aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
diff options
context:
space:
mode:
authorNick Kossifidis <mick@madwifi-project.org>2009-04-30 15:55:44 -0400
committerJohn W. Linville <linville@tuxdriver.com>2009-05-06 15:14:55 -0400
commita082381044ce026e83dbd17f8837722b028fc07d (patch)
tree181ef0bcdf8b69fa5aaf20da4b1e811feb57abd6 /drivers/net/wireless
parent15e469284d5e89c9113379b68566b0e059a97704 (diff)
ath5k: Allow user/driver to set txpower
* Now that we have regulatory control enable the driver to set txpower on hw * Also use txpower table offset so that we can match power range set by user/driver with indices on power table. Tested 2 different cards (a CM9 and an RF5112-based ubnt) and got the same output using a remote machine to measure per-packet rssi (conected the cards using attenuators). I also switched between various tx power levels and i saw an equal power change on the remote machine (so txpower changes as expected) and verified that we have the same output on each rate. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/ath/ath5k/ath5k.h7
-rw-r--r--drivers/net/wireless/ath/ath5k/base.c11
-rw-r--r--drivers/net/wireless/ath/ath5k/phy.c45
-rw-r--r--drivers/net/wireless/ath/ath5k/reset.c2
4 files changed, 52 insertions, 13 deletions
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 60c6d2edc4b..04b73453f6a 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1100,11 +1100,12 @@ struct ath5k_hw {
/* Values in 0.25dB units */
s16 txp_min_pwr;
s16 txp_max_pwr;
+ /* Values in 0.5dB units */
s16 txp_offset;
s16 txp_ofdm;
- /* Values in dB units */
- s16 txp_cck_ofdm_pwr_delta;
s16 txp_cck_ofdm_gainf_delta;
+ /* Value in dB units */
+ s16 txp_cck_ofdm_pwr_delta;
} ah_txpower;
struct {
@@ -1271,7 +1272,7 @@ extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
/* TX power setup */
extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower);
-extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 ee_mode, u8 txpower);
+extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
/*
* Functions used internaly
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 7b80cebffd4..d70856a9520 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2747,12 +2747,21 @@ static int
ath5k_config(struct ieee80211_hw *hw, u32 changed)
{
struct ath5k_softc *sc = hw->priv;
+ struct ath5k_hw *ah = sc->ah;
struct ieee80211_conf *conf = &hw->conf;
int ret;
mutex_lock(&sc->lock);
- sc->power_level = conf->power_level;
+ sc->bintval = conf->beacon_int;
+
+ if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
+ (sc->power_level != conf->power_level)) {
+ sc->power_level = conf->power_level;
+
+ /* Half dB steps */
+ ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
+ }
ret = ath5k_chan_set(sc, conf->channel);
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index b48b29dca3d..bb61b8e2dce 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -168,9 +168,6 @@ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
* tx power and a Peak to Average Power Detector (PAPD) will try
* to measure the gain.
*
- * TODO: Use propper tx power setting for the probe packet so
- * that we don't observe a serious power drop on the receiver
- *
* XXX: How about forcing a tx packet (bypassing PCU arbitrator etc)
* just after we enable the probe so that we don't mess with
* standard traffic ? Maybe it's time to use sw interrupts and
@@ -186,7 +183,7 @@ static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
/* Send the packet with 2dB below max power as
* patent doc suggest */
- ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max_pwr - 4,
+ ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_ofdm - 4,
AR5K_PHY_PAPD_PROBE_TXPOWER) |
AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);
@@ -2482,8 +2479,19 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
for (i = 8; i <= 15; i++)
rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta;
- ah->ah_txpower.txp_min_pwr = rates[7];
- ah->ah_txpower.txp_max_pwr = rates[0];
+ /* Now that we have all rates setup use table offset to
+ * match the power range set by user with the power indices
+ * on PCDAC/PDADC table */
+ for (i = 0; i < 16; i++) {
+ rates[i] += ah->ah_txpower.txp_offset;
+ /* Don't get out of bounds */
+ if (rates[i] > 63)
+ rates[i] = 63;
+ }
+
+ /* Min/max in 0.25dB units */
+ ah->ah_txpower.txp_min_pwr = 2 * rates[7];
+ ah->ah_txpower.txp_max_pwr = 2 * rates[0];
ah->ah_txpower.txp_ofdm = rates[7];
}
@@ -2591,16 +2599,37 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
return 0;
}
-int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 mode, u8 txpower)
+int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
{
/*Just a try M.F.*/
struct ieee80211_channel *channel = &ah->ah_current_channel;
+ u8 ee_mode;
ATH5K_TRACE(ah->ah_sc);
+
+ switch (channel->hw_value & CHANNEL_MODES) {
+ case CHANNEL_A:
+ case CHANNEL_T:
+ case CHANNEL_XR:
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ case CHANNEL_G:
+ case CHANNEL_TG:
+ ee_mode = AR5K_EEPROM_MODE_11G;
+ break;
+ case CHANNEL_B:
+ ee_mode = AR5K_EEPROM_MODE_11B;
+ break;
+ default:
+ ATH5K_ERR(ah->ah_sc,
+ "invalid channel: %d\n", channel->center_freq);
+ return -EINVAL;
+ }
+
ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER,
"changing txpower to %d\n", txpower);
- return ath5k_hw_txpower(ah, channel, mode, txpower);
+ return ath5k_hw_txpower(ah, channel, ee_mode, txpower);
}
#undef _ATH5K_PHY
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 775fdf78554..cb8a9a1398c 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -1000,7 +1000,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
* Set TX power (FIXME)
*/
ret = ath5k_hw_txpower(ah, channel, ee_mode,
- AR5K_TUNE_DEFAULT_TXPOWER);
+ ah->ah_txpower.txp_max_pwr / 2);
if (ret)
return ret;