aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ibm_emac/Kconfig
diff options
context:
space:
mode:
authorDavid Gibson <david@gibson.dropbear.id.au>2007-08-23 13:56:01 +1000
committerDavid S. Miller <davem@sunset.davemloft.net>2007-10-10 16:51:52 -0700
commit1d3bb996481e116f5f2b127cbd29b83365d2cf62 (patch)
treeb612a1dbf51c920fb5a9758a6d35f9ed37eb927f /drivers/net/ibm_emac/Kconfig
parent03233b90b0977d577322a6e1ddd56d9cc570d406 (diff)
Device tree aware EMAC driver
Based on BenH's earlier work, this is a new version of the EMAC driver for the built-in ethernet found on PowerPC 4xx embedded CPUs. The same ASIC is also found in the Axon bridge chip. This new version is designed to work in the arch/powerpc tree, using the device tree to probe the device, rather than the old and ugly arch/ppc OCP layer. This driver is designed to sit alongside the old driver (that lies in drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The old driver is left in place to support arch/ppc until arch/ppc itself reaches its final demise (not too long now, with luck). This driver still has a number of things that could do with cleaning up, but I think they can be fixed up after merging. Specifically: - Should be adjusted to properly use the dma mapping API. Axon needs this. - Probe logic needs reworking, in conjuction with the general probing code for of_platform devices. The dependencies here between EMAC, MAL, ZMII etc. make this complicated. At present, it usually works, because we initialize and register the sub-drivers before the EMAC driver itself, and (being in driver code) runs after the devices themselves have been instantiated from the device tree. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/ibm_emac/Kconfig')
-rw-r--r--drivers/net/ibm_emac/Kconfig70
1 files changed, 70 insertions, 0 deletions
diff --git a/drivers/net/ibm_emac/Kconfig b/drivers/net/ibm_emac/Kconfig
new file mode 100644
index 00000000000..f61c48047dc
--- /dev/null
+++ b/drivers/net/ibm_emac/Kconfig
@@ -0,0 +1,70 @@
+config IBM_EMAC
+ tristate "PowerPC 4xx on-chip Ethernet support"
+ depends on 4xx && !PPC_MERGE
+ help
+ This driver supports the PowerPC 4xx EMAC family of on-chip
+ Ethernet controllers.
+
+config IBM_EMAC_RXB
+ int "Number of receive buffers"
+ depends on IBM_EMAC
+ default "128"
+
+config IBM_EMAC_TXB
+ int "Number of transmit buffers"
+ depends on IBM_EMAC
+ default "64"
+
+config IBM_EMAC_POLL_WEIGHT
+ int "MAL NAPI polling weight"
+ depends on IBM_EMAC
+ default "32"
+
+config IBM_EMAC_RX_COPY_THRESHOLD
+ int "RX skb copy threshold (bytes)"
+ depends on IBM_EMAC
+ default "256"
+
+config IBM_EMAC_RX_SKB_HEADROOM
+ int "Additional RX skb headroom (bytes)"
+ depends on IBM_EMAC
+ default "0"
+ help
+ Additional receive skb headroom. Note, that driver
+ will always reserve at least 2 bytes to make IP header
+ aligned, so usually there is no need to add any additional
+ headroom.
+
+ If unsure, set to 0.
+
+config IBM_EMAC_PHY_RX_CLK_FIX
+ bool "PHY Rx clock workaround"
+ depends on IBM_EMAC && (405EP || 440GX || 440EP || 440GR)
+ help
+ Enable this if EMAC attached to a PHY which doesn't generate
+ RX clock if there is no link, if this is the case, you will
+ see "TX disable timeout" or "RX disable timeout" in the system
+ log.
+
+ If unsure, say N.
+
+config IBM_EMAC_DEBUG
+ bool "Debugging"
+ depends on IBM_EMAC
+ default n
+
+config IBM_EMAC_ZMII
+ bool
+ depends on IBM_EMAC && (NP405H || NP405L || 44x)
+ default y
+
+config IBM_EMAC_RGMII
+ bool
+ depends on IBM_EMAC && 440GX
+ default y
+
+config IBM_EMAC_TAH
+ bool
+ depends on IBM_EMAC && 440GX
+ default y
+