Merge /scratch/Ksrc/linux-git/

8 files changed, 42 insertions, 45 deletions

diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c
index ad17f17e8e7..111601ca4ca 100644
--- a/drivers/net/3c505.c
+++ b/drivers/net/3c505.c
@@ -272,7 +272,7 @@ static inline void set_hsf(struct net_device *dev, int hsf)
 
 static int start_receive(struct net_device *, pcb_struct *);
 
-inline static void adapter_reset(struct net_device *dev)
+static inline void adapter_reset(struct net_device *dev)
 {
 	unsigned long timeout;
 	elp_device *adapter = dev->priv;
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 5a4a08a7c95..4c2cf7bbd25 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -126,14 +126,14 @@
 #define USE_IO_OPS 1
 #endif
 
-/* define to 1 to enable copious debugging info */
-#undef RTL8139_DEBUG
+/* define to 1, 2 or 3 to enable copious debugging info */
+#define RTL8139_DEBUG 0
 
 /* define to 1 to disable lightweight runtime debugging checks */
 #undef RTL8139_NDEBUG
 
 
-#ifdef RTL8139_DEBUG
+#if RTL8139_DEBUG
 /* note: prints function name for you */
 #  define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args)
 #else
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 534b598866b..8a835eb5880 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -23,9 +23,12 @@ config NETDEVICES
 
 	  If unsure, say Y.
 
+# All the following symbols are dependent on NETDEVICES - do not repeat
+# that for each of the symbols.
+if NETDEVICES
+
 config DUMMY
 	tristate "Dummy net driver support"
-	depends on NETDEVICES
 	---help---
 	  This is essentially a bit-bucket device (i.e. traffic you send to
 	  this device is consigned into oblivion) with a configurable IP
@@ -45,7 +48,6 @@ config DUMMY
 
 config BONDING
 	tristate "Bonding driver support"
-	depends on NETDEVICES
 	depends on INET
 	---help---
 	  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
@@ -63,7 +65,6 @@ config BONDING
 
 config EQUALIZER
 	tristate "EQL (serial line load balancing) support"
-	depends on NETDEVICES
 	---help---
 	  If you have two serial connections to some other computer (this
 	  usually requires two modems and two telephone lines) and you use
@@ -83,7 +84,6 @@ config EQUALIZER
 
 config TUN
 	tristate "Universal TUN/TAP device driver support"
-	depends on NETDEVICES
 	select CRC32
 	---help---
 	  TUN/TAP provides packet reception and transmission for user space
@@ -107,7 +107,7 @@ config TUN
 
 config NET_SB1000
 	tristate "General Instruments Surfboard 1000"
-	depends on NETDEVICES && PNP
+	depends on PNP
 	---help---
 	  This is a driver for the General Instrument (also known as
 	  NextLevel) SURFboard 1000 internal
@@ -129,16 +129,14 @@ config NET_SB1000
 
 	  If you don't have this card, of course say N.
 
-if NETDEVICES
 	source "drivers/net/arcnet/Kconfig"
-endif
 
 #
 #	Ethernet
 #
 
 menu "Ethernet (10 or 100Mbit)"
-	depends on NETDEVICES && !UML
+	depends on !UML
 
 config NET_ETHERNET
 	bool "Ethernet (10 or 100Mbit)"
@@ -1137,7 +1135,7 @@ config IBMLANA
 
 config IBMVETH
 	tristate "IBM LAN Virtual Ethernet support"
-	depends on NETDEVICES && NET_ETHERNET && PPC_PSERIES
+	depends on NET_ETHERNET && PPC_PSERIES
 	---help---
 	  This driver supports virtual ethernet adapters on newer IBM iSeries
 	  and pSeries systems.
@@ -1760,7 +1758,7 @@ endmenu
 #
 
 menu "Ethernet (1000 Mbit)"
-	depends on NETDEVICES && !UML
+	depends on !UML
 
 config ACENIC
 	tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
@@ -2091,7 +2089,7 @@ endmenu
 #
 
 menu "Ethernet (10000 Mbit)"
-	depends on NETDEVICES && !UML
+	depends on !UML
 
 config IXGB
 	tristate "Intel(R) PRO/10GbE support"
@@ -2186,11 +2184,11 @@ source "drivers/s390/net/Kconfig"
 
 config ISERIES_VETH
 	tristate "iSeries Virtual Ethernet driver support"
-	depends on NETDEVICES && PPC_ISERIES
+	depends on PPC_ISERIES
 
 config FDDI
 	bool "FDDI driver support"
-	depends on NETDEVICES && (PCI || EISA)
+	depends on (PCI || EISA)
 	help
 	  Fiber Distributed Data Interface is a high speed local area network
 	  design; essentially a replacement for high speed Ethernet. FDDI can
@@ -2239,7 +2237,7 @@ config SKFP
 
 config HIPPI
 	bool "HIPPI driver support (EXPERIMENTAL)"
-	depends on NETDEVICES && EXPERIMENTAL && INET && PCI
+	depends on EXPERIMENTAL && INET && PCI
 	help
 	  HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
 	  1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
@@ -2271,7 +2269,7 @@ config ROADRUNNER_LARGE_RINGS
 
 config PLIP
 	tristate "PLIP (parallel port) support"
-	depends on NETDEVICES && PARPORT
+	depends on PARPORT
 	---help---
 	  PLIP (Parallel Line Internet Protocol) is used to create a
 	  reasonably fast mini network consisting of two (or, rarely, more)
@@ -2307,7 +2305,6 @@ config PLIP
 
 config PPP
 	tristate "PPP (point-to-point protocol) support"
-	depends on NETDEVICES
 	---help---
 	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
 	  the same purpose: sending Internet traffic over telephone (and other
@@ -2443,7 +2440,6 @@ config PPPOATM
 
 config SLIP
 	tristate "SLIP (serial line) support"
-	depends on NETDEVICES
 	---help---
 	  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
 	  connect to your Internet service provider or to connect to some
@@ -2510,7 +2506,7 @@ config SLIP_MODE_SLIP6
 
 config NET_FC
 	bool "Fibre Channel driver support"
-	depends on NETDEVICES && SCSI && PCI
+	depends on SCSI && PCI
 	help
 	  Fibre Channel is a high speed serial protocol mainly used to connect
 	  large storage devices to the computer; it is compatible with and
@@ -2523,7 +2519,7 @@ config NET_FC
 
 config SHAPER
 	tristate "Traffic Shaper (EXPERIMENTAL)"
-	depends on NETDEVICES && EXPERIMENTAL
+	depends on EXPERIMENTAL
 	---help---
 	  The traffic shaper is a virtual network device that allows you to
 	  limit the rate of outgoing data flow over some other network device.
@@ -2544,11 +2540,13 @@ config SHAPER
 
 config NETCONSOLE
 	tristate "Network console logging support (EXPERIMENTAL)"
-	depends on NETDEVICES && INET && EXPERIMENTAL
+	depends on EXPERIMENTAL
 	---help---
 	If you want to log kernel messages over the network, enable this.
 	See <file:Documentation/networking/netconsole.txt> for details.
 
+endif #NETDEVICES
+
 config NETPOLL
 	def_bool NETCONSOLE
 
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 8618012df06..d9ba8be72af 100755
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1290,7 +1290,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id, struct pt_regs *reg
 	writel(intr0, mmio + INT0);
 
 	/* Check if Receive Interrupt has occurred. */
-#if CONFIG_AMD8111E_NAPI
+#ifdef CONFIG_AMD8111E_NAPI
 	if(intr0 & RINT0){
 		if(netif_rx_schedule_prep(dev)){
 			/* Disable receive interupts */
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 6c57096aa2e..d209a1556b2 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -129,9 +129,9 @@ bad_clone_list[] __initdata = {
 #define NESM_START_PG	0x40	/* First page of TX buffer */
 #define NESM_STOP_PG	0x80	/* Last page +1 of RX ring */
 
-#ifdef CONFIG_PLAT_MAPPI
+#if defined(CONFIG_PLAT_MAPPI)
 #  define DCR_VAL 0x4b
-#elif CONFIG_PLAT_OAKS32R
+#elif defined(CONFIG_PLAT_OAKS32R)
 #  define DCR_VAL 0x48
 #else
 #  define DCR_VAL 0x49
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index 21537ee3a6a..1bd22cd40c7 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -160,7 +160,7 @@ static struct net_device_stats *plip_get_stats(struct net_device *dev);
 static int plip_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
 static int plip_preempt(void *handle);
 static void plip_wakeup(void *handle);
-
+
 enum plip_connection_state {
 	PLIP_CN_NONE=0,
 	PLIP_CN_RECEIVE,
@@ -231,8 +231,8 @@ struct net_local {
 	atomic_t kill_timer;
 	struct semaphore killed_timer_sem;
 };
-
-inline static void enable_parport_interrupts (struct net_device *dev)
+
+static inline void enable_parport_interrupts (struct net_device *dev)
 {
 	if (dev->irq != -1)
 	{
@@ -242,7 +242,7 @@ inline static void enable_parport_interrupts (struct net_device *dev)
 	}
 }
 
-inline static void disable_parport_interrupts (struct net_device *dev)
+static inline void disable_parport_interrupts (struct net_device *dev)
 {
 	if (dev->irq != -1)
 	{
@@ -252,7 +252,7 @@ inline static void disable_parport_interrupts (struct net_device *dev)
 	}
 }
 
-inline static void write_data (struct net_device *dev, unsigned char data)
+static inline void write_data (struct net_device *dev, unsigned char data)
 {
 	struct parport *port =
 	   ((struct net_local *)dev->priv)->pardev->port;
@@ -260,14 +260,14 @@ inline static void write_data (struct net_device *dev, unsigned char data)
 	port->ops->write_data (port, data);
 }
 
-inline static unsigned char read_status (struct net_device *dev)
+static inline unsigned char read_status (struct net_device *dev)
 {
 	struct parport *port =
 	   ((struct net_local *)dev->priv)->pardev->port;
 
 	return port->ops->read_status (port);
 }
-
+
 /* Entry point of PLIP driver.
    Probe the hardware, and register/initialize the driver.
 
@@ -316,7 +316,7 @@ plip_init_netdev(struct net_device *dev)
 
 	spin_lock_init(&nl->lock);
 }
-
+
 /* Bottom half handler for the delayed request.
    This routine is kicked by do_timer().
    Request `plip_bh' to be invoked. */
@@ -471,7 +471,7 @@ plip_bh_timeout_error(struct net_device *dev, struct net_local *nl,
 
 	return TIMEOUT;
 }
-
+
 static int
 plip_none(struct net_device *dev, struct net_local *nl,
 	  struct plip_local *snd, struct plip_local *rcv)
@@ -481,7 +481,7 @@ plip_none(struct net_device *dev, struct net_local *nl,
 
 /* PLIP_RECEIVE --- receive a byte(two nibbles)
    Returns OK on success, TIMEOUT on timeout */
-inline static int
+static inline int
 plip_receive(unsigned short nibble_timeout, struct net_device *dev,
 	     enum plip_nibble_state *ns_p, unsigned char *data_p)
 {
@@ -582,7 +582,6 @@ static __be16 plip_type_trans(struct sk_buff *skb, struct net_device *dev)
 	return htons(ETH_P_802_2);
 }
 
-
 /* PLIP_RECEIVE_PACKET --- receive a packet */
 static int
 plip_receive_packet(struct net_device *dev, struct net_local *nl,
@@ -702,7 +701,7 @@ plip_receive_packet(struct net_device *dev, struct net_local *nl,
 
 /* PLIP_SEND --- send a byte (two nibbles)
    Returns OK on success, TIMEOUT when timeout    */
-inline static int
+static inline int
 plip_send(unsigned short nibble_timeout, struct net_device *dev,
 	  enum plip_nibble_state *ns_p, unsigned char data)
 {
@@ -902,7 +901,7 @@ plip_error(struct net_device *dev, struct net_local *nl,
 
 	return OK;
 }
-
+
 /* Handle the parallel port interrupts. */
 static void
 plip_interrupt(int irq, void *dev_id, struct pt_regs * regs)
@@ -957,7 +956,7 @@ plip_interrupt(int irq, void *dev_id, struct pt_regs * regs)
 
 	spin_unlock_irq(&nl->lock);
 }
-
+
 static int
 plip_tx_packet(struct sk_buff *skb, struct net_device *dev)
 {
@@ -1238,7 +1237,7 @@ plip_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	}
 	return 0;
 }
-
+
 static int parport[PLIP_MAX] = { [0 ... PLIP_MAX-1] = -1 };
 static int timid;
 
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index 1b70b7c9758..d9a774b91dd 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -1414,7 +1414,7 @@ static inline void mac_get_cam(struct mac_regs __iomem * regs, int idx, u8 *addr
  *	the rest of the logic from the result of sleep/wakeup
  */
 
-inline static void mac_wol_reset(struct mac_regs __iomem * regs)
+static inline void mac_wol_reset(struct mac_regs __iomem * regs)
 {
 
 	/* Turn off SWPTAG right after leaving power mode */
@@ -1811,7 +1811,7 @@ struct velocity_info {
  *	CHECK ME: locking
  */
 
-inline static int velocity_get_ip(struct velocity_info *vptr)
+static inline int velocity_get_ip(struct velocity_info *vptr)
 {
 	struct in_device *in_dev = (struct in_device *) vptr->dev->ip_ptr;
 	struct in_ifaddr *ifa;
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 47f3c5d0203..df20adcd073 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -5013,7 +5013,7 @@ static void proc_SSID_on_close( struct inode *inode, struct file *file ) {
 	enable_MAC(ai, &rsp, 1);
 }
 
-inline static u8 hexVal(char c) {
+static inline u8 hexVal(char c) {
 	if (c>='0' && c<='9') return c -= '0';
 	if (c>='a' && c<='f') return c -= 'a'-10;
 	if (c>='A' && c<='F') return c -= 'A'-10;