[PATCH] remove old scsi data direction macros

these have been wrappers for the generic dma direction bits since 2.5.x.
This patch converts the few remaining drivers and removes the macros.

Arjan noticed there's some hunk in here that shouldn't.  Updated patch
below:

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 10 insertions, 10 deletions

diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 031c6aaa5ca..35d6de5a4c9 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -693,12 +693,12 @@ ahc_linux_unmap_scb(struct ahc_softc *ahc, struct scb *scb)
 
 		sg = (struct scatterlist *)cmd->request_buffer;
 		pci_unmap_sg(ahc->dev_softc, sg, cmd->use_sg,
-			     scsi_to_pci_dma_dir(cmd->sc_data_direction));
+			     cmd->sc_data_direction);
 	} else if (cmd->request_bufflen != 0) {
 		pci_unmap_single(ahc->dev_softc,
 				 scb->platform_data->buf_busaddr,
 				 cmd->request_bufflen,
-				 scsi_to_pci_dma_dir(cmd->sc_data_direction));
+				 cmd->sc_data_direction);
 	}
 }
 
@@ -3007,7 +3007,7 @@ ahc_linux_dv_inq(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
 	}
 
 	ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
-	cmd->sc_data_direction = SCSI_DATA_READ;
+	cmd->sc_data_direction = DMA_FROM_DEVICE;
 	cmd->cmd_len = 6;
 	cmd->cmnd[0] = INQUIRY;
 	cmd->cmnd[4] = request_length;
@@ -3032,7 +3032,7 @@ ahc_linux_dv_tur(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
 #endif
 	/* Do a TUR to clear out any non-fatal transitional state */
 	ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
-	cmd->sc_data_direction = SCSI_DATA_NONE;
+	cmd->sc_data_direction = DMA_NONE;
 	cmd->cmd_len = 6;
 	cmd->cmnd[0] = TEST_UNIT_READY;
 }
@@ -3054,7 +3054,7 @@ ahc_linux_dv_rebd(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
 		free(targ->dv_buffer, M_DEVBUF);
 	targ->dv_buffer = malloc(AHC_REBD_LEN, M_DEVBUF, M_WAITOK);
 	ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
-	cmd->sc_data_direction = SCSI_DATA_READ;
+	cmd->sc_data_direction = DMA_FROM_DEVICE;
 	cmd->cmd_len = 10;
 	cmd->cmnd[0] = READ_BUFFER;
 	cmd->cmnd[1] = 0x0b;
@@ -3076,7 +3076,7 @@ ahc_linux_dv_web(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
 	}
 #endif
 	ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
-	cmd->sc_data_direction = SCSI_DATA_WRITE;
+	cmd->sc_data_direction = DMA_TO_DEVICE;
 	cmd->cmd_len = 10;
 	cmd->cmnd[0] = WRITE_BUFFER;
 	cmd->cmnd[1] = 0x0a;
@@ -3098,7 +3098,7 @@ ahc_linux_dv_reb(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
 	}
 #endif
 	ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
-	cmd->sc_data_direction = SCSI_DATA_READ;
+	cmd->sc_data_direction = DMA_FROM_DEVICE;
 	cmd->cmd_len = 10;
 	cmd->cmnd[0] = READ_BUFFER;
 	cmd->cmnd[1] = 0x0a;
@@ -3124,7 +3124,7 @@ ahc_linux_dv_su(struct ahc_softc *ahc, struct scsi_cmnd *cmd,
 	}
 #endif
 	ahc_linux_dv_fill_cmd(ahc, cmd, devinfo);
-	cmd->sc_data_direction = SCSI_DATA_NONE;
+	cmd->sc_data_direction = DMA_NONE;
 	cmd->cmd_len = 6;
 	cmd->cmnd[0] = START_STOP_UNIT;
 	cmd->cmnd[4] = le | SSS_START;
@@ -3659,7 +3659,7 @@ ahc_linux_run_device_queue(struct ahc_softc *ahc, struct ahc_linux_device *dev)
 
 			cur_seg = (struct scatterlist *)cmd->request_buffer;
 			nseg = pci_map_sg(ahc->dev_softc, cur_seg, cmd->use_sg,
-			    scsi_to_pci_dma_dir(cmd->sc_data_direction));
+			    cmd->sc_data_direction);
 			end_seg = cur_seg + nseg;
 			/* Copy the segments into the SG list. */
 			sg = scb->sg_list;
@@ -3703,7 +3703,7 @@ ahc_linux_run_device_queue(struct ahc_softc *ahc, struct ahc_linux_device *dev)
 			addr = pci_map_single(ahc->dev_softc,
 			       cmd->request_buffer,
 			       cmd->request_bufflen,
-			       scsi_to_pci_dma_dir(cmd->sc_data_direction));
+			       cmd->sc_data_direction);
 			scb->platform_data->buf_busaddr = addr;
 			scb->sg_count = ahc_linux_map_seg(ahc, scb,
 							  sg, addr,