ath5k: Cleanup after API changes

Cleanup after API changes patch (checkpatch.pl stuff) and on
ath5k_hw_channel() make use of the existing ath5k_channel_ok()
instead of re-implementing the checks again. This was necessary
to make the code cleaner and fit the 80-chars wide limit so
sending it within the same patch.

Finally make a note that we *may* eventually move cap_range stuff
to struct wiphy (band frequency range capabilities). This
information can later be exported to userspace, for example,
and giving it access to mac80211 and drivers in general can come
in handy.

Changes to initvals.c, phy.c
Changes-licensed-under: ISC

Changes to ath5k.h, base.c
Changes-licensed-under: 3-Clause-BSD

Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 18 insertions, 17 deletions

diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
index 8b576b314cf..248c0f545f2 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath5k/phy.c
@@ -1124,7 +1124,7 @@ static int ath5k_hw_rf5112_rfregs(struct ath5k_hw *ah,
 	rf = ah->ah_rf_banks;
 
 	if (ah->ah_radio_5ghz_revision >= AR5K_SREV_RAD_2112A
-		&& !test_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode)){
+		&& !test_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode)) {
 		rf_ini = rfregs_2112a;
 		rf_size = ARRAY_SIZE(rfregs_5112a);
 		if (mode < 2) {
@@ -1445,9 +1445,10 @@ static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel)
 	 * newer chipsets like the AR5212A who have a completely
 	 * different RF/PHY part.
 	 */
-	athchan = (ath5k_hw_bitswap((ieee80211_frequency_to_channel(channel->center_freq) - 24) / 2, 5) << 1) |
-		(1 << 6) | 0x1;
-
+	athchan = (ath5k_hw_bitswap(
+			(ieee80211_frequency_to_channel(
+				channel->center_freq) - 24) / 2, 5)
+				<< 1) | (1 << 6) | 0x1;
 	return athchan;
 }
 
@@ -1506,7 +1507,8 @@ static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah,
 		struct ieee80211_channel *channel)
 {
 	struct ath5k_athchan_2ghz ath5k_channel_2ghz;
-	unsigned int ath5k_channel = ieee80211_frequency_to_channel(channel->center_freq);
+	unsigned int ath5k_channel =
+		ieee80211_frequency_to_channel(channel->center_freq);
 	u32 data0, data1, clock;
 	int ret;
 
@@ -1517,8 +1519,9 @@ static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah,
 
 	if (channel->hw_value & CHANNEL_2GHZ) {
 		/* Map 2GHz channel to 5GHz Atheros channel ID */
-		ret = ath5k_hw_rf5111_chan2athchan(ieee80211_frequency_to_channel(channel->center_freq),
-				&ath5k_channel_2ghz);
+		ret = ath5k_hw_rf5111_chan2athchan(
+			ieee80211_frequency_to_channel(channel->center_freq),
+			&ath5k_channel_2ghz);
 		if (ret)
 			return ret;
 
@@ -1599,19 +1602,17 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
 int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
 {
 	int ret;
-
 	/*
-	 * Check bounds supported by the PHY
-	 * (don't care about regulation restrictions at this point)
-	 */
-	if ((channel->center_freq < ah->ah_capabilities.cap_range.range_2ghz_min ||
-	    channel->center_freq > ah->ah_capabilities.cap_range.range_2ghz_max) &&
-	    (channel->center_freq < ah->ah_capabilities.cap_range.range_5ghz_min ||
-	    channel->center_freq > ah->ah_capabilities.cap_range.range_5ghz_max)) {
+	 * Check bounds supported by the PHY (we don't care about regultory
+	 * restrictions at this point). Note: hw_value already has the band
+	 * (CHANNEL_2GHZ, or CHANNEL_5GHZ) so we inform ath5k_channel_ok()
+	 * of the band by that */
+	if (!ath5k_channel_ok(ah, channel->center_freq, channel->hw_value)) {
 		ATH5K_ERR(ah->ah_sc,
-			"channel out of supported range (%u MHz)\n",
+			"channel frequency (%u MHz) out of supported "
+			"band range\n",
 			channel->center_freq);
-		return -EINVAL;
+			return -EINVAL;
 	}
 
 	/*