aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi
diff options
context:
space:
mode:
authorAssaf Krauss <assaf.krauss@intel.com>2008-03-11 16:17:18 -0700
committerJohn W. Linville <linville@tuxdriver.com>2008-03-13 19:32:32 -0400
commit6bc913bd965e03b5273a5366eecce5c28c9b01da (patch)
treeebc5aee6b2eb48660ab555af62b4da0119bd8446 /drivers/net/wireless/iwlwifi
parenteb7ae89cb0b03e6e6e39737b1c8bcc1912281a00 (diff)
iwlwifi: Use eeprom form iwlcore
This patch puts in use eeprom from iwlcore module Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/iwlwifi')
-rw-r--r--drivers/net/wireless/iwlwifi/Makefile2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-4965-hw.h310
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-4965.c45
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-4965.h4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.c1
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.h10
-rw-r--r--drivers/net/wireless/iwlwifi/iwl4965-base.c84
7 files changed, 30 insertions, 426 deletions
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 6b85cca9b3f..59d9c90d361 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -1,5 +1,5 @@
obj-$(CONFIG_IWLCORE) += iwlcore.o
-iwlcore-objs = iwl-core.o
+iwlcore-objs = iwl-core.o iwl-eeprom.o
obj-$(CONFIG_IWL3945) += iwl3945.o
iwl3945-objs = iwl3945-base.o iwl-3945.o iwl-3945-rs.o
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
index 4a29b44950a..c66993eb5b6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
@@ -92,316 +92,6 @@
/* RSSI to dBm */
#define IWL_RSSI_OFFSET 44
-/*
- * EEPROM related constants, enums, and structures.
- */
-
-/*
- * EEPROM access time values:
- *
- * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG,
- * then clearing (with subsequent read/modify/write) CSR_EEPROM_REG bit
- * CSR_EEPROM_REG_BIT_CMD (0x2).
- * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1).
- * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec.
- * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG.
- */
-#define IWL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */
-#define IWL_EEPROM_ACCESS_DELAY 10 /* uSec */
-
-/*
- * Regulatory channel usage flags in EEPROM struct iwl4965_eeprom_channel.flags.
- *
- * IBSS and/or AP operation is allowed *only* on those channels with
- * (VALID && IBSS && ACTIVE && !RADAR). This restriction is in place because
- * RADAR detection is not supported by the 4965 driver, but is a
- * requirement for establishing a new network for legal operation on channels
- * requiring RADAR detection or restricting ACTIVE scanning.
- *
- * NOTE: "WIDE" flag does not indicate anything about "FAT" 40 MHz channels.
- * It only indicates that 20 MHz channel use is supported; FAT channel
- * usage is indicated by a separate set of regulatory flags for each
- * FAT channel pair.
- *
- * NOTE: Using a channel inappropriately will result in a uCode error!
- */
-enum {
- EEPROM_CHANNEL_VALID = (1 << 0), /* usable for this SKU/geo */
- EEPROM_CHANNEL_IBSS = (1 << 1), /* usable as an IBSS channel */
- /* Bit 2 Reserved */
- EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */
- EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */
- EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */
- EEPROM_CHANNEL_NARROW = (1 << 6), /* 10 MHz channel (not used) */
- EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */
-};
-
-/* SKU Capabilities */
-#define EEPROM_SKU_CAP_SW_RF_KILL_ENABLE (1 << 0)
-#define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE (1 << 1)
-
-/* *regulatory* channel data format in eeprom, one for each channel.
- * There are separate entries for FAT (40 MHz) vs. normal (20 MHz) channels. */
-struct iwl4965_eeprom_channel {
- u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */
- s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */
-} __attribute__ ((packed));
-
-/* 4965 has two radio transmitters (and 3 radio receivers) */
-#define EEPROM_TX_POWER_TX_CHAINS (2)
-
-/* 4965 has room for up to 8 sets of txpower calibration data */
-#define EEPROM_TX_POWER_BANDS (8)
-
-/* 4965 factory calibration measures txpower gain settings for
- * each of 3 target output levels */
-#define EEPROM_TX_POWER_MEASUREMENTS (3)
-
-/* 4965 driver does not work with txpower calibration version < 5.
- * Look for this in calib_version member of struct iwl4965_eeprom. */
-#define EEPROM_TX_POWER_VERSION_NEW (5)
-
-
-/*
- * 4965 factory calibration data for one txpower level, on one channel,
- * measured on one of the 2 tx chains (radio transmitter and associated
- * antenna). EEPROM contains:
- *
- * 1) Temperature (degrees Celsius) of device when measurement was made.
- *
- * 2) Gain table index used to achieve the target measurement power.
- * This refers to the "well-known" gain tables (see iwl-4965-hw.h).
- *
- * 3) Actual measured output power, in half-dBm ("34" = 17 dBm).
- *
- * 4) RF power amplifier detector level measurement (not used).
- */
-struct iwl4965_eeprom_calib_measure {
- u8 temperature; /* Device temperature (Celsius) */
- u8 gain_idx; /* Index into gain table */
- u8 actual_pow; /* Measured RF output power, half-dBm */
- s8 pa_det; /* Power amp detector level (not used) */
-} __attribute__ ((packed));
-
-
-/*
- * 4965 measurement set for one channel. EEPROM contains:
- *
- * 1) Channel number measured
- *
- * 2) Measurements for each of 3 power levels for each of 2 radio transmitters
- * (a.k.a. "tx chains") (6 measurements altogether)
- */
-struct iwl4965_eeprom_calib_ch_info {
- u8 ch_num;
- struct iwl4965_eeprom_calib_measure measurements[EEPROM_TX_POWER_TX_CHAINS]
- [EEPROM_TX_POWER_MEASUREMENTS];
-} __attribute__ ((packed));
-
-/*
- * 4965 txpower subband info.
- *
- * For each frequency subband, EEPROM contains the following:
- *
- * 1) First and last channels within range of the subband. "0" values
- * indicate that this sample set is not being used.
- *
- * 2) Sample measurement sets for 2 channels close to the range endpoints.
- */
-struct iwl4965_eeprom_calib_subband_info {
- u8 ch_from; /* channel number of lowest channel in subband */
- u8 ch_to; /* channel number of highest channel in subband */
- struct iwl4965_eeprom_calib_ch_info ch1;
- struct iwl4965_eeprom_calib_ch_info ch2;
-} __attribute__ ((packed));
-
-
-/*
- * 4965 txpower calibration info. EEPROM contains:
- *
- * 1) Factory-measured saturation power levels (maximum levels at which
- * tx power amplifier can output a signal without too much distortion).
- * There is one level for 2.4 GHz band and one for 5 GHz band. These
- * values apply to all channels within each of the bands.
- *
- * 2) Factory-measured power supply voltage level. This is assumed to be
- * constant (i.e. same value applies to all channels/bands) while the
- * factory measurements are being made.
- *
- * 3) Up to 8 sets of factory-measured txpower calibration values.
- * These are for different frequency ranges, since txpower gain
- * characteristics of the analog radio circuitry vary with frequency.
- *
- * Not all sets need to be filled with data;
- * struct iwl4965_eeprom_calib_subband_info contains range of channels
- * (0 if unused) for each set of data.
- */
-struct iwl4965_eeprom_calib_info {
- u8 saturation_power24; /* half-dBm (e.g. "34" = 17 dBm) */
- u8 saturation_power52; /* half-dBm */
- s16 voltage; /* signed */
- struct iwl4965_eeprom_calib_subband_info band_info[EEPROM_TX_POWER_BANDS];
-} __attribute__ ((packed));
-
-
-/*
- * 4965 EEPROM map
- */
-struct iwl4965_eeprom {
- u8 reserved0[16];
-#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */
- u16 device_id; /* abs.ofs: 16 */
- u8 reserved1[2];
-#define EEPROM_PMC (2*0x0A) /* 2 bytes */
- u16 pmc; /* abs.ofs: 20 */
- u8 reserved2[20];
-#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */
- u8 mac_address[6]; /* abs.ofs: 42 */
- u8 reserved3[58];
-#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */
- u16 board_revision; /* abs.ofs: 106 */
- u8 reserved4[11];
-#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */
- u8 board_pba_number[9]; /* abs.ofs: 119 */
- u8 reserved5[8];
-#define EEPROM_VERSION (2*0x44) /* 2 bytes */
- u16 version; /* abs.ofs: 136 */
-#define EEPROM_SKU_CAP (2*0x45) /* 1 bytes */
- u8 sku_cap; /* abs.ofs: 138 */
-#define EEPROM_LEDS_MODE (2*0x45+1) /* 1 bytes */
- u8 leds_mode; /* abs.ofs: 139 */
-#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */
- u16 oem_mode;
-#define EEPROM_WOWLAN_MODE (2*0x47) /* 2 bytes */
- u16 wowlan_mode; /* abs.ofs: 142 */
-#define EEPROM_LEDS_TIME_INTERVAL (2*0x48) /* 2 bytes */
- u16 leds_time_interval; /* abs.ofs: 144 */
-#define EEPROM_LEDS_OFF_TIME (2*0x49) /* 1 bytes */
- u8 leds_off_time; /* abs.ofs: 146 */
-#define EEPROM_LEDS_ON_TIME (2*0x49+1) /* 1 bytes */
- u8 leds_on_time; /* abs.ofs: 147 */
-#define EEPROM_ALMGOR_M_VERSION (2*0x4A) /* 1 bytes */
- u8 almgor_m_version; /* abs.ofs: 148 */
-#define EEPROM_ANTENNA_SWITCH_TYPE (2*0x4A+1) /* 1 bytes */
- u8 antenna_switch_type; /* abs.ofs: 149 */
- u8 reserved6[8];
-#define EEPROM_4965_BOARD_REVISION (2*0x4F) /* 2 bytes */
- u16 board_revision_4965; /* abs.ofs: 158 */
- u8 reserved7[13];
-#define EEPROM_4965_BOARD_PBA (2*0x56+1) /* 9 bytes */
- u8 board_pba_number_4965[9]; /* abs.ofs: 173 */
- u8 reserved8[10];
-#define EEPROM_REGULATORY_SKU_ID (2*0x60) /* 4 bytes */
- u8 sku_id[4]; /* abs.ofs: 192 */
-
-/*
- * Per-channel regulatory data.
- *
- * Each channel that *might* be supported by 3945 or 4965 has a fixed location
- * in EEPROM containing EEPROM_CHANNEL_* usage flags (LSB) and max regulatory
- * txpower (MSB).
- *
- * Entries immediately below are for 20 MHz channel width. FAT (40 MHz)
- * channels (only for 4965, not supported by 3945) appear later in the EEPROM.
- *
- * 2.4 GHz channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
- */
-#define EEPROM_REGULATORY_BAND_1 (2*0x62) /* 2 bytes */
- u16 band_1_count; /* abs.ofs: 196 */
-#define EEPROM_REGULATORY_BAND_1_CHANNELS (2*0x63) /* 28 bytes */
- struct iwl4965_eeprom_channel band_1_channels[14]; /* abs.ofs: 196 */
-
-/*
- * 4.9 GHz channels 183, 184, 185, 187, 188, 189, 192, 196,
- * 5.0 GHz channels 7, 8, 11, 12, 16
- * (4915-5080MHz) (none of these is ever supported)
- */
-#define EEPROM_REGULATORY_BAND_2 (2*0x71) /* 2 bytes */
- u16 band_2_count; /* abs.ofs: 226 */
-#define EEPROM_REGULATORY_BAND_2_CHANNELS (2*0x72) /* 26 bytes */
- struct iwl4965_eeprom_channel band_2_channels[13]; /* abs.ofs: 228 */
-
-/*
- * 5.2 GHz channels 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
- * (5170-5320MHz)
- */
-#define EEPROM_REGULATORY_BAND_3 (2*0x7F) /* 2 bytes */
- u16 band_3_count; /* abs.ofs: 254 */
-#define EEPROM_REGULATORY_BAND_3_CHANNELS (2*0x80) /* 24 bytes */
- struct iwl4965_eeprom_channel band_3_channels[12]; /* abs.ofs: 256 */
-
-/*
- * 5.5 GHz channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
- * (5500-5700MHz)
- */
-#define EEPROM_REGULATORY_BAND_4 (2*0x8C) /* 2 bytes */
- u16 band_4_count; /* abs.ofs: 280 */
-#define EEPROM_REGULATORY_BAND_4_CHANNELS (2*0x8D) /* 22 bytes */
- struct iwl4965_eeprom_channel band_4_channels[11]; /* abs.ofs: 282 */
-
-/*
- * 5.7 GHz channels 145, 149, 153, 157, 161, 165
- * (5725-5825MHz)
- */
-#define EEPROM_REGULATORY_BAND_5 (2*0x98) /* 2 bytes */
- u16 band_5_count; /* abs.ofs: 304 */
-#define EEPROM_REGULATORY_BAND_5_CHANNELS (2*0x99) /* 12 bytes */
- struct iwl4965_eeprom_channel band_5_channels[6]; /* abs.ofs: 306 */
-
- u8 reserved10[2];
-
-
-/*
- * 2.4 GHz FAT channels 1 (5), 2 (6), 3 (7), 4 (8), 5 (9), 6 (10), 7 (11)
- *
- * The channel listed is the center of the lower 20 MHz half of the channel.
- * The overall center frequency is actually 2 channels (10 MHz) above that,
- * and the upper half of each FAT channel is centered 4 channels (20 MHz) away
- * from the lower half; e.g. the upper half of FAT channel 1 is channel 5,
- * and the overall FAT channel width centers on channel 3.
- *
- * NOTE: The RXON command uses 20 MHz channel numbers to specify the
- * control channel to which to tune. RXON also specifies whether the
- * control channel is the upper or lower half of a FAT channel.
- *
- * NOTE: 4965 does not support FAT channels on 2.4 GHz.
- */
-#define EEPROM_REGULATORY_BAND_24_FAT_CHANNELS (2*0xA0) /* 14 bytes */
- struct iwl4965_eeprom_channel band_24_channels[7]; /* abs.ofs: 320 */
- u8 reserved11[2];
-
-/*
- * 5.2 GHz FAT channels 36 (40), 44 (48), 52 (56), 60 (64),
- * 100 (104), 108 (112), 116 (120), 124 (128), 132 (136), 149 (153), 157 (161)
- */
-#define EEPROM_REGULATORY_BAND_52_FAT_CHANNELS (2*0xA8) /* 22 bytes */
- struct iwl4965_eeprom_channel band_52_channels[11]; /* abs.ofs: 336 */
- u8 reserved12[6];
-
-/*
- * 4965 driver requires txpower calibration format version 5 or greater.
- * Driver does not work with txpower calibration version < 5.
- * This value is simply a 16-bit number, no major/minor versions here.
- */
-#define EEPROM_CALIB_VERSION_OFFSET (2*0xB6) /* 2 bytes */
- u16 calib_version; /* abs.ofs: 364 */
- u8 reserved13[2];
- u8 reserved14[96]; /* abs.ofs: 368 */
-
-/*
- * 4965 Txpower calibration data.
- */
-#define EEPROM_IWL_CALIB_TXPOWER_OFFSET (2*0xE8) /* 48 bytes */
- struct iwl4965_eeprom_calib_info calib_info; /* abs.ofs: 464 */
-
- u8 reserved16[140]; /* fill out to full 1024 byte block */
-
-
-} __attribute__ ((packed));
-
-#define IWL_EEPROM_IMAGE_SIZE 1024
-
-/* End of EEPROM */
#include "iwl-4965-commands.h"
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index a79e8c383a3..dc55ff294b7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -38,6 +38,7 @@
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
+#include "iwl-eeprom.h"
#include "iwl-core.h"
#include "iwl-4965.h"
#include "iwl-helpers.h"
@@ -4824,10 +4825,23 @@ void iwl4965_hw_cancel_deferred_work(struct iwl4965_priv *priv)
cancel_delayed_work(&priv->init_alive_start);
}
+static struct iwl_lib_ops iwl4965_lib = {
+ .eeprom_ops = {
+ .verify_signature = iwlcore_eeprom_verify_signature,
+ .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
+ .release_semaphore = iwlcore_eeprom_release_semaphore,
+ },
+};
+
+static struct iwl_ops iwl4965_ops = {
+ .lib = &iwl4965_lib,
+};
+
static struct iwl_cfg iwl4965_agn_cfg = {
.name = "4965AGN",
.fw_name = "iwlwifi-4965" IWL4965_UCODE_API ".ucode",
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
+ .ops = &iwl4965_ops,
};
struct pci_device_id iwl4965_hw_card_ids[] = {
@@ -4836,35 +4850,4 @@ struct pci_device_id iwl4965_hw_card_ids[] = {
{0}
};
-/*
- * The device's EEPROM semaphore prevents conflicts between driver and uCode
- * when accessing the EEPROM; each access is a series of pulses to/from the
- * EEPROM chip, not a single event, so even reads could conflict if they
- * weren't arbitrated by the semaphore.
- */
-int iwl4965_eeprom_acquire_semaphore(struct iwl4965_priv *priv)
-{
- u16 count;
- int rc;
-
- for (count = 0; count < EEPROM_SEM_RETRY_LIMIT; count++) {
- /* Request semaphore */
- iwl4965_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
-
- /* See if we got it */
- rc = iwl4965_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
- CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
- EEPROM_SEM_TIMEOUT);
- if (rc >= 0) {
- IWL_DEBUG_IO("Acquired semaphore after %d tries.\n",
- count+1);
- return rc;
- }
- }
-
- return rc;
-}
-
MODULE_DEVICE_TABLE(pci, iwl4965_hw_card_ids);
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.h b/drivers/net/wireless/iwlwifi/iwl-4965.h
index 6ce40813736..f4e395fcb80 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.h
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.h
@@ -40,6 +40,7 @@
extern struct pci_device_id iwl4965_hw_card_ids[];
#define DRV_NAME "iwl4965"
+#include "iwl-eeprom.h"
#include "iwl-4965-hw.h"
#include "iwl-csr.h"
#include "iwl-prph.h"
@@ -640,7 +641,6 @@ extern u8 iwl4965_add_station_flags(struct iwl4965_priv *priv, const u8 *addr,
extern int iwl4965_is_network_packet(struct iwl4965_priv *priv,
struct ieee80211_hdr *header);
extern int iwl4965_power_init_handle(struct iwl4965_priv *priv);
-extern int iwl4965_eeprom_init(struct iwl4965_priv *priv);
extern void iwl4965_handle_data_packet_monitor(struct iwl4965_priv *priv,
struct iwl4965_rx_mem_buffer *rxb,
void *data, short len,
@@ -746,8 +746,6 @@ struct iwl4965_priv;
/*
* Forward declare iwl-4965.c functions for iwl-base.c
*/
-extern int iwl4965_eeprom_acquire_semaphore(struct iwl4965_priv *priv);
-
extern int iwl4965_tx_queue_update_wr_ptr(struct iwl4965_priv *priv,
struct iwl4965_tx_queue *txq,
u16 byte_cnt);
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index b8383c83f18..9ca539861db 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -31,6 +31,7 @@
#include <linux/version.h>
#include "iwl-4965-debug.h"
+#include "iwl-eeprom.h"
#include "iwl-core.h"
MODULE_DESCRIPTION("iwl core");
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index bdd32f89168..88fd49abdab 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -75,10 +75,20 @@
#define IWL_SKU_A 0x2
#define IWL_SKU_N 0x8
+struct iwl_lib_ops {
+ /* eeprom operations (as defined in iwl-eeprom.h) */
+ struct iwl_eeprom_ops eeprom_ops;
+};
+
+struct iwl_ops {
+ const struct iwl_lib_ops *lib;
+};
+
struct iwl_cfg {
const char *name;
const char *fw_name;
unsigned int sku;
+ const struct iwl_ops *ops;
};
#endif /* __iwl_core_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index ce1c3f68fde..d84a7f296d9 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -45,6 +45,7 @@
#include <asm/div64.h>
+#include "iwl-eeprom.h"
#include "iwl-core.h"
#include "iwl-4965.h"
#include "iwl-helpers.h"
@@ -1562,85 +1563,6 @@ static int iwl4965_send_beacon_cmd(struct iwl4965_priv *priv)
/******************************************************************************
*
- * EEPROM related functions
- *
- ******************************************************************************/
-
-static void get_eeprom_mac(struct iwl4965_priv *priv, u8 *mac)
-{
- memcpy(mac, priv->eeprom.mac_address, 6);
-}
-
-static inline void iwl4965_eeprom_release_semaphore(struct iwl4965_priv *priv)
-{
- iwl4965_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
-}
-
-/**
- * iwl4965_eeprom_init - read EEPROM contents
- *
- * Load the EEPROM contents from adapter into priv->eeprom
- *
- * NOTE: This routine uses the non-debug IO access functions.
- */
-int iwl4965_eeprom_init(struct iwl4965_priv *priv)
-{
- u16 *e = (u16 *)&priv->eeprom;
- u32 gp = iwl4965_read32(priv, CSR_EEPROM_GP);
- u32 r;
- int sz = sizeof(priv->eeprom);
- int rc;
- int i;
- u16 addr;
-
- /* The EEPROM structure has several padding buffers within it
- * and when adding new EEPROM maps is subject to programmer errors
- * which may be very difficult to identify without explicitly
- * checking the resulting size of the eeprom map. */
- BUILD_BUG_ON(sizeof(priv->eeprom) != IWL_EEPROM_IMAGE_SIZE);
-
- if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
- IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
- return -ENOENT;
- }
-
- /* Make sure driver (instead of uCode) is allowed to read EEPROM */
- rc = iwl4965_eeprom_acquire_semaphore(priv);
- if (rc < 0) {
- IWL_ERROR("Failed to acquire EEPROM semaphore.\n");
- return -ENOENT;
- }
-
- /* eeprom is an array of 16bit values */
- for (addr = 0; addr < sz; addr += sizeof(u16)) {
- _iwl4965_write32(priv, CSR_EEPROM_REG, addr << 1);
- _iwl4965_clear_bit(priv, CSR_EEPROM_REG, CSR_EEPROM_REG_BIT_CMD);
-
- for (i = 0; i < IWL_EEPROM_ACCESS_TIMEOUT;
- i += IWL_EEPROM_ACCESS_DELAY) {
- r = _iwl4965_read_direct32(priv, CSR_EEPROM_REG);
- if (r & CSR_EEPROM_REG_READ_VALID_MSK)
- break;
- udelay(IWL_EEPROM_ACCESS_DELAY);
- }
-
- if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
- IWL_ERROR("Time out reading EEPROM[%d]", addr);
- rc = -ETIMEDOUT;
- goto done;
- }
- e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
- }
- rc = 0;
-
-done:
- iwl4965_eeprom_release_semaphore(priv);
- return rc;
-}
-
-/******************************************************************************
- *
* Misc. internal state and helper functions
*
******************************************************************************/
@@ -8765,13 +8687,13 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
goto out_remove_sysfs;
}
/* Read the EEPROM */
- err = iwl4965_eeprom_init(priv);
+ err = iwl_eeprom_init(priv);
if (err) {
IWL_ERROR("Unable to init EEPROM\n");
goto out_remove_sysfs;
}
/* MAC Address location in EEPROM same for 3945/4965 */
- get_eeprom_mac(priv, priv->mac_addr);
+ iwl_eeprom_get_mac(priv, priv->mac_addr);
IWL_DEBUG_INFO("MAC address: %s\n", print_mac(mac, priv->mac_addr));
SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);