Merge ../linus

Conflicts:

	drivers/cpufreq/cpufreq.c

5 files changed, 79 insertions, 61 deletions

diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 58b7efbb075..21f76f51c95 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -57,44 +57,6 @@ config COSA
 	  The driver will be compiled as a module: the
 	  module will be called cosa.
 
-config DSCC4
-	tristate "Etinc PCISYNC serial board support"
-	depends on WAN && PCI && m
-	help
-	  Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens)
-	  DSCC4 chipset.
-
-	  This is supposed to work with the four port card. Take a look at
-	  <http://www.cogenit.fr/dscc4/> for further information about the
-	  driver.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called dscc4.
-
-config DSCC4_PCISYNC
-	bool "Etinc PCISYNC features"
-	depends on DSCC4
-	help
-	  Due to Etinc's design choice for its PCISYNC cards, some operations
-	  are only allowed on specific ports of the DSCC4. This option is the
-	  only way for the driver to know that it shouldn't return a success
-	  code for these operations.
-
-	  Please say Y if your card is an Etinc's PCISYNC.
-
-config DSCC4_PCI_RST
-	bool "Hard reset support"
-	depends on DSCC4
-	help
-	  Various DSCC4 bugs forbid any reliable software reset of the ASIC.
-	  As a replacement, some vendors provide a way to assert the PCI #RST
-	  pin of DSCC4 through the GPIO port of the card. If you choose Y,
-	  the driver will make use of this feature before module removal
-	  (i.e. rmmod). The feature is known to be available on Commtech's
-	  cards. Contact your manufacturer for details.
-
-	  Say Y if your card supports this feature.
-
 #
 # Lan Media's board. Currently 1000, 1200, 5200, 5245
 #
@@ -127,7 +89,7 @@ config LANMEDIA
 # There is no way to detect a Sealevel board. Force it modular
 config SEALEVEL_4021
 	tristate "Sealevel Systems 4021 support"
-	depends on WAN && ISA && m && ISA_DMA_API
+	depends on WAN && ISA && m && ISA_DMA_API && INET
 	help
 	  This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
 
@@ -323,6 +285,44 @@ config FARSYNC
 	  To compile this driver as a module, choose M here: the
 	  module will be called farsync.
 
+config DSCC4
+	tristate "Etinc PCISYNC serial board support"
+	depends on HDLC && PCI && m
+	help
+	  Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens)
+	  DSCC4 chipset.
+
+	  This is supposed to work with the four port card. Take a look at
+	  <http://www.cogenit.fr/dscc4/> for further information about the
+	  driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dscc4.
+
+config DSCC4_PCISYNC
+	bool "Etinc PCISYNC features"
+	depends on DSCC4
+	help
+	  Due to Etinc's design choice for its PCISYNC cards, some operations
+	  are only allowed on specific ports of the DSCC4. This option is the
+	  only way for the driver to know that it shouldn't return a success
+	  code for these operations.
+
+	  Please say Y if your card is an Etinc's PCISYNC.
+
+config DSCC4_PCI_RST
+	bool "Hard reset support"
+	depends on DSCC4
+	help
+	  Various DSCC4 bugs forbid any reliable software reset of the ASIC.
+	  As a replacement, some vendors provide a way to assert the PCI #RST
+	  pin of DSCC4 through the GPIO port of the card. If you choose Y,
+	  the driver will make use of this feature before module removal
+	  (i.e. rmmod). The feature is known to be available on Commtech's
+	  cards. Contact your manufacturer for details.
+
+	  Say Y if your card supports this feature.
+
 config DLCI
 	tristate "Frame Relay DLCI support"
 	depends on WAN
@@ -382,7 +382,7 @@ config SDLA
 
 # Wan router core.
 config WAN_ROUTER_DRIVERS
-	bool "WAN router drivers"
+	tristate "WAN router drivers"
 	depends on WAN && WAN_ROUTER
 	---help---
 	  Connect LAN to WAN via Linux box.
@@ -393,7 +393,8 @@ config WAN_ROUTER_DRIVERS
 	  <file:Documentation/networking/wan-router.txt>.
 
 	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
+	  kernel except for how subordinate drivers may be built:
+	  saying N will just cause the configurator to skip all
 	  the questions about WAN router drivers.
 
 	  If unsure, say N.
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index e1bf8b93f95..6c7dfb50143 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -974,12 +974,12 @@ static int cosa_open(struct inode *inode, struct file *file)
 	unsigned long flags;
 	int n;
 
-	if ((n=iminor(file->f_dentry->d_inode)>>CARD_MINOR_BITS)
+	if ((n=iminor(file->f_path.dentry->d_inode)>>CARD_MINOR_BITS)
 		>= nr_cards)
 		return -ENODEV;
 	cosa = cosa_cards+n;
 
-	if ((n=iminor(file->f_dentry->d_inode)
+	if ((n=iminor(file->f_path.dentry->d_inode)
 		& ((1<<CARD_MINOR_BITS)-1)) >= cosa->nchannels)
 		return -ENODEV;
 	chan = cosa->chan + n;
diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c
index dcf46add3ad..5c322dfb79f 100644
--- a/drivers/net/wan/n2.c
+++ b/drivers/net/wan/n2.c
@@ -500,7 +500,7 @@ static int __init n2_init(void)
 #ifdef MODULE
 		printk(KERN_INFO "n2: no card initialized\n");
 #endif
-		return -ENOSYS;	/* no parameters specified, abort */
+		return -EINVAL;	/* no parameters specified, abort */
 	}
 
 	printk(KERN_INFO "%s\n", version);
@@ -538,11 +538,11 @@ static int __init n2_init(void)
 			n2_run(io, irq, ram, valid[0], valid[1]);
 
 		if (*hw == '\x0')
-			return first_card ? 0 : -ENOSYS;
+			return first_card ? 0 : -EINVAL;
 	}while(*hw++ == ':');
 
 	printk(KERN_ERR "n2: invalid hardware parameters\n");
-	return first_card ? 0 : -ENOSYS;
+	return first_card ? 0 : -EINVAL;
 }
 
 
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index 5823e3bca17..36d1c3ff707 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -2867,7 +2867,6 @@ static int ch_config(pc300dev_t * d)
 	uclong clktype = chan->conf.phys_settings.clock_type;
 	ucshort encoding = chan->conf.proto_settings.encoding;
 	ucshort parity = chan->conf.proto_settings.parity;   
-	int tmc, br;
 	ucchar md0, md2;
     
 	/* Reset the channel */
@@ -2940,8 +2939,12 @@ static int ch_config(pc300dev_t * d)
 		case PC300_RSV:
 		case PC300_X21:
 			if (clktype == CLOCK_INT || clktype == CLOCK_TXINT) {
+				int tmc, br;
+
 				/* Calculate the clkrate parameters */
 				tmc = clock_rate_calc(clkrate, card->hw.clock, &br);
+				if (tmc < 0)
+					return -EIO;
 				cpc_writeb(scabase + M_REG(TMCT, ch), tmc);
 				cpc_writeb(scabase + M_REG(TXS, ch),
 					   (TXS_DTRXC | TXS_IBRG | br));
@@ -3097,14 +3100,16 @@ static int cpc_attach(struct net_device *dev, unsigned short encoding,
 	return 0;
 }
 
-static void cpc_opench(pc300dev_t * d)
+static int cpc_opench(pc300dev_t * d)
 {
 	pc300ch_t *chan = (pc300ch_t *) d->chan;
 	pc300_t *card = (pc300_t *) chan->card;
-	int ch = chan->channel;
+	int ch = chan->channel, rc;
 	void __iomem *scabase = card->hw.scabase;
 
-	ch_config(d);
+	rc = ch_config(d);
+	if (rc)
+		return rc;
 
 	rx_config(d);
 
@@ -3113,6 +3118,8 @@ static void cpc_opench(pc300dev_t * d)
 	/* Assert RTS and DTR */
 	cpc_writeb(scabase + M_REG(CTL, ch),
 		   cpc_readb(scabase + M_REG(CTL, ch)) & ~(CTL_RTS | CTL_DTR));
+
+	return 0;
 }
 
 static void cpc_closech(pc300dev_t * d)
@@ -3168,9 +3175,16 @@ int cpc_open(struct net_device *dev)
 	}
 
 	sprintf(ifr.ifr_name, "%s", dev->name);
-	cpc_opench(d);
+	result = cpc_opench(d);
+	if (result)
+		goto err_out;
+
 	netif_start_queue(dev);
 	return 0;
+
+err_out:
+	hdlc_close(dev);
+	return result;
 }
 
 static int cpc_close(struct net_device *dev)
diff --git a/drivers/net/wan/pc300_tty.c b/drivers/net/wan/pc300_tty.c
index 931cbdf6d79..b2a23aed442 100644
--- a/drivers/net/wan/pc300_tty.c
+++ b/drivers/net/wan/pc300_tty.c
@@ -125,8 +125,8 @@ static int cpc_tty_write_room(struct tty_struct *tty);
 static int cpc_tty_chars_in_buffer(struct tty_struct *tty);
 static void cpc_tty_flush_buffer(struct tty_struct *tty);
 static void cpc_tty_hangup(struct tty_struct *tty);
-static void cpc_tty_rx_work(void *data);
-static void cpc_tty_tx_work(void *data);
+static void cpc_tty_rx_work(struct work_struct *work);
+static void cpc_tty_tx_work(struct work_struct *work);
 static int cpc_tty_send_to_card(pc300dev_t *dev,void *buf, int len);
 static void cpc_tty_trace(pc300dev_t *dev, char* buf, int len, char rxtx);
 static void cpc_tty_signal_off(pc300dev_t *pc300dev, unsigned char);
@@ -261,8 +261,8 @@ void cpc_tty_init(pc300dev_t *pc300dev)
 	cpc_tty->tty_minor = port + CPC_TTY_MINOR_START;
 	cpc_tty->pc300dev = pc300dev; 
 
-	INIT_WORK(&cpc_tty->tty_tx_work, cpc_tty_tx_work, (void *)cpc_tty);
-	INIT_WORK(&cpc_tty->tty_rx_work, cpc_tty_rx_work, (void *)port);
+	INIT_WORK(&cpc_tty->tty_tx_work, cpc_tty_tx_work);
+	INIT_WORK(&cpc_tty->tty_rx_work, cpc_tty_rx_work);
 	
 	cpc_tty->buf_rx.first = cpc_tty->buf_rx.last = NULL;
 
@@ -659,21 +659,23 @@ static void cpc_tty_hangup(struct tty_struct *tty)
  * o call the line disc. read
  * o free memory
  */
-static void cpc_tty_rx_work(void * data)
+static void cpc_tty_rx_work(struct work_struct *work)
 {
+	st_cpc_tty_area *cpc_tty;
 	unsigned long port;
 	int i, j;
-	st_cpc_tty_area *cpc_tty; 
 	volatile st_cpc_rx_buf *buf;
 	char flags=0,flg_rx=1; 
 	struct tty_ldisc *ld;
 
 	if (cpc_tty_cnt == 0) return;
-
 	
 	for (i=0; (i < 4) && flg_rx ; i++) {
 		flg_rx = 0;
-		port = (unsigned long)data;
+
+		cpc_tty = container_of(work, st_cpc_tty_area, tty_rx_work);
+		port = cpc_tty - cpc_tty_area;
+
 		for (j=0; j < CPC_TTY_NPORTS; j++) {
 			cpc_tty = &cpc_tty_area[port];
 		
@@ -882,9 +884,10 @@ void cpc_tty_receive(pc300dev_t *pc300dev)
  * o if need call line discipline wakeup
  * o call wake_up_interruptible
  */
-static void cpc_tty_tx_work(void *data)
+static void cpc_tty_tx_work(struct work_struct *work)
 {
-	st_cpc_tty_area *cpc_tty = (st_cpc_tty_area *) data; 
+	st_cpc_tty_area *cpc_tty =
+		container_of(work, st_cpc_tty_area, tty_tx_work);
 	struct tty_struct *tty; 
 
 	CPC_TTY_DBG("%s: cpc_tty_tx_work init\n",cpc_tty->name);