aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/devices
diff options
context:
space:
mode:
authorJoern Engel <joern@wohnheim.fh-wedel.de>2006-04-10 22:54:17 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2006-04-11 06:18:43 -0700
commitacc8dadc0b3f007e6e60da77feb2efe2a19c5cda (patch)
treedf1d7ba842f9b944a0445f65e82a590c3e768dd4 /drivers/mtd/devices
parentf5e902817fee1589badca1284f49eecc0ef0c200 (diff)
[PATCH] Remove blkmtd
Remove the blkmtd driver. - An alternative exists (block2mtd) that hasn't had bug report for > 1 year. - Most embedded people tend to use ancient kernels with custom patches from mtd cvs and elsewhere, so the 1 year warning period neither helps nor hurts them too much. - It's in the way of klibc. The problems caused by pulling blkmtd support are fairly low, while the problems caused by delaying klibc can be fairly substantial. At best, this would be a severe burden on hpa's time. Signed-off-by: Joern Engel <joern@wohnheim.fh-wedel.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/mtd/devices')
-rw-r--r--drivers/mtd/devices/Kconfig13
-rw-r--r--drivers/mtd/devices/Makefile1
-rw-r--r--drivers/mtd/devices/blkmtd.c819
3 files changed, 2 insertions, 831 deletions
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index dd628cb51e3..7fac438b5c3 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -129,8 +129,8 @@ config MTDRAM_ABS_POS
allocating space from Linux's available memory. Otherwise, leave
this set to zero. Most people will want to leave this as zero.
-config MTD_BLKMTD
- tristate "MTD emulation using block device"
+config MTD_BLOCK2MTD
+ tristate "MTD using block device"
depends on MTD
help
This driver allows a block device to appear as an MTD. It would
@@ -141,15 +141,6 @@ config MTD_BLKMTD
Testing MTD users (eg JFFS2) on large media and media that might
be removed during a write (using the floppy drive).
-config MTD_BLOCK2MTD
- tristate "MTD using block device (rewrite)"
- depends on MTD && EXPERIMENTAL
- help
- This driver is basically the same at MTD_BLKMTD above, but
- experienced some interface changes plus serious speedups. In
- the long term, it should replace MTD_BLKMTD. Right now, you
- shouldn't entrust important data to it yet.
-
comment "Disk-On-Chip Device Drivers"
config MTD_DOC2000
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index 7c5ed217838..b6573670316 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -21,7 +21,6 @@ obj-$(CONFIG_MTD_PMC551) += pmc551.o
obj-$(CONFIG_MTD_MS02NV) += ms02-nv.o
obj-$(CONFIG_MTD_MTDRAM) += mtdram.o
obj-$(CONFIG_MTD_LART) += lart.o
-obj-$(CONFIG_MTD_BLKMTD) += blkmtd.o
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
diff --git a/drivers/mtd/devices/blkmtd.c b/drivers/mtd/devices/blkmtd.c
deleted file mode 100644
index 79f2e1f23eb..00000000000
--- a/drivers/mtd/devices/blkmtd.c
+++ /dev/null
@@ -1,819 +0,0 @@
-/*
- * $Id: blkmtd.c,v 1.27 2005/11/07 11:14:24 gleixner Exp $
- *
- * blkmtd.c - use a block device as a fake MTD
- *
- * Author: Simon Evans <spse@secret.org.uk>
- *
- * Copyright (C) 2001,2002 Simon Evans
- *
- * Licence: GPL
- *
- * How it works:
- * The driver uses raw/io to read/write the device and the page
- * cache to cache access. Writes update the page cache with the
- * new data and mark it dirty and add the page into a BIO which
- * is then written out.
- *
- * It can be loaded Read-Only to prevent erases and writes to the
- * medium.
- *
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/blkdev.h>
-#include <linux/bio.h>
-#include <linux/pagemap.h>
-#include <linux/list.h>
-#include <linux/init.h>
-#include <linux/mount.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mutex.h>
-
-#define err(format, arg...) printk(KERN_ERR "blkmtd: " format "\n" , ## arg)
-#define info(format, arg...) printk(KERN_INFO "blkmtd: " format "\n" , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING "blkmtd: " format "\n" , ## arg)
-#define crit(format, arg...) printk(KERN_CRIT "blkmtd: " format "\n" , ## arg)
-
-
-/* Default erase size in K, always make it a multiple of PAGE_SIZE */
-#define CONFIG_MTD_BLKDEV_ERASESIZE (128 << 10) /* 128KiB */
-#define VERSION "$Revision: 1.27 $"
-
-/* Info for the block device */
-struct blkmtd_dev {
- struct list_head list;
- struct block_device *blkdev;
- struct mtd_info mtd_info;
- struct mutex wrbuf_mutex;
-};
-
-
-/* Static info about the MTD, used in cleanup_module */
-static LIST_HEAD(blkmtd_device_list);
-
-
-static void blkmtd_sync(struct mtd_info *mtd);
-
-#define MAX_DEVICES 4
-
-/* Module parameters passed by insmod/modprobe */
-static char *device[MAX_DEVICES]; /* the block device to use */
-static int erasesz[MAX_DEVICES]; /* optional default erase size */
-static int ro[MAX_DEVICES]; /* optional read only flag */
-static int sync;
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Simon Evans <spse@secret.org.uk>");
-MODULE_DESCRIPTION("Emulate an MTD using a block device");
-module_param_array(device, charp, NULL, 0);
-MODULE_PARM_DESC(device, "block device to use");
-module_param_array(erasesz, int, NULL, 0);
-MODULE_PARM_DESC(erasesz, "optional erase size to use in KiB. eg 4=4KiB.");
-module_param_array(ro, bool, NULL, 0);
-MODULE_PARM_DESC(ro, "1=Read only, writes and erases cause errors");
-module_param(sync, bool, 0);
-MODULE_PARM_DESC(sync, "1=Synchronous writes");
-
-
-/* completion handler for BIO reads */
-static int bi_read_complete(struct bio *bio, unsigned int bytes_done, int error)
-{
- if (bio->bi_size)
- return 1;
-
- complete((struct completion*)bio->bi_private);
- return 0;
-}
-
-
-/* completion handler for BIO writes */
-static int bi_write_complete(struct bio *bio, unsigned int bytes_done, int error)
-{
- const int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags);
- struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1;
-
- if (bio->bi_size)
- return 1;
-
- if(!uptodate)
- err("bi_write_complete: not uptodate\n");
-
- do {
- struct page *page = bvec->bv_page;
- DEBUG(3, "Cleaning up page %ld\n", page->index);
- if (--bvec >= bio->bi_io_vec)
- prefetchw(&bvec->bv_page->flags);
-
- if (uptodate) {
- SetPageUptodate(page);
- } else {
- ClearPageUptodate(page);
- SetPageError(page);
- }
- clear_page_dirty(page);
- unlock_page(page);
- page_cache_release(page);
- } while (bvec >= bio->bi_io_vec);
-
- complete((struct completion*)bio->bi_private);
- return 0;
-}
-
-
-/* read one page from the block device */
-static int blkmtd_readpage(struct blkmtd_dev *dev, struct page *page)
-{
- struct bio *bio;
- struct completion event;
- int err = -ENOMEM;
-
- if(PageUptodate(page)) {
- DEBUG(2, "blkmtd: readpage page %ld is already upto date\n", page->index);
- unlock_page(page);
- return 0;
- }
-
- ClearPageUptodate(page);
- ClearPageError(page);
-
- bio = bio_alloc(GFP_KERNEL, 1);
- if(bio) {
- init_completion(&event);
- bio->bi_bdev = dev->blkdev;
- bio->bi_sector = page->index << (PAGE_SHIFT-9);
- bio->bi_private = &event;
- bio->bi_end_io = bi_read_complete;
- if(bio_add_page(bio, page, PAGE_SIZE, 0) == PAGE_SIZE) {
- submit_bio(READ_SYNC, bio);
- wait_for_completion(&event);
- err = test_bit(BIO_UPTODATE, &bio->bi_flags) ? 0 : -EIO;
- bio_put(bio);
- }
- }
-
- if(err)
- SetPageError(page);
- else
- SetPageUptodate(page);
- flush_dcache_page(page);
- unlock_page(page);
- return err;
-}
-
-
-/* write out the current BIO and wait for it to finish */
-static int blkmtd_write_out(struct bio *bio)
-{
- struct completion event;
- int err;
-
- if(!bio->bi_vcnt) {
- bio_put(bio);
- return 0;
- }
-
- init_completion(&event);
- bio->bi_private = &event;
- bio->bi_end_io = bi_write_complete;
- submit_bio(WRITE_SYNC, bio);
- wait_for_completion(&event);
- DEBUG(3, "submit_bio completed, bi_vcnt = %d\n", bio->bi_vcnt);
- err = test_bit(BIO_UPTODATE, &bio->bi_flags) ? 0 : -EIO;
- bio_put(bio);
- return err;
-}
-
-
-/**
- * blkmtd_add_page - add a page to the current BIO
- * @bio: bio to add to (NULL to alloc initial bio)
- * @blkdev: block device
- * @page: page to add
- * @pagecnt: pages left to add
- *
- * Adds a page to the current bio, allocating it if necessary. If it cannot be
- * added, the current bio is written out and a new one is allocated. Returns
- * the new bio to add or NULL on error
- */
-static struct bio *blkmtd_add_page(struct bio *bio, struct block_device *blkdev,
- struct page *page, int pagecnt)
-{
-
- retry:
- if(!bio) {
- bio = bio_alloc(GFP_KERNEL, pagecnt);
- if(!bio)
- return NULL;
- bio->bi_sector = page->index << (PAGE_SHIFT-9);
- bio->bi_bdev = blkdev;
- }
-
- if(bio_add_page(bio, page, PAGE_SIZE, 0) != PAGE_SIZE) {
- blkmtd_write_out(bio);
- bio = NULL;
- goto retry;
- }
- return bio;
-}
-
-
-/**
- * write_pages - write block of data to device via the page cache
- * @dev: device to write to
- * @buf: data source or NULL if erase (output is set to 0xff)
- * @to: offset into output device
- * @len: amount to data to write
- * @retlen: amount of data written
- *
- * Grab pages from the page cache and fill them with the source data.
- * Non page aligned start and end result in a readin of the page and
- * part of the page being modified. Pages are added to the bio and then written
- * out.
- */
-static int write_pages(struct blkmtd_dev *dev, const u_char *buf, loff_t to,
- size_t len, size_t *retlen)
-{
- int pagenr, offset;
- size_t start_len = 0, end_len;
- int pagecnt = 0;
- int err = 0;
- struct bio *bio = NULL;
- size_t thislen = 0;
-
- pagenr = to >> PAGE_SHIFT;
- offset = to & ~PAGE_MASK;
-
- DEBUG(2, "blkmtd: write_pages: buf = %p to = %ld len = %zd pagenr = %d offset = %d\n",
- buf, (long)to, len, pagenr, offset);
-
- /* see if we have to do a partial write at the start */
- if(offset) {
- start_len = ((offset + len) > PAGE_SIZE) ? PAGE_SIZE - offset : len;
- len -= start_len;
- }
-
- /* calculate the length of the other two regions */
- end_len = len & ~PAGE_MASK;
- len -= end_len;
-
- if(start_len)
- pagecnt++;
-
- if(len)
- pagecnt += len >> PAGE_SHIFT;
-
- if(end_len)
- pagecnt++;
-
- mutex_lock(&dev->wrbuf_mutex);
-
- DEBUG(3, "blkmtd: write: start_len = %zd len = %zd end_len = %zd pagecnt = %d\n",
- start_len, len, end_len, pagecnt);
-
- if(start_len) {
- /* do partial start region */
- struct page *page;
-
- DEBUG(3, "blkmtd: write: doing partial start, page = %d len = %zd offset = %d\n",
- pagenr, start_len, offset);
-
- BUG_ON(!buf);
- page = read_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr, (filler_t *)blkmtd_readpage, dev);
- lock_page(page);
- if(PageDirty(page)) {
- err("to = %lld start_len = %zd len = %zd end_len = %zd pagenr = %d\n",
- to, start_len, len, end_len, pagenr);
- BUG();
- }
- memcpy(page_address(page)+offset, buf, start_len);
- set_page_dirty(page);
- SetPageUptodate(page);
- buf += start_len;
- thislen = start_len;
- bio = blkmtd_add_page(bio, dev->blkdev, page, pagecnt);
- if(!bio) {
- err = -ENOMEM;
- err("bio_add_page failed\n");
- goto write_err;
- }
- pagecnt--;
- pagenr++;
- }
-
- /* Now do the main loop to a page aligned, n page sized output */
- if(len) {
- int pagesc = len >> PAGE_SHIFT;
- DEBUG(3, "blkmtd: write: whole pages start = %d, count = %d\n",
- pagenr, pagesc);
- while(pagesc) {
- struct page *page;
-
- /* see if page is in the page cache */
- DEBUG(3, "blkmtd: write: grabbing page %d from page cache\n", pagenr);
- page = grab_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr);
- if(PageDirty(page)) {
- BUG();
- }
- if(!page) {
- warn("write: cannot grab cache page %d", pagenr);
- err = -ENOMEM;
- goto write_err;
- }
- if(!buf) {
- memset(page_address(page), 0xff, PAGE_SIZE);
- } else {
- memcpy(page_address(page), buf, PAGE_SIZE);
- buf += PAGE_SIZE;
- }
- bio = blkmtd_add_page(bio, dev->blkdev, page, pagecnt);
- if(!bio) {
- err = -ENOMEM;
- err("bio_add_page failed\n");
- goto write_err;
- }
- pagenr++;
- pagecnt--;
- set_page_dirty(page);
- SetPageUptodate(page);
- pagesc--;
- thislen += PAGE_SIZE;
- }
- }
-
- if(end_len) {
- /* do the third region */
- struct page *page;
- DEBUG(3, "blkmtd: write: doing partial end, page = %d len = %zd\n",
- pagenr, end_len);
- BUG_ON(!buf);
- page = read_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr, (filler_t *)blkmtd_readpage, dev);
- lock_page(page);
- if(PageDirty(page)) {
- err("to = %lld start_len = %zd len = %zd end_len = %zd pagenr = %d\n",
- to, start_len, len, end_len, pagenr);
- BUG();
- }
- memcpy(page_address(page), buf, end_len);
- set_page_dirty(page);
- SetPageUptodate(page);
- DEBUG(3, "blkmtd: write: writing out partial end\n");
- thislen += end_len;
- bio = blkmtd_add_page(bio, dev->blkdev, page, pagecnt);
- if(!bio) {
- err = -ENOMEM;
- err("bio_add_page failed\n");
- goto write_err;
- }
- pagenr++;
- }
-
- DEBUG(3, "blkmtd: write: got %d vectors to write\n", bio->bi_vcnt);
- write_err:
- if(bio)
- blkmtd_write_out(bio);
-
- DEBUG(2, "blkmtd: write: end, retlen = %zd, err = %d\n", *retlen, err);
- mutex_unlock(&dev->wrbuf_mutex);
-
- if(retlen)
- *retlen = thislen;
- return err;
-}
-
-
-/* erase a specified part of the device */
-static int blkmtd_erase(struct mtd_info *mtd, struct erase_info *instr)
-{
- struct blkmtd_dev *dev = mtd->priv;
- struct mtd_erase_region_info *einfo = mtd->eraseregions;
- int numregions = mtd->numeraseregions;
- size_t from;
- u_long len;
- int err = -EIO;
- size_t retlen;
-
- instr->state = MTD_ERASING;
- from = instr->addr;
- len = instr->len;
-
- /* check erase region has valid start and length */
- DEBUG(2, "blkmtd: erase: dev = `%s' from = 0x%zx len = 0x%lx\n",
- mtd->name+9, from, len);
- while(numregions) {
- DEBUG(3, "blkmtd: checking erase region = 0x%08X size = 0x%X num = 0x%x\n",
- einfo->offset, einfo->erasesize, einfo->numblocks);
- if(from >= einfo->offset
- && from < einfo->offset + (einfo->erasesize * einfo->numblocks)) {
- if(len == einfo->erasesize
- && ( (from - einfo->offset) % einfo->erasesize == 0))
- break;
- }
- numregions--;
- einfo++;
- }
-
- if(!numregions) {
- /* Not a valid erase block */
- err("erase: invalid erase request 0x%lX @ 0x%08zX", len, from);
- instr->state = MTD_ERASE_FAILED;
- err = -EIO;
- }
-
- if(instr->state != MTD_ERASE_FAILED) {
- /* do the erase */
- DEBUG(3, "Doing erase from = %zd len = %ld\n", from, len);
- err = write_pages(dev, NULL, from, len, &retlen);
- if(err || retlen != len) {
- err("erase failed err = %d", err);
- instr->state = MTD_ERASE_FAILED;
- } else {
- instr->state = MTD_ERASE_DONE;
- }
- }
-
- DEBUG(3, "blkmtd: erase: checking callback\n");
- mtd_erase_callback(instr);
- DEBUG(2, "blkmtd: erase: finished (err = %d)\n", err);
- return err;
-}
-
-
-/* read a range of the data via the page cache */
-static int blkmtd_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
-{
- struct blkmtd_dev *dev = mtd->priv;
- int err = 0;
- int offset;
- int pagenr, pages;
- size_t thislen = 0;
-
- DEBUG(2, "blkmtd: read: dev = `%s' from = %lld len = %zd buf = %p\n",
- mtd->name+9, from, len, buf);
-
- if(from > mtd->size)
- return -EINVAL;
- if(from + len > mtd->size)
- len = mtd->size - from;
-
- pagenr = from >> PAGE_SHIFT;
- offset = from - (pagenr << PAGE_SHIFT);
-
- pages = (offset+len+PAGE_SIZE-1) >> PAGE_SHIFT;
- DEBUG(3, "blkmtd: read: pagenr = %d offset = %d, pages = %d\n",
- pagenr, offset, pages);
-
- while(pages) {
- struct page *page;
- int cpylen;
-
- DEBUG(3, "blkmtd: read: looking for page: %d\n", pagenr);
- page = read_cache_page(dev->blkdev->bd_inode->i_mapping, pagenr, (filler_t *)blkmtd_readpage, dev);
- if(IS_ERR(page)) {
- err = -EIO;
- goto readerr;
- }
-
- cpylen = (PAGE_SIZE > len) ? len : PAGE_SIZE;
- if(offset+cpylen > PAGE_SIZE)
- cpylen = PAGE_SIZE-offset;
-
- memcpy(buf + thislen, page_address(page) + offset, cpylen);
- offset = 0;
- len -= cpylen;
- thislen += cpylen;
- pagenr++;
- pages--;
- if(!PageDirty(page))
- page_cache_release(page);
- }
-
- readerr:
- if(retlen)
- *retlen = thislen;
- DEBUG(2, "blkmtd: end read: retlen = %zd, err = %d\n", thislen, err);
- return err;
-}
-
-
-/* write data to the underlying device */
-static int blkmtd_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
-{
- struct blkmtd_dev *dev = mtd->priv;
- int err;
-
- if(!len)
- return 0;
-
- DEBUG(2, "blkmtd: write: dev = `%s' to = %lld len = %zd buf = %p\n",
- mtd->name+9, to, len, buf);
-
- if(to >= mtd->size) {
- return -ENOSPC;
- }
-
- if(to + len > mtd->size) {
- len = mtd->size - to;
- }
-
- err = write_pages(dev, buf, to, len, retlen);
- if(err > 0)
- err = 0;
- DEBUG(2, "blkmtd: write: end, err = %d\n", err);
- return err;
-}
-
-
-/* sync the device - wait until the write queue is empty */
-static void blkmtd_sync(struct mtd_info *mtd)
-{
- /* Currently all writes are synchronous */
-}
-
-
-static void free_device(struct blkmtd_dev *dev)
-{
- DEBUG(2, "blkmtd: free_device() dev = %p\n", dev);
- if(dev) {
- kfree(dev->mtd_info.eraseregions);
- kfree(dev->mtd_info.name);
- if(dev->blkdev) {
- invalidate_inode_pages(dev->blkdev->bd_inode->i_mapping);
- close_bdev_excl(dev->blkdev);
- }
- kfree(dev);
- }
-}
-
-
-/* For a given size and initial erase size, calculate the number
- * and size of each erase region. Goes round the loop twice,
- * once to find out how many regions, then allocates space,
- * then round the loop again to fill it in.
- */
-static struct mtd_erase_region_info *calc_erase_regions(
- size_t erase_size, size_t total_size, int *regions)
-{
- struct mtd_erase_region_info *info = NULL;
-
- DEBUG(2, "calc_erase_regions, es = %zd size = %zd regions = %d\n",
- erase_size, total_size, *regions);
- /* Make any user specified erasesize be a power of 2
- and at least PAGE_SIZE */
- if(erase_size) {
- int es = erase_size;
- erase_size = 1;
- while(es != 1) {
- es >>= 1;
- erase_size <<= 1;
- }
- if(erase_size < PAGE_SIZE)
- erase_size = PAGE_SIZE;
- } else {
- erase_size = CONFIG_MTD_BLKDEV_ERASESIZE;
- }
-
- *regions = 0;
-
- do {
- int tot_size = total_size;
- int er_size = erase_size;
- int count = 0, offset = 0, regcnt = 0;
-
- while(tot_size) {
- count = tot_size / er_size;
- if(count) {
- tot_size = tot_size % er_size;
- if(info) {
- DEBUG(2, "adding to erase info off=%d er=%d cnt=%d\n",
- offset, er_size, count);
- (info+regcnt)->offset = offset;
- (info+regcnt)->erasesize = er_size;
- (info+regcnt)->numblocks = count;
- (*regions)++;
- }
- regcnt++;
- offset += (count * er_size);
- }
- while(er_size > tot_size)
- er_size >>= 1;
- }
- if(info == NULL) {
- info = kmalloc(regcnt * sizeof(struct mtd_erase_region_info), GFP_KERNEL);
- if(!info)
- break;
- }
- } while(!(*regions));
- DEBUG(2, "calc_erase_regions done, es = %zd size = %zd regions = %d\n",
- erase_size, total_size, *regions);
- return info;
-}
-
-
-static struct blkmtd_dev *add_device(char *devname, int readonly, int erase_size)
-{
- struct block_device *bdev;
- int mode;
- struct blkmtd_dev *dev;
-
- if(!devname)
- return NULL;
-
- /* Get a handle on the device */
-
-
-#ifdef MODULE
- mode = (readonly) ? O_RDONLY : O_RDWR;
- bdev = open_bdev_excl(devname, mode, NULL);
-#else
- mode = (readonly) ? FMODE_READ : FMODE_WRITE;
- bdev = open_by_devnum(name_to_dev_t(devname), mode);
-#endif
- if(IS_ERR(bdev)) {
- err("error: cannot open device %s", devname);
- DEBUG(2, "blkmtd: opening bdev returned %ld\n", PTR_ERR(bdev));
- return NULL;
- }
-
- DEBUG(1, "blkmtd: found a block device major = %d, minor = %d\n",
- MAJOR(bdev->bd_dev), MINOR(bdev->bd_dev));
-
- if(MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
- err("attempting to use an MTD device as a block device");
- blkdev_put(bdev);
- return NULL;
- }
-
- dev = kmalloc(sizeof(struct blkmtd_dev), GFP_KERNEL);
- if(dev == NULL) {
- blkdev_put(bdev);
- return NULL;
- }
-
- memset(dev, 0, sizeof(struct blkmtd_dev));
- dev->blkdev = bdev;
- if(!readonly) {
- mutex_init(&dev->wrbuf_mutex);
- }
-
- dev->mtd_info.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
-
- /* Setup the MTD structure */
- /* make the name contain the block device in */
- dev->mtd_info.name = kmalloc(sizeof("blkmtd: ") + strlen(devname), GFP_KERNEL);
- if(dev->mtd_info.name == NULL)
- goto devinit_err;
-
- sprintf(dev->mtd_info.name, "blkmtd: %s", devname);
- dev->mtd_info.eraseregions = calc_erase_regions(erase_size, dev->mtd_info.size,
- &dev->mtd_info.numeraseregions);
- if(dev->mtd_info.eraseregions == NULL)
- goto devinit_err;
-
- dev->mtd_info.erasesize = dev->mtd_info.eraseregions->erasesize;
- DEBUG(1, "blkmtd: init: found %d erase regions\n",
- dev->mtd_info.numeraseregions);
-
- if(readonly) {
- dev->mtd_info.type = MTD_ROM;
- dev->mtd_info.flags = MTD_CAP_ROM;
- } else {
- dev->mtd_info.type = MTD_RAM;
- dev->mtd_info.flags = MTD_CAP_RAM;
- dev->mtd_info.erase = blkmtd_erase;
- dev->mtd_info.write = blkmtd_write;
- dev->mtd_info.writev = default_mtd_writev;
- dev->mtd_info.sync = blkmtd_sync;
- }
- dev->mtd_info.read = blkmtd_read;
- dev->mtd_info.readv = default_mtd_readv;
- dev->mtd_info.priv = dev;
- dev->mtd_info.owner = THIS_MODULE;
-
- list_add(&dev->list, &blkmtd_device_list);
- if (add_mtd_device(&dev->mtd_info)) {
- /* Device didnt get added, so free the entry */
- list_del(&dev->list);
- goto devinit_err;
- } else {
- info("mtd%d: [%s] erase_size = %dKiB %s",
- dev->mtd_info.index, dev->mtd_info.name + strlen("blkmtd: "),
- dev->mtd_info.erasesize >> 10,
- readonly ? "(read-only)" : "");
- }
-
- return dev;
-
- devinit_err:
- free_device(dev);
- return NULL;
-}
-
-
-/* Cleanup and exit - sync the device and kill of the kernel thread */
-static void __devexit cleanup_blkmtd(void)
-{
- struct list_head *temp1, *temp2;
-
- /* Remove the MTD devices */
- list_for_each_safe(temp1, temp2, &blkmtd_device_list) {
- struct blkmtd_dev *dev = list_entry(temp1, struct blkmtd_dev,
- list);
- blkmtd_sync(&dev->mtd_info);
- del_mtd_device(&dev->mtd_info);
- info("mtd%d: [%s] removed", dev->mtd_info.index,
- dev->mtd_info.name + strlen("blkmtd: "));
- list_del(&dev->list);
- free_device(dev);
- }
-}
-
-#ifndef MODULE
-
-/* Handle kernel boot params */
-
-
-static int __init param_blkmtd_device(char *str)
-{
- int i;
-
- for(i = 0; i < MAX_DEVICES; i++) {
- device[i] = str;
- DEBUG(2, "blkmtd: device setup: %d = %s\n", i, device[i]);
- strsep(&str, ",");
- }
- return 1;
-}
-
-
-static int __init param_blkmtd_erasesz(char *str)
-{
- int i;
- for(i = 0; i < MAX_DEVICES; i++) {
- char *val = strsep(&str, ",");
- if(val)
- erasesz[i] = simple_strtoul(val, NULL, 0);
- DEBUG(2, "blkmtd: erasesz setup: %d = %d\n", i, erasesz[i]);
- }
-
- return 1;
-}
-
-
-static int __init param_blkmtd_ro(char *str)
-{
- int i;
- for(i = 0; i < MAX_DEVICES; i++) {
- char *val = strsep(&str, ",");
- if(val)
- ro[i] = simple_strtoul(val, NULL, 0);
- DEBUG(2, "blkmtd: ro setup: %d = %d\n", i, ro[i]);
- }
-
- return 1;
-}
-
-
-static int __init param_blkmtd_sync(char *str)
-{
- if(str[0] == '1')
- sync = 1;
- return 1;
-}
-
-__setup("blkmtd_device=", param_blkmtd_device);
-__setup("blkmtd_erasesz=", param_blkmtd_erasesz);
-__setup("blkmtd_ro=", param_blkmtd_ro);
-__setup("blkmtd_sync=", param_blkmtd_sync);
-
-#endif
-
-
-/* Startup */
-static int __init init_blkmtd(void)
-{
- int i;
-
- info("version " VERSION);
- /* Check args - device[0] is the bare minimum*/
- if(!device[0]) {
- err("error: missing `device' name\n");
- return -EINVAL;
- }
-
- for(i = 0; i < MAX_DEVICES; i++)
- add_device(device[i], ro[i], erasesz[i] << 10);
-
- if(list_empty(&blkmtd_device_list))
- return -EINVAL;
-
- return 0;
-}
-
-module_init(init_blkmtd);
-module_exit(cleanup_blkmtd);