diff options
author | Stephen Hemminger <shemminger@linux-foundation.org> | 2007-04-11 14:48:01 -0700 |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2007-04-19 15:01:17 -0400 |
commit | b628ed986d681c708aec64418c2c7f6a6b715855 (patch) | |
tree | 6ade1dbf518f3b1605046b8f3ee36bf988c393a6 /drivers/net/sky2.c | |
parent | 4f44d8ba09280a7f0887ab60277940d6c72f2b43 (diff) |
sky2: EC-U performance and jumbo support
The Yukon EC Ultra chips have transmit settings for store and
forward and PCI buffering. By setting these appropriately, normal
performance goes from 750Mbytes/sec to 940Mbytes/sec (non-jumbo).
It is also possible to do Jumbo mode, but it means turning off
TSO and checksum offload so the performance gets worse. There isn't
enough buffering for checksum offload to work.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/net/sky2.c')
-rw-r--r-- | drivers/net/sky2.c | 85 |
1 files changed, 60 insertions, 25 deletions
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 910c600a6ca..4d1ec78c437 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -743,12 +743,17 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) { sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8); sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8); - if (hw->dev[port]->mtu > ETH_DATA_LEN) { - /* set Tx GMAC FIFO Almost Empty Threshold */ - sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), 0x180); - /* Disable Store & Forward mode for TX */ - sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_STFW_DIS); - } + + /* set Tx GMAC FIFO Almost Empty Threshold */ + sky2_write32(hw, SK_REG(port, TX_GMF_AE_THR), + (ECU_JUMBO_WM << 16) | ECU_AE_THR); + + if (hw->dev[port]->mtu > ETH_DATA_LEN) + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), + TX_JUMBO_ENA | TX_STFW_DIS); + else + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), + TX_JUMBO_DIS | TX_STFW_ENA); } } @@ -1281,7 +1286,7 @@ static int sky2_up(struct net_device *dev) /* Set almost empty threshold */ if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_U_A0) - sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0); + sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV); sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, TX_RING_SIZE - 1); @@ -1587,13 +1592,6 @@ static int sky2_down(struct net_device *dev) sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET | RB_DIS_OP_MD); - /* WA for dev. #4.209 */ - if (hw->chip_id == CHIP_ID_YUKON_EC_U - && (hw->chip_rev == CHIP_REV_YU_EC_U_A1 || hw->chip_rev == CHIP_REV_YU_EC_U_B0)) - sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), - sky2->speed != SPEED_1000 ? - TX_STFW_ENA : TX_STFW_DIS); - ctrl = gma_read16(hw, port, GM_GP_CTRL); ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA); gma_write16(hw, port, GM_GP_CTRL, ctrl); @@ -1893,6 +1891,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) { struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; int err; u16 ctl, mode; u32 imask; @@ -1900,10 +1899,6 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) return -EINVAL; - /* TSO on Yukon Ultra and MTU > 1500 not supported */ - if (hw->chip_id == CHIP_ID_YUKON_EC_U && new_mtu > ETH_DATA_LEN) - dev->features &= ~NETIF_F_TSO; - if (!netif_running(dev)) { dev->mtu = new_mtu; return 0; @@ -1918,8 +1913,18 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) synchronize_irq(hw->pdev->irq); - ctl = gma_read16(hw, sky2->port, GM_GP_CTRL); - gma_write16(hw, sky2->port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA); + if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) { + if (new_mtu > ETH_DATA_LEN) { + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), + TX_JUMBO_ENA | TX_STFW_DIS); + dev->features &= NETIF_F_TSO | NETIF_F_SG | NETIF_F_IP_CSUM; + } else + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), + TX_JUMBO_DIS | TX_STFW_ENA); + } + + ctl = gma_read16(hw, port, GM_GP_CTRL); + gma_write16(hw, port, GM_GP_CTRL, ctl & ~GM_GPCR_RX_ENA); sky2_rx_stop(sky2); sky2_rx_clean(sky2); @@ -1931,9 +1936,9 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) if (dev->mtu > ETH_DATA_LEN) mode |= GM_SMOD_JUMBO_ENA; - gma_write16(hw, sky2->port, GM_SERIAL_MODE, mode); + gma_write16(hw, port, GM_SERIAL_MODE, mode); - sky2_write8(hw, RB_ADDR(rxqaddr[sky2->port], RB_CTRL), RB_ENA_OP_MD); + sky2_write8(hw, RB_ADDR(rxqaddr[port], RB_CTRL), RB_ENA_OP_MD); err = sky2_rx_start(sky2); sky2_write32(hw, B0_IMSK, imask); @@ -1941,7 +1946,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) if (err) dev_close(dev); else { - gma_write16(hw, sky2->port, GM_GP_CTRL, ctl); + gma_write16(hw, port, GM_GP_CTRL, ctl); netif_poll_enable(hw->dev[0]); netif_wake_queue(dev); @@ -3334,6 +3339,36 @@ static void sky2_get_regs(struct net_device *dev, struct ethtool_regs *regs, regs->len - B3_RI_WTO_R1); } +/* In order to do Jumbo packets on these chips, need to turn off the + * transmit store/forward. Therefore checksum offload won't work. + */ +static int no_tx_offload(struct net_device *dev) +{ + const struct sky2_port *sky2 = netdev_priv(dev); + const struct sky2_hw *hw = sky2->hw; + + return dev->mtu > ETH_DATA_LEN && + (hw->chip_id == CHIP_ID_YUKON_EX + || hw->chip_id == CHIP_ID_YUKON_EC_U); +} + +static int sky2_set_tx_csum(struct net_device *dev, u32 data) +{ + if (data && no_tx_offload(dev)) + return -EINVAL; + + return ethtool_op_set_tx_csum(dev, data); +} + + +static int sky2_set_tso(struct net_device *dev, u32 data) +{ + if (data && no_tx_offload(dev)) + return -EINVAL; + + return ethtool_op_set_tso(dev, data); +} + static const struct ethtool_ops sky2_ethtool_ops = { .get_settings = sky2_get_settings, .set_settings = sky2_set_settings, @@ -3349,9 +3384,9 @@ static const struct ethtool_ops sky2_ethtool_ops = { .get_sg = ethtool_op_get_sg, .set_sg = ethtool_op_set_sg, .get_tx_csum = ethtool_op_get_tx_csum, - .set_tx_csum = ethtool_op_set_tx_csum, + .set_tx_csum = sky2_set_tx_csum, .get_tso = ethtool_op_get_tso, - .set_tso = ethtool_op_set_tso, + .set_tso = sky2_set_tso, .get_rx_csum = sky2_get_rx_csum, .set_rx_csum = sky2_set_rx_csum, .get_strings = sky2_get_strings, |