Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 404 insertions, 0 deletions

diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
new file mode 100644
index 00000000000..a464841da49
--- /dev/null
+++ b/drivers/net/irda/Kconfig
@@ -0,0 +1,404 @@
+
+menu "Infrared-port device drivers"
+	depends on IRDA!=n
+
+comment "SIR device drivers"
+
+config IRTTY_SIR
+	tristate "IrTTY (uses Linux serial driver)"
+	depends on IRDA
+	help
+	  Say Y here if you want to build support for the IrTTY line
+	  discipline.  To compile it as a module, choose M here: the module
+	  will be called irtty-sir. IrTTY makes it possible to use Linux's
+	  own serial driver for all IrDA ports that are 16550 compatible.
+	  Most IrDA chips are 16550 compatible so you should probably say Y
+	  to this option.  Using IrTTY will however limit the speed of the
+	  connection to 115200 bps (IrDA SIR mode).
+
+	  If unsure, say Y.
+
+comment "Dongle support"
+
+config DONGLE
+	bool "Serial dongle support"
+	depends on IRTTY_SIR
+	help
+	  Say Y here if you have an infrared device that connects to your
+	  computer's serial port. These devices are called dongles. Then say Y
+	  or M to the driver for your particular dongle below.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about serial dongles.
+
+config ESI_DONGLE
+	tristate "ESI JetEye PC dongle"
+	depends on DONGLE && IRDA
+	help
+	  Say Y here if you want to build support for the Extended Systems
+	  JetEye PC dongle.  To compile it as a module, choose M here. The ESI
+	  dongle attaches to the normal 9-pin serial port connector, and can
+	  currently only be used by IrTTY.  To activate support for ESI
+	  dongles you will have to start irattach like this:
+	  "irattach -d esi".
+
+config ACTISYS_DONGLE
+	tristate "ACTiSYS IR-220L and IR220L+ dongle"
+	depends on DONGLE && IRDA
+	help
+	  Say Y here if you want to build support for the ACTiSYS IR-220L and
+	  IR220L+ dongles.  To compile it as a module, choose M here. The
+	  ACTiSYS dongles attaches to the normal 9-pin serial port connector,
+	  and can currently only be used by IrTTY.  To activate support for
+	  ACTiSYS dongles you will have to start irattach like this:
+	  "irattach -d actisys" or "irattach -d actisys+".
+
+config TEKRAM_DONGLE
+	tristate "Tekram IrMate 210B dongle"
+	depends on DONGLE && IRDA
+	help
+	  Say Y here if you want to build support for the Tekram IrMate 210B
+	  dongle.  To compile it as a module, choose M here. The Tekram dongle
+	  attaches to the normal 9-pin serial port connector, and can
+	  currently only be used by IrTTY.  To activate support for Tekram
+	  dongles you will have to start irattach like this:
+	  "irattach -d tekram".
+
+config LITELINK_DONGLE
+	tristate "Parallax LiteLink dongle"
+	depends on DONGLE && IRDA
+	help
+	  Say Y here if you want to build support for the Parallax Litelink
+	  dongle.  To compile it as a module, choose M here.  The Parallax
+	  dongle attaches to the normal 9-pin serial port connector, and can
+	  currently only be used by IrTTY.  To activate support for Parallax
+	  dongles you will have to start irattach like this:
+	  "irattach -d litelink".
+
+config MA600_DONGLE
+	tristate "Mobile Action MA600 dongle"
+	depends on DONGLE && IRDA && EXPERIMENTAL
+	help
+	  Say Y here if you want to build support for the Mobile Action MA600
+	  dongle.  To compile it as a module, choose M here. The MA600 dongle
+	  attaches to the normal 9-pin serial port connector, and can
+	  currently only be used by IrTTY.  The driver should also support
+	  the MA620 USB version of the dongle, if the integrated USB-to-RS232
+	  converter is supported by usbserial. To activate support for
+	  MA600 dongle you will have to start irattach like this:
+	  "irattach -d ma600".
+
+config GIRBIL_DONGLE
+	tristate "Greenwich GIrBIL dongle"
+	depends on DONGLE && IRDA && EXPERIMENTAL
+	help
+	  Say Y here if you want to build support for the Greenwich GIrBIL
+	  dongle.  If you want to compile it as a module, choose M here.
+	  The Greenwich dongle attaches to the normal 9-pin serial port
+	  connector, and can currently only be used by IrTTY.  To activate
+	  support for Greenwich dongles you will have to start irattach
+	  like this: "irattach -d girbil".
+
+config MCP2120_DONGLE
+	tristate "Microchip MCP2120"
+	depends on DONGLE && IRDA && EXPERIMENTAL
+	help
+	  Say Y here if you want to build support for the Microchip MCP2120
+	  dongle.  If you want to compile it as a module, choose M here.
+	  The MCP2120 dongle attaches to the normal 9-pin serial port
+	  connector, and can currently only be used by IrTTY.  To activate
+	  support for MCP2120 dongles you will have to start irattach
+	  like this: "irattach -d mcp2120".
+
+	  You must build this dongle yourself.  For more information see:
+	  <http://www.eyetap.org/~tangf/irda_sir_linux.html>
+
+config OLD_BELKIN_DONGLE
+	tristate "Old Belkin dongle"
+	depends on DONGLE && IRDA && EXPERIMENTAL
+	help
+	  Say Y here if you want to build support for the Adaptec Airport 1000
+	  and 2000 dongles.  If you want to compile it as a module, choose
+	  M here. Some information is contained in the comments
+	  at the top of <file:drivers/net/irda/old_belkin.c>.
+
+config ACT200L_DONGLE
+	tristate "ACTiSYS IR-200L dongle"
+	depends on DONGLE && IRDA && EXPERIMENTAL
+	help
+	  Say Y here if you want to build support for the ACTiSYS IR-200L
+	  dongle. If you want to compile it as a module, choose M here.
+	  The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
+	  port connector, and can currently only be used by IrTTY.
+	  To activate support for ACTiSYS IR-200L dongle you will have to
+	  start irattach like this: "irattach -d act200l".
+
+comment "Old SIR device drivers"
+
+config IRPORT_SIR
+	tristate "IrPORT (IrDA serial driver)"
+	depends on IRDA && BROKEN_ON_SMP
+	---help---
+	  Say Y here if you want to build support for the IrPORT IrDA device
+	  driver.  To compile it as a module, choose M here: the module will be
+	  called irport. IrPORT can be used instead of IrTTY and sometimes
+	  this can be better.  One example is if your IrDA port does not
+	  have echo-canceling, which will work OK with IrPORT since this
+	  driver is working in half-duplex mode only.  You don't need to use
+	  irattach with IrPORT, but you just insert it the same way as FIR
+	  drivers (insmod irport io=0x3e8 irq=11).  Notice that IrPORT is a
+	  SIR device driver which means that speed is limited to 115200 bps.
+
+	  If unsure, say Y.
+
+comment "Old Serial dongle support"
+
+config DONGLE_OLD
+	bool "Old Serial dongle support"
+	depends on (IRTTY_OLD || IRPORT_SIR) && BROKEN_ON_SMP
+	help
+	  Say Y here if you have an infrared device that connects to your
+	  computer's serial port. These devices are called dongles. Then say Y
+	  or M to the driver for your particular dongle below.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about serial dongles.
+
+config ESI_DONGLE_OLD
+	tristate "ESI JetEye PC dongle"
+	depends on DONGLE_OLD && IRDA
+	help
+	  Say Y here if you want to build support for the Extended Systems
+	  JetEye PC dongle.  To compile it as a module, choose M here.  The ESI
+	  dongle attaches to the normal 9-pin serial port connector, and can
+	  currently only be used by IrTTY.  To activate support for ESI
+	  dongles you will have to start irattach like this:
+	  "irattach -d esi".
+
+config ACTISYS_DONGLE_OLD
+	tristate "ACTiSYS IR-220L and IR220L+ dongle"
+	depends on DONGLE_OLD && IRDA
+	help
+	  Say Y here if you want to build support for the ACTiSYS IR-220L and
+	  IR220L+ dongles.  To compile it as a module, choose M here.  The
+	  ACTiSYS dongles attaches to the normal 9-pin serial port connector,
+	  and can currently only be used by IrTTY.  To activate support for
+	  ACTiSYS dongles you will have to start irattach like this:
+	  "irattach -d actisys" or "irattach -d actisys+".
+
+config TEKRAM_DONGLE_OLD
+	tristate "Tekram IrMate 210B dongle"
+	depends on DONGLE_OLD && IRDA
+	help
+	  Say Y here if you want to build support for the Tekram IrMate 210B
+	  dongle.  To compile it as a module, choose M here.  The Tekram dongle
+	  attaches to the normal 9-pin serial port connector, and can
+	  currently only be used by IrTTY.  To activate support for Tekram
+	  dongles you will have to start irattach like this:
+	  "irattach -d tekram".
+
+config GIRBIL_DONGLE_OLD
+	tristate "Greenwich GIrBIL dongle"
+	depends on DONGLE_OLD && IRDA
+	help
+	  Say Y here if you want to build support for the Greenwich GIrBIL
+	  dongle.  To compile it as a module, choose M here.  The Greenwich
+	  dongle attaches to the normal 9-pin serial port connector, and can
+	  currently only be used by IrTTY.  To activate support for Greenwich
+	  dongles you will have to insert "irattach -d girbil" in the
+	  /etc/irda/drivers script.
+
+config LITELINK_DONGLE_OLD
+	tristate "Parallax LiteLink dongle"
+	depends on DONGLE_OLD && IRDA
+	help
+	  Say Y here if you want to build support for the Parallax Litelink
+	  dongle.  To compile it as a module, choose M here.  The Parallax
+	  dongle attaches to the normal 9-pin serial port connector, and can
+	  currently only be used by IrTTY.  To activate support for Parallax
+	  dongles you will have to start irattach like this:
+	  "irattach -d litelink".
+
+config MCP2120_DONGLE_OLD
+	tristate "Microchip MCP2120"
+	depends on DONGLE_OLD && IRDA
+	help
+	  Say Y here if you want to build support for the Microchip MCP2120
+	  dongle.  To compile it as a module, choose M here.  The MCP2120 dongle
+	  attaches to the normal 9-pin serial port connector, and can
+	  currently only be used by IrTTY.  To activate support for MCP2120
+	  dongles you will have to insert "irattach -d mcp2120" in the
+	  /etc/irda/drivers script.
+
+	  You must build this dongle yourself.  For more information see:
+	  <http://www.eyetap.org/~tangf/irda_sir_linux.html>
+
+config OLD_BELKIN_DONGLE_OLD
+	tristate "Old Belkin dongle"
+	depends on DONGLE_OLD && IRDA
+	help
+	  Say Y here if you want to build support for the Adaptec Airport 1000
+	  and 2000 dongles.  To compile it as a module, choose M here: the module
+	  will be called old_belkin.  Some information is contained in the
+	  comments at the top of <file:drivers/net/irda/old_belkin.c>.
+
+config ACT200L_DONGLE_OLD
+	tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)"
+	depends on DONGLE_OLD && EXPERIMENTAL && IRDA
+	help
+	  Say Y here if you want to build support for the ACTiSYS IR-200L
+	  dongle.  To compile it as a module, choose M here.  The ACTiSYS
+	  IR-200L dongle attaches to the normal 9-pin serial port connector,
+	  and can currently only be used by IrTTY. To activate support for
+	  ACTiSYS IR-200L dongles you will have to start irattach like this:
+	  "irattach -d act200l".
+
+config MA600_DONGLE_OLD
+	tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
+	depends on DONGLE_OLD && EXPERIMENTAL && IRDA
+	---help---
+	  Say Y here if you want to build support for the Mobile Action MA600
+	  dongle.  To compile it as a module, choose M here. The MA600 dongle
+	  attaches to the normal 9-pin serial port connector, and can
+	  currently only be tested on IrCOMM.  To activate support for MA600
+	  dongles you will have to insert "irattach -d ma600" in the
+	  /etc/irda/drivers script.  Note: irutils 0.9.15 requires no
+	  modification. irutils 0.9.9 needs modification. For more
+	  information, download the following tar gzip file.
+
+	  There is a pre-compiled module on
+	  <http://engsvr.ust.hk/~eetwl95/ma600.html>
+
+config EP7211_IR
+	tristate "EP7211 I/R support"
+	depends on DONGLE_OLD && ARCH_EP7211 && IRDA
+
+comment "FIR device drivers"
+
+config USB_IRDA
+	tristate "IrDA USB dongles"
+	depends on IRDA && USB
+	---help---
+	  Say Y here if you want to build support for the USB IrDA FIR Dongle
+	  device driver.  To compile it as a module, choose M here: the module
+	  will be called irda-usb.  IrDA-USB support the various IrDA USB
+	  dongles available and most of their pecularities.  Those dongles
+	  plug in the USB port of your computer, are plug and play, and
+	  support SIR and FIR (4Mbps) speeds.  On the other hand, those
+	  dongles tend to be less efficient than a FIR chipset.
+
+	  Please note that the driver is still experimental.  And of course,
+	  you will need both USB and IrDA support in your kernel...
+
+config SIGMATEL_FIR
+	tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)"
+	depends on IRDA && USB && EXPERIMENTAL
+	select CRC32
+	---help---
+	  Say Y here if you want to build support for the SigmaTel STIr4200
+	  USB IrDA FIR bridge device driver.  
+
+	  USB bridge based on the SigmaTel STIr4200 don't conform to the
+	  IrDA-USB device class specification, and therefore need their
+	  own specific driver. Those dongles support SIR and FIR (4Mbps)
+	  speeds. 
+
+	  To compile it as a module, choose M here: the module will be called
+	  stir4200.
+
+config NSC_FIR
+	tristate "NSC PC87108/PC87338"
+	depends on IRDA && ISA
+	help
+	  Say Y here if you want to build support for the NSC PC87108 and
+	  PC87338 IrDA chipsets.  This driver supports SIR,
+	  MIR and FIR (4Mbps) speeds.
+
+	  To compile it as a module, choose M here: the module will be called
+	  nsc-ircc.
+
+config WINBOND_FIR
+	tristate "Winbond W83977AF (IR)"
+	depends on IRDA && ISA
+	help
+	  Say Y here if you want to build IrDA support for the Winbond
+	  W83977AF super-io chipset.  This driver should be used for the IrDA
+	  chipset in the Corel NetWinder.  The driver supports SIR, MIR and
+	  FIR (4Mbps) speeds.
+
+	  To compile it as a module, choose M here: the module will be called
+	  w83977af_ir.
+
+config TOSHIBA_FIR
+	tristate "Toshiba Type-O IR Port"
+	depends on IRDA && PCI && !64BIT
+	help
+	  Say Y here if you want to build support for the Toshiba Type-O IR
+	  and Donau oboe chipsets. These chipsets are used by the Toshiba
+	  Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
+	  To compile it as a module, choose M here: the module will be called
+	  donauboe.
+
+config AU1000_FIR
+	tristate "Alchemy Au1000 SIR/FIR"
+	depends on MIPS_AU1000 && IRDA
+
+config SMC_IRCC_FIR
+	tristate "SMSC IrCC (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && IRDA && ISA
+	help
+	  Say Y here if you want to build support for the SMC Infrared
+	  Communications Controller.  It is used in a wide variety of
+	  laptops (Fujitsu, Sony, Compaq and some Toshiba).
+	  To compile it as a module, choose M here: the module will be called
+	  smsc-ircc2.o.
+
+config ALI_FIR
+	tristate "ALi M5123 FIR (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && IRDA && ISA
+	help
+	  Say Y here if you want to build support for the ALi M5123 FIR
+	  Controller.  The ALi M5123 FIR Controller is embedded in ALi M1543C,
+	  M1535, M1535D, M1535+, M1535D Sourth Bridge.  This driver supports
+	  SIR, MIR and FIR (4Mbps) speeds.
+
+	  To compile it as a module, choose M here: the module will be called
+	  ali-ircc.
+
+config VLSI_FIR
+	tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && IRDA && PCI
+	help
+	  Say Y here if you want to build support for the VLSI 82C147
+	  PCI-IrDA Controller. This controller is used by the HP OmniBook 800
+	  and 5500 notebooks. The driver provides support for SIR, MIR and
+	  FIR (4Mbps) speeds.
+
+	  To compile it as a module, choose M here: the module will be called
+	  vlsi_ir.
+
+config SA1100_FIR
+	tristate "SA1100 Internal IR"
+	depends on ARCH_SA1100 && IRDA
+
+config VIA_FIR
+	tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
+	depends on IRDA && ISA && PCI
+	help
+	  Say Y here if you want to build support for the VIA VT8231
+	  and VIA VT1211 IrDA controllers, found on the motherboards using
+	  those those VIA chipsets. To use this controller, you will need
+	  to plug a specific 5 pins FIR IrDA dongle in the specific
+	  motherboard connector. The driver provides support for SIR, MIR
+	  and FIR (4Mbps) speeds.
+
+	  You will need to specify the 'dongle_id' module parameter to
+	  indicate the FIR dongle attached to the controller.
+
+	  To compile it as a module, choose M here: the module will be called
+	  via-ircc.
+
+endmenu
+