Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits)
  [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
  [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
  [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0
  [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
  imxfb: Fix TFT mode
  i.MX21/27: remove ifdef CONFIG_FB_IMX
  imxfb: add clock support
  mxc: add arch_reset() function
  clkdev: add possibility to get a clock based on the device name
  i.MX1: remove fb support from mach-imx
  [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
  Gemini: Add support for Teltonika RUT100
  Gemini: gpiolib based GPIO support v2
  MAINTAINERS: add myself as Gemini architecture maintainer
  ARM: Add Gemini architecture v3
  [ARM] OMAP: Fix compile for omap2_init_common_hw()
  MAINTAINERS: Add myself as Faraday ARM core variant maintainer
  ARM: Add support for FA526 v2
  [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
  [ARM] collie: fix two minor formatting nits
  ...

1 files changed, 48 insertions, 2 deletions

diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index 7cb1273202c..e15d59f2d8a 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -36,9 +36,9 @@
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 
@@ -163,9 +163,55 @@ sa1100_pcmcia_show_timing(struct soc_pcmcia_socket *skt, char *buf)
 	return p - buf;
 }
 
+static const char *skt_names[] = {
+	"PCMCIA socket 0",
+	"PCMCIA socket 1",
+};
+
+#define SKT_DEV_INFO_SIZE(n) \
+	(sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
+
 int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
 			    int first, int nr)
 {
+	struct skt_dev_info *sinfo;
+	struct soc_pcmcia_socket *skt;
+	int i;
+
+	sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
+	if (!sinfo)
+		return -ENOMEM;
+
+	sinfo->nskt = nr;
+
+	/* Initiliaze processor specific parameters */
+	for (i = 0; i < nr; i++) {
+		skt = &sinfo->skt[i];
+
+		skt->nr		= first + i;
+		skt->irq	= NO_IRQ;
+
+		skt->res_skt.start	= _PCMCIA(skt->nr);
+		skt->res_skt.end	= _PCMCIA(skt->nr) + PCMCIASp - 1;
+		skt->res_skt.name	= skt_names[skt->nr];
+		skt->res_skt.flags	= IORESOURCE_MEM;
+
+		skt->res_io.start	= _PCMCIAIO(skt->nr);
+		skt->res_io.end		= _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
+		skt->res_io.name	= "io";
+		skt->res_io.flags	= IORESOURCE_MEM | IORESOURCE_BUSY;
+
+		skt->res_mem.start	= _PCMCIAMem(skt->nr);
+		skt->res_mem.end	= _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
+		skt->res_mem.name	= "memory";
+		skt->res_mem.flags	= IORESOURCE_MEM;
+
+		skt->res_attr.start	= _PCMCIAAttr(skt->nr);
+		skt->res_attr.end	= _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
+		skt->res_attr.name	= "attribute";
+		skt->res_attr.flags	= IORESOURCE_MEM;
+	}
+
 	/*
 	 * set default MECR calculation if the board specific
 	 * code did not specify one...
@@ -180,7 +226,7 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
 	ops->frequency_change = sa1100_pcmcia_frequency_change;
 #endif
 
-	return soc_common_drv_pcmcia_probe(dev, ops, first, nr);
+	return soc_common_drv_pcmcia_probe(dev, ops, sinfo);
 }
 EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe);