Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	drivers/net/benet/be_cmds.h
	include/linux/sysctl.h

10 files changed, 369 insertions, 153 deletions

diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 3591cc9c39c..62d5cd51a9d 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -741,14 +741,14 @@ static int efx_probe_port(struct efx_nic *efx)
 
 	EFX_LOG(efx, "create port\n");
 
+	if (phy_flash_cfg)
+		efx->phy_mode = PHY_MODE_SPECIAL;
+
 	/* Connect up MAC/PHY operations table */
 	rc = efx->type->probe_port(efx);
 	if (rc)
 		goto err;
 
-	if (phy_flash_cfg)
-		efx->phy_mode = PHY_MODE_SPECIAL;
-
 	/* Sanity check MAC address */
 	if (is_valid_ether_addr(efx->mac_address)) {
 		memcpy(efx->net_dev->dev_addr, efx->mac_address, ETH_ALEN);
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 17afcd26e87..9d009c46e96 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -925,6 +925,7 @@ static int falcon_probe_port(struct efx_nic *efx)
 
 static void falcon_remove_port(struct efx_nic *efx)
 {
+	efx->phy_op->remove(efx);
 	efx_nic_free_buffer(efx, &efx->stats_buffer);
 }
 
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index 3da933f8f07..8ccab2c67a2 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -111,16 +111,12 @@ static void falcon_mask_status_intr(struct efx_nic *efx, bool enable)
 	efx_writeo(efx, &reg, FR_AB_XM_MGT_INT_MASK);
 }
 
-/* Get status of XAUI link */
-static bool falcon_xaui_link_ok(struct efx_nic *efx)
+static bool falcon_xgxs_link_ok(struct efx_nic *efx)
 {
 	efx_oword_t reg;
 	bool align_done, link_ok = false;
 	int sync_status;
 
-	if (LOOPBACK_INTERNAL(efx))
-		return true;
-
 	/* Read link status */
 	efx_reado(efx, &reg, FR_AB_XX_CORE_STAT);
 
@@ -135,14 +131,24 @@ static bool falcon_xaui_link_ok(struct efx_nic *efx)
 	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_DISPERR, FFE_AB_XX_STAT_ALL_LANES);
 	efx_writeo(efx, &reg, FR_AB_XX_CORE_STAT);
 
-	/* If the link is up, then check the phy side of the xaui link */
-	if (efx->link_state.up && link_ok)
-		if (efx->mdio.mmds & (1 << MDIO_MMD_PHYXS))
-			link_ok = efx_mdio_phyxgxs_lane_sync(efx);
-
 	return link_ok;
 }
 
+static bool falcon_xmac_link_ok(struct efx_nic *efx)
+{
+	/*
+	 * Check MAC's XGXS link status except when using XGMII loopback
+	 * which bypasses the XGXS block.
+	 * If possible, check PHY's XGXS link status except when using
+	 * MAC loopback.
+	 */
+	return (efx->loopback_mode == LOOPBACK_XGMII ||
+		falcon_xgxs_link_ok(efx)) &&
+		(!(efx->mdio.mmds & (1 << MDIO_MMD_PHYXS)) ||
+		 LOOPBACK_INTERNAL(efx) || 
+		 efx_mdio_phyxgxs_lane_sync(efx));
+}
+
 void falcon_reconfigure_xmac_core(struct efx_nic *efx)
 {
 	unsigned int max_frame_len;
@@ -245,9 +251,9 @@ static void falcon_reconfigure_xgxs_core(struct efx_nic *efx)
 
 
 /* Try to bring up the Falcon side of the Falcon-Phy XAUI link */
-static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries)
+static bool falcon_xmac_link_ok_retry(struct efx_nic *efx, int tries)
 {
-	bool mac_up = falcon_xaui_link_ok(efx);
+	bool mac_up = falcon_xmac_link_ok(efx);
 
 	if (LOOPBACK_MASK(efx) & LOOPBACKS_EXTERNAL(efx) & LOOPBACKS_WS ||
 	    efx_phy_mode_disabled(efx->phy_mode))
@@ -261,7 +267,7 @@ static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries)
 		falcon_reset_xaui(efx);
 		udelay(200);
 
-		mac_up = falcon_xaui_link_ok(efx);
+		mac_up = falcon_xmac_link_ok(efx);
 		--tries;
 	}
 
@@ -272,7 +278,7 @@ static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries)
 
 static bool falcon_xmac_check_fault(struct efx_nic *efx)
 {
-	return !falcon_check_xaui_link_up(efx, 5);
+	return !falcon_xmac_link_ok_retry(efx, 5);
 }
 
 static int falcon_reconfigure_xmac(struct efx_nic *efx)
@@ -284,7 +290,7 @@ static int falcon_reconfigure_xmac(struct efx_nic *efx)
 
 	falcon_reconfigure_mac_wrapper(efx);
 
-	efx->xmac_poll_required = !falcon_check_xaui_link_up(efx, 5);
+	efx->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 5);
 	falcon_mask_status_intr(efx, true);
 
 	return 0;
@@ -357,7 +363,7 @@ void falcon_poll_xmac(struct efx_nic *efx)
 		return;
 
 	falcon_mask_status_intr(efx, false);
-	efx->xmac_poll_required = !falcon_check_xaui_link_up(efx, 1);
+	efx->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 1);
 	falcon_mask_status_intr(efx, true);
 }
 
diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/sfc/mcdi_phy.c
index 0e1bcc5a0d5..eb694af7a47 100644
--- a/drivers/net/sfc/mcdi_phy.c
+++ b/drivers/net/sfc/mcdi_phy.c
@@ -304,31 +304,47 @@ static u32 mcdi_to_ethtool_media(u32 media)
 
 static int efx_mcdi_phy_probe(struct efx_nic *efx)
 {
-	struct efx_mcdi_phy_cfg *phy_cfg;
+	struct efx_mcdi_phy_cfg *phy_data;
+	u8 outbuf[MC_CMD_GET_LINK_OUT_LEN];
+	u32 caps;
 	int rc;
 
-	/* TODO: Move phy_data initialisation to
-	 * phy_op->probe/remove, rather than init/fini */
-	phy_cfg = kzalloc(sizeof(*phy_cfg), GFP_KERNEL);
-	if (phy_cfg == NULL) {
-		rc = -ENOMEM;
-		goto fail_alloc;
-	}
-	rc = efx_mcdi_get_phy_cfg(efx, phy_cfg);
+	/* Initialise and populate phy_data */
+	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
+	if (phy_data == NULL)
+		return -ENOMEM;
+
+	rc = efx_mcdi_get_phy_cfg(efx, phy_data);
 	if (rc != 0)
 		goto fail;
 
-	efx->phy_type = phy_cfg->type;
+	/* Read initial link advertisement */
+	BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
+	rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
+			  outbuf, sizeof(outbuf), NULL);
+	if (rc)
+		goto fail;
+
+	/* Fill out nic state */
+	efx->phy_data = phy_data;
+	efx->phy_type = phy_data->type;
 
-	efx->mdio_bus = phy_cfg->channel;
-	efx->mdio.prtad = phy_cfg->port;
-	efx->mdio.mmds = phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22);
+	efx->mdio_bus = phy_data->channel;
+	efx->mdio.prtad = phy_data->port;
+	efx->mdio.mmds = phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22);
 	efx->mdio.mode_support = 0;
-	if (phy_cfg->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22))
+	if (phy_data->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22))
 		efx->mdio.mode_support |= MDIO_SUPPORTS_C22;
-	if (phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22))
+	if (phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22))
 		efx->mdio.mode_support |= MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
 
+	caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP);
+	if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN))
+		efx->link_advertising =
+			mcdi_to_ethtool_cap(phy_data->media, caps);
+	else
+		phy_data->forced_cap = caps;
+
 	/* Assert that we can map efx -> mcdi loopback modes */
 	BUILD_BUG_ON(LOOPBACK_NONE != MC_CMD_LOOPBACK_NONE);
 	BUILD_BUG_ON(LOOPBACK_DATA != MC_CMD_LOOPBACK_DATA);
@@ -365,46 +381,6 @@ static int efx_mcdi_phy_probe(struct efx_nic *efx)
 	 * but by convention we don't */
 	efx->loopback_modes &= ~(1 << LOOPBACK_NONE);
 
-	kfree(phy_cfg);
-
-	return 0;
-
-fail:
-	kfree(phy_cfg);
-fail_alloc:
-	return rc;
-}
-
-static int efx_mcdi_phy_init(struct efx_nic *efx)
-{
-	struct efx_mcdi_phy_cfg *phy_data;
-	u8 outbuf[MC_CMD_GET_LINK_OUT_LEN];
-	u32 caps;
-	int rc;
-
-	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
-	if (phy_data == NULL)
-		return -ENOMEM;
-
-	rc = efx_mcdi_get_phy_cfg(efx, phy_data);
-	if (rc != 0)
-		goto fail;
-
-	efx->phy_data = phy_data;
-
-	BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
-	rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
-			  outbuf, sizeof(outbuf), NULL);
-	if (rc)
-		goto fail;
-
-	caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP);
-	if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN))
-		efx->link_advertising =
-			mcdi_to_ethtool_cap(phy_data->media, caps);
-	else
-		phy_data->forced_cap = caps;
-
 	return 0;
 
 fail:
@@ -504,7 +480,7 @@ static bool efx_mcdi_phy_poll(struct efx_nic *efx)
 	return !efx_link_state_equal(&efx->link_state, &old_state);
 }
 
-static void efx_mcdi_phy_fini(struct efx_nic *efx)
+static void efx_mcdi_phy_remove(struct efx_nic *efx)
 {
 	struct efx_mcdi_phy_data *phy_data = efx->phy_data;
 
@@ -586,10 +562,11 @@ static int efx_mcdi_phy_set_settings(struct efx_nic *efx, struct ethtool_cmd *ec
 
 struct efx_phy_operations efx_mcdi_phy_ops = {
 	.probe		= efx_mcdi_phy_probe,
-	.init 	 	= efx_mcdi_phy_init,
+	.init 	 	= efx_port_dummy_op_int,
 	.reconfigure	= efx_mcdi_phy_reconfigure,
 	.poll		= efx_mcdi_phy_poll,
-	.fini		= efx_mcdi_phy_fini,
+	.fini		= efx_port_dummy_op_void,
+	.remove		= efx_mcdi_phy_remove,
 	.get_settings	= efx_mcdi_phy_get_settings,
 	.set_settings	= efx_mcdi_phy_set_settings,
 	.run_tests	= NULL,
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 34c381f009b..d5aab5b3fa0 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -524,6 +524,7 @@ struct efx_phy_operations {
 	int (*probe) (struct efx_nic *efx);
 	int (*init) (struct efx_nic *efx);
 	void (*fini) (struct efx_nic *efx);
+	void (*remove) (struct efx_nic *efx);
 	int (*reconfigure) (struct efx_nic *efx);
 	bool (*poll) (struct efx_nic *efx);
 	void (*get_settings) (struct efx_nic *efx,
diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c
index a577be22786..db44224ed2c 100644
--- a/drivers/net/sfc/nic.c
+++ b/drivers/net/sfc/nic.c
@@ -1576,6 +1576,8 @@ void efx_nic_init_common(struct efx_nic *efx)
 	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_SOFT_EVT_EN, 1);
 	/* Prefetch threshold 2 => fetch when descriptor cache half empty */
 	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PREF_THRESHOLD, 2);
+	/* Disable hardware watchdog which can misfire */
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PREF_WD_TMR, 0x3fffff);
 	/* Squash TX of packets of 16 bytes or less */
 	if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0)
 		EFX_SET_OWORD_FIELD(temp, FRF_BZ_TX_FLUSH_MIN_LEN_EN, 1);
diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
index 3800fc791b2..ff8f0a417fa 100644
--- a/drivers/net/sfc/qt202x_phy.c
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -33,6 +33,9 @@
 #define PCS_FW_HEARTBEAT_REG	0xd7ee
 #define PCS_FW_HEARTB_LBN	0
 #define PCS_FW_HEARTB_WIDTH	8
+#define PCS_FW_PRODUCT_CODE_1	0xd7f0
+#define PCS_FW_VERSION_1	0xd7f3
+#define PCS_FW_BUILD_1		0xd7f6
 #define PCS_UC8051_STATUS_REG	0xd7fd
 #define PCS_UC_STATUS_LBN	0
 #define PCS_UC_STATUS_WIDTH	8
@@ -52,14 +55,24 @@ void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode)
 
 struct qt202x_phy_data {
 	enum efx_phy_mode phy_mode;
+	bool bug17190_in_bad_state;
+	unsigned long bug17190_timer;
+	u32 firmware_ver;
 };
 
 #define QT2022C2_MAX_RESET_TIME 500
 #define QT2022C2_RESET_WAIT 10
 
-static int qt2025c_wait_reset(struct efx_nic *efx)
+#define QT2025C_MAX_HEARTB_TIME (5 * HZ)
+#define QT2025C_HEARTB_WAIT 100
+#define QT2025C_MAX_FWSTART_TIME (25 * HZ / 10)
+#define QT2025C_FWSTART_WAIT 100
+
+#define BUG17190_INTERVAL (2 * HZ)
+
+static int qt2025c_wait_heartbeat(struct efx_nic *efx)
 {
-	unsigned long timeout = jiffies + 10 * HZ;
+	unsigned long timeout = jiffies + QT2025C_MAX_HEARTB_TIME;
 	int reg, old_counter = 0;
 
 	/* Wait for firmware heartbeat to start */
@@ -74,11 +87,25 @@ static int qt2025c_wait_reset(struct efx_nic *efx)
 			old_counter = counter;
 		else if (counter != old_counter)
 			break;
-		if (time_after(jiffies, timeout))
+		if (time_after(jiffies, timeout)) {
+			/* Some cables have EEPROMs that conflict with the
+			 * PHY's on-board EEPROM so it cannot load firmware */
+			EFX_ERR(efx, "If an SFP+ direct attach cable is"
+				" connected, please check that it complies"
+				" with the SFP+ specification\n");
 			return -ETIMEDOUT;
-		msleep(10);
+		}
+		msleep(QT2025C_HEARTB_WAIT);
 	}
 
+	return 0;
+}
+
+static int qt2025c_wait_fw_status_good(struct efx_nic *efx)
+{
+	unsigned long timeout = jiffies + QT2025C_MAX_FWSTART_TIME;
+	int reg;
+
 	/* Wait for firmware status to look good */
 	for (;;) {
 		reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG);
@@ -90,7 +117,178 @@ static int qt2025c_wait_reset(struct efx_nic *efx)
 			break;
 		if (time_after(jiffies, timeout))
 			return -ETIMEDOUT;
+		msleep(QT2025C_FWSTART_WAIT);
+	}
+
+	return 0;
+}
+
+static void qt2025c_restart_firmware(struct efx_nic *efx)
+{
+	/* Restart microcontroller execution of firmware from RAM */
+	efx_mdio_write(efx, 3, 0xe854, 0x00c0);
+	efx_mdio_write(efx, 3, 0xe854, 0x0040);
+	msleep(50);
+}
+
+static int qt2025c_wait_reset(struct efx_nic *efx)
+{
+	int rc;
+
+	rc = qt2025c_wait_heartbeat(efx);
+	if (rc != 0)
+		return rc;
+
+	rc = qt2025c_wait_fw_status_good(efx);
+	if (rc == -ETIMEDOUT) {
+		/* Bug 17689: occasionally heartbeat starts but firmware status
+		 * code never progresses beyond 0x00.  Try again, once, after
+		 * restarting execution of the firmware image. */
+		EFX_LOG(efx, "bashing QT2025C microcontroller\n");
+		qt2025c_restart_firmware(efx);
+		rc = qt2025c_wait_heartbeat(efx);
+		if (rc != 0)
+			return rc;
+		rc = qt2025c_wait_fw_status_good(efx);
+	}
+
+	return rc;
+}
+
+static void qt2025c_firmware_id(struct efx_nic *efx)
+{
+	struct qt202x_phy_data *phy_data = efx->phy_data;
+	u8 firmware_id[9];
+	size_t i;
+
+	for (i = 0; i < sizeof(firmware_id); i++)
+		firmware_id[i] = efx_mdio_read(efx, MDIO_MMD_PCS,
+					       PCS_FW_PRODUCT_CODE_1 + i);
+	EFX_INFO(efx, "QT2025C firmware %xr%d v%d.%d.%d.%d [20%02d-%02d-%02d]\n",
+		 (firmware_id[0] << 8) | firmware_id[1], firmware_id[2],
+		 firmware_id[3] >> 4, firmware_id[3] & 0xf,
+		 firmware_id[4], firmware_id[5],
+		 firmware_id[6], firmware_id[7], firmware_id[8]);
+	phy_data->firmware_ver = ((firmware_id[3] & 0xf0) << 20) |
+				 ((firmware_id[3] & 0x0f) << 16) |
+				 (firmware_id[4] << 8) | firmware_id[5];
+}
+
+static void qt2025c_bug17190_workaround(struct efx_nic *efx)
+{
+	struct qt202x_phy_data *phy_data = efx->phy_data;
+
+	/* The PHY can get stuck in a state where it reports PHY_XS and PMA/PMD
+	 * layers up, but PCS down (no block_lock).  If we notice this state
+	 * persisting for a couple of seconds, we switch PMA/PMD loopback
+	 * briefly on and then off again, which is normally sufficient to
+	 * recover it.
+	 */
+	if (efx->link_state.up ||
+	    !efx_mdio_links_ok(efx, MDIO_DEVS_PMAPMD | MDIO_DEVS_PHYXS)) {
+		phy_data->bug17190_in_bad_state = false;
+		return;
+	}
+
+	if (!phy_data->bug17190_in_bad_state) {
+		phy_data->bug17190_in_bad_state = true;
+		phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL;
+		return;
+	}
+
+	if (time_after_eq(jiffies, phy_data->bug17190_timer)) {
+		EFX_LOG(efx, "bashing QT2025C PMA/PMD\n");
+		efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+				  MDIO_PMA_CTRL1_LOOPBACK, true);
 		msleep(100);
+		efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+				  MDIO_PMA_CTRL1_LOOPBACK, false);
+		phy_data->bug17190_timer = jiffies + BUG17190_INTERVAL;
+	}
+}
+
+static int qt2025c_select_phy_mode(struct efx_nic *efx)
+{
+	struct qt202x_phy_data *phy_data = efx->phy_data;
+	struct falcon_board *board = falcon_board(efx);
+	int reg, rc, i;
+	uint16_t phy_op_mode;
+
+	/* Only 2.0.1.0+ PHY firmware supports the more optimal SFP+
+	 * Self-Configure mode.  Don't attempt any switching if we encounter
+	 * older firmware. */
+	if (phy_data->firmware_ver < 0x02000100)
+		return 0;
+
+	/* In general we will get optimal behaviour in "SFP+ Self-Configure"
+	 * mode; however, that powers down most of the PHY when no module is
+	 * present, so we must use a different mode (any fixed mode will do)
+	 * to be sure that loopbacks will work. */
+	phy_op_mode = (efx->loopback_mode == LOOPBACK_NONE) ? 0x0038 : 0x0020;
+
+	/* Only change mode if really necessary */
+	reg = efx_mdio_read(efx, 1, 0xc319);
+	if ((reg & 0x0038) == phy_op_mode)
+		return 0;
+	EFX_LOG(efx, "Switching PHY to mode 0x%04x\n", phy_op_mode);
+
+	/* This sequence replicates the register writes configured in the boot
+	 * EEPROM (including the differences between board revisions), except
+	 * that the operating mode is changed, and the PHY is prevented from
+	 * unnecessarily reloading the main firmware image again. */
+	efx_mdio_write(efx, 1, 0xc300, 0x0000);
+	/* (Note: this portion of the boot EEPROM sequence, which bit-bashes 9
+	 * STOPs onto the firmware/module I2C bus to reset it, varies across
+	 * board revisions, as the bus is connected to different GPIO/LED
+	 * outputs on the PHY.) */
+	if (board->major == 0 && board->minor < 2) {
+		efx_mdio_write(efx, 1, 0xc303, 0x4498);
+		for (i = 0; i < 9; i++) {
+			efx_mdio_write(efx, 1, 0xc303, 0x4488);
+			efx_mdio_write(efx, 1, 0xc303, 0x4480);
+			efx_mdio_write(efx, 1, 0xc303, 0x4490);
+			efx_mdio_write(efx, 1, 0xc303, 0x4498);
+		}
+	} else {
+		efx_mdio_write(efx, 1, 0xc303, 0x0920);
+		efx_mdio_write(efx, 1, 0xd008, 0x0004);
+		for (i = 0; i < 9; i++) {
+			efx_mdio_write(efx, 1, 0xc303, 0x0900);
+			efx_mdio_write(efx, 1, 0xd008, 0x0005);
+			efx_mdio_write(efx, 1, 0xc303, 0x0920);
+			efx_mdio_write(efx, 1, 0xd008, 0x0004);
+		}
+		efx_mdio_write(efx, 1, 0xc303, 0x4900);
+	}
+	efx_mdio_write(efx, 1, 0xc303, 0x4900);
+	efx_mdio_write(efx, 1, 0xc302, 0x0004);
+	efx_mdio_write(efx, 1, 0xc316, 0x0013);
+	efx_mdio_write(efx, 1, 0xc318, 0x0054);
+	efx_mdio_write(efx, 1, 0xc319, phy_op_mode);
+	efx_mdio_write(efx, 1, 0xc31a, 0x0098);
+	efx_mdio_write(efx, 3, 0x0026, 0x0e00);
+	efx_mdio_write(efx, 3, 0x0027, 0x0013);
+	efx_mdio_write(efx, 3, 0x0028, 0xa528);
+	efx_mdio_write(efx, 1, 0xd006, 0x000a);
+	efx_mdio_write(efx, 1, 0xd007, 0x0009);
+	efx_mdio_write(efx, 1, 0xd008, 0x0004);
+	/* This additional write is not present in the boot EEPROM.  It
+	 * prevents the PHY's internal boot ROM doing another pointless (and
+	 * slow) reload of the firmware image (the microcontroller's code
+	 * memory is not affected by the microcontroller reset). */
+	efx_mdio_write(efx, 1, 0xc317, 0x00ff);
+	efx_mdio_write(efx, 1, 0xc300, 0x0002);
+	msleep(20);
+
+	/* Restart microcontroller execution of firmware from RAM */
+	qt2025c_restart_firmware(efx);
+
+	/* Wait for the microcontroller to be ready again */
+	rc = qt2025c_wait_reset(efx);
+	if (rc < 0) {
+		EFX_ERR(efx, "PHY microcontroller reset during mode switch "
+				"timed out\n");
+		return rc;
 	}
 
 	return 0;
@@ -137,6 +335,16 @@ static int qt202x_reset_phy(struct efx_nic *efx)
 
 static int qt202x_phy_probe(struct efx_nic *efx)
 {
+	struct qt202x_phy_data *phy_data;
+
+	phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
+	if (!phy_data)
+		return -ENOMEM;
+	efx->phy_data = phy_data;
+	phy_data->phy_mode = efx->phy_mode;
+	phy_data->bug17190_in_bad_state = false;
+	phy_data->bug17190_timer = 0;
+
 	efx->mdio.mmds = QT202X_REQUIRED_DEVS;
 	efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
 	efx->loopback_modes = QT202X_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
@@ -145,7 +353,6 @@ static int qt202x_phy_probe(struct efx_nic *efx)
 
 static int qt202x_phy_init(struct efx_nic *efx)
 {
-	struct qt202x_phy_data *phy_data;
 	u32 devid;
 	int rc;
 
@@ -155,17 +362,14 @@ static int qt202x_phy_init(struct efx_nic *efx)
 		return rc;
 	}
 
-	phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
-	if (!phy_data)
-		return -ENOMEM;
-	efx->phy_data = phy_data;
-
 	devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
 	EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
 		 devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
 		 efx_mdio_id_rev(devid));
 
-	phy_data->phy_mode = efx->phy_mode;
+	if (efx->phy_type == PHY_TYPE_QT2025C)
+		qt2025c_firmware_id(efx);
+
 	return 0;
 }
 
@@ -183,6 +387,9 @@ static bool qt202x_phy_poll(struct efx_nic *efx)
 	efx->link_state.fd = true;
 	efx->link_state.fc = efx->wanted_fc;
 
+	if (efx->phy_type == PHY_TYPE_QT2025C)
+		qt2025c_bug17190_workaround(efx);
+
 	return efx->link_state.up != was_up;
 }
 
@@ -191,6 +398,10 @@ static int qt202x_phy_reconfigure(struct efx_nic *efx)
 	struct qt202x_phy_data *phy_data = efx->phy_data;
 
 	if (efx->phy_type == PHY_TYPE_QT2025C) {
+		int rc = qt2025c_select_phy_mode(efx);
+		if (rc)
+			return rc;
+
 		/* There are several different register bits which can
 		 * disable TX (and save power) on direct-attach cables
 		 * or optical transceivers, varying somewhat between
@@ -224,7 +435,7 @@ static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecm
 	mdio45_ethtool_gset(&efx->mdio, ecmd);
 }
 
-static void qt202x_phy_fini(struct efx_nic *efx)
+static void qt202x_phy_remove(struct efx_nic *efx)
 {
 	/* Free the context block */
 	kfree(efx->phy_data);
@@ -236,7 +447,8 @@ struct efx_phy_operations falcon_qt202x_phy_ops = {
 	.init		 = qt202x_phy_init,
 	.reconfigure	 = qt202x_phy_reconfigure,
 	.poll	     	 = qt202x_phy_poll,
-	.fini	  	 = qt202x_phy_fini,
+	.fini		 = efx_port_dummy_op_void,
+	.remove	  	 = qt202x_phy_remove,
 	.get_settings	 = qt202x_phy_get_settings,
 	.set_settings	 = efx_mdio_set_settings,
 };
diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c
index de07a4f031b..f8c6771e66d 100644
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -133,6 +133,7 @@ static int siena_probe_port(struct efx_nic *efx)
 
 void siena_remove_port(struct efx_nic *efx)
 {
+	efx->phy_op->remove(efx);
 	efx_nic_free_buffer(efx, &efx->stats_buffer);
 }
 
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index ca11572a49a..3009c297c13 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -202,10 +202,14 @@ static ssize_t set_phy_short_reach(struct device *dev,
 	int rc;
 
 	rtnl_lock();
-	efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR,
-			  MDIO_PMA_10GBT_TXPWR_SHORT,
-			  count != 0 && *buf != '0');
-	rc = efx_reconfigure_port(efx);
+	if (efx->state != STATE_RUNNING) {
+		rc = -EBUSY;
+	} else {
+		efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR,
+				  MDIO_PMA_10GBT_TXPWR_SHORT,
+				  count != 0 && *buf != '0');
+		rc = efx_reconfigure_port(efx);
+	}
 	rtnl_unlock();
 
 	return rc < 0 ? rc : (ssize_t)count;
@@ -298,36 +302,62 @@ static int tenxpress_init(struct efx_nic *efx)
 	return 0;
 }
 
-static int sfx7101_phy_probe(struct efx_nic *efx)
+static int tenxpress_phy_probe(struct efx_nic *efx)
 {
-	efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
-	efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
-	efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
-	return 0;
-}
+	struct tenxpress_phy_data *phy_data;
+	int rc;
+
+	/* Allocate phy private storage */
+	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
+	if (!phy_data)
+		return -ENOMEM;
+	efx->phy_data = phy_data;
+	phy_data->phy_mode = efx->phy_mode;
+
+	/* Create any special files */
+	if (efx->phy_type == PHY_TYPE_SFT9001B) {
+		rc = device_create_file(&efx->pci_dev->dev,
+					&dev_attr_phy_short_reach);
+		if (rc)
+			goto fail;
+	}
+
+	if (efx->phy_type == PHY_TYPE_SFX7101) {
+		efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
+		efx->mdio.mode_support = MDIO_SUPPORTS_C45;
+
+		efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
+
+		efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
+					 ADVERTISED_10000baseT_Full);
+	} else {
+		efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
+		efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+
+		efx->loopback_modes = (SFT9001_LOOPBACKS |
+				       FALCON_XMAC_LOOPBACKS | 
+				       FALCON_GMAC_LOOPBACKS);
+
+		efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
+					 ADVERTISED_10000baseT_Full |
+					 ADVERTISED_1000baseT_Full |
+					 ADVERTISED_100baseT_Full);
+	}
 
-static int sft9001_phy_probe(struct efx_nic *efx)
-{
-	efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
-	efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
-	efx->loopback_modes = (SFT9001_LOOPBACKS | FALCON_XMAC_LOOPBACKS |
-			       FALCON_GMAC_LOOPBACKS);
 	return 0;
+
+fail:
+	kfree(efx->phy_data);
+	efx->phy_data = NULL;
+	return rc;
 }
 
 static int tenxpress_phy_init(struct efx_nic *efx)
 {
-	struct tenxpress_phy_data *phy_data;
-	int rc = 0;
+	int rc;
 
 	falcon_board(efx)->type->init_phy(efx);
 
-	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
-	if (!phy_data)
-		return -ENOMEM;
-	efx->phy_data = phy_data;
-	phy_data->phy_mode = efx->phy_mode;
-
 	if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
 		if (efx->phy_type == PHY_TYPE_SFT9001A) {
 			int reg;
@@ -341,44 +371,27 @@ static int tenxpress_phy_init(struct efx_nic *efx)
 
 		rc = efx_mdio_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS);
 		if (rc < 0)
-			goto fail;
+			return rc;
 
 		rc = efx_mdio_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
 		if (rc < 0)
-			goto fail;
+			return rc;
 	}
 
 	rc = tenxpress_init(efx);
 	if (rc < 0)
-		goto fail;
+		return rc;
 
-	/* Initialise advertising flags */
-	efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
-				  ADVERTISED_10000baseT_Full);
-	if (efx->phy_type != PHY_TYPE_SFX7101)
-		efx->link_advertising |= (ADVERTISED_1000baseT_Full |
-					   ADVERTISED_100baseT_Full);
+	/* Reinitialise flow control settings */
 	efx_link_set_wanted_fc(efx, efx->wanted_fc);
 	efx_mdio_an_reconfigure(efx);
 
-	if (efx->phy_type == PHY_TYPE_SFT9001B) {
-		rc = device_create_file(&efx->pci_dev->dev,
-					&dev_attr_phy_short_reach);
-		if (rc)
-			goto fail;
-	}
-
 	schedule_timeout_uninterruptible(HZ / 5); /* 200ms */
 
 	/* Let XGXS and SerDes out of reset */
 	falcon_reset_xaui(efx);
 
 	return 0;
-
- fail:
-	kfree(efx->phy_data);
-	efx->phy_data = NULL;
-	return rc;
 }
 
 /* Perform a "special software reset" on the PHY. The caller is
@@ -589,25 +602,26 @@ static bool tenxpress_phy_poll(struct efx_nic *efx)
 	return !efx_link_state_equal(&efx->link_state, &old_state);
 }
 
-static void tenxpress_phy_fini(struct efx_nic *efx)
+static void sfx7101_phy_fini(struct efx_nic *efx)
 {
 	int reg;
 
+	/* Power down the LNPGA */
+	reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
+	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
+
+	/* Waiting here ensures that the board fini, which can turn
+	 * off the power to the PHY, won't get run until the LNPGA
+	 * powerdown has been given long enough to complete. */
+	schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
+}
+
+static void tenxpress_phy_remove(struct efx_nic *efx)
+{
 	if (efx->phy_type == PHY_TYPE_SFT9001B)
 		device_remove_file(&efx->pci_dev->dev,
 				   &dev_attr_phy_short_reach);
 
-	if (efx->phy_type == PHY_TYPE_SFX7101) {
-		/* Power down the LNPGA */
-		reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
-		efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg);
-
-		/* Waiting here ensures that the board fini, which can turn
-		 * off the power to the PHY, won't get run until the LNPGA
-		 * powerdown has been given long enough to complete. */
-		schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
-	}
-
 	kfree(efx->phy_data);
 	efx->phy_data = NULL;
 }
@@ -819,11 +833,12 @@ static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising)
 }
 
 struct efx_phy_operations falcon_sfx7101_phy_ops = {
-	.probe		  = sfx7101_phy_probe,
+	.probe		  = tenxpress_phy_probe,
 	.init             = tenxpress_phy_init,
 	.reconfigure      = tenxpress_phy_reconfigure,
 	.poll             = tenxpress_phy_poll,
-	.fini             = tenxpress_phy_fini,
+	.fini             = sfx7101_phy_fini,
+	.remove		  = tenxpress_phy_remove,
 	.get_settings	  = tenxpress_get_settings,
 	.set_settings	  = tenxpress_set_settings,
 	.set_npage_adv    = sfx7101_set_npage_adv,
@@ -832,11 +847,12 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = {
 };
 
 struct efx_phy_operations falcon_sft9001_phy_ops = {
-	.probe		  = sft9001_phy_probe,
+	.probe		  = tenxpress_phy_probe,
 	.init             = tenxpress_phy_init,
 	.reconfigure      = tenxpress_phy_reconfigure,
 	.poll             = tenxpress_phy_poll,
-	.fini             = tenxpress_phy_fini,
+	.fini             = efx_port_dummy_op_void,
+	.remove		  = tenxpress_phy_remove,
 	.get_settings	  = tenxpress_get_settings,
 	.set_settings	  = tenxpress_set_settings,
 	.set_npage_adv    = sft9001_set_npage_adv,
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index e669f94e821..a8b70ef6d81 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -821,8 +821,6 @@ static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue)
 					   EFX_TXQ_MASK];
 		efx_tsoh_free(tx_queue, buffer);
 		EFX_BUG_ON_PARANOID(buffer->skb);
-		buffer->len = 0;
-		buffer->continuation = true;
 		if (buffer->unmap_len) {
 			unmap_addr = (buffer->dma_addr + buffer->len -
 				      buffer->unmap_len);
@@ -836,6 +834,8 @@ static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue)
 					       PCI_DMA_TODEVICE);
 			buffer->unmap_len = 0;
 		}
+		buffer->len = 0;
+		buffer->continuation = true;
 	}
 }