diff options
author | Paul Mackerras <paulus@samba.org> | 2006-12-04 15:59:07 +1100 |
---|---|---|
committer | Paul Mackerras <paulus@samba.org> | 2006-12-04 15:59:07 +1100 |
commit | 79acbb3ff2d8095b692e1502b9eb2ccec348de26 (patch) | |
tree | 6ab773e5a8f9de2cd6443362b21d0d6fffe3b35e /drivers/net/Kconfig | |
parent | 19a79859e168640f8e16d7b216d211c1c52b687a (diff) | |
parent | 2b5f6dcce5bf94b9b119e9ed8d537098ec61c3d2 (diff) |
Merge branch 'linux-2.6' into for-linus
Diffstat (limited to 'drivers/net/Kconfig')
-rw-r--r-- | drivers/net/Kconfig | 68 |
1 files changed, 51 insertions, 17 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ab92cc794c6..9de0eed6755 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -32,7 +32,7 @@ config IFB tristate "Intermediate Functional Block support" depends on NET_CLS_ACT ---help--- - This is an intermidiate driver that allows sharing of + This is an intermediate driver that allows sharing of resources. To compile this driver as a module, choose M here: the module will be called ifb. If you want to use more than one ifb @@ -188,6 +188,17 @@ config MII or internal device. It is safe to say Y or M here even if your ethernet card lack MII. +config MACB + tristate "Atmel MACB support" + depends on NET_ETHERNET && AVR32 + select MII + help + The Atmel MACB ethernet interface is found on many AT32 and AT91 + parts. Say Y to include support for the MACB chip. + + To compile this driver as a module, choose M here: the module + will be called macb. + source "drivers/net/arm/Kconfig" config MACE @@ -486,7 +497,7 @@ config SGI_IOC3_ETH_HW_TX_CSUM config MIPS_SIM_NET tristate "MIPS simulator Network device (EXPERIMENTAL)" - depends on NETDEVICES && MIPS_SIM && EXPERIMENTAL + depends on MIPS_SIM && EXPERIMENTAL help The MIPSNET device is a simple Ethernet network device which is emulated by the MIPS Simulator. @@ -1769,8 +1780,8 @@ config VIA_RHINE_NAPI information. config LAN_SAA9730 - bool "Philips SAA9730 Ethernet support (EXPERIMENTAL)" - depends on NET_PCI && EXPERIMENTAL && MIPS + bool "Philips SAA9730 Ethernet support" + depends on NET_PCI && PCI && MIPS_ATLAS help The SAA9730 is a combined multimedia and peripheral controller used in thin clients, Internet access terminals, and diskless @@ -2112,7 +2123,7 @@ config SKGE config SKY2 tristate "SysKonnect Yukon2 support (EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL + depends on PCI select CRC32 ---help--- This driver supports Gigabit Ethernet adapters based on the @@ -2120,8 +2131,8 @@ config SKY2 Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 - This driver does not support the original Yukon chipset: a seperate - driver, skge, is provided for Yukon-based adapters. + There is companion driver for the older Marvell Yukon and + Genesis based adapters: skge. To compile this driver as a module, choose M here: the module will be called sky2. This is recommended. @@ -2136,7 +2147,7 @@ config SK98LIN This driver supports the original Yukon chipset. A cleaner driver is also available (skge) which seems to work better than this one. - This driver does not support the newer Yukon2 chipset. A seperate + This driver does not support the newer Yukon2 chipset. A separate driver, sky2, is provided to support Yukon2-based adapters. The following adapters are supported by this driver: @@ -2251,6 +2262,14 @@ config SPIDER_NET This driver supports the Gigabit Ethernet chips present on the Cell Processor-Based Blades from IBM. +config TSI108_ETH + tristate "Tundra TSI108 gigabit Ethernet support" + depends on TSI108_BRIDGE + help + This driver supports Tundra TSI108 gigabit Ethernet ports. + To compile this driver as a module, choose M here: the module + will be called tsi108_eth. + config GIANFAR tristate "Gianfar Ethernet" depends on 85xx || 83xx || PPC_86xx @@ -2288,7 +2307,7 @@ config UGETH_TX_ON_DEMOND config UGETH_HAS_GIGA bool - depends on UCC_GETH && MPC836x + depends on UCC_GETH && PPC_MPC836x config MV643XX_ETH tristate "MV-643XX Ethernet support" @@ -2341,10 +2360,11 @@ menu "Ethernet (10000 Mbit)" config CHELSIO_T1 tristate "Chelsio 10Gb Ethernet support" depends on PCI + select CRC32 help - This driver supports Chelsio N110 and N210 models 10Gb Ethernet - cards. More information about adapter features and performance - tuning is in <file:Documentation/networking/cxgb.txt>. + This driver supports Chelsio gigabit and 10-gigabit + Ethernet cards. More information about adapter features and + performance tuning is in <file:Documentation/networking/cxgb.txt>. For general information about Chelsio and our products, visit our website at <http://www.chelsio.com>. @@ -2357,6 +2377,13 @@ config CHELSIO_T1 To compile this driver as a module, choose M here: the module will be called cxgb. +config CHELSIO_T1_1G + bool "Chelsio gigabit Ethernet support" + depends on CHELSIO_T1 + help + Enables support for Chelsio's gigabit Ethernet PCI cards. If you + are using only 10G cards say 'N' here. + config EHEA tristate "eHEA Ethernet support" depends on IBMEBUS @@ -2447,6 +2474,12 @@ config MYRI10GE <file:Documentation/networking/net-modules.txt>. The module will be called myri10ge. +config NETXEN_NIC + tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" + depends on PCI + help + This enables the support for NetXen's Gigabit Ethernet card. + endmenu source "drivers/net/tokenring/Kconfig" @@ -2467,7 +2500,7 @@ config ISERIES_VETH config RIONET tristate "RapidIO Ethernet over messaging driver support" - depends on NETDEVICES && RAPIDIO + depends on RAPIDIO config RIONET_TX_SIZE int "Number of outbound queue entries" @@ -2717,6 +2750,7 @@ config PPP_MPPE select CRYPTO select CRYPTO_SHA1 select CRYPTO_ARC4 + select CRYPTO_ECB ---help--- Support for the MPPE Encryption protocol, as employed by the Microsoft Point-to-Point Tunneling Protocol. @@ -2832,7 +2866,7 @@ config NET_FC "SCSI generic support". config SHAPER - tristate "Traffic Shaper (EXPERIMENTAL)" + tristate "Traffic Shaper (OBSOLETE)" depends on EXPERIMENTAL ---help--- The traffic shaper is a virtual network device that allows you to @@ -2841,9 +2875,9 @@ config SHAPER these virtual devices. See <file:Documentation/networking/shaper.txt> for more information. - An alternative to this traffic shaper is the experimental - Class-Based Queuing (CBQ) scheduling support which you get if you - say Y to "QoS and/or fair queuing" above. + An alternative to this traffic shaper are traffic schedulers which + you'll get if you say Y to "QoS and/or fair queuing" in + "Networking options". To compile this driver as a module, choose M here: the module will be called shaper. If unsure, say N. |