V4L/DVB (7019): V4L: add support for Syntek DC1125 webcams

This driver supports cameras with USB ID 174f:a311 or 05e1:0501,
and the ov965x sensors. These devices are found in some Asus laptops
and probably somewhere else.

It is based on the stk11xx driver written by Nicolas Vivien

Signed-off-by: Jaime Velasco Juan <jsagarribay@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

5 files changed, 2197 insertions, 0 deletions

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 7431f6da5ca..a2e8987a619 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -821,6 +821,19 @@ config USB_ZR364XX
 	  To compile this driver as a module, choose M here: the
 	  module will be called zr364xx.
 
+config USB_STKWEBCAM
+	tristate "USB Syntek DC1125 Camera support"
+	depends on VIDEO_V4L2 && EXPERIMENTAL
+	---help---
+	  Say Y here if you want to use this type of camera.
+	  Supported devices are typically found in some Asus laptops,
+	  with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
+	  may be supported by the stk11xx driver, from which this is
+	  derived, see http://stk11xx.sourceforge.net
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stkwebcam.
+
 endif # V4L_USB_DRIVERS
 
 endif # VIDEO_CAPTURE_DRIVERS
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 74a2a1c45fe..28ddd146c1c 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -8,6 +8,8 @@ tuner-objs	:=	tuner-core.o tuner-types.o
 
 msp3400-objs	:=	msp3400-driver.o msp3400-kthreads.o
 
+stkwebcam-objs	:=	stk-webcam.o stk-sensor.o
+
 obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o compat_ioctl32.o \
 			   v4l2-int-device.o
 
@@ -116,6 +118,7 @@ obj-$(CONFIG_USB_SE401)         += se401.o
 obj-$(CONFIG_USB_STV680)        += stv680.o
 obj-$(CONFIG_USB_W9968CF)       += w9968cf.o
 obj-$(CONFIG_USB_ZR364XX)       += zr364xx.o
+obj-$(CONFIG_USB_STKWEBCAM)     += stkwebcam.o
 
 obj-$(CONFIG_USB_SN9C102)       += sn9c102/
 obj-$(CONFIG_USB_ET61X251)      += et61x251/
diff --git a/drivers/media/video/stk-sensor.c b/drivers/media/video/stk-sensor.c
new file mode 100644
index 00000000000..4a9a0b62efa
--- /dev/null
+++ b/drivers/media/video/stk-sensor.c
@@ -0,0 +1,578 @@
+/* stk-sensor.c: Driver for ov96xx sensor (used in some Syntek webcams)
+ *
+ * Copyright 2007-2008 Jaime Velasco Juan <jsagarribay@gmail.com>
+ *
+ * Some parts derived from ov7670.c:
+ * Copyright 2006 One Laptop Per Child Association, Inc.  Written
+ * by Jonathan Corbet with substantial inspiration from Mark
+ * McClelland's ovcamchip code.
+ *
+ * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
+ *
+ * This file may be distributed under the terms of the GNU General
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Controlling the sensor via the STK1125 vendor specific control interface:
+ * The camera uses an OmniVision sensor and the stk1125 provides an
+ * SCCB(i2c)-USB bridge which let us program the sensor.
+ * In my case the sensor id is 0x9652, it can be read from sensor's register
+ * 0x0A and 0x0B as follows:
+ * - read register #R:
+ *   output #R to index 0x0208
+ *   output 0x0070 to index 0x0200
+ *   input 1 byte from index 0x0201 (some kind of status register)
+ *     until its value is 0x01
+ *   input 1 byte from index 0x0209. This is the value of #R
+ * - write value V to register #R
+ *   output #R to index 0x0204
+ *   output V to index 0x0205
+ *   output 0x0005 to index 0x0200
+ *   input 1 byte from index 0x0201 until its value becomes 0x04
+ */
+
+/* It seems the i2c bus is controlled with these registers */
+
+#include "stk-webcam.h"
+
+#define STK_IIC_BASE		(0x0200)
+#  define STK_IIC_OP		(STK_IIC_BASE)
+#    define STK_IIC_OP_TX	(0x05)
+#    define STK_IIC_OP_RX	(0x70)
+#  define STK_IIC_STAT		(STK_IIC_BASE+1)
+#    define STK_IIC_STAT_TX_OK	(0x04)
+#    define STK_IIC_STAT_RX_OK	(0x01)
+/* I don't know what does this register.
+ * when it is 0x00 or 0x01, we cannot talk to the sensor,
+ * other values work */
+#  define STK_IIC_ENABLE	(STK_IIC_BASE+2)
+#    define STK_IIC_ENABLE_NO	(0x00)
+/* This is what the driver writes in windows */
+#    define STK_IIC_ENABLE_YES	(0x1e)
+/*
+ * Address of the slave. Seems like the binary driver look for the
+ * sensor in multiple places, attempting a reset sequence.
+ * We only know about the ov9650
+ */
+#  define STK_IIC_ADDR		(STK_IIC_BASE+3)
+#  define STK_IIC_TX_INDEX	(STK_IIC_BASE+4)
+#  define STK_IIC_TX_VALUE	(STK_IIC_BASE+5)
+#  define STK_IIC_RX_INDEX	(STK_IIC_BASE+8)
+#  define STK_IIC_RX_VALUE	(STK_IIC_BASE+9)
+
+#define MAX_RETRIES		(50)
+
+#define SENSOR_ADDRESS		(0x60)
+
+/* From ov7670.c (These registers aren't fully accurate) */
+
+/* Registers */
+#define REG_GAIN	0x00	/* Gain lower 8 bits (rest in vref) */
+#define REG_BLUE	0x01	/* blue gain */
+#define REG_RED		0x02	/* red gain */
+#define REG_VREF	0x03	/* Pieces of GAIN, VSTART, VSTOP */
+#define REG_COM1	0x04	/* Control 1 */
+#define  COM1_CCIR656	  0x40  /* CCIR656 enable */
+#define  COM1_QFMT	  0x20  /* QVGA/QCIF format */
+#define  COM1_SKIP_0	  0x00  /* Do not skip any row */
+#define  COM1_SKIP_2	  0x04  /* Skip 2 rows of 4 */
+#define  COM1_SKIP_3	  0x08  /* Skip 3 rows of 4 */
+#define REG_BAVE	0x05	/* U/B Average level */
+#define REG_GbAVE	0x06	/* Y/Gb Average level */
+#define REG_AECHH	0x07	/* AEC MS 5 bits */
+#define REG_RAVE	0x08	/* V/R Average level */
+#define REG_COM2	0x09	/* Control 2 */
+#define  COM2_SSLEEP	  0x10	/* Soft sleep mode */
+#define REG_PID		0x0a	/* Product ID MSB */
+#define REG_VER		0x0b	/* Product ID LSB */
+#define REG_COM3	0x0c	/* Control 3 */
+#define  COM3_SWAP	  0x40	  /* Byte swap */
+#define  COM3_SCALEEN	  0x08	  /* Enable scaling */
+#define  COM3_DCWEN	  0x04	  /* Enable downsamp/crop/window */
+#define REG_COM4	0x0d	/* Control 4 */
+#define REG_COM5	0x0e	/* All "reserved" */
+#define REG_COM6	0x0f	/* Control 6 */
+#define REG_AECH	0x10	/* More bits of AEC value */
+#define REG_CLKRC	0x11	/* Clock control */
+#define   CLK_PLL	  0x80	  /* Enable internal PLL */
+#define   CLK_EXT	  0x40	  /* Use external clock directly */
+#define   CLK_SCALE	  0x3f	  /* Mask for internal clock scale */
+#define REG_COM7	0x12	/* Control 7 */
+#define   COM7_RESET	  0x80	  /* Register reset */
+#define   COM7_FMT_MASK	  0x38
+#define   COM7_FMT_SXGA	  0x00
+#define   COM7_FMT_VGA	  0x40
+#define	  COM7_FMT_CIF	  0x20	  /* CIF format */
+#define   COM7_FMT_QVGA	  0x10	  /* QVGA format */
+#define   COM7_FMT_QCIF	  0x08	  /* QCIF format */
+#define	  COM7_RGB	  0x04	  /* bits 0 and 2 - RGB format */
+#define	  COM7_YUV	  0x00	  /* YUV */
+#define	  COM7_BAYER	  0x01	  /* Bayer format */
+#define	  COM7_PBAYER	  0x05	  /* "Processed bayer" */
+#define REG_COM8	0x13	/* Control 8 */
+#define   COM8_FASTAEC	  0x80	  /* Enable fast AGC/AEC */
+#define   COM8_AECSTEP	  0x40	  /* Unlimited AEC step size */
+#define   COM8_BFILT	  0x20	  /* Band filter enable */
+#define   COM8_AGC	  0x04	  /* Auto gain enable */
+#define   COM8_AWB	  0x02	  /* White balance enable */
+#define   COM8_AEC	  0x01	  /* Auto exposure enable */
+#define REG_COM9	0x14	/* Control 9  - gain ceiling */
+#define REG_COM10	0x15	/* Control 10 */
+#define   COM10_HSYNC	  0x40	  /* HSYNC instead of HREF */
+#define   COM10_PCLK_HB	  0x20	  /* Suppress PCLK on horiz blank */
+#define   COM10_HREF_REV  0x08	  /* Reverse HREF */
+#define   COM10_VS_LEAD	  0x04	  /* VSYNC on clock leading edge */
+#define   COM10_VS_NEG	  0x02	  /* VSYNC negative */
+#define   COM10_HS_NEG	  0x01	  /* HSYNC negative */
+#define REG_HSTART	0x17	/* Horiz start high bits */
+#define REG_HSTOP	0x18	/* Horiz stop high bits */
+#define REG_VSTART	0x19	/* Vert start high bits */
+#define REG_VSTOP	0x1a	/* Vert stop high bits */
+#define REG_PSHFT	0x1b	/* Pixel delay after HREF */
+#define REG_MIDH	0x1c	/* Manuf. ID high */
+#define REG_MIDL	0x1d	/* Manuf. ID low */
+#define REG_MVFP	0x1e	/* Mirror / vflip */
+#define   MVFP_MIRROR	  0x20	  /* Mirror image */
+#define   MVFP_FLIP	  0x10	  /* Vertical flip */
+
+#define REG_AEW		0x24	/* AGC upper limit */
+#define REG_AEB		0x25	/* AGC lower limit */
+#define REG_VPT		0x26	/* AGC/AEC fast mode op region */
+#define REG_ADVFL	0x2d	/* Insert dummy lines (LSB) */
+#define REG_ADVFH	0x2e	/* Insert dummy lines (MSB) */
+#define REG_HSYST	0x30	/* HSYNC rising edge delay */
+#define REG_HSYEN	0x31	/* HSYNC falling edge delay */
+#define REG_HREF	0x32	/* HREF pieces */
+#define REG_TSLB	0x3a	/* lots of stuff */
+#define   TSLB_YLAST	  0x04	  /* UYVY or VYUY - see com13 */
+#define   TSLB_BYTEORD	  0x08	  /* swap bytes in 16bit mode? */
+#define REG_COM11	0x3b	/* Control 11 */
+#define   COM11_NIGHT	  0x80	  /* NIght mode enable */
+#define   COM11_NMFR	  0x60	  /* Two bit NM frame rate */
+#define   COM11_HZAUTO	  0x10	  /* Auto detect 50/60 Hz */
+#define	  COM11_50HZ	  0x08	  /* Manual 50Hz select */
+#define   COM11_EXP	  0x02
+#define REG_COM12	0x3c	/* Control 12 */
+#define   COM12_HREF	  0x80	  /* HREF always */
+#define REG_COM13	0x3d	/* Control 13 */
+#define   COM13_GAMMA	  0x80	  /* Gamma enable */
+#define	  COM13_UVSAT	  0x40	  /* UV saturation auto adjustment */
+#define	  COM13_CMATRIX	  0x10	  /* Enable color matrix for RGB or YUV */
+#define   COM13_UVSWAP	  0x01	  /* V before U - w/TSLB */
+#define REG_COM14	0x3e	/* Control 14 */
+#define   COM14_DCWEN	  0x10	  /* DCW/PCLK-scale enable */
+#define REG_EDGE	0x3f	/* Edge enhancement factor */
+#define REG_COM15	0x40	/* Control 15 */
+#define   COM15_R10F0	  0x00	  /* Data range 10 to F0 */
+#define	  COM15_R01FE	  0x80	  /*            01 to FE */
+#define   COM15_R00FF	  0xc0	  /*            00 to FF */
+#define   COM15_RGB565	  0x10	  /* RGB565 output */
+#define   COM15_RGBFIXME	  0x20	  /* FIXME  */
+#define   COM15_RGB555	  0x30	  /* RGB555 output */
+#define REG_COM16	0x41	/* Control 16 */
+#define   COM16_AWBGAIN   0x08	  /* AWB gain enable */
+#define REG_COM17	0x42	/* Control 17 */
+#define   COM17_AECWIN	  0xc0	  /* AEC window - must match COM4 */
+#define   COM17_CBAR	  0x08	  /* DSP Color bar */
+
+/*
+ * This matrix defines how the colors are generated, must be
+ * tweaked to adjust hue and saturation.
+ *
+ * Order: v-red, v-green, v-blue, u-red, u-green, u-blue
+ *
+ * They are nine-bit signed quantities, with the sign bit
+ * stored in 0x58.  Sign for v-red is bit 0, and up from there.
+ */
+#define	REG_CMATRIX_BASE 0x4f
+#define   CMATRIX_LEN 6
+#define REG_CMATRIX_SIGN 0x58
+
+
+#define REG_BRIGHT	0x55	/* Brightness */
+#define REG_CONTRAS	0x56	/* Contrast control */
+
+#define REG_GFIX	0x69	/* Fix gain control */
+
+#define REG_RGB444	0x8c	/* RGB 444 control */
+#define   R444_ENABLE	  0x02	  /* Turn on RGB444, overrides 5x5 */
+#define   R444_RGBX	  0x01	  /* Empty nibble at end */
+
+#define REG_HAECC1	0x9f	/* Hist AEC/AGC control 1 */
+#define REG_HAECC2	0xa0	/* Hist AEC/AGC control 2 */
+
+#define REG_BD50MAX	0xa5	/* 50hz banding step limit */
+#define REG_HAECC3	0xa6	/* Hist AEC/AGC control 3 */
+#define REG_HAECC4	0xa7	/* Hist AEC/AGC control 4 */
+#define REG_HAECC5	0xa8	/* Hist AEC/AGC control 5 */
+#define REG_HAECC6	0xa9	/* Hist AEC/AGC control 6 */
+#define REG_HAECC7	0xaa	/* Hist AEC/AGC control 7 */
+#define REG_BD60MAX	0xab	/* 60hz banding step limit */
+
+
+
+
+/* Returns 0 if OK */
+int stk_sensor_outb(struct stk_camera *dev, u8 reg, u8 val)
+{
+	int i = 0;
+	int tmpval = 0;
+
+	if (stk_camera_write_reg(dev, STK_IIC_TX_INDEX, reg))
+		return 1;
+	if (stk_camera_write_reg(dev, STK_IIC_TX_VALUE, val))
+		return 1;
+	if (stk_camera_write_reg(dev, STK_IIC_OP, STK_IIC_OP_TX))
+		return 1;
+	do {
+		if (stk_camera_read_reg(dev, STK_IIC_STAT, &tmpval))
+			return 1;
+		i++;
+	} while (tmpval == 0 && i < MAX_RETRIES);
+	if (tmpval != STK_IIC_STAT_TX_OK) {
+		if (tmpval)
+			STK_ERROR("stk_sensor_outb failed, status=0x%02x\n",
+				tmpval);
+		return 1;
+	} else
+		return 0;
+}
+
+int stk_sensor_inb(struct stk_camera *dev, u8 reg, u8 *val)
+{
+	int i = 0;
+	int tmpval = 0;
+
+	if (stk_camera_write_reg(dev, STK_IIC_RX_INDEX, reg))
+		return 1;
+	if (stk_camera_write_reg(dev, STK_IIC_OP, STK_IIC_OP_RX))
+		return 1;
+	do {
+		if (stk_camera_read_reg(dev, STK_IIC_STAT, &tmpval))
+			return 1;
+		i++;
+	} while (tmpval == 0 && i < MAX_RETRIES);
+	if (tmpval != STK_IIC_STAT_RX_OK) {
+		if (tmpval)
+			STK_ERROR("stk_sensor_inb failed, status=0x%02x\n",
+				tmpval);
+		return 1;
+	}
+
+	if (stk_camera_read_reg(dev, STK_IIC_RX_VALUE, &tmpval))
+		return 1;
+
+	*val = (u8) tmpval;
+	return 0;
+}
+
+static int stk_sensor_write_regvals(struct stk_camera *dev,
+		struct regval *rv)
+{
+	int ret;
+	if (rv == NULL)
+		return 0;
+	while (rv->reg != 0xff || rv->val != 0xff) {
+		ret = stk_sensor_outb(dev, rv->reg, rv->val);
+		if (ret != 0)
+			return ret;
+		rv++;
+	}
+	return 0;
+}
+
+int stk_sensor_sleep(struct stk_camera *dev)
+{
+	u8 tmp;
+	return stk_sensor_inb(dev, REG_COM2, &tmp)
+		|| stk_sensor_outb(dev, REG_COM2, tmp|COM2_SSLEEP);
+}
+
+int stk_sensor_wakeup(struct stk_camera *dev)
+{
+	u8 tmp;
+	return stk_sensor_inb(dev, REG_COM2, &tmp)
+		|| stk_sensor_outb(dev, REG_COM2, tmp&~COM2_SSLEEP);
+}
+
+static struct regval ov_initvals[] = {
+	{REG_CLKRC, CLK_PLL},
+	{REG_COM11, 0x01},
+	{0x6a, 0x7d},
+	{REG_AECH, 0x40},
+	{REG_GAIN, 0x00},
+	{REG_BLUE, 0x80},
+	{REG_RED, 0x80},
+	/* Do not enable fast AEC for now */
+	/*{REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC},*/
+	{REG_COM8, COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC},
+	{0x39, 0x50}, {0x38, 0x93},
+	{0x37, 0x00}, {0x35, 0x81},
+	{REG_COM5, 0x20},
+	{REG_COM1, 0x00},
+	{REG_COM3, 0x00},
+	{REG_COM4, 0x00},
+	{REG_PSHFT, 0x00},
+	{0x16, 0x07},
+	{0x33, 0xe2}, {0x34, 0xbf},
+	{REG_COM16, 0x00},
+	{0x96, 0x04},
+	/* Gamma curve values */
+/*	{ 0x7a, 0x20 },		{ 0x7b, 0x10 },
+	{ 0x7c, 0x1e },		{ 0x7d, 0x35 },
+	{ 0x7e, 0x5a },		{ 0x7f, 0x69 },
+	{ 0x80, 0x76 },		{ 0x81, 0x80 },
+	{ 0x82, 0x88 },		{ 0x83, 0x8f },
+	{ 0x84, 0x96 },		{ 0x85, 0xa3 },
+	{ 0x86, 0xaf },		{ 0x87, 0xc4 },
+	{ 0x88, 0xd7 },		{ 0x89, 0xe8 },
+*/
+	{REG_GFIX, 0x40},
+	{0x8e, 0x00},
+	{REG_COM12, 0x73},
+	{0x8f, 0xdf}, {0x8b, 0x06},
+	{0x8c, 0x20},
+	{0x94, 0x88}, {0x95, 0x88},
+/*	{REG_COM15, 0xc1}, TODO */
+	{0x29, 0x3f},
+	{REG_COM6, 0x42},
+	{REG_BD50MAX, 0x80},
+	{REG_HAECC6, 0xb8}, {REG_HAECC7, 0x92},
+	{REG_BD60MAX, 0x0a},
+	{0x90, 0x00}, {0x91, 0x00},
+	{REG_HAECC1, 0x00}, {REG_HAECC2, 0x00},
+	{REG_AEW, 0x68}, {REG_AEB, 0x5c},
+	{REG_VPT, 0xc3},
+	{REG_COM9, 0x2e},
+	{0x2a, 0x00}, {0x2b, 0x00},
+
+	{0xff, 0xff}, /* END MARKER */
+};
+
+/* Probe the I2C bus and initialise the sensor chip */
+int stk_sensor_init(struct stk_camera *dev)
+{
+	u8 idl = 0;
+	u8 idh = 0;
+
+	if (stk_camera_write_reg(dev, STK_IIC_ENABLE, STK_IIC_ENABLE_YES)
+		|| stk_camera_write_reg(dev, STK_IIC_ADDR, SENSOR_ADDRESS)
+		|| stk_sensor_outb(dev, REG_COM7, COM7_RESET)) {
+		STK_ERROR("Sensor resetting failed\n");
+		return -ENODEV;
+	}
+	msleep(10);
+	/* Read the manufacturer ID: ov = 0x7FA2 */
+	if (stk_sensor_inb(dev, REG_MIDH, &idh)
+	    || stk_sensor_inb(dev, REG_MIDL, &idl)) {
+		STK_ERROR("Strange error reading sensor ID\n");
+		return -ENODEV;
+	}
+	if (idh != 0x7F || idl != 0xA2) {
+		STK_ERROR("Huh? you don't have a sensor from ovt\n");
+		return -ENODEV;
+	}
+	if (stk_sensor_inb(dev, REG_PID, &idh)
+	    || stk_sensor_inb(dev, REG_VER, &idl)) {
+		STK_ERROR("Could not read sensor model\n");
+		return -ENODEV;
+	}
+	stk_sensor_write_regvals(dev, ov_initvals);
+	msleep(10);
+	STK_INFO("OmniVision sensor detected, id %02X%02X"
+		" at address %x\n", idh, idl, SENSOR_ADDRESS);
+	return 0;
+}
+
+/* V4L2_PIX_FMT_UYVY */
+static struct regval ov_fmt_uyvy[] = {
+	{REG_TSLB, TSLB_YLAST|0x08 },
+	{ 0x4f, 0x80 }, 	/* "matrix coefficient 1" */
+	{ 0x50, 0x80 }, 	/* "matrix coefficient 2" */
+	{ 0x51, 0    },		/* vb */
+	{ 0x52, 0x22 }, 	/* "matrix coefficient 4" */
+	{ 0x53, 0x5e }, 	/* "matrix coefficient 5" */
+	{ 0x54, 0x80 }, 	/* "matrix coefficient 6" */
+	{REG_COM13, COM13_UVSAT|COM13_CMATRIX},
+	{REG_COM15, COM15_R00FF },
+	{0xff, 0xff}, /* END MARKER */
+};
+
+/* V4L2_PIX_FMT_RGB565X rrrrrggg gggbbbbb */
+static struct regval ov_fmt_rgbr[] = {
+	{ REG_RGB444, 0 },	/* No RGB444 please */
+	{REG_TSLB, 0x00},
+	{ REG_COM1, 0x0 },
+	{ REG_COM9, 0x38 }, 	/* 16x gain ceiling; 0x8 is reserved bit */
+	{ 0x4f, 0xb3 }, 	/* "matrix coefficient 1" */
+	{ 0x50, 0xb3 }, 	/* "matrix coefficient 2" */
+	{ 0x51, 0    },		/* vb */
+	{ 0x52, 0x3d }, 	/* "matrix coefficient 4" */
+	{ 0x53, 0xa7 }, 	/* "matrix coefficient 5" */
+	{ 0x54, 0xe4 }, 	/* "matrix coefficient 6" */
+	{ REG_COM13, COM13_GAMMA },
+	{ REG_COM15, COM15_RGB565|COM15_R00FF },
+	{ 0xff, 0xff },
+};
+
+/* V4L2_PIX_FMT_RGB565 gggbbbbb rrrrrggg */
+static struct regval ov_fmt_rgbp[] = {
+	{ REG_RGB444, 0 },	/* No RGB444 please */
+	{REG_TSLB, TSLB_BYTEORD },
+	{ REG_COM1, 0x0 },
+	{ REG_COM9, 0x38 }, 	/* 16x gain ceiling; 0x8 is reserved bit */
+	{ 0x4f, 0xb3 }, 	/* "matrix coefficient 1" */
+	{ 0x50, 0xb3 }, 	/* "matrix coefficient 2" */
+	{ 0x51, 0    },		/* vb */
+	{ 0x52, 0x3d }, 	/* "matrix coefficient 4" */
+	{ 0x53, 0xa7 }, 	/* "matrix coefficient 5" */
+	{ 0x54, 0xe4 }, 	/* "matrix coefficient 6" */
+	{ REG_COM13, COM13_GAMMA },
+	{ REG_COM15, COM15_RGB565|COM15_R00FF },
+	{ 0xff, 0xff },
+};
+
+/* V4L2_PIX_FMT_SRGGB8 */
+static struct regval ov_fmt_bayer[] = {
+	/* This changes color order */
+	{REG_TSLB, 0x40}, /* BGGR */
+	/* {REG_TSLB, 0x08}, */ /* BGGR with vertical image flipping */
+	{REG_COM15, COM15_R00FF },
+	{0xff, 0xff}, /* END MARKER */
+};
+/*
+ * Store a set of start/stop values into the camera.
+ */
+static int stk_sensor_set_hw(struct stk_camera *dev,
+		int hstart, int hstop, int vstart, int vstop)
+{
+	int ret;
+	unsigned char v;
+/*
+ * Horizontal: 11 bits, top 8 live in hstart and hstop.  Bottom 3 of
+ * hstart are in href[2:0], bottom 3 of hstop in href[5:3].  There is
+ * a mystery "edge offset" value in the top two bits of href.
+ */
+	ret =  stk_sensor_outb(dev, REG_HSTART, (hstart >> 3) & 0xff);
+	ret += stk_sensor_outb(dev, REG_HSTOP, (hstop >> 3) & 0xff);
+	ret += stk_sensor_inb(dev, REG_HREF, &v);
+	v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7);
+	msleep(10);
+	ret += stk_sensor_outb(dev, REG_HREF, v);
+/*
+ * Vertical: similar arrangement (note: this is different from ov7670.c)
+ */
+	ret += stk_sensor_outb(dev, REG_VSTART, (vstart >> 3) & 0xff);
+	ret += stk_sensor_outb(dev, REG_VSTOP, (vstop >> 3) & 0xff);
+	ret += stk_sensor_inb(dev, REG_VREF, &v);
+	v = (v & 0xc0) | ((vstop & 0x7) << 3) | (vstart & 0x7);
+	msleep(10);
+	ret += stk_sensor_outb(dev, REG_VREF, v);
+	return ret;
+}
+
+
+int stk_sensor_configure(struct stk_camera *dev)
+{
+	int com7;
+	/*
+	 * We setup the sensor to output dummy lines in low-res modes,
+	 * so we don't get absurdly hight framerates.
+	 */
+	unsigned dummylines;
+	int flip;
+	struct regval *rv;
+
+	switch (dev->vsettings.mode) {
+	case MODE_QCIF: com7 = COM7_FMT_QCIF;
+		dummylines = 604;
+		break;
+	case MODE_QVGA: com7 = COM7_FMT_QVGA;
+		dummylines = 267;
+		break;
+	case MODE_CIF: com7 = COM7_FMT_CIF;
+		dummylines = 412;
+		break;
+	case MODE_VGA: com7 = COM7_FMT_VGA;
+		dummylines = 11;
+		break;
+	case MODE_SXGA: com7 = COM7_FMT_SXGA;
+		dummylines = 0;
+		break;
+	default: STK_ERROR("Unsupported mode %d\n", dev->vsettings.mode);
+		return -EFAULT;
+	}
+	switch (dev->vsettings.palette) {
+	case V4L2_PIX_FMT_UYVY:
+		com7 |= COM7_YUV;
+		rv = ov_fmt_uyvy;
+		break;
+	case V4L2_PIX_FMT_RGB565:
+		com7 |= COM7_RGB;
+		rv = ov_fmt_rgbp;
+		break;
+	case V4L2_PIX_FMT_RGB565X:
+		com7 |= COM7_RGB;
+		rv = ov_fmt_rgbr;
+		break;
+	case V4L2_PIX_FMT_SBGGR8:
+		com7 |= COM7_PBAYER;
+		rv = ov_fmt_bayer;
+		break;
+	default: STK_ERROR("Unsupported colorspace\n");
+		return -EFAULT;
+	}
+	/*FIXME sometimes the sensor go to a bad state
+	stk_sensor_write_regvals(dev, ov_initvals); */
+	stk_sensor_outb(dev, REG_COM7, com7);
+	msleep(50);
+	stk_sensor_write_regvals(dev, rv);
+	flip = (dev->vsettings.vflip?MVFP_FLIP:0)
+		| (dev->vsettings.hflip?MVFP_MIRROR:0);
+	stk_sensor_outb(dev, REG_MVFP, flip);
+	if (dev->vsettings.palette == V4L2_PIX_FMT_SBGGR8
+			&& !dev->vsettings.vflip)
+		stk_sensor_outb(dev, REG_TSLB, 0x08);
+	stk_sensor_outb(dev, REG_ADVFH, dummylines >> 8);
+	stk_sensor_outb(dev, REG_ADVFL, dummylines & 0xff);
+	msleep(50);
+	switch (dev->vsettings.mode) {
+	case MODE_VGA:
+		if (stk_sensor_set_hw(dev, 302, 1582, 6, 486))
+			STK_ERROR("stk_sensor_set_hw failed (VGA)\n");
+		break;
+	case MODE_SXGA:
+	case MODE_CIF:
+	case MODE_QVGA:
+	case MODE_QCIF:
+		/*FIXME These settings seem ignored by the sensor
+		if (stk_sensor_set_hw(dev, 220, 1500, 10, 1034))
+			STK_ERROR("stk_sensor_set_hw failed (SXGA)\n");
+		*/
+		break;
+	}
+	msleep(10);
+	return 0;
+}
+
+int stk_sensor_set_brightness(struct stk_camera *dev, int br)
+{
+	if (br < 0 || br > 0xff)
+		return -EINVAL;
+	stk_sensor_outb(dev, REG_AEB, max(0x00, br - 6));
+	stk_sensor_outb(dev, REG_AEW, min(0xff, br + 6));
+	return 0;
+}
+
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
new file mode 100644
index 00000000000..f300eca3c47
--- /dev/null
+++ b/drivers/media/video/stk-webcam.c
@@ -0,0 +1,1465 @@
+/*
+ * stk-webcam.c : Driver for Syntek 1125 USB webcam controller
+ *
+ * Copyright (C) 2006 Nicolas VIVIEN
+ * Copyright 2007-2008 Jaime Velasco Juan <jsagarribay@gmail.com>
+ *
+ * Some parts are inspired from cafe_ccic.c
+ * Copyright 2006-2007 Jonathan Corbet
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/kref.h>
+
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <linux/vmalloc.h>
+
+#include "stk-webcam.h"
+
+
+static int hflip = 1;
+module_param(hflip, bool, 0444);
+MODULE_PARM_DESC(hflip, "Horizontal image flip (mirror). Defaults to 1");
+
+static int vflip = 1;
+module_param(vflip, bool, 0444);
+MODULE_PARM_DESC(vflip, "Vertical image flip. Defaults to 1");
+
+static int debug;
+module_param(debug, int, 0444);
+MODULE_PARM_DESC(debug, "Debug v4l ioctls. Defaults to 0");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jaime Velasco Juan <jsagarribay@gmail.com> and Nicolas VIVIEN");
+MODULE_DESCRIPTION("Syntek DC1125 webcam driver");
+
+
+
+/* Some cameras have audio interfaces, we aren't interested in those */
+static struct usb_device_id stkwebcam_table[] = {
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x174f, 0xa311, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x05e1, 0x0501, 0xff, 0xff, 0xff) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, stkwebcam_table);
+
+void stk_camera_cleanup(struct kref *kref)
+{
+	struct stk_camera *dev = to_stk_camera(kref);
+
+	STK_INFO("Syntek USB2.0 Camera release resources"
+		" video device /dev/video%d\n", dev->vdev.minor);
+	video_unregister_device(&dev->vdev);
+	dev->vdev.priv = NULL;
+
+	if (dev->sio_bufs != NULL || dev->isobufs != NULL)
+		STK_ERROR("We are leaking memory\n");
+	usb_put_intf(dev->interface);
+	kfree(dev);
+}
+
+
+/*
+ * Basic stuff
+ */
+int stk_camera_write_reg(struct stk_camera *dev, u16 index, u8 value)
+{
+	struct usb_device *udev = dev->udev;
+	int ret;
+
+	ret =  usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+			0x01,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			value,
+			index,
+			NULL,
+			0,
+			500);
+	if (ret < 0)
+		return ret;
+	else
+		return 0;
+}
+
+int stk_camera_read_reg(struct stk_camera *dev, u16 index, int *value)
+{
+	struct usb_device *udev = dev->udev;
+	int ret;
+
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			0x00,
+			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			0x00,
+			index,
+			(u8 *) value,
+			sizeof(u8),
+			500);
+	if (ret < 0)
+		return ret;
+	else
+		return 0;
+}
+
+static int stk_start_stream(struct stk_camera *dev)
+{
+	int value;
+	int i, ret;
+	int value_116, value_117;
+
+	if (!is_present(dev))
+		return -ENODEV;
+	if (!is_memallocd(dev) || !is_initialised(dev)) {
+		STK_ERROR("FIXME: Buffers are not allocated\n");
+		return -EFAULT;
+	}
+	ret = usb_set_interface(dev->udev, 0, 5);
+
+	if (ret < 0)
+		STK_ERROR("usb_set_interface failed !\n");
+	if (stk_sensor_wakeup(dev))
+		STK_ERROR("error awaking the sensor\n");
+
+	stk_camera_read_reg(dev, 0x0116, &value_116);
+	stk_camera_read_reg(dev, 0x0117, &value_117);
+
+	stk_camera_write_reg(dev, 0x0116, 0x0000);
+	stk_camera_write_reg(dev, 0x0117, 0x0000);
+
+	stk_camera_read_reg(dev, 0x0100, &value);
+	stk_camera_write_reg(dev, 0x0100, value | 0x80);
+
+	stk_camera_write_reg(dev, 0x0116, value_116);
+	stk_camera_write_reg(dev, 0x0117, value_117);
+	for (i = 0; i < MAX_ISO_BUFS; i++) {
+		if (dev->isobufs[i].urb) {
+			ret = usb_submit_urb(dev->isobufs[i].urb, GFP_KERNEL);
+			atomic_inc(&dev->urbs_used);
+			if (ret)
+				return ret;
+		}
+	}
+	set_streaming(dev);
+	return 0;
+}
+
+static int stk_stop_stream(struct stk_camera *dev)
+{
+	int value;
+	int i;
+	if (is_present(dev)) {
+		stk_camera_read_reg(dev, 0x0100, &value);
+		stk_camera_write_reg(dev, 0x0100, value & ~0x80);
+		if (dev->isobufs != NULL) {
+			for (i = 0; i < MAX_ISO_BUFS; i++) {
+				if (dev->isobufs[i].urb)
+					usb_kill_urb(dev->isobufs[i].urb);
+			}
+		}
+		unset_streaming(dev);
+
+		if (usb_set_interface(dev->udev, 0, 0))
+			STK_ERROR("usb_set_interface failed !\n");
+		if (stk_sensor_sleep(dev))
+			STK_ERROR("error suspending the sensor\n");
+	}
+	return 0;
+}
+
+/*
+ * This seems to be the shortest init sequence we
+ * must do in order to find the sensor
+ * Bit 5 of reg. 0x0000 here is important, when reset to 0 the sensor
+ * is also reset. Maybe powers down it?
+ * Rest of values don't make a difference
+ */
+
+static struct regval stk1125_initvals[] = {
+	/*TODO: What means this sequence? */
+	{0x0000, 0x24},
+	{0x0100, 0x21},
+	{0x0002, 0x68},
+	{0x0003, 0x80},
+	{0x0005, 0x00},
+	{0x0007, 0x03},
+	{0x000d, 0x00},
+	{0x000f, 0x02},
+	{0x0300, 0x12},
+	{0x0350, 0x41},
+	{0x0351, 0x00},
+	{0x0352, 0x00},
+	{0x0353, 0x00},
+	{0x0018, 0x10},
+	{0x0019, 0x00},
+	{0x001b, 0x0e},
+	{0x001c, 0x46},
+	{0x0300, 0x80},
+	{0x001a, 0x04},
+	{0x0110, 0x00},
+	{0x0111, 0x00},
+	{0x0112, 0x00},
+	{0x0113, 0x00},
+
+	{0xffff, 0xff},
+};
+
+
+static int stk_initialise(struct stk_camera *dev)
+{
+	struct regval *rv;
+	int ret;
+	if (!is_present(dev))
+		return -ENODEV;
+	if (is_initialised(dev))
+		return 0;
+	rv = stk1125_initvals;
+	while (rv->reg != 0xffff) {
+		ret = stk_camera_write_reg(dev, rv->reg, rv->val);
+		if (ret)
+			return ret;
+		rv++;
+	}
+	if (stk_sensor_init(dev) == 0) {
+		set_initialised(dev);
+		return 0;
+	} else
+		return -1;
+}
+
+/* sysfs functions */
+/*FIXME cleanup this */
+
+static ssize_t show_brightness(struct device *class,
+			struct device_attribute *attr, char *buf)
+{
+	struct video_device *vdev = to_video_device(class);
+	struct stk_camera *dev = vdev_to_camera(vdev);
+
+	return sprintf(buf, "%X\n", dev->vsettings.brightness);
+}
+
+static ssize_t store_brightness(struct device *class,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	char *endp;
+	unsigned long value;
+	int ret;
+
+	struct video_device *vdev = to_video_device(class);
+	struct stk_camera *dev = vdev_to_camera(vdev);
+
+	value = simple_strtoul(buf, &endp, 16);
+
+	dev->vsettings.brightness = (int) value;
+
+	ret = stk_sensor_set_brightness(dev, value >> 8);
+	if (ret)
+		return ret;
+	else
+		return count;
+}
+
+static ssize_t show_hflip(struct device *class,
+		struct device_attribute *attr, char *buf)
+{
+	struct video_device *vdev = to_video_device(class);
+	struct stk_camera *dev = vdev_to_camera(vdev);
+
+	return sprintf(buf, "%d\n", dev->vsettings.hflip);
+}
+
+static ssize_t store_hflip(struct device *class,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct video_device *vdev = to_video_device(class);
+	struct stk_camera *dev = vdev_to_camera(vdev);
+
+	if (strncmp(buf, "1", 1) == 0)
+		dev->vsettings.hflip = 1;
+	else if (strncmp(buf, "0", 1) == 0)
+		dev->vsettings.hflip = 0;
+	else
+		return -EINVAL;
+
+	return strlen(buf);
+}
+
+static ssize_t show_vflip(struct device *class,
+		struct device_attribute *attr, char *buf)
+{
+	struct video_device *vdev = to_video_device(class);
+	struct stk_camera *dev = vdev_to_camera(vdev);
+
+	return sprintf(buf, "%d\n", dev->vsettings.vflip);
+}
+
+static ssize_t store_vflip(struct device *class,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct video_device *vdev = to_video_device(class);
+	struct stk_camera *dev = vdev_to_camera(vdev);
+
+	if (strncmp(buf, "1", 1) == 0)
+		dev->vsettings.vflip = 1;
+	else if (strncmp(buf, "0", 1) == 0)
+		dev->vsettings.vflip = 0;
+	else
+		return -EINVAL;
+
+	return strlen(buf);
+}
+
+static DEVICE_ATTR(brightness, S_IRUGO | S_IWUGO,
+			show_brightness, store_brightness);
+static DEVICE_ATTR(hflip, S_IRUGO | S_IWUGO, show_hflip, store_hflip);
+static DEVICE_ATTR(vflip, S_IRUGO | S_IWUGO, show_vflip, store_vflip);
+
+static int stk_create_sysfs_files(struct video_device *vdev)
+{
+	int ret;
+
+	ret = video_device_create_file(vdev, &dev_attr_brightness);
+	ret += video_device_create_file(vdev, &dev_attr_hflip);
+	ret += video_device_create_file(vdev, &dev_attr_vflip);
+	return ret;
+}
+
+static void stk_remove_sysfs_files(struct video_device *vdev)
+{
+	video_device_remove_file(vdev, &dev_attr_brightness);
+	video_device_remove_file(vdev, &dev_attr_hflip);
+	video_device_remove_file(vdev, &dev_attr_vflip);
+}
+
+
+/* *********************************************** */
+/*
+ * This function is called as an URB transfert is complete (Isochronous pipe).
+ * So, the traitement is done in interrupt time, so it has be fast, not crash,
+ * and not stall. Neat.
+ */
+static void stk_isoc_handler(struct urb *urb)
+{
+	int i;
+	int ret;
+	int framelen;
+	unsigned long flags;
+
+	unsigned char *fill = NULL;
+	unsigned char *iso_buf = NULL;
+
+	struct stk_camera *dev;
+	struct stk_sio_buffer *fb;
+
+	dev = (struct stk_camera *) urb->context;
+
+	if (dev == NULL) {
+		STK_ERROR("isoc_handler called with NULL device !\n");
+		return;
+	}
+
+	if (urb->status == -ENOENT || urb->status == -ECONNRESET
+		|| urb->status == -ESHUTDOWN) {
+		atomic_dec(&dev->urbs_used);
+		return;
+	}
+
+	spin_lock_irqsave(&dev->spinlock, flags);
+
+	if (urb->status != -EINPROGRESS && urb->status != 0) {
+		STK_ERROR("isoc_handler: urb->status == %d\n", urb->status);
+		goto resubmit;
+	}
+
+	if (list_empty(&dev->sio_avail)) {
+		/*FIXME Stop streaming after a while */
+		(void) (printk_ratelimit() &&
+		STK_ERROR("isoc_handler without available buffer!\n"));
+		goto resubmit;
+	}
+	fb = list_first_entry(&dev->sio_avail,
+			struct stk_sio_buffer, list);
+	fill = fb->buffer + fb->v4lbuf.bytesused;
+
+	for (i = 0; i < urb->number_of_packets; i++) {
+		if (urb->iso_frame_desc[i].status != 0) {
+			if (urb->iso_frame_desc[i].status != -EXDEV)
+				STK_ERROR("Frame %d has error %d\n", i,
+					urb->iso_frame_desc[i].status);
+			continue;
+		}
+		framelen = urb->iso_frame_desc[i].actual_length;
+		iso_buf = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+
+		if (framelen <= 4)
+			continue; /* no data */
+
+		/*
+		 * we found something informational from there
+		 * the isoc frames have to type of headers
+		 * type1: 00 xx 00 00 or 20 xx 00 00
+		 * type2: 80 xx 00 00 00 00 00 00 or a0 xx 00 00 00 00 00 00
+		 * xx is a sequencer which has never been seen over 0x3f
+		 * imho data written down looks like bayer, i see similarities
+		 * after every 640 bytes
+		 */
+		if (*iso_buf & 0x80) {
+			framelen -= 8;
+			iso_buf += 8;
+			/* This marks a new frame */
+			if (fb->v4lbuf.bytesused != 0
+				&& fb->v4lbuf.bytesused != dev->frame_size) {
+				(void) (printk_ratelimit() &&
+				STK_ERROR("frame %d, "
+					"bytesused=%d, skipping\n",
+					i, fb->v4lbuf.bytesused));
+				fb->v4lbuf.bytesused = 0;
+				fill = fb->buffer;
+			} else if (fb->v4lbuf.bytesused == dev->frame_size) {
+				list_move_tail(dev->sio_avail.next,
+					&dev->sio_full);
+				wake_up(&dev->wait_frame);
+				if (list_empty(&dev->sio_avail)) {
+					(void) (printk_ratelimit() &&
+					STK_ERROR("No buffer available\n"));
+					goto resubmit;
+				}
+				fb = list_first_entry(&dev->sio_avail,
+					struct stk_sio_buffer, list);
+				fb->v4lbuf.bytesused = 0;
+				fill = fb->buffer;
+			}
+		} else {
+			framelen -= 4;
+			iso_buf += 4;
+		}
+
+		/* Our buffer is full !!! */
+		if (framelen + fb->v4lbuf.bytesused > dev->frame_size) {
+			(void) (printk_ratelimit() &&
+			STK_ERROR("Frame buffer overflow, lost sync\n"));
+			/*FIXME Do something here? */
+			continue;
+		}
+		spin_unlock_irqrestore(&dev->spinlock, flags);
+		memcpy(fill, iso_buf, framelen);
+		spin_lock_irqsave(&dev->spinlock, flags);
+		fill += framelen;
+
+		/* New size of our buffer */
+		fb->v4lbuf.bytesused += framelen;
+	}
+
+resubmit:
+	spin_unlock_irqrestore(&dev->spinlock, flags);
+	urb->dev = dev->udev;
+	ret = usb_submit_urb(urb, GFP_ATOMIC);
+	if (ret != 0) {
+		STK_ERROR("Error (%d) re-submitting urb in stk_isoc_handler.\n",
+			ret);
+	}
+}
+
+/* -------------------------------------------- */
+
+static int stk_prepare_iso(struct stk_camera *dev)
+{
+	void *kbuf;
+	int i, j;
+	struct urb *urb;
+	struct usb_device *udev;
+
+	if (dev == NULL)
+		return -ENXIO;
+	udev = dev->udev;
+
+	if (dev->isobufs)
+		STK_ERROR("isobufs already allocated. Bad\n");
+	else
+		dev->isobufs = kzalloc(MAX_ISO_BUFS * sizeof(*dev->isobufs),
+					GFP_KERNEL);
+	if (dev->isobufs == NULL) {
+		STK_ERROR("Unable to allocate iso buffers\n");
+		return -ENOMEM;
+	}
+	for (i = 0; i < MAX_ISO_BUFS; i++) {
+		if (dev->isobufs[i].data == NULL) {
+			kbuf = kzalloc(ISO_BUFFER_SIZE, GFP_KERNEL);
+			if (kbuf == NULL) {
+				STK_ERROR("Failed to allocate iso buffer %d\n",
+					i);
+				goto isobufs_out;
+			}
+			dev->isobufs[i].data = kbuf;
+		} else
+			STK_ERROR("isobuf data already allocated\n");
+		if (dev->isobufs[i].urb == NULL) {
+			urb = usb_alloc_urb(ISO_FRAMES_PER_DESC, GFP_KERNEL);
+			if (urb == NULL) {
+				STK_ERROR("Failed to allocate URB %d\n", i);
+				goto isobufs_out;
+			}
+			dev->isobufs[i].urb = urb;
+		} else {
+			STK_ERROR("Killing URB\n");
+			usb_kill_urb(dev->isobufs[i].urb);
+			urb = dev->isobufs[i].urb;
+		}
+		urb->interval = 1;
+		urb->dev = udev;
+		urb->pipe = usb_rcvisocpipe(udev, dev->isoc_ep);
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->transfer_buffer = dev->isobufs[i].data;
+		urb->transfer_buffer_length = ISO_BUFFER_SIZE;
+		urb->complete = stk_isoc_handler;
+		urb->context = dev;
+		urb->start_frame = 0;
+		urb->number_of_packets = ISO_FRAMES_PER_DESC;
+
+		for (j = 0; j < ISO_FRAMES_PER_DESC; j++) {
+			urb->iso_frame_desc[j].offset = j * ISO_MAX_FRAME_SIZE;
+			urb->iso_frame_desc[j].length = ISO_MAX_FRAME_SIZE;
+		}
+	}
+	set_memallocd(dev);
+	return 0;
+
+isobufs_out:
+	for (i = 0; i < MAX_ISO_BUFS && dev->isobufs[i].data; i++)
+		kfree(dev->isobufs[i].data);
+	for (i = 0; i < MAX_ISO_BUFS && dev->isobufs[i].urb; i++)
+		usb_free_urb(dev->isobufs[i].urb);
+	kfree(dev->isobufs);
+	dev->isobufs = NULL;
+	return -ENOMEM;
+}
+
+static void stk_clean_iso(struct stk_camera *dev)
+{
+	int i;
+
+	if (dev == NULL || dev->isobufs == NULL)
+		return;
+
+	for (i = 0; i < MAX_ISO_BUFS; i++) {
+		struct urb *urb;
+
+		urb = dev->isobufs[i].urb;
+		if (urb) {
+			if (atomic_read(&dev->urbs_used))
+				usb_kill_urb(urb);
+			usb_free_urb(urb);
+		}
+		kfree(dev->isobufs[i].data);
+	}
+	kfree(dev->isobufs);
+	dev->isobufs = NULL;
+	unset_memallocd(dev);
+}
+
+static int stk_setup_siobuf(struct stk_camera *dev, int index)
+{
+	struct stk_sio_buffer *buf = dev->sio_bufs + index;
+	INIT_LIST_HEAD(&buf->list);
+	buf->v4lbuf.length = PAGE_ALIGN(dev->frame_size);
+	buf->buffer = vmalloc_user(buf->v4lbuf.length);
+	if (buf->buffer == NULL)
+		return -ENOMEM;
+	buf->mapcount = 0;
+	buf->dev = dev;
+	buf->v4lbuf.index = index;
+	buf->v4lbuf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	buf->v4lbuf.field = V4L2_FIELD_NONE;
+	buf->v4lbuf.memory = V4L2_MEMORY_MMAP;
+	buf->v4lbuf.m.offset = 2*index*buf->v4lbuf.length;
+	return 0;
+}
+
+static int stk_free_sio_buffers(struct stk_camera *dev)
+{
+	int i;
+	int nbufs;
+	unsigned long flags;
+	if (dev->n_sbufs == 0 || dev->sio_bufs == NULL)
+		return 0;
+	/*
+	* If any buffers are mapped, we cannot free them at all.
+	*/
+	for (i = 0; i < dev->n_sbufs; i++) {
+		if (dev->sio_bufs[i].mapcount > 0)
+			return -EBUSY;
+	}
+	/*
+	* OK, let's do it.
+	*/
+	spin_lock_irqsave(&dev->spinlock, flags);
+	INIT_LIST_HEAD(&dev->sio_avail);
+	INIT_LIST_HEAD(&dev->sio_full);
+	nbufs = dev->n_sbufs;
+	dev->n_sbufs = 0;
+	spin_unlock_irqrestore(&dev->spinlock, flags);
+	for (i = 0; i < nbufs; i++) {
+		if (dev->sio_bufs[i].buffer != NULL)
+			vfree(dev->sio_bufs[i].buffer);
+	}
+	kfree(dev->sio_bufs);
+	dev->sio_bufs = NULL;
+	return 0;
+}
+
+static int stk_prepare_sio_buffers(struct stk_camera *dev, unsigned n_sbufs)
+{
+	int i;
+	if (dev->sio_bufs != NULL)
+		STK_ERROR("sio_bufs already allocated\n");
+	else {
+		dev->sio_bufs = kzalloc(n_sbufs * sizeof(struct stk_sio_buffer),
+				GFP_KERNEL);
+		if (dev->sio_bufs == NULL)
+			return -ENOMEM;
+		for (i = 0; i < n_sbufs; i++) {
+			if (stk_setup_siobuf(dev, i))
+				return (dev->n_sbufs > 1)? 0 : -ENOMEM;
+			dev->n_sbufs = i+1;
+		}
+	}
+	return 0;
+}
+
+static int stk_allocate_buffers(struct stk_camera *dev, unsigned n_sbufs)
+{
+	int err;
+	err = stk_prepare_iso(dev);
+	if (err) {
+		stk_clean_iso(dev);
+		return err;
+	}
+	err = stk_prepare_sio_buffers(dev, n_sbufs);
+	if (err) {
+		stk_free_sio_buffers(dev);
+		return err;
+	}
+	return 0;
+}
+
+static void stk_free_buffers(struct stk_camera *dev)
+{
+	stk_clean_iso(dev);
+	stk_free_sio_buffers(dev);
+}
+/* -------------------------------------------- */
+
+/* v4l file operations */
+
+static int v4l_stk_open(struct inode *inode, struct file *fp)
+{
+	struct stk_camera *dev;
+	struct video_device *vdev;
+
+	vdev = video_devdata(fp);
+	dev = vdev_to_camera(vdev);
+
+	if (dev == NULL || !is_present(dev))
+		return -ENXIO;
+	fp->private_data = vdev;
+	kref_get(&dev->kref);
+
+	return 0;
+}
+
+static int v4l_stk_release(struct inode *inode, struct file *fp)
+{
+	struct stk_camera *dev;
+	struct video_device *vdev;
+
+	vdev = video_devdata(fp);
+	if (vdev == NULL) {
+		STK_ERROR("v4l_release called w/o video devdata\n");
+		return -EFAULT;
+	}
+	dev = vdev_to_camera(vdev);
+	if (dev == NULL) {
+		STK_ERROR("v4l_release called on removed device\n");
+		return -ENODEV;
+	}
+
+	if (dev->owner != fp) {
+		kref_put(&dev->kref, stk_camera_cleanup);
+		return 0;
+	}
+
+	stk_stop_stream(dev);
+
+	stk_free_buffers(dev);
+
+	dev->owner = NULL;
+
+	kref_put(&dev->kref, stk_camera_cleanup);
+
+	return 0;
+}
+
+static ssize_t v4l_stk_read(struct file *fp, char __user *buf,
+		size_t count, loff_t *f_pos)
+{
+	int i;
+	int ret;
+	unsigned long flags;
+	struct stk_camera *dev;
+	struct video_device *vdev;
+	struct stk_sio_buffer *sbuf;
+
+	vdev = video_devdata(fp);
+	if (vdev == NULL)
+		return -EFAULT;
+	dev = vdev_to_camera(vdev);
+
+	if (dev == NULL)
+		return -EIO;
+
+	if (!is_present(dev))
+		return -EIO;
+	if (dev->owner && dev->owner != fp)
+		return -EBUSY;
+	dev->owner = fp;
+	if (!is_streaming(dev)) {
+		if (stk_initialise(dev)
+			|| stk_allocate_buffers(dev, 3)
+			|| stk_start_stream(dev))
+			return -ENOMEM;
+		spin_lock_irqsave(&dev->spinlock, flags);
+		for (i = 0; i < dev->n_sbufs; i++) {
+			list_add_tail(&dev->sio_bufs[i].list, &dev->sio_avail);
+			dev->sio_bufs[i].v4lbuf.flags = V4L2_BUF_FLAG_QUEUED;
+		}
+		spin_unlock_irqrestore(&dev->spinlock, flags);
+	}
+	if (*f_pos == 0) {
+		if (fp->f_flags & O_NONBLOCK && list_empty(&dev->sio_full))
+			return -EWOULDBLOCK;
+		ret = wait_event_interruptible(dev->wait_frame,
+			!list_empty(&dev->sio_full) || !is_present(dev));
+		if (ret)
+			return ret;
+		if (!is_present(dev))
+			return -EIO;
+	}
+	if (count + *f_pos > dev->frame_size)
+		count = dev->frame_size - *f_pos;
+	spin_lock_irqsave(&dev->spinlock, flags);
+	if (list_empty(&dev->sio_full)) {
+		spin_unlock_irqrestore(&dev->spinlock, flags);
+		STK_ERROR("BUG: No siobufs ready\n");
+		return 0;
+	}
+	sbuf = list_first_entry(&dev->sio_full, struct stk_sio_buffer, list);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
+
+	if (copy_to_user(buf, sbuf->buffer + *f_pos, count))
+		return -EFAULT;
+
+	*f_pos += count;
+
+	if (*f_pos >= dev->frame_size) {
+		*f_pos = 0;
+		spin_lock_irqsave(&dev->spinlock, flags);
+		list_move_tail(&sbuf->list, &dev->sio_avail);
+		spin_unlock_irqrestore(&dev->spinlock, flags);
+	}
+	return count;
+}
+
+static unsigned int v4l_stk_poll(struct file *fp, poll_table *wait)
+{
+	struct stk_camera *dev;
+	struct video_device *vdev;
+
+	vdev = video_devdata(fp);
+
+	if (vdev == NULL)
+		return -EFAULT;
+
+	dev = vdev_to_camera(vdev);
+	if (dev == NULL)
+		return -ENODEV;
+
+	poll_wait(fp, &dev->wait_frame, wait);
+
+	if (!is_present(dev))
+		return POLLERR;
+
+	if (!list_empty(&dev->sio_full))
+		return (POLLIN | POLLRDNORM);
+
+	return 0;
+}
+
+
+static void stk_v4l_vm_open(struct vm_area_struct *vma)
+{
+	struct stk_sio_buffer *sbuf = vma->vm_private_data;
+	sbuf->mapcount++;
+}
+static void stk_v4l_vm_close(struct vm_area_struct *vma)
+{
+	struct stk_sio_buffer *sbuf = vma->vm_private_data;
+	sbuf->mapcount--;
+	if (sbuf->mapcount == 0)
+		sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_MAPPED;
+}
+static struct vm_operations_struct stk_v4l_vm_ops = {
+	.open = stk_v4l_vm_open,
+	.close = stk_v4l_vm_close
+};
+
+static int v4l_stk_mmap(struct file *fp, struct vm_area_struct *vma)
+{
+	unsigned int i;
+	int ret;
+	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	struct stk_camera *dev;
+	struct video_device *vdev;
+	struct stk_sio_buffer *sbuf = NULL;
+
+	if (!(vma->vm_flags & VM_WRITE) || !(vma->vm_flags & VM_SHARED))
+		return -EINVAL;
+
+	vdev = video_devdata(fp);
+	dev = vdev_to_camera(vdev);
+
+	for (i = 0; i < dev->n_sbufs; i++) {
+		if (dev->sio_bufs[i].v4lbuf.m.offset == offset) {
+			sbuf = dev->sio_bufs + i;
+			break;
+		}
+	}
+	if (sbuf == NULL)
+		return -EINVAL;
+	ret = remap_vmalloc_range(vma, sbuf->buffer, 0);
+	if (ret)
+		return ret;
+	vma->vm_flags |= VM_DONTEXPAND;
+	vma->vm_private_data = sbuf;
+	vma->vm_ops = &stk_v4l_vm_ops;
+	sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_MAPPED;
+	stk_v4l_vm_open(vma);
+	return 0;
+}
+
+/* v4l ioctl handlers */
+
+static int stk_vidioc_querycap(struct file *filp,
+		void *priv, struct v4l2_capability *cap)
+{
+	strcpy(cap->driver, "stk");
+	strcpy(cap->card, "stk");
+	cap->version = DRIVER_VERSION_NUM;
+
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
+		| V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
+	return 0;
+}
+
+static int stk_vidioc_enum_input(struct file *filp,
+		void *priv, struct v4l2_input *input)
+{
+	if (input->index != 0)
+		return -EINVAL;
+
+	strcpy(input->name, "Syntek USB Camera");
+	input->type = V4L2_INPUT_TYPE_CAMERA;
+	return 0;
+}
+
+
+static int stk_vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
+{
+	*i = 0;
+	return 0;
+}
+
+static int stk_vidioc_s_input(struct file *filp, void *priv, unsigned int i)
+{
+	if (i != 0)
+		return -EINVAL;
+	else
+		return 0;
+}
+
+/* from vivi.c */
+static int stk_vidioc_s_std(struct file *filp, void *priv, v4l2_std_id *a)
+{
+	return 0;
+}
+
+/* List of all V4Lv2 controls supported by the driver */
+static struct v4l2_queryctrl stk_controls[] = {
+	{
+		.id      = V4L2_CID_BRIGHTNESS,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Brightness",
+		.minimum = 0,
+		.maximum = 0xffff,
+		.step    = 0x0100,
+		.default_value = 0x6000,
+	},
+	/*TODO: get more controls to work */
+};
+
+static int stk_vidioc_queryctrl(struct file *filp,
+		void *priv, struct v4l2_queryctrl *c)
+{
+	int i;
+	int nbr;
+	nbr = ARRAY_SIZE(stk_controls);
+
+	for (i = 0; i < nbr; i++) {
+		if (stk_controls[i].id == c->id) {
+			memcpy(c, &stk_controls[i],
+				sizeof(struct v4l2_queryctrl));
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+static int stk_vidioc_g_ctrl(struct file *filp,
+		void *priv, struct v4l2_control *c)
+{
+	struct stk_camera *dev = priv;
+	switch (c->id) {
+	case V4L2_CID_BRIGHTNESS:
+		c->value = dev->vsettings.brightness;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int stk_vidioc_s_ctrl(struct file *filp,
+		void *priv, struct v4l2_control *c)
+{
+	struct stk_camera *dev = priv;
+	switch (c->id) {
+	case V4L2_CID_BRIGHTNESS:
+		dev->vsettings.brightness = c->value;
+		return stk_sensor_set_brightness(dev, c->value >> 8);
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+
+static int stk_vidioc_enum_fmt_cap(struct file *filp,
+		void *priv, struct v4l2_fmtdesc *fmtd)
+{
+	fmtd->flags = 0;
+
+	switch (fmtd->index) {
+	case 0:
+		fmtd->pixelformat = V4L2_PIX_FMT_RGB565;
+		strcpy(fmtd->description, "r5g6b5");
+		break;
+	case 1:
+		fmtd->pixelformat = V4L2_PIX_FMT_RGB565X;
+		strcpy(fmtd->description, "r5g6b5BE");
+		break;
+	case 2:
+		fmtd->pixelformat = V4L2_PIX_FMT_UYVY;
+		strcpy(fmtd->description, "yuv4:2:2");
+		break;
+	case 3:
+		fmtd->pixelformat = V4L2_PIX_FMT_SBGGR8;
+		strcpy(fmtd->description, "Raw bayer");
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct stk_size {
+	unsigned w;
+	unsigned h;
+	enum stk_mode m;
+} stk_sizes[] = {
+	{ .w = 1280, .h = 1024, .m = MODE_SXGA, },
+	{ .w = 640,  .h = 480,  .m = MODE_VGA,  },
+	{ .w = 352,  .h = 288,  .m = MODE_CIF,  },
+	{ .w = 320,  .h = 240,  .m = MODE_QVGA, },
+	{ .w = 176,  .h = 144,  .m = MODE_QCIF, },
+};
+
+static int stk_vidioc_g_fmt_cap(struct file *filp,
+		void *priv, struct v4l2_format *f)
+{
+	struct v4l2_pix_format *pix_format = &f->fmt.pix;
+	struct stk_camera *dev = priv;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(stk_sizes)
+			&& stk_sizes[i].m != dev->vsettings.mode;
+		i++);
+	if (i == ARRAY_SIZE(stk_sizes)) {
+		STK_ERROR("ERROR: mode invalid\n");
+		return -EINVAL;
+	}
+	pix_format->width = stk_sizes[i].w;
+	pix_format->height = stk_sizes[i].h;
+	pix_format->field = V4L2_FIELD_NONE;
+	pix_format->colorspace = V4L2_COLORSPACE_SRGB;
+	pix_format->priv = 0;
+	pix_format->pixelformat = dev->vsettings.palette;
+	if (dev->vsettings.palette == V4L2_PIX_FMT_SBGGR8)
+		pix_format->bytesperline = pix_format->width;
+	else
+		pix_format->bytesperline = 2 * pix_format->width;
+	pix_format->sizeimage = pix_format->bytesperline
+				* pix_format->height;
+	return 0;
+}
+
+static int stk_vidioc_try_fmt_cap(struct file *filp,
+		void *priv, struct v4l2_format *fmtd)
+{
+	int i;
+	switch (fmtd->fmt.pix.pixelformat) {
+	case V4L2_PIX_FMT_RGB565:
+	case V4L2_PIX_FMT_RGB565X:
+	case V4L2_PIX_FMT_UYVY:
+	case V4L2_PIX_FMT_SBGGR8:
+		break;
+	default:
+		return -EINVAL;
+	}
+	for (i = 1; i < ARRAY_SIZE(stk_sizes); i++) {
+		if (fmtd->fmt.pix.width > stk_sizes[i].w)
+			break;
+	}
+	if (i == ARRAY_SIZE(stk_sizes)
+		|| (abs(fmtd->fmt.pix.width - stk_sizes[i-1].w)
+			< abs(fmtd->fmt.pix.width - stk_sizes[i].w))) {
+		fmtd->fmt.pix.height = stk_sizes[i-1].h;
+		fmtd->fmt.pix.width = stk_sizes[i-1].w;
+		fmtd->fmt.pix.priv = i - 1;
+	} else {
+		fmtd->fmt.pix.height = stk_sizes[i].h;
+		fmtd->fmt.pix.width = stk_sizes[i].w;
+		fmtd->fmt.pix.priv = i;
+	}
+
+	fmtd->fmt.pix.field = V4L2_FIELD_NONE;
+	fmtd->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
+	if (fmtd->fmt.pix.pixelformat == V4L2_PIX_FMT_SBGGR8)
+		fmtd->fmt.pix.bytesperline = fmtd->fmt.pix.width;
+	else
+		fmtd->fmt.pix.bytesperline = 2 * fmtd->fmt.pix.width;
+	fmtd->fmt.pix.sizeimage = fmtd->fmt.pix.bytesperline
+		* fmtd->fmt.pix.height;
+	return 0;
+}
+
+static int stk_vidioc_s_fmt_cap(struct file *filp,
+		void *priv, struct v4l2_format *fmtd)
+{
+	int ret;
+	struct stk_camera *dev = priv;
+
+	if (dev == NULL)
+		return -ENODEV;
+	if (!is_present(dev))
+		return -ENODEV;
+	if (is_streaming(dev))
+		return -EBUSY;
+	if (dev->owner && dev->owner != filp)
+		return -EBUSY;
+	dev->owner = filp;
+	ret = stk_vidioc_try_fmt_cap(filp, priv, fmtd);
+	if (ret)
+		return ret;
+
+	dev->vsettings.palette = fmtd->fmt.pix.pixelformat;
+	stk_free_buffers(dev);
+	dev->frame_size = fmtd->fmt.pix.sizeimage;
+	dev->vsettings.mode = stk_sizes[fmtd->fmt.pix.priv].m;
+
+	stk_initialise(dev);
+	/* This registers controls some timings, not sure of what. */
+	stk_camera_write_reg(dev, 0x001b, 0x0e);
+	if (dev->vsettings.mode == MODE_SXGA)
+		stk_camera_write_reg(dev, 0x001c, 0x0e);
+	else
+		stk_camera_write_reg(dev, 0x001c, 0x46);
+	/*
+	 * Registers 0x0115 0x0114 are the size of each line (bytes),
+	 * regs 0x0117 0x0116 are the heigth of the image.
+	 */
+	stk_camera_write_reg(dev, 0x0115,
+		(fmtd->fmt.pix.bytesperline >> 8) & 0xff);
+	stk_camera_write_reg(dev, 0x0114,
+		fmtd->fmt.pix.bytesperline & 0xff);
+	stk_camera_write_reg(dev, 0x0117,
+		(fmtd->fmt.pix.height >> 8) & 0xff);
+	stk_camera_write_reg(dev, 0x0116,
+		fmtd->fmt.pix.height & 0xff);
+	return stk_sensor_configure(dev);
+}
+
+static int stk_vidioc_reqbufs(struct file *filp,
+		void *priv, struct v4l2_requestbuffers *rb)
+{
+	struct stk_camera *dev = priv;
+
+	if (dev == NULL)
+		return -ENODEV;
+	if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	if (rb->memory != V4L2_MEMORY_MMAP)
+		return -EINVAL;
+	if (is_streaming(dev)
+		|| (dev->owner && dev->owner != filp))
+		return -EBUSY;
+	dev->owner = filp;
+
+	/*FIXME If they ask for zero, we must stop streaming and free */
+	if (rb->count < 3)
+		rb->count = 3;
+	/* Arbitrary limit */
+	else if (rb->count > 5)
+		rb->count = 5;
+
+	stk_allocate_buffers(dev, rb->count);
+	rb->count = dev->n_sbufs;
+	return 0;
+}
+
+static int stk_vidioc_querybuf(struct file *filp,
+		void *priv, struct v4l2_buffer *buf)
+{
+	int index;
+	struct stk_camera *dev = priv;
+	struct stk_sio_buffer *sbuf;
+
+	if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	index = buf->index;
+
+	if (index < 0 || index >= dev->n_sbufs)
+		return -EINVAL;
+	sbuf = dev->sio_bufs + buf->index;
+	*buf = sbuf->v4lbuf;
+	return 0;
+}
+
+static int stk_vidioc_qbuf(struct file *filp,
+		void *priv, struct v4l2_buffer *buf)
+{
+	struct stk_camera *dev = priv;
+	struct stk_sio_buffer *sbuf;
+	unsigned long flags;
+	if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	if (buf->memory != V4L2_MEMORY_MMAP)
+		return -EINVAL;
+
+	if (buf->index < 0 || buf->index >= dev->n_sbufs)
+		return -EINVAL;
+	sbuf = dev->sio_bufs + buf->index;
+	if (sbuf->v4lbuf.flags & V4L2_BUF_FLAG_QUEUED)
+		return 0;
+	sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_QUEUED;
+	sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_DONE;
+	spin_lock_irqsave(&dev->spinlock, flags);
+	list_add_tail(&sbuf->list, &dev->sio_avail);
+	*buf = sbuf->v4lbuf;
+	spin_unlock_irqrestore(&dev->spinlock, flags);
+	return 0;
+}
+
+static int stk_vidioc_dqbuf(struct file *filp,
+		void *priv, struct v4l2_buffer *buf)
+{
+	struct stk_camera *dev = priv;
+	struct stk_sio_buffer *sbuf;
+	unsigned long flags;
+	int ret;
+
+	if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE
+		|| !is_streaming(dev))
+		return -EINVAL;
+
+	if (filp->f_flags & O_NONBLOCK && list_empty(&dev->sio_full))
+		return -EWOULDBLOCK;
+	ret = wait_event_interruptible(dev->wait_frame,
+		!list_empty(&dev->sio_full) || !is_present(dev));
+	if (ret)
+		return ret;
+	if (!is_present(dev))
+		return -EIO;
+
+	spin_lock_irqsave(&dev->spinlock, flags);
+	sbuf = list_first_entry(&dev->sio_full, struct stk_sio_buffer, list);
+	list_del_init(&sbuf->list);
+	spin_unlock_irqrestore(&dev->spinlock, flags);
+	sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_QUEUED;
+	sbuf->v4lbuf.flags |= V4L2_BUF_FLAG_DONE;
+	sbuf->v4lbuf.sequence = ++dev->sequence;
+	do_gettimeofday(&sbuf->v4lbuf.timestamp);
+
+	*buf = sbuf->v4lbuf;
+	return 0;
+}
+
+static int stk_vidioc_streamon(struct file *filp,
+		void *priv, enum v4l2_buf_type type)
+{
+	struct stk_camera *dev = priv;
+	if (is_streaming(dev))
+		return 0;
+	if (dev->sio_bufs == NULL)
+		return -EINVAL;
+	dev->sequence = 0;
+	return stk_start_stream(dev);
+}
+
+static int stk_vidioc_streamoff(struct file *filp,
+		void *priv, enum v4l2_buf_type type)
+{
+	struct stk_camera *dev = priv;
+	unsigned long flags;
+	int i;
+	stk_stop_stream(dev);
+	spin_lock_irqsave(&dev->spinlock, flags);
+	INIT_LIST_HEAD(&dev->sio_avail);
+	INIT_LIST_HEAD(&dev->sio_full);
+	for (i = 0; i < dev->n_sbufs; i++) {
+		INIT_LIST_HEAD(&dev->sio_bufs[i].list);
+		dev->sio_bufs[i].v4lbuf.flags = 0;
+	}
+	spin_unlock_irqrestore(&dev->spinlock, flags);
+	return 0;
+}
+
+
+static int stk_vidioc_g_parm(struct file *filp,
+		void *priv, struct v4l2_streamparm *sp)
+{
+	if (sp->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	sp->parm.capture.capability = 0;
+	sp->parm.capture.capturemode = 0;
+	/*FIXME This is not correct */
+	sp->parm.capture.timeperframe.numerator = 1;
+	sp->parm.capture.timeperframe.denominator = 30;
+	sp->parm.capture.readbuffers = 2;
+	sp->parm.capture.extendedmode = 0;
+	return 0;
+}
+
+static struct file_operations v4l_stk_fops = {
+	.owner = THIS_MODULE,
+	.open = v4l_stk_open,
+	.release = v4l_stk_release,
+	.read = v4l_stk_read,
+	.poll = v4l_stk_poll,
+	.mmap = v4l_stk_mmap,
+	.ioctl = video_ioctl2,
+	.llseek = no_llseek
+};
+
+static void stk_v4l_dev_release(struct video_device *vd)
+{
+}
+
+static struct video_device stk_v4l_data = {
+	.name = "stkwebcam",
+	.type = VFL_TYPE_GRABBER,
+	.type2 = VID_TYPE_CAPTURE,
+	.minor = -1,
+	.tvnorms = V4L2_STD_UNKNOWN,
+	.current_norm = V4L2_STD_UNKNOWN,
+	.fops = &v4l_stk_fops,
+	.release = stk_v4l_dev_release,
+
+	.vidioc_querycap = stk_vidioc_querycap,
+	.vidioc_enum_fmt_cap = stk_vidioc_enum_fmt_cap,
+	.vidioc_try_fmt_cap = stk_vidioc_try_fmt_cap,
+	.vidioc_s_fmt_cap = stk_vidioc_s_fmt_cap,
+	.vidioc_g_fmt_cap = stk_vidioc_g_fmt_cap,
+	.vidioc_enum_input = stk_vidioc_enum_input,
+	.vidioc_s_input = stk_vidioc_s_input,
+	.vidioc_g_input = stk_vidioc_g_input,
+	.vidioc_s_std = stk_vidioc_s_std,
+	.vidioc_reqbufs = stk_vidioc_reqbufs,
+	.vidioc_querybuf = stk_vidioc_querybuf,
+	.vidioc_qbuf = stk_vidioc_qbuf,
+	.vidioc_dqbuf = stk_vidioc_dqbuf,
+	.vidioc_streamon = stk_vidioc_streamon,
+	.vidioc_streamoff = stk_vidioc_streamoff,
+	.vidioc_queryctrl = stk_vidioc_queryctrl,
+	.vidioc_g_ctrl = stk_vidioc_g_ctrl,
+	.vidioc_s_ctrl = stk_vidioc_s_ctrl,
+	.vidioc_g_parm = stk_vidioc_g_parm,
+};
+
+
+static int stk_register_video_device(struct stk_camera *dev)
+{
+	int err;
+
+	dev->vdev = stk_v4l_data;
+	dev->vdev.debug = debug;
+	dev->vdev.dev = &dev->interface->dev;
+	dev->vdev.priv = dev;
+	err = video_register_device(&dev->vdev, VFL_TYPE_GRABBER, -1);
+	if (err)
+		STK_ERROR("v4l registration failed\n");
+	else
+		STK_INFO("Syntek USB2.0 Camera is now controlling video device"
+			" /dev/video%d\n", dev->vdev.minor);
+	return err;
+}
+
+
+/* USB Stuff */
+
+static int stk_camera_probe(struct usb_interface *interface,
+		const struct usb_device_id *id)
+{
+	int i;
+	int err;
+
+	struct stk_camera *dev = NULL;
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+
+	dev = kzalloc(sizeof(struct stk_camera), GFP_KERNEL);
+	if (dev == NULL) {
+		STK_ERROR("Out of memory !\n");
+		return -ENOMEM;
+	}
+
+	kref_init(&dev->kref);
+	spin_lock_init(&dev->spinlock);
+	init_waitqueue_head(&dev->wait_frame);
+
+	dev->udev = udev;
+	dev->interface = interface;
+	usb_get_intf(interface);
+
+	dev->vsettings.vflip = vflip;
+	dev->vsettings.hflip = hflip;
+	dev->n_sbufs = 0;
+	set_present(dev);
+
+	/* Set up the endpoint information
+	 * use only the first isoc-in endpoint
+	 * for the current alternate setting */
+	iface_desc = interface->cur_altsetting;
+
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+		endpoint = &iface_desc->endpoint[i].desc;
+
+		if (!dev->isoc_ep
+			&& ((endpoint->bEndpointAddress
+				& USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
+			&& ((endpoint->bmAttributes
+				& USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_ISOC)) {
+			/* we found an isoc in endpoint */
+			dev->isoc_ep = (endpoint->bEndpointAddress & 0xF);
+			break;
+		}
+	}
+	if (!dev->isoc_ep) {
+		STK_ERROR("Could not find isoc-in endpoint");
+		kref_put(&dev->kref, stk_camera_cleanup);
+		return -ENODEV;
+	}
+	dev->vsettings.brightness = 0x7fff;
+	dev->vsettings.palette = V4L2_PIX_FMT_RGB565;
+	dev->vsettings.mode = MODE_VGA;
+	dev->frame_size = 640*480*2;
+
+	INIT_LIST_HEAD(&dev->sio_avail);
+	INIT_LIST_HEAD(&dev->sio_full);
+
+	usb_set_intfdata(interface, dev);
+
+	err = stk_register_video_device(dev);
+	if (err) {
+		kref_put(&dev->kref, stk_camera_cleanup);
+		return err;
+	}
+
+	stk_create_sysfs_files(&dev->vdev);
+
+	return 0;
+}
+
+static void stk_camera_disconnect(struct usb_interface *interface)
+{
+	struct stk_camera *dev = usb_get_intfdata(interface);
+
+	usb_set_intfdata(interface, NULL);
+	unset_present(dev);
+
+	wake_up_interruptible(&dev->wait_frame);
+	stk_remove_sysfs_files(&dev->vdev);
+
+	kref_put(&dev->kref, stk_camera_cleanup);
+}
+
+static struct usb_driver stk_camera_driver = {
+	.name = "stkwebcam",
+	.probe = stk_camera_probe,
+	.disconnect = stk_camera_disconnect,
+	.id_table = stkwebcam_table,
+};
+
+
+static int __init stk_camera_init(void)
+{
+	int result;
+
+	result = usb_register(&stk_camera_driver);
+	if (result)
+		STK_ERROR("usb_register failed ! Error number %d\n", result);
+
+
+	return result;
+}
+
+static void __exit stk_camera_exit(void)
+{
+	usb_deregister(&stk_camera_driver);
+}
+
+module_init(stk_camera_init);
+module_exit(stk_camera_exit);
+
+
diff --git a/drivers/media/video/stk-webcam.h b/drivers/media/video/stk-webcam.h
new file mode 100644
index 00000000000..7e989d1ac1e
--- /dev/null
+++ b/drivers/media/video/stk-webcam.h
@@ -0,0 +1,138 @@
+/*
+ * stk-webcam.h : Driver for Syntek 1125 USB webcam controller
+ *
+ * Copyright (C) 2006 Nicolas VIVIEN
+ * Copyright 2007-2008 Jaime Velasco Juan <jsagarribay@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef STKWEBCAM_H
+#define STKWEBCAM_H
+
+#include <linux/usb.h>
+#include <media/v4l2-common.h>
+
+#define DRIVER_VERSION		"v0.0.1"
+#define DRIVER_VERSION_NUM	0x000001
+
+#define MAX_ISO_BUFS		3
+#define ISO_FRAMES_PER_DESC	16
+#define ISO_MAX_FRAME_SIZE	3 * 1024
+#define ISO_BUFFER_SIZE		(ISO_FRAMES_PER_DESC * ISO_MAX_FRAME_SIZE)
+
+
+#define PREFIX				"stkwebcam: "
+#define STK_INFO(str, args...)		printk(KERN_INFO PREFIX str, ##args)
+#define STK_ERROR(str, args...)		printk(KERN_ERR PREFIX str, ##args)
+#define STK_WARNING(str, args...)	printk(KERN_WARNING PREFIX str, ##args)
+
+struct stk_iso_buf {
+	void *data;
+	int length;
+	int read;
+	struct urb *urb;
+};
+
+/* Streaming IO buffers */
+struct stk_sio_buffer {
+	struct v4l2_buffer v4lbuf;
+	char *buffer;
+	int mapcount;
+	struct stk_camera *dev;
+	struct list_head list;
+};
+
+enum stk_mode {MODE_VGA, MODE_SXGA, MODE_CIF, MODE_QVGA, MODE_QCIF};
+
+struct stk_video {
+	enum stk_mode mode;
+	int brightness;
+	__u32 palette;
+	int hflip;
+	int vflip;
+};
+
+enum stk_status {
+	S_PRESENT = 1,
+	S_INITIALISED = 2,
+	S_MEMALLOCD = 4,
+	S_STREAMING = 8,
+};
+#define is_present(dev)		((dev)->status & S_PRESENT)
+#define is_initialised(dev)	((dev)->status & S_INITIALISED)
+#define is_streaming(dev)	((dev)->status & S_STREAMING)
+#define is_memallocd(dev)	((dev)->status & S_MEMALLOCD)
+#define set_present(dev)	((dev)->status = S_PRESENT)
+#define unset_present(dev)	((dev)->status &= \
+					~(S_PRESENT|S_INITIALISED|S_STREAMING))
+#define set_initialised(dev)	((dev)->status |= S_INITIALISED)
+#define set_memallocd(dev)	((dev)->status |= S_MEMALLOCD)
+#define unset_memallocd(dev)	((dev)->status &= ~S_MEMALLOCD)
+#define set_streaming(dev)	((dev)->status |= S_STREAMING)
+#define unset_streaming(dev)	((dev)->status &= ~S_STREAMING)
+
+struct regval {
+	unsigned reg;
+	unsigned val;
+};
+
+struct stk_camera {
+	struct video_device vdev;
+	struct usb_device *udev;
+	struct usb_interface *interface;
+	int webcam_model;
+	struct file *owner;
+
+	u8 isoc_ep;
+
+	struct kref kref;
+	/* Not sure if this is right */
+	atomic_t urbs_used;
+
+	struct stk_video vsettings;
+
+	enum stk_status status;
+
+	spinlock_t spinlock;
+	wait_queue_head_t wait_frame;
+
+	struct stk_iso_buf *isobufs;
+
+	int frame_size;
+	/* Streaming buffers */
+	unsigned int n_sbufs;
+	struct stk_sio_buffer *sio_bufs;
+	struct list_head sio_avail;
+	struct list_head sio_full;
+	unsigned sequence;
+};
+
+#define to_stk_camera(d) container_of(d, struct stk_camera, kref)
+#define vdev_to_camera(d) container_of(d, struct stk_camera, vdev)
+
+void stk_camera_delete(struct kref *);
+int stk_camera_write_reg(struct stk_camera *, u16, u8);
+int stk_camera_read_reg(struct stk_camera *, u16, int *);
+
+int stk_sensor_outb(struct stk_camera *dev, u8 reg, u8 val);
+int stk_sensor_inb(struct stk_camera *dev, u8 reg, u8 *val);
+int stk_sensor_init(struct stk_camera *);
+int stk_sensor_configure(struct stk_camera *);
+int stk_sensor_sleep(struct stk_camera *dev);
+int stk_sensor_wakeup(struct stk_camera *dev);
+int stk_sensor_set_brightness(struct stk_camera *dev, int br);
+
+#endif