aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/cxgb3/t3_hw.c
diff options
context:
space:
mode:
authorDivy Le Ray <divy@chelsio.com>2007-01-18 22:04:14 -0500
committerJeff Garzik <jeff@garzik.org>2007-02-05 16:58:46 -0500
commit4d22de3e6cc4a09c369b504cd8bcde3385a974cd (patch)
treeaf13a2ee582105d961c79fc4e55fce0b5e043310 /drivers/net/cxgb3/t3_hw.c
parent0bf94faf64afaba6e7b49fd11541b59d2ba06d0e (diff)
Add support for the latest 1G/10G Chelsio adapter, T3.
This driver is required by the Chelsio T3 RDMA driver posted by Steve Wise. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/cxgb3/t3_hw.c')
-rw-r--r--drivers/net/cxgb3/t3_hw.c3354
1 files changed, 3354 insertions, 0 deletions
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
new file mode 100644
index 00000000000..a4e2e57e146
--- /dev/null
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -0,0 +1,3354 @@
+/*
+ * This file is part of the Chelsio T3 Ethernet driver.
+ *
+ * Copyright (C) 2003-2006 Chelsio Communications. All rights reserved.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this
+ * release for licensing terms and conditions.
+ */
+
+#include "common.h"
+#include "regs.h"
+#include "sge_defs.h"
+#include "firmware_exports.h"
+
+ /**
+ * t3_wait_op_done_val - wait until an operation is completed
+ * @adapter: the adapter performing the operation
+ * @reg: the register to check for completion
+ * @mask: a single-bit field within @reg that indicates completion
+ * @polarity: the value of the field when the operation is completed
+ * @attempts: number of check iterations
+ * @delay: delay in usecs between iterations
+ * @valp: where to store the value of the register at completion time
+ *
+ * Wait until an operation is completed by checking a bit in a register
+ * up to @attempts times. If @valp is not NULL the value of the register
+ * at the time it indicated completion is stored there. Returns 0 if the
+ * operation completes and -EAGAIN otherwise.
+ */
+
+int t3_wait_op_done_val(struct adapter *adapter, int reg, u32 mask,
+ int polarity, int attempts, int delay, u32 *valp)
+{
+ while (1) {
+ u32 val = t3_read_reg(adapter, reg);
+
+ if (!!(val & mask) == polarity) {
+ if (valp)
+ *valp = val;
+ return 0;
+ }
+ if (--attempts == 0)
+ return -EAGAIN;
+ if (delay)
+ udelay(delay);
+ }
+}
+
+/**
+ * t3_write_regs - write a bunch of registers
+ * @adapter: the adapter to program
+ * @p: an array of register address/register value pairs
+ * @n: the number of address/value pairs
+ * @offset: register address offset
+ *
+ * Takes an array of register address/register value pairs and writes each
+ * value to the corresponding register. Register addresses are adjusted
+ * by the supplied offset.
+ */
+void t3_write_regs(struct adapter *adapter, const struct addr_val_pair *p,
+ int n, unsigned int offset)
+{
+ while (n--) {
+ t3_write_reg(adapter, p->reg_addr + offset, p->val);
+ p++;
+ }
+}
+
+/**
+ * t3_set_reg_field - set a register field to a value
+ * @adapter: the adapter to program
+ * @addr: the register address
+ * @mask: specifies the portion of the register to modify
+ * @val: the new value for the register field
+ *
+ * Sets a register field specified by the supplied mask to the
+ * given value.
+ */
+void t3_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask,
+ u32 val)
+{
+ u32 v = t3_read_reg(adapter, addr) & ~mask;
+
+ t3_write_reg(adapter, addr, v | val);
+ t3_read_reg(adapter, addr); /* flush */
+}
+
+/**
+ * t3_read_indirect - read indirectly addressed registers
+ * @adap: the adapter
+ * @addr_reg: register holding the indirect address
+ * @data_reg: register holding the value of the indirect register
+ * @vals: where the read register values are stored
+ * @start_idx: index of first indirect register to read
+ * @nregs: how many indirect registers to read
+ *
+ * Reads registers that are accessed indirectly through an address/data
+ * register pair.
+ */
+void t3_read_indirect(struct adapter *adap, unsigned int addr_reg,
+ unsigned int data_reg, u32 *vals, unsigned int nregs,
+ unsigned int start_idx)
+{
+ while (nregs--) {
+ t3_write_reg(adap, addr_reg, start_idx);
+ *vals++ = t3_read_reg(adap, data_reg);
+ start_idx++;
+ }
+}
+
+/**
+ * t3_mc7_bd_read - read from MC7 through backdoor accesses
+ * @mc7: identifies MC7 to read from
+ * @start: index of first 64-bit word to read
+ * @n: number of 64-bit words to read
+ * @buf: where to store the read result
+ *
+ * Read n 64-bit words from MC7 starting at word start, using backdoor
+ * accesses.
+ */
+int t3_mc7_bd_read(struct mc7 *mc7, unsigned int start, unsigned int n,
+ u64 *buf)
+{
+ static const int shift[] = { 0, 0, 16, 24 };
+ static const int step[] = { 0, 32, 16, 8 };
+
+ unsigned int size64 = mc7->size / 8; /* # of 64-bit words */
+ struct adapter *adap = mc7->adapter;
+
+ if (start >= size64 || start + n > size64)
+ return -EINVAL;
+
+ start *= (8 << mc7->width);
+ while (n--) {
+ int i;
+ u64 val64 = 0;
+
+ for (i = (1 << mc7->width) - 1; i >= 0; --i) {
+ int attempts = 10;
+ u32 val;
+
+ t3_write_reg(adap, mc7->offset + A_MC7_BD_ADDR, start);
+ t3_write_reg(adap, mc7->offset + A_MC7_BD_OP, 0);
+ val = t3_read_reg(adap, mc7->offset + A_MC7_BD_OP);
+ while ((val & F_BUSY) && attempts--)
+ val = t3_read_reg(adap,
+ mc7->offset + A_MC7_BD_OP);
+ if (val & F_BUSY)
+ return -EIO;
+
+ val = t3_read_reg(adap, mc7->offset + A_MC7_BD_DATA1);
+ if (mc7->width == 0) {
+ val64 = t3_read_reg(adap,
+ mc7->offset +
+ A_MC7_BD_DATA0);
+ val64 |= (u64) val << 32;
+ } else {
+ if (mc7->width > 1)
+ val >>= shift[mc7->width];
+ val64 |= (u64) val << (step[mc7->width] * i);
+ }
+ start += 8;
+ }
+ *buf++ = val64;
+ }
+ return 0;
+}
+
+/*
+ * Initialize MI1.
+ */
+static void mi1_init(struct adapter *adap, const struct adapter_info *ai)
+{
+ u32 clkdiv = adap->params.vpd.cclk / (2 * adap->params.vpd.mdc) - 1;
+ u32 val = F_PREEN | V_MDIINV(ai->mdiinv) | V_MDIEN(ai->mdien) |
+ V_CLKDIV(clkdiv);
+
+ if (!(ai->caps & SUPPORTED_10000baseT_Full))
+ val |= V_ST(1);
+ t3_write_reg(adap, A_MI1_CFG, val);
+}
+
+#define MDIO_ATTEMPTS 10
+
+/*
+ * MI1 read/write operations for direct-addressed PHYs.
+ */
+static int mi1_read(struct adapter *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int *valp)
+{
+ int ret;
+ u32 addr = V_REGADDR(reg_addr) | V_PHYADDR(phy_addr);
+
+ if (mmd_addr)
+ return -EINVAL;
+
+ mutex_lock(&adapter->mdio_lock);
+ t3_write_reg(adapter, A_MI1_ADDR, addr);
+ t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(2));
+ ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
+ if (!ret)
+ *valp = t3_read_reg(adapter, A_MI1_DATA);
+ mutex_unlock(&adapter->mdio_lock);
+ return ret;
+}
+
+static int mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int val)
+{
+ int ret;
+ u32 addr = V_REGADDR(reg_addr) | V_PHYADDR(phy_addr);
+
+ if (mmd_addr)
+ return -EINVAL;
+
+ mutex_lock(&adapter->mdio_lock);
+ t3_write_reg(adapter, A_MI1_ADDR, addr);
+ t3_write_reg(adapter, A_MI1_DATA, val);
+ t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(1));
+ ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
+ mutex_unlock(&adapter->mdio_lock);
+ return ret;
+}
+
+static const struct mdio_ops mi1_mdio_ops = {
+ mi1_read,
+ mi1_write
+};
+
+/*
+ * MI1 read/write operations for indirect-addressed PHYs.
+ */
+static int mi1_ext_read(struct adapter *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int *valp)
+{
+ int ret;
+ u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr);
+
+ mutex_lock(&adapter->mdio_lock);
+ t3_write_reg(adapter, A_MI1_ADDR, addr);
+ t3_write_reg(adapter, A_MI1_DATA, reg_addr);
+ t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0));
+ ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
+ if (!ret) {
+ t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(3));
+ ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0,
+ MDIO_ATTEMPTS, 20);
+ if (!ret)
+ *valp = t3_read_reg(adapter, A_MI1_DATA);
+ }
+ mutex_unlock(&adapter->mdio_lock);
+ return ret;
+}
+
+static int mi1_ext_write(struct adapter *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int val)
+{
+ int ret;
+ u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr);
+
+ mutex_lock(&adapter->mdio_lock);
+ t3_write_reg(adapter, A_MI1_ADDR, addr);
+ t3_write_reg(adapter, A_MI1_DATA, reg_addr);
+ t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0));
+ ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
+ if (!ret) {
+ t3_write_reg(adapter, A_MI1_DATA, val);
+ t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(1));
+ ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0,
+ MDIO_ATTEMPTS, 20);
+ }
+ mutex_unlock(&adapter->mdio_lock);
+ return ret;
+}
+
+static const struct mdio_ops mi1_mdio_ext_ops = {
+ mi1_ext_read,
+ mi1_ext_write
+};
+
+/**
+ * t3_mdio_change_bits - modify the value of a PHY register
+ * @phy: the PHY to operate on
+ * @mmd: the device address
+ * @reg: the register address
+ * @clear: what part of the register value to mask off
+ * @set: what part of the register value to set
+ *
+ * Changes the value of a PHY register by applying a mask to its current
+ * value and ORing the result with a new value.
+ */
+int t3_mdio_change_bits(struct cphy *phy, int mmd, int reg, unsigned int clear,
+ unsigned int set)
+{
+ int ret;
+ unsigned int val;
+
+ ret = mdio_read(phy, mmd, reg, &val);
+ if (!ret) {
+ val &= ~clear;
+ ret = mdio_write(phy, mmd, reg, val | set);
+ }
+ return ret;
+}
+
+/**
+ * t3_phy_reset - reset a PHY block
+ * @phy: the PHY to operate on
+ * @mmd: the device address of the PHY block to reset
+ * @wait: how long to wait for the reset to complete in 1ms increments
+ *
+ * Resets a PHY block and optionally waits for the reset to complete.
+ * @mmd should be 0 for 10/100/1000 PHYs and the device address to reset
+ * for 10G PHYs.
+ */
+int t3_phy_reset(struct cphy *phy, int mmd, int wait)
+{
+ int err;
+ unsigned int ctl;
+
+ err = t3_mdio_change_bits(phy, mmd, MII_BMCR, BMCR_PDOWN, BMCR_RESET);
+ if (err || !wait)
+ return err;
+
+ do {
+ err = mdio_read(phy, mmd, MII_BMCR, &ctl);
+ if (err)
+ return err;
+ ctl &= BMCR_RESET;
+ if (ctl)
+ msleep(1);
+ } while (ctl && --wait);
+
+ return ctl ? -1 : 0;
+}
+
+/**
+ * t3_phy_advertise - set the PHY advertisement registers for autoneg
+ * @phy: the PHY to operate on
+ * @advert: bitmap of capabilities the PHY should advertise
+ *
+ * Sets a 10/100/1000 PHY's advertisement registers to advertise the
+ * requested capabilities.
+ */
+int t3_phy_advertise(struct cphy *phy, unsigned int advert)
+{
+ int err;
+ unsigned int val = 0;
+
+ err = mdio_read(phy, 0, MII_CTRL1000, &val);
+ if (err)
+ return err;
+
+ val &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
+ if (advert & ADVERTISED_1000baseT_Half)
+ val |= ADVERTISE_1000HALF;
+ if (advert & ADVERTISED_1000baseT_Full)
+ val |= ADVERTISE_1000FULL;
+
+ err = mdio_write(phy, 0, MII_CTRL1000, val);
+ if (err)
+ return err;
+
+ val = 1;
+ if (advert & ADVERTISED_10baseT_Half)
+ val |= ADVERTISE_10HALF;
+ if (advert & ADVERTISED_10baseT_Full)
+ val |= ADVERTISE_10FULL;
+ if (advert & ADVERTISED_100baseT_Half)
+ val |= ADVERTISE_100HALF;
+ if (advert & ADVERTISED_100baseT_Full)
+ val |= ADVERTISE_100FULL;
+ if (advert & ADVERTISED_Pause)
+ val |= ADVERTISE_PAUSE_CAP;
+ if (advert & ADVERTISED_Asym_Pause)
+ val |= ADVERTISE_PAUSE_ASYM;
+ return mdio_write(phy, 0, MII_ADVERTISE, val);
+}
+
+/**
+ * t3_set_phy_speed_duplex - force PHY speed and duplex
+ * @phy: the PHY to operate on
+ * @speed: requested PHY speed
+ * @duplex: requested PHY duplex
+ *
+ * Force a 10/100/1000 PHY's speed and duplex. This also disables
+ * auto-negotiation except for GigE, where auto-negotiation is mandatory.
+ */
+int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex)
+{
+ int err;
+ unsigned int ctl;
+
+ err = mdio_read(phy, 0, MII_BMCR, &ctl);
+ if (err)
+ return err;
+
+ if (speed >= 0) {
+ ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
+ if (speed == SPEED_100)
+ ctl |= BMCR_SPEED100;
+ else if (speed == SPEED_1000)
+ ctl |= BMCR_SPEED1000;
+ }
+ if (duplex >= 0) {
+ ctl &= ~(BMCR_FULLDPLX | BMCR_ANENABLE);
+ if (duplex == DUPLEX_FULL)
+ ctl |= BMCR_FULLDPLX;
+ }
+ if (ctl & BMCR_SPEED1000) /* auto-negotiation required for GigE */
+ ctl |= BMCR_ANENABLE;
+ return mdio_write(phy, 0, MII_BMCR, ctl);
+}
+
+static const struct adapter_info t3_adap_info[] = {
+ {2, 0, 0, 0,
+ F_GPIO2_OEN | F_GPIO4_OEN |
+ F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, F_GPIO3 | F_GPIO5,
+ SUPPORTED_OFFLOAD,
+ &mi1_mdio_ops, "Chelsio PE9000"},
+ {2, 0, 0, 0,
+ F_GPIO2_OEN | F_GPIO4_OEN |
+ F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, F_GPIO3 | F_GPIO5,
+ SUPPORTED_OFFLOAD,
+ &mi1_mdio_ops, "Chelsio T302"},
+ {1, 0, 0, 0,
+ F_GPIO1_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN |
+ F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, 0,
+ SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_OFFLOAD,
+ &mi1_mdio_ext_ops, "Chelsio T310"},
+ {2, 0, 0, 0,
+ F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO5_OEN | F_GPIO6_OEN |
+ F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO11_OEN | F_GPIO1_OUT_VAL |
+ F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, 0,
+ SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_OFFLOAD,
+ &mi1_mdio_ext_ops, "Chelsio T320"},
+};
+
+/*
+ * Return the adapter_info structure with a given index. Out-of-range indices
+ * return NULL.
+ */
+const struct adapter_info *t3_get_adapter_info(unsigned int id)
+{
+ return id < ARRAY_SIZE(t3_adap_info) ? &t3_adap_info[id] : NULL;
+}
+
+#define CAPS_1G (SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full | \
+ SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII)
+#define CAPS_10G (SUPPORTED_10000baseT_Full | SUPPORTED_AUI)
+
+static const struct port_type_info port_types[] = {
+ {NULL},
+ {t3_ael1002_phy_prep, CAPS_10G | SUPPORTED_FIBRE,
+ "10GBASE-XR"},
+ {t3_vsc8211_phy_prep, CAPS_1G | SUPPORTED_TP | SUPPORTED_IRQ,
+ "10/100/1000BASE-T"},
+ {NULL, CAPS_1G | SUPPORTED_TP | SUPPORTED_IRQ,
+ "10/100/1000BASE-T"},
+ {t3_xaui_direct_phy_prep, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"},
+ {NULL, CAPS_10G, "10GBASE-KX4"},
+ {t3_qt2045_phy_prep, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"},
+ {t3_ael1006_phy_prep, CAPS_10G | SUPPORTED_FIBRE,
+ "10GBASE-SR"},
+ {NULL, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"},
+};
+
+#undef CAPS_1G
+#undef CAPS_10G
+
+#define VPD_ENTRY(name, len) \
+ u8 name##_kword[2]; u8 name##_len; u8 name##_data[len]
+
+/*
+ * Partial EEPROM Vital Product Data structure. Includes only the ID and
+ * VPD-R sections.
+ */
+struct t3_vpd {
+ u8 id_tag;
+ u8 id_len[2];
+ u8 id_data[16];
+ u8 vpdr_tag;
+ u8 vpdr_len[2];
+ VPD_ENTRY(pn, 16); /* part number */
+ VPD_ENTRY(ec, 16); /* EC level */
+ VPD_ENTRY(sn, 16); /* serial number */
+ VPD_ENTRY(na, 12); /* MAC address base */
+ VPD_ENTRY(cclk, 6); /* core clock */
+ VPD_ENTRY(mclk, 6); /* mem clock */
+ VPD_ENTRY(uclk, 6); /* uP clk */
+ VPD_ENTRY(mdc, 6); /* MDIO clk */
+ VPD_ENTRY(mt, 2); /* mem timing */
+ VPD_ENTRY(xaui0cfg, 6); /* XAUI0 config */
+ VPD_ENTRY(xaui1cfg, 6); /* XAUI1 config */
+ VPD_ENTRY(port0, 2); /* PHY0 complex */
+ VPD_ENTRY(port1, 2); /* PHY1 complex */
+ VPD_ENTRY(port2, 2); /* PHY2 complex */
+ VPD_ENTRY(port3, 2); /* PHY3 complex */
+ VPD_ENTRY(rv, 1); /* csum */
+ u32 pad; /* for multiple-of-4 sizing and alignment */
+};
+
+#define EEPROM_MAX_POLL 4
+#define EEPROM_STAT_ADDR 0x4000
+#define VPD_BASE 0xc00
+
+/**
+ * t3_seeprom_read - read a VPD EEPROM location
+ * @adapter: adapter to read
+ * @addr: EEPROM address
+ * @data: where to store the read data
+ *
+ * Read a 32-bit word from a location in VPD EEPROM using the card's PCI
+ * VPD ROM capability. A zero is written to the flag bit when the
+ * addres is written to the control register. The hardware device will
+ * set the flag to 1 when 4 bytes have been read into the data register.
+ */
+int t3_seeprom_read(struct adapter *adapter, u32 addr, u32 *data)
+{
+ u16 val;
+ int attempts = EEPROM_MAX_POLL;
+ unsigned int base = adapter->params.pci.vpd_cap_addr;
+
+ if ((addr >= EEPROMSIZE && addr != EEPROM_STAT_ADDR) || (addr & 3))
+ return -EINVAL;
+
+ pci_write_config_word(adapter->pdev, base + PCI_VPD_ADDR, addr);
+ do {
+ udelay(10);
+ pci_read_config_word(adapter->pdev, base + PCI_VPD_ADDR, &val);
+ } while (!(val & PCI_VPD_ADDR_F) && --attempts);
+
+ if (!(val & PCI_VPD_ADDR_F)) {
+ CH_ERR(adapter, "reading EEPROM address 0x%x failed\n", addr);
+ return -EIO;
+ }
+ pci_read_config_dword(adapter->pdev, base + PCI_VPD_DATA, data);
+ *data = le32_to_cpu(*data);
+ return 0;
+}
+
+/**
+ * t3_seeprom_write - write a VPD EEPROM location
+ * @adapter: adapter to write
+ * @addr: EEPROM address
+ * @data: value to write
+ *
+ * Write a 32-bit word to a location in VPD EEPROM using the card's PCI
+ * VPD ROM capability.
+ */
+int t3_seeprom_write(struct adapter *adapter, u32 addr, u32 data)
+{
+ u16 val;
+ int attempts = EEPROM_MAX_POLL;
+ unsigned int base = adapter->params.pci.vpd_cap_addr;
+
+ if ((addr >= EEPROMSIZE && addr != EEPROM_STAT_ADDR) || (addr & 3))
+ return -EINVAL;
+
+ pci_write_config_dword(adapter->pdev, base + PCI_VPD_DATA,
+ cpu_to_le32(data));
+ pci_write_config_word(adapter->pdev,base + PCI_VPD_ADDR,
+ addr | PCI_VPD_ADDR_F);
+ do {
+ msleep(1);
+ pci_read_config_word(adapter->pdev, base + PCI_VPD_ADDR, &val);
+ } while ((val & PCI_VPD_ADDR_F) && --attempts);
+
+ if (val & PCI_VPD_ADDR_F) {
+ CH_ERR(adapter, "write to EEPROM address 0x%x failed\n", addr);
+ return -EIO;
+ }
+ return 0;
+}
+
+/**
+ * t3_seeprom_wp - enable/disable EEPROM write protection
+ * @adapter: the adapter
+ * @enable: 1 to enable write protection, 0 to disable it
+ *
+ * Enables or disables write protection on the serial EEPROM.
+ */
+int t3_seeprom_wp(struct adapter *adapter, int enable)
+{
+ return t3_seeprom_write(adapter, EEPROM_STAT_ADDR, enable ? 0xc : 0);
+}
+
+/*
+ * Convert a character holding a hex digit to a number.
+ */
+static unsigned int hex2int(unsigned char c)
+{
+ return isdigit(c) ? c - '0' : toupper(c) - 'A' + 10;
+}
+
+/**
+ * get_vpd_params - read VPD parameters from VPD EEPROM
+ * @adapter: adapter to read
+ * @p: where to store the parameters
+ *
+ * Reads card parameters stored in VPD EEPROM.
+ */
+static int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
+{
+ int i, addr, ret;
+ struct t3_vpd vpd;
+
+ /*
+ * Card information is normally at VPD_BASE but some early cards had
+ * it at 0.
+ */
+ ret = t3_seeprom_read(adapter, VPD_BASE, (u32 *)&vpd);
+ if (ret)
+ return ret;
+ addr = vpd.id_tag == 0x82 ? VPD_BASE : 0;
+
+ for (i = 0; i < sizeof(vpd); i += 4) {
+ ret = t3_seeprom_read(adapter, addr + i,
+ (u32 *)((u8 *)&vpd + i));
+ if (ret)
+ return ret;
+ }
+
+ p->cclk = simple_strtoul(vpd.cclk_data, NULL, 10);
+ p->mclk = simple_strtoul(vpd.mclk_data, NULL, 10);
+ p->uclk = simple_strtoul(vpd.uclk_data, NULL, 10);
+ p->mdc = simple_strtoul(vpd.mdc_data, NULL, 10);
+ p->mem_timing = simple_strtoul(vpd.mt_data, NULL, 10);
+
+ /* Old eeproms didn't have port information */
+ if (adapter->params.rev == 0 && !vpd.port0_data[0]) {
+ p->port_type[0] = uses_xaui(adapter) ? 1 : 2;
+ p->port_type[1] = uses_xaui(adapter) ? 6 : 2;
+ } else {
+ p->port_type[0] = hex2int(vpd.port0_data[0]);
+ p->port_type[1] = hex2int(vpd.port1_data[0]);
+ p->xauicfg[0] = simple_strtoul(vpd.xaui0cfg_data, NULL, 16);
+ p->xauicfg[1] = simple_strtoul(vpd.xaui1cfg_data, NULL, 16);
+ }
+
+ for (i = 0; i < 6; i++)
+ p->eth_base[i] = hex2int(vpd.na_data[2 * i]) * 16 +
+ hex2int(vpd.na_data[2 * i + 1]);
+ return 0;
+}
+
+/* serial flash and firmware constants */
+enum {
+ SF_ATTEMPTS = 5, /* max retries for SF1 operations */
+ SF_SEC_SIZE = 64 * 1024, /* serial flash sector size */
+ SF_SIZE = SF_SEC_SIZE * 8, /* serial flash size */
+
+ /* flash command opcodes */
+ SF_PROG_PAGE = 2, /* program page */
+ SF_WR_DISABLE = 4, /* disable writes */
+ SF_RD_STATUS = 5, /* read status register */
+ SF_WR_ENABLE = 6, /* enable writes */
+ SF_RD_DATA_FAST = 0xb, /* read flash */
+ SF_ERASE_SECTOR = 0xd8, /* erase sector */
+
+ FW_FLASH_BOOT_ADDR = 0x70000, /* start address of FW in flash */
+ FW_VERS_ADDR = 0x77ffc /* flash address holding FW version */
+};
+
+/**
+ * sf1_read - read data from the serial flash
+ * @adapter: the adapter
+ * @byte_cnt: number of bytes to read
+ * @cont: whether another operation will be chained
+ * @valp: where to store the read data
+ *
+ * Reads up to 4 bytes of data from the serial flash. The location of
+ * the read needs to be specified prior to calling this by issuing the
+ * appropriate commands to the serial flash.
+ */
+static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont,
+ u32 *valp)
+{
+ int ret;
+
+ if (!byte_cnt || byte_cnt > 4)
+ return -EINVAL;
+ if (t3_read_reg(adapter, A_SF_OP) & F_BUSY)
+ return -EBUSY;
+ t3_write_reg(adapter, A_SF_OP, V_CONT(cont) | V_BYTECNT(byte_cnt - 1));
+ ret = t3_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 10);
+ if (!ret)
+ *valp = t3_read_reg(adapter, A_SF_DATA);
+ return ret;
+}
+
+/**
+ * sf1_write - write data to the serial flash
+ * @adapter: the adapter
+ * @byte_cnt: number of bytes to write
+ * @cont: whether another operation will be chained
+ * @val: value to write
+ *
+ * Writes up to 4 bytes of data to the serial flash. The location of
+ * the write needs to be specified prior to calling this by issuing the
+ * appropriate commands to the serial flash.
+ */
+static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont,
+ u32 val)
+{
+ if (!byte_cnt || byte_cnt > 4)
+ return -EINVAL;
+ if (t3_read_reg(adapter, A_SF_OP) & F_BUSY)
+ return -EBUSY;
+ t3_write_reg(adapter, A_SF_DATA, val);
+ t3_write_reg(adapter, A_SF_OP,
+ V_CONT(cont) | V_BYTECNT(byte_cnt - 1) | V_OP(1));
+ return t3_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 10);
+}
+
+/**
+ * flash_wait_op - wait for a flash operation to complete
+ * @adapter: the adapter
+ * @attempts: max number of polls of the status register
+ * @delay: delay between polls in ms
+ *
+ * Wait for a flash operation to complete by polling the status register.
+ */
+static int flash_wait_op(struct adapter *adapter, int attempts, int delay)
+{
+ int ret;
+ u32 status;
+
+ while (1) {
+ if ((ret = sf1_write(adapter, 1, 1, SF_RD_STATUS)) != 0 ||
+ (ret = sf1_read(adapter, 1, 0, &status)) != 0)
+ return ret;
+ if (!(status & 1))
+ return 0;
+ if (--attempts == 0)
+ return -EAGAIN;
+ if (delay)
+ msleep(delay);
+ }
+}
+
+/**
+ * t3_read_flash - read words from serial flash
+ * @adapter: the adapter
+ * @addr: the start address for the read
+ * @nwords: how many 32-bit words to read
+ * @data: where to store the read data
+ * @byte_oriented: whether to store data as bytes or as words
+ *
+ * Read the specified number of 32-bit words from the serial flash.
+ * If @byte_oriented is set the read data is stored as a byte array
+ * (i.e., big-endian), otherwise as 32-bit words in the platform's
+ * natural endianess.
+ */
+int t3_read_flash(struct adapter *adapter, unsigned int addr,
+ unsigned int nwords, u32 *data, int byte_oriented)
+{
+ int ret;
+
+ if (addr + nwords * sizeof(u32) > SF_SIZE || (addr & 3))
+ return -EINVAL;
+
+ addr = swab32(addr) | SF_RD_DATA_FAST;
+
+ if ((ret = sf1_write(adapter, 4, 1, addr)) != 0 ||
+ (ret = sf1_read(adapter, 1, 1, data)) != 0)
+ return ret;
+
+ for (; nwords; nwords--, data++) {
+ ret = sf1_read(adapter, 4, nwords > 1, data);
+ if (ret)
+ return ret;
+ if (byte_oriented)
+ *data = htonl(*data);
+ }
+ return 0;
+}
+
+/**
+ * t3_write_flash - write up to a page of data to the serial flash
+ * @adapter: the adapter
+ * @addr: the start address to write
+ * @n: length of data to write
+ * @data: the data to write
+ *
+ * Writes up to a page of data (256 bytes) to the serial flash starting
+ * at the given address.
+ */
+static int t3_write_flash(struct adapter *adapter, unsigned int addr,
+ unsigned int n, const u8 *data)
+{
+ int ret;
+ u32 buf[64];
+ unsigned int i, c, left, val, offset = addr & 0xff;
+
+ if (addr + n > SF_SIZE || offset + n > 256)
+ return -EINVAL;
+
+ val = swab32(addr) | SF_PROG_PAGE;
+
+ if ((ret = sf1_write(adapter, 1, 0, SF_WR_ENABLE)) != 0 ||
+ (ret = sf1_write(adapter, 4, 1, val)) != 0)
+ return ret;
+
+ for (left = n; left; left -= c) {
+ c = min(left, 4U);
+ for (val = 0, i = 0; i < c; ++i)
+ val = (val << 8) + *data++;
+
+ ret = sf1_write(adapter, c, c != left, val);
+ if (ret)
+ return ret;
+ }
+ if ((ret = flash_wait_op(adapter, 5, 1)) != 0)
+ return ret;
+
+ /* Read the page to verify the write succeeded */
+ ret = t3_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf, 1);
+ if (ret)
+ return ret;
+
+ if (memcmp(data - n, (u8 *) buf + offset, n))
+ return -EIO;
+ return 0;
+}
+
+/**
+ * t3_get_fw_version - read the firmware version
+ * @adapter: the adapter
+ * @vers: where to place the version
+ *
+ * Reads the FW version from flash.
+ */
+int t3_get_fw_version(struct adapter *adapter, u32 *vers)
+{
+ return t3_read_flash(adapter, FW_VERS_ADDR, 1, vers, 0);
+}
+
+/**
+ * t3_check_fw_version - check if the FW is compatible with this driver
+ * @adapter: the adapter
+ *
+ * Checks if an adapter's FW is compatible with the driver. Returns 0
+ * if the versions are compatible, a negative error otherwise.
+ */
+int t3_check_fw_version(struct adapter *adapter)
+{
+ int ret;
+ u32 vers;
+
+ ret = t3_get_fw_version(adapter, &vers);
+ if (ret)
+ return ret;
+
+ /* Minor 0xfff means the FW is an internal development-only version. */
+ if ((vers & 0xfff) == 0xfff)
+ return 0;
+
+ if (vers == 0x1002009)
+ return 0;
+
+ CH_ERR(adapter, "found wrong FW version, driver needs version 2.9\n");
+ return -EINVAL;
+}
+
+/**
+ * t3_flash_erase_sectors - erase a range of flash sectors
+ * @adapter: the adapter
+ * @start: the first sector to erase
+ * @end: the last sector to erase
+ *
+ * Erases the sectors in the given range.
+ */
+static int t3_flash_erase_sectors(struct adapter *adapter, int start, int end)
+{
+ while (start <= end) {
+ int ret;
+
+ if ((ret = sf1_write(adapter, 1, 0, SF_WR_ENABLE)) != 0 ||
+ (ret = sf1_write(adapter, 4, 0,
+ SF_ERASE_SECTOR | (start << 8))) != 0 ||
+ (ret = flash_wait_op(adapter, 5, 500)) != 0)
+ return ret;
+ start++;
+ }
+ return 0;
+}
+
+/*
+ * t3_load_fw - download firmware
+ * @adapter: the adapter
+ * @fw_data: the firrware image to write
+ * @size: image size
+ *
+ * Write the supplied firmware image to the card's serial flash.
+ * The FW image has the following sections: @size - 8 bytes of code and
+ * data, followed by 4 bytes of FW version, followed by the 32-bit
+ * 1's complement checksum of the whole image.
+ */
+int t3_load_fw(struct adapter *adapter, const u8 *fw_data, unsigned int size)
+{
+ u32 csum;
+ unsigned int i;
+ const u32 *p = (const u32 *)fw_data;
+ int ret, addr, fw_sector = FW_FLASH_BOOT_ADDR >> 16;
+
+ if (size & 3)
+ return -EINVAL;
+ if (size > FW_VERS_ADDR + 8 - FW_FLASH_BOOT_ADDR)
+ return -EFBIG;
+
+ for (csum = 0, i = 0; i < size / sizeof(csum); i++)
+ csum += ntohl(p[i]);
+ if (csum != 0xffffffff) {
+ CH_ERR(adapter, "corrupted firmware image, checksum %u\n",
+ csum);
+ return -EINVAL;
+ }
+
+ ret = t3_flash_erase_sectors(adapter, fw_sector, fw_sector);
+ if (ret)
+ goto out;
+
+ size -= 8; /* trim off version and checksum */
+ for (addr = FW_FLASH_BOOT_ADDR; size;) {
+ unsigned int chunk_size = min(size, 256U);
+
+ ret = t3_write_flash(adapter, addr, chunk_size, fw_data);
+ if (ret)
+ goto out;
+
+ addr += chunk_size;
+ fw_data += chunk_size;
+ size -= chunk_size;
+ }
+
+ ret = t3_write_flash(adapter, FW_VERS_ADDR, 4, fw_data);
+out:
+ if (ret)
+ CH_ERR(adapter, "firmware download failed, error %d\n", ret);
+ return ret;
+}
+
+#define CIM_CTL_BASE 0x2000
+
+/**
+ * t3_cim_ctl_blk_read - read a block from CIM control region
+ *
+ * @adap: the adapter
+ * @addr: the start address within the CIM control region
+ * @n: number of words to read
+ * @valp: where to store the result
+ *
+ * Reads a block of 4-byte words from the CIM control region.
+ */
+int t3_cim_ctl_blk_read(struct adapter *adap, unsigned int addr,
+ unsigned int n, unsigned int *valp)
+{
+ int ret = 0;
+
+ if (t3_read_reg(adap, A_CIM_HOST_ACC_CTRL) & F_HOSTBUSY)
+ return -EBUSY;
+
+ for ( ; !ret && n--; addr += 4) {
+ t3_write_reg(adap, A_CIM_HOST_ACC_CTRL, CIM_CTL_BASE + addr);
+ ret = t3_wait_op_done(adap, A_CIM_HOST_ACC_CTRL, F_HOSTBUSY,
+ 0, 5, 2);
+ if (!ret)
+ *valp++ = t3_read_reg(adap, A_CIM_HOST_ACC_DATA);
+ }
+ return ret;
+}
+
+
+/**
+ * t3_link_changed - handle interface link changes
+ * @adapter: the adapter
+ * @port_id: the port index that changed link state
+ *
+ * Called when a port's link settings change to propagate the new values
+ * to the associated PHY and MAC. After performing the common tasks it
+ * invokes an OS-specific handler.
+ */
+void t3_link_changed(struct adapter *adapter, int port_id)
+{
+ int link_ok, speed, duplex, fc;
+ struct port_info *pi = adap2pinfo(adapter, port_id);
+ struct cphy *phy = &pi->phy;
+ struct cmac *mac = &pi->mac;
+ struct link_config *lc = &pi->link_config;
+
+ phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
+
+ if (link_ok != lc->link_ok && adapter->params.rev > 0 &&
+ uses_xaui(adapter)) {
+ if (link_ok)
+ t3b_pcs_reset(mac);
+ t3_write_reg(adapter, A_XGM_XAUI_ACT_CTRL + mac->offset,
+ link_ok ? F_TXACTENABLE | F_RXEN : 0);
+ }
+ lc->link_ok = link_ok;
+ lc->speed = speed < 0 ? SPEED_INVALID : speed;
+ lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex;
+ if (lc->requested_fc & PAUSE_AUTONEG)
+ fc &= lc->requested_fc;
+ else
+ fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+
+ if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) {
+ /* Set MAC speed, duplex, and flow control to match PHY. */
+ t3_mac_set_speed_duplex_fc(mac, speed, duplex, fc);
+ lc->fc = fc;
+ }
+
+ t3_os_link_changed(adapter, port_id, link_ok, speed, duplex, fc);
+}
+
+/**
+ * t3_link_start - apply link configuration to MAC/PHY
+ * @phy: the PHY to setup
+ * @mac: the MAC to setup
+ * @lc: the requested link configuration
+ *
+ * Set up a port's MAC and PHY according to a desired link configuration.
+ * - If the PHY can auto-negotiate first decide what to advertise, then
+ * enable/disable auto-negotiation as desired, and reset.
+ * - If the PHY does not auto-negotiate just reset it.
+ * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
+ * otherwise do it later based on the outcome of auto-negotiation.
+ */
+int t3_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc)
+{
+ unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+
+ lc->link_ok = 0;
+ if (lc->supported & SUPPORTED_Autoneg) {
+ lc->advertising &= ~(ADVERTISED_Asym_Pause | ADVERTISED_Pause);
+ if (fc) {
+ lc->advertising |= ADVERTISED_Asym_Pause;
+ if (fc & PAUSE_RX)
+ lc->advertising |= ADVERTISED_Pause;
+ }
+ phy->ops->advertise(phy, lc->advertising);
+
+ if (lc->autoneg == AUTONEG_DISABLE) {
+ lc->speed = lc->requested_speed;
+ lc->duplex = lc->requested_duplex;
+ lc->fc = (unsigned char)fc;
+ t3_mac_set_speed_duplex_fc(mac, lc->speed, lc->duplex,
+ fc);
+ /* Also disables autoneg */
+ phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex);
+ phy->ops->reset(phy, 0);
+ } else
+ phy->ops->autoneg_enable(phy);
+ } else {
+ t3_mac_set_speed_duplex_fc(mac, -1, -1, fc);
+ lc->fc = (unsigned char)fc;
+ phy->ops->reset(phy, 0);
+ }
+ return 0;
+}
+
+/**
+ * t3_set_vlan_accel - control HW VLAN extraction
+ * @adapter: the adapter
+ * @ports: bitmap of adapter ports to operate on
+ * @on: enable (1) or disable (0) HW VLAN extraction
+ *
+ * Enables or disables HW extraction of VLAN tags for the given port.
+ */
+void t3_set_vlan_accel(struct adapter *adapter, unsigned int ports, int on)
+{
+ t3_set_reg_field(adapter, A_TP_OUT_CONFIG,
+ ports << S_VLANEXTRACTIONENABLE,
+ on ? (ports << S_VLANEXTRACTIONENABLE) : 0);
+}
+
+struct intr_info {
+ unsigned int mask; /* bits to check in interrupt status */
+ const char *msg; /* message to print or NULL */
+ short stat_idx; /* stat counter to increment or -1 */
+ unsigned short fatal:1; /* whether the condition reported is fatal */
+};
+
+/**
+ * t3_handle_intr_status - table driven interrupt handler
+ * @adapter: the adapter that generated the interrupt
+ * @reg: the interrupt status register to process
+ * @mask: a mask to apply to the interrupt status
+ * @acts: table of interrupt actions
+ * @stats: statistics counters tracking interrupt occurences
+ *
+ * A table driven interrupt handler that applies a set of masks to an
+ * interrupt status word and performs the corresponding actions if the
+ * interrupts described by the mask have occured. The actions include
+ * optionally printing a warning or alert message, and optionally
+ * incrementing a stat counter. The table is terminated by an entry
+ * specifying mask 0. Returns the number of fatal interrupt conditions.
+ */
+static int t3_handle_intr_status(struct adapter *adapter, unsigned int reg,
+ unsigned int mask,
+ const struct intr_info *acts,
+ unsigned long *stats)
+{
+ int fatal = 0;
+ unsigned int status = t3_read_reg(adapter, reg) & mask;
+
+ for (; acts->mask; ++acts) {
+ if (!(status & acts->mask))
+ continue;
+ if (acts->fatal) {
+ fatal++;
+ CH_ALERT(adapter, "%s (0x%x)\n",
+ acts->msg, status & acts->mask);
+ } else if (acts->msg)
+ CH_WARN(adapter, "%s (0x%x)\n",
+ acts->msg, status & acts->mask);
+ if (acts->stat_idx >= 0)
+ stats[acts->stat_idx]++;
+ }
+ if (status) /* clear processed interrupts */
+ t3_write_reg(adapter, reg, status);
+ return fatal;
+}
+
+#define SGE_INTR_MASK (F_RSPQDISABLED)
+#define MC5_INTR_MASK (F_PARITYERR | F_ACTRGNFULL | F_UNKNOWNCMD | \
+ F_REQQPARERR | F_DISPQPARERR | F_DELACTEMPTY | \
+ F_NFASRCHFAIL)
+#define MC7_INTR_MASK (F_AE | F_UE | F_CE | V_PE(M_PE))
+#define XGM_INTR_MASK (V_TXFIFO_PRTY_ERR(M_TXFIFO_PRTY_ERR) | \
+ V_RXFIFO_PRTY_ERR(M_RXFIFO_PRTY_ERR) | \
+ F_TXFIFO_UNDERRUN | F_RXFIFO_OVERFLOW)
+#define PCIX_INTR_MASK (F_MSTDETPARERR | F_SIGTARABT | F_RCVTARABT | \
+ F_RCVMSTABT | F_SIGSYSERR | F_DETPARERR | \
+ F_SPLCMPDIS | F_UNXSPLCMP | F_RCVSPLCMPERR | \
+ F_DETCORECCERR | F_DETUNCECCERR | F_PIOPARERR | \
+ V_WFPARERR(M_WFPARERR) | V_RFPARERR(M_RFPARERR) | \
+ V_CFPARERR(M_CFPARERR) /* | V_MSIXPARERR(M_MSIXPARERR) */)
+#define PCIE_INTR_MASK (F_UNXSPLCPLERRR | F_UNXSPLCPLERRC | F_PCIE_PIOPARERR |\
+ F_PCIE_WFPARERR | F_PCIE_RFPARERR | F_PCIE_CFPARERR | \
+ /* V_PCIE_MSIXPARERR(M_PCIE_MSIXPARERR) | */ \
+ V_BISTERR(M_BISTERR) | F_PEXERR)
+#define ULPRX_INTR_MASK F_PARERR
+#define ULPTX_INTR_MASK 0
+#define CPLSW_INTR_MASK (F_TP_FRAMING_ERROR | \
+ F_SGE_FRAMING_ERROR | F_CIM_FRAMING_ERROR | \
+ F_ZERO_SWITCH_ERROR)
+#define CIM_INTR_MASK (F_BLKWRPLINT | F_BLKRDPLINT | F_BLKWRCTLINT | \
+ F_BLKRDCTLINT | F_BLKWRFLASHINT | F_BLKRDFLASHINT | \
+ F_SGLWRFLASHINT | F_WRBLKFLASHINT | F_BLKWRBOOTINT | \
+ F_FLASHRANGEINT | F_SDRAMRANGEINT | F_RSVDSPACEINT)
+#define PMTX_INTR_MASK (F_ZERO_C_CMD_ERROR | ICSPI_FRM_ERR | OESPI_FRM_ERR | \
+ V_ICSPI_PAR_ERROR(M_ICSPI_PAR_ERROR) | \
+ V_OESPI_PAR_ERROR(M_OESPI_PAR_ERROR))
+#define PMRX_INTR_MASK (F_ZERO_E_CMD_ERROR | IESPI_FRM_ERR | OCSPI_FRM_ERR | \
+ V_IESPI_PAR_ERROR(M_IESPI_PAR_ERROR) | \
+ V_OCSPI_PAR_ERROR(M_OCSPI_PAR_ERROR))
+#define MPS_INTR_MASK (V_TX0TPPARERRENB(M_TX0TPPARERRENB) | \
+ V_TX1TPPARERRENB(M_TX1TPPARERRENB) | \
+ V_RXTPPARERRENB(M_RXTPPARERRENB) | \
+ V_MCAPARERRENB(M_MCAPARERRENB))
+#define PL_INTR_MASK (F_T3DBG | F_XGMAC0_0 | F_XGMAC0_1 | F_MC5A | F_PM1_TX | \
+ F_PM1_RX | F_ULP2_TX | F_ULP2_RX | F_TP1 | F_CIM | \
+ F_MC7_CM | F_MC7_PMTX | F_MC7_PMRX | F_SGE3 | F_PCIM0 | \
+ F_MPS0 | F_CPL_SWITCH)
+
+/*
+ * Interrupt handler for the PCIX1 module.
+ */
+static void pci_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info pcix1_intr_info[] = {
+ { F_PEXERR, "PCI PEX error", -1, 1 },
+ {F_MSTDETPARERR, "PCI master detected parity error", -1, 1},
+ {F_SIGTARABT, "PCI signaled target abort", -1, 1},
+ {F_RCVTARABT, "PCI received target abort", -1, 1},
+ {F_RCVMSTABT, "PCI received master abort", -1, 1},
+ {F_SIGSYSERR, "PCI signaled system error", -1, 1},
+ {F_DETPARERR, "PCI detected parity error", -1, 1},
+ {F_SPLCMPDIS, "PCI split completion discarded", -1, 1},
+ {F_UNXSPLCMP, "PCI unexpected split completion error", -1, 1},
+ {F_RCVSPLCMPERR, "PCI received split completion error", -1,
+ 1},
+ {F_DETCORECCERR, "PCI correctable ECC error",
+ STAT_PCI_CORR_ECC, 0},
+ {F_DETUNCECCERR, "PCI uncorrectable ECC error", -1, 1},
+ {F_PIOPARERR, "PCI PIO FIFO parity error", -1, 1},
+ {V_WFPARERR(M_WFPARERR), "PCI write FIFO parity error", -1,
+ 1},
+ {V_RFPARERR(M_RFPARERR), "PCI read FIFO parity error", -1,
+ 1},
+ {V_CFPARERR(M_CFPARERR), "PCI command FIFO parity error", -1,
+ 1},
+ {V_MSIXPARERR(M_MSIXPARERR), "PCI MSI-X table/PBA parity "
+ "error", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_PCIX_INT_CAUSE, PCIX_INTR_MASK,
+ pcix1_intr_info, adapter->irq_stats))
+ t3_fatal_err(adapter);
+}
+
+/*
+ * Interrupt handler for the PCIE module.
+ */
+static void pcie_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info pcie_intr_info[] = {
+ {F_UNXSPLCPLERRR,
+ "PCI unexpected split completion DMA read error", -1, 1},
+ {F_UNXSPLCPLERRC,
+ "PCI unexpected split completion DMA command error", -1, 1},
+ {F_PCIE_PIOPARERR, "PCI PIO FIFO parity error", -1, 1},
+ {F_PCIE_WFPARERR, "PCI write FIFO parity error", -1, 1},
+ {F_PCIE_RFPARERR, "PCI read FIFO parity error", -1, 1},
+ {F_PCIE_CFPARERR, "PCI command FIFO parity error", -1, 1},
+ {V_PCIE_MSIXPARERR(M_PCIE_MSIXPARERR),
+ "PCI MSI-X table/PBA parity error", -1, 1},
+ {V_BISTERR(M_BISTERR), "PCI BIST error", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_PCIE_INT_CAUSE, PCIE_INTR_MASK,
+ pcie_intr_info, adapter->irq_stats))
+ t3_fatal_err(adapter);
+}
+
+/*
+ * TP interrupt handler.
+ */
+static void tp_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info tp_intr_info[] = {
+ {0xffffff, "TP parity error", -1, 1},
+ {0x1000000, "TP out of Rx pages", -1, 1},
+ {0x2000000, "TP out of Tx pages", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_TP_INT_CAUSE, 0xffffffff,
+ tp_intr_info, NULL))
+ t3_fatal_err(adapter);
+}
+
+/*
+ * CIM interrupt handler.
+ */
+static void cim_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info cim_intr_info[] = {
+ {F_RSVDSPACEINT, "CIM reserved space write", -1, 1},
+ {F_SDRAMRANGEINT, "CIM SDRAM address out of range", -1, 1},
+ {F_FLASHRANGEINT, "CIM flash address out of range", -1, 1},
+ {F_BLKWRBOOTINT, "CIM block write to boot space", -1, 1},
+ {F_WRBLKFLASHINT, "CIM write to cached flash space", -1, 1},
+ {F_SGLWRFLASHINT, "CIM single write to flash space", -1, 1},
+ {F_BLKRDFLASHINT, "CIM block read from flash space", -1, 1},
+ {F_BLKWRFLASHINT, "CIM block write to flash space", -1, 1},
+ {F_BLKRDCTLINT, "CIM block read from CTL space", -1, 1},
+ {F_BLKWRCTLINT, "CIM block write to CTL space", -1, 1},
+ {F_BLKRDPLINT, "CIM block read from PL space", -1, 1},
+ {F_BLKWRPLINT, "CIM block write to PL space", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_CIM_HOST_INT_CAUSE, 0xffffffff,
+ cim_intr_info, NULL))
+ t3_fatal_err(adapter);
+}
+
+/*
+ * ULP RX interrupt handler.
+ */
+static void ulprx_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info ulprx_intr_info[] = {
+ {F_PARERR, "ULP RX parity error", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_ULPRX_INT_CAUSE, 0xffffffff,
+ ulprx_intr_info, NULL))
+ t3_fatal_err(adapter);
+}
+
+/*
+ * ULP TX interrupt handler.
+ */
+static void ulptx_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info ulptx_intr_info[] = {
+ {F_PBL_BOUND_ERR_CH0, "ULP TX channel 0 PBL out of bounds",
+ STAT_ULP_CH0_PBL_OOB, 0},
+ {F_PBL_BOUND_ERR_CH1, "ULP TX channel 1 PBL out of bounds",
+ STAT_ULP_CH1_PBL_OOB, 0},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_ULPTX_INT_CAUSE, 0xffffffff,
+ ulptx_intr_info, adapter->irq_stats))
+ t3_fatal_err(adapter);
+}
+
+#define ICSPI_FRM_ERR (F_ICSPI0_FIFO2X_RX_FRAMING_ERROR | \
+ F_ICSPI1_FIFO2X_RX_FRAMING_ERROR | F_ICSPI0_RX_FRAMING_ERROR | \
+ F_ICSPI1_RX_FRAMING_ERROR | F_ICSPI0_TX_FRAMING_ERROR | \
+ F_ICSPI1_TX_FRAMING_ERROR)
+#define OESPI_FRM_ERR (F_OESPI0_RX_FRAMING_ERROR | \
+ F_OESPI1_RX_FRAMING_ERROR | F_OESPI0_TX_FRAMING_ERROR | \
+ F_OESPI1_TX_FRAMING_ERROR | F_OESPI0_OFIFO2X_TX_FRAMING_ERROR | \
+ F_OESPI1_OFIFO2X_TX_FRAMING_ERROR)
+
+/*
+ * PM TX interrupt handler.
+ */
+static void pmtx_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info pmtx_intr_info[] = {
+ {F_ZERO_C_CMD_ERROR, "PMTX 0-length pcmd", -1, 1},
+ {ICSPI_FRM_ERR, "PMTX ispi framing error", -1, 1},
+ {OESPI_FRM_ERR, "PMTX ospi framing error", -1, 1},
+ {V_ICSPI_PAR_ERROR(M_ICSPI_PAR_ERROR),
+ "PMTX ispi parity error", -1, 1},
+ {V_OESPI_PAR_ERROR(M_OESPI_PAR_ERROR),
+ "PMTX ospi parity error", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_PM1_TX_INT_CAUSE, 0xffffffff,
+ pmtx_intr_info, NULL))
+ t3_fatal_err(adapter);
+}
+
+#define IESPI_FRM_ERR (F_IESPI0_FIFO2X_RX_FRAMING_ERROR | \
+ F_IESPI1_FIFO2X_RX_FRAMING_ERROR | F_IESPI0_RX_FRAMING_ERROR | \
+ F_IESPI1_RX_FRAMING_ERROR | F_IESPI0_TX_FRAMING_ERROR | \
+ F_IESPI1_TX_FRAMING_ERROR)
+#define OCSPI_FRM_ERR (F_OCSPI0_RX_FRAMING_ERROR | \
+ F_OCSPI1_RX_FRAMING_ERROR | F_OCSPI0_TX_FRAMING_ERROR | \
+ F_OCSPI1_TX_FRAMING_ERROR | F_OCSPI0_OFIFO2X_TX_FRAMING_ERROR | \
+ F_OCSPI1_OFIFO2X_TX_FRAMING_ERROR)
+
+/*
+ * PM RX interrupt handler.
+ */
+static void pmrx_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info pmrx_intr_info[] = {
+ {F_ZERO_E_CMD_ERROR, "PMRX 0-length pcmd", -1, 1},
+ {IESPI_FRM_ERR, "PMRX ispi framing error", -1, 1},
+ {OCSPI_FRM_ERR, "PMRX ospi framing error", -1, 1},
+ {V_IESPI_PAR_ERROR(M_IESPI_PAR_ERROR),
+ "PMRX ispi parity error", -1, 1},
+ {V_OCSPI_PAR_ERROR(M_OCSPI_PAR_ERROR),
+ "PMRX ospi parity error", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_PM1_RX_INT_CAUSE, 0xffffffff,
+ pmrx_intr_info, NULL))
+ t3_fatal_err(adapter);
+}
+
+/*
+ * CPL switch interrupt handler.
+ */
+static void cplsw_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info cplsw_intr_info[] = {
+/* { F_CIM_OVFL_ERROR, "CPL switch CIM overflow", -1, 1 }, */
+ {F_TP_FRAMING_ERROR, "CPL switch TP framing error", -1, 1},
+ {F_SGE_FRAMING_ERROR, "CPL switch SGE framing error", -1, 1},
+ {F_CIM_FRAMING_ERROR, "CPL switch CIM framing error", -1, 1},
+ {F_ZERO_SWITCH_ERROR, "CPL switch no-switch error", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_CPL_INTR_CAUSE, 0xffffffff,
+ cplsw_intr_info, NULL))
+ t3_fatal_err(adapter);
+}
+
+/*
+ * MPS interrupt handler.
+ */
+static void mps_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info mps_intr_info[] = {
+ {0x1ff, "MPS parity error", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_MPS_INT_CAUSE, 0xffffffff,
+ mps_intr_info, NULL))
+ t3_fatal_err(adapter);
+}
+
+#define MC7_INTR_FATAL (F_UE | V_PE(M_PE) | F_AE)
+
+/*
+ * MC7 interrupt handler.
+ */
+static void mc7_intr_handler(struct mc7 *mc7)
+{
+ struct adapter *adapter = mc7->adapter;
+ u32 cause = t3_read_reg(adapter, mc7->offset + A_MC7_INT_CAUSE);
+
+ if (cause & F_CE) {
+ mc7->stats.corr_err++;
+ CH_WARN(adapter, "%s MC7 correctable error at addr 0x%x, "
+ "data 0x%x 0x%x 0x%x\n", mc7->name,
+ t3_read_reg(adapter, mc7->offset + A_MC7_CE_ADDR),
+ t3_read_reg(adapter, mc7->offset + A_MC7_CE_DATA0),
+ t3_read_reg(adapter, mc7->offset + A_MC7_CE_DATA1),
+ t3_read_reg(adapter, mc7->offset + A_MC7_CE_DATA2));
+ }
+
+ if (cause & F_UE) {
+ mc7->stats.uncorr_err++;
+ CH_ALERT(adapter, "%s MC7 uncorrectable error at addr 0x%x, "
+ "data 0x%x 0x%x 0x%x\n", mc7->name,
+ t3_read_reg(adapter, mc7->offset + A_MC7_UE_ADDR),
+ t3_read_reg(adapter, mc7->offset + A_MC7_UE_DATA0),
+ t3_read_reg(adapter, mc7->offset + A_MC7_UE_DATA1),
+ t3_read_reg(adapter, mc7->offset + A_MC7_UE_DATA2));
+ }
+
+ if (G_PE(cause)) {
+ mc7->stats.parity_err++;
+ CH_ALERT(adapter, "%s MC7 parity error 0x%x\n",
+ mc7->name, G_PE(cause));
+ }
+
+ if (cause & F_AE) {
+ u32 addr = 0;
+
+ if (adapter->params.rev > 0)
+ addr = t3_read_reg(adapter,
+ mc7->offset + A_MC7_ERR_ADDR);
+ mc7->stats.addr_err++;
+ CH_ALERT(adapter, "%s MC7 address error: 0x%x\n",
+ mc7->name, addr);
+ }
+
+ if (cause & MC7_INTR_FATAL)
+ t3_fatal_err(adapter);
+
+ t3_write_reg(adapter, mc7->offset + A_MC7_INT_CAUSE, cause);
+}
+
+#define XGM_INTR_FATAL (V_TXFIFO_PRTY_ERR(M_TXFIFO_PRTY_ERR) | \
+ V_RXFIFO_PRTY_ERR(M_RXFIFO_PRTY_ERR))
+/*
+ * XGMAC interrupt handler.
+ */
+static int mac_intr_handler(struct adapter *adap, unsigned int idx)
+{
+ struct cmac *mac = &adap2pinfo(adap, idx)->mac;
+ u32 cause = t3_read_reg(adap, A_XGM_INT_CAUSE + mac->offset);
+
+ if (cause & V_TXFIFO_PRTY_ERR(M_TXFIFO_PRTY_ERR)) {
+ mac->stats.tx_fifo_parity_err++;
+ CH_ALERT(adap, "port%d: MAC TX FIFO parity error\n", idx);
+ }
+ if (cause & V_RXFIFO_PRTY_ERR(M_RXFIFO_PRTY_ERR)) {
+ mac->stats.rx_fifo_parity_err++;
+ CH_ALERT(adap, "port%d: MAC RX FIFO parity error\n", idx);
+ }
+ if (cause & F_TXFIFO_UNDERRUN)
+ mac->stats.tx_fifo_urun++;
+ if (cause & F_RXFIFO_OVERFLOW)
+ mac->stats.rx_fifo_ovfl++;
+ if (cause & V_SERDES_LOS(M_SERDES_LOS))
+ mac->stats.serdes_signal_loss++;
+ if (cause & F_XAUIPCSCTCERR)
+ mac->stats.xaui_pcs_ctc_err++;
+ if (cause & F_XAUIPCSALIGNCHANGE)
+ mac->stats.xaui_pcs_align_change++;
+
+ t3_write_reg(adap, A_XGM_INT_CAUSE + mac->offset, cause);
+ if (cause & XGM_INTR_FATAL)
+ t3_fatal_err(adap);
+ return cause != 0;
+}
+
+/*
+ * Interrupt handler for PHY events.
+ */
+int t3_phy_intr_handler(struct adapter *adapter)
+{
+ static const int intr_gpio_bits[] = { 8, 0x20 };
+
+ u32 i, cause = t3_read_reg(adapter, A_T3DBG_INT_CAUSE);
+
+ for_each_port(adapter, i) {
+ if (cause & intr_gpio_bits[i]) {
+ struct cphy *phy = &adap2pinfo(adapter, i)->phy;
+ int phy_cause = phy->ops->intr_handler(phy);
+
+ if (phy_cause & cphy_cause_link_change)
+ t3_link_changed(adapter, i);
+ if (phy_cause & cphy_cause_fifo_error)
+ phy->fifo_errors++;
+ }
+ }
+
+ t3_write_reg(adapter, A_T3DBG_INT_CAUSE, cause);
+ return 0;
+}
+
+/*
+ * T3 slow path (non-data) interrupt handler.
+ */
+int t3_slow_intr_handler(struct adapter *adapter)
+{
+ u32 cause = t3_read_reg(adapter, A_PL_INT_CAUSE0);
+
+ cause &= adapter->slow_intr_mask;
+ if (!cause)
+ return 0;
+ if (cause & F_PCIM0) {
+ if (is_pcie(adapter))
+ pcie_intr_handler(adapter);
+ else
+ pci_intr_handler(adapter);
+ }
+ if (cause & F_SGE3)
+ t3_sge_err_intr_handler(adapter);
+ if (cause & F_MC7_PMRX)
+ mc7_intr_handler(&adapter->pmrx);
+ if (cause & F_MC7_PMTX)
+ mc7_intr_handler(&adapter->pmtx);
+ if (cause & F_MC7_CM)
+ mc7_intr_handler(&adapter->cm);
+ if (cause & F_CIM)
+ cim_intr_handler(adapter);
+ if (cause & F_TP1)
+ tp_intr_handler(adapter);
+ if (cause & F_ULP2_RX)
+ ulprx_intr_handler(adapter);
+ if (cause & F_ULP2_TX)
+ ulptx_intr_handler(adapter);
+ if (cause & F_PM1_RX)
+ pmrx_intr_handler(adapter);
+ if (cause & F_PM1_TX)
+ pmtx_intr_handler(adapter);
+ if (cause & F_CPL_SWITCH)
+ cplsw_intr_handler(adapter);
+ if (cause & F_MPS0)
+ mps_intr_handler(adapter);
+ if (cause & F_MC5A)
+ t3_mc5_intr_handler(&adapter->mc5);
+ if (cause & F_XGMAC0_0)
+ mac_intr_handler(adapter, 0);
+ if (cause & F_XGMAC0_1)
+ mac_intr_handler(adapter, 1);
+ if (cause & F_T3DBG)
+ t3_os_ext_intr_handler(adapter);
+
+ /* Clear the interrupts just processed. */
+ t3_write_reg(adapter, A_PL_INT_CAUSE0, cause);
+ t3_read_reg(adapter, A_PL_INT_CAUSE0); /* flush */
+ return 1;
+}
+
+/**
+ * t3_intr_enable - enable interrupts
+ * @adapter: the adapter whose interrupts should be enabled
+ *
+ * Enable interrupts by setting the interrupt enable registers of the
+ * various HW modules and then enabling the top-level interrupt
+ * concentrator.
+ */
+void t3_intr_enable(struct adapter *adapter)
+{
+ static const struct addr_val_pair intr_en_avp[] = {
+ {A_SG_INT_ENABLE, SGE_INTR_MASK},
+ {A_MC7_INT_ENABLE, MC7_INTR_MASK},
+ {A_MC7_INT_ENABLE - MC7_PMRX_BASE_ADDR + MC7_PMTX_BASE_ADDR,
+ MC7_INTR_MASK},
+ {A_MC7_INT_ENABLE - MC7_PMRX_BASE_ADDR + MC7_CM_BASE_ADDR,
+ MC7_INTR_MASK},
+ {A_MC5_DB_INT_ENABLE, MC5_INTR_MASK},
+ {A_ULPRX_INT_ENABLE, ULPRX_INTR_MASK},
+ {A_TP_INT_ENABLE, 0x3bfffff},
+ {A_PM1_TX_INT_ENABLE, PMTX_INTR_MASK},
+ {A_PM1_RX_INT_ENABLE, PMRX_INTR_MASK},
+ {A_CIM_HOST_INT_ENABLE, CIM_INTR_MASK},
+ {A_MPS_INT_ENABLE, MPS_INTR_MASK},
+ };
+
+ adapter->slow_intr_mask = PL_INTR_MASK;
+
+ t3_write_regs(adapter, intr_en_avp, ARRAY_SIZE(intr_en_avp), 0);
+
+ if (adapter->params.rev > 0) {
+ t3_write_reg(adapter, A_CPL_INTR_ENABLE,
+ CPLSW_INTR_MASK | F_CIM_OVFL_ERROR);
+ t3_write_reg(adapter, A_ULPTX_INT_ENABLE,
+ ULPTX_INTR_MASK | F_PBL_BOUND_ERR_CH0 |
+ F_PBL_BOUND_ERR_CH1);
+ } else {
+ t3_write_reg(adapter, A_CPL_INTR_ENABLE, CPLSW_INTR_MASK);
+ t3_write_reg(adapter, A_ULPTX_INT_ENABLE, ULPTX_INTR_MASK);
+ }
+
+ t3_write_reg(adapter, A_T3DBG_GPIO_ACT_LOW,
+ adapter_info(adapter)->gpio_intr);
+ t3_write_reg(adapter, A_T3DBG_INT_ENABLE,
+ adapter_info(adapter)->gpio_intr);
+ if (is_pcie(adapter))
+ t3_write_reg(adapter, A_PCIE_INT_ENABLE, PCIE_INTR_MASK);
+ else
+ t3_write_reg(adapter, A_PCIX_INT_ENABLE, PCIX_INTR_MASK);
+ t3_write_reg(adapter, A_PL_INT_ENABLE0, adapter->slow_intr_mask);
+ t3_read_reg(adapter, A_PL_INT_ENABLE0); /* flush */
+}
+
+/**
+ * t3_intr_disable - disable a card's interrupts
+ * @adapter: the adapter whose interrupts should be disabled
+ *
+ * Disable interrupts. We only disable the top-level interrupt
+ * concentrator and the SGE data interrupts.
+ */
+void t3_intr_disable(struct adapter *adapter)
+{
+ t3_write_reg(adapter, A_PL_INT_ENABLE0, 0);
+ t3_read_reg(adapter, A_PL_INT_ENABLE0); /* flush */
+ adapter->slow_intr_mask = 0;
+}
+
+/**
+ * t3_intr_clear - clear all interrupts
+ * @adapter: the adapter whose interrupts should be cleared
+ *
+ * Clears all interrupts.
+ */
+void t3_intr_clear(struct adapter *adapter)
+{
+ static const unsigned int cause_reg_addr[] = {
+ A_SG_INT_CAUSE,
+ A_SG_RSPQ_FL_STATUS,
+ A_PCIX_INT_CAUSE,
+ A_MC7_INT_CAUSE,
+ A_MC7_INT_CAUSE - MC7_PMRX_BASE_ADDR + MC7_PMTX_BASE_ADDR,
+ A_MC7_INT_CAUSE - MC7_PMRX_BASE_ADDR + MC7_CM_BASE_ADDR,
+ A_CIM_HOST_INT_CAUSE,
+ A_TP_INT_CAUSE,
+ A_MC5_DB_INT_CAUSE,
+ A_ULPRX_INT_CAUSE,
+ A_ULPTX_INT_CAUSE,
+ A_CPL_INTR_CAUSE,
+ A_PM1_TX_INT_CAUSE,
+ A_PM1_RX_INT_CAUSE,
+ A_MPS_INT_CAUSE,
+ A_T3DBG_INT_CAUSE,
+ };
+ unsigned int i;
+
+ /* Clear PHY and MAC interrupts for each port. */
+ for_each_port(adapter, i)
+ t3_port_intr_clear(adapter, i);
+
+ for (i = 0; i < ARRAY_SIZE(cause_reg_addr); ++i)
+ t3_write_reg(adapter, cause_reg_addr[i], 0xffffffff);
+
+ t3_write_reg(adapter, A_PL_INT_CAUSE0, 0xffffffff);
+ t3_read_reg(adapter, A_PL_INT_CAUSE0); /* flush */
+}
+
+/**
+ * t3_port_intr_enable - enable port-specific interrupts
+ * @adapter: associated adapter
+ * @idx: index of port whose interrupts should be enabled
+ *
+ * Enable port-specific (i.e., MAC and PHY) interrupts for the given
+ * adapter port.
+ */
+void t3_port_intr_enable(struct adapter *adapter, int idx)
+{
+ struct cphy *phy = &adap2pinfo(adapter, idx)->phy;
+
+ t3_write_reg(adapter, XGM_REG(A_XGM_INT_ENABLE, idx), XGM_INTR_MASK);
+ t3_read_reg(adapter, XGM_REG(A_XGM_INT_ENABLE, idx)); /* flush */
+ phy->ops->intr_enable(phy);
+}
+
+/**
+ * t3_port_intr_disable - disable port-specific interrupts
+ * @adapter: associated adapter
+ * @idx: index of port whose interrupts should be disabled
+ *
+ * Disable port-specific (i.e., MAC and PHY) interrupts for the given
+ * adapter port.
+ */
+void t3_port_intr_disable(struct adapter *adapter, int idx)
+{
+ struct cphy *phy = &adap2pinfo(adapter, idx)->phy;
+
+ t3_write_reg(adapter, XGM_REG(A_XGM_INT_ENABLE, idx), 0);
+ t3_read_reg(adapter, XGM_REG(A_XGM_INT_ENABLE, idx)); /* flush */
+ phy->ops->intr_disable(phy);
+}
+
+/**
+ * t3_port_intr_clear - clear port-specific interrupts
+ * @adapter: associated adapter
+ * @idx: index of port whose interrupts to clear
+ *
+ * Clear port-specific (i.e., MAC and PHY) interrupts for the given
+ * adapter port.
+ */
+void t3_port_intr_clear(struct adapter *adapter, int idx)
+{
+ struct cphy *phy = &adap2pinfo(adapter, idx)->phy;
+
+ t3_write_reg(adapter, XGM_REG(A_XGM_INT_CAUSE, idx), 0xffffffff);
+ t3_read_reg(adapter, XGM_REG(A_XGM_INT_CAUSE, idx)); /* flush */
+ phy->ops->intr_clear(phy);
+}
+
+/**
+ * t3_sge_write_context - write an SGE context
+ * @adapter: the adapter
+ * @id: the context id
+ * @type: the context type
+ *
+ * Program an SGE context with the values already loaded in the
+ * CONTEXT_DATA? registers.
+ */
+static int t3_sge_write_context(struct adapter *adapter, unsigned int id,
+ unsigned int type)
+{
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0xffffffff);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff);
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(1) | type | V_CONTEXT(id));
+ return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+ 0, 5, 1);
+}
+
+/**
+ * t3_sge_init_ecntxt - initialize an SGE egress context
+ * @adapter: the adapter to configure
+ * @id: the context id
+ * @gts_enable: whether to enable GTS for the context
+ * @type: the egress context type
+ * @respq: associated response queue
+ * @base_addr: base address of queue
+ * @size: number of queue entries
+ * @token: uP token
+ * @gen: initial generation value for the context
+ * @cidx: consumer pointer
+ *
+ * Initialize an SGE egress context and make it ready for use. If the
+ * platform allows concurrent context operations, the caller is
+ * responsible for appropriate locking.
+ */
+int t3_sge_init_ecntxt(struct adapter *adapter, unsigned int id, int gts_enable,
+ enum sge_context_type type, int respq, u64 base_addr,
+ unsigned int size, unsigned int token, int gen,
+ unsigned int cidx)
+{
+ unsigned int credits = type == SGE_CNTXT_OFLD ? 0 : FW_WR_NUM;
+
+ if (base_addr & 0xfff) /* must be 4K aligned */
+ return -EINVAL;
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ base_addr >>= 12;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA0, V_EC_INDEX(cidx) |
+ V_EC_CREDITS(credits) | V_EC_GTS(gts_enable));
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA1, V_EC_SIZE(size) |
+ V_EC_BASE_LO(base_addr & 0xffff));
+ base_addr >>= 16;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA2, base_addr);
+ base_addr >>= 32;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA3,
+ V_EC_BASE_HI(base_addr & 0xf) | V_EC_RESPQ(respq) |
+ V_EC_TYPE(type) | V_EC_GEN(gen) | V_EC_UP_TOKEN(token) |
+ F_EC_VALID);
+ return t3_sge_write_context(adapter, id, F_EGRESS);
+}
+
+/**
+ * t3_sge_init_flcntxt - initialize an SGE free-buffer list context
+ * @adapter: the adapter to configure
+ * @id: the context id
+ * @gts_enable: whether to enable GTS for the context
+ * @base_addr: base address of queue
+ * @size: number of queue entries
+ * @bsize: size of each buffer for this queue
+ * @cong_thres: threshold to signal congestion to upstream producers
+ * @gen: initial generation value for the context
+ * @cidx: consumer pointer
+ *
+ * Initialize an SGE free list context and make it ready for use. The
+ * caller is responsible for ensuring only one context operation occurs
+ * at a time.
+ */
+int t3_sge_init_flcntxt(struct adapter *adapter, unsigned int id,
+ int gts_enable, u64 base_addr, unsigned int size,
+ unsigned int bsize, unsigned int cong_thres, int gen,
+ unsigned int cidx)
+{
+ if (base_addr & 0xfff) /* must be 4K aligned */
+ return -EINVAL;
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ base_addr >>= 12;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA0, base_addr);
+ base_addr >>= 32;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA1,
+ V_FL_BASE_HI((u32) base_addr) |
+ V_FL_INDEX_LO(cidx & M_FL_INDEX_LO));
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA2, V_FL_SIZE(size) |
+ V_FL_GEN(gen) | V_FL_INDEX_HI(cidx >> 12) |
+ V_FL_ENTRY_SIZE_LO(bsize & M_FL_ENTRY_SIZE_LO));
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA3,
+ V_FL_ENTRY_SIZE_HI(bsize >> (32 - S_FL_ENTRY_SIZE_LO)) |
+ V_FL_CONG_THRES(cong_thres) | V_FL_GTS(gts_enable));
+ return t3_sge_write_context(adapter, id, F_FREELIST);
+}
+
+/**
+ * t3_sge_init_rspcntxt - initialize an SGE response queue context
+ * @adapter: the adapter to configure
+ * @id: the context id
+ * @irq_vec_idx: MSI-X interrupt vector index, 0 if no MSI-X, -1 if no IRQ
+ * @base_addr: base address of queue
+ * @size: number of queue entries
+ * @fl_thres: threshold for selecting the normal or jumbo free list
+ * @gen: initial generation value for the context
+ * @cidx: consumer pointer
+ *
+ * Initialize an SGE response queue context and make it ready for use.
+ * The caller is responsible for ensuring only one context operation
+ * occurs at a time.
+ */
+int t3_sge_init_rspcntxt(struct adapter *adapter, unsigned int id,
+ int irq_vec_idx, u64 base_addr, unsigned int size,
+ unsigned int fl_thres, int gen, unsigned int cidx)
+{
+ unsigned int intr = 0;
+
+ if (base_addr & 0xfff) /* must be 4K aligned */
+ return -EINVAL;
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ base_addr >>= 12;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA0, V_CQ_SIZE(size) |
+ V_CQ_INDEX(cidx));
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA1, base_addr);
+ base_addr >>= 32;
+ if (irq_vec_idx >= 0)
+ intr = V_RQ_MSI_VEC(irq_vec_idx) | F_RQ_INTR_EN;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA2,
+ V_CQ_BASE_HI((u32) base_addr) | intr | V_RQ_GEN(gen));
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA3, fl_thres);
+ return t3_sge_write_context(adapter, id, F_RESPONSEQ);
+}
+
+/**
+ * t3_sge_init_cqcntxt - initialize an SGE completion queue context
+ * @adapter: the adapter to configure
+ * @id: the context id
+ * @base_addr: base address of queue
+ * @size: number of queue entries
+ * @rspq: response queue for async notifications
+ * @ovfl_mode: CQ overflow mode
+ * @credits: completion queue credits
+ * @credit_thres: the credit threshold
+ *
+ * Initialize an SGE completion queue context and make it ready for use.
+ * The caller is responsible for ensuring only one context operation
+ * occurs at a time.
+ */
+int t3_sge_init_cqcntxt(struct adapter *adapter, unsigned int id, u64 base_addr,
+ unsigned int size, int rspq, int ovfl_mode,
+ unsigned int credits, unsigned int credit_thres)
+{
+ if (base_addr & 0xfff) /* must be 4K aligned */
+ return -EINVAL;
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ base_addr >>= 12;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA0, V_CQ_SIZE(size));
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA1, base_addr);
+ base_addr >>= 32;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA2,
+ V_CQ_BASE_HI((u32) base_addr) | V_CQ_RSPQ(rspq) |
+ V_CQ_GEN(1) | V_CQ_OVERFLOW_MODE(ovfl_mode));
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA3, V_CQ_CREDITS(credits) |
+ V_CQ_CREDIT_THRES(credit_thres));
+ return t3_sge_write_context(adapter, id, F_CQ);
+}
+
+/**
+ * t3_sge_enable_ecntxt - enable/disable an SGE egress context
+ * @adapter: the adapter
+ * @id: the egress context id
+ * @enable: enable (1) or disable (0) the context
+ *
+ * Enable or disable an SGE egress context. The caller is responsible for
+ * ensuring only one context operation occurs at a time.
+ */
+int t3_sge_enable_ecntxt(struct adapter *adapter, unsigned int id, int enable)
+{
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK3, F_EC_VALID);
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA3, V_EC_VALID(enable));
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(1) | F_EGRESS | V_CONTEXT(id));
+ return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+ 0, 5, 1);
+}
+
+/**
+ * t3_sge_disable_fl - disable an SGE free-buffer list
+ * @adapter: the adapter
+ * @id: the free list context id
+ *
+ * Disable an SGE free-buffer list. The caller is responsible for
+ * ensuring only one context operation occurs at a time.
+ */
+int t3_sge_disable_fl(struct adapter *adapter, unsigned int id)
+{
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK2, V_FL_SIZE(M_FL_SIZE));
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA2, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(1) | F_FREELIST | V_CONTEXT(id));
+ return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+ 0, 5, 1);
+}
+
+/**
+ * t3_sge_disable_rspcntxt - disable an SGE response queue
+ * @adapter: the adapter
+ * @id: the response queue context id
+ *
+ * Disable an SGE response queue. The caller is responsible for
+ * ensuring only one context operation occurs at a time.
+ */
+int t3_sge_disable_rspcntxt(struct adapter *adapter, unsigned int id)
+{
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK0, V_CQ_SIZE(M_CQ_SIZE));
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA0, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(1) | F_RESPONSEQ | V_CONTEXT(id));
+ return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+ 0, 5, 1);
+}
+
+/**
+ * t3_sge_disable_cqcntxt - disable an SGE completion queue
+ * @adapter: the adapter
+ * @id: the completion queue context id
+ *
+ * Disable an SGE completion queue. The caller is responsible for
+ * ensuring only one context operation occurs at a time.
+ */
+int t3_sge_disable_cqcntxt(struct adapter *adapter, unsigned int id)
+{
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK0, V_CQ_SIZE(M_CQ_SIZE));
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA0, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(1) | F_CQ | V_CONTEXT(id));
+ return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+ 0, 5, 1);
+}
+
+/**
+ * t3_sge_cqcntxt_op - perform an operation on a completion queue context
+ * @adapter: the adapter
+ * @id: the context id
+ * @op: the operation to perform
+ *
+ * Perform the selected operation on an SGE completion queue context.
+ * The caller is responsible for ensuring only one context operation
+ * occurs at a time.
+ */
+int t3_sge_cqcntxt_op(struct adapter *adapter, unsigned int id, unsigned int op,
+ unsigned int credits)
+{
+ u32 val;
+
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA0, credits << 16);
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD, V_CONTEXT_CMD_OPCODE(op) |
+ V_CONTEXT(id) | F_CQ);
+ if (t3_wait_op_done_val(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+ 0, 5, 1, &val))
+ return -EIO;
+
+ if (op >= 2 && op < 7) {
+ if (adapter->params.rev > 0)
+ return G_CQ_INDEX(val);
+
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(0) | F_CQ | V_CONTEXT(id));
+ if (t3_wait_op_done(adapter, A_SG_CONTEXT_CMD,
+ F_CONTEXT_CMD_BUSY, 0, 5, 1))
+ return -EIO;
+ return G_CQ_INDEX(t3_read_reg(adapter, A_SG_CONTEXT_DATA0));
+ }
+ return 0;
+}
+
+/**
+ * t3_sge_read_context - read an SGE context
+ * @type: the context type
+ * @adapter: the adapter
+ * @id: the context id
+ * @data: holds the retrieved context
+ *
+ * Read an SGE egress context. The caller is responsible for ensuring
+ * only one context operation occurs at a time.
+ */
+static int t3_sge_read_context(unsigned int type, struct adapter *adapter,
+ unsigned int id, u32 data[4])
+{
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(0) | type | V_CONTEXT(id));
+ if (t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, 0,
+ 5, 1))
+ return -EIO;
+ data[0] = t3_read_reg(adapter, A_SG_CONTEXT_DATA0);
+ data[1] = t3_read_reg(adapter, A_SG_CONTEXT_DATA1);
+ data[2] = t3_read_reg(adapter, A_SG_CONTEXT_DATA2);
+ data[3] = t3_read_reg(adapter, A_SG_CONTEXT_DATA3);
+ return 0;
+}
+
+/**
+ * t3_sge_read_ecntxt - read an SGE egress context
+ * @adapter: the adapter
+ * @id: the context id
+ * @data: holds the retrieved context
+ *
+ * Read an SGE egress context. The caller is responsible for ensuring
+ * only one context operation occurs at a time.
+ */
+int t3_sge_read_ecntxt(struct adapter *adapter, unsigned int id, u32 data[4])
+{
+ if (id >= 65536)
+ return -EINVAL;
+ return t3_sge_read_context(F_EGRESS, adapter, id, data);
+}
+
+/**
+ * t3_sge_read_cq - read an SGE CQ context
+ * @adapter: the adapter
+ * @id: the context id
+ * @data: holds the retrieved context
+ *
+ * Read an SGE CQ context. The caller is responsible for ensuring
+ * only one context operation occurs at a time.
+ */
+int t3_sge_read_cq(struct adapter *adapter, unsigned int id, u32 data[4])
+{
+ if (id >= 65536)
+ return -EINVAL;
+ return t3_sge_read_context(F_CQ, adapter, id, data);
+}
+
+/**
+ * t3_sge_read_fl - read an SGE free-list context
+ * @adapter: the adapter
+ * @id: the context id
+ * @data: holds the retrieved context
+ *
+ * Read an SGE free-list context. The caller is responsible for ensuring
+ * only one context operation occurs at a time.
+ */
+int t3_sge_read_fl(struct adapter *adapter, unsigned int id, u32 data[4])
+{
+ if (id >= SGE_QSETS * 2)
+ return -EINVAL;
+ return t3_sge_read_context(F_FREELIST, adapter, id, data);
+}
+
+/**
+ * t3_sge_read_rspq - read an SGE response queue context
+ * @adapter: the adapter
+ * @id: the context id
+ * @data: holds the retrieved context
+ *
+ * Read an SGE response queue context. The caller is responsible for
+ * ensuring only one context operation occurs at a time.
+ */
+int t3_sge_read_rspq(struct adapter *adapter, unsigned int id, u32 data[4])
+{
+ if (id >= SGE_QSETS)
+ return -EINVAL;
+ return t3_sge_read_context(F_RESPONSEQ, adapter, id, data);
+}
+
+/**
+ * t3_config_rss - configure Rx packet steering
+ * @adapter: the adapter
+ * @rss_config: RSS settings (written to TP_RSS_CONFIG)
+ * @cpus: values for the CPU lookup table (0xff terminated)
+ * @rspq: values for the response queue lookup table (0xffff terminated)
+ *
+ * Programs the receive packet steering logic. @cpus and @rspq provide
+ * the values for the CPU and response queue lookup tables. If they
+ * provide fewer values than the size of the tables the supplied values
+ * are used repeatedly until the tables are fully populated.
+ */
+void t3_config_rss(struct adapter *adapter, unsigned int rss_config,
+ const u8 * cpus, const u16 *rspq)
+{
+ int i, j, cpu_idx = 0, q_idx = 0;
+
+ if (cpus)
+ for (i = 0; i < RSS_TABLE_SIZE; ++i) {
+ u32 val = i << 16;
+
+ for (j = 0; j < 2; ++j) {
+ val |= (cpus[cpu_idx++] & 0x3f) << (8 * j);
+ if (cpus[cpu_idx] == 0xff)
+ cpu_idx = 0;
+ }
+ t3_write_reg(adapter, A_TP_RSS_LKP_TABLE, val);
+ }
+
+ if (rspq)
+ for (i = 0; i < RSS_TABLE_SIZE; ++i) {
+ t3_write_reg(adapter, A_TP_RSS_MAP_TABLE,
+ (i << 16) | rspq[q_idx++]);
+ if (rspq[q_idx] == 0xffff)
+ q_idx = 0;
+ }
+
+ t3_write_reg(adapter, A_TP_RSS_CONFIG, rss_config);
+}
+
+/**
+ * t3_read_rss - read the contents of the RSS tables
+ * @adapter: the adapter
+ * @lkup: holds the contents of the RSS lookup table
+ * @map: holds the contents of the RSS map table
+ *
+ * Reads the contents of the receive packet steering tables.
+ */
+int t3_read_rss(struct adapter *adapter, u8 * lkup, u16 *map)
+{
+ int i;
+ u32 val;
+
+ if (lkup)
+ for (i = 0; i < RSS_TABLE_SIZE; ++i) {
+ t3_write_reg(adapter, A_TP_RSS_LKP_TABLE,
+ 0xffff0000 | i);
+ val = t3_read_reg(adapter, A_TP_RSS_LKP_TABLE);
+ if (!(val & 0x80000000))
+ return -EAGAIN;
+ *lkup++ = val;
+ *lkup++ = (val >> 8);
+ }
+
+ if (map)
+ for (i = 0; i < RSS_TABLE_SIZE; ++i) {
+ t3_write_reg(adapter, A_TP_RSS_MAP_TABLE,
+ 0xffff0000 | i);
+ val = t3_read_reg(adapter, A_TP_RSS_MAP_TABLE);
+ if (!(val & 0x80000000))
+ return -EAGAIN;
+ *map++ = val;
+ }
+ return 0;
+}
+
+/**
+ * t3_tp_set_offload_mode - put TP in NIC/offload mode
+ * @adap: the adapter
+ * @enable: 1 to select offload mode, 0 for regular NIC
+ *
+ * Switches TP to NIC/offload mode.
+ */
+void t3_tp_set_offload_mode(struct adapter *adap, int enable)
+{
+ if (is_offload(adap) || !enable)
+ t3_set_reg_field(adap, A_TP_IN_CONFIG, F_NICMODE,
+ V_NICMODE(!enable));
+}
+
+/**
+ * pm_num_pages - calculate the number of pages of the payload memory
+ * @mem_size: the size of the payload memory
+ * @pg_size: the size of each payload memory page
+ *
+ * Calculate the number of pages, each of the given size, that fit in a
+ * memory of the specified size, respecting the HW requirement that the
+ * number of pages must be a multiple of 24.
+ */
+static inline unsigned int pm_num_pages(unsigned int mem_size,
+ unsigned int pg_size)
+{
+ unsigned int n = mem_size / pg_size;
+
+ return n - n % 24;
+}
+
+#define mem_region(adap, start, size, reg) \
+ t3_write_reg((adap), A_ ## reg, (start)); \
+ start += size
+
+/*
+ * partition_mem - partition memory and configure TP memory settings
+ * @adap: the adapter
+ * @p: the TP parameters
+ *
+ * Partitions context and payload memory and configures TP's memory
+ * registers.
+ */
+static void partition_mem(struct adapter *adap, const struct tp_params *p)
+{
+ unsigned int m, pstructs, tids = t3_mc5_size(&adap->mc5);
+ unsigned int timers = 0, timers_shift = 22;
+
+ if (adap->params.rev > 0) {
+ if (tids <= 16 * 1024) {
+ timers = 1;
+ timers_shift = 16;
+ } else if (tids <= 64 * 1024) {
+ timers = 2;
+ timers_shift = 18;
+ } else if (tids <= 256 * 1024) {
+ timers = 3;
+ timers_shift = 20;
+ }
+ }
+
+ t3_write_reg(adap, A_TP_PMM_SIZE,
+ p->chan_rx_size | (p->chan_tx_size >> 16));
+
+ t3_write_reg(adap, A_TP_PMM_TX_BASE, 0);
+ t3_write_reg(adap, A_TP_PMM_TX_PAGE_SIZE, p->tx_pg_size);
+ t3_write_reg(adap, A_TP_PMM_TX_MAX_PAGE, p->tx_num_pgs);
+ t3_set_reg_field(adap, A_TP_PARA_REG3, V_TXDATAACKIDX(M_TXDATAACKIDX),
+ V_TXDATAACKIDX(fls(p->tx_pg_size) - 12));
+
+ t3_write_reg(adap, A_TP_PMM_RX_BASE, 0);
+ t3_write_reg(adap, A_TP_PMM_RX_PAGE_SIZE, p->rx_pg_size);
+ t3_write_reg(adap, A_TP_PMM_RX_MAX_PAGE, p->rx_num_pgs);
+
+ pstructs = p->rx_num_pgs + p->tx_num_pgs;
+ /* Add a bit of headroom and make multiple of 24 */
+ pstructs += 48;
+ pstructs -= pstructs % 24;
+ t3_write_reg(adap, A_TP_CMM_MM_MAX_PSTRUCT, pstructs);
+
+ m = tids * TCB_SIZE;
+ mem_region(adap, m, (64 << 10) * 64, SG_EGR_CNTX_BADDR);
+ mem_region(adap, m, (64 << 10) * 64, SG_CQ_CONTEXT_BADDR);
+ t3_write_reg(adap, A_TP_CMM_TIMER_BASE, V_CMTIMERMAXNUM(timers) | m);
+ m += ((p->ntimer_qs - 1) << timers_shift) + (1 << 22);
+ mem_region(adap, m, pstructs * 64, TP_CMM_MM_BASE);
+ mem_region(adap, m, 64 * (pstructs / 24), TP_CMM_MM_PS_FLST_BASE);
+ mem_region(adap, m, 64 * (p->rx_num_pgs / 24), TP_CMM_MM_RX_FLST_BASE);
+ mem_region(adap, m, 64 * (p->tx_num_pgs / 24), TP_CMM_MM_TX_FLST_BASE);
+
+ m = (m + 4095) & ~0xfff;
+ t3_write_reg(adap, A_CIM_SDRAM_BASE_ADDR, m);
+ t3_write_reg(adap, A_CIM_SDRAM_ADDR_SIZE, p->cm_size - m);
+
+ tids = (p->cm_size - m - (3 << 20)) / 3072 - 32;
+ m = t3_mc5_size(&adap->mc5) - adap->params.mc5.nservers -
+ adap->params.mc5.nfilters - adap->params.mc5.nroutes;
+ if (tids < m)
+ adap->params.mc5.nservers += m - tids;
+}
+
+static inline void tp_wr_indirect(struct adapter *adap, unsigned int addr,
+ u32 val)
+{
+ t3_write_reg(adap, A_TP_PIO_ADDR, addr);
+ t3_write_reg(adap, A_TP_PIO_DATA, val);
+}
+
+static void tp_config(struct adapter *adap, const struct tp_params *p)
+{
+ unsigned int v;
+
+ t3_write_reg(adap, A_TP_GLOBAL_CONFIG, F_TXPACINGENABLE | F_PATHMTU |
+ F_IPCHECKSUMOFFLOAD | F_UDPCHECKSUMOFFLOAD |
+ F_TCPCHECKSUMOFFLOAD | V_IPTTL(64));
+ t3_write_reg(adap, A_TP_TCP_OPTIONS, V_MTUDEFAULT(576) |
+ F_MTUENABLE | V_WINDOWSCALEMODE(1) |
+ V_TIMESTAMPSMODE(1) | V_SACKMODE(1) | V_SACKRX(1));
+ t3_write_reg(adap, A_TP_DACK_CONFIG, V_AUTOSTATE3(1) |
+ V_AUTOSTATE2(1) | V_AUTOSTATE1(0) |
+ V_BYTETHRESHOLD(16384) | V_MSSTHRESHOLD(2) |
+ F_AUTOCAREFUL | F_AUTOENABLE | V_DACK_MODE(1));
+ t3_set_reg_field(adap, A_TP_IN_CONFIG, F_IPV6ENABLE | F_NICMODE,
+ F_IPV6ENABLE | F_NICMODE);
+ t3_write_reg(adap, A_TP_TX_RESOURCE_LIMIT, 0x18141814);
+ t3_write_reg(adap, A_TP_PARA_REG4, 0x5050105);
+ t3_set_reg_field(adap, A_TP_PARA_REG6,
+ adap->params.rev > 0 ? F_ENABLEESND : F_T3A_ENABLEESND,
+ 0);
+
+ v = t3_read_reg(adap, A_TP_PC_CONFIG);
+ v &= ~(F_ENABLEEPCMDAFULL | F_ENABLEOCSPIFULL);
+ t3_write_reg(adap, A_TP_PC_CONFIG, v | F_TXDEFERENABLE |
+ F_MODULATEUNIONMODE | F_HEARBEATDACK |
+ F_TXCONGESTIONMODE | F_RXCONGESTIONMODE);
+
+ v = t3_read_reg(adap, A_TP_PC_CONFIG2);
+ v &= ~F_CHDRAFULL;
+ t3_write_reg(adap, A_TP_PC_CONFIG2, v);
+
+ if (adap->params.rev > 0) {
+ tp_wr_indirect(adap, A_TP_EGRESS_CONFIG, F_REWRITEFORCETOSIZE);
+ t3_set_reg_field(adap, A_TP_PARA_REG3, F_TXPACEAUTO,
+ F_TXPACEAUTO);
+ t3_set_reg_field(adap, A_TP_PC_CONFIG, F_LOCKTID, F_LOCKTID);
+ t3_set_reg_field(adap, A_TP_PARA_REG3, 0, F_TXPACEAUTOSTRICT);
+ } else
+ t3_set_reg_field(adap, A_TP_PARA_REG3, 0, F_TXPACEFIXED);
+
+ t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT1, 0x12121212);
+ t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT0, 0x12121212);
+ t3_write_reg(adap, A_TP_MOD_CHANNEL_WEIGHT, 0x1212);
+}
+
+/* Desired TP timer resolution in usec */
+#define TP_TMR_RES 50
+
+/* TCP timer values in ms */
+#define TP_DACK_TIMER 50
+#define TP_RTO_MIN 250
+
+/**
+ * tp_set_timers - set TP timing parameters
+ * @adap: the adapter to set
+ * @core_clk: the core clock frequency in Hz
+ *
+ * Set TP's timing parameters, such as the various timer resolutions and
+ * the TCP timer values.
+ */
+static void tp_set_timers(struct adapter *adap, unsigned int core_clk)
+{
+ unsigned int tre = fls(core_clk / (1000000 / TP_TMR_RES)) - 1;
+ unsigned int dack_re = fls(core_clk / 5000) - 1; /* 200us */
+ unsigned int tstamp_re = fls(core_clk / 1000); /* 1ms, at least */
+ unsigned int tps = core_clk >> tre;
+
+ t3_write_reg(adap, A_TP_TIMER_RESOLUTION, V_TIMERRESOLUTION(tre) |
+ V_DELAYEDACKRESOLUTION(dack_re) |
+ V_TIMESTAMPRESOLUTION(tstamp_re));
+ t3_write_reg(adap, A_TP_DACK_TIMER,
+ (core_clk >> dack_re) / (1000 / TP_DACK_TIMER));
+ t3_write_reg(adap, A_TP_TCP_BACKOFF_REG0, 0x3020100);
+ t3_write_reg(adap, A_TP_TCP_BACKOFF_REG1, 0x7060504);
+ t3_write_reg(adap, A_TP_TCP_BACKOFF_REG2, 0xb0a0908);
+ t3_write_reg(adap, A_TP_TCP_BACKOFF_REG3, 0xf0e0d0c);
+ t3_write_reg(adap, A_TP_SHIFT_CNT, V_SYNSHIFTMAX(6) |
+ V_RXTSHIFTMAXR1(4) | V_RXTSHIFTMAXR2(15) |
+ V_PERSHIFTBACKOFFMAX(8) | V_PERSHIFTMAX(8) |
+ V_KEEPALIVEMAX(9));
+
+#define SECONDS * tps
+
+ t3_write_reg(adap, A_TP_MSL, adap->params.rev > 0 ? 0 : 2 SECONDS);
+ t3_write_reg(adap, A_TP_RXT_MIN, tps / (1000 / TP_RTO_MIN));
+ t3_write_reg(adap, A_TP_RXT_MAX, 64 SECONDS);
+ t3_write_reg(adap, A_TP_PERS_MIN, 5 SECONDS);
+ t3_write_reg(adap, A_TP_PERS_MAX, 64 SECONDS);
+ t3_write_reg(adap, A_TP_KEEP_IDLE, 7200 SECONDS);
+ t3_write_reg(adap, A_TP_KEEP_INTVL, 75 SECONDS);
+ t3_write_reg(adap, A_TP_INIT_SRTT, 3 SECONDS);
+ t3_write_reg(adap, A_TP_FINWAIT2_TIMER, 600 SECONDS);
+
+#undef SECONDS
+}
+
+/**
+ * t3_tp_set_coalescing_size - set receive coalescing size
+ * @adap: the adapter
+ * @size: the receive coalescing size
+ * @psh: whether a set PSH bit should deliver coalesced data
+ *
+ * Set the receive coalescing size and PSH bit handling.
+ */
+int t3_tp_set_coalescing_size(struct adapter *adap, unsigned int size, int psh)
+{
+ u32 val;
+
+ if (size > MAX_RX_COALESCING_LEN)
+ return -EINVAL;
+
+ val = t3_read_reg(adap, A_TP_PARA_REG3);
+ val &= ~(F_RXCOALESCEENABLE | F_RXCOALESCEPSHEN);
+
+ if (size) {
+ val |= F_RXCOALESCEENABLE;
+ if (psh)
+ val |= F_RXCOALESCEPSHEN;
+ t3_write_reg(adap, A_TP_PARA_REG2, V_RXCOALESCESIZE(size) |
+ V_MAXRXDATA(MAX_RX_COALESCING_LEN));
+ }
+ t3_write_reg(adap, A_TP_PARA_REG3, val);
+ return 0;
+}
+
+/**
+ * t3_tp_set_max_rxsize - set the max receive size
+ * @adap: the adapter
+ * @size: the max receive size
+ *
+ * Set TP's max receive size. This is the limit that applies when
+ * receive coalescing is disabled.
+ */
+void t3_tp_set_max_rxsize(struct adapter *adap, unsigned int size)
+{
+ t3_write_reg(adap, A_TP_PARA_REG7,
+ V_PMMAXXFERLEN0(size) | V_PMMAXXFERLEN1(size));
+}
+
+static void __devinit init_mtus(unsigned short mtus[])
+{
+ /*
+ * See draft-mathis-plpmtud-00.txt for the values. The min is 88 so
+ * it can accomodate max size TCP/IP headers when SACK and timestamps
+ * are enabled and still have at least 8 bytes of payload.
+ */
+ mtus[0] = 88;
+ mtus[1] = 256;
+ mtus[2] = 512;
+ mtus[3] = 576;
+ mtus[4] = 808;
+ mtus[5] = 1024;
+ mtus[6] = 1280;
+ mtus[7] = 1492;
+ mtus[8] = 1500;
+ mtus[9] = 2002;
+ mtus[10] = 2048;
+ mtus[11] = 4096;
+ mtus[12] = 4352;
+ mtus[13] = 8192;
+ mtus[14] = 9000;
+ mtus[15] = 9600;
+}
+
+/*
+ * Initial congestion control parameters.
+ */
+static void __devinit init_cong_ctrl(unsigned short *a, unsigned short *b)
+{
+ a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1;
+ a[9] = 2;
+ a[10] = 3;
+ a[11] = 4;
+ a[12] = 5;
+ a[13] = 6;
+ a[14] = 7;
+ a[15] = 8;
+ a[16] = 9;
+ a[17] = 10;
+ a[18] = 14;
+ a[19] = 17;
+ a[20] = 21;
+ a[21] = 25;
+ a[22] = 30;
+ a[23] = 35;
+ a[24] = 45;
+ a[25] = 60;
+ a[26] = 80;
+ a[27] = 100;
+ a[28] = 200;
+ a[29] = 300;
+ a[30] = 400;
+ a[31] = 500;
+
+ b[0] = b[1] = b[2] = b[3] = b[4] = b[5] = b[6] = b[7] = b[8] = 0;
+ b[9] = b[10] = 1;
+ b[11] = b[12] = 2;
+ b[13] = b[14] = b[15] = b[16] = 3;
+ b[17] = b[18] = b[19] = b[20] = b[21] = 4;
+ b[22] = b[23] = b[24] = b[25] = b[26] = b[27] = 5;
+ b[28] = b[29] = 6;
+ b[30] = b[31] = 7;
+}
+
+/* The minimum additive increment value for the congestion control table */
+#define CC_MIN_INCR 2U
+
+/**
+ * t3_load_mtus - write the MTU and congestion control HW tables
+ * @adap: the adapter
+ * @mtus: the unrestricted values for the MTU table
+ * @alphs: the values for the congestion control alpha parameter
+ * @beta: the values for the congestion control beta parameter
+ * @mtu_cap: the maximum permitted effective MTU
+ *
+ * Write the MTU table with the supplied MTUs capping each at &mtu_cap.
+ * Update the high-speed congestion control table with the supplied alpha,
+ * beta, and MTUs.
+ */
+void t3_load_mtus(struct adapter *adap, unsigned short mtus[NMTUS],
+ unsigned short alpha[NCCTRL_WIN],
+ unsigned short beta[NCCTRL_WIN], unsigned short mtu_cap)
+{
+ static const unsigned int avg_pkts[NCCTRL_WIN] = {
+ 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640,
+ 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480,
+ 28672, 40960, 57344, 81920, 114688, 163840, 229376
+ };
+
+ unsigned int i, w;
+
+ for (i = 0; i < NMTUS; ++i) {
+ unsigned int mtu = min(mtus[i], mtu_cap);
+ unsigned int log2 = fls(mtu);
+
+ if (!(mtu & ((1 << log2) >> 2))) /* round */
+ log2--;
+ t3_write_reg(adap, A_TP_MTU_TABLE,
+ (i << 24) | (log2 << 16) | mtu);
+
+ for (w = 0; w < NCCTRL_WIN; ++w) {
+ unsigned int inc;
+
+ inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w],
+ CC_MIN_INCR);
+
+ t3_write_reg(adap, A_TP_CCTRL_TABLE, (i << 21) |
+ (w << 16) | (beta[w] << 13) | inc);
+ }
+ }
+}
+
+/**
+ * t3_read_hw_mtus - returns the values in the HW MTU table
+ * @adap: the adapter
+ * @mtus: where to store the HW MTU values
+ *
+ * Reads the HW MTU table.
+ */
+void t3_read_hw_mtus(struct adapter *adap, unsigned short mtus[NMTUS])
+{
+ int i;
+
+ for (i = 0; i < NMTUS; ++i) {
+ unsigned int val;
+
+ t3_write_reg(adap, A_TP_MTU_TABLE, 0xff000000 | i);
+ val = t3_read_reg(adap, A_TP_MTU_TABLE);
+ mtus[i] = val & 0x3fff;
+ }
+}
+
+/**
+ * t3_get_cong_cntl_tab - reads the congestion control table
+ * @adap: the adapter
+ * @incr: where to store the alpha values
+ *
+ * Reads the additive increments programmed into the HW congestion
+ * control table.
+ */
+void t3_get_cong_cntl_tab(struct adapter *adap,
+ unsigned short incr[NMTUS][NCCTRL_WIN])
+{
+ unsigned int mtu, w;
+
+ for (mtu = 0; mtu < NMTUS; ++mtu)
+ for (w = 0; w < NCCTRL_WIN; ++w) {
+ t3_write_reg(adap, A_TP_CCTRL_TABLE,
+ 0xffff0000 | (mtu << 5) | w);
+ incr[mtu][w] = t3_read_reg(adap, A_TP_CCTRL_TABLE) &
+ 0x1fff;
+ }
+}
+
+/**
+ * t3_tp_get_mib_stats - read TP's MIB counters
+ * @adap: the adapter
+ * @tps: holds the returned counter values
+ *
+ * Returns the values of TP's MIB counters.
+ */
+void t3_tp_get_mib_stats(struct adapter *adap, struct tp_mib_stats *tps)
+{
+ t3_read_indirect(adap, A_TP_MIB_INDEX, A_TP_MIB_RDATA, (u32 *) tps,
+ sizeof(*tps) / sizeof(u32), 0);
+}
+
+#define ulp_region(adap, name, start, len) \
+ t3_write_reg((adap), A_ULPRX_ ## name ## _LLIMIT, (start)); \
+ t3_write_reg((adap), A_ULPRX_ ## name ## _ULIMIT, \
+ (start) + (len) - 1); \
+ start += len
+
+#define ulptx_region(adap, name, start, len) \
+ t3_write_reg((adap), A_ULPTX_ ## name ## _LLIMIT, (start)); \
+ t3_write_reg((adap), A_ULPTX_ ## name ## _ULIMIT, \
+ (start) + (len) - 1)
+
+static void ulp_config(struct adapter *adap, const struct tp_params *p)
+{
+ unsigned int m = p->chan_rx_size;
+
+ ulp_region(adap, ISCSI, m, p->chan_rx_size / 8);
+ ulp_region(adap, TDDP, m, p->chan_rx_size / 8);
+ ulptx_region(adap, TPT, m, p->chan_rx_size / 4);
+ ulp_region(adap, STAG, m, p->chan_rx_size / 4);
+ ulp_region(adap, RQ, m, p->chan_rx_size / 4);
+ ulptx_region(adap, PBL, m, p->chan_rx_size / 4);
+ ulp_region(adap, PBL, m, p->chan_rx_size / 4);
+ t3_write_reg(adap, A_ULPRX_TDDP_TAGMASK, 0xffffffff);
+}
+
+void t3_config_trace_filter(struct adapter *adapter,
+ const struct trace_params *tp, int filter_index,
+ int invert, int enable)
+{
+ u32 addr, key[4], mask[4];
+
+ key[0] = tp->sport | (tp->sip << 16);
+ key[1] = (tp->sip >> 16) | (tp->dport << 16);
+ key[2] = tp->dip;
+ key[3] = tp->proto | (tp->vlan << 8) | (tp->intf << 20);
+
+ mask[0] = tp->sport_mask | (tp->sip_mask << 16);
+ mask[1] = (tp->sip_mask >> 16) | (tp->dport_mask << 16);
+ mask[2] = tp->dip_mask;
+ mask[3] = tp->proto_mask | (tp->vlan_mask << 8) | (tp->intf_mask << 20);
+
+ if (invert)
+ key[3] |= (1 << 29);
+ if (enable)
+ key[3] |= (1 << 28);
+
+ addr = filter_index ? A_TP_RX_TRC_KEY0 : A_TP_TX_TRC_KEY0;
+ tp_wr_indirect(adapter, addr++, key[0]);
+ tp_wr_indirect(adapter, addr++, mask[0]);
+ tp_wr_indirect(adapter, addr++, key[1]);
+ tp_wr_indirect(adapter, addr++, mask[1]);
+ tp_wr_indirect(adapter, addr++, key[2]);
+ tp_wr_indirect(adapter, addr++, mask[2]);
+ tp_wr_indirect(adapter, addr++, key[3]);
+ tp_wr_indirect(adapter, addr, mask[3]);
+ t3_read_reg(adapter, A_TP_PIO_DATA);
+}
+
+/**
+ * t3_config_sched - configure a HW traffic scheduler
+ * @adap: the adapter
+ * @kbps: target rate in Kbps
+ * @sched: the scheduler index
+ *
+ * Configure a HW scheduler for the target rate
+ */
+int t3_config_sched(struct adapter *adap, unsigned int kbps, int sched)
+{
+ unsigned int v, tps, cpt, bpt, delta, mindelta = ~0;
+ unsigned int clk = adap->params.vpd.cclk * 1000;
+ unsigned int selected_cpt = 0, selected_bpt = 0;
+
+ if (kbps > 0) {
+ kbps *= 125; /* -> bytes */
+ for (cpt = 1; cpt <= 255; cpt++) {
+ tps = clk / cpt;
+ bpt = (kbps + tps / 2) / tps;
+ if (bpt > 0 && bpt <= 255) {
+ v = bpt * tps;
+ delta = v >= kbps ? v - kbps : kbps - v;
+ if (delta <= mindelta) {
+ mindelta = delta;
+ selected_cpt = cpt;
+ selected_bpt = bpt;
+ }
+ } else if (selected_cpt)
+ break;
+ }
+ if (!selected_cpt)
+ return -EINVAL;
+ }
+ t3_write_reg(adap, A_TP_TM_PIO_ADDR,
+ A_TP_TX_MOD_Q1_Q0_RATE_LIMIT - sched / 2);
+ v = t3_read_reg(adap, A_TP_TM_PIO_DATA);
+ if (sched & 1)
+ v = (v & 0xffff) | (selected_cpt << 16) | (selected_bpt << 24);
+ else
+ v = (v & 0xffff0000) | selected_cpt | (selected_bpt << 8);
+ t3_write_reg(adap, A_TP_TM_PIO_DATA, v);
+ return 0;
+}
+
+static int tp_init(struct adapter *adap, const struct tp_params *p)
+{
+ int busy = 0;
+
+ tp_config(adap, p);
+ t3_set_vlan_accel(adap, 3, 0);
+
+ if (is_offload(adap)) {
+ tp_set_timers(adap, adap->params.vpd.cclk * 1000);
+ t3_write_reg(adap, A_TP_RESET, F_FLSTINITENABLE);
+ busy = t3_wait_op_done(adap, A_TP_RESET, F_FLSTINITENABLE,
+ 0, 1000, 5);
+ if (busy)
+ CH_ERR(adap, "TP initialization timed out\n");
+ }
+
+ if (!busy)
+ t3_write_reg(adap, A_TP_RESET, F_TPRESET);
+ return busy;
+}
+
+int t3_mps_set_active_ports(struct adapter *adap, unsigned int port_mask)
+{
+ if (port_mask & ~((1 << adap->params.nports) - 1))
+ return -EINVAL;
+ t3_set_reg_field(adap, A_MPS_CFG, F_PORT1ACTIVE | F_PORT0ACTIVE,
+ port_mask << S_PORT0ACTIVE);
+ return 0;
+}
+
+/*
+ * Perform the bits of HW initialization that are dependent on the number
+ * of available ports.
+ */
+static void init_hw_for_avail_ports(struct adapter *adap, int nports)
+{
+ int i;
+
+ if (nports == 1) {
+ t3_set_reg_field(adap, A_ULPRX_CTL, F_ROUND_ROBIN, 0);
+ t3_set_reg_field(adap, A_ULPTX_CONFIG, F_CFG_RR_ARB, 0);
+ t3_write_reg(adap, A_MPS_CFG, F_TPRXPORTEN | F_TPTXPORT0EN |
+ F_PORT0ACTIVE | F_ENFORCEPKT);
+ t3_write_reg(adap, A_PM1_TX_CFG, 0xc000c000);
+ } else {
+ t3_set_reg_field(adap, A_ULPRX_CTL, 0, F_ROUND_ROBIN);
+ t3_set_reg_field(adap, A_ULPTX_CONFIG, 0, F_CFG_RR_ARB);
+ t3_write_reg(adap, A_ULPTX_DMA_WEIGHT,
+ V_D1_WEIGHT(16) | V_D0_WEIGHT(16));
+ t3_write_reg(adap, A_MPS_CFG, F_TPTXPORT0EN | F_TPTXPORT1EN |
+ F_TPRXPORTEN | F_PORT0ACTIVE | F_PORT1ACTIVE |
+ F_ENFORCEPKT);
+ t3_write_reg(adap, A_PM1_TX_CFG, 0x80008000);
+ t3_set_reg_field(adap, A_TP_PC_CONFIG, 0, F_TXTOSQUEUEMAPMODE);
+ t3_write_reg(adap, A_TP_TX_MOD_QUEUE_REQ_MAP,
+ V_TX_MOD_QUEUE_REQ_MAP(0xaa));
+ for (i = 0; i < 16; i++)
+ t3_write_reg(adap, A_TP_TX_MOD_QUE_TABLE,
+ (i << 16) | 0x1010);
+ }
+}
+
+static int calibrate_xgm(struct adapter *adapter)
+{
+ if (uses_xaui(adapter)) {
+ unsigned int v, i;
+
+ for (i = 0; i < 5; ++i) {
+ t3_write_reg(adapter, A_XGM_XAUI_IMP, 0);
+ t3_read_reg(adapter, A_XGM_XAUI_IMP);
+ msleep(1);
+ v = t3_read_reg(adapter, A_XGM_XAUI_IMP);
+ if (!(v & (F_XGM_CALFAULT | F_CALBUSY))) {
+ t3_write_reg(adapter, A_XGM_XAUI_IMP,
+ V_XAUIIMP(G_CALIMP(v) >> 2));
+ return 0;
+ }
+ }
+ CH_ERR(adapter, "MAC calibration failed\n");
+ return -1;
+ } else {
+ t3_write_reg(adapter, A_XGM_RGMII_IMP,
+ V_RGMIIIMPPD(2) | V_RGMIIIMPPU(3));
+ t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_XGM_IMPSETUPDATE,
+ F_XGM_IMPSETUPDATE);
+ }
+ return 0;
+}
+
+static void calibrate_xgm_t3b(struct adapter *adapter)
+{
+ if (!uses_xaui(adapter)) {
+ t3_write_reg(adapter, A_XGM_RGMII_IMP, F_CALRESET |
+ F_CALUPDATE | V_RGMIIIMPPD(2) | V_RGMIIIMPPU(3));
+ t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_CALRESET, 0);
+ t3_set_reg_field(adapter, A_XGM_RGMII_IMP, 0,
+ F_XGM_IMPSETUPDATE);
+ t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_XGM_IMPSETUPDATE,
+ 0);
+ t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_CALUPDATE, 0);
+ t3_set_reg_field(adapter, A_XGM_RGMII_IMP, 0, F_CALUPDATE);
+ }
+}
+
+struct mc7_timing_params {
+ unsigned char ActToPreDly;
+ unsigned char ActToRdWrDly;
+ unsigned char PreCyc;
+ unsigned char RefCyc[5];
+ unsigned char BkCyc;
+ unsigned char WrToRdDly;
+ unsigned char RdToWrDly;
+};
+
+/*
+ * Write a value to a register and check that the write completed. These
+ * writes normally complete in a cycle or two, so one read should suffice.
+ * The very first read exists to flush the posted write to the device.
+ */
+static int wrreg_wait(struct adapter *adapter, unsigned int addr, u32 val)
+{
+ t3_write_reg(adapter, addr, val);
+ t3_read_reg(adapter, addr); /* flush */
+ if (!(t3_read_reg(adapter, addr) & F_BUSY))
+ return 0;
+ CH_ERR(adapter, "write to MC7 register 0x%x timed out\n", addr);
+ return -EIO;
+}
+
+static int mc7_init(struct mc7 *mc7, unsigned int mc7_clock, int mem_type)
+{
+ static const unsigned int mc7_mode[] = {
+ 0x632, 0x642, 0x652, 0x432, 0x442
+ };
+ static const struct mc7_timing_params mc7_timings[] = {
+ {12, 3, 4, {20, 28, 34, 52, 0}, 15, 6, 4},
+ {12, 4, 5, {20, 28, 34, 52, 0}, 16, 7, 4},
+ {12, 5, 6, {20, 28, 34, 52, 0}, 17, 8, 4},
+ {9, 3, 4, {15, 21, 26, 39, 0}, 12, 6, 4},
+ {9, 4, 5, {15, 21, 26, 39, 0}, 13, 7, 4}
+ };
+
+ u32 val;
+ unsigned int width, density, slow, attempts;
+ struct adapter *adapter = mc7->adapter;
+ const struct mc7_timing_params *p = &mc7_timings[mem_type];
+
+ val = t3_read_reg(adapter, mc7->offset + A_MC7_CFG);
+ slow = val & F_SLOW;
+ width = G_WIDTH(val);
+ density = G_DEN(val);
+
+ t3_write_reg(adapter, mc7->offset + A_MC7_CFG, val | F_IFEN);
+ val = t3_read_reg(adapter, mc7->offset + A_MC7_CFG); /* flush */
+ msleep(1);
+
+ if (!slow) {
+ t3_write_reg(adapter, mc7->offset + A_MC7_CAL, F_SGL_CAL_EN);
+ t3_read_reg(adapter, mc7->offset + A_MC7_CAL);
+ msleep(1);
+ if (t3_read_reg(adapter, mc7->offset + A_MC7_CAL) &
+ (F_BUSY | F_SGL_CAL_EN | F_CAL_FAULT)) {
+ CH_ERR(adapter, "%s MC7 calibration timed out\n",
+ mc7->name);
+ goto out_fail;
+ }
+ }
+
+ t3_write_reg(adapter, mc7->offset + A_MC7_PARM,
+ V_ACTTOPREDLY(p->ActToPreDly) |
+ V_ACTTORDWRDLY(p->ActToRdWrDly) | V_PRECYC(p->PreCyc) |
+ V_REFCYC(p->RefCyc[density]) | V_BKCYC(p->BkCyc) |
+ V_WRTORDDLY(p->WrToRdDly) | V_RDTOWRDLY(p->RdToWrDly));
+
+ t3_write_reg(adapter, mc7->offset + A_MC7_CFG,
+ val | F_CLKEN | F_TERM150);
+ t3_read_reg(adapter, mc7->offset + A_MC7_CFG); /* flush */
+
+ if (!slow)
+ t3_set_reg_field(adapter, mc7->offset + A_MC7_DLL, F_DLLENB,
+ F_DLLENB);
+ udelay(1);
+
+ val = slow ? 3 : 6;
+ if (wrreg_wait(adapter, mc7->offset + A_MC7_PRE, 0) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE2, 0) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE3, 0) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE1, val))
+ goto out_fail;
+
+ if (!slow) {
+ t3_write_reg(adapter, mc7->offset + A_MC7_MODE, 0x100);
+ t3_set_reg_field(adapter, mc7->offset + A_MC7_DLL, F_DLLRST, 0);
+ udelay(5);
+ }
+
+ if (wrreg_wait(adapter, mc7->offset + A_MC7_PRE, 0) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_REF, 0) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_REF, 0) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_MODE,
+ mc7_mode[mem_type]) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE1, val | 0x380) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE1, val))
+ goto out_fail;
+
+ /* clock value is in KHz */
+ mc7_clock = mc7_clock * 7812 + mc7_clock / 2; /* ns */
+ mc7_clock /= 1000000; /* KHz->MHz, ns->us */
+
+ t3_write_reg(adapter, mc7->offset + A_MC7_REF,
+ F_PERREFEN | V_PREREFDIV(mc7_clock));
+ t3_read_reg(adapter, mc7->offset + A_MC7_REF); /* flush */
+
+ t3_write_reg(adapter, mc7->offset + A_MC7_ECC, F_ECCGENEN | F_ECCCHKEN);
+ t3_write_reg(adapter, mc7->offset + A_MC7_BIST_DATA, 0);
+ t3_write_reg(adapter, mc7->offset + A_MC7_BIST_ADDR_BEG, 0);
+ t3_write_reg(adapter, mc7->offset + A_MC7_BIST_ADDR_END,
+ (mc7->size << width) - 1);
+ t3_write_reg(adapter, mc7->offset + A_MC7_BIST_OP, V_OP(1));
+ t3_read_reg(adapter, mc7->offset + A_MC7_BIST_OP); /* flush */
+
+ attempts = 50;
+ do {
+ msleep(250);
+ val = t3_read_reg(adapter, mc7->offset + A_MC7_BIST_OP);
+ } while ((val & F_BUSY) && --attempts);
+ if (val & F_BUSY) {
+ CH_ERR(adapter, "%s MC7 BIST timed out\n", mc7->name);
+ goto out_fail;
+ }
+
+ /* Enable normal memory accesses. */
+ t3_set_reg_field(adapter, mc7->offset + A_MC7_CFG, 0, F_RDY);
+ return 0;
+
+out_fail:
+ return -1;
+}
+
+static void config_pcie(struct adapter *adap)
+{
+ static const u16 ack_lat[4][6] = {
+ {237, 416, 559, 1071, 2095, 4143},
+ {128, 217, 289, 545, 1057, 2081},
+ {73, 118, 154, 282, 538, 1050},
+ {67, 107, 86, 150, 278, 534}
+ };
+ static const u16 rpl_tmr[4][6] = {
+ {711, 1248, 1677, 3213, 6285, 12429},
+ {384, 651, 867, 1635, 3171, 6243},
+ {219, 354, 462, 846, 1614, 3150},
+ {201, 321, 258, 450, 834, 1602}
+ };
+
+ u16 val;
+ unsigned int log2_width, pldsize;
+ unsigned int fst_trn_rx, fst_trn_tx, acklat, rpllmt;
+
+ pci_read_config_word(adap->pdev,
+ adap->params.pci.pcie_cap_addr + PCI_EXP_DEVCTL,
+ &val);
+ pldsize = (val & PCI_EXP_DEVCTL_PAYLOAD) >> 5;
+ pci_read_config_word(adap->pdev,
+ adap->params.pci.pcie_cap_addr + PCI_EXP_LNKCTL,
+ &val);
+
+ fst_trn_tx = G_NUMFSTTRNSEQ(t3_read_reg(adap, A_PCIE_PEX_CTRL0));
+ fst_trn_rx = adap->params.rev == 0 ? fst_trn_tx :
+ G_NUMFSTTRNSEQRX(t3_read_reg(adap, A_PCIE_MODE));
+ log2_width = fls(adap->params.pci.width) - 1;
+ acklat = ack_lat[log2_width][pldsize];
+ if (val & 1) /* check LOsEnable */
+ acklat += fst_trn_tx * 4;
+ rpllmt = rpl_tmr[log2_width][pldsize] + fst_trn_rx * 4;
+
+ if (adap->params.rev == 0)
+ t3_set_reg_field(adap, A_PCIE_PEX_CTRL1,
+ V_T3A_ACKLAT(M_T3A_ACKLAT),
+ V_T3A_ACKLAT(acklat));
+ else
+ t3_set_reg_field(adap, A_PCIE_PEX_CTRL1, V_ACKLAT(M_ACKLAT),
+ V_ACKLAT(acklat));
+
+ t3_set_reg_field(adap, A_PCIE_PEX_CTRL0, V_REPLAYLMT(M_REPLAYLMT),
+ V_REPLAYLMT(rpllmt));
+
+ t3_write_reg(adap, A_PCIE_PEX_ERR, 0xffffffff);
+ t3_set_reg_field(adap, A_PCIE_CFG, F_PCIE_CLIDECEN, F_PCIE_CLIDECEN);
+}
+
+/*
+ * Initialize and configure T3 HW modules. This performs the
+ * initialization steps that need to be done once after a card is reset.
+ * MAC and PHY initialization is handled separarely whenever a port is enabled.
+ *
+ * fw_params are passed to FW and their value is platform dependent. Only the
+ * top 8 bits are available for use, the rest must be 0.
+ */
+int t3_init_hw(struct adapter *adapter, u32 fw_params)
+{
+ int err = -EIO, attempts = 100;
+ const struct vpd_params *vpd = &adapter->params.vpd;
+
+ if (adapter->params.rev > 0)
+ calibrate_xgm_t3b(adapter);
+ else if (calibrate_xgm(adapter))
+ goto out_err;
+
+ if (vpd->mclk) {
+ partition_mem(adapter, &adapter->params.tp);
+
+ if (mc7_init(&adapter->pmrx, vpd->mclk, vpd->mem_timing) ||
+ mc7_init(&adapter->pmtx, vpd->mclk, vpd->mem_timing) ||
+ mc7_init(&adapter->cm, vpd->mclk, vpd->mem_timing) ||
+ t3_mc5_init(&adapter->mc5, adapter->params.mc5.nservers,
+ adapter->params.mc5.nfilters,
+ adapter->params.mc5.nroutes))
+ goto out_err;
+ }
+
+ if (tp_init(adapter, &adapter->params.tp))
+ goto out_err;
+
+ t3_tp_set_coalescing_size(adapter,
+ min(adapter->params.sge.max_pkt_size,
+ MAX_RX_COALESCING_LEN), 1);
+ t3_tp_set_max_rxsize(adapter,
+ min(adapter->params.sge.max_pkt_size, 16384U));
+ ulp_config(adapter, &adapter->params.tp);
+
+ if (is_pcie(adapter))
+ config_pcie(adapter);
+ else
+ t3_set_reg_field(adapter, A_PCIX_CFG, 0, F_CLIDECEN);
+
+ t3_write_reg(adapter, A_PM1_RX_CFG, 0xf000f000);
+ init_hw_for_avail_ports(adapter, adapter->params.nports);
+ t3_sge_init(adapter, &adapter->params.sge);
+
+ t3_write_reg(adapter, A_CIM_HOST_ACC_DATA, vpd->uclk | fw_params);
+ t3_write_reg(adapter, A_CIM_BOOT_CFG,
+ V_BOOTADDR(FW_FLASH_BOOT_ADDR >> 2));
+ t3_read_reg(adapter, A_CIM_BOOT_CFG); /* flush */
+
+ do { /* wait for uP to initialize */
+ msleep(20);
+ } while (t3_read_reg(adapter, A_CIM_HOST_ACC_DATA) && --attempts);
+ if (!attempts)
+ goto out_err;
+
+ err = 0;
+out_err:
+ return err;
+}
+
+/**
+ * get_pci_mode - determine a card's PCI mode
+ * @adapter: the adapter
+ * @p: where to store the PCI settings
+ *
+ * Determines a card's PCI mode and associated parameters, such as speed
+ * and width.
+ */
+static void __devinit get_pci_mode(struct adapter *adapter,
+ struct pci_params *p)
+{
+ static unsigned short speed_map[] = { 33, 66, 100, 133 };
+ u32 pci_mode, pcie_cap;
+
+ pcie_cap = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
+ if (pcie_cap) {
+ u16 val;
+
+ p->variant = PCI_VARIANT_PCIE;
+ p->pcie_cap_addr = pcie_cap;
+ pci_read_config_word(adapter->pdev, pcie_cap + PCI_EXP_LNKSTA,
+ &val);
+ p->width = (val >> 4) & 0x3f;
+ return;
+ }
+
+ pci_mode = t3_read_reg(adapter, A_PCIX_MODE);
+ p->speed = speed_map[G_PCLKRANGE(pci_mode)];
+ p->width = (pci_mode & F_64BIT) ? 64 : 32;
+ pci_mode = G_PCIXINITPAT(pci_mode);
+ if (pci_mode == 0)
+ p->variant = PCI_VARIANT_PCI;
+ else if (pci_mode < 4)
+ p->variant = PCI_VARIANT_PCIX_MODE1_PARITY;
+ else if (pci_mode < 8)
+ p->variant = PCI_VARIANT_PCIX_MODE1_ECC;
+ else
+ p->variant = PCI_VARIANT_PCIX_266_MODE2;
+}
+
+/**
+ * init_link_config - initialize a link's SW state
+ * @lc: structure holding the link state
+ * @ai: information about the current card
+ *
+ * Initializes the SW state maintained for each link, including the link's
+ * capabilities and default speed/duplex/flow-control/autonegotiation
+ * settings.
+ */
+static void __devinit init_link_config(struct link_config *lc,
+ unsigned int caps)
+{
+ lc->supported = caps;
+ lc->requested_speed = lc->speed = SPEED_INVALID;
+ lc->requested_duplex = lc->duplex = DUPLEX_INVALID;
+ lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
+ if (lc->supported & SUPPORTED_Autoneg) {
+ lc->advertising = lc->supported;
+ lc->autoneg = AUTONEG_ENABLE;
+ lc->requested_fc |= PAUSE_AUTONEG;
+ } else {
+ lc->advertising = 0;
+ lc->autoneg = AUTONEG_DISABLE;
+ }
+}
+
+/**
+ * mc7_calc_size - calculate MC7 memory size
+ * @cfg: the MC7 configuration
+ *
+ * Calculates the size of an MC7 memory in bytes from the value of its
+ * configuration register.
+ */
+static unsigned int __devinit mc7_calc_size(u32 cfg)
+{
+ unsigned int width = G_WIDTH(cfg);
+ unsigned int banks = !!(cfg & F_BKS) + 1;
+ unsigned int org = !!(cfg & F_ORG) + 1;
+ unsigned int density = G_DEN(cfg);
+ unsigned int MBs = ((256 << density) * banks) / (org << width);
+
+ return MBs << 20;
+}
+
+static void __devinit mc7_prep(struct adapter *adapter, struct mc7 *mc7,
+ unsigned int base_addr, const char *name)
+{
+ u32 cfg;
+
+ mc7->adapter = adapter;
+ mc7->name = name;
+ mc7->offset = base_addr - MC7_PMRX_BASE_ADDR;
+ cfg = t3_read_reg(adapter, mc7->offset + A_MC7_CFG);
+ mc7->size = mc7_calc_size(cfg);
+ mc7->width = G_WIDTH(cfg);
+}
+
+void mac_prep(struct cmac *mac, struct adapter *adapter, int index)
+{
+ mac->adapter = adapter;
+ mac->offset = (XGMAC0_1_BASE_ADDR - XGMAC0_0_BASE_ADDR) * index;
+ mac->nucast = 1;
+
+ if (adapter->params.rev == 0 && uses_xaui(adapter)) {
+ t3_write_reg(adapter, A_XGM_SERDES_CTRL + mac->offset,
+ is_10G(adapter) ? 0x2901c04 : 0x2301c04);
+ t3_set_reg_field(adapter, A_XGM_PORT_CFG + mac->offset,
+ F_ENRGMII, 0);
+ }
+}
+
+void early_hw_init(struct adapter *adapter, const struct adapter_info *ai)
+{
+ u32 val = V_PORTSPEED(is_10G(adapter) ? 3 : 2);
+
+ mi1_init(adapter, ai);
+ t3_write_reg(adapter, A_I2C_CFG, /* set for 80KHz */
+ V_I2C_CLKDIV(adapter->params.vpd.cclk / 80 - 1));
+ t3_write_reg(adapter, A_T3DBG_GPIO_EN,
+ ai->gpio_out | F_GPIO0_OEN | F_GPIO0_OUT_VAL);
+
+ if (adapter->params.rev == 0 || !uses_xaui(adapter))
+ val |= F_ENRGMII;
+
+ /* Enable MAC clocks so we can access the registers */
+ t3_write_reg(adapter, A_XGM_PORT_CFG, val);
+ t3_read_reg(adapter, A_XGM_PORT_CFG);
+
+ val |= F_CLKDIVRESET_;
+ t3_write_reg(adapter, A_XGM_PORT_CFG, val);
+ t3_read_reg(adapter, A_XGM_PORT_CFG);
+ t3_write_reg(adapter, XGM_REG(A_XGM_PORT_CFG, 1), val);
+ t3_read_reg(adapter, A_XGM_PORT_CFG);
+}
+
+/*
+ * Reset the adapter. PCIe cards lose their config space during reset, PCI-X
+ * ones don't.
+ */
+int t3_reset_adapter(struct adapter *adapter)
+{
+ int i;
+ uint16_t devid = 0;
+
+ if (is_pcie(adapter))
+ pci_save_state(adapter->pdev);
+ t3_write_reg(adapter, A_PL_RST, F_CRSTWRM | F_CRSTWRMMODE);
+
+ /*
+ * Delay. Give Some time to device to reset fully.
+ * XXX The delay time should be modified.
+ */
+ for (i = 0; i < 10; i++) {
+ msleep(50);
+ pci_read_config_word(adapter->pdev, 0x00, &devid);
+ if (devid == 0x1425)
+ break;
+ }
+
+ if (devid != 0x1425)
+ return -1;
+
+ if (is_pcie(adapter))
+ pci_restore_state(adapter->pdev);
+ return 0;
+}
+
+/*
+ * Initialize adapter SW state for the various HW modules, set initial values
+ * for some adapter tunables, take PHYs out of reset, and initialize the MDIO
+ * interface.
+ */
+int __devinit t3_prep_adapter(struct adapter *adapter,
+ const struct adapter_info *ai, int reset)
+{
+ int ret;
+ unsigned int i, j = 0;
+
+ get_pci_mode(adapter, &adapter->params.pci);
+
+ adapter->params.info = ai;
+ adapter->params.nports = ai->nports;
+ adapter->params.rev = t3_read_reg(adapter, A_PL_REV);
+ adapter->params.linkpoll_period = 0;
+ adapter->params.stats_update_period = is_10G(adapter) ?
+ MAC_STATS_ACCUM_SECS : (MAC_STATS_ACCUM_SECS * 10);
+ adapter->params.pci.vpd_cap_addr =
+ pci_find_capability(adapter->pdev, PCI_CAP_ID_VPD);
+ ret = get_vpd_params(adapter, &adapter->params.vpd);
+ if (ret < 0)
+ return ret;
+
+ if (reset && t3_reset_adapter(adapter))
+ return -1;
+
+ t3_sge_prep(adapter, &adapter->params.sge);
+
+ if (adapter->params.vpd.mclk) {
+ struct tp_params *p = &adapter->params.tp;
+
+ mc7_prep(adapter, &adapter->pmrx, MC7_PMRX_BASE_ADDR, "PMRX");
+ mc7_prep(adapter, &adapter->pmtx, MC7_PMTX_BASE_ADDR, "PMTX");
+ mc7_prep(adapter, &adapter->cm, MC7_CM_BASE_ADDR, "CM");
+
+ p->nchan = ai->nports;
+ p->pmrx_size = t3_mc7_size(&adapter->pmrx);
+ p->pmtx_size = t3_mc7_size(&adapter->pmtx);
+ p->cm_size = t3_mc7_size(&adapter->cm);
+ p->chan_rx_size = p->pmrx_size / 2; /* only 1 Rx channel */
+ p->chan_tx_size = p->pmtx_size / p->nchan;
+ p->rx_pg_size = 64 * 1024;
+ p->tx_pg_size = is_10G(adapter) ? 64 * 1024 : 16 * 1024;
+ p->rx_num_pgs = pm_num_pages(p->chan_rx_size, p->rx_pg_size);
+ p->tx_num_pgs = pm_num_pages(p->chan_tx_size, p->tx_pg_size);
+ p->ntimer_qs = p->cm_size >= (128 << 20) ||
+ adapter->params.rev > 0 ? 12 : 6;
+
+ adapter->params.mc5.nservers = DEFAULT_NSERVERS;
+ adapter->params.mc5.nfilters = adapter->params.rev > 0 ?
+ DEFAULT_NFILTERS : 0;
+ adapter->params.mc5.nroutes = 0;
+ t3_mc5_prep(adapter, &adapter->mc5, MC5_MODE_144_BIT);
+
+ init_mtus(adapter->params.mtus);
+ init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd);
+ }
+
+ early_hw_init(adapter, ai);
+
+ for_each_port(adapter, i) {
+ u8 hw_addr[6];
+ struct port_info *p = adap2pinfo(adapter, i);
+
+ while (!adapter->params.vpd.port_type[j])
+ ++j;
+
+ p->port_type = &port_types[adapter->params.vpd.port_type[j]];
+ p->port_type->phy_prep(&p->phy, adapter, ai->phy_base_addr + j,
+ ai->mdio_ops);
+ mac_prep(&p->mac, adapter, j);
+ ++j;
+
+ /*
+ * The VPD EEPROM stores the base Ethernet address for the
+ * card. A port's address is derived from the base by adding
+ * the port's index to the base's low octet.
+ */
+ memcpy(hw_addr, adapter->params.vpd.eth_base, 5);
+ hw_addr[5] = adapter->params.vpd.eth_base[5] + i;
+
+ memcpy(adapter->port[i]->dev_addr, hw_addr,
+ ETH_ALEN);
+ memcpy(adapter->port[i]->perm_addr, hw_addr,
+ ETH_ALEN);
+ init_link_config(&p->link_config, p->port_type->caps);
+ p->phy.ops->power_down(&p->phy, 1);
+ if (!(p->port_type->caps & SUPPORTED_IRQ))
+ adapter->params.linkpoll_period = 10;
+ }
+
+ return 0;
+}
+
+void t3_led_ready(struct adapter *adapter)
+{
+ t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL,
+ F_GPIO0_OUT_VAL);
+}