Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (58 commits)
  [SCSI] zfcp: clear boxed flag on unit reopen.
  [SCSI] zfcp: clear adapter failed flag if an fsf request times out.
  [SCSI] zfcp: rework request ID management.
  [SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI
  [SCSI] zfcp: Locking for req_no and req_seq_no
  [SCSI] zfcp: print S_ID and D_ID with 3 bytes
  [SCSI] ipr: Use PCI-E reset API for new ipr adapter
  [SCSI] qla2xxx: Update version number to 8.01.07-k7.
  [SCSI] qla2xxx: Add MSI support.
  [SCSI] qla2xxx: Correct pci_set_msi() usage semantics.
  [SCSI] qla2xxx: Attempt to stop firmware only if it had been previously executed.
  [SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings.
  [SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA initialization.
  [SCSI] zfcp: Stop system after memory corruption
  [SCSI] mesh: cleanup variable usage in interrupt handler
  [SCSI] megaraid: replace yield() with cond_resched()
  [SCSI] megaraid: fix warnings when CONFIG_PROC_FS=n
  [SCSI] aacraid: correct SUN products to README
  [SCSI] aacraid: superfluous adapter reset for IBM 8 series ServeRAID controllers
  [SCSI] aacraid: kexec fix (reset interrupt handler)
  ...

4 files changed, 33 insertions, 23 deletions

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 3e296ab845b..db998d84cd4 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -130,18 +130,17 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha)
 int
 qla2100_pci_config(scsi_qla_host_t *ha)
 {
-	uint16_t w, mwi;
+	int ret;
+	uint16_t w;
 	uint32_t d;
 	unsigned long flags;
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 
 	pci_set_master(ha->pdev);
-	mwi = 0;
-	if (pci_set_mwi(ha->pdev))
-		mwi = PCI_COMMAND_INVALIDATE;
+	ret = pci_set_mwi(ha->pdev);
 
 	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
-	w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
 	pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 
 	/* Reset expansion ROM address decode enable */
@@ -166,22 +165,22 @@ qla2100_pci_config(scsi_qla_host_t *ha)
 int
 qla2300_pci_config(scsi_qla_host_t *ha)
 {
-	uint16_t	w, mwi;
+	int		ret;
+	uint16_t	w;
 	uint32_t	d;
 	unsigned long   flags = 0;
 	uint32_t	cnt;
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 
 	pci_set_master(ha->pdev);
-	mwi = 0;
-	if (pci_set_mwi(ha->pdev))
-		mwi = PCI_COMMAND_INVALIDATE;
+	ret = pci_set_mwi(ha->pdev);
 
 	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
-	w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
 
 	if (IS_QLA2322(ha) || IS_QLA6322(ha))
 		w &= ~PCI_COMMAND_INTX_DISABLE;
+	pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 
 	/*
 	 * If this is a 2300 card and not 2312, reset the
@@ -210,7 +209,7 @@ qla2300_pci_config(scsi_qla_host_t *ha)
 		ha->fb_rev = RD_FB_CMD_REG(ha, reg);
 
 		if (ha->fb_rev == FPM_2300)
-			w &= ~PCI_COMMAND_INVALIDATE;
+			pci_clear_mwi(ha->pdev);
 
 		/* Deselect FPM registers. */
 		WRT_REG_WORD(&reg->ctrl_status, 0x0);
@@ -227,7 +226,6 @@ qla2300_pci_config(scsi_qla_host_t *ha)
 
 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	}
-	pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 
 	pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
 
@@ -253,19 +251,18 @@ qla2300_pci_config(scsi_qla_host_t *ha)
 int
 qla24xx_pci_config(scsi_qla_host_t *ha)
 {
-	uint16_t w, mwi;
+	int ret;
+	uint16_t w;
 	uint32_t d;
 	unsigned long flags = 0;
 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 	int pcix_cmd_reg, pcie_dctl_reg;
 
 	pci_set_master(ha->pdev);
-	mwi = 0;
-	if (pci_set_mwi(ha->pdev))
-		mwi = PCI_COMMAND_INVALIDATE;
+	ret = pci_set_mwi(ha->pdev);
 
 	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
-	w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
 	w &= ~PCI_COMMAND_INTX_DISABLE;
 	pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 
@@ -3931,6 +3928,8 @@ qla2x00_try_to_stop_firmware(scsi_qla_host_t *ha)
 
 	if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
 		return;
+	if (!ha->fw_major_version)
+		return;
 
 	ret = qla2x00_stop_firmware(ha);
 	for (retries = 5; ret != QLA_SUCCESS && retries ; retries--) {
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d4885616cd3..ca463469063 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1726,6 +1726,17 @@ qla2x00_request_irqs(scsi_qla_host_t *ha)
 	qla_printk(KERN_WARNING, ha,
 	    "MSI-X: Falling back-to INTa mode -- %d.\n", ret);
 skip_msix:
+
+	if (!IS_QLA24XX(ha))
+		goto skip_msi;
+
+	ret = pci_enable_msi(ha->pdev);
+	if (!ret) {
+		DEBUG2(qla_printk(KERN_INFO, ha, "MSI: Enabled.\n"));
+		ha->flags.msi_enabled = 1;
+	}
+skip_msi:
+
 	ret = request_irq(ha->pdev->irq, ha->isp_ops.intr_handler,
 	    IRQF_DISABLED|IRQF_SHARED, QLA2XXX_DRIVER_NAME, ha);
 	if (!ret) {
@@ -1746,6 +1757,8 @@ qla2x00_free_irqs(scsi_qla_host_t *ha)
 
 	if (ha->flags.msix_enabled)
 		qla24xx_disable_msix(ha);
-	else if (ha->flags.inta_enabled)
+	else if (ha->flags.inta_enabled) {
 		free_irq(ha->host->irq, ha);
+		pci_disable_msi(ha->pdev);
+	}
 }
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index b78919a318e..dd076da86a4 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -36,7 +36,7 @@ module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(ql2xlogintimeout,
 		"Login timeout value in seconds.");
 
-int qlport_down_retry = 30;
+int qlport_down_retry;
 module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
 MODULE_PARM_DESC(qlport_down_retry,
 		"Maximum number of command retries to a port that returns "
@@ -1577,9 +1577,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto probe_failed;
 	}
 
-	if (qla2x00_initialize_adapter(ha) &&
-	    !(ha->device_flags & DFLG_NO_CABLE)) {
-
+	if (qla2x00_initialize_adapter(ha)) {
 		qla_printk(KERN_WARNING, ha,
 		    "Failed to initialize adapter\n");
 
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index dc85495c337..c375a4efbc7 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.01.07-k6"
+#define QLA2XXX_VERSION      "8.01.07-k7"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	1