Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:

	drivers/net/wireless/iwlwifi/iwl4965-base.c

12 files changed, 123 insertions, 83 deletions

diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index 36a9c42df83..76f4c7bad8b 100644
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -72,6 +72,9 @@ static void b43_led_brightness_set(struct led_classdev *led_dev,
 	struct b43_wldev *dev = led->dev;
 	bool radio_enabled;
 
+	if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED))
+		return;
+
 	/* Checking the radio-enabled status here is slightly racy,
 	 * but we want to avoid the locking overhead and we don't care
 	 * whether the LED has the wrong state for a second. */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 7bca8e98151..704dd3551ff 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2976,12 +2976,11 @@ static int b43_op_tx(struct ieee80211_hw *hw,
 
 	if (unlikely(skb->len < 2 + 2 + 6)) {
 		/* Too short, this can't be a valid frame. */
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
+		goto drop_packet;
 	}
 	B43_WARN_ON(skb_shinfo(skb)->nr_frags);
 	if (unlikely(!dev))
-		return NETDEV_TX_BUSY;
+		goto drop_packet;
 
 	/* Transmissions on seperate queues can run concurrently. */
 	read_lock_irqsave(&wl->tx_lock, flags);
@@ -2997,7 +2996,12 @@ static int b43_op_tx(struct ieee80211_hw *hw,
 	read_unlock_irqrestore(&wl->tx_lock, flags);
 
 	if (unlikely(err))
-		return NETDEV_TX_BUSY;
+		goto drop_packet;
+	return NETDEV_TX_OK;
+
+drop_packet:
+	/* We can not transmit this packet. Drop it. */
+	dev_kfree_skb_any(skb);
 	return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c
index 33cc256c5ba..203b0f42ac5 100644
--- a/drivers/net/wireless/b43legacy/dma.c
+++ b/drivers/net/wireless/b43legacy/dma.c
@@ -876,6 +876,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev,
 	if (!ring)
 		goto out;
 	ring->type = type;
+	ring->dev = dev;
 
 	nr_slots = B43legacy_RXRING_SLOTS;
 	if (for_tx)
@@ -922,7 +923,6 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev,
 				 DMA_TO_DEVICE);
 	}
 
-	ring->dev = dev;
 	ring->nr_slots = nr_slots;
 	ring->mmio_base = b43legacy_dmacontroller_base(type, controller_index);
 	ring->index = controller_index;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 5f533b93ad5..069157eea05 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2377,8 +2377,10 @@ static int b43legacy_op_tx(struct ieee80211_hw *hw,
 	} else
 		err = b43legacy_dma_tx(dev, skb);
 out:
-	if (unlikely(err))
-		return NETDEV_TX_BUSY;
+	if (unlikely(err)) {
+		/* Drop the packet. */
+		dev_kfree_skb_any(skb);
+	}
 	return NETDEV_TX_OK;
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 5ca181f7125..5b420b43af5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -276,13 +276,18 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 	cancel_delayed_work(&priv->scan_check);
 
 	IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
-		       (priv->scan_bands == 2) ? "2.4" : "5.2",
+		       (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
+						"2.4" : "5.2",
 		       jiffies_to_msecs(elapsed_jiffies
 					(priv->scan_pass_start, jiffies)));
 
-	/* Remove this scanned band from the list
-	 * of pending bands to scan */
-	priv->scan_bands--;
+	/* Remove this scanned band from the list of pending
+	 * bands to scan, band G precedes A in order of scanning
+	 * as seen in iwl_bg_request_scan */
+	if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
+		priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
+	else if (priv->scan_bands &  BIT(IEEE80211_BAND_5GHZ))
+		priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
 
 	/* If a request to abort was given, or the scan did not succeed
 	 * then we reset the scan state machine and terminate,
@@ -292,7 +297,7 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 		clear_bit(STATUS_SCAN_ABORTING, &priv->status);
 	} else {
 		/* If there are more bands on this scan pass reschedule */
-		if (priv->scan_bands > 0)
+		if (priv->scan_bands)
 			goto reschedule;
 	}
 
@@ -389,7 +394,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv,
 
 		ch_info = iwl_get_channel_info(priv, band, scan_ch->channel);
 		if (!is_channel_valid(ch_info)) {
-			IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+			IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
 				       scan_ch->channel);
 			continue;
 		}
@@ -465,7 +470,10 @@ int iwl_scan_initiate(struct iwl_priv *priv)
 	}
 
 	IWL_DEBUG_INFO("Starting scan...\n");
-	priv->scan_bands = 2;
+	if (priv->cfg->sku & IWL_SKU_G)
+		priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+	if (priv->cfg->sku & IWL_SKU_A)
+		priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
 	set_bit(STATUS_SCANNING, &priv->status);
 	priv->scan_start = jiffies;
 	priv->scan_pass_start = priv->scan_start;
@@ -803,8 +811,7 @@ static void iwl_bg_request_scan(struct work_struct *data)
 	scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 
 
-	switch (priv->scan_bands) {
-	case 2:
+	if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
 		band = IEEE80211_BAND_2GHZ;
 		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
 		tx_ant = iwl_scan_tx_ant(priv, band);
@@ -818,9 +825,7 @@ static void iwl_bg_request_scan(struct work_struct *data)
 							tx_ant |
 							RATE_MCS_CCK_MSK);
 		scan->good_CRC_th = 0;
-		break;
-
-	case 1:
+	} else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
 		band = IEEE80211_BAND_5GHZ;
 		tx_ant = iwl_scan_tx_ant(priv, band);
 		scan->tx_cmd.rate_n_flags =
@@ -833,9 +838,7 @@ static void iwl_bg_request_scan(struct work_struct *data)
 		 * MIMO is not used here, but value is required */
 		if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
 			rx_chain = 0x6;
-
-		break;
-	default:
+	} else {
 		IWL_WARNING("Invalid scan band count\n");
 		goto done;
 	}
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 47cf4b997f5..92d1b2e312d 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2217,7 +2217,10 @@ static int iwl3945_scan_initiate(struct iwl3945_priv *priv)
 	}
 
 	IWL_DEBUG_INFO("Starting scan...\n");
-	priv->scan_bands = 2;
+	if (priv->cfg->sku & IWL_SKU_G)
+		priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ);
+	if (priv->cfg->sku & IWL_SKU_A)
+		priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ);
 	set_bit(STATUS_SCANNING, &priv->status);
 	priv->scan_start = jiffies;
 	priv->scan_pass_start = priv->scan_start;
@@ -3342,13 +3345,18 @@ static void iwl3945_rx_scan_complete_notif(struct iwl3945_priv *priv,
 	cancel_delayed_work(&priv->scan_check);
 
 	IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n",
-		       (priv->scan_bands == 2) ? "2.4" : "5.2",
+		       (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
+							"2.4" : "5.2",
 		       jiffies_to_msecs(elapsed_jiffies
 					(priv->scan_pass_start, jiffies)));
 
-	/* Remove this scanned band from the list
-	 * of pending bands to scan */
-	priv->scan_bands--;
+	/* Remove this scanned band from the list of pending
+	 * bands to scan, band G precedes A in order of scanning
+	 * as seen in iwl3945_bg_request_scan */
+	if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ))
+		priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ);
+	else if (priv->scan_bands &  BIT(IEEE80211_BAND_5GHZ))
+		priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ);
 
 	/* If a request to abort was given, or the scan did not succeed
 	 * then we reset the scan state machine and terminate,
@@ -4961,7 +4969,7 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv,
 
 		ch_info = iwl3945_get_channel_info(priv, band, scan_ch->channel);
 		if (!is_channel_valid(ch_info)) {
-			IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n",
+			IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n",
 				       scan_ch->channel);
 			continue;
 		}
@@ -6316,21 +6324,16 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 
 	/* flags + rate selection */
 
-	switch (priv->scan_bands) {
-	case 2:
+	if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) {
 		scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
 		scan->tx_cmd.rate = IWL_RATE_1M_PLCP;
 		scan->good_CRC_th = 0;
 		band = IEEE80211_BAND_2GHZ;
-		break;
-
-	case 1:
+	} else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
 		scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
 		scan->good_CRC_th = IWL_GOOD_CRC_TH;
 		band = IEEE80211_BAND_5GHZ;
-		break;
-
-	default:
+	} else {
 		IWL_WARNING("Invalid scan band count\n");
 		goto done;
 	}
@@ -6770,7 +6773,7 @@ static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co
 	ch_info = iwl3945_get_channel_info(priv, conf->channel->band,
 					   conf->channel->hw_value);
 	if (!is_channel_valid(ch_info)) {
-		IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this SKU.\n",
+		IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this band.\n",
 			       conf->channel->hw_value, conf->channel->band);
 		IWL_DEBUG_MAC80211("leave - invalid channel\n");
 		spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index 762e85bef55..e43bae97ed8 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -290,7 +290,7 @@ islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb)
 
 		avs->version = cpu_to_be32(P80211CAPTURE_VERSION);
 		avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header));
-		avs->mactime = cpu_to_be64(le64_to_cpu(clock));
+		avs->mactime = cpu_to_be64(clock);
 		avs->hosttime = cpu_to_be64(jiffies);
 		avs->phytype = cpu_to_be32(6);	/*OFDM: 6 for (g), 8 for (a) */
 		avs->channel = cpu_to_be32(channel_of_freq(freq));
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 9851cefaabf..0462d6d35b8 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -138,11 +138,8 @@ static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 	 * Wait until the BBP becomes ready.
 	 */
 	reg = rt2500usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
-		ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
-		mutex_unlock(&rt2x00dev->usb_cache_mutex);
-		return;
-	}
+	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
+		goto exit_fail;
 
 	/*
 	 * Write the data into the BBP.
@@ -155,6 +152,13 @@ static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 	rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg);
 
 	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	return;
+
+exit_fail:
+	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
 }
 
 static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -168,10 +172,8 @@ static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 	 * Wait until the BBP becomes ready.
 	 */
 	reg = rt2500usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
-		ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
-		return;
-	}
+	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
+		goto exit_fail;
 
 	/*
 	 * Write the request into the BBP.
@@ -186,17 +188,21 @@ static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 	 * Wait until the BBP becomes ready.
 	 */
 	reg = rt2500usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
-		ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
-		*value = 0xff;
-		mutex_unlock(&rt2x00dev->usb_cache_mutex);
-		return;
-	}
+	if (rt2x00_get_field16(reg, PHY_CSR8_BUSY))
+		goto exit_fail;
 
 	rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, &reg);
 	*value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
 
 	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	return;
+
+exit_fail:
+	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
+	*value = 0xff;
 }
 
 static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 0da8f972a1b..52d8e968821 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -818,6 +818,7 @@ struct rt2x00_dev {
 	/*
 	 * Scheduled work.
 	 */
+	struct workqueue_struct *workqueue;
 	struct work_struct intf_work;
 	struct work_struct filter_work;
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 9ea677320da..cc4fee105ed 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -74,7 +74,7 @@ static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
 
 	rt2x00lib_reset_link_tuner(rt2x00dev);
 
-	queue_delayed_work(rt2x00dev->hw->workqueue,
+	queue_delayed_work(rt2x00dev->workqueue,
 			   &rt2x00dev->link.work, LINK_TUNE_INTERVAL);
 }
 
@@ -138,14 +138,6 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
 		return;
 
 	/*
-	 * Stop all scheduled work.
-	 */
-	if (work_pending(&rt2x00dev->intf_work))
-		cancel_work_sync(&rt2x00dev->intf_work);
-	if (work_pending(&rt2x00dev->filter_work))
-		cancel_work_sync(&rt2x00dev->filter_work);
-
-	/*
 	 * Stop the TX queues.
 	 */
 	ieee80211_stop_queues(rt2x00dev->hw);
@@ -400,8 +392,8 @@ static void rt2x00lib_link_tuner(struct work_struct *work)
 	 * Increase tuner counter, and reschedule the next link tuner run.
 	 */
 	rt2x00dev->link.count++;
-	queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work,
-			   LINK_TUNE_INTERVAL);
+	queue_delayed_work(rt2x00dev->workqueue,
+			   &rt2x00dev->link.work, LINK_TUNE_INTERVAL);
 }
 
 static void rt2x00lib_packetfilter_scheduled(struct work_struct *work)
@@ -434,6 +426,15 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
 
 	spin_unlock(&intf->lock);
 
+	/*
+	 * It is possible the radio was disabled while the work had been
+	 * scheduled. If that happens we should return here immediately,
+	 * note that in the spinlock protected area above the delayed_flags
+	 * have been cleared correctly.
+	 */
+	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
+		return;
+
 	if (delayed_flags & DELAYED_UPDATE_BEACON) {
 		skb = ieee80211_beacon_get(rt2x00dev->hw, vif);
 		if (skb &&
@@ -442,7 +443,7 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
 	}
 
 	if (delayed_flags & DELAYED_CONFIG_ERP)
-		rt2x00lib_config_erp(rt2x00dev, intf, &intf->conf);
+		rt2x00lib_config_erp(rt2x00dev, intf, &conf);
 
 	if (delayed_flags & DELAYED_LED_ASSOC)
 		rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated);
@@ -488,7 +489,7 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
 						   rt2x00lib_beacondone_iter,
 						   rt2x00dev);
 
-	queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
+	queue_work(rt2x00dev->workqueue, &rt2x00dev->intf_work);
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
 
@@ -1003,6 +1004,10 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize configuration work.
 	 */
+	rt2x00dev->workqueue = create_singlethread_workqueue("rt2x00lib");
+	if (!rt2x00dev->workqueue)
+		goto exit;
+
 	INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
 	INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled);
 	INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner);
@@ -1063,6 +1068,13 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 	rt2x00leds_unregister(rt2x00dev);
 
 	/*
+	 * Stop all queued work. Note that most tasks will already be halted
+	 * during rt2x00lib_disable_radio() and rt2x00lib_uninitialize().
+	 */
+	flush_workqueue(rt2x00dev->workqueue);
+	destroy_workqueue(rt2x00dev->workqueue);
+
+	/*
 	 * Free ieee80211_hw memory.
 	 */
 	rt2x00lib_remove_hw(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index c90992f613f..1253da89295 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -431,7 +431,7 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
 	if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags))
 		rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags);
 	else
-		queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work);
+		queue_work(rt2x00dev->workqueue, &rt2x00dev->filter_work);
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter);
 
@@ -512,7 +512,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 	memcpy(&intf->conf, bss_conf, sizeof(*bss_conf));
 	if (delayed) {
 		intf->delayed_flags |= delayed;
-		queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
+		queue_work(rt2x00dev->workqueue, &rt2x00dev->intf_work);
 	}
 	spin_unlock(&intf->lock);
 }
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index fceefd730ab..675ff7900ee 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -134,11 +134,8 @@ static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 	 * Wait until the BBP becomes ready.
 	 */
 	reg = rt73usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
-		ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
-		mutex_unlock(&rt2x00dev->usb_cache_mutex);
-		return;
-	}
+	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
+		goto exit_fail;
 
 	/*
 	 * Write the data into the BBP.
@@ -151,6 +148,13 @@ static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
 
 	rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
 	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	return;
+
+exit_fail:
+	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
 }
 
 static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -164,11 +168,8 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 	 * Wait until the BBP becomes ready.
 	 */
 	reg = rt73usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
-		ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
-		mutex_unlock(&rt2x00dev->usb_cache_mutex);
-		return;
-	}
+	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
+		goto exit_fail;
 
 	/*
 	 * Write the request into the BBP.
@@ -184,14 +185,19 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
 	 * Wait until the BBP becomes ready.
 	 */
 	reg = rt73usb_bbp_check(rt2x00dev);
-	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) {
-		ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
-		*value = 0xff;
-		return;
-	}
+	if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
+		goto exit_fail;
 
 	*value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
 	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	return;
+
+exit_fail:
+	mutex_unlock(&rt2x00dev->usb_cache_mutex);
+
+	ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
+	*value = 0xff;
 }
 
 static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev,