event, we replay the
cached modify-qp() parms and re-trigger any posted recv WRs. Only then
do we forward the PORT_ACTIVE event to registered clients.

The result of this autodetect patch is that all ports will be
accessible by the users. Depending on their respective cabling only
those ports that are connected properly will become operable. If a
user tries to modify a regular QP of a non-connected port, modify_qp()
will fail. Furthermore, ibv_devinfo should show the port state
accordingly.

Note that this patch primarily improves the loading behaviour of
ehca. If the cable is removed while the driver is operating and
plugged in again, firmware will handle that properly by sending an
appropriate async event.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

1 files changed, 21 insertions, 5 deletions

diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c
index 4c734ecef11..863b34fa9ff 100644
--- a/drivers/infiniband/hw/ehca/ehca_irq.c
+++ b/drivers/infiniband/hw/ehca/ehca_irq.c
@@ -356,17 +356,33 @@ static void parse_ec(struct ehca_shca *shca, u64 eqe)
 	u8 ec   = EHCA_BMASK_GET(NEQE_EVENT_CODE, eqe);
 	u8 port = EHCA_BMASK_GET(NEQE_PORT_NUMBER, eqe);
 	u8 spec_event;
+	struct ehca_sport *sport = &shca->sport[port - 1];
+	unsigned long flags;
 
 	switch (ec) {
 	case 0x30: /* port availability change */
 		if (EHCA_BMASK_GET(NEQE_PORT_AVAILABILITY, eqe)) {
-			shca->sport[port - 1].port_state = IB_PORT_ACTIVE;
+			int suppress_event;
+			/* replay modify_qp for sqps */
+			spin_lock_irqsave(&sport->mod_sqp_lock, flags);
+			suppress_event = !sport->ibqp_sqp[IB_QPT_GSI];
+			if (sport->ibqp_sqp[IB_QPT_SMI])
+				ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]);
+			if (!suppress_event)
+				ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]);
+			spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
+
+			/* AQP1 was destroyed, ignore this event */
+			if (suppress_event)
+				break;
+
+			sport->port_state = IB_PORT_ACTIVE;
 			dispatch_port_event(shca, port, IB_EVENT_PORT_ACTIVE,
 					    "is active");
 			ehca_query_sma_attr(shca, port,
-					    &shca->sport[port - 1].saved_attr);
+					    &sport->saved_attr);
 		} else {
-			shca->sport[port - 1].port_state = IB_PORT_DOWN;
+			sport->port_state = IB_PORT_DOWN;
 			dispatch_port_event(shca, port, IB_EVENT_PORT_ERR,
 					    "is inactive");
 		}
@@ -380,11 +396,11 @@ static void parse_ec(struct ehca_shca *shca, u64 eqe)
 			ehca_warn(&shca->ib_device, "disruptive port "
 				  "%d configuration change", port);
 
-			shca->sport[port - 1].port_state = IB_PORT_DOWN;
+			sport->port_state = IB_PORT_DOWN;
 			dispatch_port_event(shca, port, IB_EVENT_PORT_ERR,
 					    "is inactive");
 
-			shca->sport[port - 1].port_state = IB_PORT_ACTIVE;
+			sport->port_state = IB_PORT_ACTIVE;
 			dispatch_port_event(shca, port, IB_EVENT_PORT_ACTIVE,
 					    "is active");
 		} else