Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 467 insertions, 0 deletions

diff --git a/drivers/media/dvb/frontends/dib3000mb_priv.h b/drivers/media/dvb/frontends/dib3000mb_priv.h
new file mode 100644
index 00000000000..57e61aa5b07
--- /dev/null
+++ b/drivers/media/dvb/frontends/dib3000mb_priv.h
@@ -0,0 +1,467 @@
+/*
+ * dib3000mb_priv.h
+ *
+ * Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@desy.de)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ * for more information see dib3000mb.c .
+ */
+
+#ifndef __DIB3000MB_PRIV_H_INCLUDED__
+#define __DIB3000MB_PRIV_H_INCLUDED__
+
+/* register addresses and some of their default values */
+
+/* restart subsystems */
+#define DIB3000MB_REG_RESTART			(     0)
+
+#define DIB3000MB_RESTART_OFF			(     0)
+#define DIB3000MB_RESTART_AUTO_SEARCH		(1 << 1)
+#define DIB3000MB_RESTART_CTRL				(1 << 2)
+#define DIB3000MB_RESTART_AGC				(1 << 3)
+
+/* FFT size */
+#define DIB3000MB_REG_FFT				(     1)
+
+/* Guard time */
+#define DIB3000MB_REG_GUARD_TIME		(     2)
+
+/* QAM */
+#define DIB3000MB_REG_QAM				(     3)
+
+/* Alpha coefficient high priority Viterbi algorithm */
+#define DIB3000MB_REG_VIT_ALPHA			(     4)
+
+/* spectrum inversion */
+#define DIB3000MB_REG_DDS_INV			(     5)
+
+/* DDS frequency value (IF position) ad ? values don't match reg_3000mb.txt */
+#define DIB3000MB_REG_DDS_FREQ_MSB		(     6)
+#define DIB3000MB_REG_DDS_FREQ_LSB		(     7)
+#define DIB3000MB_DDS_FREQ_MSB				(   178)
+#define DIB3000MB_DDS_FREQ_LSB				(  8990)
+
+/* timing frequency (carrier spacing) */
+static u16 dib3000mb_reg_timing_freq[] = { 8,9 };
+static u16 dib3000mb_timing_freq[][2] = {
+	{ 126 , 48873 }, /* 6 MHz */
+	{ 147 , 57019 }, /* 7 MHz */
+	{ 168 , 65164 }, /* 8 MHz */
+};
+
+/* impulse noise parameter */
+/* 36 ??? */
+
+static u16 dib3000mb_reg_impulse_noise[] = { 10,11,12,15,36 };
+
+enum dib3000mb_impulse_noise_type {
+	DIB3000MB_IMPNOISE_OFF,
+	DIB3000MB_IMPNOISE_MOBILE,
+	DIB3000MB_IMPNOISE_FIXED,
+	DIB3000MB_IMPNOISE_DEFAULT
+};
+
+static u16 dib3000mb_impulse_noise_values[][5] = {
+	{ 0x0000, 0x0004, 0x0014, 0x01ff, 0x0399 }, /* off */
+	{ 0x0001, 0x0004, 0x0014, 0x01ff, 0x037b }, /* mobile */
+	{ 0x0001, 0x0004, 0x0020, 0x01bd, 0x0399 }, /* fixed */
+	{ 0x0000, 0x0002, 0x000a, 0x01ff, 0x0399 }, /* default */
+};
+
+/*
+ * Dual Automatic-Gain-Control
+ * - gains RF in tuner (AGC1)
+ * - gains IF after filtering (AGC2)
+ */
+
+/* also from 16 to 18 */
+static u16 dib3000mb_reg_agc_gain[] = {
+	19,20,21,22,23,24,25,26,27,28,29,30,31,32
+};
+
+static u16 dib3000mb_default_agc_gain[] =
+	{ 0x0001, 52429,   623, 128, 166, 195, 61,   /* RF ??? */
+	  0x0001, 53766, 38011,   0,  90,  33, 23 }; /* IF ??? */
+
+/* phase noise */
+/* 36 is set when setting the impulse noise */
+static u16 dib3000mb_reg_phase_noise[] = { 33,34,35,37,38 };
+
+static u16 dib3000mb_default_noise_phase[] = { 2, 544, 0, 5, 4 };
+
+/* lock duration */
+static u16 dib3000mb_reg_lock_duration[] = { 39,40 };
+static u16 dib3000mb_default_lock_duration[] = { 135, 135 };
+
+/* AGC loop bandwidth */
+static u16 dib3000mb_reg_agc_bandwidth[] = { 43,44,45,46,47,48,49,50 };
+
+static u16 dib3000mb_agc_bandwidth_low[]  =
+	{ 2088, 10, 2088, 10, 3448, 5, 3448, 5 };
+static u16 dib3000mb_agc_bandwidth_high[] =
+	{ 2349,  5, 2349,  5, 2586, 2, 2586, 2 };
+
+/*
+ * lock0 definition (coff_lock)
+ */
+#define DIB3000MB_REG_LOCK0_MASK		(    51)
+#define DIB3000MB_LOCK0_DEFAULT				(     4)
+
+/*
+ * lock1 definition (cpil_lock)
+ * for auto search
+ * which values hide behind the lock masks
+ */
+#define DIB3000MB_REG_LOCK1_MASK		(    52)
+#define DIB3000MB_LOCK1_SEARCH_4			(0x0004)
+#define DIB3000MB_LOCK1_SEARCH_2048			(0x0800)
+#define DIB3000MB_LOCK1_DEFAULT				(0x0001)
+
+/*
+ * lock2 definition (fec_lock) */
+#define DIB3000MB_REG_LOCK2_MASK		(    53)
+#define DIB3000MB_LOCK2_DEFAULT				(0x0080)
+
+/*
+ * SEQ ? what was that again ... :)
+ * changes when, inversion, guard time and fft is
+ * either automatically detected or not
+ */
+#define DIB3000MB_REG_SEQ				(    54)
+
+/* bandwidth */
+static u16 dib3000mb_reg_bandwidth[] = { 55,56,57,58,59,60,61,62,63,64,65,66,67 };
+static u16 dib3000mb_bandwidth_6mhz[] =
+	{ 0, 33, 53312, 112, 46635, 563, 36565, 0, 1000, 0, 1010, 1, 45264 };
+
+static u16 dib3000mb_bandwidth_7mhz[] =
+	{ 0, 28, 64421,  96, 39973, 483,  3255, 0, 1000, 0, 1010, 1, 45264 };
+
+static u16 dib3000mb_bandwidth_8mhz[] =
+	{ 0, 25, 23600,  84, 34976, 422, 43808, 0, 1000, 0, 1010, 1, 45264 };
+
+#define DIB3000MB_REG_UNK_68				(    68)
+#define DIB3000MB_UNK_68						(     0)
+
+#define DIB3000MB_REG_UNK_69				(    69)
+#define DIB3000MB_UNK_69						(     0)
+
+#define DIB3000MB_REG_UNK_71				(    71)
+#define DIB3000MB_UNK_71						(     0)
+
+#define DIB3000MB_REG_UNK_77				(    77)
+#define DIB3000MB_UNK_77						(     6)
+
+#define DIB3000MB_REG_UNK_78				(    78)
+#define DIB3000MB_UNK_78						(0x0080)
+
+/* isi */
+#define DIB3000MB_REG_ISI				(    79)
+#define DIB3000MB_ISI_ACTIVATE				(     0)
+#define DIB3000MB_ISI_INHIBIT				(     1)
+
+/* sync impovement */
+#define DIB3000MB_REG_SYNC_IMPROVEMENT	(    84)
+#define DIB3000MB_SYNC_IMPROVE_2K_1_8		(     3)
+#define DIB3000MB_SYNC_IMPROVE_DEFAULT		(     0)
+
+/* phase noise compensation inhibition */
+#define DIB3000MB_REG_PHASE_NOISE		(    87)
+#define DIB3000MB_PHASE_NOISE_DEFAULT	(     0)
+
+#define DIB3000MB_REG_UNK_92				(    92)
+#define DIB3000MB_UNK_92						(0x0080)
+
+#define DIB3000MB_REG_UNK_96				(    96)
+#define DIB3000MB_UNK_96						(0x0010)
+
+#define DIB3000MB_REG_UNK_97				(    97)
+#define DIB3000MB_UNK_97						(0x0009)
+
+/* mobile mode ??? */
+#define DIB3000MB_REG_MOBILE_MODE		(   101)
+#define DIB3000MB_MOBILE_MODE_ON			(     1)
+#define DIB3000MB_MOBILE_MODE_OFF			(     0)
+
+#define DIB3000MB_REG_UNK_106			(   106)
+#define DIB3000MB_UNK_106					(0x0080)
+
+#define DIB3000MB_REG_UNK_107			(   107)
+#define DIB3000MB_UNK_107					(0x0080)
+
+#define DIB3000MB_REG_UNK_108			(   108)
+#define DIB3000MB_UNK_108					(0x0080)
+
+/* fft */
+#define DIB3000MB_REG_UNK_121			(   121)
+#define DIB3000MB_UNK_121_2K				(     7)
+#define DIB3000MB_UNK_121_DEFAULT			(     5)
+
+#define DIB3000MB_REG_UNK_122			(   122)
+#define DIB3000MB_UNK_122					(  2867)
+
+/* QAM for mobile mode */
+#define DIB3000MB_REG_MOBILE_MODE_QAM	(   126)
+#define DIB3000MB_MOBILE_MODE_QAM_64		(     3)
+#define DIB3000MB_MOBILE_MODE_QAM_QPSK_16	(     1)
+#define DIB3000MB_MOBILE_MODE_QAM_OFF		(     0)
+
+/*
+ * data diversity when having more than one chip on-board
+ * see also DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY
+ */
+#define DIB3000MB_REG_DATA_IN_DIVERSITY		(   127)
+#define DIB3000MB_DATA_DIVERSITY_IN_OFF			(     0)
+#define DIB3000MB_DATA_DIVERSITY_IN_ON			(     2)
+
+/* vit hrch */
+#define DIB3000MB_REG_VIT_HRCH			(   128)
+
+/* vit code rate */
+#define DIB3000MB_REG_VIT_CODE_RATE		(   129)
+
+/* vit select hp */
+#define DIB3000MB_REG_VIT_HP			(   130)
+
+/* time frame for Bit-Error-Rate calculation */
+#define DIB3000MB_REG_BERLEN			(   135)
+#define DIB3000MB_BERLEN_LONG				(     0)
+#define DIB3000MB_BERLEN_DEFAULT			(     1)
+#define DIB3000MB_BERLEN_MEDIUM				(     2)
+#define DIB3000MB_BERLEN_SHORT				(     3)
+
+/* 142 - 152 FIFO parameters
+ * which is what ?
+ */
+
+#define DIB3000MB_REG_FIFO_142			(   142)
+#define DIB3000MB_FIFO_142					(     0)
+
+/* MPEG2 TS output mode */
+#define DIB3000MB_REG_MPEG2_OUT_MODE	(   143)
+#define DIB3000MB_MPEG2_OUT_MODE_204		(     0)
+#define DIB3000MB_MPEG2_OUT_MODE_188		(     1)
+
+#define DIB3000MB_REG_PID_PARSE			(   144)
+#define DIB3000MB_PID_PARSE_INHIBIT		(     0)
+#define DIB3000MB_PID_PARSE_ACTIVATE	(     1)
+
+#define DIB3000MB_REG_FIFO				(   145)
+#define DIB3000MB_FIFO_INHIBIT				(     1)
+#define DIB3000MB_FIFO_ACTIVATE				(     0)
+
+#define DIB3000MB_REG_FIFO_146			(   146)
+#define DIB3000MB_FIFO_146					(     3)
+
+#define DIB3000MB_REG_FIFO_147			(   147)
+#define DIB3000MB_FIFO_147					(0x0100)
+
+/*
+ * pidfilter
+ * it is not a hardware pidfilter but a filter which drops all pids
+ * except the ones set. Necessary because of the limited USB1.1 bandwidth.
+ * regs 153-168
+ */
+
+#define DIB3000MB_REG_FIRST_PID			(   153)
+#define DIB3000MB_NUM_PIDS				(    16)
+
+/*
+ * output mode
+ * USB devices have to use 'slave'-mode
+ * see also DIB3000MB_REG_ELECT_OUT_MODE
+ */
+#define DIB3000MB_REG_OUTPUT_MODE		(   169)
+#define DIB3000MB_OUTPUT_MODE_GATED_CLK		(     0)
+#define DIB3000MB_OUTPUT_MODE_CONT_CLK		(     1)
+#define DIB3000MB_OUTPUT_MODE_SERIAL		(     2)
+#define DIB3000MB_OUTPUT_MODE_DATA_DIVERSITY	(     5)
+#define DIB3000MB_OUTPUT_MODE_SLAVE			(     6)
+
+/* irq event mask */
+#define DIB3000MB_REG_IRQ_EVENT_MASK		(   170)
+#define DIB3000MB_IRQ_EVENT_MASK				(     0)
+
+/* filter coefficients */
+static u16 dib3000mb_reg_filter_coeffs[] = {
+	171, 172, 173, 174, 175, 176, 177, 178,
+	179, 180, 181, 182, 183, 184, 185, 186,
+	188, 189, 190, 191, 192, 194
+};
+
+static u16 dib3000mb_filter_coeffs[] = {
+	 226,  160,   29,
+ 	 979,  998,   19,
+	  22, 1019, 1006,
+	1022,   12,    6,
+	1017, 1017,    3,
+	   6,       1019,
+	1021,    2,    3,
+	   1,          0,
+};
+
+/*
+ * mobile algorithm (when you are moving with your device)
+ * but not faster than 90 km/h
+ */
+#define DIB3000MB_REG_MOBILE_ALGO		(   195)
+#define DIB3000MB_MOBILE_ALGO_ON			(     0)
+#define DIB3000MB_MOBILE_ALGO_OFF			(     1)
+
+/* multiple demodulators algorithm */
+#define DIB3000MB_REG_MULTI_DEMOD_MSB	(   206)
+#define DIB3000MB_REG_MULTI_DEMOD_LSB	(   207)
+
+/* terminator, no more demods */
+#define DIB3000MB_MULTI_DEMOD_MSB			( 32767)
+#define DIB3000MB_MULTI_DEMOD_LSB			(  4095)
+
+/* bring the device into a known  */
+#define DIB3000MB_REG_RESET_DEVICE		(  1024)
+#define DIB3000MB_RESET_DEVICE				(0x812c)
+#define DIB3000MB_RESET_DEVICE_RST			(     0)
+
+/* hardware clock configuration */
+#define DIB3000MB_REG_CLOCK				(  1027)
+#define DIB3000MB_CLOCK_DEFAULT				(0x9000)
+#define DIB3000MB_CLOCK_DIVERSITY			(0x92b0)
+
+/* power down config */
+#define DIB3000MB_REG_POWER_CONTROL		(  1028)
+#define DIB3000MB_POWER_DOWN				(     1)
+#define DIB3000MB_POWER_UP					(     0)
+
+/* electrical output mode */
+#define DIB3000MB_REG_ELECT_OUT_MODE	(  1029)
+#define DIB3000MB_ELECT_OUT_MODE_OFF		(     0)
+#define DIB3000MB_ELECT_OUT_MODE_ON			(     1)
+
+/* set the tuner i2c address */
+#define DIB3000MB_REG_TUNER				(  1089)
+
+/* monitoring registers (read only) */
+
+/* agc loop locked (size: 1) */
+#define DIB3000MB_REG_AGC_LOCK			(   324)
+
+/* agc power (size: 16) */
+#define DIB3000MB_REG_AGC_POWER			(   325)
+
+/* agc1 value (16) */
+#define DIB3000MB_REG_AGC1_VALUE		(   326)
+
+/* agc2 value (16) */
+#define DIB3000MB_REG_AGC2_VALUE		(   327)
+
+/* total RF power (16), can be used for signal strength */
+#define DIB3000MB_REG_RF_POWER			(   328)
+
+/* dds_frequency with offset (24) */
+#define DIB3000MB_REG_DDS_VALUE_MSB		(   339)
+#define DIB3000MB_REG_DDS_VALUE_LSB		(   340)
+
+/* timing offset signed (24) */
+#define DIB3000MB_REG_TIMING_OFFSET_MSB	(   341)
+#define DIB3000MB_REG_TIMING_OFFSET_LSB	(   342)
+
+/* fft start position (13) */
+#define DIB3000MB_REG_FFT_WINDOW_POS	(   353)
+
+/* carriers locked (1) */
+#define DIB3000MB_REG_CARRIER_LOCK		(   355)
+
+/* noise power (24) */
+#define DIB3000MB_REG_NOISE_POWER_MSB	(   372)
+#define DIB3000MB_REG_NOISE_POWER_LSB	(   373)
+
+#define DIB3000MB_REG_MOBILE_NOISE_MSB	(   374)
+#define DIB3000MB_REG_MOBILE_NOISE_LSB	(   375)
+
+/*
+ * signal power (16), this and the above can be
+ * used to calculate the signal/noise - ratio
+ */
+#define DIB3000MB_REG_SIGNAL_POWER		(   380)
+
+/* mer (24) */
+#define DIB3000MB_REG_MER_MSB			(   381)
+#define DIB3000MB_REG_MER_LSB			(   382)
+
+/*
+ * Transmission Parameter Signalling (TPS)
+ * the following registers can be used to get TPS-information.
+ * The values are according to the DVB-T standard.
+ */
+
+/* TPS locked (1) */
+#define DIB3000MB_REG_TPS_LOCK			(   394)
+
+/* QAM from TPS (2) (values according to DIB3000MB_REG_QAM) */
+#define DIB3000MB_REG_TPS_QAM			(   398)
+
+/* hierarchy from TPS (1) */
+#define DIB3000MB_REG_TPS_HRCH			(   399)
+
+/* alpha from TPS (3) (values according to DIB3000MB_REG_VIT_ALPHA) */
+#define DIB3000MB_REG_TPS_VIT_ALPHA		(   400)
+
+/* code rate high priority from TPS (3) (values according to DIB3000MB_FEC_*) */
+#define DIB3000MB_REG_TPS_CODE_RATE_HP	(   401)
+
+/* code rate low priority from TPS (3) if DIB3000MB_REG_TPS_VIT_ALPHA */
+#define DIB3000MB_REG_TPS_CODE_RATE_LP	(   402)
+
+/* guard time from TPS (2) (values according to DIB3000MB_REG_GUARD_TIME */
+#define DIB3000MB_REG_TPS_GUARD_TIME	(   403)
+
+/* fft size from TPS (2) (values according to DIB3000MB_REG_FFT) */
+#define DIB3000MB_REG_TPS_FFT			(   404)
+
+/* cell id from TPS (16) */
+#define DIB3000MB_REG_TPS_CELL_ID		(   406)
+
+/* TPS (68) */
+#define DIB3000MB_REG_TPS_1				(   408)
+#define DIB3000MB_REG_TPS_2				(   409)
+#define DIB3000MB_REG_TPS_3				(   410)
+#define DIB3000MB_REG_TPS_4				(   411)
+#define DIB3000MB_REG_TPS_5				(   412)
+
+/* bit error rate (before RS correction) (21) */
+#define DIB3000MB_REG_BER_MSB			(   414)
+#define DIB3000MB_REG_BER_LSB			(   415)
+
+/* packet error rate (uncorrected TS packets) (16) */
+#define DIB3000MB_REG_PACKET_ERROR_RATE	(   417)
+
+/* uncorrected packet count (16) */
+#define DIB3000MB_REG_UNC				(   420)
+
+/* viterbi locked (1) */
+#define DIB3000MB_REG_VIT_LCK			(   421)
+
+/* viterbi inidcator (16) */
+#define DIB3000MB_REG_VIT_INDICATOR		(   422)
+
+/* transport stream sync lock (1) */
+#define DIB3000MB_REG_TS_SYNC_LOCK		(   423)
+
+/* transport stream RS lock (1) */
+#define DIB3000MB_REG_TS_RS_LOCK		(   424)
+
+/* lock mask 0 value (1) */
+#define DIB3000MB_REG_LOCK0_VALUE		(   425)
+
+/* lock mask 1 value (1) */
+#define DIB3000MB_REG_LOCK1_VALUE		(   426)
+
+/* lock mask 2 value (1) */
+#define DIB3000MB_REG_LOCK2_VALUE		(   427)
+
+/* interrupt pending for auto search */
+#define DIB3000MB_REG_AS_IRQ_PENDING	(   434)
+
+#endif