V4L/DVB (6691): pvrusb2: Rework pipeline state control

This is a new implementation for video pipeline control within the
pvrusb2 driver.  Actual start/stop of the pipeline is moved to the
driver's kernel thread.  Pipeline stages are controlled autonomously
based on surrounding pipeline or application control state.  Kernel
thread management is also cleaned up and moved into the internal
control structure of the driver, solving a set up / tear down race
along the way.  Better failure recovery is implemented with this new
control strategy.  Also with this change comes better control of the
cx23416 encoder, building on additional information learned about the
peculiarities of controlling this part (this information was the
original trigger for this rework).  With this change, overall encoder
stability should be considerably improved.  Yes, this is a large
change for this driver, but due to the nature of the feature being
worked on, the changes are fairly pervasive and would be difficult to
break into smaller pieces with any semblence of step-wise stability.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 20 insertions, 19 deletions

diff --git a/drivers/media/video/pvrusb2/pvrusb2-debug.h b/drivers/media/video/pvrusb2/pvrusb2-debug.h
index da6441b88f3..fca49d8a931 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-debug.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-debug.h
@@ -34,25 +34,26 @@ extern int pvrusb2_debug;
 #define PVR2_TRACE_INIT       (1 <<  5) /* misc initialization steps */
 #define PVR2_TRACE_START_STOP (1 <<  6) /* Streaming start / stop */
 #define PVR2_TRACE_CTL        (1 <<  7) /* commit of control changes */
-#define PVR2_TRACE_DEBUG      (1 <<  8) /* Temporary debug code */
-#define PVR2_TRACE_EEPROM     (1 <<  9) /* eeprom parsing / report */
-#define PVR2_TRACE_STRUCT     (1 << 10) /* internal struct creation */
-#define PVR2_TRACE_OPEN_CLOSE (1 << 11) /* application open / close */
-#define PVR2_TRACE_CREG       (1 << 12) /* Main critical region entry / exit */
-#define PVR2_TRACE_SYSFS      (1 << 13) /* Sysfs driven I/O */
-#define PVR2_TRACE_FIRMWARE   (1 << 14) /* firmware upload actions */
-#define PVR2_TRACE_CHIPS      (1 << 15) /* chip broadcast operation */
-#define PVR2_TRACE_I2C        (1 << 16) /* I2C related stuff */
-#define PVR2_TRACE_I2C_CMD    (1 << 17) /* Software commands to I2C modules */
-#define PVR2_TRACE_I2C_CORE   (1 << 18) /* I2C core debugging */
-#define PVR2_TRACE_I2C_TRAF   (1 << 19) /* I2C traffic through the adapter */
-#define PVR2_TRACE_V4LIOCTL   (1 << 20) /* v4l ioctl details */
-#define PVR2_TRACE_ENCODER    (1 << 21) /* mpeg2 encoder operation */
-#define PVR2_TRACE_BUF_POOL   (1 << 22) /* Track buffer pool management */
-#define PVR2_TRACE_BUF_FLOW   (1 << 23) /* Track buffer flow in system */
-#define PVR2_TRACE_DATA_FLOW  (1 << 24) /* Track data flow */
-#define PVR2_TRACE_DEBUGIFC   (1 << 25) /* Debug interface actions */
-#define PVR2_TRACE_GPIO       (1 << 26) /* GPIO state bit changes */
+#define PVR2_TRACE_STATE      (1 <<  8) /* Device state changes */
+#define PVR2_TRACE_STBITS     (1 <<  9) /* Individual bit state changes */
+#define PVR2_TRACE_EEPROM     (1 << 10) /* eeprom parsing / report */
+#define PVR2_TRACE_STRUCT     (1 << 11) /* internal struct creation */
+#define PVR2_TRACE_OPEN_CLOSE (1 << 12) /* application open / close */
+#define PVR2_TRACE_CREG       (1 << 13) /* Main critical region entry / exit */
+#define PVR2_TRACE_SYSFS      (1 << 14) /* Sysfs driven I/O */
+#define PVR2_TRACE_FIRMWARE   (1 << 15) /* firmware upload actions */
+#define PVR2_TRACE_CHIPS      (1 << 16) /* chip broadcast operation */
+#define PVR2_TRACE_I2C        (1 << 17) /* I2C related stuff */
+#define PVR2_TRACE_I2C_CMD    (1 << 18) /* Software commands to I2C modules */
+#define PVR2_TRACE_I2C_CORE   (1 << 19) /* I2C core debugging */
+#define PVR2_TRACE_I2C_TRAF   (1 << 20) /* I2C traffic through the adapter */
+#define PVR2_TRACE_V4LIOCTL   (1 << 21) /* v4l ioctl details */
+#define PVR2_TRACE_ENCODER    (1 << 22) /* mpeg2 encoder operation */
+#define PVR2_TRACE_BUF_POOL   (1 << 23) /* Track buffer pool management */
+#define PVR2_TRACE_BUF_FLOW   (1 << 24) /* Track buffer flow in system */
+#define PVR2_TRACE_DATA_FLOW  (1 << 25) /* Track data flow */
+#define PVR2_TRACE_DEBUGIFC   (1 << 26) /* Debug interface actions */
+#define PVR2_TRACE_GPIO       (1 << 27) /* GPIO state bit changes */
 
 
 #endif /* __PVRUSB2_HDW_INTERNAL_H */