aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/dvb/frontends/tda1004x.h
diff options
context:
space:
mode:
authorHartmut Hackmann <hartmut.hackmann@t-online.de>2007-04-27 12:31:10 -0300
committerMauro Carvalho Chehab <mchehab@infradead.org>2007-04-27 15:43:29 -0300
commit1bb0e8667fab773d6c5a3d7caf506001deaeb7f5 (patch)
treed74d1dca69859a253e9bab9bb3fda2611abcac50 /drivers/media/dvb/frontends/tda1004x.h
parent2435be11ae1afb64ac7dfb25e10b6e3037ab0522 (diff)
V4L/DVB (5311): Tda1004x driver updates
There are the following changes: - separate configuration of IF and GPIOs. - set GPIOs before firmware load. This helps to avoid I2C address collisions. - if desired invert GPIOs at sleep (automatic return to analog mode of card). - added 3 tuner configuration bytes to config stuct. - added i2c gate address to config struct. - moved _state struct declaration to header file to make it accessible on board layer. - added "conf_probed" to the state struct to allow i.e. probing for correct tuner version. - changed firmware load mechanism to always: + check if already loaded + try to boot from eeprom + try downlad from host - corrected name of tda10046 firmware image (backward compatible). Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'drivers/media/dvb/frontends/tda1004x.h')
-rw-r--r--drivers/media/dvb/frontends/tda1004x.h49
1 files changed, 45 insertions, 4 deletions
diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h
index ec502d71b83..886db3f75d5 100644
--- a/drivers/media/dvb/frontends/tda1004x.h
+++ b/drivers/media/dvb/frontends/tda1004x.h
@@ -35,9 +35,23 @@ enum tda10046_agc {
TDA10046_AGC_DEFAULT, /* original configuration */
TDA10046_AGC_IFO_AUTO_NEG, /* IF AGC only, automatic, negtive */
TDA10046_AGC_IFO_AUTO_POS, /* IF AGC only, automatic, positive */
- TDA10046_AGC_TDA827X_GP11, /* IF AGC only, special setup for tda827x */
- TDA10046_AGC_TDA827X_GP00, /* same as above, but GPIOs 0 */
- TDA10046_AGC_TDA827X_GP01, /* same as above, but GPIO3=0 GPIO1=1*/
+ TDA10046_AGC_TDA827X, /* IF AGC only, special setup for tda827x */
+};
+
+/* Many (hybrid) boards use GPIO 1 and 3
+ GPIO1 analog - dvb switch
+ GPIO3 firmware eeprom address switch
+*/
+enum tda10046_gpio {
+ TDA10046_GPTRI = 0x00, /* All GPIOs tristate */
+ TDA10046_GP00 = 0x40, /* GPIO3=0, GPIO1=0 */
+ TDA10046_GP01 = 0x42, /* GPIO3=0, GPIO1=1 */
+ TDA10046_GP10 = 0x48, /* GPIO3=1, GPIO1=0 */
+ TDA10046_GP11 = 0x4a, /* GPIO3=1, GPIO1=1 */
+ TDA10046_GP00_I = 0x80, /* GPIO3=0, GPIO1=0, invert in sleep mode*/
+ TDA10046_GP01_I = 0x82, /* GPIO3=0, GPIO1=1, invert in sleep mode */
+ TDA10046_GP10_I = 0x88, /* GPIO3=1, GPIO1=0, invert in sleep mode */
+ TDA10046_GP11_I = 0x8a, /* GPIO3=1, GPIO1=1, invert in sleep mode */
};
enum tda10046_if {
@@ -67,11 +81,38 @@ struct tda1004x_config
/* AGC configuration */
enum tda10046_agc agc_config;
+ /* setting of GPIO1 and 3 */
+ enum tda10046_gpio gpio_config;
+
+ /* slave address and configuration of the tuner */
+ u8 tuner_address;
+ u8 tuner_config;
+ u8 antenna_switch;
+
+ /* if the board uses another I2c Bridge (tda8290), its address */
+ u8 i2c_gate;
+
/* request firmware for device */
- /* set this to NULL if the card has a firmware EEPROM */
int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
};
+enum tda1004x_demod {
+ TDA1004X_DEMOD_TDA10045,
+ TDA1004X_DEMOD_TDA10046,
+};
+
+struct tda1004x_state {
+ struct i2c_adapter* i2c;
+ const struct tda1004x_config* config;
+ struct dvb_frontend frontend;
+
+ /* this allows to store probed board information */
+ int conf_probed;
+
+ /* private demod data */
+ enum tda1004x_demod demod_type;
+};
+
#if defined(CONFIG_DVB_TDA1004X) || (defined(CONFIG_DVB_TDA1004X_MODULE) && defined(MODULE))
extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
struct i2c_adapter* i2c);