aboutsummaryrefslogtreecommitdiff
path: root/drivers/input
diff options
context:
space:
mode:
authorWan ZongShun <mcuos.com@gmail.com>2009-06-10 23:27:22 -0700
committerDmitry Torokhov <dmitry.torokhov@gmail.com>2009-06-11 02:03:39 -0700
commit7e3f73754e489e8c7742eaba15b608757b5bbb28 (patch)
tree88a5910cb5aa11bc6e7515baa479d6b3b4296a87 /drivers/input
parent4894e4aca82aca927d0404ce61f021f790de4b1e (diff)
Input: add support for touchscreen on W90P910 ARM platform
The touchscreen works in two modes, wait trigger mode and auto-semi mode. The device starts in wait trigger mode and waits until pressure is detected, then device sets WT_INT bit and raises an interrupt. The driver should put the device into auto-semi mode and prepare for reading first X and then Y coordinates. When coordinate data is ready the driver sets ADC_INT bit and raises interrupt again. [dtor@mail.ru: various cleanups] Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/touchscreen/Kconfig8
-rw-r--r--drivers/input/touchscreen/Makefile1
-rw-r--r--drivers/input/touchscreen/w90p910_ts.c350
3 files changed, 359 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 1b4a1675cbc..72e2712c7e2 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -490,4 +490,12 @@ config TOUCHSCREEN_TSC2007
To compile this driver as a module, choose M here: the
module will be called tsc2007.
+config TOUCHSCREEN_W90X900
+ tristate "W90P910 touchscreen driver"
+ help
+ Say Y here if you have a W90P910 based touchscreen.
+
+ To compile this driver as a module, choose M here: the
+ module will be called w90p910_ts.
+
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 10e0be6cea4..3e1c5e0b952 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -39,3 +39,4 @@ wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
+obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
new file mode 100644
index 00000000000..6071f588257
--- /dev/null
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -0,0 +1,350 @@
+/*
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+
+/* ADC controller bit defines */
+#define ADC_DELAY 0xf00
+#define ADC_DOWN 0x01
+#define ADC_TSC_Y (0x01 << 8)
+#define ADC_TSC_X (0x00 << 8)
+#define TSC_FOURWIRE (~(0x03 << 1))
+#define ADC_CLK_EN (0x01 << 28) /* ADC clock enable */
+#define ADC_READ_CON (0x01 << 12)
+#define ADC_CONV (0x01 << 13)
+#define ADC_SEMIAUTO (0x01 << 14)
+#define ADC_WAITTRIG (0x03 << 14)
+#define ADC_RST1 (0x01 << 16)
+#define ADC_RST0 (0x00 << 16)
+#define ADC_EN (0x01 << 17)
+#define ADC_INT (0x01 << 18)
+#define WT_INT (0x01 << 20)
+#define ADC_INT_EN (0x01 << 21)
+#define LVD_INT_EN (0x01 << 22)
+#define WT_INT_EN (0x01 << 23)
+#define ADC_DIV (0x04 << 1) /* div = 6 */
+
+enum ts_state {
+ TS_WAIT_NEW_PACKET, /* We are waiting next touch report */
+ TS_WAIT_X_COORD, /* We are waiting for ADC to report X coord */
+ TS_WAIT_Y_COORD, /* We are waiting for ADC to report Y coord */
+ TS_IDLE, /* Input device is closed, don't do anything */
+};
+
+struct w90p910_ts {
+ struct input_dev *input;
+ struct timer_list timer;
+ int irq_num;
+ void __iomem *clocken;
+ void __iomem *ts_reg;
+ spinlock_t lock;
+ enum ts_state state;
+};
+
+static void w90p910_report_event(struct w90p910_ts *w90p910_ts, bool down)
+{
+ struct input_dev *dev = w90p910_ts->input;
+
+ if (down) {
+ input_report_abs(dev, ABS_X,
+ __raw_readl(w90p910_ts->ts_reg + 0x0c));
+ input_report_abs(dev, ABS_Y,
+ __raw_readl(w90p910_ts->ts_reg + 0x10));
+ }
+
+ input_report_key(dev, BTN_TOUCH, down);
+ input_sync(dev);
+}
+
+static void w90p910_prepare_x_reading(struct w90p910_ts *w90p910_ts)
+{
+ unsigned long ctlreg;
+
+ __raw_writel(ADC_TSC_X, w90p910_ts->ts_reg + 0x04);
+ ctlreg = __raw_readl(w90p910_ts->ts_reg);
+ ctlreg &= ~(ADC_WAITTRIG | WT_INT | WT_INT_EN);
+ ctlreg |= ADC_SEMIAUTO | ADC_INT_EN | ADC_CONV;
+ __raw_writel(ctlreg, w90p910_ts->ts_reg);
+
+ w90p910_ts->state = TS_WAIT_X_COORD;
+}
+
+static void w90p910_prepare_y_reading(struct w90p910_ts *w90p910_ts)
+{
+ unsigned long ctlreg;
+
+ __raw_writel(ADC_TSC_Y, w90p910_ts->ts_reg + 0x04);
+ ctlreg = __raw_readl(w90p910_ts->ts_reg);
+ ctlreg &= ~(ADC_WAITTRIG | ADC_INT | WT_INT_EN);
+ ctlreg |= ADC_SEMIAUTO | ADC_INT_EN | ADC_CONV;
+ __raw_writel(ctlreg, w90p910_ts->ts_reg);
+
+ w90p910_ts->state = TS_WAIT_Y_COORD;
+}
+
+static void w90p910_prepare_next_packet(struct w90p910_ts *w90p910_ts)
+{
+ unsigned long ctlreg;
+
+ ctlreg = __raw_readl(w90p910_ts->ts_reg);
+ ctlreg &= ~(ADC_INT | ADC_INT_EN | ADC_SEMIAUTO | ADC_CONV);
+ ctlreg |= ADC_WAITTRIG | WT_INT_EN;
+ __raw_writel(ctlreg, w90p910_ts->ts_reg);
+
+ w90p910_ts->state = TS_WAIT_NEW_PACKET;
+}
+
+static irqreturn_t w90p910_ts_interrupt(int irq, void *dev_id)
+{
+ struct w90p910_ts *w90p910_ts = dev_id;
+ unsigned long flags;
+
+ spin_lock_irqsave(&w90p910_ts->lock, flags);
+
+ switch (w90p910_ts->state) {
+ case TS_WAIT_NEW_PACKET:
+ /*
+ * The controller only generates interrupts when pen
+ * is down.
+ */
+ del_timer(&w90p910_ts->timer);
+ w90p910_prepare_x_reading(w90p910_ts);
+ break;
+
+
+ case TS_WAIT_X_COORD:
+ w90p910_prepare_y_reading(w90p910_ts);
+ break;
+
+ case TS_WAIT_Y_COORD:
+ w90p910_report_event(w90p910_ts, true);
+ w90p910_prepare_next_packet(w90p910_ts);
+ mod_timer(&w90p910_ts->timer, jiffies + msecs_to_jiffies(100));
+ break;
+
+ case TS_IDLE:
+ break;
+ }
+
+ spin_unlock_irqrestore(&w90p910_ts->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static void w90p910_check_pen_up(unsigned long data)
+{
+ struct w90p910_ts *w90p910_ts = (struct w90p910_ts *) data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&w90p910_ts->lock, flags);
+
+ if (w90p910_ts->state == TS_WAIT_NEW_PACKET &&
+ !(__raw_readl(w90p910_ts->ts_reg + 0x04) & ADC_DOWN)) {
+
+ w90p910_report_event(w90p910_ts, false);
+ }
+
+ spin_unlock_irqrestore(&w90p910_ts->lock, flags);
+}
+
+static int w90p910_open(struct input_dev *dev)
+{
+ struct w90p910_ts *w90p910_ts = input_get_drvdata(dev);
+ unsigned long val;
+
+ /* enable the ADC clock */
+ val = __raw_readl(w90p910_ts->clocken);
+ __raw_writel(val | ADC_CLK_EN, w90p910_ts->clocken);
+
+ __raw_writel(ADC_RST1, w90p910_ts->ts_reg);
+ msleep(1);
+ __raw_writel(ADC_RST0, w90p910_ts->ts_reg);
+ msleep(1);
+
+ /* set delay and screen type */
+ val = __raw_readl(w90p910_ts->ts_reg + 0x04);
+ __raw_writel(val & TSC_FOURWIRE, w90p910_ts->ts_reg + 0x04);
+ __raw_writel(ADC_DELAY, w90p910_ts->ts_reg + 0x08);
+
+ w90p910_ts->state = TS_WAIT_NEW_PACKET;
+ wmb();
+
+ /* set trigger mode */
+ val = __raw_readl(w90p910_ts->ts_reg);
+ val |= ADC_WAITTRIG | ADC_DIV | ADC_EN | WT_INT_EN;
+ __raw_writel(val, w90p910_ts->ts_reg);
+
+ return 0;
+}
+
+static void w90p910_close(struct input_dev *dev)
+{
+ struct w90p910_ts *w90p910_ts = input_get_drvdata(dev);
+ unsigned long val;
+
+ /* disable trigger mode */
+
+ spin_lock_irq(&w90p910_ts->lock);
+
+ w90p910_ts->state = TS_IDLE;
+
+ val = __raw_readl(w90p910_ts->ts_reg);
+ val &= ~(ADC_WAITTRIG | ADC_DIV | ADC_EN | WT_INT_EN | ADC_INT_EN);
+ __raw_writel(val, w90p910_ts->ts_reg);
+
+ spin_unlock_irq(&w90p910_ts->lock);
+
+ /* Now that interrupts are shut off we can safely delete timer */
+ del_timer_sync(&w90p910_ts->timer);
+
+ /* stop the ADC clock */
+ val = __raw_readl(w90p910_ts->clocken);
+ __raw_writel(val & ~ADC_CLK_EN, w90p910_ts->clocken);
+}
+
+static int __devinit w90x900ts_probe(struct platform_device *pdev)
+{
+ struct w90p910_ts *w90p910_ts;
+ struct input_dev *input_dev;
+ struct resource *res;
+ int err;
+
+ w90p910_ts = kzalloc(sizeof(struct w90p910_ts), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!w90p910_ts || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
+
+ w90p910_ts->input = input_dev;
+ w90p910_ts->state = TS_IDLE;
+ spin_lock_init(&w90p910_ts->lock);
+ setup_timer(&w90p910_ts->timer, w90p910_check_pen_up,
+ (unsigned long)&w90p910_ts);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ err = -ENXIO;
+ goto fail1;
+ }
+
+ if (!request_mem_region(res->start, res->end - res->start + 1,
+ pdev->name)) {
+ err = -EBUSY;
+ goto fail1;
+ }
+
+ w90p910_ts->ts_reg = ioremap(res->start, res->end - res->start + 1);
+ if (!w90p910_ts->ts_reg) {
+ err = -ENOMEM;
+ goto fail2;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ err = -ENXIO;
+ goto fail3;
+ }
+
+ w90p910_ts->clocken = (void __iomem *)res->start;
+
+ input_dev->name = "W90P910 TouchScreen";
+ input_dev->phys = "w90p910ts/event0";
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0x0005;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->dev.parent = &pdev->dev;
+ input_dev->open = w90p910_open;
+ input_dev->close = w90p910_close;
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ input_set_abs_params(input_dev, ABS_X, 0, 0x400, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 0x400, 0, 0);
+
+ input_set_drvdata(input_dev, w90p910_ts);
+
+ w90p910_ts->irq_num = platform_get_irq(pdev, 0);
+ if (request_irq(w90p910_ts->irq_num, w90p910_ts_interrupt,
+ IRQF_DISABLED, "w90p910ts", w90p910_ts)) {
+ err = -EBUSY;
+ goto fail3;
+ }
+
+ err = input_register_device(w90p910_ts->input);
+ if (err)
+ goto fail4;
+
+ platform_set_drvdata(pdev, w90p910_ts);
+
+ return 0;
+
+fail4: free_irq(w90p910_ts->irq_num, w90p910_ts);
+fail3: iounmap(w90p910_ts->ts_reg);
+fail2: release_mem_region(res->start, res->end - res->start + 1);
+fail1: input_free_device(input_dev);
+ kfree(w90p910_ts);
+ return err;
+}
+
+static int __devexit w90x900ts_remove(struct platform_device *pdev)
+{
+ struct w90p910_ts *w90p910_ts = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ free_irq(w90p910_ts->irq_num, w90p910_ts);
+ del_timer_sync(&w90p910_ts->timer);
+ iounmap(w90p910_ts->ts_reg);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ input_unregister_device(w90p910_ts->input);
+ kfree(w90p910_ts);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver w90x900ts_driver = {
+ .probe = w90x900ts_probe,
+ .remove = __devexit_p(w90x900ts_remove),
+ .driver = {
+ .name = "w90x900-ts",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init w90x900ts_init(void)
+{
+ return platform_driver_register(&w90x900ts_driver);
+}
+
+static void __exit w90x900ts_exit(void)
+{
+ platform_driver_unregister(&w90x900ts_driver);
+}
+
+module_init(w90x900ts_init);
+module_exit(w90x900ts_exit);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("w90p910 touch screen driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:w90p910-ts");