aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/pvrusb2
diff options
context:
space:
mode:
authorMike Isely <isely@pobox.com>2007-04-28 20:08:33 -0300
committerMauro Carvalho Chehab <mchehab@infradead.org>2007-05-09 10:12:33 -0300
commitdb71b7df76dab261cc9f27525765211bd58345b1 (patch)
treed6b64ed66983a0eb8a368995c426b4e86b72e629 /drivers/media/video/pvrusb2
parent4f393828d1dae28905447fcc9845ba0b5f414c62 (diff)
V4L/DVB (5574): Pvrusb2: Improve handling of PAL-60 video standard
This patch originated with Servaas Vandenberghe <vdb128@picaros.org> and has been further developed a bit (to preserve saa7115 behavior). These changes allow for correct operation of PAL-60 video (Servaas tested this against a PAL-B/G tuner with the video standard overridden as a module option). Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'drivers/media/video/pvrusb2')
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-encoder.c13
1 files changed, 10 insertions, 3 deletions
diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c
index 5669c8ca9ca..20b614436d2 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c
@@ -391,22 +391,29 @@ static int pvr2_encoder_prep_config(struct pvr2_hdw *hdw)
int pvr2_encoder_configure(struct pvr2_hdw *hdw)
{
int ret;
+ int val;
pvr2_trace(PVR2_TRACE_ENCODER,"pvr2_encoder_configure"
" (cx2341x module)");
hdw->enc_ctl_state.port = CX2341X_PORT_STREAMING;
hdw->enc_ctl_state.width = hdw->res_hor_val;
hdw->enc_ctl_state.height = hdw->res_ver_val;
- hdw->enc_ctl_state.is_50hz = ((hdw->std_mask_cur &
- (V4L2_STD_NTSC|V4L2_STD_PAL_M)) ?
+ hdw->enc_ctl_state.is_50hz = ((hdw->std_mask_cur & V4L2_STD_525_60) ?
0 : 1);
ret = 0;
ret |= pvr2_encoder_prep_config(hdw);
+ /* saa7115: 0xf0 */
+ val = 0xf0;
+ if (hdw->hdw_type == PVR2_HDW_TYPE_24XXX) {
+ /* ivtv cx25840: 0x140 */
+ val = 0x140;
+ }
+
if (!ret) ret = pvr2_encoder_vcmd(
hdw,CX2341X_ENC_SET_NUM_VSYNC_LINES, 2,
- 0xf0, 0xf0);
+ val, val);
/* setup firmware to notify us about some events (don't know why...) */
if (!ret) ret = pvr2_encoder_vcmd(