Automatic merge of /spare/repo/netdev-2.6 branch master

14 files changed, 108 insertions, 155 deletions

diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 33fbda79f35..0b10169961e 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -126,18 +126,8 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id, struct pt_regs *r
 				flag = TTY_FRAME;
 		}
 
-		if ((rxs & port->ignore_status_mask) == 0) {
-			tty_insert_flip_char(tty, ch, flag);
-		}
-		if ((rxs & RXSTAT_OVERRUN) &&
-		    tty->flip.count < TTY_FLIPBUF_SIZE) {
-			/*
-			 * Overrun is special, since it's reported
-			 * immediately, and doesn't affect the current
-			 * character.
-			 */
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		}
+		uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag);
+
 		status = *CSR_UARTFLG;
 	}
 	tty_flip_buffer_push(tty);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 0d9358608fd..30e8beb7143 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -682,8 +682,6 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 	 * from EXCR1. Switch back to bank 0, change it in MCR. Then
 	 * switch back to bank 2, read it from EXCR1 again and check
 	 * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
-	 * On PowerPC we don't want to change baud_base, as we have
-	 * a number of different divisors.  -- Tom Rini
 	 */
 	serial_outp(up, UART_LCR, 0);
 	status1 = serial_in(up, UART_MCR);
@@ -699,16 +697,25 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 		serial_outp(up, UART_MCR, status1);
 
 		if ((status2 ^ status1) & UART_MCR_LOOP) {
-#ifndef CONFIG_PPC
+			unsigned short quot;
+
 			serial_outp(up, UART_LCR, 0xE0);
+
+			quot = serial_inp(up, UART_DLM) << 8;
+			quot += serial_inp(up, UART_DLL);
+			quot <<= 3;
+
 			status1 = serial_in(up, 0x04); /* EXCR1 */
 			status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
 			status1 |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
 			serial_outp(up, 0x04, status1);
+			
+			serial_outp(up, UART_DLL, quot & 0xff);
+			serial_outp(up, UART_DLM, quot >> 8);
+
 			serial_outp(up, UART_LCR, 0);
-			up->port.uartclk = 921600*16;
-#endif
 
+			up->port.uartclk = 921600*16;
 			up->port.type = PORT_NS16550A;
 			up->capabilities |= UART_NATSEMI;
 			return;
@@ -1122,18 +1129,9 @@ receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs)
 		}
 		if (uart_handle_sysrq_char(&up->port, ch, regs))
 			goto ignore_char;
-		if ((lsr & up->port.ignore_status_mask) == 0) {
-			tty_insert_flip_char(tty, ch, flag);
-		}
-		if ((lsr & UART_LSR_OE) &&
-		    tty->flip.count < TTY_FLIPBUF_SIZE) {
-			/*
-			 * Overrun is special, since it's reported
-			 * immediately, and doesn't affect the current
-			 * character.
-			 */
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		}
+
+		uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
+
 	ignore_char:
 		lsr = serial_inp(up, UART_LSR);
 	} while ((lsr & UART_LSR_DR) && (max_count-- > 0));
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index f2a5e2933c4..2884b310e54 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -198,18 +198,8 @@ pl010_rx_chars(struct uart_port *port)
 		if (uart_handle_sysrq_char(port, ch, regs))
 			goto ignore_char;
 
-		if ((rsr & port->ignore_status_mask) == 0) {
-			tty_insert_flip_char(tty, ch, flag);
-		}
-		if ((rsr & UART01x_RSR_OE) &&
-		    tty->flip.count < TTY_FLIPBUF_SIZE) {
-			/*
-			 * Overrun is special, since it's reported
-			 * immediately, and doesn't affect the current
-			 * character
-			 */
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		}
+		uart_insert_char(port, rsr, UART01x_RSR_OE, ch, flag);
+
 	ignore_char:
 		status = UART_GET_FR(port);
 	}
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index d5cbef3fe8b..7db88ee18f7 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -163,18 +163,8 @@ pl011_rx_chars(struct uart_amba_port *uap)
 		if (uart_handle_sysrq_char(&uap->port, ch, regs))
 			goto ignore_char;
 
-		if ((rsr & uap->port.ignore_status_mask) == 0) {
-			tty_insert_flip_char(tty, ch, flag);
-		}
-		if ((rsr & UART01x_RSR_OE) &&
-		    tty->flip.count < TTY_FLIPBUF_SIZE) {
-			/*
-			 * Overrun is special, since it's reported
-			 * immediately, and doesn't affect the current
-			 * character
-			 */
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		}
+		uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
+
 	ignore_char:
 		status = readw(uap->port.membase + UART01x_FR);
 	}
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 6242f3090a9..e92522b33c4 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -143,10 +143,7 @@ static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *re
 		 * CHECK: does overrun affect the current character?
 		 * ASSUMPTION: it does not.
 		 */
-		if ((ch & port->ignore_status_mask & ~RXSTAT_OVERRUN) == 0)
-			tty_insert_flip_char(tty, ch, flg);
-		if ((ch & ~port->ignore_status_mask & RXSTAT_OVERRUN) == 0)
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		uart_insert_char(port, ch, UARTDR_OVERR, ch, flg);
 
 	ignore_char:
 		status = clps_readl(SYSFLG(port));
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 51d8a49f447..9dc151d8fa6 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -161,20 +161,12 @@ receive_chars(struct uart_pxa_port *up, int *status, struct pt_regs *regs)
 			else if (*status & UART_LSR_FE)
 				flag = TTY_FRAME;
 		}
+
 		if (uart_handle_sysrq_char(&up->port, ch, regs))
 			goto ignore_char;
-		if ((*status & up->port.ignore_status_mask) == 0) {
-			tty_insert_flip_char(tty, ch, flag);
-		}
-		if ((*status & UART_LSR_OE) &&
-		    tty->flip.count < TTY_FLIPBUF_SIZE) {
-			/*
-			 * Overrun is special, since it's reported
-			 * immediately, and doesn't affect the current
-			 * character.
-			 */
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		}
+
+		uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
+
 	ignore_char:
 		*status = serial_in(up, UART_LSR);
 	} while ((*status & UART_LSR_DR) && (max_count-- > 0));
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 435750d40a4..2a9f7ade2c9 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -394,20 +394,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id, struct pt_regs *regs)
 		if (uart_handle_sysrq_char(port, ch, regs))
 			goto ignore_char;
 
-		if ((uerstat & port->ignore_status_mask) == 0) {
-			tty_insert_flip_char(tty, ch, flag);
-		}
-
-		if ((uerstat & S3C2410_UERSTAT_OVERRUN) &&
-		    tty->flip.count < TTY_FLIPBUF_SIZE) {
-			/*
-			 * Overrun is special, since it's reported
-			 * immediately, and doesn't affect the current
-			 * character.
-			 */
-
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		}
+		uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, ch, flag);
 
 	ignore_char:
 		continue;
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 157218bc6c6..22565a67a57 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -237,10 +237,7 @@ sa1100_rx_chars(struct sa1100_port *sport, struct pt_regs *regs)
 		if (uart_handle_sysrq_char(&sport->port, ch, regs))
 			goto ignore_char;
 
-		if ((status & port->ignore_status_mask & ~UTSR1_TO_SM(UTSR1_ROR)) == 0)
-			tty_insert_flip_char(tty, ch, flg);
-		if (status & ~port->ignore_status_mask & UTSR1_TO_SM(UTSR1_ROR))
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		uart_insert_char(&sport->port, status, UTSR1_TO_SM(UTSR1_ROR), ch, flg);
 
 	ignore_char:
 		status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 6eeb48f6a48..0d7b65f93e8 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -661,10 +661,10 @@ void serial_config(dev_link_t * link)
 	/* Is this a multiport card? */
 	tuple->DesiredTuple = CISTPL_MANFID;
 	if (first_tuple(handle, tuple, parse) == CS_SUCCESS) {
-		info->manfid = le16_to_cpu(buf[0]);
+		info->manfid = parse->manfid.manf;
 		for (i = 0; i < MULTI_COUNT; i++)
 			if ((info->manfid == multi_id[i].manfid) &&
-			    (le16_to_cpu(buf[1]) == multi_id[i].prodid))
+			    (parse->manfid.card == multi_id[i].prodid))
 				break;
 		if (i < MULTI_COUNT)
 			info->multi = multi_id[i].multi;
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index 85cfa08d3ba..56f269b6bfb 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -190,18 +190,7 @@ lh7a40xuart_rx_chars (struct uart_port* port)
 		if (uart_handle_sysrq_char (port, (unsigned char) data, regs))
 			continue;
 
-		if ((data & port->ignore_status_mask) == 0) {
-			tty_insert_flip_char(tty, data, flag);
-		}
-		if ((data & RxOverrunError)
-		    && tty->flip.count < TTY_FLIPBUF_SIZE) {
-			/*
-			 * Overrun is special, since it's reported
-			 * immediately, and doesn't affect the current
-			 * character
-			 */
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		}
+		uart_insert_char(port, data, RxOverrunError, data, flag);
 	}
 	tty_flip_buffer_push (tty);
 	return;
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 37b2ef297cb..3f1051a4a13 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -350,18 +350,9 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status, struct pt_regs *r
 		}
 		if (uart_handle_sysrq_char(&up->port, ch, regs))
 			goto ignore_char;
-		if ((disr & up->port.ignore_status_mask) == 0) {
-			tty_insert_flip_char(tty, ch, flag);
-		}
-		if ((disr & TXX9_SIDISR_UOER) &&
-		    tty->flip.count < TTY_FLIPBUF_SIZE) {
-			/*
-			 * Overrun is special, since it's reported
-			 * immediately, and doesn't affect the current
-			 * character.
-			 */
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		}
+
+		uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag);
+
 	ignore_char:
 		disr = sio_in(up, TXX9_SIDISR);
 	} while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0));
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 39b788d95e3..10e2990a40d 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -61,6 +61,16 @@ struct uart_sunsab_port {
 	unsigned char			pvr_dtr_bit;	/* Which PVR bit is DTR */
 	unsigned char			pvr_dsr_bit;	/* Which PVR bit is DSR */
 	int				type;		/* SAB82532 version	*/
+
+	/* Setting configuration bits while the transmitter is active
+	 * can cause garbage characters to get emitted by the chip.
+	 * Therefore, we cache such writes here and do the real register
+	 * write the next time the transmitter becomes idle.
+	 */
+	unsigned int			cached_ebrg;
+	unsigned char			cached_mode;
+	unsigned char			cached_pvr;
+	unsigned char			cached_dafo;
 };
 
 /*
@@ -236,6 +246,7 @@ receive_chars(struct uart_sunsab_port *up,
 }
 
 static void sunsab_stop_tx(struct uart_port *, unsigned int);
+static void sunsab_tx_idle(struct uart_sunsab_port *);
 
 static void transmit_chars(struct uart_sunsab_port *up,
 			   union sab82532_irq_status *stat)
@@ -258,6 +269,7 @@ static void transmit_chars(struct uart_sunsab_port *up,
 		return;
 
 	set_bit(SAB82532_XPR, &up->irqflags);
+	sunsab_tx_idle(up);
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
 		up->interrupt_mask1 |= SAB82532_IMR1_XPR;
@@ -397,21 +409,21 @@ static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 
 	if (mctrl & TIOCM_RTS) {
-		writeb(readb(&up->regs->rw.mode) & ~SAB82532_MODE_FRTS,
-		       &up->regs->rw.mode);
-		writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
-		       &up->regs->rw.mode);
+		up->cached_mode &= ~SAB82532_MODE_FRTS;
+		up->cached_mode |= SAB82532_MODE_RTS;
 	} else {
-		writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_FRTS,
-		       &up->regs->rw.mode);
-		writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
-		       &up->regs->rw.mode);
+		up->cached_mode |= (SAB82532_MODE_FRTS |
+				    SAB82532_MODE_RTS);
 	}
 	if (mctrl & TIOCM_DTR) {
-		writeb(readb(&up->regs->rw.pvr) & ~(up->pvr_dtr_bit), &up->regs->rw.pvr);
+		up->cached_pvr &= ~(up->pvr_dtr_bit);
 	} else {
-		writeb(readb(&up->regs->rw.pvr) | up->pvr_dtr_bit, &up->regs->rw.pvr);
+		up->cached_pvr |= up->pvr_dtr_bit;
 	}
+
+	set_bit(SAB82532_REGS_PENDING, &up->irqflags);
+	if (test_bit(SAB82532_XPR, &up->irqflags))
+		sunsab_tx_idle(up);
 }
 
 /* port->lock is not held.  */
@@ -450,6 +462,25 @@ static void sunsab_stop_tx(struct uart_port *port, unsigned int tty_stop)
 }
 
 /* port->lock held by caller.  */
+static void sunsab_tx_idle(struct uart_sunsab_port *up)
+{
+	if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) {
+		u8 tmp;
+
+		clear_bit(SAB82532_REGS_PENDING, &up->irqflags);
+		writeb(up->cached_mode, &up->regs->rw.mode);
+		writeb(up->cached_pvr, &up->regs->rw.pvr);
+		writeb(up->cached_dafo, &up->regs->w.dafo);
+
+		writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr);
+		tmp = readb(&up->regs->rw.ccr2);
+		tmp &= ~0xc0;
+		tmp |= (up->cached_ebrg >> 2) & 0xc0;
+		writeb(tmp, &up->regs->rw.ccr2);
+	}
+}
+
+/* port->lock held by caller.  */
 static void sunsab_start_tx(struct uart_port *port, unsigned int tty_start)
 {
 	struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
@@ -517,12 +548,16 @@ static void sunsab_break_ctl(struct uart_port *port, int break_state)
 
 	spin_lock_irqsave(&up->port.lock, flags);
 
-	val = readb(&up->regs->rw.dafo);
+	val = up->cached_dafo;
 	if (break_state)
 		val |= SAB82532_DAFO_XBRK;
 	else
 		val &= ~SAB82532_DAFO_XBRK;
-	writeb(val, &up->regs->rw.dafo);
+	up->cached_dafo = val;
+
+	set_bit(SAB82532_REGS_PENDING, &up->irqflags);
+	if (test_bit(SAB82532_XPR, &up->irqflags))
+		sunsab_tx_idle(up);
 
 	spin_unlock_irqrestore(&up->port.lock, flags);
 }
@@ -566,8 +601,9 @@ static int sunsab_startup(struct uart_port *port)
 	       SAB82532_CCR2_TOE, &up->regs->w.ccr2);
 	writeb(0, &up->regs->w.ccr3);
 	writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4);
-	writeb(SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
-	       SAB82532_MODE_RAC, &up->regs->w.mode);
+	up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
+			   SAB82532_MODE_RAC);
+	writeb(up->cached_mode, &up->regs->w.mode);
 	writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
 	
 	tmp = readb(&up->regs->rw.ccr0);
@@ -598,7 +634,6 @@ static void sunsab_shutdown(struct uart_port *port)
 {
 	struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
 	unsigned long flags;
-	unsigned char tmp;
 
 	spin_lock_irqsave(&up->port.lock, flags);
 
@@ -609,14 +644,13 @@ static void sunsab_shutdown(struct uart_port *port)
 	writeb(up->interrupt_mask1, &up->regs->w.imr1);
 
 	/* Disable break condition */
-	tmp = readb(&up->regs->rw.dafo);
-	tmp &= ~SAB82532_DAFO_XBRK;
-	writeb(tmp, &up->regs->rw.dafo);
+	up->cached_dafo = readb(&up->regs->rw.dafo);
+	up->cached_dafo &= ~SAB82532_DAFO_XBRK;
+	writeb(up->cached_dafo, &up->regs->rw.dafo);
 
 	/* Disable Receiver */	
-	tmp = readb(&up->regs->rw.mode);
-	tmp &= ~SAB82532_MODE_RAC;
-	writeb(tmp, &up->regs->rw.mode);
+	up->cached_mode &= ~SAB82532_MODE_RAC;
+	writeb(up->cached_mode, &up->regs->rw.mode);
 
 	/*
 	 * XXX FIXME
@@ -685,7 +719,6 @@ static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cfla
 				  unsigned int iflag, unsigned int baud,
 				  unsigned int quot)
 {
-	unsigned int ebrg;
 	unsigned char dafo;
 	int bits, n, m;
 
@@ -714,10 +747,11 @@ static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cfla
 	} else {
 		dafo |= SAB82532_DAFO_PAR_EVEN;
 	}
+	up->cached_dafo = dafo;
 
 	calc_ebrg(baud, &n, &m);
 
-	ebrg = n | (m << 6);
+	up->cached_ebrg = n | (m << 6);
 
 	up->tec_timeout = (10 * 1000000) / baud;
 	up->cec_timeout = up->tec_timeout >> 2;
@@ -770,16 +804,13 @@ static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cfla
 	uart_update_timeout(&up->port, cflag,
 			    (up->port.uartclk / (16 * quot)));
 
-	/* Now bang the new settings into the chip.  */
-	sunsab_cec_wait(up);
-	sunsab_tec_wait(up);
-	writeb(dafo, &up->regs->w.dafo);
-	writeb(ebrg & 0xff, &up->regs->w.bgr);
-	writeb((readb(&up->regs->rw.ccr2) & ~0xc0) | ((ebrg >> 2) & 0xc0),
-	       &up->regs->rw.ccr2);
-
-	writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RAC, &up->regs->rw.mode);
-
+	/* Now schedule a register update when the chip's
+	 * transmitter is idle.
+	 */
+	up->cached_mode |= SAB82532_MODE_RAC;
+	set_bit(SAB82532_REGS_PENDING, &up->irqflags);
+	if (test_bit(SAB82532_XPR, &up->irqflags))
+		sunsab_tx_idle(up);
 }
 
 /* port->lock is not held.  */
@@ -1084,11 +1115,13 @@ static void __init sunsab_init_hw(void)
 			up->pvr_dsr_bit = (1 << 3);
 			up->pvr_dtr_bit = (1 << 2);
 		}
-		writeb((1 << 1) | (1 << 2) | (1 << 4), &up->regs->w.pvr);
-		writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_FRTS,
-		       &up->regs->rw.mode);
-		writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
-		       &up->regs->rw.mode);
+		up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4);
+		writeb(up->cached_pvr, &up->regs->w.pvr);
+		up->cached_mode = readb(&up->regs->rw.mode);
+		up->cached_mode |= SAB82532_MODE_FRTS;
+		writeb(up->cached_mode, &up->regs->rw.mode);
+		up->cached_mode |= SAB82532_MODE_RTS;
+		writeb(up->cached_mode, &up->regs->rw.mode);
 
 		up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT;
 		up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT;
diff --git a/drivers/serial/sunsab.h b/drivers/serial/sunsab.h
index 686086fcbbf..b78e1f7b805 100644
--- a/drivers/serial/sunsab.h
+++ b/drivers/serial/sunsab.h
@@ -126,6 +126,7 @@ union sab82532_irq_status {
 /* irqflags bits */
 #define SAB82532_ALLS			0x00000001
 #define SAB82532_XPR			0x00000002
+#define SAB82532_REGS_PENDING		0x00000004
 
 /* RFIFO Status Byte */
 #define SAB82532_RSTAT_PE		0x80
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 307886199f2..5d2ceb623e6 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -412,10 +412,8 @@ static inline void receive_chars(struct uart_port *port, uint8_t *status,
 
 		if (uart_handle_sysrq_char(port, ch, regs))
 			goto ignore_char;
-		if ((lsr & port->ignore_status_mask) == 0)
-			tty_insert_flip_char(tty, ch, flag);
-		if ((lsr & UART_LSR_OE) && (tty->flip.count < TTY_FLIPBUF_SIZE))
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+		uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
 
 	ignore_char:
 		lsr = siu_read(port, UART_LSR);