aboutsummaryrefslogtreecommitdiff
path: root/drivers/power/bq27000_battery.c
diff options
context:
space:
mode:
authorLars-Peter Clausen <lars@metafoo.de>2009-09-23 14:54:06 +0200
committerLars-Peter Clausen <lars@metafoo.de>2009-09-23 14:54:06 +0200
commit6d41420c8e96a708ee34d1f765e73c0483ac7a06 (patch)
tree5829fb310a55604327137d0749ef534fd298ebbb /drivers/power/bq27000_battery.c
parent74fca6a42863ffacaf7ba6f1936a9f228950f657 (diff)
Add hdq and bq27000 driver.
Diffstat (limited to 'drivers/power/bq27000_battery.c')
-rw-r--r--drivers/power/bq27000_battery.c477
1 files changed, 477 insertions, 0 deletions
diff --git a/drivers/power/bq27000_battery.c b/drivers/power/bq27000_battery.c
new file mode 100644
index 00000000000..32655dce1f3
--- /dev/null
+++ b/drivers/power/bq27000_battery.c
@@ -0,0 +1,477 @@
+/*
+ * Driver for batteries with bq27000 chips inside via HDQ
+ *
+ * Copyright 2008 Openmoko, Inc
+ * Andy Green <andy@openmoko.com>
+ *
+ * based on ds2760 driver, original copyright notice for that --->
+ *
+ * Copyright © 2007 Anton Vorontsov
+ * 2004-2007 Matt Reimer
+ * 2004 Szabolcs Gyurko
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * Author: Anton Vorontsov <cbou@mail.ru>
+ * February 2007
+ *
+ * Matt Reimer <mreimer@vpop.net>
+ * April 2004, 2005, 2007
+ *
+ * Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
+ * September 2004
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/bq27000_battery.h>
+
+enum bq27000_regs {
+ /* RAM regs */
+ /* read-write after this */
+ BQ27000_CTRL = 0, /* Device Control Register */
+ BQ27000_MODE, /* Device Mode Register */
+ BQ27000_AR_L, /* At-Rate H L */
+ BQ27000_AR_H,
+ /* read-only after this */
+ BQ27000_ARTTE_L, /* At-Rate Time To Empty H L */
+ BQ27000_ARTTE_H,
+ BQ27000_TEMP_L, /* Reported Temperature H L */
+ BQ27000_TEMP_H,
+ BQ27000_VOLT_L, /* Reported Voltage H L */
+ BQ27000_VOLT_H,
+ BQ27000_FLAGS, /* Status Flags */
+ BQ27000_RSOC, /* Relative State of Charge */
+ BQ27000_NAC_L, /* Nominal Available Capacity H L */
+ BQ27000_NAC_H,
+ BQ27000_CACD_L, /* Discharge Compensated H L */
+ BQ27000_CACD_H,
+ BQ27000_CACT_L, /* Temperature Compensated H L */
+ BQ27000_CACT_H,
+ BQ27000_LMD_L, /* Last measured discharge H L */
+ BQ27000_LMD_H,
+ BQ27000_AI_L, /* Average Current H L */
+ BQ27000_AI_H,
+ BQ27000_TTE_L, /* Time to Empty H L */
+ BQ27000_TTE_H,
+ BQ27000_TTF_L, /* Time to Full H L */
+ BQ27000_TTF_H,
+ BQ27000_SI_L, /* Standby Current H L */
+ BQ27000_SI_H,
+ BQ27000_STTE_L, /* Standby Time To Empty H L */
+ BQ27000_STTE_H,
+ BQ27000_MLI_L, /* Max Load Current H L */
+ BQ27000_MLI_H,
+ BQ27000_MLTTE_L, /* Max Load Time To Empty H L */
+ BQ27000_MLTTE_H,
+ BQ27000_SAE_L, /* Available Energy H L */
+ BQ27000_SAE_H,
+ BQ27000_AP_L, /* Available Power H L */
+ BQ27000_AP_H,
+ BQ27000_TTECP_L, /* Time to Empty at Constant Power H L */
+ BQ27000_TTECP_H,
+ BQ27000_CYCL_L, /* Cycle count since learning cycle H L */
+ BQ27000_CYCL_H,
+ BQ27000_CYCT_L, /* Cycle Count Total H L */
+ BQ27000_CYCT_H,
+ BQ27000_CSOC, /* Compensated State Of Charge */
+ /* EEPROM regs */
+ /* read-write after this */
+ BQ27000_EE_EE_EN = 0x6e, /* EEPROM Program Enable */
+ BQ27000_EE_ILMD = 0x76, /* Initial Last Measured Discharge High Byte */
+ BQ27000_EE_SEDVF, /* Scaled EDVF Threshold */
+ BQ27000_EE_SEDV1, /* Scaled EDV1 Threshold */
+ BQ27000_EE_ISLC, /* Initial Standby Load Current */
+ BQ27000_EE_DMFSD, /* Digital Magnitude Filter and Self Discharge */
+ BQ27000_EE_TAPER, /* Aging Estimate Enable, Charge Termination Taper */
+ BQ27000_EE_PKCFG, /* Pack Configuration Values */
+ BQ27000_EE_IMLC, /* Initial Max Load Current or ID #3 */
+ BQ27000_EE_DCOMP, /* Discharge rate compensation constants or ID #2 */
+ BQ27000_EE_TCOMP, /* Temperature Compensation constants or ID #1 */
+};
+
+enum bq27000_status_flags {
+ BQ27000_STATUS_CHGS = 0x80, /* 1 = being charged */
+ BQ27000_STATUS_NOACT = 0x40, /* 1 = no activity */
+ BQ27000_STATUS_IMIN = 0x20, /* 1 = Lion taper current mode */
+ BQ27000_STATUS_CI = 0x10, /* 1 = capacity likely innacurate */
+ BQ27000_STATUS_CALIP = 0x08, /* 1 = calibration in progress */
+ BQ27000_STATUS_VDQ = 0x04, /* 1 = capacity should be accurate */
+ BQ27000_STATUS_EDV1 = 0x02, /* 1 = end of discharge.. <6% left */
+ BQ27000_STATUS_EDVF = 0x01, /* 1 = no, it's really empty now */
+};
+
+#define NANOVOLTS_UNIT 3750
+
+struct bq27000_bat_regs {
+ int ai;
+ int flags;
+ int lmd;
+ int rsoc;
+ int temp;
+ int tte;
+ int ttf;
+ int volt;
+};
+
+struct bq27000_device_info {
+ struct device *dev;
+ struct power_supply bat;
+ struct power_supply ac;
+ struct power_supply usb;
+ struct delayed_work work;
+ struct bq27000_platform_data *pdata;
+
+ struct bq27000_bat_regs regs;
+};
+
+static unsigned int cache_time = 5000;
+module_param(cache_time, uint, 0644);
+MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+
+/*
+ * reading 16 bit values over HDQ has a special hazard where the
+ * hdq device firmware can update the 16-bit register during the time we
+ * read the two halves. TI document SLUS556D recommends the algorithm here
+ * to avoid trouble
+ */
+
+static int hdq_read16(struct bq27000_device_info *di, int address)
+{
+ int acc;
+ int high;
+ int retries = 3;
+
+ while (retries--) {
+
+ high = (di->pdata->hdq_read)(address + 1); /* high part */
+
+ if (high < 0)
+ return high;
+ acc = (di->pdata->hdq_read)(address);
+ if (acc < 0)
+ return acc;
+
+ /* confirm high didn't change between reading it and low */
+ if (high == (di->pdata->hdq_read)(address + 1))
+ return (high << 8) | acc;
+ }
+
+ return -ETIME;
+}
+
+static void bq27000_battery_external_power_changed(struct power_supply *psy)
+{
+ struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat);
+
+ dev_dbg(di->dev, "%s\n", __FUNCTION__);
+ schedule_delayed_work(&di->work, 0);
+}
+
+static int bq27000_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int n;
+ struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat);
+
+ if (di->regs.rsoc < 0 && psp != POWER_SUPPLY_PROP_PRESENT)
+ return -ENODEV;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+ if (!di->pdata->get_charger_online_status)
+ goto use_bat;
+ if ((di->pdata->get_charger_online_status)()) {
+ /*
+ * charger is definitively present
+ * we report our state in terms of what it says it
+ * is doing
+ */
+ if (!di->pdata->get_charger_active_status)
+ goto use_bat;
+
+ if ((di->pdata->get_charger_active_status)()) {
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ }
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ }
+
+ /*
+ * platform provided definite indication of charger presence,
+ * and it is telling us it isn't there... but we are on so we
+ * must be running from battery --->
+ */
+
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+
+use_bat:
+ /*
+ * either the charger is not connected, or the
+ * platform doesn't give info about charger, use battery state
+ * but... battery state can be out of date by 4 seconds or
+ * so... use the platform callbacks if possible.
+ */
+
+ /* no real activity on the battery */
+ if (di->regs.ai < 2) {
+ if (!di->regs.ttf)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ }
+ /* power is actually going in or out... */
+ if (di->regs.flags < 0)
+ return di->regs.flags;
+ if (di->regs.flags & BQ27000_STATUS_CHGS)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+ /* Do we have accurate readings... */
+ if (di->regs.flags < 0)
+ return di->regs.flags;
+ if (di->regs.flags & BQ27000_STATUS_VDQ)
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (di->regs.volt < 0)
+ return di->regs.volt;
+ /* mV -> uV */
+ val->intval = di->regs.volt * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (di->regs.flags < 0)
+ return di->regs.flags;
+ if (di->regs.flags & BQ27000_STATUS_CHGS)
+ n = -NANOVOLTS_UNIT;
+ else
+ n = NANOVOLTS_UNIT;
+ if (di->regs.ai < 0)
+ return di->regs.ai;
+ val->intval = (di->regs.ai * n) / di->pdata->rsense_mohms;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ if (di->regs.lmd < 0)
+ return di->regs.lmd;
+ val->intval = (di->regs.lmd * 3570) / di->pdata->rsense_mohms;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ if (di->regs.temp < 0)
+ return di->regs.temp;
+ /* K (in 0.25K units) is 273.15 up from C (in 0.1C)*/
+ /* 10926 = 27315 * 4 / 10 */
+ val->intval = (((long)di->regs.temp * 10l) - 10926) / 4;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = di->regs.rsoc;
+ if (val->intval < 0)
+ return val->intval;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = !(di->regs.rsoc < 0);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ if (di->regs.tte < 0)
+ return di->regs.tte;
+ val->intval = 60 * di->regs.tte;
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+ if (di->regs.ttf < 0)
+ return di->regs.ttf;
+ val->intval = 60 * di->regs.ttf;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ if (di->pdata->get_charger_online_status)
+ val->intval = (di->pdata->get_charger_online_status)();
+ else
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void bq27000_battery_work(struct work_struct *work)
+{
+ struct bq27000_device_info *di =
+ container_of(work, struct bq27000_device_info, work.work);
+
+ if ((di->pdata->hdq_initialized)()) {
+ struct bq27000_bat_regs regs;
+
+ regs.ai = hdq_read16(di, BQ27000_AI_L);
+ regs.flags = (di->pdata->hdq_read)(BQ27000_FLAGS);
+ regs.lmd = hdq_read16(di, BQ27000_LMD_L);
+ regs.rsoc = (di->pdata->hdq_read)(BQ27000_RSOC);
+ regs.temp = hdq_read16(di, BQ27000_TEMP_L);
+ regs.tte = hdq_read16(di, BQ27000_TTE_L);
+ regs.ttf = hdq_read16(di, BQ27000_TTF_L);
+ regs.volt = hdq_read16(di, BQ27000_VOLT_L);
+
+ if (memcmp (&regs, &di->regs, sizeof(regs)) != 0) {
+ di->regs = regs;
+ power_supply_changed(&di->bat);
+ }
+ }
+
+ if (!schedule_delayed_work(&di->work, cache_time))
+ dev_err(di->dev, "battery service reschedule failed\n");
+}
+
+static enum power_supply_property bq27000_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_ONLINE
+};
+
+static int bq27000_battery_probe(struct platform_device *pdev)
+{
+ int retval = 0;
+ struct bq27000_device_info *di;
+ struct bq27000_platform_data *pdata;
+
+ dev_info(&pdev->dev, "BQ27000 Battery Driver (C) 2008 Openmoko, Inc\n");
+
+ di = kzalloc(sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ retval = -ENOMEM;
+ goto di_alloc_failed;
+ }
+
+ platform_set_drvdata(pdev, di);
+
+ pdata = pdev->dev.platform_data;
+ di->dev = &pdev->dev;
+ /* di->w1_dev = pdev->dev.parent; */
+ di->bat.name = pdata->name;
+ di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
+ di->bat.properties = bq27000_battery_props;
+ di->bat.num_properties = ARRAY_SIZE(bq27000_battery_props);
+ di->bat.get_property = bq27000_battery_get_property;
+ di->bat.external_power_changed =
+ bq27000_battery_external_power_changed;
+ di->bat.use_for_apm = 1;
+ di->pdata = pdata;
+
+ retval = power_supply_register(&pdev->dev, &di->bat);
+ if (retval) {
+ dev_err(di->dev, "failed to register battery\n");
+ goto batt_failed;
+ }
+
+ INIT_DELAYED_WORK(&di->work, bq27000_battery_work);
+
+ if (!schedule_delayed_work(&di->work, 0))
+ dev_err(di->dev, "failed to schedule bq27000_battery_work\n");
+
+ return 0;
+
+batt_failed:
+ kfree(di);
+di_alloc_failed:
+ return retval;
+}
+
+static int bq27000_battery_remove(struct platform_device *pdev)
+{
+ struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+ cancel_delayed_work(&di->work);
+
+ power_supply_unregister(&di->bat);
+
+ return 0;
+}
+
+void bq27000_charging_state_change(struct platform_device *pdev)
+{
+ struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+ if (!di)
+ return;
+}
+EXPORT_SYMBOL_GPL(bq27000_charging_state_change);
+
+#ifdef CONFIG_PM
+
+static int bq27000_battery_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+ cancel_delayed_work(&di->work);
+ return 0;
+}
+
+static int bq27000_battery_resume(struct platform_device *pdev)
+{
+ struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+ schedule_delayed_work(&di->work, 0);
+ return 0;
+}
+
+#else
+
+#define bq27000_battery_suspend NULL
+#define bq27000_battery_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct platform_driver bq27000_battery_driver = {
+ .driver = {
+ .name = "bq27000-battery",
+ },
+ .probe = bq27000_battery_probe,
+ .remove = bq27000_battery_remove,
+ .suspend = bq27000_battery_suspend,
+ .resume = bq27000_battery_resume,
+};
+
+static int __init bq27000_battery_init(void)
+{
+ return platform_driver_register(&bq27000_battery_driver);
+}
+
+static void __exit bq27000_battery_exit(void)
+{
+ platform_driver_unregister(&bq27000_battery_driver);
+}
+
+module_init(bq27000_battery_init);
+module_exit(bq27000_battery_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("bq27000 battery driver");