aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath5k/reset.c
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2008-11-03 11:27:38 +0100
committerJohn W. Linville <linville@tuxdriver.com>2008-11-21 11:06:05 -0500
commit8b0162a3dc5c30e862b7a73da29e32de3170f5e4 (patch)
treeb37b7930eb666f65a8844e769cc6f861c84c9639 /drivers/net/wireless/ath5k/reset.c
parent6d64360ac56cda95243f15738a06f2a123c663e5 (diff)
ath5k: ignore the return value of ath5k_hw_noise_floor_calibration
Noise floor calibration occasionally fails on Atheros hardware. This is not fatal and can happen if there's simply too much noise on the air. Ignoring the calibration error is the right thing to do here, because when the error is ignored, the hardware will still work, whereas if the error causes the driver to bail out of a bigger configuration function and does not configure the tx queues or the IMR (as is the case in reset.c), the hw no longer works properly until the next reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ath5k/reset.c')
-rw-r--r--drivers/net/wireless/ath5k/reset.c4
1 files changed, 1 insertions, 3 deletions
diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c
index b51bc030da0..5003263c9ea 100644
--- a/drivers/net/wireless/ath5k/reset.c
+++ b/drivers/net/wireless/ath5k/reset.c
@@ -842,9 +842,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
*
* XXX: Find an interval that's OK for all cards...
*/
- ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
- if (ret)
- return ret;
+ ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
/*
* Reset queues and start beacon timers at the end of the reset routine