ixgbe: update to latest common code module

This is a massive update that includes infrastructure for further patches
where we will add support for more phy types and eeprom types.

This code is shared as much as possible with other drivers, so the code may
seem a little obtuse at times but wherever possible we keep to the linux
style and methods.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 608 insertions, 306 deletions

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index f5b2617111a..a11ff0db9d2 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -33,20 +33,28 @@
 #include "ixgbe_common.h"
 #include "ixgbe_phy.h"
 
-static s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw);
-
 static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw);
+static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw);
 static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw);
 static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw);
+static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw);
+static void ixgbe_standby_eeprom(struct ixgbe_hw *hw);
+static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+                                        u16 count);
+static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count);
+static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+static void ixgbe_release_eeprom(struct ixgbe_hw *hw);
 static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw);
 
-static s32 ixgbe_clear_vfta(struct ixgbe_hw *hw);
-static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw);
+static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index);
+static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index);
 static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
 static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr);
+static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
 
 /**
- *  ixgbe_start_hw - Prepare hardware for TX/RX
+ *  ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
  *  @hw: pointer to hardware structure
  *
  *  Starts the hardware by filling the bus info structure and media type, clears
@@ -54,7 +62,7 @@ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr);
  *  table, VLAN filter table, calls routine to set up link and flow control
  *  settings, and leaves transmit and receive units disabled and uninitialized
  **/
-s32 ixgbe_start_hw(struct ixgbe_hw *hw)
+s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 {
 	u32 ctrl_ext;
 
@@ -62,22 +70,22 @@ s32 ixgbe_start_hw(struct ixgbe_hw *hw)
 	hw->phy.media_type = hw->mac.ops.get_media_type(hw);
 
 	/* Identify the PHY */
-	ixgbe_identify_phy(hw);
+	hw->phy.ops.identify(hw);
 
 	/*
 	 * Store MAC address from RAR0, clear receive address registers, and
 	 * clear the multicast table
 	 */
-	ixgbe_init_rx_addrs(hw);
+	hw->mac.ops.init_rx_addrs(hw);
 
 	/* Clear the VLAN filter table */
-	ixgbe_clear_vfta(hw);
+	hw->mac.ops.clear_vfta(hw);
 
 	/* Set up link */
 	hw->mac.ops.setup_link(hw);
 
 	/* Clear statistics registers */
-	ixgbe_clear_hw_cntrs(hw);
+	hw->mac.ops.clear_hw_cntrs(hw);
 
 	/* Set No Snoop Disable */
 	ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
@@ -92,34 +100,34 @@ s32 ixgbe_start_hw(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_init_hw - Generic hardware initialization
+ *  ixgbe_init_hw_generic - Generic hardware initialization
  *  @hw: pointer to hardware structure
  *
- *  Initialize the hardware by reseting the hardware, filling the bus info
+ *  Initialize the hardware by resetting the hardware, filling the bus info
  *  structure and media type, clears all on chip counters, initializes receive
  *  address registers, multicast table, VLAN filter table, calls routine to set
  *  up link and flow control settings, and leaves transmit and receive units
  *  disabled and uninitialized
  **/
-s32 ixgbe_init_hw(struct ixgbe_hw *hw)
+s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
 {
 	/* Reset the hardware */
-	hw->mac.ops.reset(hw);
+	hw->mac.ops.reset_hw(hw);
 
 	/* Start the HW */
-	ixgbe_start_hw(hw);
+	hw->mac.ops.start_hw(hw);
 
 	return 0;
 }
 
 /**
- *  ixgbe_clear_hw_cntrs - Generic clear hardware counters
+ *  ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters
  *  @hw: pointer to hardware structure
  *
  *  Clears all hardware statistics counters by reading them from the hardware
  *  Statistics counters are clear on read.
  **/
-static s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
+s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
 {
 	u16 i = 0;
 
@@ -191,7 +199,36 @@ static s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_get_mac_addr - Generic get MAC address
+ *  ixgbe_read_pba_num_generic - Reads part number from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @pba_num: stores the part number from the EEPROM
+ *
+ *  Reads the part number from the EEPROM.
+ **/
+s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num)
+{
+	s32 ret_val;
+	u16 data;
+
+	ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data);
+	if (ret_val) {
+		hw_dbg(hw, "NVM Read Error\n");
+		return ret_val;
+	}
+	*pba_num = (u32)(data << 16);
+
+	ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &data);
+	if (ret_val) {
+		hw_dbg(hw, "NVM Read Error\n");
+		return ret_val;
+	}
+	*pba_num |= data;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_get_mac_addr_generic - Generic get MAC address
  *  @hw: pointer to hardware structure
  *  @mac_addr: Adapter MAC address
  *
@@ -199,7 +236,7 @@ static s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
  *  A reset of the adapter must be performed prior to calling this function
  *  in order for the MAC address to have been loaded from the EEPROM into RAR0
  **/
-s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
+s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr)
 {
 	u32 rar_high;
 	u32 rar_low;
@@ -217,30 +254,8 @@ s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
 	return 0;
 }
 
-s32 ixgbe_read_part_num(struct ixgbe_hw *hw, u32 *part_num)
-{
-	s32 ret_val;
-	u16 data;
-
-	ret_val = ixgbe_read_eeprom(hw, IXGBE_PBANUM0_PTR, &data);
-	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
-		return ret_val;
-	}
-	*part_num = (u32)(data << 16);
-
-	ret_val = ixgbe_read_eeprom(hw, IXGBE_PBANUM1_PTR, &data);
-	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
-		return ret_val;
-	}
-	*part_num |= data;
-
-	return 0;
-}
-
 /**
- *  ixgbe_stop_adapter - Generic stop TX/RX units
+ *  ixgbe_stop_adapter_generic - Generic stop Tx/Rx units
  *  @hw: pointer to hardware structure
  *
  *  Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
@@ -248,7 +263,7 @@ s32 ixgbe_read_part_num(struct ixgbe_hw *hw, u32 *part_num)
  *  the shared code and drivers to determine if the adapter is in a stopped
  *  state and should not touch the hardware.
  **/
-s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
+s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
 {
 	u32 number_of_queues;
 	u32 reg_val;
@@ -264,6 +279,7 @@ s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
 	reg_val = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
 	reg_val &= ~(IXGBE_RXCTRL_RXEN);
 	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_val);
+	IXGBE_WRITE_FLUSH(hw);
 	msleep(2);
 
 	/* Clear interrupt mask to stop from interrupts being generated */
@@ -273,7 +289,7 @@ s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
 	IXGBE_READ_REG(hw, IXGBE_EICR);
 
 	/* Disable the transmit unit.  Each queue must be disabled. */
-	number_of_queues = hw->mac.num_tx_queues;
+	number_of_queues = hw->mac.max_tx_queues;
 	for (i = 0; i < number_of_queues; i++) {
 		reg_val = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
 		if (reg_val & IXGBE_TXDCTL_ENABLE) {
@@ -282,15 +298,22 @@ s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
 		}
 	}
 
+	/*
+	 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
+	 * access and verify no pending requests
+	 */
+	if (ixgbe_disable_pcie_master(hw) != 0)
+		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+
 	return 0;
 }
 
 /**
- *  ixgbe_led_on - Turns on the software controllable LEDs.
+ *  ixgbe_led_on_generic - Turns on the software controllable LEDs.
  *  @hw: pointer to hardware structure
  *  @index: led number to turn on
  **/
-s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
+s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index)
 {
 	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
 
@@ -304,11 +327,11 @@ s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
 }
 
 /**
- *  ixgbe_led_off - Turns off the software controllable LEDs.
+ *  ixgbe_led_off_generic - Turns off the software controllable LEDs.
  *  @hw: pointer to hardware structure
  *  @index: led number to turn off
  **/
-s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
+s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index)
 {
 	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
 
@@ -321,15 +344,14 @@ s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
 	return 0;
 }
 
-
 /**
- *  ixgbe_init_eeprom - Initialize EEPROM params
+ *  ixgbe_init_eeprom_params_generic - Initialize EEPROM params
  *  @hw: pointer to hardware structure
  *
  *  Initializes the EEPROM parameters ixgbe_eeprom_info within the
  *  ixgbe_hw struct in order to set up EEPROM access.
  **/
-s32 ixgbe_init_eeprom(struct ixgbe_hw *hw)
+s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
 {
 	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
 	u32 eec;
@@ -337,6 +359,9 @@ s32 ixgbe_init_eeprom(struct ixgbe_hw *hw)
 
 	if (eeprom->type == ixgbe_eeprom_uninitialized) {
 		eeprom->type = ixgbe_eeprom_none;
+		/* Set default semaphore delay to 10ms which is a well
+		 * tested value */
+		eeprom->semaphore_delay = 10;
 
 		/*
 		 * Check for EEPROM present first.
@@ -369,18 +394,85 @@ s32 ixgbe_init_eeprom(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_read_eeprom - Read EEPROM word using EERD
+ *  ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @data: read 16 bit value from EEPROM
+ *
+ *  Reads 16 bit value from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+                                       u16 *data)
+{
+	s32 status;
+	u16 word_in;
+	u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (offset >= hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+		goto out;
+	}
+
+	/* Prepare the EEPROM for reading  */
+	status = ixgbe_acquire_eeprom(hw);
+
+	if (status == 0) {
+		if (ixgbe_ready_eeprom(hw) != 0) {
+			ixgbe_release_eeprom(hw);
+			status = IXGBE_ERR_EEPROM;
+		}
+	}
+
+	if (status == 0) {
+		ixgbe_standby_eeprom(hw);
+
+		/*
+		 * Some SPI eeproms use the 8th address bit embedded in the
+		 * opcode
+		 */
+		if ((hw->eeprom.address_bits == 8) && (offset >= 128))
+			read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+		/* Send the READ command (opcode + addr) */
+		ixgbe_shift_out_eeprom_bits(hw, read_opcode,
+		                            IXGBE_EEPROM_OPCODE_BITS);
+		ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2),
+		                            hw->eeprom.address_bits);
+
+		/* Read the data. */
+		word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
+		*data = (word_in >> 8) | (word_in << 8);
+
+		/* End this read operation */
+		ixgbe_release_eeprom(hw);
+	}
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_read_eeprom_generic - Read EEPROM word using EERD
  *  @hw: pointer to hardware structure
  *  @offset: offset of  word in the EEPROM to read
  *  @data: word read from the EEPROM
  *
  *  Reads a 16 bit word from the EEPROM using the EERD register.
  **/
-s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
+s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
 {
 	u32 eerd;
 	s32 status;
 
+	hw->eeprom.ops.init_params(hw);
+
+	if (offset >= hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+		goto out;
+	}
+
 	eerd = (offset << IXGBE_EEPROM_READ_ADDR_SHIFT) +
 	       IXGBE_EEPROM_READ_REG_START;
 
@@ -393,6 +485,7 @@ s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
 	else
 		hw_dbg(hw, "Eeprom read timed out\n");
 
+out:
 	return status;
 }
 
@@ -420,6 +513,58 @@ static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw)
 }
 
 /**
+ *  ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang
+ *  @hw: pointer to hardware structure
+ *
+ *  Prepares EEPROM for access using bit-bang method. This function should
+ *  be called before issuing a command to the EEPROM.
+ **/
+static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
+{
+	s32 status = 0;
+	u32 eec;
+	u32 i;
+
+	if (ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0)
+		status = IXGBE_ERR_SWFW_SYNC;
+
+	if (status == 0) {
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+		/* Request EEPROM Access */
+		eec |= IXGBE_EEC_REQ;
+		IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+
+		for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) {
+			eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+			if (eec & IXGBE_EEC_GNT)
+				break;
+			udelay(5);
+		}
+
+		/* Release if grant not acquired */
+		if (!(eec & IXGBE_EEC_GNT)) {
+			eec &= ~IXGBE_EEC_REQ;
+			IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+			hw_dbg(hw, "Could not acquire EEPROM grant\n");
+
+			ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+			status = IXGBE_ERR_EEPROM;
+		}
+	}
+
+	/* Setup EEPROM for Read/Write */
+	if (status == 0) {
+		/* Clear CS and SK */
+		eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK);
+		IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+		IXGBE_WRITE_FLUSH(hw);
+		udelay(1);
+	}
+	return status;
+}
+
+/**
  *  ixgbe_get_eeprom_semaphore - Get hardware semaphore
  *  @hw: pointer to hardware structure
  *
@@ -503,6 +648,217 @@ static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw)
 }
 
 /**
+ *  ixgbe_ready_eeprom - Polls for EEPROM ready
+ *  @hw: pointer to hardware structure
+ **/
+static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw)
+{
+	s32 status = 0;
+	u16 i;
+	u8 spi_stat_reg;
+
+	/*
+	 * Read "Status Register" repeatedly until the LSB is cleared.  The
+	 * EEPROM will signal that the command has been completed by clearing
+	 * bit 0 of the internal status register.  If it's not cleared within
+	 * 5 milliseconds, then error out.
+	 */
+	for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) {
+		ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI,
+		                            IXGBE_EEPROM_OPCODE_BITS);
+		spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8);
+		if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI))
+			break;
+
+		udelay(5);
+		ixgbe_standby_eeprom(hw);
+	};
+
+	/*
+	 * On some parts, SPI write time could vary from 0-20mSec on 3.3V
+	 * devices (and only 0-5mSec on 5V devices)
+	 */
+	if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) {
+		hw_dbg(hw, "SPI EEPROM Status error\n");
+		status = IXGBE_ERR_EEPROM;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_standby_eeprom - Returns EEPROM to a "standby" state
+ *  @hw: pointer to hardware structure
+ **/
+static void ixgbe_standby_eeprom(struct ixgbe_hw *hw)
+{
+	u32 eec;
+
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+	/* Toggle CS to flush commands */
+	eec |= IXGBE_EEC_CS;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(1);
+	eec &= ~IXGBE_EEC_CS;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(1);
+}
+
+/**
+ *  ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM.
+ *  @hw: pointer to hardware structure
+ *  @data: data to send to the EEPROM
+ *  @count: number of bits to shift out
+ **/
+static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+                                        u16 count)
+{
+	u32 eec;
+	u32 mask;
+	u32 i;
+
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+	/*
+	 * Mask is used to shift "count" bits of "data" out to the EEPROM
+	 * one bit at a time.  Determine the starting bit based on count
+	 */
+	mask = 0x01 << (count - 1);
+
+	for (i = 0; i < count; i++) {
+		/*
+		 * A "1" is shifted out to the EEPROM by setting bit "DI" to a
+		 * "1", and then raising and then lowering the clock (the SK
+		 * bit controls the clock input to the EEPROM).  A "0" is
+		 * shifted out to the EEPROM by setting "DI" to "0" and then
+		 * raising and then lowering the clock.
+		 */
+		if (data & mask)
+			eec |= IXGBE_EEC_DI;
+		else
+			eec &= ~IXGBE_EEC_DI;
+
+		IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+		IXGBE_WRITE_FLUSH(hw);
+
+		udelay(1);
+
+		ixgbe_raise_eeprom_clk(hw, &eec);
+		ixgbe_lower_eeprom_clk(hw, &eec);
+
+		/*
+		 * Shift mask to signify next bit of data to shift in to the
+		 * EEPROM
+		 */
+		mask = mask >> 1;
+	};
+
+	/* We leave the "DI" bit set to "0" when we leave this routine. */
+	eec &= ~IXGBE_EEC_DI;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ *  ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
+ *  @hw: pointer to hardware structure
+ **/
+static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
+{
+	u32 eec;
+	u32 i;
+	u16 data = 0;
+
+	/*
+	 * In order to read a register from the EEPROM, we need to shift
+	 * 'count' bits in from the EEPROM. Bits are "shifted in" by raising
+	 * the clock input to the EEPROM (setting the SK bit), and then reading
+	 * the value of the "DO" bit.  During this "shifting in" process the
+	 * "DI" bit should always be clear.
+	 */
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+	eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI);
+
+	for (i = 0; i < count; i++) {
+		data = data << 1;
+		ixgbe_raise_eeprom_clk(hw, &eec);
+
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+		eec &= ~(IXGBE_EEC_DI);
+		if (eec & IXGBE_EEC_DO)
+			data |= 1;
+
+		ixgbe_lower_eeprom_clk(hw, &eec);
+	}
+
+	return data;
+}
+
+/**
+ *  ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input.
+ *  @hw: pointer to hardware structure
+ *  @eec: EEC register's current value
+ **/
+static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+	/*
+	 * Raise the clock input to the EEPROM
+	 * (setting the SK bit), then delay
+	 */
+	*eec = *eec | IXGBE_EEC_SK;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(1);
+}
+
+/**
+ *  ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
+ *  @hw: pointer to hardware structure
+ *  @eecd: EECD's current value
+ **/
+static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+	/*
+	 * Lower the clock input to the EEPROM (clearing the SK bit), then
+	 * delay
+	 */
+	*eec = *eec & ~IXGBE_EEC_SK;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(1);
+}
+
+/**
+ *  ixgbe_release_eeprom - Release EEPROM, release semaphores
+ *  @hw: pointer to hardware structure
+ **/
+static void ixgbe_release_eeprom(struct ixgbe_hw *hw)
+{
+	u32 eec;
+
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+	eec |= IXGBE_EEC_CS;  /* Pull CS high */
+	eec &= ~IXGBE_EEC_SK; /* Lower SCK */
+
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+	IXGBE_WRITE_FLUSH(hw);
+
+	udelay(1);
+
+	/* Stop requesting EEPROM access */
+	eec &= ~IXGBE_EEC_REQ;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+
+	ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+}
+
+/**
  *  ixgbe_calc_eeprom_checksum - Calculates and returns the checksum
  *  @hw: pointer to hardware structure
  **/
@@ -517,7 +873,7 @@ static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw)
 
 	/* Include 0x0-0x3F in the checksum */
 	for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
-		if (ixgbe_read_eeprom(hw, i, &word) != 0) {
+		if (hw->eeprom.ops.read(hw, i, &word) != 0) {
 			hw_dbg(hw, "EEPROM read failed\n");
 			break;
 		}
@@ -526,15 +882,15 @@ static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw)
 
 	/* Include all data from pointers except for the fw pointer */
 	for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
-		ixgbe_read_eeprom(hw, i, &pointer);
+		hw->eeprom.ops.read(hw, i, &pointer);
 
 		/* Make sure the pointer seems valid */
 		if (pointer != 0xFFFF && pointer != 0) {
-			ixgbe_read_eeprom(hw, pointer, &length);
+			hw->eeprom.ops.read(hw, pointer, &length);
 
 			if (length != 0xFFFF && length != 0) {
 				for (j = pointer+1; j <= pointer+length; j++) {
-					ixgbe_read_eeprom(hw, j, &word);
+					hw->eeprom.ops.read(hw, j, &word);
 					checksum += word;
 				}
 			}
@@ -547,14 +903,15 @@ static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_validate_eeprom_checksum - Validate EEPROM checksum
+ *  ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum
  *  @hw: pointer to hardware structure
  *  @checksum_val: calculated checksum
  *
  *  Performs checksum calculation and validates the EEPROM checksum.  If the
  *  caller does not need checksum_val, the value can be NULL.
  **/
-s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
+s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
+                                           u16 *checksum_val)
 {
 	s32 status;
 	u16 checksum;
@@ -565,12 +922,12 @@ s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
 	 * not continue or we could be in for a very long wait while every
 	 * EEPROM read fails
 	 */
-	status = ixgbe_read_eeprom(hw, 0, &checksum);
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
 
 	if (status == 0) {
 		checksum = ixgbe_calc_eeprom_checksum(hw);
 
-		ixgbe_read_eeprom(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
+		hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
 
 		/*
 		 * Verify read checksum from EEPROM is the same as
@@ -590,6 +947,33 @@ s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
 }
 
 /**
+ *  ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u16 checksum;
+
+	/*
+	 * Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = hw->eeprom.ops.read(hw, 0, &checksum);
+
+	if (status == 0) {
+		checksum = ixgbe_calc_eeprom_checksum(hw);
+		status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM,
+		                            checksum);
+	} else {
+		hw_dbg(hw, "EEPROM read failed\n");
+	}
+
+	return status;
+}
+
+/**
  *  ixgbe_validate_mac_addr - Validate MAC address
  *  @mac_addr: pointer to MAC address.
  *
@@ -607,58 +991,137 @@ s32 ixgbe_validate_mac_addr(u8 *mac_addr)
 		status = IXGBE_ERR_INVALID_MAC_ADDR;
 	/* Reject the zero address */
 	else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
-		 mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0)
+	         mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0)
 		status = IXGBE_ERR_INVALID_MAC_ADDR;
 
 	return status;
 }
 
 /**
- *  ixgbe_set_rar - Set RX address register
+ *  ixgbe_set_rar_generic - Set Rx address register
  *  @hw: pointer to hardware structure
- *  @addr: Address to put into receive address register
  *  @index: Receive address register to write
- *  @vind: Vind to set RAR to
+ *  @addr: Address to put into receive address register
+ *  @vmdq: VMDq "set" or "pool" index
  *  @enable_addr: set flag that address is active
  *
  *  Puts an ethernet address into a receive address register.
  **/
-s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind,
-		  u32 enable_addr)
+s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+                          u32 enable_addr)
 {
 	u32 rar_low, rar_high;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	/* setup VMDq pool selection before this RAR gets enabled */
+	hw->mac.ops.set_vmdq(hw, index, vmdq);
 
+	/* Make sure we are using a valid rar index range */
+	if (index < rar_entries) {
 	/*
-	 * HW expects these in little endian so we reverse the byte order from
-	 * network order (big endian) to little endian
+		 * HW expects these in little endian so we reverse the byte
+		 * order from network order (big endian) to little endian
 	 */
 	rar_low = ((u32)addr[0] |
 		   ((u32)addr[1] << 8) |
 		   ((u32)addr[2] << 16) |
 		   ((u32)addr[3] << 24));
-
-	rar_high = ((u32)addr[4] |
-		    ((u32)addr[5] << 8) |
-		    ((vind << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK));
+		/*
+		 * Some parts put the VMDq setting in the extra RAH bits,
+		 * so save everything except the lower 16 bits that hold part
+		 * of the address and the address valid bit.
+		 */
+		rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+		rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+		rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8));
 
 	if (enable_addr != 0)
 		rar_high |= IXGBE_RAH_AV;
 
 	IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
 	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+	} else {
+		hw_dbg(hw, "RAR index %d is out of range.\n", index);
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_clear_rar_generic - Remove Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: Receive address register to write
+ *
+ *  Clears an ethernet address from a receive address register.
+ **/
+s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index)
+{
+	u32 rar_high;
+	u32 rar_entries = hw->mac.num_rar_entries;
+
+	/* Make sure we are using a valid rar index range */
+	if (index < rar_entries) {
+		/*
+		 * Some parts put the VMDq setting in the extra RAH bits,
+		 * so save everything except the lower 16 bits that hold part
+		 * of the address and the address valid bit.
+		 */
+		rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+		rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+
+		IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+	} else {
+		hw_dbg(hw, "RAR index %d is out of range.\n", index);
+	}
+
+	/* clear VMDq pool/queue selection for this RAR */
+	hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL);
 
 	return 0;
 }
 
 /**
- *  ixgbe_init_rx_addrs - Initializes receive address filters.
+ *  ixgbe_enable_rar - Enable Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: index into the RAR table
+ *
+ *  Enables the select receive address register.
+ **/
+static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index)
+{
+	u32 rar_high;
+
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+	rar_high |= IXGBE_RAH_AV;
+	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+}
+
+/**
+ *  ixgbe_disable_rar - Disable Rx address register
+ *  @hw: pointer to hardware structure
+ *  @index: index into the RAR table
+ *
+ *  Disables the select receive address register.
+ **/
+static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index)
+{
+	u32 rar_high;
+
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+	rar_high &= (~IXGBE_RAH_AV);
+	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+}
+
+/**
+ *  ixgbe_init_rx_addrs_generic - Initializes receive address filters.
  *  @hw: pointer to hardware structure
  *
  *  Places the MAC address in receive address register 0 and clears the rest
- *  of the receive addresss registers. Clears the multicast table. Assumes
+ *  of the receive address registers. Clears the multicast table. Assumes
  *  the receiver is in reset when the routine is called.
  **/
-static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
+s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
 {
 	u32 i;
 	u32 rar_entries = hw->mac.num_rar_entries;
@@ -671,7 +1134,7 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
 	if (ixgbe_validate_mac_addr(hw->mac.addr) ==
 	    IXGBE_ERR_INVALID_MAC_ADDR) {
 		/* Get the MAC address from the RAR0 for later reference */
-		ixgbe_get_mac_addr(hw, hw->mac.addr);
+		hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
 
 		hw_dbg(hw, " Keeping Current RAR0 Addr =%.2X %.2X %.2X ",
 			  hw->mac.addr[0], hw->mac.addr[1],
@@ -687,13 +1150,14 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
 		hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3],
 			  hw->mac.addr[4], hw->mac.addr[5]);
 
-		ixgbe_set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+		hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
 	}
+	hw->addr_ctrl.overflow_promisc = 0;
 
 	hw->addr_ctrl.rar_used_count = 1;
 
 	/* Zero out the other receive addresses. */
-	hw_dbg(hw, "Clearing RAR[1-15]\n");
+	hw_dbg(hw, "Clearing RAR[1-%d]\n", rar_entries - 1);
 	for (i = 1; i < rar_entries; i++) {
 		IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
 		IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
@@ -708,6 +1172,9 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
 	for (i = 0; i < hw->mac.mcft_size; i++)
 		IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
 
+	if (hw->mac.ops.init_uta_tables)
+		hw->mac.ops.init_uta_tables(hw);
+
 	return 0;
 }
 
@@ -718,7 +1185,7 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
  *
  *  Adds it to unused receive address register or goes into promiscuous mode.
  **/
-void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr)
+static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
 {
 	u32 rar_entries = hw->mac.num_rar_entries;
 	u32 rar;
@@ -733,7 +1200,7 @@ void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr)
 	if (hw->addr_ctrl.rar_used_count < rar_entries) {
 		rar = hw->addr_ctrl.rar_used_count -
 		      hw->addr_ctrl.mc_addr_in_rar_count;
-		ixgbe_set_rar(hw, rar, addr, 0, IXGBE_RAH_AV);
+		hw->mac.ops.set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
 		hw_dbg(hw, "Added a secondary address to RAR[%d]\n", rar);
 		hw->addr_ctrl.rar_used_count++;
 	} else {
@@ -744,7 +1211,7 @@ void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr)
 }
 
 /**
- *  ixgbe_update_uc_addr_list - Updates MAC list of secondary addresses
+ *  ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
  *  @hw: pointer to hardware structure
  *  @addr_list: the list of new addresses
  *  @addr_count: number of addresses
@@ -757,7 +1224,7 @@ void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr)
  *  Drivers using secondary unicast addresses must set user_set_promisc when
  *  manually putting the device into promiscuous mode.
  **/
-s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
+s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
                               u32 addr_count, ixgbe_mc_addr_itr next)
 {
 	u8 *addr;
@@ -787,7 +1254,7 @@ s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
 	for (i = 0; i < addr_count; i++) {
 		hw_dbg(hw, " Adding the secondary addresses:\n");
 		addr = next(hw, &addr_list, &vmdq);
-		ixgbe_add_uc_addr(hw, addr);
+		ixgbe_add_uc_addr(hw, addr, vmdq);
 	}
 
 	if (hw->addr_ctrl.overflow_promisc) {
@@ -808,7 +1275,7 @@ s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
 		}
 	}
 
-	hw_dbg(hw, "ixgbe_update_uc_addr_list Complete\n");
+	hw_dbg(hw, "ixgbe_update_uc_addr_list_generic Complete\n");
 	return 0;
 }
 
@@ -821,7 +1288,7 @@ s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
  *  bit-vector to set in the multicast table. The hardware uses 12 bits, from
  *  incoming rx multicast addresses, to determine the bit-vector to check in
  *  the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
- *  by the MO field of the MCSTCTRL. The MO field is set during initalization
+ *  by the MO field of the MCSTCTRL. The MO field is set during initialization
  *  to mc_filter_type.
  **/
 static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
@@ -907,10 +1374,10 @@ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr)
 	 * else put it in the MTA
 	 */
 	if (hw->addr_ctrl.rar_used_count < rar_entries) {
+		/* use RAR from the end up for multicast */
 		rar = rar_entries - hw->addr_ctrl.mc_addr_in_rar_count - 1;
-		ixgbe_set_rar(hw, rar, mc_addr, 0, IXGBE_RAH_AV);
-		hw_dbg(hw, "Added a multicast address to RAR[%d]\n",
-			  hw->addr_ctrl.rar_used_count);
+		hw->mac.ops.set_rar(hw, rar, mc_addr, 0, IXGBE_RAH_AV);
+		hw_dbg(hw, "Added a multicast address to RAR[%d]\n", rar);
 		hw->addr_ctrl.rar_used_count++;
 		hw->addr_ctrl.mc_addr_in_rar_count++;
 	} else {
@@ -921,18 +1388,18 @@ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr)
 }
 
 /**
- *  ixgbe_update_mc_addr_list - Updates MAC list of multicast addresses
+ *  ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
  *  @hw: pointer to hardware structure
  *  @mc_addr_list: the list of new multicast addresses
  *  @mc_addr_count: number of addresses
  *  @next: iterator function to walk the multicast address list
  *
  *  The given list replaces any existing list. Clears the MC addrs from receive
- *  address registers and the multicast table. Uses unsed receive address
+ *  address registers and the multicast table. Uses unused receive address
  *  registers for the first multicast addresses, and hashes the rest into the
  *  multicast table.
  **/
-s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
 			      u32 mc_addr_count, ixgbe_mc_addr_itr next)
 {
 	u32 i;
@@ -949,7 +1416,8 @@ s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
 	hw->addr_ctrl.mta_in_use = 0;
 
 	/* Zero out the other receive addresses. */
-	hw_dbg(hw, "Clearing RAR[1-15]\n");
+	hw_dbg(hw, "Clearing RAR[%d-%d]\n", hw->addr_ctrl.rar_used_count,
+	          rar_entries - 1);
 	for (i = hw->addr_ctrl.rar_used_count; i < rar_entries; i++) {
 		IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
 		IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
@@ -971,188 +1439,53 @@ s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
 		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL,
 				IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type);
 
-	hw_dbg(hw, "ixgbe_update_mc_addr_list Complete\n");
+	hw_dbg(hw, "ixgbe_update_mc_addr_list_generic Complete\n");
 	return 0;
 }
 
 /**
- *  ixgbe_clear_vfta - Clear VLAN filter table
+ *  ixgbe_enable_mc_generic - Enable multicast address in RAR
  *  @hw: pointer to hardware structure
  *
- *  Clears the VLAN filer table, and the VMDq index associated with the filter
+ *  Enables multicast address in RAR and the use of the multicast hash table.
  **/
-static s32 ixgbe_clear_vfta(struct ixgbe_hw *hw)
+s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw)
 {
-	u32 offset;
-	u32 vlanbyte;
+	u32 i;
+	u32 rar_entries = hw->mac.num_rar_entries;
+	struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
 
-	for (offset = 0; offset < hw->mac.vft_size; offset++)
-		IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+	if (a->mc_addr_in_rar_count > 0)
+		for (i = (rar_entries - a->mc_addr_in_rar_count);
+		     i < rar_entries; i++)
+			ixgbe_enable_rar(hw, i);
 
-	for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
-		for (offset = 0; offset < hw->mac.vft_size; offset++)
-			IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
-					0);
+	if (a->mta_in_use > 0)
+		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE |
+		                hw->mac.mc_filter_type);
 
 	return 0;
 }
 
 /**
- *  ixgbe_set_vfta - Set VLAN filter table
+ *  ixgbe_disable_mc_generic - Disable multicast address in RAR
  *  @hw: pointer to hardware structure
- *  @vlan: VLAN id to write to VLAN filter
- *  @vind: VMDq output index that maps queue to VLAN id in VFTA
- *  @vlan_on: boolean flag to turn on/off VLAN in VFTA
  *
- *  Turn on/off specified VLAN in the VLAN filter table.
+ *  Disables multicast address in RAR and the use of the multicast hash table.
  **/
-s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind,
-		   bool vlan_on)
+s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
 {
-	u32 VftaIndex;
-	u32 BitOffset;
-	u32 VftaReg;
-	u32 VftaByte;
-
-	/* Determine 32-bit word position in array */
-	VftaIndex = (vlan >> 5) & 0x7F;   /* upper seven bits */
-
-	/* Determine the location of the (VMD) queue index */
-	VftaByte =  ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
-	BitOffset = (vlan & 0x7) << 2;    /* lower 3 bits indicate nibble */
-
-	/* Set the nibble for VMD queue index */
-	VftaReg = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(VftaByte, VftaIndex));
-	VftaReg &= (~(0x0F << BitOffset));
-	VftaReg |= (vind << BitOffset);
-	IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(VftaByte, VftaIndex), VftaReg);
-
-	/* Determine the location of the bit for this VLAN id */
-	BitOffset = vlan & 0x1F;	   /* lower five bits */
-
-	VftaReg = IXGBE_READ_REG(hw, IXGBE_VFTA(VftaIndex));
-	if (vlan_on)
-		/* Turn on this VLAN id */
-		VftaReg |= (1 << BitOffset);
-	else
-		/* Turn off this VLAN id */
-		VftaReg &= ~(1 << BitOffset);
-	IXGBE_WRITE_REG(hw, IXGBE_VFTA(VftaIndex), VftaReg);
-
-	return 0;
-}
-
-/**
- *  ixgbe_setup_fc - Configure flow control settings
- *  @hw: pointer to hardware structure
- *  @packetbuf_num: packet buffer number (0-7)
- *
- *  Configures the flow control settings based on SW configuration.
- *  This function is used for 802.3x flow control configuration only.
- **/
-s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
-{
-	u32 frctl_reg;
-	u32 rmcs_reg;
-
-	if (packetbuf_num < 0 || packetbuf_num > 7)
-		hw_dbg(hw, "Invalid packet buffer number [%d], expected range "
-		       "is 0-7\n", packetbuf_num);
-
-	frctl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
-	frctl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
-
-	rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
-	rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
-
-	/*
-	 * 10 gig parts do not have a word in the EEPROM to determine the
-	 * default flow control setting, so we explicitly set it to full.
-	 */
-	if (hw->fc.type == ixgbe_fc_default)
-		hw->fc.type = ixgbe_fc_full;
-
-	/*
-	 * We want to save off the original Flow Control configuration just in
-	 * case we get disconnected and then reconnected into a different hub
-	 * or switch with different Flow Control capabilities.
-	 */
-	hw->fc.type = hw->fc.original_type;
-
-	/*
-	 * The possible values of the "flow_control" parameter are:
-	 * 0: Flow control is completely disabled
-	 * 1: Rx flow control is enabled (we can receive pause frames but not
-	 *    send pause frames).
-	 * 2: Tx flow control is enabled (we can send pause frames but we do not
-	 *    support receiving pause frames)
-	 * 3: Both Rx and TX flow control (symmetric) are enabled.
-	 * other: Invalid.
-	 */
-	switch (hw->fc.type) {
-	case ixgbe_fc_none:
-		break;
-	case ixgbe_fc_rx_pause:
-		/*
-		 * RX Flow control is enabled,
-		 * and TX Flow control is disabled.
-		 */
-		frctl_reg |= IXGBE_FCTRL_RFCE;
-		break;
-	case ixgbe_fc_tx_pause:
-		/*
-		 * TX Flow control is enabled, and RX Flow control is disabled,
-		 * by a software over-ride.
-		 */
-		rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
-		break;
-	case ixgbe_fc_full:
-		/*
-		 * Flow control (both RX and TX) is enabled by a software
-		 * over-ride.
-		 */
-		frctl_reg |= IXGBE_FCTRL_RFCE;
-		rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
-		break;
-	default:
-		/* We should never get here.  The value should be 0-3. */
-		hw_dbg(hw, "Flow control param set incorrectly\n");
-		break;
-	}
-
-	/* Enable 802.3x based flow control settings. */
-	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, frctl_reg);
-	IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
-
-	/*
-	 * Check for invalid software configuration, zeros are completely
-	 * invalid for all parameters used past this point, and if we enable
-	 * flow control with zero water marks, we blast flow control packets.
-	 */
-	if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) {
-		hw_dbg(hw, "Flow control structure initialized incorrectly\n");
-		return IXGBE_ERR_INVALID_LINK_SETTINGS;
-	}
+	u32 i;
+	u32 rar_entries = hw->mac.num_rar_entries;
+	struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
 
-	/*
-	 * We need to set up the Receive Threshold high and low water
-	 * marks as well as (optionally) enabling the transmission of
-	 * XON frames.
-	 */
-	if (hw->fc.type & ixgbe_fc_tx_pause) {
-		if (hw->fc.send_xon) {
-			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
-					(hw->fc.low_water | IXGBE_FCRTL_XONE));
-		} else {
-			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
-					hw->fc.low_water);
-		}
-		IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num),
-				(hw->fc.high_water)|IXGBE_FCRTH_FCEN);
-	}
+	if (a->mc_addr_in_rar_count > 0)
+		for (i = (rar_entries - a->mc_addr_in_rar_count);
+		     i < rar_entries; i++)
+			ixgbe_disable_rar(hw, i);
 
-	IXGBE_WRITE_REG(hw, IXGBE_FCTTV(0), hw->fc.pause_time);
-	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
+	if (a->mta_in_use > 0)
+		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
 
 	return 0;
 }
@@ -1168,13 +1501,24 @@ s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
  **/
 s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
 {
-	u32 ctrl;
-	s32 i;
+	u32 i;
+	u32 reg_val;
+	u32 number_of_queues;
 	s32 status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
 
-	ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
-	ctrl |= IXGBE_CTRL_GIO_DIS;
-	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+	/* Disable the receive unit by stopping each queue */
+	number_of_queues = hw->mac.max_rx_queues;
+	for (i = 0; i < number_of_queues; i++) {
+		reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
+		if (reg_val & IXGBE_RXDCTL_ENABLE) {
+			reg_val &= ~IXGBE_RXDCTL_ENABLE;
+			IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val);
+		}
+	}
+
+	reg_val = IXGBE_READ_REG(hw, IXGBE_CTRL);
+	reg_val |= IXGBE_CTRL_GIO_DIS;
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, reg_val);
 
 	for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
 		if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) {
@@ -1189,11 +1533,11 @@ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
 
 
 /**
- *  ixgbe_acquire_swfw_sync - Aquire SWFW semaphore
+ *  ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
  *  @hw: pointer to hardware structure
- *  @mask: Mask to specify wich semaphore to acquire
+ *  @mask: Mask to specify which semaphore to acquire
  *
- *  Aquires the SWFW semaphore throught the GSSR register for the specified
+ *  Acquires the SWFW semaphore thought the GSSR register for the specified
  *  function (CSR, PHY0, PHY1, EEPROM, Flash)
  **/
 s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
@@ -1235,9 +1579,9 @@ s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
 /**
  *  ixgbe_release_swfw_sync - Release SWFW semaphore
  *  @hw: pointer to hardware structure
- *  @mask: Mask to specify wich semaphore to release
+ *  @mask: Mask to specify which semaphore to release
  *
- *  Releases the SWFW semaphore throught the GSSR register for the specified
+ *  Releases the SWFW semaphore thought the GSSR register for the specified
  *  function (CSR, PHY0, PHY1, EEPROM, Flash)
  **/
 void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask)
@@ -1254,45 +1598,3 @@ void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask)
 	ixgbe_release_eeprom_semaphore(hw);
 }
 
-/**
- *  ixgbe_read_analog_reg8 - Reads 8 bit Atlas analog register
- *  @hw: pointer to hardware structure
- *  @reg: analog register to read
- *  @val: read value
- *
- *  Performs write operation to analog register specified.
- **/
-s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val)
-{
-	u32  atlas_ctl;
-
-	IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
-			IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
-	IXGBE_WRITE_FLUSH(hw);
-	udelay(10);
-	atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
-	*val = (u8)atlas_ctl;
-
-	return 0;
-}
-
-/**
- *  ixgbe_write_analog_reg8 - Writes 8 bit Atlas analog register
- *  @hw: pointer to hardware structure
- *  @reg: atlas register to write
- *  @val: value to write
- *
- *  Performs write operation to Atlas analog register specified.
- **/
-s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val)
-{
-	u32  atlas_ctl;
-
-	atlas_ctl = (reg << 8) | val;
-	IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
-	IXGBE_WRITE_FLUSH(hw);
-	udelay(10);
-
-	return 0;
-}
-