Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (249 commits)
  powerpc: Fix pte_update for CONFIG_PTE_64BIT and !PTE_ATOMIC_UPDATES
  powerpc: Fix a build problem on ppc32 with new DMA_ATTRs
  ibm_newemac: Add MII mode support to the EMAC RGMII bridge.
  powerpc: Don't spin on sync instruction at boot time
  powerpc: Add VSX load/store alignment exception handler
  powerpc: fix giveup_vsx to save registers correctly
  powerpc: support for latencytop
  powerpc: Remove unnecessary condition when sanity-checking WIMG bits
  powerpc: Add PPC_FEATURE_PSERIES_PERFMON_COMPAT
  powerpc: Add driver for Barrier Synchronization Register
  powerpc: mman.h export fixups
  powerpc/fsl: update crypto node definition and device tree instances
  powerpc/fsl: Refactor device bindings
  powerpc/85xx: Minor fixes for 85xxds and 8536ds board.
  powerpc: Add 82xx/83xx/86xx to 6xx Multiplatform
  powerpc/85xx: publish of device for cds platforms
  powerpc/booke: don't reinitialize time base
  powerpc/86xx: Refactor pic init
  powerpc/CPM: Add i2c pins to dts and board setup
  cpm_uart: Support uart_wait_until_sent()
  ...

1 files changed, 1 insertions, 169 deletions

diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 74f1432bb24..0f0aff06c59 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -9,7 +9,7 @@
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
  *            (C) 2006 MontaVista Software, Inc.
- * 		Vitaly Bordug <vbordug@ru.mvista.com>
+ *		Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -51,7 +51,6 @@
 
 /**************************************************************/
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
 {
 	cpm_command(port->command, cmd);
@@ -68,75 +67,6 @@ void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram)
 	iounmap(pram);
 }
 
-#else
-void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
-{
-	ushort val;
-	int line = port - cpm_uart_ports;
-	volatile cpm8xx_t *cp = cpmp;
-
-	switch (line) {
-	case UART_SMC1:
-		val = mk_cr_cmd(CPM_CR_CH_SMC1, cmd) | CPM_CR_FLG;
-		break;
-	case UART_SMC2:
-		val = mk_cr_cmd(CPM_CR_CH_SMC2, cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC1:
-		val = mk_cr_cmd(CPM_CR_CH_SCC1, cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC2:
-		val = mk_cr_cmd(CPM_CR_CH_SCC2, cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC3:
-		val = mk_cr_cmd(CPM_CR_CH_SCC3, cmd) | CPM_CR_FLG;
-		break;
-	case UART_SCC4:
-		val = mk_cr_cmd(CPM_CR_CH_SCC4, cmd) | CPM_CR_FLG;
-		break;
-	default:
-		return;
-
-	}
-	cp->cp_cpcr = val;
-	while (cp->cp_cpcr & CPM_CR_FLG) ;
-}
-
-void smc1_lineif(struct uart_cpm_port *pinfo)
-{
-	pinfo->brg = 1;
-}
-
-void smc2_lineif(struct uart_cpm_port *pinfo)
-{
-	pinfo->brg = 2;
-}
-
-void scc1_lineif(struct uart_cpm_port *pinfo)
-{
-	/* XXX SCC1: insert port configuration here */
-	pinfo->brg = 1;
-}
-
-void scc2_lineif(struct uart_cpm_port *pinfo)
-{
-	/* XXX SCC2: insert port configuration here */
-	pinfo->brg = 2;
-}
-
-void scc3_lineif(struct uart_cpm_port *pinfo)
-{
-	/* XXX SCC3: insert port configuration here */
-	pinfo->brg = 3;
-}
-
-void scc4_lineif(struct uart_cpm_port *pinfo)
-{
-	/* XXX SCC4: insert port configuration here */
-	pinfo->brg = 4;
-}
-#endif
-
 /*
  * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
  * receive buffer descriptors from dual port ram, and a character
@@ -205,101 +135,3 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 
 	cpm_dpfree(pinfo->dp_addr);
 }
-
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/* Setup any dynamic params in the uart desc */
-int cpm_uart_init_portdesc(void)
-{
-	pr_debug("CPM uart[-]:init portdesc\n");
-
-	cpm_uart_nr = 0;
-#ifdef CONFIG_SERIAL_CPM_SMC1
-	cpm_uart_ports[UART_SMC1].smcp = &cpmp->cp_smc[0];
-/*
- *  Is SMC1 being relocated?
- */
-# ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
-	cpm_uart_ports[UART_SMC1].smcup =
-	    (smc_uart_t *) & cpmp->cp_dparam[0x3C0];
-# else
-	cpm_uart_ports[UART_SMC1].smcup =
-	    (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC1];
-# endif
-	cpm_uart_ports[UART_SMC1].port.mapbase =
-	    (unsigned long)&cpmp->cp_smc[0];
-	cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
-	cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC2
-	cpm_uart_ports[UART_SMC2].smcp = &cpmp->cp_smc[1];
-	cpm_uart_ports[UART_SMC2].smcup =
-	    (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC2];
-	cpm_uart_ports[UART_SMC2].port.mapbase =
-	    (unsigned long)&cpmp->cp_smc[1];
-	cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
-	cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC1
-	cpm_uart_ports[UART_SCC1].sccp = &cpmp->cp_scc[0];
-	cpm_uart_ports[UART_SCC1].sccup =
-	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC1];
-	cpm_uart_ports[UART_SCC1].port.mapbase =
-	    (unsigned long)&cpmp->cp_scc[0];
-	cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC2
-	cpm_uart_ports[UART_SCC2].sccp = &cpmp->cp_scc[1];
-	cpm_uart_ports[UART_SCC2].sccup =
-	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC2];
-	cpm_uart_ports[UART_SCC2].port.mapbase =
-	    (unsigned long)&cpmp->cp_scc[1];
-	cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC3
-	cpm_uart_ports[UART_SCC3].sccp = &cpmp->cp_scc[2];
-	cpm_uart_ports[UART_SCC3].sccup =
-	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC3];
-	cpm_uart_ports[UART_SCC3].port.mapbase =
-	    (unsigned long)&cpmp->cp_scc[2];
-	cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SCC4
-	cpm_uart_ports[UART_SCC4].sccp = &cpmp->cp_scc[3];
-	cpm_uart_ports[UART_SCC4].sccup =
-	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC4];
-	cpm_uart_ports[UART_SCC4].port.mapbase =
-	    (unsigned long)&cpmp->cp_scc[3];
-	cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
-	    ~(UART_SCCM_TX | UART_SCCM_RX);
-	cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
-	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock();
-	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
-#endif
-	return 0;
-}
-#endif