mac80211: unify config_interface and bss_info_changed

The config_interface method is a little strange, it contains the
BSSID and beacon updates, while bss_info_changed contains most
other BSS information for each interface. This patch removes
config_interface and rolls all the information it previously
passed to drivers into bss_info_changed.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

3 files changed, 121 insertions, 171 deletions

diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index 49c729bc714..3bd3a61225c 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -1360,33 +1360,6 @@ out:
 	return err;
 }
 
-static int ar9170_op_config_interface(struct ieee80211_hw *hw,
-				      struct ieee80211_vif *vif,
-				      struct ieee80211_if_conf *conf)
-{
-	struct ar9170 *ar = hw->priv;
-	int err = 0;
-
-	mutex_lock(&ar->mutex);
-
-	if (conf->changed & IEEE80211_IFCC_BSSID) {
-		memcpy(ar->bssid, conf->bssid, ETH_ALEN);
-		err = ar9170_set_operating_mode(ar);
-	}
-
-	if (conf->changed & IEEE80211_IFCC_BEACON) {
-		err = ar9170_update_beacon(ar);
-
-		if (err)
-			goto out;
-		err = ar9170_set_beacon_timers(ar);
-	}
-
-out:
-	mutex_unlock(&ar->mutex);
-	return err;
-}
-
 static void ar9170_set_filters(struct work_struct *work)
 {
 	struct ar9170 *ar = container_of(work, struct ar9170,
@@ -1488,6 +1461,17 @@ static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw,
 
 	mutex_lock(&ar->mutex);
 
+	if (changed & BSS_CHANGED_BSSID) {
+		memcpy(ar->bssid, bss_conf->bssid, ETH_ALEN);
+		err = ar9170_set_operating_mode(ar);
+	}
+
+	if (changed & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED)) {
+		err = ar9170_update_beacon(ar);
+		if (!err)
+			ar9170_set_beacon_timers(ar);
+	}
+
 	ar9170_regwrite_begin(ar);
 
 	if (changed & BSS_CHANGED_ASSOC) {
@@ -1796,7 +1780,6 @@ static const struct ieee80211_ops ar9170_ops = {
 	.add_interface		= ar9170_op_add_interface,
 	.remove_interface	= ar9170_op_remove_interface,
 	.config			= ar9170_op_config,
-	.config_interface	= ar9170_op_config_interface,
 	.configure_filter	= ar9170_op_configure_filter,
 	.conf_tx		= ar9170_conf_tx,
 	.bss_info_changed	= ar9170_op_bss_info_changed,
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index e4b1d9efa42..410fc4cfc4c 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -227,9 +227,6 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
 static void ath5k_remove_interface(struct ieee80211_hw *hw,
 		struct ieee80211_if_init_conf *conf);
 static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
-static int ath5k_config_interface(struct ieee80211_hw *hw,
-		struct ieee80211_vif *vif,
-		struct ieee80211_if_conf *conf);
 static void ath5k_configure_filter(struct ieee80211_hw *hw,
 		unsigned int changed_flags,
 		unsigned int *new_flags,
@@ -259,7 +256,6 @@ static const struct ieee80211_ops ath5k_hw_ops = {
 	.add_interface 	= ath5k_add_interface,
 	.remove_interface = ath5k_remove_interface,
 	.config 	= ath5k_config,
-	.config_interface = ath5k_config_interface,
 	.configure_filter = ath5k_configure_filter,
 	.set_key 	= ath5k_set_key,
 	.get_stats 	= ath5k_get_stats,
@@ -2764,44 +2760,6 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed)
 	return ret;
 }
 
-static int
-ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-			struct ieee80211_if_conf *conf)
-{
-	struct ath5k_softc *sc = hw->priv;
-	struct ath5k_hw *ah = sc->ah;
-	int ret = 0;
-
-	mutex_lock(&sc->lock);
-	if (sc->vif != vif) {
-		ret = -EIO;
-		goto unlock;
-	}
-	if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) {
-		/* Cache for later use during resets */
-		memcpy(ah->ah_bssid, conf->bssid, ETH_ALEN);
-		/* XXX: assoc id is set to 0 for now, mac80211 doesn't have
-		 * a clean way of letting us retrieve this yet. */
-		ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
-		mmiowb();
-	}
-	if (conf->changed & IEEE80211_IFCC_BEACON &&
-			(vif->type == NL80211_IFTYPE_ADHOC ||
-			 vif->type == NL80211_IFTYPE_MESH_POINT ||
-			 vif->type == NL80211_IFTYPE_AP)) {
-		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
-		if (!beacon) {
-			ret = -ENOMEM;
-			goto unlock;
-		}
-		ath5k_beacon_update(sc, beacon);
-	}
-
-unlock:
-	mutex_unlock(&sc->lock);
-	return ret;
-}
-
 #define SUPPORTED_FIF_FLAGS \
 	FIF_PROMISC_IN_BSS |  FIF_ALLMULTI | FIF_FCSFAIL | \
 	FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
@@ -3082,15 +3040,40 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
 				    u32 changes)
 {
 	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_hw *ah = sc->ah;
+
+	mutex_lock(&sc->lock);
+	if (WARN_ON(sc->vif != vif))
+		goto unlock;
+
+	if (changes & BSS_CHANGED_BSSID) {
+		/* Cache for later use during resets */
+		memcpy(ah->ah_bssid, bss_conf->bssid, ETH_ALEN);
+		/* XXX: assoc id is set to 0 for now, mac80211 doesn't have
+		 * a clean way of letting us retrieve this yet. */
+		ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+		mmiowb();
+	}
 
 	if (changes & BSS_CHANGED_BEACON_INT)
 		sc->bintval = bss_conf->beacon_int;
 
 	if (changes & BSS_CHANGED_ASSOC) {
-		mutex_lock(&sc->lock);
 		sc->assoc = bss_conf->assoc;
 		if (sc->opmode == NL80211_IFTYPE_STATION)
 			set_beacon_filter(hw, sc->assoc);
-		mutex_unlock(&sc->lock);
 	}
+
+	if (changes & BSS_CHANGED_BEACON &&
+	    (vif->type == NL80211_IFTYPE_ADHOC ||
+	     vif->type == NL80211_IFTYPE_MESH_POINT ||
+	     vif->type == NL80211_IFTYPE_AP)) {
+		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+
+		if (beacon)
+			ath5k_beacon_update(sc, beacon);
+	}
+
+ unlock:
+	mutex_unlock(&sc->lock);
 }
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 28cc9cd52f3..d3dc8e2c77b 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2363,104 +2363,6 @@ skip_chan_change:
 	return 0;
 }
 
-static int ath9k_config_interface(struct ieee80211_hw *hw,
-				  struct ieee80211_vif *vif,
-				  struct ieee80211_if_conf *conf)
-{
-	struct ath_wiphy *aphy = hw->priv;
-	struct ath_softc *sc = aphy->sc;
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_vif *avp = (void *)vif->drv_priv;
-	u32 rfilt = 0;
-	int error, i;
-
-	mutex_lock(&sc->mutex);
-
-	/* TODO: Need to decide which hw opmode to use for multi-interface
-	 * cases */
-	if (vif->type == NL80211_IFTYPE_AP &&
-	    ah->opmode != NL80211_IFTYPE_AP) {
-		ah->opmode = NL80211_IFTYPE_STATION;
-		ath9k_hw_setopmode(ah);
-		memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
-		sc->curaid = 0;
-		ath9k_hw_write_associd(sc);
-		/* Request full reset to get hw opmode changed properly */
-		sc->sc_flags |= SC_OP_FULL_RESET;
-	}
-
-	if ((conf->changed & IEEE80211_IFCC_BSSID) &&
-	    !is_zero_ether_addr(conf->bssid)) {
-		switch (vif->type) {
-		case NL80211_IFTYPE_STATION:
-		case NL80211_IFTYPE_ADHOC:
-		case NL80211_IFTYPE_MESH_POINT:
-			/* Set BSSID */
-			memcpy(sc->curbssid, conf->bssid, ETH_ALEN);
-			memcpy(avp->bssid, conf->bssid, ETH_ALEN);
-			sc->curaid = 0;
-			ath9k_hw_write_associd(sc);
-
-			/* Set aggregation protection mode parameters */
-			sc->config.ath_aggr_prot = 0;
-
-			DPRINTF(sc, ATH_DBG_CONFIG,
-				"RX filter 0x%x bssid %pM aid 0x%x\n",
-				rfilt, sc->curbssid, sc->curaid);
-
-			/* need to reconfigure the beacon */
-			sc->sc_flags &= ~SC_OP_BEACONS ;
-
-			break;
-		default:
-			break;
-		}
-	}
-
-	if ((vif->type == NL80211_IFTYPE_ADHOC) ||
-	    (vif->type == NL80211_IFTYPE_AP) ||
-	    (vif->type == NL80211_IFTYPE_MESH_POINT)) {
-		if ((conf->changed & IEEE80211_IFCC_BEACON) ||
-		    (conf->changed & IEEE80211_IFCC_BEACON_ENABLED &&
-		     conf->enable_beacon)) {
-			/*
-			 * Allocate and setup the beacon frame.
-			 *
-			 * Stop any previous beacon DMA.  This may be
-			 * necessary, for example, when an ibss merge
-			 * causes reconfiguration; we may be called
-			 * with beacon transmission active.
-			 */
-			ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
-
-			error = ath_beacon_alloc(aphy, vif);
-			if (error != 0) {
-				mutex_unlock(&sc->mutex);
-				return error;
-			}
-
-			ath_beacon_config(sc, vif);
-		}
-	}
-
-	/* Check for WLAN_CAPABILITY_PRIVACY ? */
-	if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
-		for (i = 0; i < IEEE80211_WEP_NKID; i++)
-			if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
-				ath9k_hw_keysetmac(sc->sc_ah,
-						   (u16)i,
-						   sc->curbssid);
-	}
-
-	/* Only legacy IBSS for now */
-	if (vif->type == NL80211_IFTYPE_ADHOC)
-		ath_update_chainmask(sc, 0);
-
-	mutex_unlock(&sc->mutex);
-
-	return 0;
-}
-
 #define SUPPORTED_FILTERS			\
 	(FIF_PROMISC_IN_BSS |			\
 	FIF_ALLMULTI |				\
@@ -2597,9 +2499,92 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_vif *avp = (void *)vif->drv_priv;
+	u32 rfilt = 0;
+	int error, i;
 
 	mutex_lock(&sc->mutex);
 
+	/*
+	 * TODO: Need to decide which hw opmode to use for
+	 *       multi-interface cases
+	 * XXX: This belongs into add_interface!
+	 */
+	if (vif->type == NL80211_IFTYPE_AP &&
+	    ah->opmode != NL80211_IFTYPE_AP) {
+		ah->opmode = NL80211_IFTYPE_STATION;
+		ath9k_hw_setopmode(ah);
+		memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
+		sc->curaid = 0;
+		ath9k_hw_write_associd(sc);
+		/* Request full reset to get hw opmode changed properly */
+		sc->sc_flags |= SC_OP_FULL_RESET;
+	}
+
+	if ((changed & BSS_CHANGED_BSSID) &&
+	    !is_zero_ether_addr(bss_conf->bssid)) {
+		switch (vif->type) {
+		case NL80211_IFTYPE_STATION:
+		case NL80211_IFTYPE_ADHOC:
+		case NL80211_IFTYPE_MESH_POINT:
+			/* Set BSSID */
+			memcpy(sc->curbssid, bss_conf->bssid, ETH_ALEN);
+			memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
+			sc->curaid = 0;
+			ath9k_hw_write_associd(sc);
+
+			/* Set aggregation protection mode parameters */
+			sc->config.ath_aggr_prot = 0;
+
+			DPRINTF(sc, ATH_DBG_CONFIG,
+				"RX filter 0x%x bssid %pM aid 0x%x\n",
+				rfilt, sc->curbssid, sc->curaid);
+
+			/* need to reconfigure the beacon */
+			sc->sc_flags &= ~SC_OP_BEACONS ;
+
+			break;
+		default:
+			break;
+		}
+	}
+
+	if ((vif->type == NL80211_IFTYPE_ADHOC) ||
+	    (vif->type == NL80211_IFTYPE_AP) ||
+	    (vif->type == NL80211_IFTYPE_MESH_POINT)) {
+		if ((changed & BSS_CHANGED_BEACON) ||
+		    (changed & BSS_CHANGED_BEACON_ENABLED &&
+		     bss_conf->enable_beacon)) {
+			/*
+			 * Allocate and setup the beacon frame.
+			 *
+			 * Stop any previous beacon DMA.  This may be
+			 * necessary, for example, when an ibss merge
+			 * causes reconfiguration; we may be called
+			 * with beacon transmission active.
+			 */
+			ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
+
+			error = ath_beacon_alloc(aphy, vif);
+			if (!error)
+				ath_beacon_config(sc, vif);
+		}
+	}
+
+	/* Check for WLAN_CAPABILITY_PRIVACY ? */
+	if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
+		for (i = 0; i < IEEE80211_WEP_NKID; i++)
+			if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
+				ath9k_hw_keysetmac(sc->sc_ah,
+						   (u16)i,
+						   sc->curbssid);
+	}
+
+	/* Only legacy IBSS for now */
+	if (vif->type == NL80211_IFTYPE_ADHOC)
+		ath_update_chainmask(sc, 0);
+
 	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
 		DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
 			bss_conf->use_short_preamble);
@@ -2757,7 +2742,6 @@ struct ieee80211_ops ath9k_ops = {
 	.add_interface 	    = ath9k_add_interface,
 	.remove_interface   = ath9k_remove_interface,
 	.config 	    = ath9k_config,
-	.config_interface   = ath9k_config_interface,
 	.configure_filter   = ath9k_configure_filter,
 	.sta_notify         = ath9k_sta_notify,
 	.conf_tx 	    = ath9k_conf_tx,