aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/irda/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/irda/Kconfig
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/irda/Kconfig')
-rw-r--r--drivers/net/irda/Kconfig404
1 files changed, 404 insertions, 0 deletions
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
new file mode 100644
index 00000000000..a464841da49
--- /dev/null
+++ b/drivers/net/irda/Kconfig
@@ -0,0 +1,404 @@
+
+menu "Infrared-port device drivers"
+ depends on IRDA!=n
+
+comment "SIR device drivers"
+
+config IRTTY_SIR
+ tristate "IrTTY (uses Linux serial driver)"
+ depends on IRDA
+ help
+ Say Y here if you want to build support for the IrTTY line
+ discipline. To compile it as a module, choose M here: the module
+ will be called irtty-sir. IrTTY makes it possible to use Linux's
+ own serial driver for all IrDA ports that are 16550 compatible.
+ Most IrDA chips are 16550 compatible so you should probably say Y
+ to this option. Using IrTTY will however limit the speed of the
+ connection to 115200 bps (IrDA SIR mode).
+
+ If unsure, say Y.
+
+comment "Dongle support"
+
+config DONGLE
+ bool "Serial dongle support"
+ depends on IRTTY_SIR
+ help
+ Say Y here if you have an infrared device that connects to your
+ computer's serial port. These devices are called dongles. Then say Y
+ or M to the driver for your particular dongle below.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about serial dongles.
+
+config ESI_DONGLE
+ tristate "ESI JetEye PC dongle"
+ depends on DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Extended Systems
+ JetEye PC dongle. To compile it as a module, choose M here. The ESI
+ dongle attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for ESI
+ dongles you will have to start irattach like this:
+ "irattach -d esi".
+
+config ACTISYS_DONGLE
+ tristate "ACTiSYS IR-220L and IR220L+ dongle"
+ depends on DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the ACTiSYS IR-220L and
+ IR220L+ dongles. To compile it as a module, choose M here. The
+ ACTiSYS dongles attaches to the normal 9-pin serial port connector,
+ and can currently only be used by IrTTY. To activate support for
+ ACTiSYS dongles you will have to start irattach like this:
+ "irattach -d actisys" or "irattach -d actisys+".
+
+config TEKRAM_DONGLE
+ tristate "Tekram IrMate 210B dongle"
+ depends on DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Tekram IrMate 210B
+ dongle. To compile it as a module, choose M here. The Tekram dongle
+ attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for Tekram
+ dongles you will have to start irattach like this:
+ "irattach -d tekram".
+
+config LITELINK_DONGLE
+ tristate "Parallax LiteLink dongle"
+ depends on DONGLE && IRDA
+ help
+ Say Y here if you want to build support for the Parallax Litelink
+ dongle. To compile it as a module, choose M here. The Parallax
+ dongle attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for Parallax
+ dongles you will have to start irattach like this:
+ "irattach -d litelink".
+
+config MA600_DONGLE
+ tristate "Mobile Action MA600 dongle"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the Mobile Action MA600
+ dongle. To compile it as a module, choose M here. The MA600 dongle
+ attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. The driver should also support
+ the MA620 USB version of the dongle, if the integrated USB-to-RS232
+ converter is supported by usbserial. To activate support for
+ MA600 dongle you will have to start irattach like this:
+ "irattach -d ma600".
+
+config GIRBIL_DONGLE
+ tristate "Greenwich GIrBIL dongle"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the Greenwich GIrBIL
+ dongle. If you want to compile it as a module, choose M here.
+ The Greenwich dongle attaches to the normal 9-pin serial port
+ connector, and can currently only be used by IrTTY. To activate
+ support for Greenwich dongles you will have to start irattach
+ like this: "irattach -d girbil".
+
+config MCP2120_DONGLE
+ tristate "Microchip MCP2120"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the Microchip MCP2120
+ dongle. If you want to compile it as a module, choose M here.
+ The MCP2120 dongle attaches to the normal 9-pin serial port
+ connector, and can currently only be used by IrTTY. To activate
+ support for MCP2120 dongles you will have to start irattach
+ like this: "irattach -d mcp2120".
+
+ You must build this dongle yourself. For more information see:
+ <http://www.eyetap.org/~tangf/irda_sir_linux.html>
+
+config OLD_BELKIN_DONGLE
+ tristate "Old Belkin dongle"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the Adaptec Airport 1000
+ and 2000 dongles. If you want to compile it as a module, choose
+ M here. Some information is contained in the comments
+ at the top of <file:drivers/net/irda/old_belkin.c>.
+
+config ACT200L_DONGLE
+ tristate "ACTiSYS IR-200L dongle"
+ depends on DONGLE && IRDA && EXPERIMENTAL
+ help
+ Say Y here if you want to build support for the ACTiSYS IR-200L
+ dongle. If you want to compile it as a module, choose M here.
+ The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
+ port connector, and can currently only be used by IrTTY.
+ To activate support for ACTiSYS IR-200L dongle you will have to
+ start irattach like this: "irattach -d act200l".
+
+comment "Old SIR device drivers"
+
+config IRPORT_SIR
+ tristate "IrPORT (IrDA serial driver)"
+ depends on IRDA && BROKEN_ON_SMP
+ ---help---
+ Say Y here if you want to build support for the IrPORT IrDA device
+ driver. To compile it as a module, choose M here: the module will be
+ called irport. IrPORT can be used instead of IrTTY and sometimes
+ this can be better. One example is if your IrDA port does not
+ have echo-canceling, which will work OK with IrPORT since this
+ driver is working in half-duplex mode only. You don't need to use
+ irattach with IrPORT, but you just insert it the same way as FIR
+ drivers (insmod irport io=0x3e8 irq=11). Notice that IrPORT is a
+ SIR device driver which means that speed is limited to 115200 bps.
+
+ If unsure, say Y.
+
+comment "Old Serial dongle support"
+
+config DONGLE_OLD
+ bool "Old Serial dongle support"
+ depends on (IRTTY_OLD || IRPORT_SIR) && BROKEN_ON_SMP
+ help
+ Say Y here if you have an infrared device that connects to your
+ computer's serial port. These devices are called dongles. Then say Y
+ or M to the driver for your particular dongle below.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about serial dongles.
+
+config ESI_DONGLE_OLD
+ tristate "ESI JetEye PC dongle"
+ depends on DONGLE_OLD && IRDA
+ help
+ Say Y here if you want to build support for the Extended Systems
+ JetEye PC dongle. To compile it as a module, choose M here. The ESI
+ dongle attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for ESI
+ dongles you will have to start irattach like this:
+ "irattach -d esi".
+
+config ACTISYS_DONGLE_OLD
+ tristate "ACTiSYS IR-220L and IR220L+ dongle"
+ depends on DONGLE_OLD && IRDA
+ help
+ Say Y here if you want to build support for the ACTiSYS IR-220L and
+ IR220L+ dongles. To compile it as a module, choose M here. The
+ ACTiSYS dongles attaches to the normal 9-pin serial port connector,
+ and can currently only be used by IrTTY. To activate support for
+ ACTiSYS dongles you will have to start irattach like this:
+ "irattach -d actisys" or "irattach -d actisys+".
+
+config TEKRAM_DONGLE_OLD
+ tristate "Tekram IrMate 210B dongle"
+ depends on DONGLE_OLD && IRDA
+ help
+ Say Y here if you want to build support for the Tekram IrMate 210B
+ dongle. To compile it as a module, choose M here. The Tekram dongle
+ attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for Tekram
+ dongles you will have to start irattach like this:
+ "irattach -d tekram".
+
+config GIRBIL_DONGLE_OLD
+ tristate "Greenwich GIrBIL dongle"
+ depends on DONGLE_OLD && IRDA
+ help
+ Say Y here if you want to build support for the Greenwich GIrBIL
+ dongle. To compile it as a module, choose M here. The Greenwich
+ dongle attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for Greenwich
+ dongles you will have to insert "irattach -d girbil" in the
+ /etc/irda/drivers script.
+
+config LITELINK_DONGLE_OLD
+ tristate "Parallax LiteLink dongle"
+ depends on DONGLE_OLD && IRDA
+ help
+ Say Y here if you want to build support for the Parallax Litelink
+ dongle. To compile it as a module, choose M here. The Parallax
+ dongle attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for Parallax
+ dongles you will have to start irattach like this:
+ "irattach -d litelink".
+
+config MCP2120_DONGLE_OLD
+ tristate "Microchip MCP2120"
+ depends on DONGLE_OLD && IRDA
+ help
+ Say Y here if you want to build support for the Microchip MCP2120
+ dongle. To compile it as a module, choose M here. The MCP2120 dongle
+ attaches to the normal 9-pin serial port connector, and can
+ currently only be used by IrTTY. To activate support for MCP2120
+ dongles you will have to insert "irattach -d mcp2120" in the
+ /etc/irda/drivers script.
+
+ You must build this dongle yourself. For more information see:
+ <http://www.eyetap.org/~tangf/irda_sir_linux.html>
+
+config OLD_BELKIN_DONGLE_OLD
+ tristate "Old Belkin dongle"
+ depends on DONGLE_OLD && IRDA
+ help
+ Say Y here if you want to build support for the Adaptec Airport 1000
+ and 2000 dongles. To compile it as a module, choose M here: the module
+ will be called old_belkin. Some information is contained in the
+ comments at the top of <file:drivers/net/irda/old_belkin.c>.
+
+config ACT200L_DONGLE_OLD
+ tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)"
+ depends on DONGLE_OLD && EXPERIMENTAL && IRDA
+ help
+ Say Y here if you want to build support for the ACTiSYS IR-200L
+ dongle. To compile it as a module, choose M here. The ACTiSYS
+ IR-200L dongle attaches to the normal 9-pin serial port connector,
+ and can currently only be used by IrTTY. To activate support for
+ ACTiSYS IR-200L dongles you will have to start irattach like this:
+ "irattach -d act200l".
+
+config MA600_DONGLE_OLD
+ tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
+ depends on DONGLE_OLD && EXPERIMENTAL && IRDA
+ ---help---
+ Say Y here if you want to build support for the Mobile Action MA600
+ dongle. To compile it as a module, choose M here. The MA600 dongle
+ attaches to the normal 9-pin serial port connector, and can
+ currently only be tested on IrCOMM. To activate support for MA600
+ dongles you will have to insert "irattach -d ma600" in the
+ /etc/irda/drivers script. Note: irutils 0.9.15 requires no
+ modification. irutils 0.9.9 needs modification. For more
+ information, download the following tar gzip file.
+
+ There is a pre-compiled module on
+ <http://engsvr.ust.hk/~eetwl95/ma600.html>
+
+config EP7211_IR
+ tristate "EP7211 I/R support"
+ depends on DONGLE_OLD && ARCH_EP7211 && IRDA
+
+comment "FIR device drivers"
+
+config USB_IRDA
+ tristate "IrDA USB dongles"
+ depends on IRDA && USB
+ ---help---
+ Say Y here if you want to build support for the USB IrDA FIR Dongle
+ device driver. To compile it as a module, choose M here: the module
+ will be called irda-usb. IrDA-USB support the various IrDA USB
+ dongles available and most of their pecularities. Those dongles
+ plug in the USB port of your computer, are plug and play, and
+ support SIR and FIR (4Mbps) speeds. On the other hand, those
+ dongles tend to be less efficient than a FIR chipset.
+
+ Please note that the driver is still experimental. And of course,
+ you will need both USB and IrDA support in your kernel...
+
+config SIGMATEL_FIR
+ tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)"
+ depends on IRDA && USB && EXPERIMENTAL
+ select CRC32
+ ---help---
+ Say Y here if you want to build support for the SigmaTel STIr4200
+ USB IrDA FIR bridge device driver.
+
+ USB bridge based on the SigmaTel STIr4200 don't conform to the
+ IrDA-USB device class specification, and therefore need their
+ own specific driver. Those dongles support SIR and FIR (4Mbps)
+ speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ stir4200.
+
+config NSC_FIR
+ tristate "NSC PC87108/PC87338"
+ depends on IRDA && ISA
+ help
+ Say Y here if you want to build support for the NSC PC87108 and
+ PC87338 IrDA chipsets. This driver supports SIR,
+ MIR and FIR (4Mbps) speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ nsc-ircc.
+
+config WINBOND_FIR
+ tristate "Winbond W83977AF (IR)"
+ depends on IRDA && ISA
+ help
+ Say Y here if you want to build IrDA support for the Winbond
+ W83977AF super-io chipset. This driver should be used for the IrDA
+ chipset in the Corel NetWinder. The driver supports SIR, MIR and
+ FIR (4Mbps) speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ w83977af_ir.
+
+config TOSHIBA_FIR
+ tristate "Toshiba Type-O IR Port"
+ depends on IRDA && PCI && !64BIT
+ help
+ Say Y here if you want to build support for the Toshiba Type-O IR
+ and Donau oboe chipsets. These chipsets are used by the Toshiba
+ Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
+ To compile it as a module, choose M here: the module will be called
+ donauboe.
+
+config AU1000_FIR
+ tristate "Alchemy Au1000 SIR/FIR"
+ depends on MIPS_AU1000 && IRDA
+
+config SMC_IRCC_FIR
+ tristate "SMSC IrCC (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && IRDA && ISA
+ help
+ Say Y here if you want to build support for the SMC Infrared
+ Communications Controller. It is used in a wide variety of
+ laptops (Fujitsu, Sony, Compaq and some Toshiba).
+ To compile it as a module, choose M here: the module will be called
+ smsc-ircc2.o.
+
+config ALI_FIR
+ tristate "ALi M5123 FIR (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && IRDA && ISA
+ help
+ Say Y here if you want to build support for the ALi M5123 FIR
+ Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
+ M1535, M1535D, M1535+, M1535D Sourth Bridge. This driver supports
+ SIR, MIR and FIR (4Mbps) speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ ali-ircc.
+
+config VLSI_FIR
+ tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && IRDA && PCI
+ help
+ Say Y here if you want to build support for the VLSI 82C147
+ PCI-IrDA Controller. This controller is used by the HP OmniBook 800
+ and 5500 notebooks. The driver provides support for SIR, MIR and
+ FIR (4Mbps) speeds.
+
+ To compile it as a module, choose M here: the module will be called
+ vlsi_ir.
+
+config SA1100_FIR
+ tristate "SA1100 Internal IR"
+ depends on ARCH_SA1100 && IRDA
+
+config VIA_FIR
+ tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
+ depends on IRDA && ISA && PCI
+ help
+ Say Y here if you want to build support for the VIA VT8231
+ and VIA VT1211 IrDA controllers, found on the motherboards using
+ those those VIA chipsets. To use this controller, you will need
+ to plug a specific 5 pins FIR IrDA dongle in the specific
+ motherboard connector. The driver provides support for SIR, MIR
+ and FIR (4Mbps) speeds.
+
+ You will need to specify the 'dongle_id' module parameter to
+ indicate the FIR dongle attached to the controller.
+
+ To compile it as a module, choose M here: the module will be called
+ via-ircc.
+
+endmenu
+