V4L/DVB (4029): [PATCH] Genpix 8PSK->USB driver (Take 2)

This is a patch which includes support for the GENPIX 8PSK->USB module.  The
board supports QPSK, BPSK and 8PSK decoding (though I don't think it will be
DVB-S2 compliant) With the following patch, the boad is equivalent to a budget
card (no CA Module)
The patch which adds 8psk suppot will follow, but is seperate, as it requires
DVB-S2 support
More info on the board can be found at www.genpix-electronics.com (and they
host the requisite firmwares there as well)
Signed off by: Alan Nisota <alannisota@gmail.com>

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

6 files changed, 620 insertions, 1 deletions

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index e388fb1567d..5350e963c17 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -130,6 +130,15 @@ config DVB_USB_VP702X
 
 	  DVB-S USB2.0 receivers.
 
+config DVB_USB_GP8PSK
+	tristate "GENPIX 8PSK->USB module support"
+	depends on DVB_USB
+	help
+	  Say Y here to support the
+	    GENPIX 8psk module
+
+	  DVB-S USB2.0 receivers.
+
 config DVB_USB_NOVA_T_USB2
 	tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
 	depends on DVB_USB
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index 2dc9aad9681..9643f56c7fe 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -7,6 +7,9 @@ obj-$(CONFIG_DVB_USB_VP7045) += dvb-usb-vp7045.o
 dvb-usb-vp702x-objs = vp702x.o vp702x-fe.o
 obj-$(CONFIG_DVB_USB_VP702X) += dvb-usb-vp702x.o
 
+dvb-usb-gp8psk-objs = gp8psk.o gp8psk-fe.o
+obj-$(CONFIG_DVB_USB_GP8PSK) += dvb-usb-gp8psk.o
+
 dvb-usb-dtt200u-objs = dtt200u.o dtt200u-fe.o
 obj-$(CONFIG_DVB_USB_DTT200U) += dvb-usb-dtt200u.o
 
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index cb239049b09..95698918bc1 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -31,6 +31,7 @@
 #define USB_VID_VISIONPLUS					0x13d3
 #define USB_VID_TWINHAN						0x1822
 #define USB_VID_ULTIMA_ELECTRONIC			0x05d8
+#define USB_VID_GENPIX					0x09c0
 
 /* Product IDs */
 #define USB_PID_ADSTECH_USB2_COLD			0xa333
@@ -104,5 +105,6 @@
 #define USB_PID_KYE_DVB_T_WARM				0x701f
 #define USB_PID_PCTV_200E					0x020e
 #define USB_PID_PCTV_400E					0x020f
-
+#define USB_PID_GENPIX_8PSK_COLD				0x0200
+#define USB_PID_GENPIX_8PSK_WARM				0x0201
 #endif
diff --git a/drivers/media/dvb/dvb-usb/gp8psk-fe.c b/drivers/media/dvb/dvb-usb/gp8psk-fe.c
new file mode 100644
index 00000000000..6ccbdc9cd77
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/gp8psk-fe.c
@@ -0,0 +1,272 @@
+/* DVB USB compliant Linux driver for the
+ *  - GENPIX 8pks/qpsk USB2.0 DVB-S module
+ *
+ * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
+ *
+ * Thanks to GENPIX for the sample code used to implement this module.
+ *
+ * This module is based off the vp7045 and vp702x modules
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the Free
+ *	Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include "gp8psk.h"
+
+struct gp8psk_fe_state {
+	struct dvb_frontend fe;
+
+	struct dvb_usb_device *d;
+
+	u16 snr;
+
+	unsigned long next_snr_check;
+};
+
+static int gp8psk_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
+{
+	struct gp8psk_fe_state *st = fe->demodulator_priv;
+	u8 lock;
+
+	if (gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0, 0, &lock,1))
+		return -EINVAL;
+
+	if (lock)
+		*status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER;
+	else
+		*status = 0;
+
+	return 0;
+}
+
+/* not supported by this Frontend */
+static int gp8psk_fe_read_ber(struct dvb_frontend* fe, u32 *ber)
+{
+	(void) fe;
+	*ber = 0;
+	return 0;
+}
+
+/* not supported by this Frontend */
+static int gp8psk_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
+{
+	(void) fe;
+	*unc = 0;
+	return 0;
+}
+
+static int gp8psk_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
+{
+	struct gp8psk_fe_state *st = fe->demodulator_priv;
+	u8 buf[2];
+
+	if (time_after(jiffies,st->next_snr_check)) {
+		gp8psk_usb_in_op(st->d,GET_SIGNAL_STRENGTH,0,0,buf,2);
+		*snr = (int)(buf[1]) << 8 | buf[0];
+		/* snr is reported in dBu*256 */
+		/* snr / 38.4 ~= 100% strength */
+		/* snr * 17 returns 100% strength as 65535 */
+		if (*snr <= 3855)
+			*snr = (*snr<<4) + *snr; // snr * 17
+		else
+			*snr = 65535;
+		st->next_snr_check = jiffies + (10*HZ)/1000;
+	} else {
+		*snr = st->snr;
+	}
+	return 0;
+}
+
+static int gp8psk_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
+{
+	return gp8psk_fe_read_snr(fe, strength);
+}
+
+static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
+{
+	tune->min_delay_ms = 800;
+	return 0;
+}
+
+static int gp8psk_fe_set_frontend(struct dvb_frontend* fe,
+				  struct dvb_frontend_parameters *fep)
+{
+	struct gp8psk_fe_state *state = fe->demodulator_priv;
+	u8 cmd[10];
+	u32 freq = fep->frequency * 1000;
+
+	cmd[4] = freq         & 0xff;
+	cmd[5] = (freq >> 8)  & 0xff;
+	cmd[6] = (freq >> 16) & 0xff;
+	cmd[7] = (freq >> 24) & 0xff;
+
+	switch(fe->ops.info.type) {
+	case FE_QPSK:
+		cmd[0] =  fep->u.qpsk.symbol_rate        & 0xff;
+		cmd[1] = (fep->u.qpsk.symbol_rate >>  8) & 0xff;
+		cmd[2] = (fep->u.qpsk.symbol_rate >> 16) & 0xff;
+		cmd[3] = (fep->u.qpsk.symbol_rate >> 24) & 0xff;
+		cmd[8] = ADV_MOD_DVB_QPSK;
+		cmd[9] = 0x03; /*ADV_MOD_FEC_XXX*/
+		break;
+	default:
+		// other modes are unsuported right now
+		cmd[0] = 0;
+		cmd[1] = 0;
+		cmd[2] = 0;
+		cmd[3] = 0;
+		cmd[8] = 0;
+		cmd[9] = 0;
+		break;
+	}
+
+	gp8psk_usb_out_op(state->d,TUNE_8PSK,0,0,cmd,10);
+
+	state->next_snr_check = jiffies;
+
+	return 0;
+}
+
+static int gp8psk_fe_get_frontend(struct dvb_frontend* fe,
+				  struct dvb_frontend_parameters *fep)
+{
+	return 0;
+}
+
+
+static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe,
+				    struct dvb_diseqc_master_cmd *m)
+{
+	struct gp8psk_fe_state *st = fe->demodulator_priv;
+
+	deb_fe("%s\n",__FUNCTION__);
+
+	if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, m->msg[0], 0,
+			m->msg, m->msg_len)) {
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int gp8psk_fe_send_diseqc_burst (struct dvb_frontend* fe,
+				    fe_sec_mini_cmd_t burst)
+{
+	struct gp8psk_fe_state *st = fe->demodulator_priv;
+	u8 cmd;
+
+	deb_fe("%s\n",__FUNCTION__);
+
+	/* These commands are certainly wrong */
+	cmd = (burst == SEC_MINI_A) ? 0x00 : 0x01;
+
+	if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, cmd, 0,
+			&cmd, 0)) {
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int gp8psk_fe_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+	struct gp8psk_fe_state* state = fe->demodulator_priv;
+
+	if (gp8psk_usb_out_op(state->d,SET_22KHZ_TONE,
+		 (tone == SEC_TONE_ON), 0, NULL, 0)) {
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int gp8psk_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
+{
+	struct gp8psk_fe_state* state = fe->demodulator_priv;
+
+	if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE,
+			 voltage == SEC_VOLTAGE_18, 0, NULL, 0)) {
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int gp8psk_fe_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long sw_cmd)
+{
+	struct gp8psk_fe_state* state = fe->demodulator_priv;
+	u8 cmd = sw_cmd & 0x7f;
+
+	if (gp8psk_usb_out_op(state->d,SET_DN_SWITCH, cmd, 0,
+			NULL, 0)) {
+		return -EINVAL;
+	}
+	if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, !!(sw_cmd & 0x80),
+			0, NULL, 0)) {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void gp8psk_fe_release(struct dvb_frontend* fe)
+{
+	struct gp8psk_fe_state *state = fe->demodulator_priv;
+	kfree(state);
+}
+
+static struct dvb_frontend_ops gp8psk_fe_ops;
+
+struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d)
+{
+	struct gp8psk_fe_state *s = kzalloc(sizeof(struct gp8psk_fe_state), GFP_KERNEL);
+	if (s == NULL)
+		goto error;
+
+	s->d = d;
+	memcpy(&s->fe.ops, &gp8psk_fe_ops, sizeof(struct dvb_frontend_ops));
+	s->fe.demodulator_priv = s;
+
+	goto success;
+error:
+	return NULL;
+success:
+	return &s->fe;
+}
+
+
+static struct dvb_frontend_ops gp8psk_fe_ops = {
+	.info = {
+		.name			= "Genpix 8psk-USB DVB-S",
+		.type			= FE_QPSK,
+		.frequency_min		= 950000,
+		.frequency_max		= 2150000,
+		.frequency_stepsize	= 100,
+		.symbol_rate_min        = 1000000,
+		.symbol_rate_max        = 45000000,
+		.symbol_rate_tolerance  = 500,  /* ppm */
+		.caps = FE_CAN_INVERSION_AUTO |
+				FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+				FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+				FE_CAN_QPSK
+	},
+
+	.release = gp8psk_fe_release,
+
+	.init = NULL,
+	.sleep = NULL,
+
+	.set_frontend = gp8psk_fe_set_frontend,
+	.get_frontend = gp8psk_fe_get_frontend,
+	.get_tune_settings = gp8psk_fe_get_tune_settings,
+
+	.read_status = gp8psk_fe_read_status,
+	.read_ber = gp8psk_fe_read_ber,
+	.read_signal_strength = gp8psk_fe_read_signal_strength,
+	.read_snr = gp8psk_fe_read_snr,
+	.read_ucblocks = gp8psk_fe_read_unc_blocks,
+
+	.diseqc_send_master_cmd = gp8psk_fe_send_diseqc_msg,
+	.diseqc_send_burst = gp8psk_fe_send_diseqc_burst,
+	.set_tone = gp8psk_fe_set_tone,
+	.set_voltage = gp8psk_fe_set_voltage,
+	.dishnetwork_send_legacy_command = gp8psk_fe_send_legacy_dish_cmd,
+};
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c
new file mode 100644
index 00000000000..d6771cbd262
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/gp8psk.c
@@ -0,0 +1,254 @@
+/* DVB USB compliant Linux driver for the
+ *  - GENPIX 8pks/qpsk USB2.0 DVB-S module
+ *
+ * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
+ *
+ * Thanks to GENPIX for the sample code used to implement this module.
+ *
+ * This module is based off the vp7045 and vp702x modules
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the Free
+ *	Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include "gp8psk.h"
+
+/* debug */
+static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw";
+int dvb_usb_gp8psk_debug;
+module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
+
+int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
+{
+	int ret = 0,try = 0;
+
+	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
+		return ret;
+
+	while (ret >= 0 && ret != blen && try < 3) {
+		ret = usb_control_msg(d->udev,
+			usb_rcvctrlpipe(d->udev,0),
+			req,
+			USB_TYPE_VENDOR | USB_DIR_IN,
+			value,index,b,blen,
+			2000);
+		deb_info("reading number %d (ret: %d)\n",try,ret);
+		try++;
+	}
+
+	if (ret < 0 || ret != blen) {
+		warn("usb in operation failed.");
+		ret = -EIO;
+	} else
+		ret = 0;
+
+	deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
+	debug_dump(b,blen,deb_xfer);
+
+	mutex_unlock(&d->usb_mutex);
+
+	return ret;
+}
+
+int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
+			     u16 index, u8 *b, int blen)
+{
+	int ret;
+
+	deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
+	debug_dump(b,blen,deb_xfer);
+
+	if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
+		return ret;
+
+	if (usb_control_msg(d->udev,
+			usb_sndctrlpipe(d->udev,0),
+			req,
+			USB_TYPE_VENDOR | USB_DIR_OUT,
+			value,index,b,blen,
+			2000) != blen) {
+		warn("usb out operation failed.");
+		ret = -EIO;
+	} else
+		ret = 0;
+	mutex_unlock(&d->usb_mutex);
+
+	return ret;
+}
+
+static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
+{
+	int ret;
+	const struct firmware *fw = NULL;
+	u8 *ptr, *buf;
+	if ((ret = request_firmware(&fw, bcm4500_firmware,
+					&d->udev->dev)) != 0) {
+		err("did not find the bcm4500 firmware file. (%s) "
+			"Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
+			bcm4500_firmware,ret);
+		return ret;
+	}
+
+	if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0)) {
+		release_firmware(fw);
+		return -EINVAL;
+	}
+
+	info("downloaidng bcm4500 firmware from file '%s'",bcm4500_firmware);
+
+	ptr = fw->data;
+	buf = (u8 *) kmalloc(512, GFP_KERNEL | GFP_DMA);
+
+	while (ptr[0] != 0xff) {
+		u16 buflen = ptr[0] + 4;
+		if (ptr + buflen >= fw->data + fw->size) {
+			err("failed to load bcm4500 firmware.");
+			release_firmware(fw);
+			kfree(buf);
+			return -EINVAL;
+		}
+		memcpy(buf, ptr, buflen);
+		if (dvb_usb_generic_write(d, buf, buflen)) {
+			err("failed to load bcm4500 firmware.");
+			release_firmware(fw);
+			kfree(buf);
+			return -EIO;
+		}
+		ptr += buflen;
+	}
+	release_firmware(fw);
+	kfree(buf);
+	return 0;
+}
+
+static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	u8 status, buf;
+	if (onoff) {
+		gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
+		if (! (status & 0x01))  /* started */
+			if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
+				return -EINVAL;
+
+		if (! (status & 0x02)) /* BCM4500 firmware loaded */
+			if(gp8psk_load_bcm4500fw(d))
+				return EINVAL;
+
+		if (! (status & 0x04)) /* LNB Power */
+			if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
+					&buf, 1))
+				return EINVAL;
+
+		/* Set DVB mode */
+		if(gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
+			return -EINVAL;
+		gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
+	} else {
+		/* Turn off LNB power */
+		if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
+			return EINVAL;
+		/* Turn off 8psk power */
+		if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
+			return -EINVAL;
+
+	}
+	return 0;
+}
+
+
+static int gp8psk_streaming_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	return gp8psk_usb_out_op(d, ARM_TRANSFER, onoff, 0 , NULL, 0);
+}
+
+static int gp8psk_frontend_attach(struct dvb_usb_device *d)
+{
+	d->fe = gp8psk_fe_attach(d);
+
+	return 0;
+}
+
+static struct dvb_usb_properties gp8psk_properties;
+
+static int gp8psk_usb_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	return dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL);
+}
+
+static struct usb_device_id gp8psk_usb_table [] = {
+	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_COLD) },
+	    { USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_WARM) },
+	    { 0 },
+};
+MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);
+
+static struct dvb_usb_properties gp8psk_properties = {
+	.caps = 0,
+
+	.usb_ctrl = CYPRESS_FX2,
+	.firmware = "dvb-usb-gp8psk-01.fw",
+
+	.streaming_ctrl   = gp8psk_streaming_ctrl,
+	.power_ctrl       = gp8psk_power_ctrl,
+	.frontend_attach  = gp8psk_frontend_attach,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+	/* parameter for the MPEG2-data transfer */
+	.urb = {
+		.type = DVB_USB_BULK,
+		.count = 7,
+		.endpoint = 0x82,
+		.u = {
+			.bulk = {
+				.buffersize = 8192,
+			}
+		}
+	},
+
+	.num_device_descs = 1,
+	.devices = {
+		{ .name = "Genpix 8PSK-USB DVB-S USB2.0 receiver",
+		  .cold_ids = { &gp8psk_usb_table[0], NULL },
+		  .warm_ids = { &gp8psk_usb_table[1], NULL },
+		},
+		{ 0 },
+	}
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver gp8psk_usb_driver = {
+	.name		= "dvb_usb_gp8psk",
+	.probe		= gp8psk_usb_probe,
+	.disconnect = dvb_usb_device_exit,
+	.id_table	= gp8psk_usb_table,
+};
+
+/* module stuff */
+static int __init gp8psk_usb_module_init(void)
+{
+	int result;
+	if ((result = usb_register(&gp8psk_usb_driver))) {
+		err("usb_register failed. (%d)",result);
+		return result;
+	}
+
+	return 0;
+}
+
+static void __exit gp8psk_usb_module_exit(void)
+{
+	/* deregister this driver from the USB subsystem */
+	usb_deregister(&gp8psk_usb_driver);
+}
+
+module_init(gp8psk_usb_module_init);
+module_exit(gp8psk_usb_module_exit);
+
+MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>");
+MODULE_DESCRIPTION("Driver for Genpix 8psk-USB DVB-S USB2.0");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/dvb/dvb-usb/gp8psk.h
new file mode 100644
index 00000000000..3eba7061011
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/gp8psk.h
@@ -0,0 +1,79 @@
+/* DVB USB compliant Linux driver for the
+ *  - GENPIX 8pks/qpsk USB2.0 DVB-S module
+ *
+ * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
+ *
+ * Thanks to GENPIX for the sample code used to implement this module.
+ *
+ * This module is based off the vp7045 and vp702x modules
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the Free
+ *	Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#ifndef _DVB_USB_GP8PSK_H_
+#define _DVB_USB_GP8PSK_H_
+
+#define DVB_USB_LOG_PREFIX "gp8psk"
+#include "dvb-usb.h"
+
+extern int dvb_usb_gp8psk_debug;
+#define deb_info(args...) dprintk(dvb_usb_gp8psk_debug,0x01,args)
+#define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args)
+#define deb_rc(args...)   dprintk(dvb_usb_gp8psk_debug,0x04,args)
+#define deb_fe(args...)   dprintk(dvb_usb_gp8psk_debug,0x08,args)
+/* gp8psk commands */
+
+/* Twinhan Vendor requests */
+#define TH_COMMAND_IN                     0xC0
+#define TH_COMMAND_OUT                    0xC1
+
+/* command bytes */
+#define GET_8PSK_CONFIG                 0x80
+#define SET_8PSK_CONFIG                 0x81
+#define ARM_TRANSFER                    0x85
+#define TUNE_8PSK                       0x86
+#define GET_SIGNAL_STRENGTH             0x87
+#define LOAD_BCM4500                    0x88
+#define BOOT_8PSK                       0x89
+#define START_INTERSIL                  0x8A
+#define SET_LNB_VOLTAGE                 0x8B
+#define SET_22KHZ_TONE                  0x8C
+#define SEND_DISEQC_COMMAND             0x8D
+#define SET_DVB_MODE                    0x8E
+#define SET_DN_SWITCH                   0x8F
+#define GET_SIGNAL_LOCK                 0x90
+
+/* Satellite modulation modes */
+#define ADV_MOD_DVB_QPSK 0     /* DVB-S QPSK */
+#define ADV_MOD_TURBO_QPSK 1   /* Turbo QPSK */
+#define ADV_MOD_TURBO_8PSK 2   /* Turbo 8PSK (also used for Trellis 8PSK) */
+#define ADV_MOD_TURBO_16QAM 3  /* Turbo 16QAM (also used for Trellis 8PSK) */
+
+#define ADV_MOD_DCII_C_QPSK 4  /* Digicipher II Combo */
+#define ADV_MOD_DCII_I_QPSK 5  /* Digicipher II I-stream */
+#define ADV_MOD_DCII_Q_QPSK 6  /* Digicipher II Q-stream */
+#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */
+#define ADV_MOD_DSS_QPSK 8     /* DSS (DIRECTV) QPSK */
+#define ADV_MOD_DVB_BPSK 9     /* DVB-S BPSK */
+
+#define GET_USB_SPEED                     0x07
+ #define USB_SPEED_LOW                    0
+ #define USB_SPEED_FULL                   1
+ #define USB_SPEED_HIGH                   2
+
+#define RESET_FX2                         0x13
+
+#define FW_VERSION_READ                   0x0B
+#define VENDOR_STRING_READ                0x0C
+#define PRODUCT_STRING_READ               0x0D
+#define FW_BCD_VERSION_READ               0x14
+
+extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d);
+extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
+extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
+			     u16 index, u8 *b, int blen);
+
+#endif