aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/qlge
diff options
context:
space:
mode:
authorRon Mercer <ron.mercer@qlogic.com>2009-10-28 08:39:20 +0000
committerDavid S. Miller <davem@davemloft.net>2009-10-29 01:17:14 -0700
commit6d190c6edf42a572485cf1b6c7479bfc42753084 (patch)
treee4688decb302c4a0f17f9d143c6cd16c856c9c7f /drivers/net/qlge
parent55888dfb6ba7e318bb3d6a44d25009906206bf6a (diff)
qlge: Fix EEH handling.
Clean up driver resources without touch the hardware. Add pci save/restore state. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/qlge')
-rw-r--r--drivers/net/qlge/qlge_main.c78
1 files changed, 52 insertions, 26 deletions
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 48b45df85ec..cea7531f4f4 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3916,6 +3916,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
goto err_out;
}
+ pci_save_state(pdev);
qdev->reg_base =
ioremap_nocache(pci_resource_start(pdev, 1),
pci_resource_len(pdev, 1));
@@ -4070,6 +4071,33 @@ static void __devexit qlge_remove(struct pci_dev *pdev)
free_netdev(ndev);
}
+/* Clean up resources without touching hardware. */
+static void ql_eeh_close(struct net_device *ndev)
+{
+ int i;
+ struct ql_adapter *qdev = netdev_priv(ndev);
+
+ if (netif_carrier_ok(ndev)) {
+ netif_carrier_off(ndev);
+ netif_stop_queue(ndev);
+ }
+
+ if (test_bit(QL_ADAPTER_UP, &qdev->flags))
+ cancel_delayed_work_sync(&qdev->asic_reset_work);
+ cancel_delayed_work_sync(&qdev->mpi_reset_work);
+ cancel_delayed_work_sync(&qdev->mpi_work);
+ cancel_delayed_work_sync(&qdev->mpi_idc_work);
+ cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
+
+ for (i = 0; i < qdev->rss_ring_count; i++)
+ netif_napi_del(&qdev->rx_ring[i].napi);
+
+ clear_bit(QL_ADAPTER_UP, &qdev->flags);
+ ql_tx_ring_clean(qdev);
+ ql_free_rx_buffers(qdev);
+ ql_release_adapter_resources(qdev);
+}
+
/*
* This callback is called by the PCI subsystem whenever
* a PCI bus error is detected.
@@ -4078,17 +4106,21 @@ static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev,
enum pci_channel_state state)
{
struct net_device *ndev = pci_get_drvdata(pdev);
- struct ql_adapter *qdev = netdev_priv(ndev);
-
- netif_device_detach(ndev);
- if (state == pci_channel_io_perm_failure)
+ switch (state) {
+ case pci_channel_io_normal:
+ return PCI_ERS_RESULT_CAN_RECOVER;
+ case pci_channel_io_frozen:
+ netif_device_detach(ndev);
+ if (netif_running(ndev))
+ ql_eeh_close(ndev);
+ pci_disable_device(pdev);
+ return PCI_ERS_RESULT_NEED_RESET;
+ case pci_channel_io_perm_failure:
+ dev_err(&pdev->dev,
+ "%s: pci_channel_io_perm_failure.\n", __func__);
return PCI_ERS_RESULT_DISCONNECT;
-
- if (netif_running(ndev))
- ql_adapter_down(qdev);
-
- pci_disable_device(pdev);
+ }
/* Request a slot reset. */
return PCI_ERS_RESULT_NEED_RESET;
@@ -4105,25 +4137,15 @@ static pci_ers_result_t qlge_io_slot_reset(struct pci_dev *pdev)
struct net_device *ndev = pci_get_drvdata(pdev);
struct ql_adapter *qdev = netdev_priv(ndev);
+ pdev->error_state = pci_channel_io_normal;
+
+ pci_restore_state(pdev);
if (pci_enable_device(pdev)) {
QPRINTK(qdev, IFUP, ERR,
"Cannot re-enable PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
}
-
pci_set_master(pdev);
-
- netif_carrier_off(ndev);
- ql_adapter_reset(qdev);
-
- /* Make sure the EEPROM is good */
- memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
-
- if (!is_valid_ether_addr(ndev->perm_addr)) {
- QPRINTK(qdev, IFUP, ERR, "After reset, invalid MAC address.\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
-
return PCI_ERS_RESULT_RECOVERED;
}
@@ -4131,17 +4153,21 @@ static void qlge_io_resume(struct pci_dev *pdev)
{
struct net_device *ndev = pci_get_drvdata(pdev);
struct ql_adapter *qdev = netdev_priv(ndev);
+ int err = 0;
- pci_set_master(pdev);
-
+ if (ql_adapter_reset(qdev))
+ QPRINTK(qdev, DRV, ERR, "reset FAILED!\n");
if (netif_running(ndev)) {
- if (ql_adapter_up(qdev)) {
+ err = qlge_open(ndev);
+ if (err) {
QPRINTK(qdev, IFUP, ERR,
"Device initialization failed after reset.\n");
return;
}
+ } else {
+ QPRINTK(qdev, IFUP, ERR,
+ "Device was not running prior to EEH.\n");
}
-
netif_device_attach(ndev);
}