aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/hotplug/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/pci/hotplug/Kconfig
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/pci/hotplug/Kconfig')
-rw-r--r--drivers/pci/hotplug/Kconfig197
1 files changed, 197 insertions, 0 deletions
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
new file mode 100644
index 00000000000..1a4d4ca2a4d
--- /dev/null
+++ b/drivers/pci/hotplug/Kconfig
@@ -0,0 +1,197 @@
+#
+# PCI Hotplug support
+#
+
+menu "PCI Hotplug Support"
+
+config HOTPLUG_PCI
+ tristate "Support for PCI Hotplug (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select HOTPLUG
+ ---help---
+ Say Y here if you have a motherboard with a PCI Hotplug controller.
+ This allows you to add and remove PCI cards while the machine is
+ powered up and running. The file system pcihpfs must be mounted
+ in order to interact with any PCI Hotplug controllers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pci_hotplug.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_FAKE
+ tristate "Fake PCI Hotplug driver"
+ depends on HOTPLUG_PCI
+ help
+ Say Y here if you want to use the fake PCI hotplug driver. It can
+ be used to simulate PCI hotplug events if even if your system is
+ not PCI hotplug capable.
+
+ This driver will "emulate" removing PCI devices from the system.
+ If the "power" file is written to with "0" then the specified PCI
+ device will be completely removed from the kernel.
+
+ WARNING, this does NOT turn off the power to the PCI device.
+ This is a "logical" removal, not a physical or electrical
+ removal.
+
+ Use this module at your own risk. You have been warned!
+
+ To compile this driver as a module, choose M here: the
+ module will be called fakephp.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_COMPAQ
+ tristate "Compaq PCI Hotplug driver"
+ depends on HOTPLUG_PCI && X86 && PCI_BIOS
+ help
+ Say Y here if you have a motherboard with a Compaq PCI Hotplug
+ controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cpqphp.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_COMPAQ_NVRAM
+ bool "Save configuration into NVRAM on Compaq servers"
+ depends on HOTPLUG_PCI_COMPAQ
+ help
+ Say Y here if you have a Compaq server that has a PCI Hotplug
+ controller. This will allow the PCI Hotplug driver to store the PCI
+ system configuration options in NVRAM.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_IBM
+ tristate "IBM PCI Hotplug driver"
+ depends on HOTPLUG_PCI && X86_IO_APIC && X86 && PCI_BIOS
+ help
+ Say Y here if you have a motherboard with a IBM PCI Hotplug
+ controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmphp.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_ACPI
+ tristate "ACPI PCI Hotplug driver"
+ depends on ACPI_BUS && HOTPLUG_PCI
+ help
+ Say Y here if you have a system that supports PCI Hotplug using
+ ACPI.
+
+ To compile this driver as a module, choose M here: the
+ module will be called acpiphp.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_ACPI_IBM
+ tristate "ACPI PCI Hotplug driver IBM extensions"
+ depends on HOTPLUG_PCI_ACPI
+ help
+ Say Y here if you have an IBM system that supports PCI Hotplug using
+ ACPI.
+
+ To compile this driver as a module, choose M here: the
+ module will be called acpiphp_ibm.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_CPCI
+ bool "CompactPCI Hotplug driver"
+ depends on HOTPLUG_PCI
+ help
+ Say Y here if you have a CompactPCI system card with CompactPCI
+ hotswap support per the PICMG 2.1 specification.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_CPCI_ZT5550
+ tristate "Ziatech ZT5550 CompactPCI Hotplug driver"
+ depends on HOTPLUG_PCI && HOTPLUG_PCI_CPCI && X86
+ help
+ Say Y here if you have an Performance Technologies (formerly Intel,
+ formerly just Ziatech) Ziatech ZT5550 CompactPCI system card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cpcihp_zt5550.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_CPCI_GENERIC
+ tristate "Generic port I/O CompactPCI Hotplug driver"
+ depends on HOTPLUG_PCI && HOTPLUG_PCI_CPCI && X86
+ help
+ Say Y here if you have a CompactPCI system card that exposes the #ENUM
+ hotswap signal as a bit in a system register that can be read through
+ standard port I/O.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cpcihp_generic.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_SHPC
+ tristate "SHPC PCI Hotplug driver"
+ depends on HOTPLUG_PCI
+ help
+ Say Y here if you have a motherboard with a SHPC PCI Hotplug
+ controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called shpchp.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_SHPC_POLL_EVENT_MODE
+ bool "Use polling mechanism for hot-plug events (for testing purpose)"
+ depends on HOTPLUG_PCI_SHPC
+ help
+ Say Y here if you want to use the polling mechanism for hot-plug
+ events for early platform testing.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_SHPC_PHPRM_LEGACY
+ bool "For AMD SHPC only: Use $HRT for resource/configuration"
+ depends on HOTPLUG_PCI_SHPC && !ACPI_BUS
+ help
+ Say Y here for AMD SHPC. You have to select this option if you are
+ using this driver on platform with AMD SHPC.
+
+config HOTPLUG_PCI_RPA
+ tristate "RPA PCI Hotplug driver"
+ depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
+ help
+ Say Y here if you have a a RPA system that supports PCI Hotplug.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rpaphp.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_RPA_DLPAR
+ tristate "RPA Dynamic Logical Partitioning for I/O slots"
+ depends on HOTPLUG_PCI_RPA
+ help
+ Say Y here if your system supports Dynamic Logical Partitioning
+ for I/O slots.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rpadlpar_io.
+
+ When in doubt, say N.
+
+config HOTPLUG_PCI_SGI
+ tristate "SGI PCI Hotplug Support"
+ depends on HOTPLUG_PCI && IA64_SGI_SN2
+ help
+ Say Y here if you have an SGI IA64 Altix system.
+
+ When in doubt, say N.
+
+endmenu
+