aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/bnx2x_reg.h
diff options
context:
space:
mode:
authorEliezer Tamir <eliezert@broadcom.com>2007-11-15 20:09:02 +0200
committerDavid S. Miller <davem@davemloft.net>2008-01-28 15:03:53 -0800
commita2fbb9ea235467b0be6db3cec0132b6c83c0b9fb (patch)
treef6717161d5f374e84553f579eb3102bcf9ffdc0f /drivers/net/bnx2x_reg.h
parentfaa4f7969f3340606f46515560ce193d9bd74ea4 (diff)
add bnx2x driver for BCM57710
Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/bnx2x_reg.h')
-rw-r--r--drivers/net/bnx2x_reg.h4394
1 files changed, 4394 insertions, 0 deletions
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
new file mode 100644
index 00000000000..86055297ab0
--- /dev/null
+++ b/drivers/net/bnx2x_reg.h
@@ -0,0 +1,4394 @@
+/* bnx2x_reg.h: Broadcom Everest network driver.
+ *
+ * Copyright (c) 2007 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * The registers description starts with the regsister Access type followed
+ * by size in bits. For example [RW 32]. The access types are:
+ * R - Read only
+ * RC - Clear on read
+ * RW - Read/Write
+ * ST - Statistics register (clear on read)
+ * W - Write only
+ * WB - Wide bus register - the size is over 32 bits and it should be
+ * read/write in consecutive 32 bits accesses
+ * WR - Write Clear (write 1 to clear the bit)
+ *
+ */
+
+
+/* [R 19] Interrupt register #0 read */
+#define BRB1_REG_BRB1_INT_STS 0x6011c
+/* [RW 4] Parity mask register #0 read/write */
+#define BRB1_REG_BRB1_PRTY_MASK 0x60138
+/* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
+ address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
+ BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */
+#define BRB1_REG_FREE_LIST_PRS_CRDT 0x60200
+/* [RW 23] LL RAM data. */
+#define BRB1_REG_LL_RAM 0x61000
+/* [R 24] The number of full blocks. */
+#define BRB1_REG_NUM_OF_FULL_BLOCKS 0x60090
+/* [ST 32] The number of cycles that the write_full signal towards MAC #0
+ was asserted. */
+#define BRB1_REG_NUM_OF_FULL_CYCLES_0 0x600c8
+#define BRB1_REG_NUM_OF_FULL_CYCLES_1 0x600cc
+#define BRB1_REG_NUM_OF_FULL_CYCLES_2 0x600d0
+#define BRB1_REG_NUM_OF_FULL_CYCLES_3 0x600d4
+#define BRB1_REG_NUM_OF_FULL_CYCLES_4 0x600d8
+/* [ST 32] The number of cycles that the pause signal towards MAC #0 was
+ asserted. */
+#define BRB1_REG_NUM_OF_PAUSE_CYCLES_0 0x600b8
+#define BRB1_REG_NUM_OF_PAUSE_CYCLES_1 0x600bc
+#define BRB1_REG_NUM_OF_PAUSE_CYCLES_2 0x600c0
+#define BRB1_REG_NUM_OF_PAUSE_CYCLES_3 0x600c4
+/* [RW 10] Write client 0: De-assert pause threshold. */
+#define BRB1_REG_PAUSE_HIGH_THRESHOLD_0 0x60078
+#define BRB1_REG_PAUSE_HIGH_THRESHOLD_1 0x6007c
+/* [RW 10] Write client 0: Assert pause threshold. */
+#define BRB1_REG_PAUSE_LOW_THRESHOLD_0 0x60068
+#define BRB1_REG_PAUSE_LOW_THRESHOLD_1 0x6006c
+/* [RW 1] Reset the design by software. */
+#define BRB1_REG_SOFT_RESET 0x600dc
+/* [R 5] Used to read the value of the XX protection CAM occupancy counter. */
+#define CCM_REG_CAM_OCCUP 0xd0188
+/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define CCM_REG_CCM_CFC_IFEN 0xd003c
+/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
+ disregarded; valid is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define CCM_REG_CCM_CQM_IFEN 0xd000c
+/* [RW 1] If set the Q index; received from the QM is inserted to event ID.
+ Otherwise 0 is inserted. */
+#define CCM_REG_CCM_CQM_USE_Q 0xd00c0
+/* [RW 11] Interrupt mask register #0 read/write */
+#define CCM_REG_CCM_INT_MASK 0xd01e4
+/* [R 11] Interrupt register #0 read */
+#define CCM_REG_CCM_INT_STS 0xd01d8
+/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
+ REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
+ Is used to determine the number of the AG context REG-pairs written back;
+ when the input message Reg1WbFlg isn't set. */
+#define CCM_REG_CCM_REG0_SZ 0xd00c4
+/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
+ disregarded; valid is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define CCM_REG_CCM_STORM0_IFEN 0xd0004
+/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
+ disregarded; valid is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define CCM_REG_CCM_STORM1_IFEN 0xd0008
+/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
+ disregarded; valid output is deasserted; all other signals are treated as
+ usual; if 1 - normal activity. */
+#define CCM_REG_CDU_AG_RD_IFEN 0xd0030
+/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
+ are disregarded; all other signals are treated as usual; if 1 - normal
+ activity. */
+#define CCM_REG_CDU_AG_WR_IFEN 0xd002c
+/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
+ disregarded; valid output is deasserted; all other signals are treated as
+ usual; if 1 - normal activity. */
+#define CCM_REG_CDU_SM_RD_IFEN 0xd0038
+/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
+ input is disregarded; all other signals are treated as usual; if 1 -
+ normal activity. */
+#define CCM_REG_CDU_SM_WR_IFEN 0xd0034
+/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
+ the initial credit value; read returns the current value of the credit
+ counter. Must be initialized to 1 at start-up. */
+#define CCM_REG_CFC_INIT_CRD 0xd0204
+/* [RW 2] Auxillary counter flag Q number 1. */
+#define CCM_REG_CNT_AUX1_Q 0xd00c8
+/* [RW 2] Auxillary counter flag Q number 2. */
+#define CCM_REG_CNT_AUX2_Q 0xd00cc
+/* [RW 28] The CM header value for QM request (primary). */
+#define CCM_REG_CQM_CCM_HDR_P 0xd008c
+/* [RW 28] The CM header value for QM request (secondary). */
+#define CCM_REG_CQM_CCM_HDR_S 0xd0090
+/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define CCM_REG_CQM_CCM_IFEN 0xd0014
+/* [RW 6] QM output initial credit. Max credit available - 32. Write writes
+ the initial credit value; read returns the current value of the credit
+ counter. Must be initialized to 32 at start-up. */
+#define CCM_REG_CQM_INIT_CRD 0xd020c
+/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
+ stands for weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define CCM_REG_CQM_P_WEIGHT 0xd00b8
+/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define CCM_REG_CSDM_IFEN 0xd0018
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ at the SDM interface is detected. */
+#define CCM_REG_CSDM_LENGTH_MIS 0xd0170
+/* [RW 28] The CM header for QM formatting in case of an error in the QM
+ inputs. */
+#define CCM_REG_ERR_CCM_HDR 0xd0094
+/* [RW 8] The Event ID in case the input message ErrorFlg is set. */
+#define CCM_REG_ERR_EVNT_ID 0xd0098
+/* [RW 8] FIC0 output initial credit. Max credit available - 255. Write
+ writes the initial credit value; read returns the current value of the
+ credit counter. Must be initialized to 64 at start-up. */
+#define CCM_REG_FIC0_INIT_CRD 0xd0210
+/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
+ writes the initial credit value; read returns the current value of the
+ credit counter. Must be initialized to 64 at start-up. */
+#define CCM_REG_FIC1_INIT_CRD 0xd0214
+/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
+ - strict priority defined by ~ccm_registers_gr_ag_pr.gr_ag_pr;
+ ~ccm_registers_gr_ld0_pr.gr_ld0_pr and
+ ~ccm_registers_gr_ld1_pr.gr_ld1_pr. Groups are according to channels and
+ outputs to STORM: aggregation; load FIC0; load FIC1 and store. */
+#define CCM_REG_GR_ARB_TYPE 0xd015c
+/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
+ highest priority is 3. It is supposed; that the Store channel priority is
+ the compliment to 4 of the rest priorities - Aggregation channel; Load
+ (FIC0) channel and Load (FIC1). */
+#define CCM_REG_GR_LD0_PR 0xd0164
+/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
+ highest priority is 3. It is supposed; that the Store channel priority is
+ the compliment to 4 of the rest priorities - Aggregation channel; Load
+ (FIC0) channel and Load (FIC1). */
+#define CCM_REG_GR_LD1_PR 0xd0168
+/* [RW 2] General flags index. */
+#define CCM_REG_INV_DONE_Q 0xd0108
+/* [RW 4] The number of double REG-pairs(128 bits); loaded from the STORM
+ context and sent to STORM; for a specific connection type. The double
+ REG-pairs are used in order to align to STORM context row size of 128
+ bits. The offset of these data in the STORM context is always 0. Index
+ _(0..15) stands for the connection type (one of 16). */
+#define CCM_REG_N_SM_CTX_LD_0 0xd004c
+#define CCM_REG_N_SM_CTX_LD_1 0xd0050
+#define CCM_REG_N_SM_CTX_LD_10 0xd0074
+#define CCM_REG_N_SM_CTX_LD_11 0xd0078
+#define CCM_REG_N_SM_CTX_LD_12 0xd007c
+#define CCM_REG_N_SM_CTX_LD_13 0xd0080
+#define CCM_REG_N_SM_CTX_LD_14 0xd0084
+#define CCM_REG_N_SM_CTX_LD_15 0xd0088
+#define CCM_REG_N_SM_CTX_LD_2 0xd0054
+#define CCM_REG_N_SM_CTX_LD_3 0xd0058
+#define CCM_REG_N_SM_CTX_LD_4 0xd005c
+/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define CCM_REG_PBF_IFEN 0xd0028
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ at the pbf interface is detected. */
+#define CCM_REG_PBF_LENGTH_MIS 0xd0180
+/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define CCM_REG_PBF_WEIGHT 0xd00ac
+/* [RW 6] The physical queue number of queue number 1 per port index. */
+#define CCM_REG_PHYS_QNUM1_0 0xd0134
+#define CCM_REG_PHYS_QNUM1_1 0xd0138
+/* [RW 6] The physical queue number of queue number 2 per port index. */
+#define CCM_REG_PHYS_QNUM2_0 0xd013c
+#define CCM_REG_PHYS_QNUM2_1 0xd0140
+/* [RW 6] The physical queue number of queue number 3 per port index. */
+#define CCM_REG_PHYS_QNUM3_0 0xd0144
+/* [RW 6] The physical queue number of queue number 0 with QOS equal 0 port
+ index 0. */
+#define CCM_REG_QOS_PHYS_QNUM0_0 0xd0114
+#define CCM_REG_QOS_PHYS_QNUM0_1 0xd0118
+/* [RW 6] The physical queue number of queue number 0 with QOS equal 1 port
+ index 0. */
+#define CCM_REG_QOS_PHYS_QNUM1_0 0xd011c
+#define CCM_REG_QOS_PHYS_QNUM1_1 0xd0120
+/* [RW 6] The physical queue number of queue number 0 with QOS equal 2 port
+ index 0. */
+#define CCM_REG_QOS_PHYS_QNUM2_0 0xd0124
+/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define CCM_REG_STORM_CCM_IFEN 0xd0010
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ at the STORM interface is detected. */
+#define CCM_REG_STORM_LENGTH_MIS 0xd016c
+/* [RW 1] Input tsem Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define CCM_REG_TSEM_IFEN 0xd001c
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ at the tsem interface is detected. */
+#define CCM_REG_TSEM_LENGTH_MIS 0xd0174
+/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define CCM_REG_TSEM_WEIGHT 0xd00a0
+/* [RW 1] Input usem Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define CCM_REG_USEM_IFEN 0xd0024
+/* [RC 1] Set when message length mismatch (relative to last indication) at
+ the usem interface is detected. */
+#define CCM_REG_USEM_LENGTH_MIS 0xd017c
+/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define CCM_REG_USEM_WEIGHT 0xd00a8
+/* [RW 1] Input xsem Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define CCM_REG_XSEM_IFEN 0xd0020
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ at the xsem interface is detected. */
+#define CCM_REG_XSEM_LENGTH_MIS 0xd0178
+/* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define CCM_REG_XSEM_WEIGHT 0xd00a4
+/* [RW 19] Indirect access to the descriptor table of the XX protection
+ mechanism. The fields are: [5:0] - message length; [12:6] - message
+ pointer; 18:13] - next pointer. */
+#define CCM_REG_XX_DESCR_TABLE 0xd0300
+/* [R 7] Used to read the value of XX protection Free counter. */
+#define CCM_REG_XX_FREE 0xd0184
+/* [RW 6] Initial value for the credit counter; responsible for fulfilling
+ of the Input Stage XX protection buffer by the XX protection pending
+ messages. Max credit available - 127. Write writes the initial credit
+ value; read returns the current value of the credit counter. Must be
+ initialized to maximum XX protected message size - 2 at start-up. */
+#define CCM_REG_XX_INIT_CRD 0xd0220
+/* [RW 7] The maximum number of pending messages; which may be stored in XX
+ protection. At read the ~ccm_registers_xx_free.xx_free counter is read.
+ At write comprises the start value of the ~ccm_registers_xx_free.xx_free
+ counter. */
+#define CCM_REG_XX_MSG_NUM 0xd0224
+/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
+#define CCM_REG_XX_OVFL_EVNT_ID 0xd0044
+/* [RW 18] Indirect access to the XX table of the XX protection mechanism.
+ The fields are: [5:0] - tail pointer; 11:6] - Link List size; 17:12] -
+ header pointer. */
+#define CCM_REG_XX_TABLE 0xd0280
+#define CDU_REG_CDU_CHK_MASK0 0x101000
+#define CDU_REG_CDU_CHK_MASK1 0x101004
+#define CDU_REG_CDU_CONTROL0 0x101008
+#define CDU_REG_CDU_DEBUG 0x101010
+#define CDU_REG_CDU_GLOBAL_PARAMS 0x101020
+/* [RW 7] Interrupt mask register #0 read/write */
+#define CDU_REG_CDU_INT_MASK 0x10103c
+/* [R 7] Interrupt register #0 read */
+#define CDU_REG_CDU_INT_STS 0x101030
+/* [RW 5] Parity mask register #0 read/write */
+#define CDU_REG_CDU_PRTY_MASK 0x10104c
+/* [RC 32] logging of error data in case of a CDU load error:
+ {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
+ ype_error; ctual_active; ctual_compressed_context}; */
+#define CDU_REG_ERROR_DATA 0x101014
+/* [WB 216] L1TT ram access. each entry has the following format :
+ {mrege_regions[7:0]; ffset12[5:0]...offset0[5:0];
+ ength12[5:0]...length0[5:0]; d12[3:0]...id0[3:0]} */
+#define CDU_REG_L1TT 0x101800
+/* [WB 24] MATT ram access. each entry has the following
+ format:{RegionLength[11:0]; egionOffset[11:0]} */
+#define CDU_REG_MATT 0x101100
+/* [R 1] indication the initializing the activity counter by the hardware
+ was done. */
+#define CFC_REG_AC_INIT_DONE 0x104078
+/* [RW 13] activity counter ram access */
+#define CFC_REG_ACTIVITY_COUNTER 0x104400
+#define CFC_REG_ACTIVITY_COUNTER_SIZE 256
+/* [R 1] indication the initializing the cams by the hardware was done. */
+#define CFC_REG_CAM_INIT_DONE 0x10407c
+/* [RW 2] Interrupt mask register #0 read/write */
+#define CFC_REG_CFC_INT_MASK 0x104108
+/* [R 2] Interrupt register #0 read */
+#define CFC_REG_CFC_INT_STS 0x1040fc
+/* [RC 2] Interrupt register #0 read clear */
+#define CFC_REG_CFC_INT_STS_CLR 0x104100
+/* [RW 4] Parity mask register #0 read/write */
+#define CFC_REG_CFC_PRTY_MASK 0x104118
+/* [RW 21] CID cam access (21:1 - Data; alid - 0) */
+#define CFC_REG_CID_CAM 0x104800
+#define CFC_REG_CONTROL0 0x104028
+#define CFC_REG_DEBUG0 0x104050
+/* [RW 14] indicates per error (in #cfc_registers_cfc_error_vector.cfc_error
+ vector) whether the cfc should be disabled upon it */
+#define CFC_REG_DISABLE_ON_ERROR 0x104044
+/* [RC 14] CFC error vector. when the CFC detects an internal error it will
+ set one of these bits. the bit description can be found in CFC
+ specifications */
+#define CFC_REG_ERROR_VECTOR 0x10403c
+#define CFC_REG_INIT_REG 0x10404c
+/* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this
+ field allows changing the priorities of the weighted-round-robin arbiter
+ which selects which CFC load client should be served next */
+#define CFC_REG_LCREQ_WEIGHTS 0x104084
+/* [R 1] indication the initializing the link list by the hardware was done. */
+#define CFC_REG_LL_INIT_DONE 0x104074
+/* [R 9] Number of allocated LCIDs which are at empty state */
+#define CFC_REG_NUM_LCIDS_ALLOC 0x104020
+/* [R 9] Number of Arriving LCIDs in Link List Block */
+#define CFC_REG_NUM_LCIDS_ARRIVING 0x104004
+/* [R 9] Number of Inside LCIDs in Link List Block */
+#define CFC_REG_NUM_LCIDS_INSIDE 0x104008
+/* [R 9] Number of Leaving LCIDs in Link List Block */
+#define CFC_REG_NUM_LCIDS_LEAVING 0x104018
+/* [RW 8] The event id for aggregated interrupt 0 */
+#define CSDM_REG_AGG_INT_EVENT_0 0xc2038
+/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
+#define CSDM_REG_CFC_RSP_START_ADDR 0xc2008
+/* [RW 16] The maximum value of the competion counter #0 */
+#define CSDM_REG_CMP_COUNTER_MAX0 0xc201c
+/* [RW 16] The maximum value of the competion counter #1 */
+#define CSDM_REG_CMP_COUNTER_MAX1 0xc2020
+/* [RW 16] The maximum value of the competion counter #2 */
+#define CSDM_REG_CMP_COUNTER_MAX2 0xc2024
+/* [RW 16] The maximum value of the competion counter #3 */
+#define CSDM_REG_CMP_COUNTER_MAX3 0xc2028
+/* [RW 13] The start address in the internal RAM for the completion
+ counters. */
+#define CSDM_REG_CMP_COUNTER_START_ADDR 0xc200c
+/* [RW 32] Interrupt mask register #0 read/write */
+#define CSDM_REG_CSDM_INT_MASK_0 0xc229c
+#define CSDM_REG_CSDM_INT_MASK_1 0xc22ac
+/* [RW 11] Parity mask register #0 read/write */
+#define CSDM_REG_CSDM_PRTY_MASK 0xc22bc
+#define CSDM_REG_ENABLE_IN1 0xc2238
+#define CSDM_REG_ENABLE_IN2 0xc223c
+#define CSDM_REG_ENABLE_OUT1 0xc2240
+#define CSDM_REG_ENABLE_OUT2 0xc2244
+/* [RW 4] The initial number of messages that can be sent to the pxp control
+ interface without receiving any ACK. */
+#define CSDM_REG_INIT_CREDIT_PXP_CTRL 0xc24bc
+/* [ST 32] The number of ACK after placement messages received */
+#define CSDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc227c
+/* [ST 32] The number of packet end messages received from the parser */
+#define CSDM_REG_NUM_OF_PKT_END_MSG 0xc2274
+/* [ST 32] The number of requests received from the pxp async if */
+#define CSDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc2278
+/* [ST 32] The number of commands received in queue 0 */
+#define CSDM_REG_NUM_OF_Q0_CMD 0xc2248
+/* [ST 32] The number of commands received in queue 10 */
+#define CSDM_REG_NUM_OF_Q10_CMD 0xc226c
+/* [ST 32] The number of commands received in queue 11 */
+#define CSDM_REG_NUM_OF_Q11_CMD 0xc2270
+/* [ST 32] The number of commands received in queue 1 */
+#define CSDM_REG_NUM_OF_Q1_CMD 0xc224c
+/* [ST 32] The number of commands received in queue 3 */
+#define CSDM_REG_NUM_OF_Q3_CMD 0xc2250
+/* [ST 32] The number of commands received in queue 4 */
+#define CSDM_REG_NUM_OF_Q4_CMD 0xc2254
+/* [ST 32] The number of commands received in queue 5 */
+#define CSDM_REG_NUM_OF_Q5_CMD 0xc2258
+/* [ST 32] The number of commands received in queue 6 */
+#define CSDM_REG_NUM_OF_Q6_CMD 0xc225c
+/* [ST 32] The number of commands received in queue 7 */
+#define CSDM_REG_NUM_OF_Q7_CMD 0xc2260
+/* [ST 32] The number of commands received in queue 8 */
+#define CSDM_REG_NUM_OF_Q8_CMD 0xc2264
+/* [ST 32] The number of commands received in queue 9 */
+#define CSDM_REG_NUM_OF_Q9_CMD 0xc2268
+/* [RW 13] The start address in the internal RAM for queue counters */
+#define CSDM_REG_Q_COUNTER_START_ADDR 0xc2010
+/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
+#define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc2548
+/* [R 1] parser fifo empty in sdm_sync block */
+#define CSDM_REG_SYNC_PARSER_EMPTY 0xc2550
+/* [R 1] parser serial fifo empty in sdm_sync block */
+#define CSDM_REG_SYNC_SYNC_EMPTY 0xc2558
+/* [RW 32] Tick for timer counter. Applicable only when
+ ~csdm_registers_timer_tick_enable.timer_tick_enable =1 */
+#define CSDM_REG_TIMER_TICK 0xc2000
+/* [RW 5] The number of time_slots in the arbitration cycle */
+#define CSEM_REG_ARB_CYCLE_SIZE 0x200034
+/* [RW 3] The source that is associated with arbitration element 0. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2 */
+#define CSEM_REG_ARB_ELEMENT0 0x200020
+/* [RW 3] The source that is associated with arbitration element 1. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.
+ Could not be equal to register ~csem_registers_arb_element0.arb_element0 */
+#define CSEM_REG_ARB_ELEMENT1 0x200024
+/* [RW 3] The source that is associated with arbitration element 2. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.
+ Could not be equal to register ~csem_registers_arb_element0.arb_element0
+ and ~csem_registers_arb_element1.arb_element1 */
+#define CSEM_REG_ARB_ELEMENT2 0x200028
+/* [RW 3] The source that is associated with arbitration element 3. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
+ not be equal to register ~csem_registers_arb_element0.arb_element0 and
+ ~csem_registers_arb_element1.arb_element1 and
+ ~csem_registers_arb_element2.arb_element2 */
+#define CSEM_REG_ARB_ELEMENT3 0x20002c
+/* [RW 3] The source that is associated with arbitration element 4. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.
+ Could not be equal to register ~csem_registers_arb_element0.arb_element0
+ and ~csem_registers_arb_element1.arb_element1 and
+ ~csem_registers_arb_element2.arb_element2 and
+ ~csem_registers_arb_element3.arb_element3 */
+#define CSEM_REG_ARB_ELEMENT4 0x200030
+/* [RW 32] Interrupt mask register #0 read/write */
+#define CSEM_REG_CSEM_INT_MASK_0 0x200110
+#define CSEM_REG_CSEM_INT_MASK_1 0x200120
+/* [RW 32] Parity mask register #0 read/write */
+#define CSEM_REG_CSEM_PRTY_MASK_0 0x200130
+#define CSEM_REG_CSEM_PRTY_MASK_1 0x200140
+#define CSEM_REG_ENABLE_IN 0x2000a4
+#define CSEM_REG_ENABLE_OUT 0x2000a8
+/* [RW 32] This address space contains all registers and memories that are
+ placed in SEM_FAST block. The SEM_FAST registers are described in
+ appendix B. In order to access the SEM_FAST registers the base address
+ CSEM_REGISTERS_FAST_MEMORY (Offset: 0x220000) should be added to each
+ SEM_FAST register offset. */
+#define CSEM_REG_FAST_MEMORY 0x220000
+/* [RW 1] Disables input messages from FIC0 May be updated during run_time
+ by the microcode */
+#define CSEM_REG_FIC0_DISABLE 0x200224
+/* [RW 1] Disables input messages from FIC1 May be updated during run_time
+ by the microcode */
+#define CSEM_REG_FIC1_DISABLE 0x200234
+/* [RW 15] Interrupt table Read and write access to it is not possible in
+ the middle of the work */
+#define CSEM_REG_INT_TABLE 0x200400
+/* [ST 24] Statistics register. The number of messages that entered through
+ FIC0 */
+#define CSEM_REG_MSG_NUM_FIC0 0x200000
+/* [ST 24] Statistics register. The number of messages that entered through
+ FIC1 */
+#define CSEM_REG_MSG_NUM_FIC1 0x200004
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC0 */
+#define CSEM_REG_MSG_NUM_FOC0 0x200008
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC1 */
+#define CSEM_REG_MSG_NUM_FOC1 0x20000c
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC2 */
+#define CSEM_REG_MSG_NUM_FOC2 0x200010
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC3 */
+#define CSEM_REG_MSG_NUM_FOC3 0x200014
+/* [RW 1] Disables input messages from the passive buffer May be updated
+ during run_time by the microcode */
+#define CSEM_REG_PAS_DISABLE 0x20024c
+/* [WB 128] Debug only. Passive buffer memory */
+#define CSEM_REG_PASSIVE_BUFFER 0x202000
+/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
+#define CSEM_REG_PRAM 0x240000
+/* [R 16] Valid sleeping threads indication have bit per thread */
+#define CSEM_REG_SLEEP_THREADS_VALID 0x20026c
+/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
+#define CSEM_REG_SLOW_EXT_STORE_EMPTY 0x2002a0
+/* [RW 16] List of free threads . There is a bit per thread. */
+#define CSEM_REG_THREADS_LIST 0x2002e4
+/* [RW 3] The arbitration scheme of time_slot 0 */
+#define CSEM_REG_TS_0_AS 0x200038
+/* [RW 3] The arbitration scheme of time_slot 10 */
+#define CSEM_REG_TS_10_AS 0x200060
+/* [RW 3] The arbitration scheme of time_slot 11 */
+#define CSEM_REG_TS_11_AS 0x200064
+/* [RW 3] The arbitration scheme of time_slot 12 */
+#define CSEM_REG_TS_12_AS 0x200068
+/* [RW 3] The arbitration scheme of time_slot 13 */
+#define CSEM_REG_TS_13_AS 0x20006c
+/* [RW 3] The arbitration scheme of time_slot 14 */
+#define CSEM_REG_TS_14_AS 0x200070
+/* [RW 3] The arbitration scheme of time_slot 15 */
+#define CSEM_REG_TS_15_AS 0x200074
+/* [RW 3] The arbitration scheme of time_slot 16 */
+#define CSEM_REG_TS_16_AS 0x200078
+/* [RW 3] The arbitration scheme of time_slot 17 */
+#define CSEM_REG_TS_17_AS 0x20007c
+/* [RW 3] The arbitration scheme of time_slot 18 */
+#define CSEM_REG_TS_18_AS 0x200080
+/* [RW 3] The arbitration scheme of time_slot 1 */
+#define CSEM_REG_TS_1_AS 0x20003c
+/* [RW 3] The arbitration scheme of time_slot 2 */
+#define CSEM_REG_TS_2_AS 0x200040
+/* [RW 3] The arbitration scheme of time_slot 3 */
+#define CSEM_REG_TS_3_AS 0x200044
+/* [RW 3] The arbitration scheme of time_slot 4 */
+#define CSEM_REG_TS_4_AS 0x200048
+/* [RW 3] The arbitration scheme of time_slot 5 */
+#define CSEM_REG_TS_5_AS 0x20004c
+/* [RW 3] The arbitration scheme of time_slot 6 */
+#define CSEM_REG_TS_6_AS 0x200050
+/* [RW 3] The arbitration scheme of time_slot 7 */
+#define CSEM_REG_TS_7_AS 0x200054
+/* [RW 3] The arbitration scheme of time_slot 8 */
+#define CSEM_REG_TS_8_AS 0x200058
+/* [RW 3] The arbitration scheme of time_slot 9 */
+#define CSEM_REG_TS_9_AS 0x20005c
+/* [RW 1] Parity mask register #0 read/write */
+#define DBG_REG_DBG_PRTY_MASK 0xc0a8
+/* [RW 2] debug only: These bits indicate the credit for PCI request type 4
+ interface; MUST be configured AFTER pci_ext_buffer_strt_addr_lsb/msb are
+ configured */
+#define DBG_REG_PCI_REQ_CREDIT 0xc120
+/* [RW 32] Commands memory. The address to command X; row Y is to calculated
+ as 14*X+Y. */
+#define DMAE_REG_CMD_MEM 0x102400
+/* [RW 1] If 0 - the CRC-16c initial value is all zeroes; if 1 - the CRC-16c
+ initial value is all ones. */
+#define DMAE_REG_CRC16C_INIT 0x10201c
+/* [RW 1] If 0 - the CRC-16 T10 initial value is all zeroes; if 1 - the
+ CRC-16 T10 initial value is all ones. */
+#define DMAE_REG_CRC16T10_INIT 0x102020
+/* [RW 2] Interrupt mask register #0 read/write */
+#define DMAE_REG_DMAE_INT_MASK 0x102054
+/* [RW 4] Parity mask register #0 read/write */
+#define DMAE_REG_DMAE_PRTY_MASK 0x102064
+/* [RW 1] Command 0 go. */
+#define DMAE_REG_GO_C0 0x102080
+/* [RW 1] Command 1 go. */
+#define DMAE_REG_GO_C1 0x102084
+/* [RW 1] Command 10 go. */
+#define DMAE_REG_GO_C10 0x102088
+#define DMAE_REG_GO_C10_SIZE 1
+/* [RW 1] Command 11 go. */
+#define DMAE_REG_GO_C11 0x10208c
+#define DMAE_REG_GO_C11_SIZE 1
+/* [RW 1] Command 12 go. */
+#define DMAE_REG_GO_C12 0x102090
+#define DMAE_REG_GO_C12_SIZE 1
+/* [RW 1] Command 13 go. */
+#define DMAE_REG_GO_C13 0x102094
+#define DMAE_REG_GO_C13_SIZE 1
+/* [RW 1] Command 14 go. */
+#define DMAE_REG_GO_C14 0x102098
+#define DMAE_REG_GO_C14_SIZE 1
+/* [RW 1] Command 15 go. */
+#define DMAE_REG_GO_C15 0x10209c
+#define DMAE_REG_GO_C15_SIZE 1
+/* [RW 1] Command 10 go. */
+#define DMAE_REG_GO_C10 0x102088
+/* [RW 1] Command 11 go. */
+#define DMAE_REG_GO_C11 0x10208c
+/* [RW 1] Command 12 go. */
+#define DMAE_REG_GO_C12 0x102090
+/* [RW 1] Command 13 go. */
+#define DMAE_REG_GO_C13 0x102094
+/* [RW 1] Command 14 go. */
+#define DMAE_REG_GO_C14 0x102098
+/* [RW 1] Command 15 go. */
+#define DMAE_REG_GO_C15 0x10209c
+/* [RW 1] Command 2 go. */
+#define DMAE_REG_GO_C2 0x1020a0
+/* [RW 1] Command 3 go. */
+#define DMAE_REG_GO_C3 0x1020a4
+/* [RW 1] Command 4 go. */
+#define DMAE_REG_GO_C4 0x1020a8
+/* [RW 1] Command 5 go. */
+#define DMAE_REG_GO_C5 0x1020ac
+/* [RW 1] Command 6 go. */
+#define DMAE_REG_GO_C6 0x1020b0
+/* [RW 1] Command 7 go. */
+#define DMAE_REG_GO_C7 0x1020b4
+/* [RW 1] Command 8 go. */
+#define DMAE_REG_GO_C8 0x1020b8
+/* [RW 1] Command 9 go. */
+#define DMAE_REG_GO_C9 0x1020bc
+/* [RW 1] DMAE GRC Interface (Target; aster) enable. If 0 - the acknowledge
+ input is disregarded; valid is deasserted; all other signals are treated
+ as usual; if 1 - normal activity. */
+#define DMAE_REG_GRC_IFEN 0x102008
+/* [RW 1] DMAE PCI Interface (Request; ead; rite) enable. If 0 - the
+ acknowledge input is disregarded; valid is deasserted; full is asserted;
+ all other signals are treated as usual; if 1 - normal activity. */
+#define DMAE_REG_PCI_IFEN 0x102004
+/* [RW 4] DMAE- PCI Request Interface initial credit. Write writes the
+ initial value to the credit counter; related to the address. Read returns
+ the current value of the counter. */
+#define DMAE_REG_PXP_REQ_INIT_CRD 0x1020c0
+/* [RW 8] Aggregation command. */
+#define DORQ_REG_AGG_CMD0 0x170060
+/* [RW 8] Aggregation command. */
+#define DORQ_REG_AGG_CMD1 0x170064
+/* [RW 8] Aggregation command. */
+#define DORQ_REG_AGG_CMD2 0x170068
+/* [RW 8] Aggregation command. */
+#define DORQ_REG_AGG_CMD3 0x17006c
+/* [RW 28] UCM Header. */
+#define DORQ_REG_CMHEAD_RX 0x170050
+/* [RW 5] Interrupt mask register #0 read/write */
+#define DORQ_REG_DORQ_INT_MASK 0x170180
+/* [R 5] Interrupt register #0 read */
+#define DORQ_REG_DORQ_INT_STS 0x170174
+/* [RC 5] Interrupt register #0 read clear */
+#define DORQ_REG_DORQ_INT_STS_CLR 0x170178
+/* [RW 2] Parity mask register #0 read/write */
+#define DORQ_REG_DORQ_PRTY_MASK 0x170190
+/* [RW 8] The address to write the DPM CID to STORM. */
+#define DORQ_REG_DPM_CID_ADDR 0x170044
+/* [RW 5] The DPM mode CID extraction offset. */
+#define DORQ_REG_DPM_CID_OFST 0x170030
+/* [RW 12] The threshold of the DQ FIFO to send the almost full interrupt. */
+#define DORQ_REG_DQ_FIFO_AFULL_TH 0x17007c
+/* [RW 12] The threshold of the DQ FIFO to send the full interrupt. */
+#define DORQ_REG_DQ_FIFO_FULL_TH 0x170078
+/* [R 13] Current value of the DQ FIFO fill level according to following
+ pointer. The range is 0 - 256 FIFO rows; where each row stands for the
+ doorbell. */
+#define DORQ_REG_DQ_FILL_LVLF 0x1700a4
+/* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more or
+ equal to full threshold; reset on full clear. */
+#define DORQ_REG_DQ_FULL_ST 0x1700c0
+/* [RW 28] The value sent to CM header in the case of CFC load error. */
+#define DORQ_REG_ERR_CMHEAD 0x170058
+#define DORQ_REG_IF_EN 0x170004
+#define DORQ_REG_MODE_ACT 0x170008
+/* [RW 5] The normal mode CID extraction offset. */
+#define DORQ_REG_NORM_CID_OFST 0x17002c
+/* [RW 28] TCM Header when only TCP context is loaded. */
+#define DORQ_REG_NORM_CMHEAD_TX 0x17004c
+/* [RW 3] The number of simultaneous outstanding requests to Context Fetch
+ Interface. */
+#define DORQ_REG_OUTST_REQ 0x17003c
+#define DORQ_REG_REGN 0x170038
+/* [R 4] Current value of response A counter credit. Initial credit is
+ configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
+ register. */
+#define DORQ_REG_RSPA_CRD_CNT 0x1700ac
+/* [R 4] Current value of response B counter credit. Initial credit is
+ configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
+ register. */
+#define DORQ_REG_RSPB_CRD_CNT 0x1700b0
+/* [RW 4] The initial credit at the Doorbell Response Interface. The write
+ writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The
+ read reads this written value. */
+#define DORQ_REG_RSP_INIT_CRD 0x170048
+/* [RW 4] Initial activity counter value on the load request; when the
+ shortcut is done. */
+#define DORQ_REG_SHRT_ACT_CNT 0x170070
+/* [RW 28] TCM Header when both ULP and TCP context is loaded. */
+#define DORQ_REG_SHRT_CMHEAD 0x170054
+#define HC_CONFIG_0_REG_ATTN_BIT_EN_0 (0x1<<4)
+#define HC_CONFIG_0_REG_INT_LINE_EN_0 (0x1<<3)
+#define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 (0x1<<2)
+#define HC_CONFIG_0_REG_SINGLE_ISR_EN_0 (0x1<<1)
+#define HC_REG_AGG_INT_0 0x108050
+#define HC_REG_AGG_INT_1 0x108054
+/* [RW 16] attention bit and attention acknowledge bits status for port 0
+ and 1 according to the following address map: addr 0 - attn_bit_0; addr 1
+ - attn_ack_bit_0; addr 2 - attn_bit_1; addr 3 - attn_ack_bit_1; */
+#define HC_REG_ATTN_BIT 0x108120
+/* [RW 16] attn bits status index for attn bit msg; addr 0 - function 0;
+ addr 1 - functin 1 */
+#define HC_REG_ATTN_IDX 0x108100
+/* [RW 32] port 0 lower 32 bits address field for attn messag. */
+#define HC_REG_ATTN_MSG0_ADDR_L 0x108018
+/* [RW 32] port 1 lower 32 bits address field for attn messag. */
+#define HC_REG_ATTN_MSG1_ADDR_L 0x108020
+/* [RW 8] status block number for attn bit msg - function 0; */
+#define HC_REG_ATTN_NUM_P0 0x108038
+/* [RW 8] status block number for attn bit msg - function 1 */
+#define HC_REG_ATTN_NUM_P1 0x10803c
+#define HC_REG_CONFIG_0 0x108000
+#define HC_REG_CONFIG_1 0x108004
+/* [RW 3] Parity mask register #0 read/write */
+#define HC_REG_HC_PRTY_MASK 0x1080a0
+/* [RW 17] status block interrupt mask; one in each bit means unmask; zerow
+ in each bit means mask; bit 0 - default SB; bit 1 - SB_0; bit 2 - SB_1...
+ bit 16- SB_15; addr 0 - port 0; addr 1 - port 1 */
+#define HC_REG_INT_MASK 0x108108
+/* [RW 16] port 0 attn bit condition monitoring; each bit that is set will
+ lock a change fron 0 to 1 in the corresponding attention signals that
+ comes from the AEU */
+#define HC_REG_LEADING_EDGE_0 0x108040
+#define HC_REG_LEADING_EDGE_1 0x108048
+/* [RW 16] all producer and consumer of port 0 according to the following
+ addresses; U_prod: 0-15; C_prod: 16-31; U_cons: 32-47; C_cons:48-63;
+ Defoult_prod: U/C/X/T/Attn-64/65/66/67/68; Defoult_cons:
+ U/C/X/T/Attn-69/70/71/72/73 */
+#define HC_REG_P0_PROD_CONS 0x108200
+/* [RW 16] all producer and consumer of port 1according to the following
+ addresses; U_prod: 0-15; C_prod: 16-31; U_cons: 32-47; C_cons:48-63;
+ Defoult_prod: U/C/X/T/Attn-64/65/66/67/68; Defoult_cons:
+ U/C/X/T/Attn-69/70/71/72/73 */
+#define HC_REG_P1_PROD_CONS 0x108400
+/* [W 1] This register is write only and has 4 addresses as follow: 0 =
+ clear all PBA bits port 0; 1 = clear all pending interrupts request
+ port0; 2 = clear all PBA bits port 1; 3 = clear all pending interrupts
+ request port1; here is no meaning for the data in this register */
+#define HC_REG_PBA_COMMAND 0x108140
+#define HC_REG_PCI_CONFIG_0 0x108010
+#define HC_REG_PCI_CONFIG_1 0x108014
+/* [RW 24] all counters acording to the following address: LSB: 0=read; 1=
+ read_clear; 0-71 = HW counters (the inside order is the same as the
+ interrupt table in the spec); 72-219 = SW counters 1 (stops after first
+ consumer upd) the inside order is: 72-103 - U_non_default_p0; 104-135
+ C_non_defaul_p0; 36-145 U/C/X/T/Attn_default_p0; 146-177
+ U_non_default_p1; 178-209 C_non_defaul_p1; 10-219 U/C/X/T/Attn_default_p1
+ ; 220-367 = SW counters 2 (stops when prod=cons) the inside order is:
+ 220-251 - U_non_default_p0; 252-283 C_non_defaul_p0; 84-293
+ U/C/X/T/Attn_default_p0; 294-325 U_non_default_p1; 326-357
+ C_non_defaul_p1; 58-367 U/C/X/T/Attn_default_p1 ; 368-515 = mailbox
+ counters; (the inside order of the mailbox counter is 368-431 U and C
+ non_default_p0; 432-441 U/C/X/T/Attn_default_p0; 442-505 U and C
+ non_default_p1; 506-515 U/C/X/T/Attn_default_p1) */
+#define HC_REG_STATISTIC_COUNTERS 0x109000
+/* [RW 16] port 0 attn bit condition monitoring; each bit that is set will
+ lock a change fron 1 to 0 in the corresponding attention signals that
+ comes from the AEU */
+#define HC_REG_TRAILING_EDGE_0 0x108044
+#define HC_REG_TRAILING_EDGE_1 0x10804c
+#define HC_REG_UC_RAM_ADDR_0 0x108028
+#define HC_REG_UC_RAM_ADDR_1 0x108030
+/* [RW 16] ustorm address for coalesc now message */
+#define HC_REG_USTORM_ADDR_FOR_COALESCE 0x108068
+#define HC_REG_VQID_0 0x108008
+#define HC_REG_VQID_1 0x10800c
+#define MCP_REG_MCPR_NVM_ACCESS_ENABLE 0x86424
+#define MCP_REG_MCPR_NVM_ADDR 0x8640c
+#define MCP_REG_MCPR_NVM_CFG4 0x8642c
+#define MCP_REG_MCPR_NVM_COMMAND 0x86400
+#define MCP_REG_MCPR_NVM_READ 0x86410
+#define MCP_REG_MCPR_NVM_SW_ARB 0x86420
+#define MCP_REG_MCPR_NVM_WRITE 0x86408
+#define MCP_REG_MCPR_NVM_WRITE1 0x86428
+#define MCP_REG_MCPR_SCRATCH 0xa0000
+/* [R 32] read first 32 bit after inversion of function 0. mapped as
+ follows: [0] NIG attention for function0; [1] NIG attention for
+ function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp;
+ [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9]
+ GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE
+ glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0;
+ [13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16]
+ MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB
+ Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw
+ interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity
+ error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw
+ interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30] PBF
+ Parity error; [31] PBF Hw interrupt; */
+#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0 0xa42c
+#define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1 0xa430
+/* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0]
+ NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
+ mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
+ [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
+ PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
+ function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
+ Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
+ mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
+ BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
+ Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
+ interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
+ Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
+ interrupt; */
+#define MISC_REG_AEU_AFTER_INVERT_1_MCP 0xa434
+/* [R 32] read second 32 bit after inversion of function 0. mapped as
+ follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
+ Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
+ interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
+ error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
+ interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
+ NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
+ [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
+ interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
+ Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
+ Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
+ Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
+ interrupt; */
+#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0 0xa438
+#define MISC_REG_AEU_AFTER_INVERT_2_FUNC_1 0xa43c
+/* [R 32] read second 32 bit after inversion of mcp. mapped as follows: [0]
+ PBClient Parity error; [1] PBClient Hw interrupt; [2] QM Parity error;
+ [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt;
+ [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9]
+ XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
+ DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
+ error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
+ PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
+ [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
+ [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
+ [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
+ [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */
+#define MISC_REG_AEU_AFTER_INVERT_2_MCP 0xa440
+/* [R 32] read third 32 bit after inversion of function 0. mapped as
+ follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity
+ error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; [5]
+ PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
+ interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
+ error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
+ Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
+ pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
+ MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
+ SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
+ timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
+ func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
+ attn1; */
+#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0 0xa444
+#define MISC_REG_AEU_AFTER_INVERT_3_FUNC_1 0xa448
+/* [R 32] read third 32 bit after inversion of mcp. mapped as follows: [0]
+ CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity error; [3] PXP
+ Hw interrupt; [4] PXPpciClockClient Parity error; [5] PXPpciClockClient
+ Hw interrupt; [6] CFC Parity error; [7] CFC Hw interrupt; [8] CDU Parity
+ error; [9] CDU Hw interrupt; [10] DMAE Parity error; [11] DMAE Hw
+ interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) Hw interrupt; [14]
+ MISC Parity error; [15] MISC Hw interrupt; [16] pxp_misc_mps_attn; [17]
+ Flash event; [18] SMB event; [19] MCP attn0; [20] MCP attn1; [21] SW
+ timers attn_1 func0; [22] SW timers attn_2 func0; [23] SW timers attn_3
+ func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW timers attn_1
+ func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 func1; [29] SW
+ timers attn_4 func1; [30] General attn0; [31] General attn1; */
+#define MISC_REG_AEU_AFTER_INVERT_3_MCP 0xa44c
+/* [R 32] read fourth 32 bit after inversion of function 0. mapped as
+ follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
+ General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
+ [7] General attn9; [8] General attn10; [9] General attn11; [10] General
+ attn12; [11] General attn13; [12] General attn14; [13] General attn15;
+ [14] General attn16; [15] General attn17; [16] General attn18; [17]
+ General attn19; [18] General attn20; [19] General attn21; [20] Main power
+ interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
+ Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
+ Latched timeout attention; [27] GRC Latched reserved access attention;
+ [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
+ Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
+#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0 0xa450
+#define MISC_REG_AEU_AFTER_INVERT_4_FUNC_1 0xa454
+/* [R 32] read fourth 32 bit after inversion of mcp. mapped as follows: [0]
+ General attn2; [1] General attn3; [2] General attn4; [3] General attn5;
+ [4] General attn6; [5] General attn7; [6] General attn8; [7] General
+ attn9; [8] General attn10; [9] General attn11; [10] General attn12; [11]
+ General attn13; [12] General attn14; [13] General attn15; [14] General
+ attn16; [15] General attn17; [16] General attn18; [17] General attn19;
+ [18] General attn20; [19] General attn21; [20] Main power interrupt; [21]
+ RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN Latched attn; [24]
+ RBCU Latched attn; [25] RBCP Latched attn; [26] GRC Latched timeout
+ attention; [27] GRC Latched reserved access attention; [28] MCP Latched
+ rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched
+ ump_tx_parity; [31] MCP Latched scpad_parity; */
+#define MISC_REG_AEU_AFTER_INVERT_4_MCP 0xa458
+/* [W 11] write to this register results with the clear of the latched
+ signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in
+ d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP
+ latch; one in d5 clears GRC Latched timeout attention; one in d6 clears
+ GRC Latched reserved access attention; one in d7 clears Latched
+ rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears
+ Latched ump_tx_parity; one in d10 clears Latched scpad_parity; read from
+ this register return zero */
+#define MISC_REG_AEU_CLR_LATCH_SIGNAL 0xa45c
+/* [RW 32] first 32b for enabling the output for function 0 output0. mapped
+ as follows: [0] NIG attention for function0; [1] NIG attention for
+ function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
+ 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
+ GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
+ function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
+ Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
+ SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
+ indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
+ [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
+ SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
+ TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
+ TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
+#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0 0xa06c
+#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1 0xa07c
+#define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3 0xa09c
+/* [RW 32] first 32b for enabling the output for function 1 output0. mapped
+ as follows: [0] NIG attention for function0; [1] NIG attention for
+ function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function
+ 1; [5] GPIO4 function 1; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
+ GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
+ function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
+ Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
+ SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X
+ indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
+ [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
+ SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
+ TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
+ TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
+#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 0xa10c
+#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1 0xa11c
+#define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3 0xa13c
+/* [RW 32] first 32b for enabling the output for close the gate nig 0.
+ mapped as follows: [0] NIG attention for function0; [1] NIG attention for
+ function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
+ 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
+ GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
+ function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
+ Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
+ SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
+ indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
+ [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
+ SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
+ TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
+ TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
+#define MISC_REG_AEU_ENABLE1_NIG_0 0xa0ec
+#define MISC_REG_AEU_ENABLE1_NIG_1 0xa18c
+/* [RW 32] first 32b for enabling the output for close the gate pxp 0.
+ mapped as follows: [0] NIG attention for function0; [1] NIG attention for
+ function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
+ 0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
+ GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
+ function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
+ Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
+ SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
+ indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
+ [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
+ SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
+ TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
+ TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
+#define MISC_REG_AEU_ENABLE1_PXP_0 0xa0fc
+#define MISC_REG_AEU_ENABLE1_PXP_1 0xa19c
+/* [RW 32] second 32b for enabling the output for function 0 output0. mapped
+ as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
+ Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
+ interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
+ error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
+ interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
+ NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
+ [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
+ interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
+ Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
+ Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
+ Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
+ interrupt; */
+#define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0 0xa070
+#define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_1 0xa080
+/* [RW 32] second 32b for enabling the output for function 1 output0. mapped
+ as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
+ Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
+ interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
+ error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
+ interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
+ NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
+ [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
+ interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
+ Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
+ Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
+ Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
+ interrupt; */
+#define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0 0xa110
+#define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1 0xa120
+/* [RW 32] second 32b for enabling the output for close the gate nig 0.
+ mapped as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt;
+ [2] QM Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5]
+ Timers Hw interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8]
+ XCM Parity error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11]
+ XSEMI Hw interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw
+ interrupt; [14] NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI
+ core Parity error; [17] Vaux PCI core Hw interrupt; [18] Debug Parity
+ error; [19] Debug Hw interrupt; [20] USDM Parity error; [21] USDM Hw
+ interrupt; [22] UCM Parity error; [23] UCM Hw interrupt; [24] USEMI
+ Parity error; [25] USEMI Hw interrupt; [26] UPB Parity error; [27] UPB Hw
+ interrupt; [28] CSDM Parity error; [29] CSDM Hw interrupt; [30] CCM
+ Parity error; [31] CCM Hw interrupt; */
+#define MISC_REG_AEU_ENABLE2_NIG_0 0xa0f0
+#define MISC_REG_AEU_ENABLE2_NIG_1 0xa190
+/* [RW 32] second 32b for enabling the output for close the gate pxp 0.
+ mapped as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt;
+ [2] QM Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5]
+ Timers Hw interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8]
+ XCM Parity error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11]
+ XSEMI Hw interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw
+ interrupt; [14] NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI
+ core Parity error; [17] Vaux PCI core Hw interrupt; [18] Debug Parity
+ error; [19] Debug Hw interrupt; [20] USDM Parity error; [21] USDM Hw
+ interrupt; [22] UCM Parity error; [23] UCM Hw interrupt; [24] USEMI
+ Parity error; [25] USEMI Hw interrupt; [26] UPB Parity error; [27] UPB Hw
+ interrupt; [28] CSDM Parity error; [29] CSDM Hw interrupt; [30] CCM
+ Parity error; [31] CCM Hw interrupt; */
+#define MISC_REG_AEU_ENABLE2_PXP_0 0xa100
+#define MISC_REG_AEU_ENABLE2_PXP_1 0xa1a0
+/* [RW 32] third 32b for enabling the output for function 0 output0. mapped
+ as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
+ Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
+ [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
+ interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
+ error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
+ Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
+ pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
+ MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
+ SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
+ timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
+ func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
+ attn1; */
+#define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_0 0xa074
+#define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_1 0xa084
+/* [RW 32] third 32b for enabling the output for function 1 output0. mapped
+ as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
+ Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
+ [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
+ interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
+ error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
+ Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
+ pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
+ MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
+ SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
+ timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
+ func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
+ attn1; */
+#define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0 0xa114
+#define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1 0xa124
+/* [RW 32] third 32b for enabling the output for close the gate nig 0.
+ mapped as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2]
+ PXP Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity
+ error; [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC
+ Hw interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE
+ Parity error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13]
+ IGU (HC) Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt;
+ [16] pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0;
+ [20] MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0;
+ [23] SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST;
+ [26] SW timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers
+ attn_3 func1; [29] SW timers attn_4 func1; [30] General attn0; [31]
+ General attn1; */
+#define MISC_REG_AEU_ENABLE3_NIG_0 0xa0f4
+#define MISC_REG_AEU_ENABLE3_NIG_1 0xa194
+/* [RW 32] third 32b for enabling the output for close the gate pxp 0.
+ mapped as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2]
+ PXP Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity
+ error; [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC
+ Hw interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE
+ Parity error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13]
+ IGU (HC) Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt;
+ [16] pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0;
+ [20] MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0;
+ [23] SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST;
+ [26] SW timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers
+ attn_3 func1; [29] SW timers attn_4 func1; [30] General attn0; [31]
+ General attn1; */
+#define MISC_REG_AEU_ENABLE3_PXP_0 0xa104
+#define MISC_REG_AEU_ENABLE3_PXP_1 0xa1a4
+/* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped
+ as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
+ General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
+ [7] General attn9; [8] General attn10; [9] General attn11; [10] General
+ attn12; [11] General attn13; [12] General attn14; [13] General attn15;
+ [14] General attn16; [15] General attn17; [16] General attn18; [17]
+ General attn19; [18] General attn20; [19] General attn21; [20] Main power
+ interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
+ Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
+ Latched timeout attention; [27] GRC Latched reserved access attention;
+ [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
+ Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
+#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0 0xa078
+#define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2 0xa098
+/* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped
+ as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
+ General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
+ [7] General attn9; [8] General attn10; [9] General attn11; [10] General
+ attn12; [11] General attn13; [12] General attn14; [13] General attn15;
+ [14] General attn16; [15] General attn17; [16] General attn18; [17]
+ General attn19; [18] General attn20; [19] General attn21; [20] Main power
+ interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
+ Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
+ Latched timeout attention; [27] GRC Latched reserved access attention;
+ [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
+ Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
+#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0 0xa118
+#define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2 0xa138
+/* [RW 32] fourth 32b for enabling the output for close the gate nig
+ 0.mapped as follows: [0] General attn2; [1] General attn3; [2] General
+ attn4; [3] General attn5; [4] General attn6; [5] General attn7; [6]
+ General attn8; [7] General attn9; [8] General attn10; [9] General attn11;
+ [10] General attn12; [11] General attn13; [12] General attn14; [13]
+ General attn15; [14] General attn16; [15] General attn17; [16] General
+ attn18; [17] General attn19; [18] General attn20; [19] General attn21;
+ [20] Main power interrupt; [21] RBCR Latched attn; [22] RBCT Latched
+ attn; [23] RBCN Latched attn; [24] RBCU Latched attn; [25] RBCP Latched
+ attn; [26] GRC Latched timeout attention; [27] GRC Latched reserved
+ access attention; [28] MCP Latched rom_parity; [29] MCP Latched
+ ump_rx_parity; [30] MCP Latched ump_tx_parity; [31] MCP Latched
+ scpad_parity; */
+#define MISC_REG_AEU_ENABLE4_NIG_0 0xa0f8
+#define MISC_REG_AEU_ENABLE4_NIG_1 0xa198
+/* [RW 32] fourth 32b for enabling the output for close the gate pxp
+ 0.mapped as follows: [0] General attn2; [1] General attn3; [2] General
+ attn4; [3] General attn5; [4] General attn6; [5] General attn7; [6]
+ General attn8; [7] General attn9; [8] General attn10; [9] General attn11;
+ [10] General attn12; [11] General attn13; [12] General attn14; [13]
+ General attn15; [14] General attn16; [15] General attn17; [16] General
+ attn18; [17] General attn19; [18] General attn20; [19] General attn21;
+ [20] Main power interrupt; [21] RBCR Latched attn; [22] RBCT Latched
+ attn; [23] RBCN Latched attn; [24] RBCU Latched attn; [25] RBCP Latched
+ attn; [26] GRC Latched timeout attention; [27] GRC Latched reserved
+ access attention; [28] MCP Latched rom_parity; [29] MCP Latched
+ ump_rx_parity; [30] MCP Latched ump_tx_parity; [31] MCP Latched
+ scpad_parity; */
+#define MISC_REG_AEU_ENABLE4_PXP_0 0xa108
+#define MISC_REG_AEU_ENABLE4_PXP_1 0xa1a8
+/* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu
+ 128 bit vector */
+#define MISC_REG_AEU_GENERAL_ATTN_0 0xa000
+#define MISC_REG_AEU_GENERAL_ATTN_1 0xa004
+#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028
+#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
+#define MISC_REG_AEU_GENERAL_ATTN_12 0xa030
+#define MISC_REG_AEU_GENERAL_ATTN_13 0xa034
+#define MISC_REG_AEU_GENERAL_ATTN_14 0xa038
+#define MISC_REG_AEU_GENERAL_ATTN_15 0xa03c
+#define MISC_REG_AEU_GENERAL_ATTN_16 0xa040
+#define MISC_REG_AEU_GENERAL_ATTN_17 0xa044
+#define MISC_REG_AEU_GENERAL_ATTN_18 0xa048
+#define MISC_REG_AEU_GENERAL_ATTN_19 0xa04c
+#define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c
+#define MISC_REG_AEU_GENERAL_ATTN_2 0xa008
+#define MISC_REG_AEU_GENERAL_ATTN_20 0xa050
+#define MISC_REG_AEU_GENERAL_ATTN_21 0xa054
+#define MISC_REG_AEU_GENERAL_ATTN_3 0xa00c
+#define MISC_REG_AEU_GENERAL_ATTN_4 0xa010
+#define MISC_REG_AEU_GENERAL_ATTN_5 0xa014
+#define MISC_REG_AEU_GENERAL_ATTN_6 0xa018
+/* [RW 32] first 32b for inverting the input for function 0; for each bit:
+ 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for
+ function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp;
+ [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; [7] GPIO2 function 1;
+ [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
+ function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
+ Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
+ SPIO4; [15] SPIO5; [16] MSI/X indication for mcp; [17] MSI/X indication
+ for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; [20] PRS
+ Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] SRC Hw
+ interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] TCM
+ Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] TSEMI
+ Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
+#define MISC_REG_AEU_INVERTER_1_FUNC_0 0xa22c
+#define MISC_REG_AEU_INVERTER_1_FUNC_1 0xa23c
+/* [RW 32] second 32b for inverting the input for function 0; for each bit:
+ 0= do not invert; 1= invert. mapped as follows: [0] PBClient Parity
+ error; [1] PBClient Hw interrupt; [2] QM Parity error; [3] QM Hw
+ interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; [6] XSDM
+ Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] XCM Hw
+ interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
+ DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
+ error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
+ PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
+ [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
+ [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
+ [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
+ [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */
+#define MISC_REG_AEU_INVERTER_2_FUNC_0 0xa230
+#define MISC_REG_AEU_INVERTER_2_FUNC_1 0xa240
+/* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0;
+ [9:8] = mask close the gates signals of function 0 toward PXP [8] and NIG
+ [9]. Zero = mask; one = unmask */
+#define MISC_REG_AEU_MASK_ATTN_FUNC_0 0xa060
+#define MISC_REG_AEU_MASK_ATTN_FUNC_1 0xa064
+/* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' - 1
+ Port. */
+#define MISC_REG_BOND_ID 0xa400
+/* [R 8] These bits indicate the metal revision of the chip. This value
+ starts at 0x00 for each all-layer tape-out and increments by one for each
+ tape-out. */
+#define MISC_REG_CHIP_METAL 0xa404
+/* [R 16] These bits indicate the part number for the chip. */
+#define MISC_REG_CHIP_NUM 0xa408
+/* [R 4] These bits indicate the base revision of the chip. This value
+ starts at 0x0 for the A0 tape-out and increments by one for each
+ all-layer tape-out. */
+#define MISC_REG_CHIP_REV 0xa40c
+/* [RW 1] Setting this bit enables a timer in the GRC block to timeout any
+ access that does not finish within
+ ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is
+ cleared; this timeout is disabled. If this timeout occurs; the GRC shall
+ assert it attention output. */
+#define MISC_REG_GRC_TIMEOUT_EN 0xa280
+/* [RW 28] 28 LSB of LCPLL first register; reset val = 521. inside order of
+ the bits is: [2:0] OAC reset value 001) CML output buffer bias control;
+ 111 for +40%; 011 for +20%; 001 for 0%; 000 for -20%. [5:3] Icp_ctrl
+ (reset value 001) Charge pump current control; 111 for 720u; 011 for
+ 600u; 001 for 480u and 000 for 360u. [7:6] Bias_ctrl (reset value 00)
+ Global bias control; When bit 7 is high bias current will be 10 0gh; When
+ bit 6 is high bias will be 100w; Valid values are 00; 10; 01. [10:8]
+ Pll_observe (reset value 010) Bits to control observability. bit 10 is
+ for test bias; bit 9 is for test CK; bit 8 is test Vc. [12:11] Vth_ctrl
+ (reset value 00) Comparator threshold control. 00 for 0.6V; 01 for 0.54V
+ and 10 for 0.66V. [13] pllSeqStart (reset value 0) Enables VCO tuning
+ sequencer: 1= sequencer disabled; 0= sequencer enabled (inverted
+ internally). [14] reserved (reset value 0) Reset for VCO sequencer is
+ connected to RESET input directly. [15] capRetry_en (reset value 0)
+ enable retry on cap search failure (inverted). [16] freqMonitor_e (reset
+ value 0) bit to continuously monitor vco freq (inverted). [17]
+ freqDetRestart_en (reset value 0) bit to enable restart when not freq
+ locked (inverted). [18] freqDetRetry_en (reset value 0) bit to enable
+ retry on freq det failure(inverted). [19] pllForceFdone_en (reset value
+ 0) bit to enable pllForceFdone & pllForceFpass into pllSeq. [20]
+ pllForceFdone (reset value 0) bit to force freqDone. [21] pllForceFpass
+ (reset value 0) bit to force freqPass. [22] pllForceDone_en (reset value
+ 0) bit to enable pllForceCapDone. [23] pllForceCapDone (reset value 0)
+ bit to force capDone. [24] pllForceCapPass_en (reset value 0) bit to
+ enable pllForceCapPass. [25] pllForceCapPass (reset value 0) bit to force
+ capPass. [26] capRestart (reset value 0) bit to force cap sequencer to
+ restart. [27] capSelectM_en (reset value 0) bit to enable cap select
+ register bits. */
+#define MISC_REG_LCPLL_CTRL_1 0xa2a4
+#define MISC_REG_LCPLL_CTRL_REG_2 0xa2a8
+/* [RW 4] Interrupt mask register #0 read/write */
+#define MISC_REG_MISC_INT_MASK 0xa388
+/* [RW 1] Parity mask register #0 read/write */
+#define MISC_REG_MISC_PRTY_MASK 0xa398
+/* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911.
+ inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1
+ divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1
+ divider[3] (reset value 0); [4] P2 divider[0] (reset value 1); [5] P2
+ divider[1] (reset value 0); [6] P2 divider[2] (reset value 0); [7] P2
+ divider[3] (reset value 0); [8] ph_det_dis (reset value 1); [9]
+ freq_det_dis (reset value 0); [10] Icpx[0] (reset value 0); [11] Icpx[1]
+ (reset value 1); [12] Icpx[2] (reset value 0); [13] Icpx[3] (reset value
+ 1); [14] Icpx[4] (reset value 0); [15] Icpx[5] (reset value 0); [16]
+ Rx[0] (reset value 1); [17] Rx[1] (reset value 0); [18] vc_en (reset
+ value 1); [19] vco_rng[0] (reset value 1); [20] vco_rng[1] (reset value
+ 1); [21] Kvco_xf[0] (reset value 0); [22] Kvco_xf[1] (reset value 0);
+ [23] Kvco_xf[2] (reset value 0); [24] Kvco_xs[0] (reset value 1); [25]
+ Kvco_xs[1] (reset value 1); [26] Kvco_xs[2] (reset value 1); [27]
+ testd_en (reset value 0); [28] testd_sel[0] (reset value 0); [29]
+ testd_sel[1] (reset value 0); [30] testd_sel[2] (reset value 0); [31]
+ testa_en (reset value 0); */
+#define MISC_REG_PLL_STORM_CTRL_1 0xa294
+#define MISC_REG_PLL_STORM_CTRL_2 0xa298
+#define MISC_REG_PLL_STORM_CTRL_3 0xa29c
+#define MISC_REG_PLL_STORM_CTRL_4 0xa2a0
+/* [RW 32] reset reg#1; rite/read one = the specific block is out of reset;
+ write/read zero = the specific block is in reset; addr 0-wr- the write
+ value will be written to the register; addr 1-set - one will be written
+ to all the bits that have the value of one in the data written (bits that
+ have the value of zero will not be change) ; addr 2-clear - zero will be
+ written to all the bits that have the value of one in the data written
+ (bits that have the value of zero will not be change); addr 3-ignore;
+ read ignore from all addr except addr 00; inside order of the bits is:
+ [0] rst_brb1; [1] rst_prs; [2] rst_src; [3] rst_tsdm; [4] rst_tsem; [5]
+ rst_tcm; [6] rst_rbcr; [7] rst_nig; [8] rst_usdm; [9] rst_ucm; [10]
+ rst_usem; [11] rst_upb; [12] rst_ccm; [13] rst_csem; [14] rst_csdm; [15]
+ rst_rbcu; [16] rst_pbf; [17] rst_qm; [18] rst_tm; [19] rst_dorq; [20]
+ rst_xcm; [21] rst_xsdm; [22] rst_xsem; [23] rst_rbct; [24] rst_cdu; [25]
+ rst_cfc; [26] rst_pxp; [27] rst_pxpv; [28] rst_rbcp; [29] rst_hc; [30]
+ rst_dmae; [31] rst_semi_rtc; */
+#define MISC_REG_RESET_REG_1 0xa580
+#define MISC_REG_RESET_REG_2 0xa590
+/* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is
+ shared with the driver resides */
+#define MISC_REG_SHARED_MEM_ADDR 0xa2b4
+#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0)
+#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9)
+#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15)
+#define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS (0xf<<18)
+/* [RW 1] Input enable for RX_BMAC0 IF */
+#define NIG_REG_BMAC0_IN_EN 0x100ac
+/* [RW 1] output enable for TX_BMAC0 IF */
+#define NIG_REG_BMAC0_OUT_EN 0x100e0
+/* [RW 1] output enable for TX BMAC pause port 0 IF */
+#define NIG_REG_BMAC0_PAUSE_OUT_EN 0x10110
+/* [RW 1] output enable for RX_BMAC0_REGS IF */
+#define NIG_REG_BMAC0_REGS_OUT_EN 0x100e8
+/* [RW 1] output enable for RX BRB1 port0 IF */
+#define NIG_REG_BRB0_OUT_EN 0x100f8
+/* [RW 1] Input enable for TX BRB1 pause port 0 IF */
+#define NIG_REG_BRB0_PAUSE_IN_EN 0x100c4
+/* [RW 1] output enable for RX BRB1 port1 IF */
+#define NIG_REG_BRB1_OUT_EN 0x100fc
+/* [RW 1] Input enable for TX BRB1 pause port 1 IF */
+#define NIG_REG_BRB1_PAUSE_IN_EN 0x100c8
+/* [RW 1] output enable for RX BRB1 LP IF */
+#define NIG_REG_BRB_LB_OUT_EN 0x10100
+/* [WB_W 72] Debug packet to LP from RBC; Data spelling:[63:0] data; 64]
+ error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush */
+#define NIG_REG_DEBUG_PACKET_LB 0x10800
+/* [RW 1] Input enable for TX Debug packet */
+#define NIG_REG_EGRESS_DEBUG_IN_EN 0x100dc
+/* [RW 1] If 1 - egress drain mode for port0 is active. In this mode all
+ packets from PBFare not forwarded to the MAC and just deleted from FIFO.
+ First packet may be deleted from the middle. And last packet will be
+ always deleted till the end. */
+#define NIG_REG_EGRESS_DRAIN0_MODE 0x10060
+/* [RW 1] Output enable to EMAC0 */
+#define NIG_REG_EGRESS_EMAC0_OUT_EN 0x10120
+/* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs
+ to emac for port0; other way to bmac for port0 */
+#define NIG_REG_EGRESS_EMAC0_PORT 0x10058
+/* [RW 1] Input enable for TX PBF user packet port0 IF */
+#define NIG_REG_EGRESS_PBF0_IN_EN 0x100cc
+/* [RW 1] Input enable for TX PBF user packet port1 IF */
+#define NIG_REG_EGRESS_PBF1_IN_EN 0x100d0
+/* [RW 1] Input enable for RX_EMAC0 IF */
+#define NIG_REG_EMAC0_IN_EN 0x100a4
+/* [RW 1] output enable for TX EMAC pause port 0 IF */
+#define NIG_REG_EMAC0_PAUSE_OUT_EN 0x10118
+/* [R 1] status from emac0. This bit is set when MDINT from either the
+ EXT_MDINT pin or from the Copper PHY is driven low. This condition must
+ be cleared in the attached PHY device that is driving the MINT pin. */
+#define NIG_REG_EMAC0_STATUS_MISC_MI_INT 0x10494
+/* [WB 48] This address space contains BMAC0 registers. The BMAC registers
+ are described in appendix A. In order to access the BMAC0 registers; the
+ base address; NIG_REGISTERS_INGRESS_BMAC0_MEM; Offset: 0x10c00; should be
+ added to each BMAC register offset */
+#define NIG_REG_INGRESS_BMAC0_MEM 0x10c00
+/* [WB 48] This address space contains BMAC1 registers. The BMAC registers
+ are described in appendix A. In order to access the BMAC0 registers; the
+ base address; NIG_REGISTERS_INGRESS_BMAC1_MEM; Offset: 0x11000; should be
+ added to each BMAC register offset */
+#define NIG_REG_INGRESS_BMAC1_MEM 0x11000
+/* [R 1] FIFO empty in EOP descriptor FIFO of LP in NIG_RX_EOP */
+#define NIG_REG_INGRESS_EOP_LB_EMPTY 0x104e0
+/* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data
+ packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16] */
+#define NIG_REG_INGRESS_EOP_LB_FIFO 0x104e4
+/* [RW 1] led 10g for port 0 */
+#define NIG_REG_LED_10G_P0 0x10320
+/* [RW 1] Port0: This bit is set to enable the use of the
+ ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field
+ defined below. If this bit is cleared; then the blink rate will be about
+ 8Hz. */
+#define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 0x10318
+/* [RW 12] Port0: Specifies the period of each blink cycle (on + off) for
+ Traffic LED in milliseconds. Must be a non-zero value. This 12-bit field
+ is reset to 0x080; giving a default blink period of approximately 8Hz. */
+#define NIG_REG_LED_CONTROL_BLINK_RATE_P0 0x10310
+/* [RW 1] Port0: If set along with the
+ nig_registers_led_control_override_traffic_p0.led_control_override_traffic_p0
+ bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED
+ bit; the Traffic LED will blink with the blink rate specified in
+ ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
+ ~nig_registers_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
+ fields. */
+#define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0 0x10308
+/* [RW 1] Port0: If set overrides hardware control of the Traffic LED. The
+ Traffic LED will then be controlled via bit ~nig_registers_
+ led_control_traffic_p0.led_control_traffic_p0 and bit
+ ~nig_registers_led_control_blink_traffic_p0.led_control_blink_traffic_p0 */
+#define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 0x102f8
+/* [RW 1] Port0: If set along with the led_control_override_trafic_p0 bit;
+ turns on the Traffic LED. If the led_control_blink_traffic_p0 bit is also
+ set; the LED will blink with blink rate specified in
+ ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
+ ~nig_regsters_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
+ fields. */
+#define NIG_REG_LED_CONTROL_TRAFFIC_P0 0x10300
+/* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3;
+ 9-11PHY7; 12 MAC4; 13-15 PHY10; */
+#define NIG_REG_LED_MODE_P0 0x102f0
+#define NIG_REG_LLH0_BRB1_DRV_MASK 0x10244
+/* [RW 1] send to BRB1 if no match on any of RMP rules. */
+#define NIG_REG_LLH0_BRB1_NOT_MCP 0x1025c
+/* [RW 32] cm header for llh0 */
+#define NIG_REG_LLH0_CM_HEADER 0x1007c
+#define NIG_REG_LLH0_ERROR_MASK 0x1008c
+/* [RW 8] event id for llh0 */
+#define NIG_REG_LLH0_EVENT_ID 0x10084
+/* [RW 8] init credit counter for port0 in LLH */
+#define NIG_REG_LLH0_XCM_INIT_CREDIT 0x10554
+#define NIG_REG_LLH0_XCM_MASK 0x10130
+/* [RW 1] send to BRB1 if no match on any of RMP rules. */
+#define NIG_REG_LLH1_BRB1_NOT_MCP 0x102dc
+/* [RW 32] cm header for llh1 */
+#define NIG_REG_LLH1_CM_HEADER 0x10080
+#define NIG_REG_LLH1_ERROR_MASK 0x10090
+/* [RW 8] event id for llh1 */
+#define NIG_REG_LLH1_EVENT_ID 0x10088
+/* [RW 8] init credit counter for port1 in LLH */
+#define NIG_REG_LLH1_XCM_INIT_CREDIT 0x10564
+#define NIG_REG_LLH1_XCM_MASK 0x10134
+#define NIG_REG_MASK_INTERRUPT_PORT0 0x10330
+#define NIG_REG_MASK_INTERRUPT_PORT1 0x10334
+/* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */
+#define NIG_REG_NIG_EMAC0_EN 0x1003c
+/* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to the
+ EMAC0 to strip the CRC from the ingress packets. */
+#define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044
+/* [RW 1] Input enable for RX PBF LP IF */
+#define NIG_REG_PBF_LB_IN_EN 0x100b4
+/* [RW 1] output enable for RX parser descriptor IF */
+#define NIG_REG_PRS_EOP_OUT_EN 0x10104
+/* [RW 1] Input enable for RX parser request IF */
+#define NIG_REG_PRS_REQ_IN_EN 0x100b8
+/* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */
+#define NIG_REG_SERDES0_CTRL_PHY_ADDR 0x10374
+/* [R 1] status from serdes0 that inputs to interrupt logic of link status */
+#define NIG_REG_SERDES0_STATUS_LINK_STATUS 0x10578
+/* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
+ for port0 */
+#define NIG_REG_STAT0_BRB_DISCARD 0x105f0
+/* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
+ for port1 */
+#define NIG_REG_STAT1_BRB_DISCARD 0x10628
+/* [WB_R 64] Rx statistics : User octets received for LP */
+#define NIG_REG_STAT2_BRB_OCTET 0x107e0
+#define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328
+#define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c
+/* [RW 1] output enable for RX_XCM0 IF */
+#define NIG_REG_XCM0_OUT_EN 0x100f0
+/* [RW 1] output enable for RX_XCM1 IF */
+#define NIG_REG_XCM1_OUT_EN 0x100f4
+/* [RW 5] control to xgxs - CL45 DEVAD */
+#define NIG_REG_XGXS0_CTRL_MD_DEVAD 0x1033c
+/* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */
+#define NIG_REG_XGXS0_CTRL_PHY_ADDR 0x10340
+/* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */
+#define NIG_REG_XGXS0_STATUS_LINK10G 0x10680
+/* [R 4] status from xgxs0 that inputs to interrupt logic of link status */
+#define NIG_REG_XGXS0_STATUS_LINK_STATUS 0x10684
+/* [RW 2] selection for XGXS lane of port 0 in NIG_MUX block */
+#define NIG_REG_XGXS_LANE_SEL_P0 0x102e8
+/* [RW 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */
+#define NIG_REG_XGXS_SERDES0_MODE_SEL 0x102e0
+#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1<<9)
+#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G (0x1<<15)
+#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS (0xf<<18)
+#define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18
+/* [RW 1] Disable processing further tasks from port 0 (after ending the
+ current task in process). */
+#define PBF_REG_DISABLE_NEW_TASK_PROC_P0 0x14005c
+/* [RW 1] Disable processing further tasks from port 1 (after ending the
+ current task in process). */
+#define PBF_REG_DISABLE_NEW_TASK_PROC_P1 0x140060
+/* [RW 1] Disable processing further tasks from port 4 (after ending the
+ current task in process). */
+#define PBF_REG_DISABLE_NEW_TASK_PROC_P4 0x14006c
+#define PBF_REG_IF_ENABLE_REG 0x140044
+/* [RW 1] Init bit. When set the initial credits are copied to the credit
+ registers (except the port credits). Should be set and then reset after
+ the configuration of the block has ended. */
+#define PBF_REG_INIT 0x140000
+/* [RW 1] Init bit for port 0. When set the initial credit of port 0 is
+ copied to the credit register. Should be set and then reset after the
+ configuration of the port has ended. */
+#define PBF_REG_INIT_P0 0x140004
+/* [RW 1] Init bit for port 1. When set the initial credit of port 1 is
+ copied to the credit register. Should be set and then reset after the
+ configuration of the port has ended. */
+#define PBF_REG_INIT_P1 0x140008
+/* [RW 1] Init bit for port 4. When set the initial credit of port 4 is
+ copied to the credit register. Should be set and then reset after the
+ configuration of the port has ended. */
+#define PBF_REG_INIT_P4 0x14000c
+/* [RW 1] Enable for mac interface 0. */
+#define PBF_REG_MAC_IF0_ENABLE 0x140030
+/* [RW 1] Enable for mac interface 1. */
+#define PBF_REG_MAC_IF1_ENABLE 0x140034
+/* [RW 1] Enable for the loopback interface. */
+#define PBF_REG_MAC_LB_ENABLE 0x140040
+/* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause
+ not suppoterd. */
+#define PBF_REG_P0_ARB_THRSH 0x1400e4
+/* [R 11] Current credit for port 0 in the tx port buffers in 16 byte lines. */
+#define PBF_REG_P0_CREDIT 0x140200
+/* [RW 11] Initial credit for port 0 in the tx port buffers in 16 byte
+ lines. */
+#define PBF_REG_P0_INIT_CRD 0x1400d0
+/* [RW 1] Indication that pause is enabled for port 0. */
+#define PBF_REG_P0_PAUSE_ENABLE 0x140014
+/* [R 8] Number of tasks in port 0 task queue. */
+#define PBF_REG_P0_TASK_CNT 0x140204
+/* [R 11] Current credit for port 1 in the tx port buffers in 16 byte lines. */
+#define PBF_REG_P1_CREDIT 0x140208
+/* [RW 11] Initial credit for port 1 in the tx port buffers in 16 byte
+ lines. */
+#define PBF_REG_P1_INIT_CRD 0x1400d4
+/* [R 8] Number of tasks in port 1 task queue. */
+#define PBF_REG_P1_TASK_CNT 0x14020c
+/* [R 11] Current credit for port 4 in the tx port buffers in 16 byte lines. */
+#define PBF_REG_P4_CREDIT 0x140210
+/* [RW 11] Initial credit for port 4 in the tx port buffers in 16 byte
+ lines. */
+#define PBF_REG_P4_INIT_CRD 0x1400e0
+/* [R 8] Number of tasks in port 4 task queue. */
+#define PBF_REG_P4_TASK_CNT 0x140214
+/* [RW 5] Interrupt mask register #0 read/write */
+#define PBF_REG_PBF_INT_MASK 0x1401d4
+/* [R 5] Interrupt register #0 read */
+#define PBF_REG_PBF_INT_STS 0x1401c8
+#define PB_REG_CONTROL 0
+/* [RW 2] Interrupt mask register #0 read/write */
+#define PB_REG_PB_INT_MASK 0x28
+/* [R 2] Interrupt register #0 read */
+#define PB_REG_PB_INT_STS 0x1c
+/* [RW 4] Parity mask register #0 read/write */
+#define PB_REG_PB_PRTY_MASK 0x38
+#define PRS_REG_A_PRSU_20 0x40134
+/* [R 8] debug only: CFC load request current credit. Transaction based. */
+#define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164
+/* [R 8] debug only: CFC search request current credit. Transaction based. */
+#define PRS_REG_CFC_SEARCH_CURRENT_CREDIT 0x40168
+/* [RW 6] The initial credit for the search message to the CFC interface.
+ Credit is transaction based. */
+#define PRS_REG_CFC_SEARCH_INITIAL_CREDIT 0x4011c
+/* [RW 24] CID for port 0 if no match */
+#define PRS_REG_CID_PORT_0 0x400fc
+#define PRS_REG_CID_PORT_1 0x40100
+/* [RW 32] The CM header for flush message where 'load existed' bit in CFC
+ load response is reset and packet type is 0. Used in packet start message
+ to TCM. */
+#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_0 0x400dc
+#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_1 0x400e0
+#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2 0x400e4
+#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3 0x400e8
+#define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4 0x400ec
+/* [RW 32] The CM header for flush message where 'load existed' bit in CFC
+ load response is set and packet type is 0. Used in packet start message
+ to TCM. */
+#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_0 0x400bc
+#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_1 0x400c0
+#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2 0x400c4
+#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3 0x400c8
+#define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4 0x400cc
+/* [RW 32] The CM header for a match and packet type 1 for loopback port.
+ Used in packet start message to TCM. */
+#define PRS_REG_CM_HDR_LOOPBACK_TYPE_1 0x4009c
+#define PRS_REG_CM_HDR_LOOPBACK_TYPE_2 0x400a0
+#define PRS_REG_CM_HDR_LOOPBACK_TYPE_3 0x400a4
+#define PRS_REG_CM_HDR_LOOPBACK_TYPE_4 0x400a8
+/* [RW 32] The CM header for a match and packet type 0. Used in packet start
+ message to TCM. */
+#define PRS_REG_CM_HDR_TYPE_0 0x40078
+#define PRS_REG_CM_HDR_TYPE_1 0x4007c
+#define PRS_REG_CM_HDR_TYPE_2 0x40080
+#define PRS_REG_CM_HDR_TYPE_3 0x40084
+#define PRS_REG_CM_HDR_TYPE_4 0x40088
+/* [RW 32] The CM header in case there was not a match on the connection */
+#define PRS_REG_CM_NO_MATCH_HDR 0x400b8
+/* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packet
+ start message to TCM. */
+#define PRS_REG_EVENT_ID_1 0x40054
+#define PRS_REG_EVENT_ID_2 0x40058
+#define PRS_REG_EVENT_ID_3 0x4005c
+/* [RW 8] Context region for flush packet with packet type 0. Used in CFC
+ load request message. */
+#define PRS_REG_FLUSH_REGIONS_TYPE_0 0x40004
+#define PRS_REG_FLUSH_REGIONS_TYPE_1 0x40008
+#define PRS_REG_FLUSH_REGIONS_TYPE_2 0x4000c
+#define PRS_REG_FLUSH_REGIONS_TYPE_3 0x40010
+#define PRS_REG_FLUSH_REGIONS_TYPE_4 0x40014
+#define PRS_REG_FLUSH_REGIONS_TYPE_5 0x40018
+#define PRS_REG_FLUSH_REGIONS_TYPE_6 0x4001c
+#define PRS_REG_FLUSH_REGIONS_TYPE_7 0x40020
+/* [RW 4] The increment value to send in the CFC load request message */
+#define PRS_REG_INC_VALUE 0x40048
+/* [RW 1] If set indicates not to send messages to CFC on received packets */
+#define PRS_REG_NIC_MODE 0x40138
+/* [RW 8] The 8-bit event ID for cases where there is no match on the
+ connection. Used in packet start message to TCM. */
+#define PRS_REG_NO_MATCH_EVENT_ID 0x40070
+/* [ST 24] The number of input CFC flush packets */
+#define PRS_REG_NUM_OF_CFC_FLUSH_MESSAGES 0x40128
+/* [ST 32] The number of cycles the Parser halted its operation since it
+ could not allocate the next serial number */
+#define PRS_REG_NUM_OF_DEAD_CYCLES 0x40130
+/* [ST 24] The number of input packets */
+#define PRS_REG_NUM_OF_PACKETS 0x40124
+/* [ST 24] The number of input transparent flush packets */
+#define PRS_REG_NUM_OF_TRANSPARENT_FLUSH_MESSAGES 0x4012c
+/* [RW 8] Context region for received Ethernet packet with a match and
+ packet type 0. Used in CFC load request message */
+#define PRS_REG_PACKET_REGIONS_TYPE_0 0x40028
+#define PRS_REG_PACKET_REGIONS_TYPE_1 0x4002c
+#define PRS_REG_PACKET_REGIONS_TYPE_2 0x40030
+#define PRS_REG_PACKET_REGIONS_TYPE_3 0x40034
+#define PRS_REG_PACKET_REGIONS_TYPE_4 0x40038
+#define PRS_REG_PACKET_REGIONS_TYPE_5 0x4003c
+#define PRS_REG_PACKET_REGIONS_TYPE_6 0x40040
+#define PRS_REG_PACKET_REGIONS_TYPE_7 0x40044
+/* [R 2] debug only: Number of pending requests for CAC on port 0. */
+#define PRS_REG_PENDING_BRB_CAC0_RQ 0x40174
+/* [R 2] debug only: Number of pending requests for header parsing. */
+#define PRS_REG_PENDING_BRB_PRS_RQ 0x40170
+/* [R 1] Interrupt register #0 read */
+#define PRS_REG_PRS_INT_STS 0x40188
+/* [RW 8] Parity mask register #0 read/write */
+#define PRS_REG_PRS_PRTY_MASK 0x401a4
+/* [RW 8] Context region for pure acknowledge packets. Used in CFC load
+ request message */
+#define PRS_REG_PURE_REGIONS 0x40024
+/* [R 32] debug only: Serial number status lsb 32 bits. '1' indicates this
+ serail number was released by SDM but cannot be used because a previous
+ serial number was not released. */
+#define PRS_REG_SERIAL_NUM_STATUS_LSB 0x40154
+/* [R 32] debug only: Serial number status msb 32 bits. '1' indicates this
+ serail number was released by SDM but cannot be used because a previous
+ serial number was not released. */
+#define PRS_REG_SERIAL_NUM_STATUS_MSB 0x40158
+/* [R 4] debug only: SRC current credit. Transaction based. */
+#define PRS_REG_SRC_CURRENT_CREDIT 0x4016c
+/* [R 8] debug only: TCM current credit. Cycle based. */
+#define PRS_REG_TCM_CURRENT_CREDIT 0x40160
+/* [R 8] debug only: TSDM current credit. Transaction based. */
+#define PRS_REG_TSDM_CURRENT_CREDIT 0x4015c
+/* [R 6] Debug only: Number of used entries in the data FIFO */
+#define PXP2_REG_HST_DATA_FIFO_STATUS 0x12047c
+/* [R 7] Debug only: Number of used entries in the header FIFO */
+#define PXP2_REG_HST_HEADER_FIFO_STATUS 0x120478
+#define PXP2_REG_PGL_CONTROL0 0x120490
+#define PXP2_REG_PGL_CONTROL1 0x120514
+/* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask;
+ its[15:0]-address */
+#define PXP2_REG_PGL_INT_CSDM_0 0x1204f4
+#define PXP2_REG_PGL_INT_CSDM_1 0x1204f8
+#define PXP2_REG_PGL_INT_CSDM_2 0x1204fc
+#define PXP2_REG_PGL_INT_CSDM_3 0x120500
+#define PXP2_REG_PGL_INT_CSDM_4 0x120504
+#define PXP2_REG_PGL_INT_CSDM_5 0x120508
+#define PXP2_REG_PGL_INT_CSDM_6 0x12050c
+#define PXP2_REG_PGL_INT_CSDM_7 0x120510
+/* [RW 32] Inbound interrupt table for TSDM: bits[31:16]-mask;
+ its[15:0]-address */
+#define PXP2_REG_PGL_INT_TSDM_0 0x120494
+#define PXP2_REG_PGL_INT_TSDM_1 0x120498
+#define PXP2_REG_PGL_INT_TSDM_2 0x12049c
+#define PXP2_REG_PGL_INT_TSDM_3 0x1204a0
+#define PXP2_REG_PGL_INT_TSDM_4 0x1204a4
+#define PXP2_REG_PGL_INT_TSDM_5 0x1204a8
+#define PXP2_REG_PGL_INT_TSDM_6 0x1204ac
+#define PXP2_REG_PGL_INT_TSDM_7 0x1204b0
+/* [RW 32] Inbound interrupt table for USDM: bits[31:16]-mask;
+ its[15:0]-address */
+#define PXP2_REG_PGL_INT_USDM_0 0x1204b4
+#define PXP2_REG_PGL_INT_USDM_1 0x1204b8
+#define PXP2_REG_PGL_INT_USDM_2 0x1204bc
+#define PXP2_REG_PGL_INT_USDM_3 0x1204c0
+#define PXP2_REG_PGL_INT_USDM_4 0x1204c4
+#define PXP2_REG_PGL_INT_USDM_5 0x1204c8
+#define PXP2_REG_PGL_INT_USDM_6 0x1204cc
+#define PXP2_REG_PGL_INT_USDM_7 0x1204d0
+/* [RW 32] Inbound interrupt table for XSDM: bits[31:16]-mask;
+ its[15:0]-address */
+#define PXP2_REG_PGL_INT_XSDM_0 0x1204d4
+#define PXP2_REG_PGL_INT_XSDM_1 0x1204d8
+#define PXP2_REG_PGL_INT_XSDM_2 0x1204dc
+#define PXP2_REG_PGL_INT_XSDM_3 0x1204e0
+#define PXP2_REG_PGL_INT_XSDM_4 0x1204e4
+#define PXP2_REG_PGL_INT_XSDM_5 0x1204e8
+#define PXP2_REG_PGL_INT_XSDM_6 0x1204ec
+#define PXP2_REG_PGL_INT_XSDM_7 0x1204f0
+/* [R 1] this bit indicates that a read request was blocked because of
+ bus_master_en was deasserted */
+#define PXP2_REG_PGL_READ_BLOCKED 0x120568
+/* [R 6] debug only */
+#define PXP2_REG_PGL_TXR_CDTS 0x120528
+/* [R 18] debug only */
+#define PXP2_REG_PGL_TXW_CDTS 0x12052c
+/* [R 1] this bit indicates that a write request was blocked because of
+ bus_master_en was deasserted */
+#define PXP2_REG_PGL_WRITE_BLOCKED 0x120564
+#define PXP2_REG_PSWRQ_BW_ADD1 0x1201c0
+#define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
+#define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
+#define PXP2_REG_PSWRQ_BW_ADD10 0x1201e4
+#define PXP2_REG_PSWRQ_BW_ADD11 0x1201e8
+#define PXP2_REG_PSWRQ_BW_ADD2 0x1201c4
+#define PXP2_REG_PSWRQ_BW_ADD28 0x120228
+#define PXP2_REG_PSWRQ_BW_ADD28 0x120228
+#define PXP2_REG_PSWRQ_BW_ADD3 0x1201c8
+#define PXP2_REG_PSWRQ_BW_ADD6 0x1201d4
+#define PXP2_REG_PSWRQ_BW_ADD7 0x1201d8
+#define PXP2_REG_PSWRQ_BW_ADD8 0x1201dc
+#define PXP2_REG_PSWRQ_BW_ADD9 0x1201e0
+#define PXP2_REG_PSWRQ_BW_CREDIT 0x12032c
+#define PXP2_REG_PSWRQ_BW_L1 0x1202b0
+#define PXP2_REG_PSWRQ_BW_L10 0x1202d4
+#define PXP2_REG_PSWRQ_BW_L11 0x1202d8
+#define PXP2_REG_PSWRQ_BW_L10 0x1202d4
+#define PXP2_REG_PSWRQ_BW_L11 0x1202d8
+#define PXP2_REG_PSWRQ_BW_L2 0x1202b4
+#define PXP2_REG_PSWRQ_BW_L28 0x120318
+#define PXP2_REG_PSWRQ_BW_L28 0x120318
+#define PXP2_REG_PSWRQ_BW_L3 0x1202b8
+#define PXP2_REG_PSWRQ_BW_L6 0x1202c4
+#define PXP2_REG_PSWRQ_BW_L7 0x1202c8
+#define PXP2_REG_PSWRQ_BW_L8 0x1202cc
+#define PXP2_REG_PSWRQ_BW_L9 0x1202d0
+#define PXP2_REG_PSWRQ_BW_RD 0x120324
+#define PXP2_REG_PSWRQ_BW_UB1 0x120238
+#define PXP2_REG_PSWRQ_BW_UB10 0x12025c
+#define PXP2_REG_PSWRQ_BW_UB11 0x120260
+#define PXP2_REG_PSWRQ_BW_UB10 0x12025c
+#define PXP2_REG_PSWRQ_BW_UB11 0x120260
+#define PXP2_REG_PSWRQ_BW_UB2 0x12023c
+#define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
+#define PXP2_REG_PSWRQ_BW_UB28 0x1202a0
+#define PXP2_REG_PSWRQ_BW_UB3 0x120240
+#define PXP2_REG_PSWRQ_BW_UB6 0x12024c
+#define PXP2_REG_PSWRQ_BW_UB7 0x120250
+#define PXP2_REG_PSWRQ_BW_UB8 0x120254
+#define PXP2_REG_PSWRQ_BW_UB9 0x120258
+#define PXP2_REG_PSWRQ_BW_WR 0x120328
+#define PXP2_REG_PSWRQ_CDU0_L2P 0x120000
+#define PXP2_REG_PSWRQ_QM0_L2P 0x120038
+#define PXP2_REG_PSWRQ_SRC0_L2P 0x120054
+#define PXP2_REG_PSWRQ_TM0_L2P 0x12001c
+/* [RW 25] Interrupt mask register #0 read/write */
+#define PXP2_REG_PXP2_INT_MASK 0x120578
+/* [R 25] Interrupt register #0 read */
+#define PXP2_REG_PXP2_INT_STS 0x12056c
+/* [RC 25] Interrupt register #0 read clear */
+#define PXP2_REG_PXP2_INT_STS_CLR 0x120570
+/* [RW 32] Parity mask register #0 read/write */
+#define PXP2_REG_PXP2_PRTY_MASK_0 0x120588
+#define PXP2_REG_PXP2_PRTY_MASK_1 0x120598
+/* [R 1] Debug only: The 'almost full' indication from each fifo (gives
+ indication about backpressure) */
+#define PXP2_REG_RD_ALMOST_FULL_0 0x120424
+/* [R 8] Debug only: The blocks counter - number of unused block ids */
+#define PXP2_REG_RD_BLK_CNT 0x120418
+/* [RW 8] Debug only: Total number of available blocks in Tetris Buffer.
+ Must be bigger than 6. Normally should not be changed. */
+#define PXP2_REG_RD_BLK_NUM_CFG 0x12040c
+/* [RW 2] CDU byte swapping mode configuration for master read requests */
+#define PXP2_REG_RD_CDURD_SWAP_MODE 0x120404
+/* [RW 1] When '1'; inputs to the PSWRD block are ignored */
+#define PXP2_REG_RD_DISABLE_INPUTS 0x120374
+/* [R 1] PSWRD internal memories initialization is done */
+#define PXP2_REG_RD_INIT_DONE 0x120370
+/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
+ allocated for vq10 */
+#define PXP2_REG_RD_MAX_BLKS_VQ10 0x1203a0
+/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
+ allocated for vq11 */
+#define PXP2_REG_RD_MAX_BLKS_VQ11 0x1203a4
+/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
+ allocated for vq17 */
+#define PXP2_REG_RD_MAX_BLKS_VQ17 0x1203bc
+/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
+ allocated for vq18 */
+#define PXP2_REG_RD_MAX_BLKS_VQ18 0x1203c0
+/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
+ allocated for vq19 */
+#define PXP2_REG_RD_MAX_BLKS_VQ19 0x1203c4
+/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
+ allocated for vq22 */
+#define PXP2_REG_RD_MAX_BLKS_VQ22 0x1203d0
+/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
+ allocated for vq6 */
+#define PXP2_REG_RD_MAX_BLKS_VQ6 0x120390
+/* [RW 8] The maximum number of blocks in Tetris Buffer that can be
+ allocated for vq9 */
+#define PXP2_REG_RD_MAX_BLKS_VQ9 0x12039c
+/* [RW 2] PBF byte swapping mode configuration for master read requests */
+#define PXP2_REG_RD_PBF_SWAP_MODE 0x1203f4
+/* [R 1] Debug only: Indication if delivery ports are idle */
+#define PXP2_REG_RD_PORT_IS_IDLE_0 0x12041c
+#define PXP2_REG_RD_PORT_IS_IDLE_1 0x120420
+/* [RW 2] QM byte swapping mode configuration for master read requests */
+#define PXP2_REG_RD_QM_SWAP_MODE 0x1203f8
+/* [R 7] Debug only: The SR counter - number of unused sub request ids */
+#define PXP2_REG_RD_SR_CNT 0x120414
+/* [RW 2] SRC byte swapping mode configuration for master read requests */
+#define PXP2_REG_RD_SRC_SWAP_MODE 0x120400
+/* [RW 7] Debug only: Total number of available PCI read sub-requests. Must
+ be bigger than 1. Normally should not be changed. */
+#define PXP2_REG_RD_SR_NUM_CFG 0x120408
+/* [RW 1] Signals the PSWRD block to start initializing internal memories */
+#define PXP2_REG_RD_START_INIT 0x12036c
+/* [RW 2] TM byte swapping mode configuration for master read requests */
+#define PXP2_REG_RD_TM_SWAP_MODE 0x1203fc
+/* [RW 10] Bandwidth addition to VQ0 write requests */
+#define PXP2_REG_RQ_BW_RD_ADD0 0x1201bc
+/* [RW 10] Bandwidth addition to VQ12 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD12 0x1201ec
+/* [RW 10] Bandwidth addition to VQ13 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD13 0x1201f0
+/* [RW 10] Bandwidth addition to VQ14 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD14 0x1201f4
+/* [RW 10] Bandwidth addition to VQ15 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD15 0x1201f8
+/* [RW 10] Bandwidth addition to VQ16 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD16 0x1201fc
+/* [RW 10] Bandwidth addition to VQ17 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD17 0x120200
+/* [RW 10] Bandwidth addition to VQ18 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD18 0x120204
+/* [RW 10] Bandwidth addition to VQ19 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD19 0x120208
+/* [RW 10] Bandwidth addition to VQ20 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD20 0x12020c
+/* [RW 10] Bandwidth addition to VQ22 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD22 0x120210
+/* [RW 10] Bandwidth addition to VQ23 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD23 0x120214
+/* [RW 10] Bandwidth addition to VQ24 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD24 0x120218
+/* [RW 10] Bandwidth addition to VQ25 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD25 0x12021c
+/* [RW 10] Bandwidth addition to VQ26 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD26 0x120220
+/* [RW 10] Bandwidth addition to VQ27 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD27 0x120224
+/* [RW 10] Bandwidth addition to VQ4 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD4 0x1201cc
+/* [RW 10] Bandwidth addition to VQ5 read requests */
+#define PXP2_REG_RQ_BW_RD_ADD5 0x1201d0
+/* [RW 10] Bandwidth Typical L for VQ0 Read requests */
+#define PXP2_REG_RQ_BW_RD_L0 0x1202ac
+/* [RW 10] Bandwidth Typical L for VQ12 Read requests */
+#define PXP2_REG_RQ_BW_RD_L12 0x1202dc
+/* [RW 10] Bandwidth Typical L for VQ13 Read requests */
+#define PXP2_REG_RQ_BW_RD_L13 0x1202e0
+/* [RW 10] Bandwidth Typical L for VQ14 Read requests */
+#define PXP2_REG_RQ_BW_RD_L14 0x1202e4
+/* [RW 10] Bandwidth Typical L for VQ15 Read requests */
+#define PXP2_REG_RQ_BW_RD_L15 0x1202e8
+/* [RW 10] Bandwidth Typical L for VQ16 Read requests */
+#define PXP2_REG_RQ_BW_RD_L16 0x1202ec
+/* [RW 10] Bandwidth Typical L for VQ17 Read requests */
+#define PXP2_REG_RQ_BW_RD_L17 0x1202f0
+/* [RW 10] Bandwidth Typical L for VQ18 Read requests */
+#define PXP2_REG_RQ_BW_RD_L18 0x1202f4
+/* [RW 10] Bandwidth Typical L for VQ19 Read requests */
+#define PXP2_REG_RQ_BW_RD_L19 0x1202f8
+/* [RW 10] Bandwidth Typical L for VQ20 Read requests */
+#define PXP2_REG_RQ_BW_RD_L20 0x1202fc
+/* [RW 10] Bandwidth Typical L for VQ22 Read requests */
+#define PXP2_REG_RQ_BW_RD_L22 0x120300
+/* [RW 10] Bandwidth Typical L for VQ23 Read requests */
+#define PXP2_REG_RQ_BW_RD_L23 0x120304
+/* [RW 10] Bandwidth Typical L for VQ24 Read requests */
+#define PXP2_REG_RQ_BW_RD_L24 0x120308
+/* [RW 10] Bandwidth Typical L for VQ25 Read requests */
+#define PXP2_REG_RQ_BW_RD_L25 0x12030c
+/* [RW 10] Bandwidth Typical L for VQ26 Read requests */
+#define PXP2_REG_RQ_BW_RD_L26 0x120310
+/* [RW 10] Bandwidth Typical L for VQ27 Read requests */
+#define PXP2_REG_RQ_BW_RD_L27 0x120314
+/* [RW 10] Bandwidth Typical L for VQ4 Read requests */
+#define PXP2_REG_RQ_BW_RD_L4 0x1202bc
+/* [RW 10] Bandwidth Typical L for VQ5 Read- currently not used */
+#define PXP2_REG_RQ_BW_RD_L5 0x1202c0
+/* [RW 7] Bandwidth upper bound for VQ0 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND0 0x120234
+/* [RW 7] Bandwidth upper bound for VQ12 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND12 0x120264
+/* [RW 7] Bandwidth upper bound for VQ13 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND13 0x120268
+/* [RW 7] Bandwidth upper bound for VQ14 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND14 0x12026c
+/* [RW 7] Bandwidth upper bound for VQ15 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND15 0x120270
+/* [RW 7] Bandwidth upper bound for VQ16 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND16 0x120274
+/* [RW 7] Bandwidth upper bound for VQ17 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND17 0x120278
+/* [RW 7] Bandwidth upper bound for VQ18 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND18 0x12027c
+/* [RW 7] Bandwidth upper bound for VQ19 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND19 0x120280
+/* [RW 7] Bandwidth upper bound for VQ20 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND20 0x120284
+/* [RW 7] Bandwidth upper bound for VQ22 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND22 0x120288
+/* [RW 7] Bandwidth upper bound for VQ23 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND23 0x12028c
+/* [RW 7] Bandwidth upper bound for VQ24 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND24 0x120290
+/* [RW 7] Bandwidth upper bound for VQ25 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND25 0x120294
+/* [RW 7] Bandwidth upper bound for VQ26 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND26 0x120298
+/* [RW 7] Bandwidth upper bound for VQ27 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND27 0x12029c
+/* [RW 7] Bandwidth upper bound for VQ4 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND4 0x120244
+/* [RW 7] Bandwidth upper bound for VQ5 read requests */
+#define PXP2_REG_RQ_BW_RD_UBOUND5 0x120248
+/* [RW 10] Bandwidth addition to VQ29 write requests */
+#define PXP2_REG_RQ_BW_WR_ADD29 0x12022c
+/* [RW 10] Bandwidth addition to VQ30 write requests */
+#define PXP2_REG_RQ_BW_WR_ADD30 0x120230
+/* [RW 10] Bandwidth Typical L for VQ29 Write requests */
+#define PXP2_REG_RQ_BW_WR_L29 0x12031c
+/* [RW 10] Bandwidth Typical L for VQ30 Write requests */
+#define PXP2_REG_RQ_BW_WR_L30 0x120320
+/* [RW 7] Bandwidth upper bound for VQ29 */
+#define PXP2_REG_RQ_BW_WR_UBOUND29 0x1202a4
+/* [RW 7] Bandwidth upper bound for VQ30 */
+#define PXP2_REG_RQ_BW_WR_UBOUND30 0x1202a8
+/* [RW 2] Endian mode for cdu */
+#define PXP2_REG_RQ_CDU_ENDIAN_M 0x1201a0
+/* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k;
+ -128k */
+#define PXP2_REG_RQ_CDU_P_SIZE 0x120018
+/* [R 1] 1' indicates that the requester has finished its internal
+ configuration */
+#define PXP2_REG_RQ_CFG_DONE 0x1201b4
+/* [RW 2] Endian mode for debug */
+#define PXP2_REG_RQ_DBG_ENDIAN_M 0x1201a4
+/* [RW 1] When '1'; requests will enter input buffers but wont get out
+ towards the glue */
+#define PXP2_REG_RQ_DISABLE_INPUTS 0x120330
+/* [RW 2] Endian mode for hc */
+#define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8
+/* [WB 53] Onchip address table */
+#define PXP2_REG_RQ_ONCHIP_AT 0x122000
+/* [RW 2] Endian mode for qm */
+#define PXP2_REG_RQ_QM_ENDIAN_M 0x120194
+/* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
+ -128k */
+#define PXP2_REG_RQ_QM_P_SIZE 0x120050
+/* [RW 1] 1' indicates that the RBC has finished configurating the PSWRQ */
+#define PXP2_REG_RQ_RBC_DONE 0x1201b0
+/* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
+ 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
+#define PXP2_REG_RQ_RD_MBS0 0x120160
+/* [RW 2] Endian mode for src */
+#define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c
+/* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k;
+ -128k */
+#define PXP2_REG_RQ_SRC_P_SIZE 0x12006c
+/* [RW 2] Endian mode for tm */
+#define PXP2_REG_RQ_TM_ENDIAN_M 0x120198
+/* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k;
+ -128k */
+#define PXP2_REG_RQ_TM_P_SIZE 0x120034
+/* [R 5] Number of entries in the ufifo; his fifo has l2p completions */
+#define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY 0x12080c
+/* [R 8] Number of entries occupied by vq 0 in pswrq memory */
+#define PXP2_REG_RQ_VQ0_ENTRY_CNT 0x120810
+/* [R 8] Number of entries occupied by vq 10 in pswrq memory */
+#define PXP2_REG_RQ_VQ10_ENTRY_CNT 0x120818
+/* [R 8] Number of entries occupied by vq 11 in pswrq memory */
+#define PXP2_REG_RQ_VQ11_ENTRY_CNT 0x120820
+/* [R 8] Number of entries occupied by vq 12 in pswrq memory */
+#define PXP2_REG_RQ_VQ12_ENTRY_CNT 0x120828
+/* [R 8] Number of entries occupied by vq 13 in pswrq memory */
+#define PXP2_REG_RQ_VQ13_ENTRY_CNT 0x120830
+/* [R 8] Number of entries occupied by vq 14 in pswrq memory */
+#define PXP2_REG_RQ_VQ14_ENTRY_CNT 0x120838
+/* [R 8] Number of entries occupied by vq 15 in pswrq memory */
+#define PXP2_REG_RQ_VQ15_ENTRY_CNT 0x120840
+/* [R 8] Number of entries occupied by vq 16 in pswrq memory */
+#define PXP2_REG_RQ_VQ16_ENTRY_CNT 0x120848
+/* [R 8] Number of entries occupied by vq 17 in pswrq memory */
+#define PXP2_REG_RQ_VQ17_ENTRY_CNT 0x120850
+/* [R 8] Number of entries occupied by vq 18 in pswrq memory */
+#define PXP2_REG_RQ_VQ18_ENTRY_CNT 0x120858
+/* [R 8] Number of entries occupied by vq 19 in pswrq memory */
+#define PXP2_REG_RQ_VQ19_ENTRY_CNT 0x120860
+/* [R 8] Number of entries occupied by vq 1 in pswrq memory */
+#define PXP2_REG_RQ_VQ1_ENTRY_CNT 0x120868
+/* [R 8] Number of entries occupied by vq 20 in pswrq memory */
+#define PXP2_REG_RQ_VQ20_ENTRY_CNT 0x120870
+/* [R 8] Number of entries occupied by vq 21 in pswrq memory */
+#define PXP2_REG_RQ_VQ21_ENTRY_CNT 0x120878
+/* [R 8] Number of entries occupied by vq 22 in pswrq memory */
+#define PXP2_REG_RQ_VQ22_ENTRY_CNT 0x120880
+/* [R 8] Number of entries occupied by vq 23 in pswrq memory */
+#define PXP2_REG_RQ_VQ23_ENTRY_CNT 0x120888
+/* [R 8] Number of entries occupied by vq 24 in pswrq memory */
+#define PXP2_REG_RQ_VQ24_ENTRY_CNT 0x120890
+/* [R 8] Number of entries occupied by vq 25 in pswrq memory */
+#define PXP2_REG_RQ_VQ25_ENTRY_CNT 0x120898
+/* [R 8] Number of entries occupied by vq 26 in pswrq memory */
+#define PXP2_REG_RQ_VQ26_ENTRY_CNT 0x1208a0
+/* [R 8] Number of entries occupied by vq 27 in pswrq memory */
+#define PXP2_REG_RQ_VQ27_ENTRY_CNT 0x1208a8
+/* [R 8] Number of entries occupied by vq 28 in pswrq memory */
+#define PXP2_REG_RQ_VQ28_ENTRY_CNT 0x1208b0
+/* [R 8] Number of entries occupied by vq 29 in pswrq memory */
+#define PXP2_REG_RQ_VQ29_ENTRY_CNT 0x1208b8
+/* [R 8] Number of entries occupied by vq 2 in pswrq memory */
+#define PXP2_REG_RQ_VQ2_ENTRY_CNT 0x1208c0
+/* [R 8] Number of entries occupied by vq 30 in pswrq memory */
+#define PXP2_REG_RQ_VQ30_ENTRY_CNT 0x1208c8
+/* [R 8] Number of entries occupied by vq 31 in pswrq memory */
+#define PXP2_REG_RQ_VQ31_ENTRY_CNT 0x1208d0
+/* [R 8] Number of entries occupied by vq 3 in pswrq memory */
+#define PXP2_REG_RQ_VQ3_ENTRY_CNT 0x1208d8
+/* [R 8] Number of entries occupied by vq 4 in pswrq memory */
+#define PXP2_REG_RQ_VQ4_ENTRY_CNT 0x1208e0
+/* [R 8] Number of entries occupied by vq 5 in pswrq memory */
+#define PXP2_REG_RQ_VQ5_ENTRY_CNT 0x1208e8
+/* [R 8] Number of entries occupied by vq 6 in pswrq memory */
+#define PXP2_REG_RQ_VQ6_ENTRY_CNT 0x1208f0
+/* [R 8] Number of entries occupied by vq 7 in pswrq memory */
+#define PXP2_REG_RQ_VQ7_ENTRY_CNT 0x1208f8
+/* [R 8] Number of entries occupied by vq 8 in pswrq memory */
+#define PXP2_REG_RQ_VQ8_ENTRY_CNT 0x120900
+/* [R 8] Number of entries occupied by vq 9 in pswrq memory */
+#define PXP2_REG_RQ_VQ9_ENTRY_CNT 0x120908
+/* [RW 3] Max burst size filed for write requests port 0; 000 - 128B;
+ 001:256B; 010: 512B; */
+#define PXP2_REG_RQ_WR_MBS0 0x12015c
+/* [RW 10] if Number of entries in dmae fifo will be higer than this
+ threshold then has_payload indication will be asserted; the default value
+ should be equal to &gt; write MBS size! */
+#define PXP2_REG_WR_DMAE_TH 0x120368
+/* [R 1] debug only: Indication if PSWHST arbiter is idle */
+#define PXP_REG_HST_ARB_IS_IDLE 0x103004
+/* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means
+ this client is waiting for the arbiter. */
+#define PXP_REG_HST_CLIENTS_WAITING_TO_ARB 0x103008
+/* [WB 160] Used for initialization of the inbound interrupts memory */
+#define PXP_REG_HST_INBOUND_INT 0x103800
+/* [RW 32] Interrupt mask register #0 read/write */
+#define PXP_REG_PXP_INT_MASK_0 0x103074
+#define PXP_REG_PXP_INT_MASK_1 0x103084
+/* [R 32] Interrupt register #0 read */
+#define PXP_REG_PXP_INT_STS_0 0x103068
+#define PXP_REG_PXP_INT_STS_1 0x103078
+/* [RC 32] Interrupt register #0 read clear */
+#define PXP_REG_PXP_INT_STS_CLR_0 0x10306c
+/* [RW 26] Parity mask register #0 read/write */
+#define PXP_REG_PXP_PRTY_MASK 0x103094
+/* [RW 4] The activity counter initial increment value sent in the load
+ request */
+#define QM_REG_ACTCTRINITVAL_0 0x168040
+#define QM_REG_ACTCTRINITVAL_1 0x168044
+#define QM_REG_ACTCTRINITVAL_2 0x168048
+#define QM_REG_ACTCTRINITVAL_3 0x16804c
+/* [RW 32] The base logical address (in bytes) of each physical queue. The
+ index I represents the physical queue number. The 12 lsbs are ignore and
+ considered zero so practically there are only 20 bits in this register. */
+#define QM_REG_BASEADDR 0x168900
+/* [RW 16] The byte credit cost for each task. This value is for both ports */
+#define QM_REG_BYTECRDCOST 0x168234
+/* [RW 16] The initial byte credit value for both ports. */
+#define QM_REG_BYTECRDINITVAL 0x168238
+/* [RW 32] A bit per physical queue. If the bit is cleared then the physical
+ queue uses port 0 else it uses port 1. */
+#define QM_REG_BYTECRDPORT_LSB 0x168228
+/* [RW 32] A bit per physical queue. If the bit is cleared then the physical
+ queue uses port 0 else it uses port 1. */
+#define QM_REG_BYTECRDPORT_MSB 0x168224
+/* [RW 16] The byte credit value that if above the QM is considered almost
+ full */
+#define QM_REG_BYTECREDITAFULLTHR 0x168094
+/* [RW 4] The initial credit for interface */
+#define QM_REG_CMINITCRD_0 0x1680cc
+#define QM_REG_CMINITCRD_1 0x1680d0
+#define QM_REG_CMINITCRD_2 0x1680d4
+#define QM_REG_CMINITCRD_3 0x1680d8
+#define QM_REG_CMINITCRD_4 0x1680dc
+#define QM_REG_CMINITCRD_5 0x1680e0
+#define QM_REG_CMINITCRD_6 0x1680e4
+#define QM_REG_CMINITCRD_7 0x1680e8
+/* [RW 8] A mask bit per CM interface. If this bit is 0 then this interface
+ is masked */
+#define QM_REG_CMINTEN 0x1680ec
+/* [RW 12] A bit vector which indicates which one of the queues are tied to
+ interface 0 */
+#define QM_REG_CMINTVOQMASK_0 0x1681f4
+#define QM_REG_CMINTVOQMASK_1 0x1681f8
+#define QM_REG_CMINTVOQMASK_2 0x1681fc
+#define QM_REG_CMINTVOQMASK_3 0x168200
+#define QM_REG_CMINTVOQMASK_4 0x168204
+#define QM_REG_CMINTVOQMASK_5 0x168208
+#define QM_REG_CMINTVOQMASK_6 0x16820c
+#define QM_REG_CMINTVOQMASK_7 0x168210
+/* [RW 20] The number of connections divided by 16 which dictates the size
+ of each queue per port 0 */
+#define QM_REG_CONNNUM_0 0x168020
+/* [R 6] Keep the fill level of the fifo from write client 4 */
+#define QM_REG_CQM_WRC_FIFOLVL 0x168018
+/* [RW 8] The context regions sent in the CFC load request */
+#define QM_REG_CTXREG_0 0x168030
+#define QM_REG_CTXREG_1 0x168034
+#define QM_REG_CTXREG_2 0x168038
+#define QM_REG_CTXREG_3 0x16803c
+/* [RW 12] The VOQ mask used to select the VOQs which needs to be full for
+ bypass enable */
+#define QM_REG_ENBYPVOQMASK 0x16823c
+/* [RW 32] A bit mask per each physical queue. If a bit is set then the
+ physical queue uses the byte credit */
+#define QM_REG_ENBYTECRD_LSB 0x168220
+/* [RW 32] A bit mask per each physical queue. If a bit is set then the
+ physical queue uses the byte credit */
+#define QM_REG_ENBYTECRD_MSB 0x16821c
+/* [RW 4] If cleared then the secondary interface will not be served by the
+ RR arbiter */
+#define QM_REG_ENSEC 0x1680f0
+/* [RW 32] A bit vector per each physical queue which selects which function
+ number to use on PCI access for that queue. */
+#define QM_REG_FUNCNUMSEL_LSB 0x168230
+/* [RW 32] A bit vector per each physical queue which selects which function
+ number to use on PCI access for that queue. */
+#define QM_REG_FUNCNUMSEL_MSB 0x16822c
+/* [RW 32] A mask register to mask the Almost empty signals which will not
+ be use for the almost empty indication to the HW block */
+#define QM_REG_HWAEMPTYMASK_LSB 0x168218
+/* [RW 32] A mask register to mask the Almost empty signals which will not
+ be use for the almost empty indication to the HW block */
+#define QM_REG_HWAEMPTYMASK_MSB 0x168214
+/* [RW 4] The number of outstanding request to CFC */
+#define QM_REG_OUTLDREQ 0x168804
+/* [RC 1] A flag to indicate that overflow error occurred in one of the
+ queues. */
+#define QM_REG_OVFERROR 0x16805c
+/* [RC 6] the Q were the qverflow occurs */
+#define QM_REG_OVFQNUM 0x168058
+/* [R 32] Pause state for physical queues 31-0 */
+#define QM_REG_PAUSESTATE0 0x168410
+/* [R 32] Pause state for physical queues 64-32 */
+#define QM_REG_PAUSESTATE1 0x168414
+/* [RW 2] The PCI attributes field used in the PCI request. */
+#define QM_REG_PCIREQAT 0x168054
+/* [R 16] The byte credit of port 0 */
+#define QM_REG_PORT0BYTECRD 0x168300
+/* [R 16] The byte credit of port 1 */
+#define QM_REG_PORT1BYTECRD 0x168304
+/* [WB 54] Pointer Table Memory; The mapping is as follow: ptrtbl[53:30]
+ read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read bank0;
+ ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
+#define QM_REG_PTRTBL 0x168a00
+/* [RW 2] Interrupt mask register #0 read/write */
+#define QM_REG_QM_INT_MASK 0x168444
+/* [R 2] Interrupt register #0 read */
+#define QM_REG_QM_INT_STS 0x168438
+/* [RW 9] Parity mask register #0 read/write */
+#define QM_REG_QM_PRTY_MASK 0x168454
+/* [R 32] Current queues in pipeline: Queues from 32 to 63 */
+#define QM_REG_QSTATUS_HIGH 0x16802c
+/* [R 32] Current queues in pipeline: Queues from 0 to 31 */
+#define QM_REG_QSTATUS_LOW 0x168028
+/* [R 24] The number of tasks queued for each queue */
+#define QM_REG_QTASKCTR_0 0x168308
+/* [RW 4] Queue tied to VOQ */
+#define QM_REG_QVOQIDX_0 0x1680f4
+#define QM_REG_QVOQIDX_10 0x16811c
+#define QM_REG_QVOQIDX_11 0x168120
+#define QM_REG_QVOQIDX_12 0x168124
+#define QM_REG_QVOQIDX_13 0x168128
+#define QM_REG_QVOQIDX_14 0x16812c
+#define QM_REG_QVOQIDX_15 0x168130
+#define QM_REG_QVOQIDX_16 0x168134
+#define QM_REG_QVOQIDX_17 0x168138
+#define QM_REG_QVOQIDX_21 0x168148
+#define QM_REG_QVOQIDX_25 0x168158
+#define QM_REG_QVOQIDX_29 0x168168
+#define QM_REG_QVOQIDX_32 0x168174
+#define QM_REG_QVOQIDX_33 0x168178
+#define QM_REG_QVOQIDX_34 0x16817c
+#define QM_REG_QVOQIDX_35 0x168180
+#define QM_REG_QVOQIDX_36 0x168184
+#define QM_REG_QVOQIDX_37 0x168188
+#define QM_REG_QVOQIDX_38 0x16818c
+#define QM_REG_QVOQIDX_39 0x168190
+#define QM_REG_QVOQIDX_40 0x168194
+#define QM_REG_QVOQIDX_41 0x168198
+#define QM_REG_QVOQIDX_42 0x16819c
+#define QM_REG_QVOQIDX_43 0x1681a0
+#define QM_REG_QVOQIDX_44 0x1681a4
+#define QM_REG_QVOQIDX_45 0x1681a8
+#define QM_REG_QVOQIDX_46 0x1681ac
+#define QM_REG_QVOQIDX_47 0x1681b0
+#define QM_REG_QVOQIDX_48 0x1681b4
+#define QM_REG_QVOQIDX_49 0x1681b8
+#define QM_REG_QVOQIDX_5 0x168108
+#define QM_REG_QVOQIDX_50 0x1681bc
+#define QM_REG_QVOQIDX_51 0x1681c0
+#define QM_REG_QVOQIDX_52 0x1681c4
+#define QM_REG_QVOQIDX_53 0x1681c8
+#define QM_REG_QVOQIDX_54 0x1681cc
+#define QM_REG_QVOQIDX_55 0x1681d0
+#define QM_REG_QVOQIDX_56 0x1681d4
+#define QM_REG_QVOQIDX_57 0x1681d8
+#define QM_REG_QVOQIDX_58 0x1681dc
+#define QM_REG_QVOQIDX_59 0x1681e0
+#define QM_REG_QVOQIDX_50 0x1681bc
+#define QM_REG_QVOQIDX_51 0x1681c0
+#define QM_REG_QVOQIDX_52 0x1681c4
+#define QM_REG_QVOQIDX_53 0x1681c8
+#define QM_REG_QVOQIDX_54 0x1681cc
+#define QM_REG_QVOQIDX_55 0x1681d0
+#define QM_REG_QVOQIDX_56 0x1681d4
+#define QM_REG_QVOQIDX_57 0x1681d8
+#define QM_REG_QVOQIDX_58 0x1681dc
+#define QM_REG_QVOQIDX_59 0x1681e0
+#define QM_REG_QVOQIDX_6 0x16810c
+#define QM_REG_QVOQIDX_60 0x1681e4
+#define QM_REG_QVOQIDX_61 0x1681e8
+#define QM_REG_QVOQIDX_62 0x1681ec
+#define QM_REG_QVOQIDX_63 0x1681f0
+#define QM_REG_QVOQIDX_60 0x1681e4
+#define QM_REG_QVOQIDX_61 0x1681e8
+#define QM_REG_QVOQIDX_62 0x1681ec
+#define QM_REG_QVOQIDX_63 0x1681f0
+#define QM_REG_QVOQIDX_7 0x168110
+#define QM_REG_QVOQIDX_8 0x168114
+#define QM_REG_QVOQIDX_9 0x168118
+/* [R 24] Remaining pause timeout for port 0 */
+#define QM_REG_REMAINPAUSETM0 0x168418
+/* [R 24] Remaining pause timeout for port 1 */
+#define QM_REG_REMAINPAUSETM1 0x16841c
+/* [RW 1] Initialization bit command */
+#define QM_REG_SOFT_RESET 0x168428
+/* [RW 8] The credit cost per every task in the QM. A value per each VOQ */
+#define QM_REG_TASKCRDCOST_0 0x16809c
+#define QM_REG_TASKCRDCOST_1 0x1680a0
+#define QM_REG_TASKCRDCOST_10 0x1680c4
+#define QM_REG_TASKCRDCOST_11 0x1680c8
+#define QM_REG_TASKCRDCOST_2 0x1680a4
+#define QM_REG_TASKCRDCOST_4 0x1680ac
+#define QM_REG_TASKCRDCOST_5 0x1680b0
+/* [R 6] Keep the fill level of the fifo from write client 3 */
+#define QM_REG_TQM_WRC_FIFOLVL 0x168010
+/* [R 6] Keep the fill level of the fifo from write client 2 */
+#define QM_REG_UQM_WRC_FIFOLVL 0x168008
+/* [RC 32] Credit update error register */
+#define QM_REG_VOQCRDERRREG 0x168408
+/* [R 16] The credit value for each VOQ */
+#define QM_REG_VOQCREDIT_0 0x1682d0
+#define QM_REG_VOQCREDIT_1 0x1682d4
+#define QM_REG_VOQCREDIT_10 0x1682f8
+#define QM_REG_VOQCREDIT_11 0x1682fc
+#define QM_REG_VOQCREDIT_4 0x1682e0
+/* [RW 16] The credit value that if above the QM is considered almost full */
+#define QM_REG_VOQCREDITAFULLTHR 0x168090
+/* [RW 16] The init and maximum credit for each VoQ */
+#define QM_REG_VOQINITCREDIT_0 0x168060
+#define QM_REG_VOQINITCREDIT_1 0x168064
+#define QM_REG_VOQINITCREDIT_10 0x168088
+#define QM_REG_VOQINITCREDIT_11 0x16808c
+#define QM_REG_VOQINITCREDIT_2 0x168068
+#define QM_REG_VOQINITCREDIT_4 0x168070
+#define QM_REG_VOQINITCREDIT_5 0x168074
+/* [RW 1] The port of which VOQ belongs */
+#define QM_REG_VOQPORT_1 0x1682a4
+#define QM_REG_VOQPORT_10 0x1682c8
+#define QM_REG_VOQPORT_11 0x1682cc
+#define QM_REG_VOQPORT_2 0x1682a8
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_0_LSB 0x168240
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_0_MSB 0x168244
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_1_MSB 0x16824c
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_2_LSB 0x168250
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_2_MSB 0x168254
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_3_LSB 0x168258
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_4_LSB 0x168260
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_4_MSB 0x168264
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_5_LSB 0x168268
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_5_MSB 0x16826c
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_6_LSB 0x168270
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_6_MSB 0x168274
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_7_LSB 0x168278
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_7_MSB 0x16827c
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_8_LSB 0x168280
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_8_MSB 0x168284
+/* [RW 32] The physical queue number associated with each VOQ */
+#define QM_REG_VOQQMASK_9_LSB 0x168288
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_0 0x16880c
+#define QM_REG_WRRWEIGHTS_1 0x168810
+#define QM_REG_WRRWEIGHTS_10 0x168814
+#define QM_REG_WRRWEIGHTS_10_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_11 0x168818
+#define QM_REG_WRRWEIGHTS_11_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_12 0x16881c
+#define QM_REG_WRRWEIGHTS_12_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_13 0x168820
+#define QM_REG_WRRWEIGHTS_13_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_14 0x168824
+#define QM_REG_WRRWEIGHTS_14_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_15 0x168828
+#define QM_REG_WRRWEIGHTS_15_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_10 0x168814
+#define QM_REG_WRRWEIGHTS_11 0x168818
+#define QM_REG_WRRWEIGHTS_12 0x16881c
+#define QM_REG_WRRWEIGHTS_13 0x168820
+#define QM_REG_WRRWEIGHTS_14 0x168824
+#define QM_REG_WRRWEIGHTS_15 0x168828
+#define QM_REG_WRRWEIGHTS_2 0x16882c
+#define QM_REG_WRRWEIGHTS_3 0x168830
+#define QM_REG_WRRWEIGHTS_4 0x168834
+#define QM_REG_WRRWEIGHTS_5 0x168838
+#define QM_REG_WRRWEIGHTS_6 0x16883c
+#define QM_REG_WRRWEIGHTS_7 0x168840
+#define QM_REG_WRRWEIGHTS_8 0x168844
+#define QM_REG_WRRWEIGHTS_9 0x168848
+/* [R 6] Keep the fill level of the fifo from write client 1 */
+#define QM_REG_XQM_WRC_FIFOLVL 0x168000
+#define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define DORQ_DORQ_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define DORQ_DORQ_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define DORQ_DORQ_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define DORQ_DORQ_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR (0x1<<0)
+#define NIG_NIG_INT_STS_0_REG_ADDRESS_ERROR_SIZE 0
+#define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define NIG_NIG_INT_STS_CLR_0_REG_ADDRESS_ERROR_SIZE 0
+#define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR (0x1<<0)
+#define NIG_NIG_INT_STS_WR_0_REG_ADDRESS_ERROR_SIZE 0
+#define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR (0x1<<0)
+#define NIG_NIG_INT_MASK_0_REG_ADDRESS_ERROR_SIZE 0
+#define TCM_TCM_INT_STS_REG_ADDRESS_ERROR (0x1<<0)
+#define TCM_TCM_INT_STS_REG_ADDRESS_ERROR_SIZE 0
+#define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR (0x1<<0)
+#define TCM_TCM_INT_STS_CLR_REG_ADDRESS_ERROR_SIZE 0
+#define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR (0x1<<0)
+#define TCM_TCM_INT_STS_WR_REG_ADDRESS_ERROR_SIZE 0
+#define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR (0x1<<0)
+#define TCM_TCM_INT_MASK_REG_ADDRESS_ERROR_SIZE 0
+#define CFC_DEBUG1_REG_WRITE_AC (0x1<<4)
+#define CFC_DEBUG1_REG_WRITE_AC_SIZE 4
+/* [R 1] debug only: This bit indicates wheter indicates that external
+ buffer was wrapped (oldest data was thrown); Relevant only when
+ ~dbg_registers_debug_target=2 (PCI) & ~dbg_registers_full_mode=1 (wrap); */
+#define DBG_REG_WRAP_ON_EXT_BUFFER 0xc124
+#define DBG_REG_WRAP_ON_EXT_BUFFER_SIZE 1
+/* [R 1] debug only: This bit indicates wheter the internal buffer was
+ wrapped (oldest data was thrown) Relevant only when
+ ~dbg_registers_debug_target=0 (internal buffer) */
+#define DBG_REG_WRAP_ON_INT_BUFFER 0xc128
+#define DBG_REG_WRAP_ON_INT_BUFFER_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_0 0x16880c
+#define QM_REG_WRRWEIGHTS_0_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_1 0x168810
+#define QM_REG_WRRWEIGHTS_1_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_10 0x168814
+#define QM_REG_WRRWEIGHTS_10_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_11 0x168818
+#define QM_REG_WRRWEIGHTS_11_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_12 0x16881c
+#define QM_REG_WRRWEIGHTS_12_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_13 0x168820
+#define QM_REG_WRRWEIGHTS_13_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_14 0x168824
+#define QM_REG_WRRWEIGHTS_14_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_15 0x168828
+#define QM_REG_WRRWEIGHTS_15_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_2 0x16882c
+#define QM_REG_WRRWEIGHTS_2_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_3 0x168830
+#define QM_REG_WRRWEIGHTS_3_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_4 0x168834
+#define QM_REG_WRRWEIGHTS_4_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_5 0x168838
+#define QM_REG_WRRWEIGHTS_5_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_6 0x16883c
+#define QM_REG_WRRWEIGHTS_6_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_7 0x168840
+#define QM_REG_WRRWEIGHTS_7_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_8 0x168844
+#define QM_REG_WRRWEIGHTS_8_SIZE 1
+/* [RW 32] Wrr weights */
+#define QM_REG_WRRWEIGHTS_9 0x168848
+#define QM_REG_WRRWEIGHTS_9_SIZE 1
+/* [RW 22] Number of free element in the free list of T2 entries - port 0. */
+#define SRC_REG_COUNTFREE0 0x40500
+/* [WB 64] First free element in the free list of T2 entries - port 0. */
+#define SRC_REG_FIRSTFREE0 0x40510
+#define SRC_REG_KEYRSS0_0 0x40408
+#define SRC_REG_KEYRSS1_9 0x40454
+/* [WB 64] Last free element in the free list of T2 entries - port 0. */
+#define SRC_REG_LASTFREE0 0x40530
+/* [RW 5] The number of hash bits used for the search (h); Values can be 8
+ to 24. */
+#define SRC_REG_NUMBER_HASH_BITS0 0x40400
+/* [RW 1] Reset internal state machines. */
+#define SRC_REG_SOFT_RST 0x4049c
+/* [R 1] Interrupt register #0 read */
+#define SRC_REG_SRC_INT_STS 0x404ac
+/* [RW 3] Parity mask register #0 read/write */
+#define SRC_REG_SRC_PRTY_MASK 0x404c8
+/* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
+#define TCM_REG_CAM_OCCUP 0x5017c
+/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
+ disregarded; valid output is deasserted; all other signals are treated as
+ usual; if 1 - normal activity. */
+#define TCM_REG_CDU_AG_RD_IFEN 0x50034
+/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
+ are disregarded; all other signals are treated as usual; if 1 - normal
+ activity. */
+#define TCM_REG_CDU_AG_WR_IFEN 0x50030
+/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
+ disregarded; valid output is deasserted; all other signals are treated as
+ usual; if 1 - normal activity. */
+#define TCM_REG_CDU_SM_RD_IFEN 0x5003c
+/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
+ input is disregarded; all other signals are treated as usual; if 1 -
+ normal activity. */
+#define TCM_REG_CDU_SM_WR_IFEN 0x50038
+/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
+ the initial credit value; read returns the current value of the credit
+ counter. Must be initialized to 1 at start-up. */
+#define TCM_REG_CFC_INIT_CRD 0x50204
+/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define TCM_REG_CP_WEIGHT 0x500c0
+/* [RW 1] Input csem Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define TCM_REG_CSEM_IFEN 0x5002c
+/* [RC 1] Message length mismatch (relative to last indication) at the In#9
+ interface. */
+#define TCM_REG_CSEM_LENGTH_MIS 0x50174
+/* [RW 8] The Event ID in case of ErrorFlg is set in the input message. */
+#define TCM_REG_ERR_EVNT_ID 0x500a0
+/* [RW 28] The CM erroneous header for QM and Timers formatting. */
+#define TCM_REG_ERR_TCM_HDR 0x5009c
+/* [RW 8] The Event ID for Timers expiration. */
+#define TCM_REG_EXPR_EVNT_ID 0x500a4
+/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
+ writes the initial credit value; read returns the current value of the
+ credit counter. Must be initialized to 64 at start-up. */
+#define TCM_REG_FIC0_INIT_CRD 0x5020c
+/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
+ writes the initial credit value; read returns the current value of the
+ credit counter. Must be initialized to 64 at start-up. */
+#define TCM_REG_FIC1_INIT_CRD 0x50210
+/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
+ - strict priority defined by ~tcm_registers_gr_ag_pr.gr_ag_pr;
+ ~tcm_registers_gr_ld0_pr.gr_ld0_pr and
+ ~tcm_registers_gr_ld1_pr.gr_ld1_pr. */
+#define TCM_REG_GR_ARB_TYPE 0x50114
+/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
+ highest priority is 3. It is supposed that the Store channel is the
+ compliment of the other 3 groups. */
+#define TCM_REG_GR_LD0_PR 0x5011c
+/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
+ highest priority is 3. It is supposed that the Store channel is the
+ compliment of the other 3 groups. */
+#define TCM_REG_GR_LD1_PR 0x50120
+/* [RW 4] The number of double REG-pairs; loaded from the STORM context and
+ sent to STORM; for a specific connection type. The double REG-pairs are
+ used to align to STORM context row size of 128 bits. The offset of these
+ data in the STORM context is always 0. Index _i stands for the connection
+ type (one of 16). */
+#define TCM_REG_N_SM_CTX_LD_0 0x50050
+#define TCM_REG_N_SM_CTX_LD_1 0x50054
+#define TCM_REG_N_SM_CTX_LD_10 0x50078
+#define TCM_REG_N_SM_CTX_LD_11 0x5007c
+#define TCM_REG_N_SM_CTX_LD_12 0x50080
+#define TCM_REG_N_SM_CTX_LD_13 0x50084
+#define TCM_REG_N_SM_CTX_LD_14 0x50088
+#define TCM_REG_N_SM_CTX_LD_15 0x5008c
+#define TCM_REG_N_SM_CTX_LD_2 0x50058
+#define TCM_REG_N_SM_CTX_LD_3 0x5005c
+#define TCM_REG_N_SM_CTX_LD_4 0x50060
+/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define TCM_REG_PBF_IFEN 0x50024
+/* [RC 1] Message length mismatch (relative to last indication) at the In#7
+ interface. */
+#define TCM_REG_PBF_LENGTH_MIS 0x5016c
+/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define TCM_REG_PBF_WEIGHT 0x500b4
+/* [RW 6] The physical queue number 0 per port index. */
+#define TCM_REG_PHYS_QNUM0_0 0x500e0
+#define TCM_REG_PHYS_QNUM0_1 0x500e4
+/* [RW 6] The physical queue number 1 per port index. */
+#define TCM_REG_PHYS_QNUM1_0 0x500e8
+/* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define TCM_REG_PRS_IFEN 0x50020
+/* [RC 1] Message length mismatch (relative to last indication) at the In#6
+ interface. */
+#define TCM_REG_PRS_LENGTH_MIS 0x50168
+/* [RW 3] The weight of the input prs in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define TCM_REG_PRS_WEIGHT 0x500b0
+/* [RW 8] The Event ID for Timers formatting in case of stop done. */
+#define TCM_REG_STOP_EVNT_ID 0x500a8
+/* [RC 1] Message length mismatch (relative to last indication) at the STORM
+ interface. */
+#define TCM_REG_STORM_LENGTH_MIS 0x50160
+/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define TCM_REG_STORM_TCM_IFEN 0x50010
+/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define TCM_REG_TCM_CFC_IFEN 0x50040
+/* [RW 11] Interrupt mask register #0 read/write */
+#define TCM_REG_TCM_INT_MASK 0x501dc
+/* [R 11] Interrupt register #0 read */
+#define TCM_REG_TCM_INT_STS 0x501d0
+/* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
+ REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
+ Is used to determine the number of the AG context REG-pairs written back;
+ when the input message Reg1WbFlg isn't set. */
+#define TCM_REG_TCM_REG0_SZ 0x500d8
+/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
+ disregarded; valid is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define TCM_REG_TCM_STORM0_IFEN 0x50004
+/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
+ disregarded; valid is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define TCM_REG_TCM_STORM1_IFEN 0x50008
+/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
+ disregarded; valid is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define TCM_REG_TCM_TQM_IFEN 0x5000c
+/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
+#define TCM_REG_TCM_TQM_USE_Q 0x500d4
+/* [RW 28] The CM header for Timers expiration command. */
+#define TCM_REG_TM_TCM_HDR 0x50098
+/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define TCM_REG_TM_TCM_IFEN 0x5001c
+/* [RW 6] QM output initial credit. Max credit available - 32.Write writes
+ the initial credit value; read returns the current value of the credit
+ counter. Must be initialized to 32 at start-up. */
+#define TCM_REG_TQM_INIT_CRD 0x5021c
+/* [RW 28] The CM header value for QM request (primary). */
+#define TCM_REG_TQM_TCM_HDR_P 0x50090
+/* [RW 28] The CM header value for QM request (secondary). */
+#define TCM_REG_TQM_TCM_HDR_S 0x50094
+/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define TCM_REG_TQM_TCM_IFEN 0x50014
+/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define TCM_REG_TSDM_IFEN 0x50018
+/* [RC 1] Message length mismatch (relative to last indication) at the SDM
+ interface. */
+#define TCM_REG_TSDM_LENGTH_MIS 0x50164
+/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define TCM_REG_TSDM_WEIGHT 0x500c4
+/* [RW 1] Input usem Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define TCM_REG_USEM_IFEN 0x50028
+/* [RC 1] Message length mismatch (relative to last indication) at the In#8
+ interface. */
+#define TCM_REG_USEM_LENGTH_MIS 0x50170
+/* [RW 21] Indirect access to the descriptor table of the XX protection
+ mechanism. The fields are: [5:0] - length of the message; 15:6] - message
+ pointer; 20:16] - next pointer. */
+#define TCM_REG_XX_DESCR_TABLE 0x50280
+/* [R 6] Use to read the value of XX protection Free counter. */
+#define TCM_REG_XX_FREE 0x50178
+/* [RW 6] Initial value for the credit counter; responsible for fulfilling
+ of the Input Stage XX protection buffer by the XX protection pending
+ messages. Max credit available - 127.Write writes the initial credit
+ value; read returns the current value of the credit counter. Must be
+ initialized to 19 at start-up. */
+#define TCM_REG_XX_INIT_CRD 0x50220
+/* [RW 6] Maximum link list size (messages locked) per connection in the XX
+ protection. */
+#define TCM_REG_XX_MAX_LL_SZ 0x50044
+/* [RW 6] The maximum number of pending messages; which may be stored in XX
+ protection. ~tcm_registers_xx_free.xx_free is read on read. */
+#define TCM_REG_XX_MSG_NUM 0x50224
+/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
+#define TCM_REG_XX_OVFL_EVNT_ID 0x50048
+/* [RW 16] Indirect access to the XX table of the XX protection mechanism.
+ The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] -
+ header pointer. */
+#define TCM_REG_XX_TABLE 0x50240
+/* [RW 4] Load value for for cfc ac credit cnt. */
+#define TM_REG_CFC_AC_CRDCNT_VAL 0x164208
+/* [RW 4] Load value for cfc cld credit cnt. */
+#define TM_REG_CFC_CLD_CRDCNT_VAL 0x164210
+/* [RW 8] Client0 context region. */
+#define TM_REG_CL0_CONT_REGION 0x164030
+/* [RW 8] Client1 context region. */
+#define TM_REG_CL1_CONT_REGION 0x164034
+/* [RW 8] Client2 context region. */
+#define TM_REG_CL2_CONT_REGION 0x164038
+/* [RW 2] Client in High priority client number. */
+#define TM_REG_CLIN_PRIOR0_CLIENT 0x164024
+/* [RW 4] Load value for clout0 cred cnt. */
+#define TM_REG_CLOUT_CRDCNT0_VAL 0x164220
+/* [RW 4] Load value for clout1 cred cnt. */
+#define TM_REG_CLOUT_CRDCNT1_VAL 0x164228
+/* [RW 4] Load value for clout2 cred cnt. */
+#define TM_REG_CLOUT_CRDCNT2_VAL 0x164230
+/* [RW 1] Enable client0 input. */
+#define TM_REG_EN_CL0_INPUT 0x164008
+/* [RW 1] Enable client1 input. */
+#define TM_REG_EN_CL1_INPUT 0x16400c
+/* [RW 1] Enable client2 input. */
+#define TM_REG_EN_CL2_INPUT 0x164010
+/* [RW 1] Enable real time counter. */
+#define TM_REG_EN_REAL_TIME_CNT 0x1640d8
+/* [RW 1] Enable for Timers state machines. */
+#define TM_REG_EN_TIMERS 0x164000
+/* [RW 4] Load value for expiration credit cnt. CFC max number of
+ outstanding load requests for timers (expiration) context loading. */
+#define TM_REG_EXP_CRDCNT_VAL 0x164238
+/* [RW 18] Linear0 Max active cid. */
+#define TM_REG_LIN0_MAX_ACTIVE_CID 0x164048
+/* [WB 64] Linear0 phy address. */
+#define TM_REG_LIN0_PHY_ADDR 0x164270
+/* [RW 24] Linear0 array scan timeout. */
+#define TM_REG_LIN0_SCAN_TIME 0x16403c
+/* [WB 64] Linear1 phy address. */
+#define TM_REG_LIN1_PHY_ADDR 0x164280
+/* [RW 6] Linear timer set_clear fifo threshold. */
+#define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR 0x164070
+/* [RW 2] Load value for pci arbiter credit cnt. */
+#define TM_REG_PCIARB_CRDCNT_VAL 0x164260
+/* [RW 1] Timer software reset - active high. */
+#define TM_REG_TIMER_SOFT_RST 0x164004
+/* [RW 20] The amount of hardware cycles for each timer tick. */
+#define TM_REG_TIMER_TICK_SIZE 0x16401c
+/* [RW 8] Timers Context region. */
+#define TM_REG_TM_CONTEXT_REGION 0x164044
+/* [RW 1] Interrupt mask register #0 read/write */
+#define TM_REG_TM_INT_MASK 0x1640fc
+/* [R 1] Interrupt register #0 read */
+#define TM_REG_TM_INT_STS 0x1640f0
+/* [RW 8] The event id for aggregated interrupt 0 */
+#define TSDM_REG_AGG_INT_EVENT_0 0x42038
+/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
+#define TSDM_REG_CFC_RSP_START_ADDR 0x42008
+/* [RW 16] The maximum value of the competion counter #0 */
+#define TSDM_REG_CMP_COUNTER_MAX0 0x4201c
+/* [RW 16] The maximum value of the competion counter #1 */
+#define TSDM_REG_CMP_COUNTER_MAX1 0x42020
+/* [RW 16] The maximum value of the competion counter #2 */
+#define TSDM_REG_CMP_COUNTER_MAX2 0x42024
+/* [RW 16] The maximum value of the competion counter #3 */
+#define TSDM_REG_CMP_COUNTER_MAX3 0x42028
+/* [RW 13] The start address in the internal RAM for the completion
+ counters. */
+#define TSDM_REG_CMP_COUNTER_START_ADDR 0x4200c
+#define TSDM_REG_ENABLE_IN1 0x42238
+#define TSDM_REG_ENABLE_IN2 0x4223c
+#define TSDM_REG_ENABLE_OUT1 0x42240
+#define TSDM_REG_ENABLE_OUT2 0x42244
+/* [RW 4] The initial number of messages that can be sent to the pxp control
+ interface without receiving any ACK. */
+#define TSDM_REG_INIT_CREDIT_PXP_CTRL 0x424bc
+/* [ST 32] The number of ACK after placement messages received */
+#define TSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x4227c
+/* [ST 32] The number of packet end messages received from the parser */
+#define TSDM_REG_NUM_OF_PKT_END_MSG 0x42274
+/* [ST 32] The number of requests received from the pxp async if */
+#define TSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x42278
+/* [ST 32] The number of commands received in queue 0 */
+#define TSDM_REG_NUM_OF_Q0_CMD 0x42248
+/* [ST 32] The number of commands received in queue 10 */
+#define TSDM_REG_NUM_OF_Q10_CMD 0x4226c
+/* [ST 32] The number of commands received in queue 11 */
+#define TSDM_REG_NUM_OF_Q11_CMD 0x42270
+/* [ST 32] The number of commands received in queue 1 */
+#define TSDM_REG_NUM_OF_Q1_CMD 0x4224c
+/* [ST 32] The number of commands received in queue 3 */
+#define TSDM_REG_NUM_OF_Q3_CMD 0x42250
+/* [ST 32] The number of commands received in queue 4 */
+#define TSDM_REG_NUM_OF_Q4_CMD 0x42254
+/* [ST 32] The number of commands received in queue 5 */
+#define TSDM_REG_NUM_OF_Q5_CMD 0x42258
+/* [ST 32] The number of commands received in queue 6 */
+#define TSDM_REG_NUM_OF_Q6_CMD 0x4225c
+/* [ST 32] The number of commands received in queue 7 */
+#define TSDM_REG_NUM_OF_Q7_CMD 0x42260
+/* [ST 32] The number of commands received in queue 8 */
+#define TSDM_REG_NUM_OF_Q8_CMD 0x42264
+/* [ST 32] The number of commands received in queue 9 */
+#define TSDM_REG_NUM_OF_Q9_CMD 0x42268
+/* [RW 13] The start address in the internal RAM for the packet end message */
+#define TSDM_REG_PCK_END_MSG_START_ADDR 0x42014
+/* [RW 13] The start address in the internal RAM for queue counters */
+#define TSDM_REG_Q_COUNTER_START_ADDR 0x42010
+/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
+#define TSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x42548
+/* [R 1] parser fifo empty in sdm_sync block */
+#define TSDM_REG_SYNC_PARSER_EMPTY 0x42550
+/* [R 1] parser serial fifo empty in sdm_sync block */
+#define TSDM_REG_SYNC_SYNC_EMPTY 0x42558
+/* [RW 32] Tick for timer counter. Applicable only when
+ ~tsdm_registers_timer_tick_enable.timer_tick_enable =1 */
+#define TSDM_REG_TIMER_TICK 0x42000
+/* [RW 32] Interrupt mask register #0 read/write */
+#define TSDM_REG_TSDM_INT_MASK_0 0x4229c
+#define TSDM_REG_TSDM_INT_MASK_1 0x422ac
+/* [RW 11] Parity mask register #0 read/write */
+#define TSDM_REG_TSDM_PRTY_MASK 0x422bc
+/* [RW 5] The number of time_slots in the arbitration cycle */
+#define TSEM_REG_ARB_CYCLE_SIZE 0x180034
+/* [RW 3] The source that is associated with arbitration element 0. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2 */
+#define TSEM_REG_ARB_ELEMENT0 0x180020
+/* [RW 3] The source that is associated with arbitration element 1. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.
+ Could not be equal to register ~tsem_registers_arb_element0.arb_element0 */
+#define TSEM_REG_ARB_ELEMENT1 0x180024
+/* [RW 3] The source that is associated with arbitration element 2. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.
+ Could not be equal to register ~tsem_registers_arb_element0.arb_element0
+ and ~tsem_registers_arb_element1.arb_element1 */
+#define TSEM_REG_ARB_ELEMENT2 0x180028
+/* [RW 3] The source that is associated with arbitration element 3. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
+ not be equal to register ~tsem_registers_arb_element0.arb_element0 and
+ ~tsem_registers_arb_element1.arb_element1 and
+ ~tsem_registers_arb_element2.arb_element2 */
+#define TSEM_REG_ARB_ELEMENT3 0x18002c
+/* [RW 3] The source that is associated with arbitration element 4. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.
+ Could not be equal to register ~tsem_registers_arb_element0.arb_element0
+ and ~tsem_registers_arb_element1.arb_element1 and
+ ~tsem_registers_arb_element2.arb_element2 and
+ ~tsem_registers_arb_element3.arb_element3 */
+#define TSEM_REG_ARB_ELEMENT4 0x180030
+#define TSEM_REG_ENABLE_IN 0x1800a4
+#define TSEM_REG_ENABLE_OUT 0x1800a8
+/* [RW 32] This address space contains all registers and memories that are
+ placed in SEM_FAST block. The SEM_FAST registers are described in
+ appendix B. In order to access the SEM_FAST registers the base address
+ TSEM_REGISTERS_FAST_MEMORY (Offset: 0x1a0000) should be added to each
+ SEM_FAST register offset. */
+#define TSEM_REG_FAST_MEMORY 0x1a0000
+/* [RW 1] Disables input messages from FIC0 May be updated during run_time
+ by the microcode */
+#define TSEM_REG_FIC0_DISABLE 0x180224
+/* [RW 1] Disables input messages from FIC1 May be updated during run_time
+ by the microcode */
+#define TSEM_REG_FIC1_DISABLE 0x180234
+/* [RW 15] Interrupt table Read and write access to it is not possible in
+ the middle of the work */
+#define TSEM_REG_INT_TABLE 0x180400
+/* [ST 24] Statistics register. The number of messages that entered through
+ FIC0 */
+#define TSEM_REG_MSG_NUM_FIC0 0x180000
+/* [ST 24] Statistics register. The number of messages that entered through
+ FIC1 */
+#define TSEM_REG_MSG_NUM_FIC1 0x180004
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC0 */
+#define TSEM_REG_MSG_NUM_FOC0 0x180008
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC1 */
+#define TSEM_REG_MSG_NUM_FOC1 0x18000c
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC2 */
+#define TSEM_REG_MSG_NUM_FOC2 0x180010
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC3 */
+#define TSEM_REG_MSG_NUM_FOC3 0x180014
+/* [RW 1] Disables input messages from the passive buffer May be updated
+ during run_time by the microcode */
+#define TSEM_REG_PAS_DISABLE 0x18024c
+/* [WB 128] Debug only. Passive buffer memory */
+#define TSEM_REG_PASSIVE_BUFFER 0x181000
+/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
+#define TSEM_REG_PRAM 0x1c0000
+/* [R 8] Valid sleeping threads indication have bit per thread */
+#define TSEM_REG_SLEEP_THREADS_VALID 0x18026c
+/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
+#define TSEM_REG_SLOW_EXT_STORE_EMPTY 0x1802a0
+/* [RW 8] List of free threads . There is a bit per thread. */
+#define TSEM_REG_THREADS_LIST 0x1802e4
+/* [RW 3] The arbitration scheme of time_slot 0 */
+#define TSEM_REG_TS_0_AS 0x180038
+/* [RW 3] The arbitration scheme of time_slot 10 */
+#define TSEM_REG_TS_10_AS 0x180060
+/* [RW 3] The arbitration scheme of time_slot 11 */
+#define TSEM_REG_TS_11_AS 0x180064
+/* [RW 3] The arbitration scheme of time_slot 12 */
+#define TSEM_REG_TS_12_AS 0x180068
+/* [RW 3] The arbitration scheme of time_slot 13 */
+#define TSEM_REG_TS_13_AS 0x18006c
+/* [RW 3] The arbitration scheme of time_slot 14 */
+#define TSEM_REG_TS_14_AS 0x180070
+/* [RW 3] The arbitration scheme of time_slot 15 */
+#define TSEM_REG_TS_15_AS 0x180074
+/* [RW 3] The arbitration scheme of time_slot 16 */
+#define TSEM_REG_TS_16_AS 0x180078
+/* [RW 3] The arbitration scheme of time_slot 17 */
+#define TSEM_REG_TS_17_AS 0x18007c
+/* [RW 3] The arbitration scheme of time_slot 18 */
+#define TSEM_REG_TS_18_AS 0x180080
+/* [RW 3] The arbitration scheme of time_slot 1 */
+#define TSEM_REG_TS_1_AS 0x18003c
+/* [RW 3] The arbitration scheme of time_slot 2 */
+#define TSEM_REG_TS_2_AS 0x180040
+/* [RW 3] The arbitration scheme of time_slot 3 */
+#define TSEM_REG_TS_3_AS 0x180044
+/* [RW 3] The arbitration scheme of time_slot 4 */
+#define TSEM_REG_TS_4_AS 0x180048
+/* [RW 3] The arbitration scheme of time_slot 5 */
+#define TSEM_REG_TS_5_AS 0x18004c
+/* [RW 3] The arbitration scheme of time_slot 6 */
+#define TSEM_REG_TS_6_AS 0x180050
+/* [RW 3] The arbitration scheme of time_slot 7 */
+#define TSEM_REG_TS_7_AS 0x180054
+/* [RW 3] The arbitration scheme of time_slot 8 */
+#define TSEM_REG_TS_8_AS 0x180058
+/* [RW 3] The arbitration scheme of time_slot 9 */
+#define TSEM_REG_TS_9_AS 0x18005c
+/* [RW 32] Interrupt mask register #0 read/write */
+#define TSEM_REG_TSEM_INT_MASK_0 0x180100
+#define TSEM_REG_TSEM_INT_MASK_1 0x180110
+/* [RW 32] Parity mask register #0 read/write */
+#define TSEM_REG_TSEM_PRTY_MASK_0 0x180120
+#define TSEM_REG_TSEM_PRTY_MASK_1 0x180130
+/* [R 5] Used to read the XX protection CAM occupancy counter. */
+#define UCM_REG_CAM_OCCUP 0xe0170
+/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
+ disregarded; valid output is deasserted; all other signals are treated as
+ usual; if 1 - normal activity. */
+#define UCM_REG_CDU_AG_RD_IFEN 0xe0038
+/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
+ are disregarded; all other signals are treated as usual; if 1 - normal
+ activity. */
+#define UCM_REG_CDU_AG_WR_IFEN 0xe0034
+/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
+ disregarded; valid output is deasserted; all other signals are treated as
+ usual; if 1 - normal activity. */
+#define UCM_REG_CDU_SM_RD_IFEN 0xe0040
+/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
+ input is disregarded; all other signals are treated as usual; if 1 -
+ normal activity. */
+#define UCM_REG_CDU_SM_WR_IFEN 0xe003c
+/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
+ the initial credit value; read returns the current value of the credit
+ counter. Must be initialized to 1 at start-up. */
+#define UCM_REG_CFC_INIT_CRD 0xe0204
+/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define UCM_REG_CP_WEIGHT 0xe00c4
+/* [RW 1] Input csem Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define UCM_REG_CSEM_IFEN 0xe0028
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ at the csem interface is detected. */
+#define UCM_REG_CSEM_LENGTH_MIS 0xe0160
+/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define UCM_REG_CSEM_WEIGHT 0xe00b8
+/* [RW 1] Input dorq Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define UCM_REG_DORQ_IFEN 0xe0030
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ at the dorq interface is detected. */
+#define UCM_REG_DORQ_LENGTH_MIS 0xe0168
+/* [RW 8] The Event ID in case ErrorFlg input message bit is set. */
+#define UCM_REG_ERR_EVNT_ID 0xe00a4
+/* [RW 28] The CM erroneous header for QM and Timers formatting. */
+#define UCM_REG_ERR_UCM_HDR 0xe00a0
+/* [RW 8] The Event ID for Timers expiration. */
+#define UCM_REG_EXPR_EVNT_ID 0xe00a8
+/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
+ writes the initial credit value; read returns the current value of the
+ credit counter. Must be initialized to 64 at start-up. */
+#define UCM_REG_FIC0_INIT_CRD 0xe020c
+/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
+ writes the initial credit value; read returns the current value of the
+ credit counter. Must be initialized to 64 at start-up. */
+#define UCM_REG_FIC1_INIT_CRD 0xe0210
+/* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
+ - strict priority defined by ~ucm_registers_gr_ag_pr.gr_ag_pr;
+ ~ucm_registers_gr_ld0_pr.gr_ld0_pr and
+ ~ucm_registers_gr_ld1_pr.gr_ld1_pr. */
+#define UCM_REG_GR_ARB_TYPE 0xe0144
+/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
+ highest priority is 3. It is supposed that the Store channel group is
+ compliment to the others. */
+#define UCM_REG_GR_LD0_PR 0xe014c
+/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
+ highest priority is 3. It is supposed that the Store channel group is
+ compliment to the others. */
+#define UCM_REG_GR_LD1_PR 0xe0150
+/* [RW 2] The queue index for invalidate counter flag decision. */
+#define UCM_REG_INV_CFLG_Q 0xe00e4
+/* [RW 5] The number of double REG-pairs; loaded from the STORM context and
+ sent to STORM; for a specific connection type. the double REG-pairs are
+ used in order to align to STORM context row size of 128 bits. The offset
+ of these data in the STORM context is always 0. Index _i stands for the
+ connection type (one of 16). */
+#define UCM_REG_N_SM_CTX_LD_0 0xe0054
+#define UCM_REG_N_SM_CTX_LD_1 0xe0058
+#define UCM_REG_N_SM_CTX_LD_10 0xe007c
+#define UCM_REG_N_SM_CTX_LD_11 0xe0080
+#define UCM_REG_N_SM_CTX_LD_12 0xe0084
+#define UCM_REG_N_SM_CTX_LD_13 0xe0088
+#define UCM_REG_N_SM_CTX_LD_14 0xe008c
+#define UCM_REG_N_SM_CTX_LD_15 0xe0090
+#define UCM_REG_N_SM_CTX_LD_2 0xe005c
+#define UCM_REG_N_SM_CTX_LD_3 0xe0060
+#define UCM_REG_N_SM_CTX_LD_4 0xe0064
+/* [RW 6] The physical queue number 0 per port index (CID[23]) */
+#define UCM_REG_PHYS_QNUM0_0 0xe0110
+#define UCM_REG_PHYS_QNUM0_1 0xe0114
+/* [RW 6] The physical queue number 1 per port index (CID[23]) */
+#define UCM_REG_PHYS_QNUM1_0 0xe0118
+#define UCM_REG_PHYS_QNUM1_1 0xe011c
+/* [RW 8] The Event ID for Timers formatting in case of stop done. */
+#define UCM_REG_STOP_EVNT_ID 0xe00ac
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ at the STORM interface is detected. */
+#define UCM_REG_STORM_LENGTH_MIS 0xe0154
+/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define UCM_REG_STORM_UCM_IFEN 0xe0010
+/* [RW 4] Timers output initial credit. Max credit available - 15.Write
+ writes the initial credit value; read returns the current value of the
+ credit counter. Must be initialized to 4 at start-up. */
+#define UCM_REG_TM_INIT_CRD 0xe021c
+/* [RW 28] The CM header for Timers expiration command. */
+#define UCM_REG_TM_UCM_HDR 0xe009c
+/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define UCM_REG_TM_UCM_IFEN 0xe001c
+/* [RW 1] Input tsem Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define UCM_REG_TSEM_IFEN 0xe0024
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ at the tsem interface is detected. */
+#define UCM_REG_TSEM_LENGTH_MIS 0xe015c
+/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define UCM_REG_TSEM_WEIGHT 0xe00b4
+/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define UCM_REG_UCM_CFC_IFEN 0xe0044
+/* [RW 11] Interrupt mask register #0 read/write */
+#define UCM_REG_UCM_INT_MASK 0xe01d4
+/* [R 11] Interrupt register #0 read */
+#define UCM_REG_UCM_INT_STS 0xe01c8
+/* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS
+ REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
+ Is used to determine the number of the AG context REG-pairs written back;
+ when the Reg1WbFlg isn't set. */
+#define UCM_REG_UCM_REG0_SZ 0xe00dc
+/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
+ disregarded; valid is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define UCM_REG_UCM_STORM0_IFEN 0xe0004
+/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
+ disregarded; valid is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define UCM_REG_UCM_STORM1_IFEN 0xe0008
+/* [RW 1] CM - Timers Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define UCM_REG_UCM_TM_IFEN 0xe0020
+/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
+ disregarded; valid is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define UCM_REG_UCM_UQM_IFEN 0xe000c
+/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
+#define UCM_REG_UCM_UQM_USE_Q 0xe00d8
+/* [RW 6] QM output initial credit. Max credit available - 32.Write writes
+ the initial credit value; read returns the current value of the credit
+ counter. Must be initialized to 32 at start-up. */
+#define UCM_REG_UQM_INIT_CRD 0xe0220
+/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
+ stands for weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define UCM_REG_UQM_P_WEIGHT 0xe00cc
+/* [RW 28] The CM header value for QM request (primary). */
+#define UCM_REG_UQM_UCM_HDR_P 0xe0094
+/* [RW 28] The CM header value for QM request (secondary). */
+#define UCM_REG_UQM_UCM_HDR_S 0xe0098
+/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define UCM_REG_UQM_UCM_IFEN 0xe0014
+/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define UCM_REG_USDM_IFEN 0xe0018
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ at the SDM interface is detected. */
+#define UCM_REG_USDM_LENGTH_MIS 0xe0158
+/* [RW 1] Input xsem Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define UCM_REG_XSEM_IFEN 0xe002c
+/* [RC 1] Set when the message length mismatch (relative to last indication)
+ at the xsem interface isdetected. */
+#define UCM_REG_XSEM_LENGTH_MIS 0xe0164
+/* [RW 20] Indirect access to the descriptor table of the XX protection
+ mechanism. The fields are:[5:0] - message length; 14:6] - message
+ pointer; 19:15] - next pointer. */
+#define UCM_REG_XX_DESCR_TABLE 0xe0280
+/* [R 6] Use to read the XX protection Free counter. */
+#define UCM_REG_XX_FREE 0xe016c
+/* [RW 6] Initial value for the credit counter; responsible for fulfilling
+ of the Input Stage XX protection buffer by the XX protection pending
+ messages. Write writes the initial credit value; read returns the current
+ value of the credit counter. Must be initialized to 12 at start-up. */
+#define UCM_REG_XX_INIT_CRD 0xe0224
+/* [RW 6] The maximum number of pending messages; which may be stored in XX
+ protection. ~ucm_registers_xx_free.xx_free read on read. */
+#define UCM_REG_XX_MSG_NUM 0xe0228
+/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
+#define UCM_REG_XX_OVFL_EVNT_ID 0xe004c
+/* [RW 16] Indirect access to the XX table of the XX protection mechanism.
+ The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] -
+ header pointer. */
+#define UCM_REG_XX_TABLE 0xe0300
+/* [RW 8] The event id for aggregated interrupt 0 */
+#define USDM_REG_AGG_INT_EVENT_0 0xc4038
+#define USDM_REG_AGG_INT_EVENT_1 0xc403c
+#define USDM_REG_AGG_INT_EVENT_10 0xc4060
+#define USDM_REG_AGG_INT_EVENT_11 0xc4064
+#define USDM_REG_AGG_INT_EVENT_12 0xc4068
+#define USDM_REG_AGG_INT_EVENT_13 0xc406c
+#define USDM_REG_AGG_INT_EVENT_14 0xc4070
+#define USDM_REG_AGG_INT_EVENT_15 0xc4074
+#define USDM_REG_AGG_INT_EVENT_16 0xc4078
+#define USDM_REG_AGG_INT_EVENT_17 0xc407c
+#define USDM_REG_AGG_INT_EVENT_18 0xc4080
+#define USDM_REG_AGG_INT_EVENT_19 0xc4084
+/* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
+ or auto-mask-mode (1) */
+#define USDM_REG_AGG_INT_MODE_0 0xc41b8
+#define USDM_REG_AGG_INT_MODE_1 0xc41bc
+#define USDM_REG_AGG_INT_MODE_10 0xc41e0
+#define USDM_REG_AGG_INT_MODE_11 0xc41e4
+#define USDM_REG_AGG_INT_MODE_12 0xc41e8
+#define USDM_REG_AGG_INT_MODE_13 0xc41ec
+#define USDM_REG_AGG_INT_MODE_14 0xc41f0
+#define USDM_REG_AGG_INT_MODE_15 0xc41f4
+#define USDM_REG_AGG_INT_MODE_16 0xc41f8
+#define USDM_REG_AGG_INT_MODE_17 0xc41fc
+#define USDM_REG_AGG_INT_MODE_18 0xc4200
+#define USDM_REG_AGG_INT_MODE_19 0xc4204
+/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
+#define USDM_REG_CFC_RSP_START_ADDR 0xc4008
+/* [RW 16] The maximum value of the competion counter #0 */
+#define USDM_REG_CMP_COUNTER_MAX0 0xc401c
+/* [RW 16] The maximum value of the competion counter #1 */
+#define USDM_REG_CMP_COUNTER_MAX1 0xc4020
+/* [RW 16] The maximum value of the competion counter #2 */
+#define USDM_REG_CMP_COUNTER_MAX2 0xc4024
+/* [RW 16] The maximum value of the competion counter #3 */
+#define USDM_REG_CMP_COUNTER_MAX3 0xc4028
+/* [RW 13] The start address in the internal RAM for the completion
+ counters. */
+#define USDM_REG_CMP_COUNTER_START_ADDR 0xc400c
+#define USDM_REG_ENABLE_IN1 0xc4238
+#define USDM_REG_ENABLE_IN2 0xc423c
+#define USDM_REG_ENABLE_OUT1 0xc4240
+#define USDM_REG_ENABLE_OUT2 0xc4244
+/* [RW 4] The initial number of messages that can be sent to the pxp control
+ interface without receiving any ACK. */
+#define USDM_REG_INIT_CREDIT_PXP_CTRL 0xc44c0
+/* [ST 32] The number of ACK after placement messages received */
+#define USDM_REG_NUM_OF_ACK_AFTER_PLACE 0xc4280
+/* [ST 32] The number of packet end messages received from the parser */
+#define USDM_REG_NUM_OF_PKT_END_MSG 0xc4278
+/* [ST 32] The number of requests received from the pxp async if */
+#define USDM_REG_NUM_OF_PXP_ASYNC_REQ 0xc427c
+/* [ST 32] The number of commands received in queue 0 */
+#define USDM_REG_NUM_OF_Q0_CMD 0xc4248
+/* [ST 32] The number of commands received in queue 10 */
+#define USDM_REG_NUM_OF_Q10_CMD 0xc4270
+/* [ST 32] The number of commands received in queue 11 */
+#define USDM_REG_NUM_OF_Q11_CMD 0xc4274
+/* [ST 32] The number of commands received in queue 1 */
+#define USDM_REG_NUM_OF_Q1_CMD 0xc424c
+/* [ST 32] The number of commands received in queue 2 */
+#define USDM_REG_NUM_OF_Q2_CMD 0xc4250
+/* [ST 32] The number of commands received in queue 3 */
+#define USDM_REG_NUM_OF_Q3_CMD 0xc4254
+/* [ST 32] The number of commands received in queue 4 */
+#define USDM_REG_NUM_OF_Q4_CMD 0xc4258
+/* [ST 32] The number of commands received in queue 5 */
+#define USDM_REG_NUM_OF_Q5_CMD 0xc425c
+/* [ST 32] The number of commands received in queue 6 */
+#define USDM_REG_NUM_OF_Q6_CMD 0xc4260
+/* [ST 32] The number of commands received in queue 7 */
+#define USDM_REG_NUM_OF_Q7_CMD 0xc4264
+/* [ST 32] The number of commands received in queue 8 */
+#define USDM_REG_NUM_OF_Q8_CMD 0xc4268
+/* [ST 32] The number of commands received in queue 9 */
+#define USDM_REG_NUM_OF_Q9_CMD 0xc426c
+/* [RW 13] The start address in the internal RAM for the packet end message */
+#define USDM_REG_PCK_END_MSG_START_ADDR 0xc4014
+/* [RW 13] The start address in the internal RAM for queue counters */
+#define USDM_REG_Q_COUNTER_START_ADDR 0xc4010
+/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
+#define USDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0xc4550
+/* [R 1] parser fifo empty in sdm_sync block */
+#define USDM_REG_SYNC_PARSER_EMPTY 0xc4558
+/* [R 1] parser serial fifo empty in sdm_sync block */
+#define USDM_REG_SYNC_SYNC_EMPTY 0xc4560
+/* [RW 32] Tick for timer counter. Applicable only when
+ ~usdm_registers_timer_tick_enable.timer_tick_enable =1 */
+#define USDM_REG_TIMER_TICK 0xc4000
+/* [RW 32] Interrupt mask register #0 read/write */
+#define USDM_REG_USDM_INT_MASK_0 0xc42a0
+#define USDM_REG_USDM_INT_MASK_1 0xc42b0
+/* [RW 11] Parity mask register #0 read/write */
+#define USDM_REG_USDM_PRTY_MASK 0xc42c0
+/* [RW 5] The number of time_slots in the arbitration cycle */
+#define USEM_REG_ARB_CYCLE_SIZE 0x300034
+/* [RW 3] The source that is associated with arbitration element 0. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2 */
+#define USEM_REG_ARB_ELEMENT0 0x300020
+/* [RW 3] The source that is associated with arbitration element 1. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.
+ Could not be equal to register ~usem_registers_arb_element0.arb_element0 */
+#define USEM_REG_ARB_ELEMENT1 0x300024
+/* [RW 3] The source that is associated with arbitration element 2. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.
+ Could not be equal to register ~usem_registers_arb_element0.arb_element0
+ and ~usem_registers_arb_element1.arb_element1 */
+#define USEM_REG_ARB_ELEMENT2 0x300028
+/* [RW 3] The source that is associated with arbitration element 3. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
+ not be equal to register ~usem_registers_arb_element0.arb_element0 and
+ ~usem_registers_arb_element1.arb_element1 and
+ ~usem_registers_arb_element2.arb_element2 */
+#define USEM_REG_ARB_ELEMENT3 0x30002c
+/* [RW 3] The source that is associated with arbitration element 4. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.
+ Could not be equal to register ~usem_registers_arb_element0.arb_element0
+ and ~usem_registers_arb_element1.arb_element1 and
+ ~usem_registers_arb_element2.arb_element2 and
+ ~usem_registers_arb_element3.arb_element3 */
+#define USEM_REG_ARB_ELEMENT4 0x300030
+#define USEM_REG_ENABLE_IN 0x3000a4
+#define USEM_REG_ENABLE_OUT 0x3000a8
+/* [RW 32] This address space contains all registers and memories that are
+ placed in SEM_FAST block. The SEM_FAST registers are described in
+ appendix B. In order to access the SEM_FAST registers... the base address
+ USEM_REGISTERS_FAST_MEMORY (Offset: 0x320000) should be added to each
+ SEM_FAST register offset. */
+#define USEM_REG_FAST_MEMORY 0x320000
+/* [RW 1] Disables input messages from FIC0 May be updated during run_time
+ by the microcode */
+#define USEM_REG_FIC0_DISABLE 0x300224
+/* [RW 1] Disables input messages from FIC1 May be updated during run_time
+ by the microcode */
+#define USEM_REG_FIC1_DISABLE 0x300234
+/* [RW 15] Interrupt table Read and write access to it is not possible in
+ the middle of the work */
+#define USEM_REG_INT_TABLE 0x300400
+/* [ST 24] Statistics register. The number of messages that entered through
+ FIC0 */
+#define USEM_REG_MSG_NUM_FIC0 0x300000
+/* [ST 24] Statistics register. The number of messages that entered through
+ FIC1 */
+#define USEM_REG_MSG_NUM_FIC1 0x300004
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC0 */
+#define USEM_REG_MSG_NUM_FOC0 0x300008
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC1 */
+#define USEM_REG_MSG_NUM_FOC1 0x30000c
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC2 */
+#define USEM_REG_MSG_NUM_FOC2 0x300010
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC3 */
+#define USEM_REG_MSG_NUM_FOC3 0x300014
+/* [RW 1] Disables input messages from the passive buffer May be updated
+ during run_time by the microcode */
+#define USEM_REG_PAS_DISABLE 0x30024c
+/* [WB 128] Debug only. Passive buffer memory */
+#define USEM_REG_PASSIVE_BUFFER 0x302000
+/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
+#define USEM_REG_PRAM 0x340000
+/* [R 16] Valid sleeping threads indication have bit per thread */
+#define USEM_REG_SLEEP_THREADS_VALID 0x30026c
+/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
+#define USEM_REG_SLOW_EXT_STORE_EMPTY 0x3002a0
+/* [RW 16] List of free threads . There is a bit per thread. */
+#define USEM_REG_THREADS_LIST 0x3002e4
+/* [RW 3] The arbitration scheme of time_slot 0 */
+#define USEM_REG_TS_0_AS 0x300038
+/* [RW 3] The arbitration scheme of time_slot 10 */
+#define USEM_REG_TS_10_AS 0x300060
+/* [RW 3] The arbitration scheme of time_slot 11 */
+#define USEM_REG_TS_11_AS 0x300064
+/* [RW 3] The arbitration scheme of time_slot 12 */
+#define USEM_REG_TS_12_AS 0x300068
+/* [RW 3] The arbitration scheme of time_slot 13 */
+#define USEM_REG_TS_13_AS 0x30006c
+/* [RW 3] The arbitration scheme of time_slot 14 */
+#define USEM_REG_TS_14_AS 0x300070
+/* [RW 3] The arbitration scheme of time_slot 15 */
+#define USEM_REG_TS_15_AS 0x300074
+/* [RW 3] The arbitration scheme of time_slot 16 */
+#define USEM_REG_TS_16_AS 0x300078
+/* [RW 3] The arbitration scheme of time_slot 17 */
+#define USEM_REG_TS_17_AS 0x30007c
+/* [RW 3] The arbitration scheme of time_slot 18 */
+#define USEM_REG_TS_18_AS 0x300080
+/* [RW 3] The arbitration scheme of time_slot 1 */
+#define USEM_REG_TS_1_AS 0x30003c
+/* [RW 3] The arbitration scheme of time_slot 2 */
+#define USEM_REG_TS_2_AS 0x300040
+/* [RW 3] The arbitration scheme of time_slot 3 */
+#define USEM_REG_TS_3_AS 0x300044
+/* [RW 3] The arbitration scheme of time_slot 4 */
+#define USEM_REG_TS_4_AS 0x300048
+/* [RW 3] The arbitration scheme of time_slot 5 */
+#define USEM_REG_TS_5_AS 0x30004c
+/* [RW 3] The arbitration scheme of time_slot 6 */
+#define USEM_REG_TS_6_AS 0x300050
+/* [RW 3] The arbitration scheme of time_slot 7 */
+#define USEM_REG_TS_7_AS 0x300054
+/* [RW 3] The arbitration scheme of time_slot 8 */
+#define USEM_REG_TS_8_AS 0x300058
+/* [RW 3] The arbitration scheme of time_slot 9 */
+#define USEM_REG_TS_9_AS 0x30005c
+/* [RW 32] Interrupt mask register #0 read/write */
+#define USEM_REG_USEM_INT_MASK_0 0x300110
+#define USEM_REG_USEM_INT_MASK_1 0x300120
+/* [RW 32] Parity mask register #0 read/write */
+#define USEM_REG_USEM_PRTY_MASK_0 0x300130
+#define USEM_REG_USEM_PRTY_MASK_1 0x300140
+/* [RW 2] The queue index for registration on Aux1 counter flag. */
+#define XCM_REG_AUX1_Q 0x20134
+/* [RW 2] Per each decision rule the queue index to register to. */
+#define XCM_REG_AUX_CNT_FLG_Q_19 0x201b0
+/* [R 5] Used to read the XX protection CAM occupancy counter. */
+#define XCM_REG_CAM_OCCUP 0x20244
+/* [RW 1] CDU AG read Interface enable. If 0 - the request input is
+ disregarded; valid output is deasserted; all other signals are treated as
+ usual; if 1 - normal activity. */
+#define XCM_REG_CDU_AG_RD_IFEN 0x20044
+/* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
+ are disregarded; all other signals are treated as usual; if 1 - normal
+ activity. */
+#define XCM_REG_CDU_AG_WR_IFEN 0x20040
+/* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
+ disregarded; valid output is deasserted; all other signals are treated as
+ usual; if 1 - normal activity. */
+#define XCM_REG_CDU_SM_RD_IFEN 0x2004c
+/* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
+ input is disregarded; all other signals are treated as usual; if 1 -
+ normal activity. */
+#define XCM_REG_CDU_SM_WR_IFEN 0x20048
+/* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
+ the initial credit value; read returns the current value of the credit
+ counter. Must be initialized to 1 at start-up. */
+#define XCM_REG_CFC_INIT_CRD 0x20404
+/* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define XCM_REG_CP_WEIGHT 0x200dc
+/* [RW 1] Input csem Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define XCM_REG_CSEM_IFEN 0x20028
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ the csem interface. */
+#define XCM_REG_CSEM_LENGTH_MIS 0x20228
+/* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define XCM_REG_CSEM_WEIGHT 0x200c4
+/* [RW 1] Input dorq Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define XCM_REG_DORQ_IFEN 0x20030
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ the dorq interface. */
+#define XCM_REG_DORQ_LENGTH_MIS 0x20230
+/* [RW 8] The Event ID in case the ErrorFlg input message bit is set. */
+#define XCM_REG_ERR_EVNT_ID 0x200b0
+/* [RW 28] The CM erroneous header for QM and Timers formatting. */
+#define XCM_REG_ERR_XCM_HDR 0x200ac
+/* [RW 8] The Event ID for Timers expiration. */
+#define XCM_REG_EXPR_EVNT_ID 0x200b4
+/* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
+ writes the initial credit value; read returns the current value of the
+ credit counter. Must be initialized to 64 at start-up. */
+#define XCM_REG_FIC0_INIT_CRD 0x2040c
+/* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
+ writes the initial credit value; read returns the current value of the
+ credit counter. Must be initialized to 64 at start-up. */
+#define XCM_REG_FIC1_INIT_CRD 0x20410
+/* [RW 8] The maximum delayed ACK counter value.Must be at least 2. Per port
+ value. */
+#define XCM_REG_GLB_DEL_ACK_MAX_CNT_0 0x20118
+#define XCM_REG_GLB_DEL_ACK_MAX_CNT_1 0x2011c
+/* [RW 28] The delayed ACK timeout in ticks. Per port value. */
+#define XCM_REG_GLB_DEL_ACK_TMR_VAL_0 0x20108
+#define XCM_REG_GLB_DEL_ACK_TMR_VAL_1 0x2010c
+/* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin; 1
+ - strict priority defined by ~xcm_registers_gr_ag_pr.gr_ag_pr;
+ ~xcm_registers_gr_ld0_pr.gr_ld0_pr and
+ ~xcm_registers_gr_ld1_pr.gr_ld1_pr. */
+#define XCM_REG_GR_ARB_TYPE 0x2020c
+/* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
+ highest priority is 3. It is supposed that the Channel group is the
+ compliment of the other 3 groups. */
+#define XCM_REG_GR_LD0_PR 0x20214
+/* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
+ highest priority is 3. It is supposed that the Channel group is the
+ compliment of the other 3 groups. */
+#define XCM_REG_GR_LD1_PR 0x20218
+/* [RW 1] Input nig0 Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define XCM_REG_NIG0_IFEN 0x20038
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ the nig0 interface. */
+#define XCM_REG_NIG0_LENGTH_MIS 0x20238
+/* [RW 1] Input nig1 Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define XCM_REG_NIG1_IFEN 0x2003c
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ the nig1 interface. */
+#define XCM_REG_NIG1_LENGTH_MIS 0x2023c
+/* [RW 3] The weight of the input nig1 in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define XCM_REG_NIG1_WEIGHT 0x200d8
+/* [RW 5] The number of double REG-pairs; loaded from the STORM context and
+ sent to STORM; for a specific connection type. The double REG-pairs are
+ used in order to align to STORM context row size of 128 bits. The offset
+ of these data in the STORM context is always 0. Index _i stands for the
+ connection type (one of 16). */
+#define XCM_REG_N_SM_CTX_LD_0 0x20060
+#define XCM_REG_N_SM_CTX_LD_1 0x20064
+#define XCM_REG_N_SM_CTX_LD_10 0x20088
+#define XCM_REG_N_SM_CTX_LD_11 0x2008c
+#define XCM_REG_N_SM_CTX_LD_12 0x20090
+#define XCM_REG_N_SM_CTX_LD_13 0x20094
+#define XCM_REG_N_SM_CTX_LD_14 0x20098
+#define XCM_REG_N_SM_CTX_LD_15 0x2009c
+#define XCM_REG_N_SM_CTX_LD_2 0x20068
+#define XCM_REG_N_SM_CTX_LD_3 0x2006c
+#define XCM_REG_N_SM_CTX_LD_4 0x20070
+/* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define XCM_REG_PBF_IFEN 0x20034
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ the pbf interface. */
+#define XCM_REG_PBF_LENGTH_MIS 0x20234
+/* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define XCM_REG_PBF_WEIGHT 0x200d0
+/* [RW 8] The Event ID for Timers formatting in case of stop done. */
+#define XCM_REG_STOP_EVNT_ID 0x200b8
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ the STORM interface. */
+#define XCM_REG_STORM_LENGTH_MIS 0x2021c
+/* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define XCM_REG_STORM_WEIGHT 0x200bc
+/* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define XCM_REG_STORM_XCM_IFEN 0x20010
+/* [RW 4] Timers output initial credit. Max credit available - 15.Write
+ writes the initial credit value; read returns the current value of the
+ credit counter. Must be initialized to 4 at start-up. */
+#define XCM_REG_TM_INIT_CRD 0x2041c
+/* [RW 28] The CM header for Timers expiration command. */
+#define XCM_REG_TM_XCM_HDR 0x200a8
+/* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define XCM_REG_TM_XCM_IFEN 0x2001c
+/* [RW 1] Input tsem Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define XCM_REG_TSEM_IFEN 0x20024
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ the tsem interface. */
+#define XCM_REG_TSEM_LENGTH_MIS 0x20224
+/* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define XCM_REG_TSEM_WEIGHT 0x200c0
+/* [RW 2] The queue index for registration on UNA greater NXT decision rule. */
+#define XCM_REG_UNA_GT_NXT_Q 0x20120
+/* [RW 1] Input usem Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define XCM_REG_USEM_IFEN 0x2002c
+/* [RC 1] Message length mismatch (relative to last indication) at the usem
+ interface. */
+#define XCM_REG_USEM_LENGTH_MIS 0x2022c
+/* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define XCM_REG_USEM_WEIGHT 0x200c8
+/* [RW 2] DA counter command; used in case of window update doorbell.The
+ first index stands for the value DaEnable of that connection. The second
+ index stands for port number. */
+#define XCM_REG_WU_DA_CNT_CMD00 0x201d4
+/* [RW 2] DA counter command; used in case of window update doorbell.The
+ first index stands for the value DaEnable of that connection. The second
+ index stands for port number. */
+#define XCM_REG_WU_DA_CNT_CMD01 0x201d8
+/* [RW 2] DA counter command; used in case of window update doorbell.The
+ first index stands for the value DaEnable of that connection. The second
+ index stands for port number. */
+#define XCM_REG_WU_DA_CNT_CMD10 0x201dc
+/* [RW 2] DA counter command; used in case of window update doorbell.The
+ first index stands for the value DaEnable of that connection. The second
+ index stands for port number. */
+#define XCM_REG_WU_DA_CNT_CMD11 0x201e0
+/* [RW 8] DA counter update value used in case of window update doorbell.The
+ first index stands for the value DaEnable of that connection. The second
+ index stands for port number. */
+#define XCM_REG_WU_DA_CNT_UPD_VAL00 0x201e4
+/* [RW 8] DA counter update value; used in case of window update
+ doorbell.The first index stands for the value DaEnable of that
+ connection. The second index stands for port number. */
+#define XCM_REG_WU_DA_CNT_UPD_VAL01 0x201e8
+/* [RW 8] DA counter update value; used in case of window update
+ doorbell.The first index stands for the value DaEnable of that
+ connection. The second index stands for port number. */
+#define XCM_REG_WU_DA_CNT_UPD_VAL10 0x201ec
+/* [RW 8] DA counter update value; used in case of window update
+ doorbell.The first index stands for the value DaEnable of that
+ connection. The second index stands for port number. */
+#define XCM_REG_WU_DA_CNT_UPD_VAL11 0x201f0
+/* [RW 1] DA timer command; used in case of window update doorbell.The first
+ index stands for the value DaEnable of that connection. The second index
+ stands for port number. */
+#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00 0x201c4
+/* [RW 1] DA timer command; used in case of window update doorbell.The first
+ index stands for the value DaEnable of that connection. The second index
+ stands for port number. */
+#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01 0x201c8
+/* [RW 1] DA timer command; used in case of window update doorbell.The first
+ index stands for the value DaEnable of that connection. The second index
+ stands for port number. */
+#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10 0x201cc
+/* [RW 1] DA timer command; used in case of window update doorbell.The first
+ index stands for the value DaEnable of that connection. The second index
+ stands for port number. */
+#define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11 0x201d0
+/* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define XCM_REG_XCM_CFC_IFEN 0x20050
+/* [RW 14] Interrupt mask register #0 read/write */
+#define XCM_REG_XCM_INT_MASK 0x202b4
+/* [R 14] Interrupt register #0 read */
+#define XCM_REG_XCM_INT_STS 0x202a8
+/* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS
+ REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
+ Is used to determine the number of the AG context REG-pairs written back;
+ when the Reg1WbFlg isn't set. */
+#define XCM_REG_XCM_REG0_SZ 0x200f4
+/* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
+ disregarded; valid is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define XCM_REG_XCM_STORM0_IFEN 0x20004
+/* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
+ disregarded; valid is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define XCM_REG_XCM_STORM1_IFEN 0x20008
+/* [RW 1] CM - Timers Interface enable. If 0 - the valid input is
+ disregarded; acknowledge output is deasserted; all other signals are
+ treated as usual; if 1 - normal activity. */
+#define XCM_REG_XCM_TM_IFEN 0x20020
+/* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
+ disregarded; valid is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define XCM_REG_XCM_XQM_IFEN 0x2000c
+/* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
+#define XCM_REG_XCM_XQM_USE_Q 0x200f0
+/* [RW 4] The value by which CFC updates the activity counter at QM bypass. */
+#define XCM_REG_XQM_BYP_ACT_UPD 0x200fc
+/* [RW 6] QM output initial credit. Max credit available - 32.Write writes
+ the initial credit value; read returns the current value of the credit
+ counter. Must be initialized to 32 at start-up. */
+#define XCM_REG_XQM_INIT_CRD 0x20420
+/* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
+ stands for weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define XCM_REG_XQM_P_WEIGHT 0x200e4
+/* [RW 28] The CM header value for QM request (primary). */
+#define XCM_REG_XQM_XCM_HDR_P 0x200a0
+/* [RW 28] The CM header value for QM request (secondary). */
+#define XCM_REG_XQM_XCM_HDR_S 0x200a4
+/* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define XCM_REG_XQM_XCM_IFEN 0x20014
+/* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
+ acknowledge output is deasserted; all other signals are treated as usual;
+ if 1 - normal activity. */
+#define XCM_REG_XSDM_IFEN 0x20018
+/* [RC 1] Set at message length mismatch (relative to last indication) at
+ the SDM interface. */
+#define XCM_REG_XSDM_LENGTH_MIS 0x20220
+/* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
+ weight 8 (the most prioritised); 1 stands for weight 1(least
+ prioritised); 2 stands for weight 2; tc. */
+#define XCM_REG_XSDM_WEIGHT 0x200e0
+/* [RW 17] Indirect access to the descriptor table of the XX protection
+ mechanism. The fields are: [5:0] - message length; 11:6] - message
+ pointer; 16:12] - next pointer. */
+#define XCM_REG_XX_DESCR_TABLE 0x20480
+/* [R 6] Used to read the XX protection Free counter. */
+#define XCM_REG_XX_FREE 0x20240
+/* [RW 6] Initial value for the credit counter; responsible for fulfilling
+ of the Input Stage XX protection buffer by the XX protection pending
+ messages. Max credit available - 3.Write writes the initial credit value;
+ read returns the current value of the credit counter. Must be initialized
+ to 2 at start-up. */
+#define XCM_REG_XX_INIT_CRD 0x20424
+/* [RW 6] The maximum number of pending messages; which may be stored in XX
+ protection. ~xcm_registers_xx_free.xx_free read on read. */
+#define XCM_REG_XX_MSG_NUM 0x20428
+/* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
+#define XCM_REG_XX_OVFL_EVNT_ID 0x20058
+/* [RW 15] Indirect access to the XX table of the XX protection mechanism.
+ The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] -
+ header pointer. */
+#define XCM_REG_XX_TABLE 0x20500
+/* [RW 8] The event id for aggregated interrupt 0 */
+#define XSDM_REG_AGG_INT_EVENT_0 0x166038
+#define XSDM_REG_AGG_INT_EVENT_1 0x16603c
+#define XSDM_REG_AGG_INT_EVENT_10 0x166060
+#define XSDM_REG_AGG_INT_EVENT_11 0x166064
+#define XSDM_REG_AGG_INT_EVENT_12 0x166068
+#define XSDM_REG_AGG_INT_EVENT_13 0x16606c
+#define XSDM_REG_AGG_INT_EVENT_14 0x166070
+#define XSDM_REG_AGG_INT_EVENT_15 0x166074
+#define XSDM_REG_AGG_INT_EVENT_16 0x166078
+#define XSDM_REG_AGG_INT_EVENT_17 0x16607c
+#define XSDM_REG_AGG_INT_EVENT_18 0x166080
+#define XSDM_REG_AGG_INT_EVENT_19 0x166084
+#define XSDM_REG_AGG_INT_EVENT_2 0x166040
+#define XSDM_REG_AGG_INT_EVENT_20 0x166088
+#define XSDM_REG_AGG_INT_EVENT_21 0x16608c
+#define XSDM_REG_AGG_INT_EVENT_22 0x166090
+#define XSDM_REG_AGG_INT_EVENT_23 0x166094
+#define XSDM_REG_AGG_INT_EVENT_24 0x166098
+#define XSDM_REG_AGG_INT_EVENT_25 0x16609c
+#define XSDM_REG_AGG_INT_EVENT_26 0x1660a0
+#define XSDM_REG_AGG_INT_EVENT_27 0x1660a4
+#define XSDM_REG_AGG_INT_EVENT_28 0x1660a8
+#define XSDM_REG_AGG_INT_EVENT_29 0x1660ac
+/* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
+ or auto-mask-mode (1) */
+#define XSDM_REG_AGG_INT_MODE_0 0x1661b8
+#define XSDM_REG_AGG_INT_MODE_1 0x1661bc
+#define XSDM_REG_AGG_INT_MODE_10 0x1661e0
+#define XSDM_REG_AGG_INT_MODE_11 0x1661e4
+#define XSDM_REG_AGG_INT_MODE_12 0x1661e8
+#define XSDM_REG_AGG_INT_MODE_13 0x1661ec
+#define XSDM_REG_AGG_INT_MODE_14 0x1661f0
+#define XSDM_REG_AGG_INT_MODE_15 0x1661f4
+#define XSDM_REG_AGG_INT_MODE_16 0x1661f8
+#define XSDM_REG_AGG_INT_MODE_17 0x1661fc
+#define XSDM_REG_AGG_INT_MODE_18 0x166200
+#define XSDM_REG_AGG_INT_MODE_19 0x166204
+/* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
+#define XSDM_REG_CFC_RSP_START_ADDR 0x166008
+/* [RW 16] The maximum value of the competion counter #0 */
+#define XSDM_REG_CMP_COUNTER_MAX0 0x16601c
+/* [RW 16] The maximum value of the competion counter #1 */
+#define XSDM_REG_CMP_COUNTER_MAX1 0x166020
+/* [RW 16] The maximum value of the competion counter #2 */
+#define XSDM_REG_CMP_COUNTER_MAX2 0x166024
+/* [RW 16] The maximum value of the competion counter #3 */
+#define XSDM_REG_CMP_COUNTER_MAX3 0x166028
+/* [RW 13] The start address in the internal RAM for the completion
+ counters. */
+#define XSDM_REG_CMP_COUNTER_START_ADDR 0x16600c
+#define XSDM_REG_ENABLE_IN1 0x166238
+#define XSDM_REG_ENABLE_IN2 0x16623c
+#define XSDM_REG_ENABLE_OUT1 0x166240
+#define XSDM_REG_ENABLE_OUT2 0x166244
+/* [RW 4] The initial number of messages that can be sent to the pxp control
+ interface without receiving any ACK. */
+#define XSDM_REG_INIT_CREDIT_PXP_CTRL 0x1664bc
+/* [ST 32] The number of ACK after placement messages received */
+#define XSDM_REG_NUM_OF_ACK_AFTER_PLACE 0x16627c
+/* [ST 32] The number of packet end messages received from the parser */
+#define XSDM_REG_NUM_OF_PKT_END_MSG 0x166274
+/* [ST 32] The number of requests received from the pxp async if */
+#define XSDM_REG_NUM_OF_PXP_ASYNC_REQ 0x166278
+/* [ST 32] The number of commands received in queue 0 */
+#define XSDM_REG_NUM_OF_Q0_CMD 0x166248
+/* [ST 32] The number of commands received in queue 10 */
+#define XSDM_REG_NUM_OF_Q10_CMD 0x16626c
+/* [ST 32] The number of commands received in queue 11 */
+#define XSDM_REG_NUM_OF_Q11_CMD 0x166270
+/* [ST 32] The number of commands received in queue 1 */
+#define XSDM_REG_NUM_OF_Q1_CMD 0x16624c
+/* [ST 32] The number of commands received in queue 3 */
+#define XSDM_REG_NUM_OF_Q3_CMD 0x166250
+/* [ST 32] The number of commands received in queue 4 */
+#define XSDM_REG_NUM_OF_Q4_CMD 0x166254
+/* [ST 32] The number of commands received in queue 5 */
+#define XSDM_REG_NUM_OF_Q5_CMD 0x166258
+/* [ST 32] The number of commands received in queue 6 */
+#define XSDM_REG_NUM_OF_Q6_CMD 0x16625c
+/* [ST 32] The number of commands received in queue 7 */
+#define XSDM_REG_NUM_OF_Q7_CMD 0x166260
+/* [ST 32] The number of commands received in queue 8 */
+#define XSDM_REG_NUM_OF_Q8_CMD 0x166264
+/* [ST 32] The number of commands received in queue 9 */
+#define XSDM_REG_NUM_OF_Q9_CMD 0x166268
+/* [RW 13] The start address in the internal RAM for queue counters */
+#define XSDM_REG_Q_COUNTER_START_ADDR 0x166010
+/* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
+#define XSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY 0x166548
+/* [R 1] parser fifo empty in sdm_sync block */
+#define XSDM_REG_SYNC_PARSER_EMPTY 0x166550
+/* [R 1] parser serial fifo empty in sdm_sync block */
+#define XSDM_REG_SYNC_SYNC_EMPTY 0x166558
+/* [RW 32] Tick for timer counter. Applicable only when
+ ~xsdm_registers_timer_tick_enable.timer_tick_enable =1 */
+#define XSDM_REG_TIMER_TICK 0x166000
+/* [RW 32] Interrupt mask register #0 read/write */
+#define XSDM_REG_XSDM_INT_MASK_0 0x16629c
+#define XSDM_REG_XSDM_INT_MASK_1 0x1662ac
+/* [RW 11] Parity mask register #0 read/write */
+#define XSDM_REG_XSDM_PRTY_MASK 0x1662bc
+/* [RW 5] The number of time_slots in the arbitration cycle */
+#define XSEM_REG_ARB_CYCLE_SIZE 0x280034
+/* [RW 3] The source that is associated with arbitration element 0. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2 */
+#define XSEM_REG_ARB_ELEMENT0 0x280020
+/* [RW 3] The source that is associated with arbitration element 1. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.
+ Could not be equal to register ~xsem_registers_arb_element0.arb_element0 */
+#define XSEM_REG_ARB_ELEMENT1 0x280024
+/* [RW 3] The source that is associated with arbitration element 2. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.
+ Could not be equal to register ~xsem_registers_arb_element0.arb_element0
+ and ~xsem_registers_arb_element1.arb_element1 */
+#define XSEM_REG_ARB_ELEMENT2 0x280028
+/* [RW 3] The source that is associated with arbitration element 3. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
+ not be equal to register ~xsem_registers_arb_element0.arb_element0 and
+ ~xsem_registers_arb_element1.arb_element1 and
+ ~xsem_registers_arb_element2.arb_element2 */
+#define XSEM_REG_ARB_ELEMENT3 0x28002c
+/* [RW 3] The source that is associated with arbitration element 4. Source
+ decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
+ sleeping thread with priority 1; 4- sleeping thread with priority 2.
+ Could not be equal to register ~xsem_registers_arb_element0.arb_element0
+ and ~xsem_registers_arb_element1.arb_element1 and
+ ~xsem_registers_arb_element2.arb_element2 and
+ ~xsem_registers_arb_element3.arb_element3 */
+#define XSEM_REG_ARB_ELEMENT4 0x280030
+#define XSEM_REG_ENABLE_IN 0x2800a4
+#define XSEM_REG_ENABLE_OUT 0x2800a8
+/* [RW 32] This address space contains all registers and memories that are
+ placed in SEM_FAST block. The SEM_FAST registers are described in
+ appendix B. In order to access the SEM_FAST registers the base address
+ XSEM_REGISTERS_FAST_MEMORY (Offset: 0x2a0000) should be added to each
+ SEM_FAST register offset. */
+#define XSEM_REG_FAST_MEMORY 0x2a0000
+/* [RW 1] Disables input messages from FIC0 May be updated during run_time
+ by the microcode */
+#define XSEM_REG_FIC0_DISABLE 0x280224
+/* [RW 1] Disables input messages from FIC1 May be updated during run_time
+ by the microcode */
+#define XSEM_REG_FIC1_DISABLE 0x280234
+/* [RW 15] Interrupt table Read and write access to it is not possible in
+ the middle of the work */
+#define XSEM_REG_INT_TABLE 0x280400
+/* [ST 24] Statistics register. The number of messages that entered through
+ FIC0 */
+#define XSEM_REG_MSG_NUM_FIC0 0x280000
+/* [ST 24] Statistics register. The number of messages that entered through
+ FIC1 */
+#define XSEM_REG_MSG_NUM_FIC1 0x280004
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC0 */
+#define XSEM_REG_MSG_NUM_FOC0 0x280008
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC1 */
+#define XSEM_REG_MSG_NUM_FOC1 0x28000c
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC2 */
+#define XSEM_REG_MSG_NUM_FOC2 0x280010
+/* [ST 24] Statistics register. The number of messages that were sent to
+ FOC3 */
+#define XSEM_REG_MSG_NUM_FOC3 0x280014
+/* [RW 1] Disables input messages from the passive buffer May be updated
+ during run_time by the microcode */
+#define XSEM_REG_PAS_DISABLE 0x28024c
+/* [WB 128] Debug only. Passive buffer memory */
+#define XSEM_REG_PASSIVE_BUFFER 0x282000
+/* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
+#define XSEM_REG_PRAM 0x2c0000
+/* [R 16] Valid sleeping threads indication have bit per thread */
+#define XSEM_REG_SLEEP_THREADS_VALID 0x28026c
+/* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
+#define XSEM_REG_SLOW_EXT_STORE_EMPTY 0x2802a0
+/* [RW 16] List of free threads . There is a bit per thread. */
+#define XSEM_REG_THREADS_LIST 0x2802e4
+/* [RW 3] The arbitration scheme of time_slot 0 */
+#define XSEM_REG_TS_0_AS 0x280038
+/* [RW 3] The arbitration scheme of time_slot 10 */
+#define XSEM_REG_TS_10_AS 0x280060
+/* [RW 3] The arbitration scheme of time_slot 11 */
+#define XSEM_REG_TS_11_AS 0x280064
+/* [RW 3] The arbitration scheme of time_slot 12 */
+#define XSEM_REG_TS_12_AS 0x280068
+/* [RW 3] The arbitration scheme of time_slot 13 */
+#define XSEM_REG_TS_13_AS 0x28006c
+/* [RW 3] The arbitration scheme of time_slot 14 */
+#define XSEM_REG_TS_14_AS 0x280070
+/* [RW 3] The arbitration scheme of time_slot 15 */
+#define XSEM_REG_TS_15_AS 0x280074
+/* [RW 3] The arbitration scheme of time_slot 16 */
+#define XSEM_REG_TS_16_AS 0x280078
+/* [RW 3] The arbitration scheme of time_slot 17 */
+#define XSEM_REG_TS_17_AS 0x28007c
+/* [RW 3] The arbitration scheme of time_slot 18 */
+#define XSEM_REG_TS_18_AS 0x280080
+/* [RW 3] The arbitration scheme of time_slot 1 */
+#define XSEM_REG_TS_1_AS 0x28003c
+/* [RW 3] The arbitration scheme of time_slot 2 */
+#define XSEM_REG_TS_2_AS 0x280040
+/* [RW 3] The arbitration scheme of time_slot 3 */
+#define XSEM_REG_TS_3_AS 0x280044
+/* [RW 3] The arbitration scheme of time_slot 4 */
+#define XSEM_REG_TS_4_AS 0x280048
+/* [RW 3] The arbitration scheme of time_slot 5 */
+#define XSEM_REG_TS_5_AS 0x28004c
+/* [RW 3] The arbitration scheme of time_slot 6 */
+#define XSEM_REG_TS_6_AS 0x280050
+/* [RW 3] The arbitration scheme of time_slot 7 */
+#define XSEM_REG_TS_7_AS 0x280054
+/* [RW 3] The arbitration scheme of time_slot 8 */
+#define XSEM_REG_TS_8_AS 0x280058
+/* [RW 3] The arbitration scheme of time_slot 9 */
+#define XSEM_REG_TS_9_AS 0x28005c
+/* [RW 32] Interrupt mask register #0 read/write */
+#define XSEM_REG_XSEM_INT_MASK_0 0x280110
+#define XSEM_REG_XSEM_INT_MASK_1 0x280120
+/* [RW 32] Parity mask register #0 read/write */
+#define XSEM_REG_XSEM_PRTY_MASK_0 0x280130
+#define XSEM_REG_XSEM_PRTY_MASK_1 0x280140
+#define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0)
+#define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1)
+#define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0)
+#define MCPR_NVM_CFG4_FLASH_SIZE (0x7L<<0)
+#define MCPR_NVM_COMMAND_DOIT (1L<<4)
+#define MCPR_NVM_COMMAND_DONE (1L<<3)
+#define MCPR_NVM_COMMAND_FIRST (1L<<7)
+#define MCPR_NVM_COMMAND_LAST (1L<<8)
+#define MCPR_NVM_COMMAND_WR (1L<<5)
+#define MCPR_NVM_COMMAND_WREN (1L<<16)
+#define MCPR_NVM_COMMAND_WREN_BITSHIFT 16
+#define MCPR_NVM_COMMAND_WRDI (1L<<17)
+#define MCPR_NVM_COMMAND_WRDI_BITSHIFT 17
+#define MCPR_NVM_SW_ARB_ARB_ARB1 (1L<<9)
+#define MCPR_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5)
+#define MCPR_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1)
+#define BIGMAC_REGISTER_BMAC_CONTROL (0x00<<3)
+#define BIGMAC_REGISTER_BMAC_XGXS_CONTROL (0x01<<3)
+#define BIGMAC_REGISTER_CNT_MAX_SIZE (0x05<<3)
+#define BIGMAC_REGISTER_RX_CONTROL (0x21<<3)
+#define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS (0x46<<3)
+#define BIGMAC_REGISTER_RX_MAX_SIZE (0x23<<3)
+#define BIGMAC_REGISTER_RX_STAT_GR64 (0x26<<3)
+#define BIGMAC_REGISTER_RX_STAT_GRIPJ (0x42<<3)
+#define BIGMAC_REGISTER_TX_CONTROL (0x07<<3)
+#define BIGMAC_REGISTER_TX_MAX_SIZE (0x09<<3)
+#define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD (0x0A<<3)
+#define BIGMAC_REGISTER_TX_SOURCE_ADDR (0x08<<3)
+#define BIGMAC_REGISTER_TX_STAT_GTBYT (0x20<<3)
+#define BIGMAC_REGISTER_TX_STAT_GTPKT (0x0C<<3)
+#define EMAC_MDIO_COMM_COMMAND_ADDRESS (0L<<26)
+#define EMAC_MDIO_COMM_COMMAND_READ_22 (2L<<26)
+#define EMAC_MDIO_COMM_COMMAND_READ_45 (3L<<26)
+#define EMAC_MDIO_COMM_COMMAND_WRITE_22 (1L<<26)
+#define EMAC_MDIO_COMM_COMMAND_WRITE_45 (1L<<26)
+#define EMAC_MDIO_COMM_DATA (0xffffL<<0)
+#define EMAC_MDIO_COMM_START_BUSY (1L<<29)
+#define EMAC_MDIO_MODE_AUTO_POLL (1L<<4)
+#define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31)
+#define EMAC_MODE_25G_MODE (1L<<5)
+#define EMAC_MODE_ACPI_RCVD (1L<<20)
+#define EMAC_MODE_HALF_DUPLEX (1L<<1)
+#define EMAC_MODE_MPKT (1L<<18)
+#define EMAC_MODE_MPKT_RCVD (1L<<19)
+#define EMAC_MODE_PORT_GMII (2L<<2)
+#define EMAC_MODE_PORT_MII (1L<<2)
+#define EMAC_MODE_PORT_MII_10M (3L<<2)
+#define EMAC_MODE_RESET (1L<<0)
+#define EMAC_REG_EMAC_MAC_MATCH 0x10
+#define EMAC_REG_EMAC_MDIO_COMM 0xac
+#define EMAC_REG_EMAC_MDIO_MODE 0xb4
+#define EMAC_REG_EMAC_MODE 0x0
+#define EMAC_REG_EMAC_RX_MODE 0xc8
+#define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c
+#define EMAC_REG_EMAC_RX_STAT_AC 0x180
+#define EMAC_REG_EMAC_RX_STAT_AC_28 0x1f4
+#define EMAC_REG_EMAC_RX_STAT_AC_COUNT 23
+#define EMAC_REG_EMAC_TX_MODE 0xbc
+#define EMAC_REG_EMAC_TX_STAT_AC 0x280
+#define EMAC_REG_EMAC_TX_STAT_AC_COUNT 22
+#define EMAC_RX_MODE_FLOW_EN (1L<<2)
+#define EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10)
+#define EMAC_RX_MODE_PROMISCUOUS (1L<<8)
+#define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31)
+#define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3)
+#define EMAC_TX_MODE_RESET (1L<<0)
+#define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588
+#define MISC_REGISTERS_RESET_REG_1_SET 0x584
+#define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598
+#define MISC_REGISTERS_RESET_REG_2_RST_BMAC0 (0x1<<0)
+#define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE (0x1<<14)
+#define MISC_REGISTERS_RESET_REG_2_SET 0x594
+#define MISC_REGISTERS_RESET_REG_3_CLEAR 0x5a8
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ (0x1<<1)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN (0x1<<2)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1<<3)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW (0x1<<0)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ (0x1<<5)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN (0x1<<6)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD (0x1<<7)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4)
+#define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8)
+#define MISC_REGISTERS_RESET_REG_3_SET 0x5a4
+#define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18)
+#define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31)
+#define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9)
+#define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR (1<<8)
+#define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT (1<<7)
+#define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR (1<<6)
+#define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT (1<<29)
+#define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR (1<<28)
+#define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT (1<<1)
+#define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR (1<<0)
+#define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR (1<<18)
+#define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT (1<<11)
+#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT (1<<13)
+#define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR (1<<12)
+#define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR (1<<12)
+#define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT (1<<15)
+#define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR (1<<14)
+#define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR (1<<20)
+#define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR (1<<0)
+#define AEU_INPUTS_ATTN_BITS_PBF_HW_INTERRUPT (1<<31)
+#define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT (1<<3)
+#define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR (1<<2)
+#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT (1<<5)
+#define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR (1<<4)
+#define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (1<<3)
+#define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (1<<2)
+#define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (1<<22)
+#define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (1<<27)
+#define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (1<<5)
+#define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (1<<25)
+#define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR (1<<24)
+#define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT (1<<29)
+#define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR (1<<28)
+#define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT (1<<23)
+#define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT (1<<27)
+#define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR (1<<26)
+#define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT (1<<21)
+#define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR (1<<20)
+#define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT (1<<25)
+#define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR (1<<24)
+#define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR (1<<16)
+#define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT (1<<9)
+#define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT (1<<7)
+#define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR (1<<6)
+#define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT (1<<11)
+#define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR (1<<10)
+#define RESERVED_GENERAL_ATTENTION_BIT_0 0
+
+#define EVEREST_GEN_ATTN_IN_USE_MASK 0x3e0
+#define EVEREST_LATCHED_ATTN_IN_USE_MASK 0xffe00000
+
+#define RESERVED_GENERAL_ATTENTION_BIT_6 6
+#define RESERVED_GENERAL_ATTENTION_BIT_7 7
+#define RESERVED_GENERAL_ATTENTION_BIT_8 8
+#define RESERVED_GENERAL_ATTENTION_BIT_9 9
+#define RESERVED_GENERAL_ATTENTION_BIT_10 10
+#define RESERVED_GENERAL_ATTENTION_BIT_11 11
+#define RESERVED_GENERAL_ATTENTION_BIT_12 12
+#define RESERVED_GENERAL_ATTENTION_BIT_13 13
+#define RESERVED_GENERAL_ATTENTION_BIT_14 14
+#define RESERVED_GENERAL_ATTENTION_BIT_15 15
+#define RESERVED_GENERAL_ATTENTION_BIT_16 16
+#define RESERVED_GENERAL_ATTENTION_BIT_17 17
+#define RESERVED_GENERAL_ATTENTION_BIT_18 18
+#define RESERVED_GENERAL_ATTENTION_BIT_19 19
+#define RESERVED_GENERAL_ATTENTION_BIT_20 20
+#define RESERVED_GENERAL_ATTENTION_BIT_21 21
+
+/* storm asserts attention bits */
+#define TSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_7
+#define USTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_8
+#define CSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_9
+#define XSTORM_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_10
+
+/* mcp error attention bit */
+#define MCP_FATAL_ASSERT_ATTENTION_BIT RESERVED_GENERAL_ATTENTION_BIT_11
+
+#define LATCHED_ATTN_RBCR 23
+#define LATCHED_ATTN_RBCT 24
+#define LATCHED_ATTN_RBCN 25
+#define LATCHED_ATTN_RBCU 26
+#define LATCHED_ATTN_RBCP 27
+#define LATCHED_ATTN_TIMEOUT_GRC 28
+#define LATCHED_ATTN_RSVD_GRC 29
+#define LATCHED_ATTN_ROM_PARITY_MCP 30
+#define LATCHED_ATTN_UM_RX_PARITY_MCP 31
+#define LATCHED_ATTN_UM_TX_PARITY_MCP 32
+#define LATCHED_ATTN_SCPAD_PARITY_MCP 33
+
+#define GENERAL_ATTEN_WORD(atten_name) ((94 + atten_name) / 32)
+#define GENERAL_ATTEN_OFFSET(atten_name) (1 << ((94 + atten_name) % 32))
+/*
+ * This file defines GRC base address for every block.
+ * This file is included by chipsim, asm microcode and cpp microcode.
+ * These values are used in Design.xml on regBase attribute
+ * Use the base with the generated offsets of specific registers.
+ */
+
+#define GRCBASE_PXPCS 0x000000
+#define GRCBASE_PCICONFIG 0x002000
+#define GRCBASE_PCIREG 0x002400
+#define GRCBASE_EMAC0 0x008000
+#define GRCBASE_EMAC1 0x008400
+#define GRCBASE_DBU 0x008800
+#define GRCBASE_MISC 0x00A000
+#define GRCBASE_DBG 0x00C000
+#define GRCBASE_NIG 0x010000
+#define GRCBASE_XCM 0x020000
+#define GRCBASE_PRS 0x040000
+#define GRCBASE_SRCH 0x040400
+#define GRCBASE_TSDM 0x042000
+#define GRCBASE_TCM 0x050000
+#define GRCBASE_BRB1 0x060000
+#define GRCBASE_MCP 0x080000
+#define GRCBASE_UPB 0x0C1000
+#define GRCBASE_CSDM 0x0C2000
+#define GRCBASE_USDM 0x0C4000
+#define GRCBASE_CCM 0x0D0000
+#define GRCBASE_UCM 0x0E0000
+#define GRCBASE_CDU 0x101000
+#define GRCBASE_DMAE 0x102000
+#define GRCBASE_PXP 0x103000
+#define GRCBASE_CFC 0x104000
+#define GRCBASE_HC 0x108000
+#define GRCBASE_PXP2 0x120000
+#define GRCBASE_PBF 0x140000
+#define GRCBASE_XPB 0x161000
+#define GRCBASE_TIMERS 0x164000
+#define GRCBASE_XSDM 0x166000
+#define GRCBASE_QM 0x168000
+#define GRCBASE_DQ 0x170000
+#define GRCBASE_TSEM 0x180000
+#define GRCBASE_CSEM 0x200000
+#define GRCBASE_XSEM 0x280000
+#define GRCBASE_USEM 0x300000
+#define GRCBASE_MISC_AEU GRCBASE_MISC
+
+
+/*the offset of the configuration space in the pci core register*/
+#define PCICFG_OFFSET 0x2000
+#define PCICFG_VENDOR_ID_OFFSET 0x00
+#define PCICFG_DEVICE_ID_OFFSET 0x02
+#define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET 0x2c
+#define PCICFG_SUBSYSTEM_ID_OFFSET 0x2e
+#define PCICFG_INT_LINE 0x3c
+#define PCICFG_INT_PIN 0x3d
+#define PCICFG_CACHE_LINE_SIZE 0x0c
+#define PCICFG_LATENCY_TIMER 0x0d
+#define PCICFG_REVESION_ID 0x08
+#define PCICFG_BAR_1_LOW 0x10
+#define PCICFG_BAR_1_HIGH 0x14
+#define PCICFG_BAR_2_LOW 0x18
+#define PCICFG_BAR_2_HIGH 0x1c
+#define PCICFG_GRC_ADDRESS 0x78
+#define PCICFG_GRC_DATA 0x80
+#define PCICFG_DEVICE_CONTROL 0xb4
+#define PCICFG_LINK_CONTROL 0xbc
+
+#define BAR_USTRORM_INTMEM 0x400000
+#define BAR_CSTRORM_INTMEM 0x410000
+#define BAR_XSTRORM_INTMEM 0x420000
+#define BAR_TSTRORM_INTMEM 0x430000
+
+#define BAR_IGU_INTMEM 0x440000
+
+#define BAR_DOORBELL_OFFSET 0x800000
+
+#define BAR_ME_REGISTER 0x450000
+
+
+#define GRC_CONFIG_2_SIZE_REG 0x408 /* config_2 offset */
+#define PCI_CONFIG_2_BAR1_SIZE (0xfL<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0)
+#define PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0)
+#define PCI_CONFIG_2_BAR1_64ENA (1L<<4)
+#define PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5)
+#define PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6)
+#define PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7)
+#define PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_2K (1L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_4K (2L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_8K (3L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_16K (4L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_32K (5L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_64K (6L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_128K (7L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_256K (8L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_512K (9L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_1M (10L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_2M (11L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_4M (12L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_8M (13L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_16M (14L<<8)
+#define PCI_CONFIG_2_EXP_ROM_SIZE_32M (15L<<8)
+#define PCI_CONFIG_2_BAR_PREFETCH (1L<<16)
+#define PCI_CONFIG_2_RESERVED0 (0x7fffL<<17)
+
+/* config_3 offset */
+#define GRC_CONFIG_3_SIZE_REG (0x40c)
+#define PCI_CONFIG_3_STICKY_BYTE (0xffL<<0)
+#define PCI_CONFIG_3_FORCE_PME (1L<<24)
+#define PCI_CONFIG_3_PME_STATUS (1L<<25)
+#define PCI_CONFIG_3_PME_ENABLE (1L<<26)
+#define PCI_CONFIG_3_PM_STATE (0x3L<<27)
+#define PCI_CONFIG_3_VAUX_PRESET (1L<<30)
+#define PCI_CONFIG_3_PCI_POWER (1L<<31)
+
+/* config_2 offset */
+#define GRC_CONFIG_2_SIZE_REG 0x408
+
+#define GRC_BAR2_CONFIG 0x4e0
+#define PCI_CONFIG_2_BAR2_SIZE (0xfL<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_DISABLED (0L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_64K (1L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_128K (2L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_256K (3L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_512K (4L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_1M (5L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_2M (6L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_4M (7L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_8M (8L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_16M (9L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_32M (10L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_64M (11L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_128M (12L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_256M (13L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_512M (14L<<0)
+#define PCI_CONFIG_2_BAR2_SIZE_1G (15L<<0)
+#define PCI_CONFIG_2_BAR2_64ENA (1L<<4)
+
+#define PCI_PM_DATA_A (0x410)
+#define PCI_PM_DATA_B (0x414)
+#define PCI_ID_VAL1 (0x434)
+#define PCI_ID_VAL2 (0x438)
+
+#define MDIO_REG_BANK_CL73_IEEEB0 0x0
+#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0
+#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200
+#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN 0x1000
+#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000
+
+#define MDIO_REG_BANK_CL73_IEEEB1 0x10
+#define MDIO_CL73_IEEEB1_AN_ADV2 0x01
+#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000
+#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020
+#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040
+#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080
+
+#define MDIO_REG_BANK_RX0 0x80b0
+#define MDIO_RX0_RX_EQ_BOOST 0x1c
+#define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
+#define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10
+
+#define MDIO_REG_BANK_RX1 0x80c0
+#define MDIO_RX1_RX_EQ_BOOST 0x1c
+#define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
+#define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL 0x10
+
+#define MDIO_REG_BANK_RX2 0x80d0
+#define MDIO_RX2_RX_EQ_BOOST 0x1c
+#define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
+#define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL 0x10
+
+#define MDIO_REG_BANK_RX3 0x80e0
+#define MDIO_RX3_RX_EQ_BOOST 0x1c
+#define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
+#define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL 0x10
+
+#define MDIO_REG_BANK_RX_ALL 0x80f0
+#define MDIO_RX_ALL_RX_EQ_BOOST 0x1c
+#define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7
+#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10
+
+#define MDIO_REG_BANK_TX0 0x8060
+#define MDIO_TX0_TX_DRIVER 0x17
+#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
+#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
+#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
+#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
+#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
+#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
+#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
+#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
+#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
+
+#define MDIO_REG_BANK_XGXS_BLOCK0 0x8000
+#define MDIO_BLOCK0_XGXS_CONTROL 0x10
+
+#define MDIO_REG_BANK_XGXS_BLOCK1 0x8010
+#define MDIO_BLOCK1_LANE_CTRL0 0x15
+#define MDIO_BLOCK1_LANE_CTRL1 0x16
+#define MDIO_BLOCK1_LANE_CTRL2 0x17
+#define MDIO_BLOCK1_LANE_PRBS 0x19
+
+#define MDIO_REG_BANK_XGXS_BLOCK2 0x8100
+#define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10
+#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000
+#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000
+#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11
+#define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000
+#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15
+
+#define MDIO_REG_BANK_GP_STATUS 0x8120
+#define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020
+
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00
+#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00
+
+
+#define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130
+#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11
+#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1
+#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13
+#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1)
+
+#define MDIO_REG_BANK_SERDES_DIGITAL 0x8300
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001
+#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000
+#define MDIO_SERDES_DIGITAL_MISC1 0x18
+#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000
+#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000
+#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000
+#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000
+#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000
+#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008
+#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009
+
+#define MDIO_REG_BANK_OVER_1G 0x8320
+#define MDIO_OVER_1G_DIGCTL_3_4 0x14
+#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0
+#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5
+#define MDIO_OVER_1G_UP1 0x19
+#define MDIO_OVER_1G_UP1_2_5G 0x0001
+#define MDIO_OVER_1G_UP1_5G 0x0002
+#define MDIO_OVER_1G_UP1_6G 0x0004
+#define MDIO_OVER_1G_UP1_10G 0x0010
+#define MDIO_OVER_1G_UP1_10GH 0x0008
+#define MDIO_OVER_1G_UP1_12G 0x0020
+#define MDIO_OVER_1G_UP1_12_5G 0x0040
+#define MDIO_OVER_1G_UP1_13G 0x0080
+#define MDIO_OVER_1G_UP1_15G 0x0100
+#define MDIO_OVER_1G_UP1_16G 0x0200
+#define MDIO_OVER_1G_UP2 0x1A
+#define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007
+#define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038
+#define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0
+#define MDIO_OVER_1G_UP3 0x1B
+#define MDIO_OVER_1G_UP3_HIGIG2 0x0001
+#define MDIO_OVER_1G_LP_UP1 0x1C
+#define MDIO_OVER_1G_LP_UP2 0x1D
+#define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff
+#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780
+#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7
+#define MDIO_OVER_1G_LP_UP3 0x1E
+
+#define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350
+#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10
+#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001
+#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002
+
+#define MDIO_REG_BANK_CL73_USERB0 0x8370
+#define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12
+#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000
+#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000
+#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000
+#define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14
+#define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001
+
+#define MDIO_REG_BANK_AER_BLOCK 0xFFD0
+#define MDIO_AER_BLOCK_AER_REG 0x1E
+
+#define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0
+#define MDIO_COMBO_IEEE0_MII_CONTROL 0x10
+#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040
+#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000
+#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000
+#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040
+#define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100
+#define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200
+#define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000
+#define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000
+#define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000
+#define MDIO_COMBO_IEEE0_MII_STATUS 0x11
+#define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004
+#define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180
+#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE\
+ 0x0000
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH\
+ 0x0180
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020
+#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001
+
+
+#define EXT_PHY_OPT_PMA_PMD_DEVAD 0x1
+#define EXT_PHY_OPT_WIS_DEVAD 0x2
+#define EXT_PHY_OPT_PCS_DEVAD 0x3
+#define EXT_PHY_OPT_PHY_XS_DEVAD 0x4
+#define EXT_PHY_OPT_CNTL 0x0
+#define EXT_PHY_OPT_PMD_RX_SD 0xa
+#define EXT_PHY_OPT_PMD_MISC_CNTL 0xca0a
+#define EXT_PHY_OPT_PHY_IDENTIFIER 0xc800
+#define EXT_PHY_OPT_PMD_DIGITAL_CNT 0xc808
+#define EXT_PHY_OPT_PMD_DIGITAL_SATUS 0xc809
+#define EXT_PHY_OPT_CMU_PLL_BYPASS 0xca09
+#define EXT_PHY_OPT_LASI_CNTL 0x9002
+#define EXT_PHY_OPT_RX_ALARM 0x9003
+#define EXT_PHY_OPT_LASI_STATUS 0x9005
+#define EXT_PHY_OPT_PCS_STATUS 0x0020
+#define EXT_PHY_OPT_XGXS_LANE_STATUS 0x0018
+
+#define EXT_PHY_KR_PMA_PMD_DEVAD 0x1
+#define EXT_PHY_KR_PCS_DEVAD 0x3
+#define EXT_PHY_KR_AUTO_NEG_DEVAD 0x7
+#define EXT_PHY_KR_CTRL 0x0000
+#define EXT_PHY_KR_CTRL2 0x0007
+#define EXT_PHY_KR_PCS_STATUS 0x0020
+#define EXT_PHY_KR_PMD_CTRL 0x0096
+#define EXT_PHY_KR_LASI_CNTL 0x9002
+#define EXT_PHY_KR_LASI_STATUS 0x9005
+#define EXT_PHY_KR_MISC_CTRL1 0xca85
+#define EXT_PHY_KR_GEN_CTRL 0xca10
+#define EXT_PHY_KR_ROM_CODE 0xca19
+