Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits)
  [NET]: Fix and allocate less memory for ->priv'less netdevices
  [IPV6]: Fix dangling references on error in fib6_add().
  [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found
  [PKT_SCHED]: Fix datalen check in tcf_simp_init().
  [INET]: Uninline the __inet_inherit_port call.
  [INET]: Drop the inet_inherit_port() call.
  SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked.
  [netdrvr] forcedeth: internal simplifications; changelog removal
  phylib: factor out get_phy_id from within get_phy_device
  PHY: add BCM5464 support to broadcom PHY driver
  cxgb3: Fix __must_check warning with dev_dbg.
  tc35815: Statistics cleanup
  natsemi: fix MMIO for PPC 44x platforms
  [TIPC]: Cleanup of TIPC reference table code
  [TIPC]: Optimized initialization of TIPC reference table
  [TIPC]: Remove inlining of reference table locking routines
  e1000: convert uint16_t style integers to u16
  ixgb: convert uint16_t style integers to u16
  sb1000.c: make const arrays static
  sb1000.c: stop inlining largish static functions
  ...

1 files changed, 45 insertions, 39 deletions

diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index eada69dec4f..a7745c82b4a 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -5,22 +5,25 @@ config LCS
 	tristate "Lan Channel Station Interface"
 	depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI)
 	help
-	   Select this option if you want to use LCS networking  on IBM S/390
-  	   or zSeries. This device driver supports Token Ring (IEEE 802.5),
-  	   FDDI (IEEE 802.7) and Ethernet. 
-	   This option is also available as a module which will be
-	   called lcs.ko. If you do not know what it is, it's safe to say "Y".
+	   Select this option if you want to use LCS networking on IBM System z.
+	   This device driver supports Token Ring (IEEE 802.5),
+	   FDDI (IEEE 802.7) and Ethernet.
+	   To compile as a module, choose M. The module name is lcs.ko.
+	   If you do not know what it is, it's safe to choose Y.
 
-config CTC
-	tristate "CTC device support"
+config CTCM
+	tristate "CTC and MPC SNA device support"
 	depends on CCW && NETDEVICES
 	help
-	  Select this option if you want to use channel-to-channel networking
-	  on IBM S/390 or zSeries. This device driver supports real CTC
-	  coupling using ESCON. It also supports virtual CTCs when running
-	  under VM. It will use the channel device configuration if this is
-	  available.  This option is also available as a module which will be
-	  called ctc.ko.  If you do not know what it is, it's safe to say "Y".
+	  Select this option if you want to use channel-to-channel
+	  point-to-point networking on IBM System z.
+	  This device driver supports real CTC coupling using ESCON.
+	  It also supports virtual CTCs when running under VM.
+	  This driver also supports channel-to-channel MPC SNA devices.
+	  MPC is an SNA protocol device used by Communication Server for Linux.
+	  To compile as a module, choose M. The module name is ctcm.ko.
+	  To compile into the kernel, choose Y.
+	  If you do not need any channel-to-channel connection, choose N.
 
 config NETIUCV
 	tristate "IUCV network device support (VM only)"
@@ -29,9 +32,9 @@ config NETIUCV
 	  Select this option if you want to use inter-user communication
 	  vehicle networking under VM or VIF. It enables a fast communication
 	  link between VM guests. Using ifconfig a point-to-point connection
-	  can be established to the Linux for zSeries and S7390 system
-	  running on the other VM guest. This option is also available
-	  as a module which will be called netiucv.ko. If unsure, say "Y".
+	  can be established to the Linux on IBM System z
+	  running on the other VM guest. To compile as a module, choose M.
+	  The module name is netiucv.ko. If unsure, choose Y.
 
 config SMSGIUCV
 	tristate "IUCV special message support (VM only)"
@@ -47,43 +50,46 @@ config CLAW
 	  This driver supports channel attached CLAW devices.
 	  CLAW is Common Link Access for Workstation.  Common devices
           that use CLAW are RS/6000s, Cisco Routers (CIP) and 3172 devices.
-	  To compile as a module choose M here:  The module will be called
-	  claw.ko to compile into the kernel choose Y
+	  To compile as a module, choose M. The module name is claw.ko.
+	  To compile into the kernel, choose Y.
 
 config QETH
 	tristate "Gigabit Ethernet device support"
 	depends on CCW && NETDEVICES && IP_MULTICAST && QDIO
 	help
-	  This driver supports the IBM S/390 and zSeries OSA Express adapters
+	  This driver supports the IBM System z OSA Express adapters
 	  in QDIO mode (all media types), HiperSockets interfaces and VM GuestLAN
 	  interfaces in QDIO and HIPER mode.
 	
-	  For details please refer to the documentation provided by IBM at   
-	  <http://www10.software.ibm.com/developerworks/opensource/linux390>
+	  For details please refer to the documentation provided by IBM at
+	  <http://www.ibm.com/developerworks/linux/linux390>
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called qeth.ko.
+	  To compile this driver as a module, choose M.
+	  The module name is qeth.ko.
 
+config QETH_L2
+        tristate "qeth layer 2 device support"
+        depends on QETH
+        help
+          Select this option to be able to run qeth devices in layer 2 mode.
+          To compile as a module, choose M. The module name is qeth_l2.ko.
+          If unsure, choose y.
 
-comment "Gigabit Ethernet default settings"
-	depends on QETH
+config QETH_L3
+        tristate "qeth layer 3 device support"
+        depends on QETH
+        help
+          Select this option to be able to run qeth devices in layer 3 mode.
+          To compile as a module choose M. The module name is qeth_l3.ko.
+          If unsure, choose Y.
 
 config QETH_IPV6
-	bool "IPv6 support for gigabit ethernet"
-	depends on (QETH = IPV6) || (QETH && IPV6 = 'y')
-	help
-	  If CONFIG_QETH is switched on, this option will include IPv6
-	  support in the qeth device driver.
-	
-config QETH_VLAN
-	bool "VLAN support for gigabit ethernet"
-	depends on (QETH = VLAN_8021Q) || (QETH && VLAN_8021Q = 'y')
-	help
-	  If CONFIG_QETH is switched on, this option will include IEEE
-	  802.1q VLAN support in the qeth device driver.
+        bool
+        depends on (QETH_L3 = IPV6) || (QETH_L3 && IPV6 = 'y')
+        default y
 
 config CCWGROUP
- 	tristate
-	default (LCS || CTC || QETH)
+	tristate
+	default (LCS || CTCM || QETH)
 
 endmenu