diff options
| author | Bruce Allan <bruce.w.allan@intel.com> | 2008-04-29 09:16:05 -0700 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@redhat.com> | 2008-05-06 12:04:14 -0400 |
| commit | 97ac8caee238d2a81c23661916f7acd3a22c85fe (patch) | |
| tree | 52723d8582162e862c78fecb5da2d4d13f7a9579 /drivers/net/e1000e/e1000.h | |
| parent | e284e5c6601cbb16e48854be26aa57a8fa844e35 (diff) | |
e1000e: Add support for BM PHYs on ICH9
This patch adds support for the BM PHY, a new PHY model being used
on ICH9-based implementations.
This new PHY exposes issues in the ICH9 silicon when receiving
jumbo frames large enough to use more than a certain part of the
Rx FIFO, and this unfortunately breaks packet split jumbo receives.
For this reason we re-introduce (for affected adapters only) the
jumbo single-skb receive routine back so that people who do
wish to use jumbo frames on these ich9 platforms can do so.
Part of this problem has to do with CPU sleep states and to make
sure that all the wake up timings are correctly we force them
with the recently merged pm_qos infrastructure written by Mark
Gross. (See http://lkml.org/lkml/2007/10/4/400).
To make code read a bit easier we introduce a _IS_ICH flag so
that we don't need to do mac type checks over the code.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/net/e1000e/e1000.h')
| -rw-r--r-- | drivers/net/e1000e/e1000.h | 7 |
1 files changed, 6 insertions, 1 deletions
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 38bfd0d261f..d3bc6f8101f 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -127,7 +127,7 @@ struct e1000_buffer { /* arrays of page information for packet split */ struct e1000_ps_page *ps_pages; }; - + struct page *page; }; struct e1000_ring { @@ -304,6 +304,7 @@ struct e1000_info { #define FLAG_HAS_CTRLEXT_ON_LOAD (1 << 5) #define FLAG_HAS_SWSM_ON_LOAD (1 << 6) #define FLAG_HAS_JUMBO_FRAMES (1 << 7) +#define FLAG_IS_ICH (1 << 9) #define FLAG_HAS_SMART_POWER_DOWN (1 << 11) #define FLAG_IS_QUAD_PORT_A (1 << 12) #define FLAG_IS_QUAD_PORT (1 << 13) @@ -386,6 +387,7 @@ extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, bool state); extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw); extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw); +extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw); extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw); extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw); @@ -443,6 +445,9 @@ extern s32 e1000e_get_phy_info_m88(struct e1000_hw *hw); extern s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data); extern s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data); extern enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id); +extern s32 e1000e_determine_phy_address(struct e1000_hw *hw); +extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data); +extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data); extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl); extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); |