diff options
| author | Brajesh Dave <brajeshd@marvell.com> | 2007-11-20 17:44:14 -0500 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2008-01-28 15:04:52 -0800 |
| commit | 01d77d8d4747d73cfb6daf35cdc906a2db8ded9d (patch) | |
| tree | 2b6263df131d602fae21365ecb10f0c1a1e88ea0 /drivers/net/wireless/libertas/cmd.c | |
| parent | 798fbfec9ca1dfd656963debb14d049868d24465 (diff) | |
libertas: separate mesh connectivity from that of the main interface
The transmit and receive traffic as soon as the mesh interface is
brought up.
Test case 1: Bring up only the mesh interface and ping. No need for
any iwconfig commands on the main interface.
$ ifconfig msh0 192.168.5.3
$ iwconfig msh0 channel X
$ ping 192.168.5.2
If ping succeeds, PASS
Test case 2: Associate with the main interface, and turn off AP. Mesh
interface should not lose connectivity.
$ iwconfig eth0 mode managed essid "my_ssid"
$ ifconfig msh0 192.168.5.3
$ ping 192.168.5.2
<turn off access point>
If ping continues uninterrupted, PASS
This feature requires firmware version 5.110.19.p0 or newer, available
here: http://dev.laptop.org/pub/firmware/libertas/
Signed-off-by: Ashish Shukla <ashishs@marvell.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/libertas/cmd.c')
| -rw-r--r-- | drivers/net/wireless/libertas/cmd.c | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 5b2a1c7c5f0..b4d1b148584 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -1755,7 +1755,8 @@ int lbs_execute_next_command(lbs_private * priv) */ if ((adapter->psmode != LBS802_11POWERMODECAM) && (adapter->psstate == PS_STATE_FULL_POWER) && - (adapter->connect_status == LBS_CONNECTED)) { + ((adapter->connect_status == LBS_CONNECTED) || + (adapter->mesh_connect_status == LBS_CONNECTED))) { if (adapter->secinfo.WPAenabled || adapter->secinfo.WPA2enabled) { /* check for valid WPA group keys */ |