aboutsummaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
authorRussell King <rmk+kernel@arm.linux.org.uk>2009-09-24 21:22:33 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2009-09-24 21:22:33 +0100
commitbaea7b946f00a291b166ccae7fcfed6c01530cc6 (patch)
tree4aa275fbdbec9c7b9b4629e8bee2bbecd3c6a6af /drivers/spi
parentae19ffbadc1b2100285a5b5b3d0a4e0a11390904 (diff)
parent94e0fb086fc5663c38bbc0fe86d698be8314f82f (diff)
Merge branch 'origin' into for-linus
Conflicts: MAINTAINERS
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/Kconfig23
-rw-r--r--drivers/spi/Makefile4
-rw-r--r--drivers/spi/mxc_spi.c685
-rw-r--r--drivers/spi/omap2_mcspi.c210
-rw-r--r--drivers/spi/omap_uwire.c2
-rw-r--r--drivers/spi/pxa2xx_spi.c2
-rw-r--r--drivers/spi/spi.c85
-rw-r--r--drivers/spi/spi_imx.c1770
-rw-r--r--drivers/spi/spi_ppc4xx.c612
-rw-r--r--drivers/spi/spi_s3c24xx.c159
-rw-r--r--drivers/spi/spi_stmp.c679
-rw-r--r--drivers/spi/spidev.c1
-rw-r--r--drivers/spi/tle62x0.c1
13 files changed, 2340 insertions, 1893 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2c733c27db2..4b6f7cba3b3 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -117,10 +117,11 @@ config SPI_GPIO
speed with a custom version of this driver; see the source code.
config SPI_IMX
- tristate "Freescale iMX SPI controller"
- depends on ARCH_MX1 && EXPERIMENTAL
+ tristate "Freescale i.MX SPI controllers"
+ depends on ARCH_MXC
+ select SPI_BITBANG
help
- This enables using the Freescale iMX SPI controller in master
+ This enables using the Freescale i.MX SPI controllers in master
mode.
config SPI_LM70_LLP
@@ -173,11 +174,21 @@ config SPI_PL022
tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)"
depends on ARM_AMBA && EXPERIMENTAL
default y if MACH_U300
+ default y if ARCH_REALVIEW
+ default y if INTEGRATOR_IMPD1
+ default y if ARCH_VERSATILE
help
This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
controller. If you have an embedded system with an AMBA(R)
bus and a PL022 controller, say Y or M here.
+config SPI_PPC4xx
+ tristate "PPC4xx SPI Controller"
+ depends on PPC32 && 4xx && SPI_MASTER
+ select SPI_BITBANG
+ help
+ This selects a driver for the PPC4xx SPI Controller.
+
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
depends on ARCH_PXA && EXPERIMENTAL
@@ -211,6 +222,12 @@ config SPI_SH_SCI
help
SPI driver for SuperH SCI blocks.
+config SPI_STMP3XXX
+ tristate "Freescale STMP37xx/378x SPI/SSP controller"
+ depends on ARCH_STMP3XXX && SPI_MASTER
+ help
+ SPI driver for Freescale STMP37xx/378x SoC SSP interface
+
config SPI_TXX9
tristate "Toshiba TXx9 SPI controller"
depends on GENERIC_GPIO && CPU_TX49XX
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 3de408d294b..6d7a3f82c54 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -17,7 +17,7 @@ obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
obj-$(CONFIG_SPI_AU1550) += au1550_spi.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
-obj-$(CONFIG_SPI_IMX) += spi_imx.o
+obj-$(CONFIG_SPI_IMX) += mxc_spi.o
obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
@@ -26,11 +26,13 @@ obj-$(CONFIG_SPI_ORION) += orion_spi.o
obj-$(CONFIG_SPI_PL022) += amba-pl022.o
obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o
+obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o
obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
+obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
# ... add above this line ...
# SPI protocol drivers (device/link on bus)
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
new file mode 100644
index 00000000000..b1447236ae8
--- /dev/null
+++ b/drivers/spi/mxc_spi.c
@@ -0,0 +1,685 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation
+ * 51 Franklin Street, Fifth Floor
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/types.h>
+
+#include <mach/spi.h>
+
+#define DRIVER_NAME "spi_imx"
+
+#define MXC_CSPIRXDATA 0x00
+#define MXC_CSPITXDATA 0x04
+#define MXC_CSPICTRL 0x08
+#define MXC_CSPIINT 0x0c
+#define MXC_RESET 0x1c
+
+/* generic defines to abstract from the different register layouts */
+#define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */
+#define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */
+
+struct mxc_spi_config {
+ unsigned int speed_hz;
+ unsigned int bpw;
+ unsigned int mode;
+ int cs;
+};
+
+struct mxc_spi_data {
+ struct spi_bitbang bitbang;
+
+ struct completion xfer_done;
+ void *base;
+ int irq;
+ struct clk *clk;
+ unsigned long spi_clk;
+ int *chipselect;
+
+ unsigned int count;
+ void (*tx)(struct mxc_spi_data *);
+ void (*rx)(struct mxc_spi_data *);
+ void *rx_buf;
+ const void *tx_buf;
+ unsigned int txfifo; /* number of words pushed in tx FIFO */
+
+ /* SoC specific functions */
+ void (*intctrl)(struct mxc_spi_data *, int);
+ int (*config)(struct mxc_spi_data *, struct mxc_spi_config *);
+ void (*trigger)(struct mxc_spi_data *);
+ int (*rx_available)(struct mxc_spi_data *);
+};
+
+#define MXC_SPI_BUF_RX(type) \
+static void mxc_spi_buf_rx_##type(struct mxc_spi_data *mxc_spi) \
+{ \
+ unsigned int val = readl(mxc_spi->base + MXC_CSPIRXDATA); \
+ \
+ if (mxc_spi->rx_buf) { \
+ *(type *)mxc_spi->rx_buf = val; \
+ mxc_spi->rx_buf += sizeof(type); \
+ } \
+}
+
+#define MXC_SPI_BUF_TX(type) \
+static void mxc_spi_buf_tx_##type(struct mxc_spi_data *mxc_spi) \
+{ \
+ type val = 0; \
+ \
+ if (mxc_spi->tx_buf) { \
+ val = *(type *)mxc_spi->tx_buf; \
+ mxc_spi->tx_buf += sizeof(type); \
+ } \
+ \
+ mxc_spi->count -= sizeof(type); \
+ \
+ writel(val, mxc_spi->base + MXC_CSPITXDATA); \
+}
+
+MXC_SPI_BUF_RX(u8)
+MXC_SPI_BUF_TX(u8)
+MXC_SPI_BUF_RX(u16)
+MXC_SPI_BUF_TX(u16)
+MXC_SPI_BUF_RX(u32)
+MXC_SPI_BUF_TX(u32)
+
+/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
+ * (which is currently not the case in this driver)
+ */
+static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
+ 256, 384, 512, 768, 1024};
+
+/* MX21, MX27 */
+static unsigned int mxc_spi_clkdiv_1(unsigned int fin,
+ unsigned int fspi)
+{
+ int i, max;
+
+ if (cpu_is_mx21())
+ max = 18;
+ else
+ max = 16;
+
+ for (i = 2; i < max; i++)
+ if (fspi * mxc_clkdivs[i] >= fin)
+ return i;
+
+ return max;
+}
+
+/* MX1, MX31, MX35 */
+static unsigned int mxc_spi_clkdiv_2(unsigned int fin,
+ unsigned int fspi)
+{
+ int i, div = 4;
+
+ for (i = 0; i < 7; i++) {
+ if (fspi * div >= fin)
+ return i;
+ div <<= 1;
+ }
+
+ return 7;
+}
+
+#define MX31_INTREG_TEEN (1 << 0)
+#define MX31_INTREG_RREN (1 << 3)
+
+#define MX31_CSPICTRL_ENABLE (1 << 0)
+#define MX31_CSPICTRL_MASTER (1 << 1)
+#define MX31_CSPICTRL_XCH (1 << 2)
+#define MX31_CSPICTRL_POL (1 << 4)
+#define MX31_CSPICTRL_PHA (1 << 5)
+#define MX31_CSPICTRL_SSCTL (1 << 6)
+#define MX31_CSPICTRL_SSPOL (1 << 7)
+#define MX31_CSPICTRL_BC_SHIFT 8
+#define MX35_CSPICTRL_BL_SHIFT 20
+#define MX31_CSPICTRL_CS_SHIFT 24
+#define MX35_CSPICTRL_CS_SHIFT 12
+#define MX31_CSPICTRL_DR_SHIFT 16
+
+#define MX31_CSPISTATUS 0x14
+#define MX31_STATUS_RR (1 << 3)
+
+/* These functions also work for the i.MX35, but be aware that
+ * the i.MX35 has a slightly different register layout for bits
+ * we do not use here.
+ */
+static void mx31_intctrl(struct mxc_spi_data *mxc_spi, int enable)
+{
+ unsigned int val = 0;
+
+ if (enable & MXC_INT_TE)
+ val |= MX31_INTREG_TEEN;
+ if (enable & MXC_INT_RR)
+ val |= MX31_INTREG_RREN;
+
+ writel(val, mxc_spi->base + MXC_CSPIINT);
+}
+
+static void mx31_trigger(struct mxc_spi_data *mxc_spi)
+{
+ unsigned int reg;
+
+ reg = readl(mxc_spi->base + MXC_CSPICTRL);
+ reg |= MX31_CSPICTRL_XCH;
+ writel(reg, mxc_spi->base + MXC_CSPICTRL);
+}
+
+static int mx31_config(struct mxc_spi_data *mxc_spi,
+ struct mxc_spi_config *config)
+{
+ unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
+
+ reg |= mxc_spi_clkdiv_2(mxc_spi->spi_clk, config->speed_hz) <<
+ MX31_CSPICTRL_DR_SHIFT;
+
+ if (cpu_is_mx31())
+ reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
+ else if (cpu_is_mx35()) {
+ reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
+ reg |= MX31_CSPICTRL_SSCTL;
+ }
+
+ if (config->mode & SPI_CPHA)
+ reg |= MX31_CSPICTRL_PHA;
+ if (config->mode & SPI_CPOL)
+ reg |= MX31_CSPICTRL_POL;
+ if (config->mode & SPI_CS_HIGH)
+ reg |= MX31_CSPICTRL_SSPOL;
+ if (config->cs < 0) {
+ if (cpu_is_mx31())
+ reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT;
+ else if (cpu_is_mx35())
+ reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT;
+ }
+
+ writel(reg, mxc_spi->base + MXC_CSPICTRL);
+
+ return 0;
+}
+
+static int mx31_rx_available(struct mxc_spi_data *mxc_spi)
+{
+ return readl(mxc_spi->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
+}
+
+#define MX27_INTREG_RR (1 << 4)
+#define MX27_INTREG_TEEN (1 << 9)
+#define MX27_INTREG_RREN (1 << 13)
+
+#define MX27_CSPICTRL_POL (1 << 5)
+#define MX27_CSPICTRL_PHA (1 << 6)
+#define MX27_CSPICTRL_SSPOL (1 << 8)
+#define MX27_CSPICTRL_XCH (1 << 9)
+#define MX27_CSPICTRL_ENABLE (1 << 10)
+#define MX27_CSPICTRL_MASTER (1 << 11)
+#define MX27_CSPICTRL_DR_SHIFT 14
+#define MX27_CSPICTRL_CS_SHIFT 19
+
+static void mx27_intctrl(struct mxc_spi_data *mxc_spi, int enable)
+{
+ unsigned int val = 0;
+
+ if (enable & MXC_INT_TE)
+ val |= MX27_INTREG_TEEN;
+ if (enable & MXC_INT_RR)
+ val |= MX27_INTREG_RREN;
+
+ writel(val, mxc_spi->base + MXC_CSPIINT);
+}
+
+static void mx27_trigger(struct mxc_spi_data *mxc_spi)
+{
+ unsigned int reg;
+
+ reg = readl(mxc_spi->base + MXC_CSPICTRL);
+ reg |= MX27_CSPICTRL_XCH;
+ writel(reg, mxc_spi->base + MXC_CSPICTRL);
+}
+
+static int mx27_config(struct mxc_spi_data *mxc_spi,
+ struct mxc_spi_config *config)
+{
+ unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER;
+
+ reg |= mxc_spi_clkdiv_1(mxc_spi->spi_clk, config->speed_hz) <<
+ MX27_CSPICTRL_DR_SHIFT;
+ reg |= config->bpw - 1;
+
+ if (config->mode & SPI_CPHA)
+ reg |= MX27_CSPICTRL_PHA;
+ if (config->mode & SPI_CPOL)
+ reg |= MX27_CSPICTRL_POL;
+ if (config->mode & SPI_CS_HIGH)
+ reg |= MX27_CSPICTRL_SSPOL;
+ if (config->cs < 0)
+ reg |= (config->cs + 32) << MX27_CSPICTRL_CS_SHIFT;
+
+ writel(reg, mxc_spi->base + MXC_CSPICTRL);
+
+ return 0;
+}
+
+static int mx27_rx_available(struct mxc_spi_data *mxc_spi)
+{
+ return readl(mxc_spi->base + MXC_CSPIINT) & MX27_INTREG_RR;
+}
+
+#define MX1_INTREG_RR (1 << 3)
+#define MX1_INTREG_TEEN (1 << 8)
+#define MX1_INTREG_RREN (1 << 11)
+
+#define MX1_CSPICTRL_POL (1 << 4)
+#define MX1_CSPICTRL_PHA (1 << 5)
+#define MX1_CSPICTRL_XCH (1 << 8)
+#define MX1_CSPICTRL_ENABLE (1 << 9)
+#define MX1_CSPICTRL_MASTER (1 << 10)
+#define MX1_CSPICTRL_DR_SHIFT 13
+
+static void mx1_intctrl(struct mxc_spi_data *mxc_spi, int enable)
+{
+ unsigned int val = 0;
+
+ if (enable & MXC_INT_TE)
+ val |= MX1_INTREG_TEEN;
+ if (enable & MXC_INT_RR)
+ val |= MX1_INTREG_RREN;
+
+ writel(val, mxc_spi->base + MXC_CSPIINT);
+}
+
+static void mx1_trigger(struct mxc_spi_data *mxc_spi)
+{
+ unsigned int reg;
+
+ reg = readl(mxc_spi->base + MXC_CSPICTRL);
+ reg |= MX1_CSPICTRL_XCH;
+ writel(reg, mxc_spi->base + MXC_CSPICTRL);
+}
+
+static int mx1_config(struct mxc_spi_data *mxc_spi,
+ struct mxc_spi_config *config)
+{
+ unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
+
+ reg |= mxc_spi_clkdiv_2(mxc_spi->spi_clk, config->speed_hz) <<
+ MX1_CSPICTRL_DR_SHIFT;
+ reg |= config->bpw - 1;
+
+ if (config->mode & SPI_CPHA)
+ reg |= MX1_CSPICTRL_PHA;
+ if (config->mode & SPI_CPOL)
+ reg |= MX1_CSPICTRL_POL;
+
+ writel(reg, mxc_spi->base + MXC_CSPICTRL);
+
+ return 0;
+}
+
+static int mx1_rx_available(struct mxc_spi_data *mxc_spi)
+{
+ return readl(mxc_spi->base + MXC_CSPIINT) & MX1_INTREG_RR;
+}
+
+static void mxc_spi_chipselect(struct spi_device *spi, int is_active)
+{
+ struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
+ unsigned int cs = 0;
+ int gpio = mxc_spi->chipselect[spi->chip_select];
+ struct mxc_spi_config config;
+
+ if (spi->mode & SPI_CS_HIGH)
+ cs = 1;
+
+ if (is_active == BITBANG_CS_INACTIVE) {
+ if (gpio >= 0)
+ gpio_set_value(gpio, !cs);
+ return;
+ }
+
+ config.bpw = spi->bits_per_word;
+ config.speed_hz = spi->max_speed_hz;
+ config.mode = spi->mode;
+ config.cs = mxc_spi->chipselect[spi->chip_select];
+
+ mxc_spi->config(mxc_spi, &config);
+
+ /* Initialize the functions for transfer */
+ if (config.bpw <= 8) {
+ mxc_spi->rx = mxc_spi_buf_rx_u8;
+ mxc_spi->tx = mxc_spi_buf_tx_u8;
+ } else if (config.bpw <= 16) {
+ mxc_spi->rx = mxc_spi_buf_rx_u16;
+ mxc_spi->tx = mxc_spi_buf_tx_u16;
+ } else if (config.bpw <= 32) {
+ mxc_spi->rx = mxc_spi_buf_rx_u32;
+ mxc_spi->tx = mxc_spi_buf_tx_u32;
+ } else
+ BUG();
+
+ if (gpio >= 0)
+ gpio_set_value(gpio, cs);
+
+ return;
+}
+
+static void mxc_spi_push(struct mxc_spi_data *mxc_spi)
+{
+ while (mxc_spi->txfifo < 8) {
+ if (!mxc_spi->count)
+ break;
+ mxc_spi->tx(mxc_spi);
+ mxc_spi->txfifo++;
+ }
+
+ mxc_spi->trigger(mxc_spi);
+}
+
+static irqreturn_t mxc_spi_isr(int irq, void *dev_id)
+{
+ struct mxc_spi_data *mxc_spi = dev_id;
+
+ while (mxc_spi->rx_available(mxc_spi)) {
+ mxc_spi->rx(mxc_spi);
+ mxc_spi->txfifo--;
+ }
+
+ if (mxc_spi->count) {
+ mxc_spi_push(mxc_spi);
+ return IRQ_HANDLED;
+ }
+
+ if (mxc_spi->txfifo) {
+ /* No data left to push, but still waiting for rx data,
+ * enable receive data available interrupt.
+ */
+ mxc_spi->intctrl(mxc_spi, MXC_INT_RR);
+ return IRQ_HANDLED;
+ }
+
+ mxc_spi->intctrl(mxc_spi, 0);
+ complete(&mxc_spi->xfer_done);
+
+ return IRQ_HANDLED;
+}
+
+static int mxc_spi_setupxfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
+ struct mxc_spi_config config;
+
+ config.bpw = t ? t->bits_per_word : spi->bits_per_word;
+ config.speed_hz = t ? t->speed_hz : spi->max_speed_hz;
+ config.mode = spi->mode;
+
+ mxc_spi->config(mxc_spi, &config);
+
+ return 0;
+}
+
+static int mxc_spi_transfer(struct spi_device *spi,
+ struct spi_transfer *transfer)
+{
+ struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
+
+ mxc_spi->tx_buf = transfer->tx_buf;
+ mxc_spi->rx_buf = transfer->rx_buf;
+ mxc_spi->count = transfer->len;
+ mxc_spi->txfifo = 0;
+
+ init_completion(&mxc_spi->xfer_done);
+
+ mxc_spi_push(mxc_spi);
+
+ mxc_spi->intctrl(mxc_spi, MXC_INT_TE);
+
+ wait_for_completion(&mxc_spi->xfer_done);
+
+ return transfer->len;
+}
+
+static int mxc_spi_setup(struct spi_device *spi)
+{
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ pr_debug("%s: mode %d, %u bpw, %d hz\n", __func__,
+ spi->mode, spi->bits_per_word, spi->max_speed_hz);
+
+ mxc_spi_chipselect(spi, BITBANG_CS_INACTIVE);
+
+ return 0;
+}
+
+static void mxc_spi_cleanup(struct spi_device *spi)
+{
+}
+
+static int __init mxc_spi_probe(struct platform_device *pdev)
+{
+ struct spi_imx_master *mxc_platform_info;
+ struct spi_master *master;
+ struct mxc_spi_data *mxc_spi;
+ struct resource *res;
+ int i, ret;
+
+ mxc_platform_info = (struct spi_imx_master *)pdev->dev.platform_data;
+ if (!mxc_platform_info) {
+ dev_err(&pdev->dev, "can't get the platform data\n");
+ return -EINVAL;
+ }
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct mxc_spi_data));
+ if (!master)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, master);
+
+ master->bus_num = pdev->id;
+ master->num_chipselect = mxc_platform_info->num_chipselect;
+
+ mxc_spi = spi_master_get_devdata(master);
+ mxc_spi->bitbang.master = spi_master_get(master);
+ mxc_spi->chipselect = mxc_platform_info->chipselect;
+
+ for (i = 0; i < master->num_chipselect; i++) {
+ if (mxc_spi->chipselect[i] < 0)
+ continue;
+ ret = gpio_request(mxc_spi->chipselect[i], DRIVER_NAME);
+ if (ret) {
+ i--;
+ while (i > 0)
+ if (mxc_spi->chipselect[i] >= 0)
+ gpio_free(mxc_spi->chipselect[i--]);
+ dev_err(&pdev->dev, "can't get cs gpios");
+ goto out_master_put;
+ }
+ gpio_direction_output(mxc_spi->chipselect[i], 1);
+ }
+
+ mxc_spi->bitbang.chipselect = mxc_spi_chipselect;
+ mxc_spi->bitbang.setup_transfer = mxc_spi_setupxfer;
+ mxc_spi->bitbang.txrx_bufs = mxc_spi_transfer;
+ mxc_spi->bitbang.master->setup = mxc_spi_setup;
+ mxc_spi->bitbang.master->cleanup = mxc_spi_cleanup;
+
+ init_completion(&mxc_spi->xfer_done);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "can't get platform resource\n");
+ ret = -ENOMEM;
+ goto out_gpio_free;
+ }
+
+ if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+ dev_err(&pdev->dev, "request_mem_region failed\n");
+ ret = -EBUSY;
+ goto out_gpio_free;
+ }
+
+ mxc_spi->base = ioremap(res->start, resource_size(res));
+ if (!mxc_spi->base) {
+ ret = -EINVAL;
+ goto out_release_mem;
+ }
+
+ mxc_spi->irq = platform_get_irq(pdev, 0);
+ if (!mxc_spi->irq) {
+ ret = -EINVAL;
+ goto out_iounmap;
+ }
+
+ ret = request_irq(mxc_spi->irq, mxc_spi_isr, 0, DRIVER_NAME, mxc_spi);
+ if (ret) {
+ dev_err(&pdev->dev, "can't get irq%d: %d\n", mxc_spi->irq, ret);
+ goto out_iounmap;
+ }
+
+ if (cpu_is_mx31() || cpu_is_mx35()) {
+ mxc_spi->intctrl = mx31_intctrl;
+ mxc_spi->config = mx31_config;
+ mxc_spi->trigger = mx31_trigger;
+ mxc_spi->rx_available = mx31_rx_available;
+ } else if (cpu_is_mx27() || cpu_is_mx21()) {
+ mxc_spi->intctrl = mx27_intctrl;
+ mxc_spi->config = mx27_config;
+ mxc_spi->trigger = mx27_trigger;
+ mxc_spi->rx_available = mx27_rx_available;
+ } else if (cpu_is_mx1()) {
+ mxc_spi->intctrl = mx1_intctrl;
+ mxc_spi->config = mx1_config;
+ mxc_spi->trigger = mx1_trigger;
+ mxc_spi->rx_available = mx1_rx_available;
+ } else
+ BUG();
+
+ mxc_spi->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(mxc_spi->clk)) {
+ dev_err(&pdev->dev, "unable to get clock\n");
+ ret = PTR_ERR(mxc_spi->clk);
+ goto out_free_irq;
+ }
+
+ clk_enable(mxc_spi->clk);
+ mxc_spi->spi_clk = clk_get_rate(mxc_spi->clk);
+
+ if (!cpu_is_mx31() || !cpu_is_mx35())
+ writel(1, mxc_spi->base + MXC_RESET);
+
+ mxc_spi->intctrl(mxc_spi, 0);
+
+ ret = spi_bitbang_start(&mxc_spi->bitbang);
+ if (ret) {
+ dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
+ goto out_clk_put;
+ }
+
+ dev_info(&pdev->dev, "probed\n");
+
+ return ret;
+
+out_clk_put:
+ clk_disable(mxc_spi->clk);
+ clk_put(mxc_spi->clk);
+out_free_irq:
+ free_irq(mxc_spi->irq, mxc_spi);
+out_iounmap:
+ iounmap(mxc_spi->base);
+out_release_mem:
+ release_mem_region(res->start, resource_size(res));
+out_gpio_free:
+ for (i = 0; i < master->num_chipselect; i++)
+ if (mxc_spi->chipselect[i] >= 0)
+ gpio_free(mxc_spi->chipselect[i]);
+out_master_put:
+ spi_master_put(master);
+ kfree(master);
+ platform_set_drvdata(pdev, NULL);
+ return ret;
+}
+
+static int __exit mxc_spi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct mxc_spi_data *mxc_spi = spi_master_get_devdata(master);
+ int i;
+
+ spi_bitbang_stop(&mxc_spi->bitbang);
+
+ writel(0, mxc_spi->base + MXC_CSPICTRL);
+ clk_disable(mxc_spi->clk);
+ clk_put(mxc_spi->clk);
+ free_irq(mxc_spi->irq, mxc_spi);
+ iounmap(mxc_spi->base);
+
+ for (i = 0; i < master->num_chipselect; i++)
+ if (mxc_spi->chipselect[i] >= 0)
+ gpio_free(mxc_spi->chipselect[i]);
+
+ spi_master_put(master);
+
+ release_mem_region(res->start, resource_size(res));
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver mxc_spi_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = mxc_spi_probe,
+ .remove = __exit_p(mxc_spi_remove),
+};
+
+static int __init mxc_spi_init(void)
+{
+ return platform_driver_register(&mxc_spi_driver);
+}
+
+static void __exit mxc_spi_exit(void)
+{
+ platform_driver_unregister(&mxc_spi_driver);
+}
+
+module_init(mxc_spi_init);
+module_exit(mxc_spi_exit);
+
+MODULE_DESCRIPTION("SPI Master Controller driver");
+MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index 9b80ad36dbb..ba1a872b221 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -41,6 +41,9 @@
#define OMAP2_MCSPI_MAX_FREQ 48000000
+/* OMAP2 has 3 SPI controllers, while OMAP3 has 4 */
+#define OMAP2_MCSPI_MAX_CTRL 4
+
#define OMAP2_MCSPI_REVISION 0x00
#define OMAP2_MCSPI_SYSCONFIG 0x10
#define OMAP2_MCSPI_SYSSTATUS 0x14
@@ -59,40 +62,40 @@
/* per-register bitmasks: */
-#define OMAP2_MCSPI_SYSCONFIG_SMARTIDLE (2 << 3)
-#define OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP (1 << 2)
-#define OMAP2_MCSPI_SYSCONFIG_AUTOIDLE (1 << 0)
-#define OMAP2_MCSPI_SYSCONFIG_SOFTRESET (1 << 1)
+#define OMAP2_MCSPI_SYSCONFIG_SMARTIDLE BIT(4)
+#define OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP BIT(2)
+#define OMAP2_MCSPI_SYSCONFIG_AUTOIDLE BIT(0)
+#define OMAP2_MCSPI_SYSCONFIG_SOFTRESET BIT(1)
-#define OMAP2_MCSPI_SYSSTATUS_RESETDONE (1 << 0)
+#define OMAP2_MCSPI_SYSSTATUS_RESETDONE BIT(0)
-#define OMAP2_MCSPI_MODULCTRL_SINGLE (1 << 0)
-#define OMAP2_MCSPI_MODULCTRL_MS (1 << 2)
-#define OMAP2_MCSPI_MODULCTRL_STEST (1 << 3)
+#define OMAP2_MCSPI_MODULCTRL_SINGLE BIT(0)
+#define OMAP2_MCSPI_MODULCTRL_MS BIT(2)
+#define OMAP2_MCSPI_MODULCTRL_STEST BIT(3)
-#define OMAP2_MCSPI_CHCONF_PHA (1 << 0)
-#define OMAP2_MCSPI_CHCONF_POL (1 << 1)
+#define OMAP2_MCSPI_CHCONF_PHA BIT(0)
+#define OMAP2_MCSPI_CHCONF_POL BIT(1)
#define OMAP2_MCSPI_CHCONF_CLKD_MASK (0x0f << 2)
-#define OMAP2_MCSPI_CHCONF_EPOL (1 << 6)
+#define OMAP2_MCSPI_CHCONF_EPOL BIT(6)
#define OMAP2_MCSPI_CHCONF_WL_MASK (0x1f << 7)
-#define OMAP2_MCSPI_CHCONF_TRM_RX_ONLY (0x01 << 12)
-#define OMAP2_MCSPI_CHCONF_TRM_TX_ONLY (0x02 << 12)
+#define OMAP2_MCSPI_CHCONF_TRM_RX_ONLY BIT(12)
+#define OMAP2_MCSPI_CHCONF_TRM_TX_ONLY BIT(13)
#define OMAP2_MCSPI_CHCONF_TRM_MASK (0x03 << 12)
-#define OMAP2_MCSPI_CHCONF_DMAW (1 << 14)
-#define OMAP2_MCSPI_CHCONF_DMAR (1 << 15)
-#define OMAP2_MCSPI_CHCONF_DPE0 (1 << 16)
-#define OMAP2_MCSPI_CHCONF_DPE1 (1 << 17)
-#define OMAP2_MCSPI_CHCONF_IS (1 << 18)
-#define OMAP2_MCSPI_CHCONF_TURBO (1 << 19)
-#define OMAP2_MCSPI_CHCONF_FORCE (1 << 20)
+#define OMAP2_MCSPI_CHCONF_DMAW BIT(14)
+#define OMAP2_MCSPI_CHCONF_DMAR BIT(15)
+#define OMAP2_MCSPI_CHCONF_DPE0 BIT(16)
+#define OMAP2_MCSPI_CHCONF_DPE1 BIT(17)
+#define OMAP2_MCSPI_CHCONF_IS BIT(18)
+#define OMAP2_MCSPI_CHCONF_TURBO BIT(19)
+#define OMAP2_MCSPI_CHCONF_FORCE BIT(20)
-#define OMAP2_MCSPI_CHSTAT_RXS (1 << 0)
-#define OMAP2_MCSPI_CHSTAT_TXS (1 << 1)
-#define OMAP2_MCSPI_CHSTAT_EOT (1 << 2)
+#define OMAP2_MCSPI_CHSTAT_RXS BIT(0)
+#define OMAP2_MCSPI_CHSTAT_TXS BIT(1)
+#define OMAP2_MCSPI_CHSTAT_EOT BIT(2)
-#define OMAP2_MCSPI_CHCTRL_EN (1 << 0)
+#define OMAP2_MCSPI_CHCTRL_EN BIT(0)
-#define OMAP2_MCSPI_WAKEUPENABLE_WKEN (1 << 0)
+#define OMAP2_MCSPI_WAKEUPENABLE_WKEN BIT(0)
/* We have 2 DMA channels per CS, one for RX and one for TX */
struct omap2_mcspi_dma {
@@ -131,8 +134,23 @@ struct omap2_mcspi_cs {
void __iomem *base;
unsigned long phys;
int word_len;
+ struct list_head node;
+ /* Context save and restore shadow register */
+ u32 chconf0;
+};
+
+/* used for context save and restore, structure members to be updated whenever
+ * corresponding registers are modified.
+ */
+struct omap2_mcspi_regs {
+ u32 sysconfig;
+ u32 modulctrl;
+ u32 wakeupenable;
+ struct list_head cs;
};
+static struct omap2_mcspi_regs omap2_mcspi_ctx[OMAP2_MCSPI_MAX_CTRL];
+
static struct workqueue_struct *omap2_mcspi_wq;
#define MOD_REG_BIT(val, mask, set) do { \
@@ -172,12 +190,27 @@ static inline u32 mcspi_read_cs_reg(const struct spi_device *spi, int idx)
return __raw_readl(cs->base + idx);
}
+static inline u32 mcspi_cached_chconf0(const struct spi_device *spi)
+{
+ struct omap2_mcspi_cs *cs = spi->controller_state;
+
+ return cs->chconf0;
+}
+
+static inline void mcspi_write_chconf0(const struct spi_device *spi, u32 val)
+{
+ struct omap2_mcspi_cs *cs = spi->controller_state;
+
+ cs->chconf0 = val;
+ mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, val);
+}
+
static void omap2_mcspi_set_dma_req(const struct spi_device *spi,
int is_read, int enable)
{
u32 l, rw;
- l = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0);
+ l = mcspi_cached_chconf0(spi);
if (is_read) /* 1 is read, 0 write */
rw = OMAP2_MCSPI_CHCONF_DMAR;
@@ -185,7 +218,7 @@ static void omap2_mcspi_set_dma_req(const struct spi_device *spi,
rw = OMAP2_MCSPI_CHCONF_DMAW;
MOD_REG_BIT(l, rw, enable);
- mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, l);
+ mcspi_write_chconf0(spi, l);
}
static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable)
@@ -200,9 +233,9 @@ static void omap2_mcspi_force_cs(struct spi_device *spi, int cs_active)
{
u32 l;
- l = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0);
+ l = mcspi_cached_chconf0(spi);
MOD_REG_BIT(l, OMAP2_MCSPI_CHCONF_FORCE, cs_active);
- mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, l);
+ mcspi_write_chconf0(spi, l);
}
static void omap2_mcspi_set_master_mode(struct spi_master *master)
@@ -217,6 +250,46 @@ static void omap2_mcspi_set_master_mode(struct spi_master *master)
MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_MS, 0);
MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_SINGLE, 1);
mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, l);
+
+ omap2_mcspi_ctx[master->bus_num - 1].modulctrl = l;
+}
+
+static void omap2_mcspi_restore_ctx(struct omap2_mcspi *mcspi)
+{
+ struct spi_master *spi_cntrl;
+ struct omap2_mcspi_cs *cs;
+ spi_cntrl = mcspi->master;
+
+ /* McSPI: context restore */
+ mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_MODULCTRL,
+ omap2_mcspi_ctx[spi_cntrl->bus_num - 1].modulctrl);
+
+ mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_SYSCONFIG,
+ omap2_mcspi_ctx[spi_cntrl->bus_num - 1].sysconfig);
+
+ mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_WAKEUPENABLE,
+ omap2_mcspi_ctx[spi_cntrl->bus_num - 1].wakeupenable);
+
+ list_for_each_entry(cs, &omap2_mcspi_ctx[spi_cntrl->bus_num - 1].cs,
+ node)
+ __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
+}
+static void omap2_mcspi_disable_clocks(struct omap2_mcspi *mcspi)
+{
+ clk_disable(mcspi->ick);
+ clk_disable(mcspi->fck);
+}
+
+static int omap2_mcspi_enable_clocks(struct omap2_mcspi *mcspi)
+{
+ if (clk_enable(mcspi->ick))
+ return -ENODEV;
+ if (clk_enable(mcspi->fck))
+ return -ENODEV;
+
+ omap2_mcspi_restore_ctx(mcspi);
+
+ return 0;
}
static unsigned
@@ -357,7 +430,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
c = count;
word_len = cs->word_len;
- l = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0);
+ l = mcspi_cached_chconf0(spi);
l &= ~OMAP2_MCSPI_CHCONF_TRM_MASK;
/* We store the pre-calculated register addresses on stack to speed
@@ -397,8 +470,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
* more word i/o: switch to rx+tx
*/
if (c == 0 && tx == NULL)
- mcspi_write_cs_reg(spi,
- OMAP2_MCSPI_CHCONF0, l);
+ mcspi_write_chconf0(spi, l);
*rx++ = __raw_readl(rx_reg);
#ifdef VERBOSE
dev_dbg(&spi->dev, "read-%d %02x\n",
@@ -436,8 +508,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
* more word i/o: switch to rx+tx
*/
if (c == 0 && tx == NULL)
- mcspi_write_cs_reg(spi,
- OMAP2_MCSPI_CHCONF0, l);
+ mcspi_write_chconf0(spi, l);
*rx++ = __raw_readl(rx_reg);
#ifdef VERBOSE
dev_dbg(&spi->dev, "read-%d %04x\n",
@@ -475,8 +546,7 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
* more word i/o: switch to rx+tx
*/
if (c == 0 && tx == NULL)
- mcspi_write_cs_reg(spi,
- OMAP2_MCSPI_CHCONF0, l);
+ mcspi_write_chconf0(spi, l);
*rx++ = __raw_readl(rx_reg);
#ifdef VERBOSE
dev_dbg(&spi->dev, "read-%d %04x\n",
@@ -505,10 +575,12 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
{
struct omap2_mcspi_cs *cs = spi->controller_state;
struct omap2_mcspi *mcspi;
+ struct spi_master *spi_cntrl;
u32 l = 0, div = 0;
u8 word_len = spi->bits_per_word;
mcspi = spi_master_get_devdata(spi->master);
+ spi_cntrl = mcspi->master;
if (t != NULL && t->bits_per_word)
word_len = t->bits_per_word;
@@ -522,7 +594,7 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
} else
div = 15;
- l = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0);
+ l = mcspi_cached_chconf0(spi);
/* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS
* REVISIT: this controller could support SPI_3WIRE mode.
@@ -554,7 +626,7 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
else
l &= ~OMAP2_MCSPI_CHCONF_PHA;
- mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, l);
+ mcspi_write_chconf0(spi, l);
dev_dbg(&spi->dev, "setup: speed %d, sample %s edge, clk %s\n",
OMAP2_MCSPI_MAX_FREQ / (1 << div),
@@ -647,7 +719,11 @@ static int omap2_mcspi_setup(struct spi_device *spi)
return -ENOMEM;
cs->base = mcspi->base + spi->chip_select * 0x14;
cs->phys = mcspi->phys + spi->chip_select * 0x14;
+ cs->chconf0 = 0;
spi->controller_state = cs;
+ /* Link this to context save list */
+ list_add_tail(&cs->node,
+ &omap2_mcspi_ctx[mcspi->master->bus_num - 1].cs);
}
if (mcspi_dma->dma_rx_channel == -1
@@ -657,11 +733,11 @@ static int omap2_mcspi_setup(struct spi_device *spi)
return ret;
}
- clk_enable(mcspi->ick);
- clk_enable(mcspi->fck);
+ if (omap2_mcspi_enable_clocks(mcspi))
+ return -ENODEV;
+
ret = omap2_mcspi_setup_transfer(spi, NULL);
- clk_disable(mcspi->fck);
- clk_disable(mcspi->ick);
+ omap2_mcspi_disable_clocks(mcspi);
return ret;
}
@@ -670,10 +746,15 @@ static void omap2_mcspi_cleanup(struct spi_device *spi)
{
struct omap2_mcspi *mcspi;
struct omap2_mcspi_dma *mcspi_dma;
+ struct omap2_mcspi_cs *cs;
mcspi = spi_master_get_devdata(spi->master);
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
+ /* Unlink controller state from context save list */
+ cs = spi->controller_state;
+ list_del(&cs->node);
+
kfree(spi->controller_state);
if (mcspi_dma->dma_rx_channel != -1) {
@@ -693,8 +774,8 @@ static void omap2_mcspi_work(struct work_struct *work)
mcspi = container_of(work, struct omap2_mcspi, work);
spin_lock_irq(&mcspi->lock);
- clk_enable(mcspi->ick);
- clk_enable(mcspi->fck);
+ if (omap2_mcspi_enable_clocks(mcspi))
+ goto out;
/* We only enable one channel at a time -- the one whose message is
* at the head of the queue -- although this controller would gladly
@@ -741,13 +822,13 @@ static void omap2_mcspi_work(struct work_struct *work)
cs_active = 1;
}
- chconf = mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0);
+ chconf = mcspi_cached_chconf0(spi);
chconf &= ~OMAP2_MCSPI_CHCONF_TRM_MASK;
if (t->tx_buf == NULL)
chconf |= OMAP2_MCSPI_CHCONF_TRM_RX_ONLY;
else if (t->rx_buf == NULL)
chconf |= OMAP2_MCSPI_CHCONF_TRM_TX_ONLY;
- mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, chconf);
+ mcspi_write_chconf0(spi, chconf);
if (t->len) {
unsigned count;
@@ -796,9 +877,9 @@ static void omap2_mcspi_work(struct work_struct *work)
spin_lock_irq(&mcspi->lock);
}
- clk_disable(mcspi->fck);
- clk_disable(mcspi->ick);
+ omap2_mcspi_disable_clocks(mcspi);
+out:
spin_unlock_irq(&mcspi->lock);
}
@@ -885,8 +966,8 @@ static int __init omap2_mcspi_reset(struct omap2_mcspi *mcspi)
struct spi_master *master = mcspi->master;
u32 tmp;
- clk_enable(mcspi->ick);
- clk_enable(mcspi->fck);
+ if (omap2_mcspi_enable_clocks(mcspi))
+ return -1;
mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG,
OMAP2_MCSPI_SYSCONFIG_SOFTRESET);
@@ -894,18 +975,18 @@ static int __init omap2_mcspi_reset(struct omap2_mcspi *mcspi)
tmp = mcspi_read_reg(master, OMAP2_MCSPI_SYSSTATUS);
} while (!(tmp & OMAP2_MCSPI_SYSSTATUS_RESETDONE));
- mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG,
- OMAP2_MCSPI_SYSCONFIG_AUTOIDLE |
- OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP |
- OMAP2_MCSPI_SYSCONFIG_SMARTIDLE);
+ tmp = OMAP2_MCSPI_SYSCONFIG_AUTOIDLE |
+ OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP |
+ OMAP2_MCSPI_SYSCONFIG_SMARTIDLE;
+ mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG, tmp);
+ omap2_mcspi_ctx[master->bus_num - 1].sysconfig = tmp;
- mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
- OMAP2_MCSPI_WAKEUPENABLE_WKEN);
+ tmp = OMAP2_MCSPI_WAKEUPENABLE_WKEN;
+ mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE, tmp);
+ omap2_mcspi_ctx[master->bus_num - 1].wakeupenable = tmp;
omap2_mcspi_set_master_mode(master);
-
- clk_disable(mcspi->fck);
- clk_disable(mcspi->ick);
+ omap2_mcspi_disable_clocks(mcspi);
return 0;
}
@@ -933,7 +1014,8 @@ static u8 __initdata spi2_txdma_id[] = {
OMAP24XX_DMA_SPI2_TX1,
};
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX) \
+ || defined(CONFIG_ARCH_OMAP4)
static u8 __initdata spi3_rxdma_id[] = {
OMAP24XX_DMA_SPI3_RX0,
OMAP24XX_DMA_SPI3_RX1,
@@ -945,7 +1027,7 @@ static u8 __initdata spi3_txdma_id[] = {
};
#endif
-#ifdef CONFIG_ARCH_OMAP3
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
static u8 __initdata spi4_rxdma_id[] = {
OMAP34XX_DMA_SPI4_RX0,
};
@@ -975,14 +1057,15 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
txdma_id = spi2_txdma_id;
num_chipselect = 2;
break;
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \
+ || defined(CONFIG_ARCH_OMAP4)
case 3:
rxdma_id = spi3_rxdma_id;
txdma_id = spi3_txdma_id;
num_chipselect = 2;
break;
#endif
-#ifdef CONFIG_ARCH_OMAP3
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
case 4:
rxdma_id = spi4_rxdma_id;
txdma_id = spi4_txdma_id;
@@ -1038,6 +1121,7 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
spin_lock_init(&mcspi->lock);
INIT_LIST_HEAD(&mcspi->msg_queue);
+ INIT_LIST_HEAD(&omap2_mcspi_ctx[master->bus_num - 1].cs);
mcspi->ick = clk_get(&pdev->dev, "ick");
if (IS_ERR(mcspi->ick)) {
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index 8980a5640bd..e75ba9b2889 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -213,7 +213,7 @@ static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t)
unsigned bits = ust->bits_per_word;
unsigned bytes;
u16 val, w;
- int status = 0;;
+ int status = 0;
if (!t->tx_buf && !t->rx_buf)
return 0;
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 8a1fb608e8f..c8c2b693ffa 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -1731,7 +1731,7 @@ static int __init pxa2xx_spi_init(void)
{
return platform_driver_probe(&driver, pxa2xx_spi_probe);
}
-module_init(pxa2xx_spi_init);
+subsys_initcall(pxa2xx_spi_init);
static void __exit pxa2xx_spi_exit(void)
{
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 70845ccd85c..b76f2468a84 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -23,6 +23,7 @@
#include <linux/init.h>
#include <linux/cache.h>
#include <linux/mutex.h>
+#include <linux/mod_devicetable.h>
#include <linux/spi/spi.h>
@@ -59,9 +60,32 @@ static struct device_attribute spi_dev_attrs[] = {
* and the sysfs version makes coldplug work too.
*/
+static const struct spi_device_id *spi_match_id(const struct spi_device_id *id,
+ const struct spi_device *sdev)
+{
+ while (id->name[0]) {
+ if (!strcmp(sdev->modalias, id->name))
+ return id;
+ id++;
+ }
+ return NULL;
+}
+
+const struct spi_device_id *spi_get_device_id(const struct spi_device *sdev)
+{
+ const struct spi_driver *sdrv = to_spi_driver(sdev->dev.driver);
+
+ return spi_match_id(sdrv->id_table, sdev);
+}
+EXPORT_SYMBOL_GPL(spi_get_device_id);
+
static int spi_match_device(struct device *dev, struct device_driver *drv)
{
const struct spi_device *spi = to_spi_device(dev);
+ const struct spi_driver *sdrv = to_spi_driver(drv);
+
+ if (sdrv->id_table)
+ return !!spi_match_id(sdrv->id_table, spi);
return strcmp(spi->modalias, drv->name) == 0;
}
@@ -70,7 +94,7 @@ static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
{
const struct spi_device *spi = to_spi_device(dev);
- add_uevent_var(env, "MODALIAS=%s", spi->modalias);
+ add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias);
return 0;
}
@@ -639,6 +663,65 @@ int spi_setup(struct spi_device *spi)
}
EXPORT_SYMBOL_GPL(spi_setup);
+/**
+ * spi_async - asynchronous SPI transfer
+ * @spi: device with which data will be exchanged
+ * @message: describes the data transfers, including completion callback
+ * Context: any (irqs may be blocked, etc)
+ *
+ * This call may be used in_irq and other contexts which can't sleep,
+ * as well as from task contexts which can sleep.
+ *
+ * The completion callback is invoked in a context which can't sleep.
+ * Before that invocation, the value of message->status is undefined.
+ * When the callback is issued, message->status holds either zero (to
+ * indicate complete success) or a negative error code. After that
+ * callback returns, the driver which issued the transfer request may
+ * deallocate the associated memory; it's no longer in use by any SPI
+ * core or controller driver code.
+ *
+ * Note that although all messages to a spi_device are handled in
+ * FIFO order, messages may go to different devices in other orders.
+ * Some device might be higher priority, or have various "hard" access
+ * time requirements, for example.
+ *
+ * On detection of any fault during the transfer, processing of
+ * the entire message is aborted, and the device is deselected.
+ * Until returning from the associated message completion callback,
+ * no other spi_message queued to that device will be processed.
+ * (This rule applies equally to all the synchronous transfer calls,
+ * which are wrappers around this core asynchronous primitive.)
+ */
+int spi_async(struct spi_device *spi, struct spi_message *message)
+{
+ struct spi_master *master = spi->master;
+
+ /* Half-duplex links include original MicroWire, and ones with
+ * only one data pin like SPI_3WIRE (switches direction) or where
+ * either MOSI or MISO is missing. They can also be caused by
+ * software limitations.
+ */
+ if ((master->flags & SPI_MASTER_HALF_DUPLEX)
+ || (spi->mode & SPI_3WIRE)) {
+ struct spi_transfer *xfer;
+ unsigned flags = master->flags;
+
+ list_for_each_entry(xfer, &message->transfers, transfer_list) {
+ if (xfer->rx_buf && xfer->tx_buf)
+ return -EINVAL;
+ if ((flags & SPI_MASTER_NO_TX) && xfer->tx_buf)
+ return -EINVAL;
+ if ((flags & SPI_MASTER_NO_RX) && xfer->rx_buf)
+ return -EINVAL;
+ }
+ }
+
+ message->spi = spi;
+ message->status = -EINPROGRESS;
+ return master->transfer(spi, message);
+}
+EXPORT_SYMBOL_GPL(spi_async);
+
/*-------------------------------------------------------------------------*/
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
deleted file mode 100644
index c195e45f7f3..00000000000
--- a/drivers/spi/spi_imx.c
+++ /dev/null
@@ -1,1770 +0,0 @@
-/*
- * drivers/spi/spi_imx.c
- *
- * Copyright (C) 2006 SWAPP
- * Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/workqueue.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
-
-#include <mach/hardware.h>
-#include <mach/imx-dma.h>
-#include <mach/spi_imx.h>
-
-/*-------------------------------------------------------------------------*/
-/* SPI Registers offsets from peripheral base address */
-#define SPI_RXDATA (0x00)
-#define SPI_TXDATA (0x04)
-#define SPI_CONTROL (0x08)
-#define SPI_INT_STATUS (0x0C)
-#define SPI_TEST (0x10)
-#define SPI_PERIOD (0x14)
-#define SPI_DMA (0x18)
-#define SPI_RESET (0x1C)
-
-/* SPI Control Register Bit Fields & Masks */
-#define SPI_CONTROL_BITCOUNT_MASK (0xF) /* Bit Count Mask */
-#define SPI_CONTROL_BITCOUNT(n) (((n) - 1) & SPI_CONTROL_BITCOUNT_MASK)
-#define SPI_CONTROL_POL (0x1 << 4) /* Clock Polarity Mask */
-#define SPI_CONTROL_POL_ACT_HIGH (0x0 << 4) /* Active high pol. (0=idle) */
-#define SPI_CONTROL_POL_ACT_LOW (0x1 << 4) /* Active low pol. (1=idle) */
-#define SPI_CONTROL_PHA (0x1 << 5) /* Clock Phase Mask */
-#define SPI_CONTROL_PHA_0 (0x0 << 5) /* Clock Phase 0 */
-#define SPI_CONTROL_PHA_1 (0x1 << 5) /* Clock Phase 1 */
-#define SPI_CONTROL_SSCTL (0x1 << 6) /* /SS Waveform Select Mask */
-#define SPI_CONTROL_SSCTL_0 (0x0 << 6) /* Master: /SS stays low between SPI burst
- Slave: RXFIFO advanced by BIT_COUNT */
-#define SPI_CONTROL_SSCTL_1 (0x1 << 6) /* Master: /SS insert pulse between SPI burst
- Slave: RXFIFO advanced by /SS rising edge */
-#define SPI_CONTROL_SSPOL (0x1 << 7) /* /SS Polarity Select Mask */
-#define SPI_CONTROL_SSPOL_ACT_LOW (0x0 << 7) /* /SS Active low */
-#define SPI_CONTROL_SSPOL_ACT_HIGH (0x1 << 7) /* /SS Active high */
-#define SPI_CONTROL_XCH (0x1 << 8) /* Exchange */
-#define SPI_CONTROL_SPIEN (0x1 << 9) /* SPI Module Enable */
-#define SPI_CONTROL_MODE (0x1 << 10) /* SPI Mode Select Mask */
-#define SPI_CONTROL_MODE_SLAVE (0x0 << 10) /* SPI Mode Slave */
-#define SPI_CONTROL_MODE_MASTER (0x1 << 10) /* SPI Mode Master */
-#define SPI_CONTROL_DRCTL (0x3 << 11) /* /SPI_RDY Control Mask */
-#define SPI_CONTROL_DRCTL_0 (0x0 << 11) /* Ignore /SPI_RDY */
-#define SPI_CONTROL_DRCTL_1 (0x1 << 11) /* /SPI_RDY falling edge triggers input */
-#define SPI_CONTROL_DRCTL_2 (0x2 << 11) /* /SPI_RDY active low level triggers input */
-#define SPI_CONTROL_DATARATE (0x7 << 13) /* Data Rate Mask */
-#define SPI_PERCLK2_DIV_MIN (0) /* PERCLK2:4 */
-#define SPI_PERCLK2_DIV_MAX (7) /* PERCLK2:512 */
-#define SPI_CONTROL_DATARATE_MIN (SPI_PERCLK2_DIV_MAX << 13)
-#define SPI_CONTROL_DATARATE_MAX (SPI_PERCLK2_DIV_MIN << 13)
-#define SPI_CONTROL_DATARATE_BAD (SPI_CONTROL_DATARATE_MIN + 1)
-
-/* SPI Interrupt/Status Register Bit Fields & Masks */
-#define SPI_STATUS_TE (0x1 << 0) /* TXFIFO Empty Status */
-#define SPI_STATUS_TH (0x1 << 1) /* TXFIFO Half Status */
-#define SPI_STATUS_TF (0x1 << 2) /* TXFIFO Full Status */
-#define SPI_STATUS_RR (0x1 << 3) /* RXFIFO Data Ready Status */
-#define SPI_STATUS_RH (0x1 << 4) /* RXFIFO Half Status */
-#define SPI_STATUS_RF (0x1 << 5) /* RXFIFO Full Status */
-#define SPI_STATUS_RO (0x1 << 6) /* RXFIFO Overflow */
-#define SPI_STATUS_BO (0x1 << 7) /* Bit Count Overflow */
-#define SPI_STATUS (0xFF) /* SPI Status Mask */
-#define SPI_INTEN_TE (0x1 << 8) /* TXFIFO Empty Interrupt Enable */
-#define SPI_INTEN_TH (0x1 << 9) /* TXFIFO Half Interrupt Enable */
-#define SPI_INTEN_TF (0x1 << 10) /* TXFIFO Full Interrupt Enable */
-#define SPI_INTEN_RE (0x1 << 11) /* RXFIFO Data Ready Interrupt Enable */
-#define SPI_INTEN_RH (0x1 << 12) /* RXFIFO Half Interrupt Enable */
-#define SPI_INTEN_RF (0x1 << 13) /* RXFIFO Full Interrupt Enable */
-#define SPI_INTEN_RO (0x1 << 14) /* RXFIFO Overflow Interrupt Enable */
-#define SPI_INTEN_BO (0x1 << 15) /* Bit Count Overflow Interrupt Enable */
-#define SPI_INTEN (0xFF << 8) /* SPI Interrupt Enable Mask */
-
-/* SPI Test Register Bit Fields & Masks */
-#define SPI_TEST_TXCNT (0xF << 0) /* TXFIFO Counter */
-#define SPI_TEST_RXCNT_LSB (4) /* RXFIFO Counter LSB */
-#define SPI_TEST_RXCNT (0xF << 4) /* RXFIFO Counter */
-#define SPI_TEST_SSTATUS (0xF << 8) /* State Machine Status */
-#define SPI_TEST_LBC (0x1 << 14) /* Loop Back Control */
-
-/* SPI Period Register Bit Fields & Masks */
-#define SPI_PERIOD_WAIT (0x7FFF << 0) /* Wait Between Transactions */
-#define SPI_PERIOD_MAX_WAIT (0x7FFF) /* Max Wait Between
- Transactions */
-#define SPI_PERIOD_CSRC (0x1 << 15) /* Period Clock Source Mask */
-#define SPI_PERIOD_CSRC_BCLK (0x0 << 15) /* Period Clock Source is
- Bit Clock */
-#define SPI_PERIOD_CSRC_32768 (0x1 << 15) /* Period Clock Source is
- 32.768 KHz Clock */
-
-/* SPI DMA Register Bit Fields & Masks */
-#define SPI_DMA_RHDMA (0x1 << 4) /* RXFIFO Half Status */
-#define SPI_DMA_RFDMA (0x1 << 5) /* RXFIFO Full Status */
-#define SPI_DMA_TEDMA (0x1 << 6) /* TXFIFO Empty Status */
-#define SPI_DMA_THDMA (0x1 << 7) /* TXFIFO Half Status */
-#define SPI_DMA_RHDEN (0x1 << 12) /* RXFIFO Half DMA Request Enable */
-#define SPI_DMA_RFDEN (0x1 << 13) /* RXFIFO Full DMA Request Enable */
-#define SPI_DMA_TEDEN (0x1 << 14) /* TXFIFO Empty DMA Request Enable */
-#define SPI_DMA_THDEN (0x1 << 15) /* TXFIFO Half DMA Request Enable */
-
-/* SPI Soft Reset Register Bit Fields & Masks */
-#define SPI_RESET_START (0x1) /* Start */
-
-/* Default SPI configuration values */
-#define SPI_DEFAULT_CONTROL \
-( \
- SPI_CONTROL_BITCOUNT(16) | \
- SPI_CONTROL_POL_ACT_HIGH | \
- SPI_CONTROL_PHA_0 | \
- SPI_CONTROL_SPIEN | \
- SPI_CONTROL_SSCTL_1 | \
- SPI_CONTROL_MODE_MASTER | \
- SPI_CONTROL_DRCTL_0 | \
- SPI_CONTROL_DATARATE_MIN \
-)
-#define SPI_DEFAULT_ENABLE_LOOPBACK (0)
-#define SPI_DEFAULT_ENABLE_DMA (0)
-#define SPI_DEFAULT_PERIOD_WAIT (8)
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/* TX/RX SPI FIFO size */
-#define SPI_FIFO_DEPTH (8)
-#define SPI_FIFO_BYTE_WIDTH (2)
-#define SPI_FIFO_OVERFLOW_MARGIN (2)
-
-/* DMA burst length for half full/empty request trigger */
-#define SPI_DMA_BLR (SPI_FIFO_DEPTH * SPI_FIFO_BYTE_WIDTH / 2)
-
-/* Dummy char output to achieve reads.
- Choosing something different from all zeroes may help pattern recogition
- for oscilloscope analysis, but may break some drivers. */
-#define SPI_DUMMY_u8 0
-#define SPI_DUMMY_u16 ((SPI_DUMMY_u8 << 8) | SPI_DUMMY_u8)
-#define SPI_DUMMY_u32 ((SPI_DUMMY_u16 << 16) | SPI_DUMMY_u16)
-
-/**
- * Macro to change a u32 field:
- * @r : register to edit
- * @m : bit mask
- * @v : new value for the field correctly bit-alligned
-*/
-#define u32_EDIT(r, m, v) r = (r & ~(m)) | (v)
-
-/* Message state */
-#define START_STATE ((void*)0)
-#define RUNNING_STATE ((void*)1)
-#define DONE_STATE ((void*)2)
-#define ERROR_STATE ((void*)-1)
-
-/* Queue state */
-#define QUEUE_RUNNING (0)
-#define QUEUE_STOPPED (1)
-
-#define IS_DMA_ALIGNED(x) (((u32)(x) & 0x03) == 0)
-#define DMA_ALIGNMENT 4
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/* Driver data structs */
-
-/* Context */
-struct driver_data {
- /* Driver model hookup */
- struct platform_device *pdev;
-
- /* SPI framework hookup */
- struct spi_master *master;
-
- /* IMX hookup */
- struct spi_imx_master *master_info;
-
- /* Memory resources and SPI regs virtual address */
- struct resource *ioarea;
- void __iomem *regs;
-
- /* SPI RX_DATA physical address */
- dma_addr_t rd_data_phys;
-
- /* Driver message queue */
- struct workqueue_struct *workqueue;
- struct work_struct work;
- spinlock_t lock;
- struct list_head queue;
- int busy;
- int run;
-
- /* Message Transfer pump */
- struct tasklet_struct pump_transfers;
-
- /* Current message, transfer and state */
- struct spi_message *cur_msg;
- struct spi_transfer *cur_transfer;
- struct chip_data *cur_chip;
-
- /* Rd / Wr buffers pointers */
- size_t len;
- void *tx;
- void *tx_end;
- void *rx;
- void *rx_end;
-
- u8 rd_only;
- u8 n_bytes;
- int cs_change;
-
- /* Function pointers */
- irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
- void (*cs_control)(u32 command);
-
- /* DMA setup */
- int rx_channel;
- int tx_channel;
- dma_addr_t rx_dma;
- dma_addr_t tx_dma;
- int rx_dma_needs_unmap;
- int tx_dma_needs_unmap;
- size_t tx_map_len;
- u32 dummy_dma_buf ____cacheline_aligned;
-
- struct clk *clk;
-};
-
-/* Runtime state */
-struct chip_data {
- u32 control;
- u32 period;
- u32 test;
-
- u8 enable_dma:1;
- u8 bits_per_word;
- u8 n_bytes;
- u32 max_speed_hz;
-
- void (*cs_control)(u32 command);
-};
-/*-------------------------------------------------------------------------*/
-
-
-static void pump_messages(struct work_struct *work);
-
-static void flush(struct driver_data *drv_data)
-{
- void __iomem *regs = drv_data->regs;
- u32 control;
-
- dev_dbg(&drv_data->pdev->dev, "flush\n");
-
- /* Wait for end of transaction */
- do {
- control = readl(regs + SPI_CONTROL);
- } while (control & SPI_CONTROL_XCH);
-
- /* Release chip select if requested, transfer delays are
- handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(SPI_CS_DEASSERT);
-
- /* Disable SPI to flush FIFOs */
- writel(control & ~SPI_CONTROL_SPIEN, regs + SPI_CONTROL);
- writel(control, regs + SPI_CONTROL);
-}
-
-static void restore_state(struct driver_data *drv_data)
-{
- void __iomem *regs = drv_data->regs;
- struct chip_data *chip = drv_data->cur_chip;
-
- /* Load chip registers */
- dev_dbg(&drv_data->pdev->dev,
- "restore_state\n"
- " test = 0x%08X\n"
- " control = 0x%08X\n",
- chip->test,
- chip->control);
- writel(chip->test, regs + SPI_TEST);
- writel(chip->period, regs + SPI_PERIOD);
- writel(0, regs + SPI_INT_STATUS);
- writel(chip->control, regs + SPI_CONTROL);
-}
-
-static void null_cs_control(u32 command)
-{
-}
-
-static inline u32 data_to_write(struct driver_data *drv_data)
-{
- return ((u32)(drv_data->tx_end - drv_data->tx)) / drv_data->n_bytes;
-}
-
-static inline u32 data_to_read(struct driver_data *drv_data)
-{
- return ((u32)(drv_data->rx_end - drv_data->rx)) / drv_data->n_bytes;
-}
-
-static int write(struct driver_data *drv_data)
-{
- void __iomem *regs = drv_data->regs;
- void *tx = drv_data->tx;
- void *tx_end = drv_data->tx_end;
- u8 n_bytes = drv_data->n_bytes;
- u32 remaining_writes;
- u32 fifo_avail_space;
- u32 n;
- u16 d;
-
- /* Compute how many fifo writes to do */
- remaining_writes = (u32)(tx_end - tx) / n_bytes;
- fifo_avail_space = SPI_FIFO_DEPTH -
- (readl(regs + SPI_TEST) & SPI_TEST_TXCNT);
- if (drv_data->rx && (fifo_avail_space > SPI_FIFO_OVERFLOW_MARGIN))
- /* Fix misunderstood receive overflow */
- fifo_avail_space -= SPI_FIFO_OVERFLOW_MARGIN;
- n = min(remaining_writes, fifo_avail_space);
-
- dev_dbg(&drv_data->pdev->dev,
- "write type %s\n"
- " remaining writes = %d\n"
- " fifo avail space = %d\n"
- " fifo writes = %d\n",
- (n_bytes == 1) ? "u8" : "u16",
- remaining_writes,
- fifo_avail_space,
- n);
-
- if (n > 0) {
- /* Fill SPI TXFIFO */
- if (drv_data->rd_only) {
- tx += n * n_bytes;
- while (n--)
- writel(SPI_DUMMY_u16, regs + SPI_TXDATA);
- } else {
- if (n_bytes == 1) {
- while (n--) {
- d = *(u8*)tx;
- writel(d, regs + SPI_TXDATA);
- tx += 1;
- }
- } else {
- while (n--) {
- d = *(u16*)tx;
- writel(d, regs + SPI_TXDATA);
- tx += 2;
- }
- }
- }
-
- /* Trigger transfer */
- writel(readl(regs + SPI_CONTROL) | SPI_CONTROL_XCH,
- regs + SPI_CONTROL);
-
- /* Update tx pointer */
- drv_data->tx = tx;
- }
-
- return (tx >= tx_end);
-}
-
-static int read(struct driver_data *drv_data)
-{
- void __iomem *regs = drv_data->regs;
- void *rx = drv_data->rx;
- void *rx_end = drv_data->rx_end;
- u8 n_bytes = drv_data->n_bytes;
- u32 remaining_reads;
- u32 fifo_rxcnt;
- u32 n;
- u16 d;
-
- /* Compute how many fifo reads to do */
- remaining_reads = (u32)(rx_end - rx) / n_bytes;
- fifo_rxcnt = (readl(regs + SPI_TEST) & SPI_TEST_RXCNT) >>
- SPI_TEST_RXCNT_LSB;
- n = min(remaining_reads, fifo_rxcnt);
-
- dev_dbg(&drv_data->pdev->dev,
- "read type %s\n"
- " remaining reads = %d\n"
- " fifo rx count = %d\n"
- " fifo reads = %d\n",
- (n_bytes == 1) ? "u8" : "u16",
- remaining_reads,
- fifo_rxcnt,
- n);
-
- if (n > 0) {
- /* Read SPI RXFIFO */
- if (n_bytes == 1) {
- while (n--) {
- d = readl(regs + SPI_RXDATA);
- *((u8*)rx) = d;
- rx += 1;
- }
- } else {
- while (n--) {
- d = readl(regs + SPI_RXDATA);
- *((u16*)rx) = d;
- rx += 2;
- }
- }
-
- /* Update rx pointer */
- drv_data->rx = rx;
- }
-
- return (rx >= rx_end);
-}
-
-static void *next_transfer(struct driver_data *drv_data)
-{
- struct spi_message *msg = drv_data->cur_msg;
- struct spi_transfer *trans = drv_data->cur_transfer;
-
- /* Move to next transfer */
- if (trans->transfer_list.next != &msg->transfers) {
- drv_data->cur_transfer =
- list_entry(trans->transfer_list.next,
- struct spi_transfer,
- transfer_list);
- return RUNNING_STATE;
- }
-
- return DONE_STATE;
-}
-
-static int map_dma_buffers(struct driver_data *drv_data)
-{
- struct spi_message *msg;
- struct device *dev;
- void *buf;
-
- drv_data->rx_dma_needs_unmap = 0;
- drv_data->tx_dma_needs_unmap = 0;
-
- if (!drv_data->master_info->enable_dma ||
- !drv_data->cur_chip->enable_dma)
- return -1;
-
- msg = drv_data->cur_msg;
- dev = &msg->spi->dev;
- if (msg->is_dma_mapped) {
- if (drv_data->tx_dma)
- /* The caller provided at least dma and cpu virtual
- address for write; pump_transfers() will consider the
- transfer as write only if cpu rx virtual address is
- NULL */
- return 0;
-
- if (drv_data->rx_dma) {
- /* The caller provided dma and cpu virtual address to
- performe read only transfer -->
- use drv_data->dummy_dma_buf for dummy writes to
- achive reads */
- buf = &drv_data->dummy_dma_buf;
- drv_data->tx_map_len = sizeof(drv_data->dummy_dma_buf);
- drv_data->tx_dma = dma_map_single(dev,
- buf,
- drv_data->tx_map_len,
- DMA_TO_DEVICE);
- if (dma_mapping_error(dev, drv_data->tx_dma))
- return -1;
-
- drv_data->tx_dma_needs_unmap = 1;
-
- /* Flags transfer as rd_only for pump_transfers() DMA
- regs programming (should be redundant) */
- drv_data->tx = NULL;
-
- return 0;
- }
- }
-
- if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
- return -1;
-
- if (drv_data->tx == NULL) {
- /* Read only message --> use drv_data->dummy_dma_buf for dummy
- writes to achive reads */
- buf = &drv_data->dummy_dma_buf;
- drv_data->tx_map_len = sizeof(drv_data->dummy_dma_buf);
- } else {
- buf = drv_data->tx;
- drv_data->tx_map_len = drv_data->len;
- }
- drv_data->tx_dma = dma_map_single(dev,
- buf,
- drv_data->tx_map_len,
- DMA_TO_DEVICE);
- if (dma_mapping_error(dev, drv_data->tx_dma))
- return -1;
- drv_data->tx_dma_needs_unmap = 1;
-
- /* NULL rx means write-only transfer and no map needed
- * since rx DMA will not be used */
- if (drv_data->rx) {
- buf = drv_data->rx;
- drv_data->rx_dma = dma_map_single(dev,
- buf,
- drv_data->len,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(dev, drv_data->rx_dma)) {
- if (drv_data->tx_dma) {
- dma_unmap_single(dev,
- drv_data->tx_dma,
- drv_data->tx_map_len,
- DMA_TO_DEVICE);
- drv_data->tx_dma_needs_unmap = 0;
- }
- return -1;
- }
- drv_data->rx_dma_needs_unmap = 1;
- }
-
- return 0;
-}
-
-static void unmap_dma_buffers(struct driver_data *drv_data)
-{
- struct spi_message *msg = drv_data->cur_msg;
- struct device *dev = &msg->spi->dev;
-
- if (drv_data->rx_dma_needs_unmap) {
- dma_unmap_single(dev,
- drv_data->rx_dma,
- drv_data->len,
- DMA_FROM_DEVICE);
- drv_data->rx_dma_needs_unmap = 0;
- }
- if (drv_data->tx_dma_needs_unmap) {
- dma_unmap_single(dev,
- drv_data->tx_dma,
- drv_data->tx_map_len,
- DMA_TO_DEVICE);
- drv_data->tx_dma_needs_unmap = 0;
- }
-}
-
-/* Caller already set message->status (dma is already blocked) */
-static void giveback(struct spi_message *message, struct driver_data *drv_data)
-{
- void __iomem *regs = drv_data->regs;
-
- /* Bring SPI to sleep; restore_state() and pump_transfer()
- will do new setup */
- writel(0, regs + SPI_INT_STATUS);
- writel(0, regs + SPI_DMA);
-
- /* Unconditioned deselct */
- drv_data->cs_control(SPI_CS_DEASSERT);
-
- message->state = NULL;
- if (message->complete)
- message->complete(message->context);
-
- drv_data->cur_msg = NULL;
- drv_data->cur_transfer = NULL;
- drv_data->cur_chip = NULL;
- queue_work(drv_data->workqueue, &drv_data->work);
-}
-
-static void dma_err_handler(int channel, void *data, int errcode)
-{
- struct driver_data *drv_data = data;
- struct spi_message *msg = drv_data->cur_msg;
-
- dev_dbg(&drv_data->pdev->dev, "dma_err_handler\n");
-
- /* Disable both rx and tx dma channels */
- imx_dma_disable(drv_data->rx_channel);
- imx_dma_disable(drv_data->tx_channel);
- unmap_dma_buffers(drv_data);
-
- flush(drv_data);
-
- msg->state = ERROR_STATE;
- tasklet_schedule(&drv_data->pump_transfers);
-}
-
-static void dma_tx_handler(int channel, void *data)
-{
- struct driver_data *drv_data = data;
-
- dev_dbg(&drv_data->pdev->dev, "dma_tx_handler\n");
-
- imx_dma_disable(channel);
-
- /* Now waits for TX FIFO empty */
- writel(SPI_INTEN_TE, drv_data->regs + SPI_INT_STATUS);
-}
-
-static irqreturn_t dma_transfer(struct driver_data *drv_data)
-{
- u32 status;
- struct spi_message *msg = drv_data->cur_msg;
- void __iomem *regs = drv_data->regs;
-
- status = readl(regs + SPI_INT_STATUS);
-
- if ((status & (SPI_INTEN_RO | SPI_STATUS_RO))
- == (SPI_INTEN_RO | SPI_STATUS_RO)) {
- writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS);
-
- imx_dma_disable(drv_data->tx_channel);
- imx_dma_disable(drv_data->rx_channel);
- unmap_dma_buffers(drv_data);
-
- flush(drv_data);
-
- dev_warn(&drv_data->pdev->dev,
- "dma_transfer - fifo overun\n");
-
- msg->state = ERROR_STATE;
- tasklet_schedule(&drv_data->pump_transfers);
-
- return IRQ_HANDLED;
- }
-
- if (status & SPI_STATUS_TE) {
- writel(status & ~SPI_INTEN_TE, regs + SPI_INT_STATUS);
-
- if (drv_data->rx) {
- /* Wait end of transfer before read trailing data */
- while (readl(regs + SPI_CONTROL) & SPI_CONTROL_XCH)
- cpu_relax();
-
- imx_dma_disable(drv_data->rx_channel);
- unmap_dma_buffers(drv_data);
-
- /* Release chip select if requested, transfer delays are
- handled in pump_transfers() */
- if (drv_data->cs_change)
- drv_data->cs_control(SPI_CS_DEASSERT);
-
- /* Calculate number of trailing data and read them */
- dev_dbg(&drv_data->pdev->dev,
- "dma_transfer - test = 0x%08X\n",
- readl(regs + SPI_TEST));
- drv_data->rx = drv_data->rx_end -
- ((readl(regs + SPI_TEST) &
- SPI_TEST_RXCNT) >>
- SPI_TEST_RXCNT_LSB)*drv_data->n_bytes;
- read(drv_data);
- } else {
- /* Write only transfer */
- unmap_dma_buffers(drv_data);
-
- flush(drv_data);
- }
-
- /* End of transfer, update total byte transfered */
- msg->actual_length += drv_data->len;
-
- /* Move to next transfer */
- msg->state = next_transfer(drv_data);
-
- /* Schedule transfer tasklet */
- tasklet_schedule(&drv_data->pump_transfers);
-
- return IRQ_HANDLED;
- }
-
- /* Opps problem detected */
- return IRQ_NONE;
-}
-
-static irqreturn_t interrupt_wronly_transfer(struct driver_data *drv_data)
-{
- struct spi_message *msg = drv_data->cur_msg;
- void __iomem *regs = drv_data->regs;
- u32 status;
- irqreturn_t handled = IRQ_NONE;
-
- status = readl(regs + SPI_INT_STATUS);
-
- if (status & SPI_INTEN_TE) {
- /* TXFIFO Empty Interrupt on the last transfered word */
- writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS);
- dev_dbg(&drv_data->pdev->dev,
- "interrupt_wronly_transfer - end of tx\n");
-
- flush(drv_data);
-
- /* Update total byte transfered */
- msg->actual_length += drv_data->len;
-
- /* Move to next transfer */
- msg->state = next_transfer(drv_data);
-
- /* Schedule transfer tasklet */
- tasklet_schedule(&drv_data->pump_transfers);
-
- return IRQ_HANDLED;
- } else {
- while (status & SPI_STATUS_TH) {
- dev_dbg(&drv_data->pdev->dev,
- "interrupt_wronly_transfer - status = 0x%08X\n",
- status);
-
- /* Pump data */
- if (write(drv_data)) {
- /* End of TXFIFO writes,
- now wait until TXFIFO is empty */
- writel(SPI_INTEN_TE, regs + SPI_INT_STATUS);
- return IRQ_HANDLED;
- }
-
- status = readl(regs + SPI_INT_STATUS);
-
- /* We did something */
- handled = IRQ_HANDLED;
- }
- }
-
- return handled;
-}
-
-static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
-{
- struct spi_message *msg = drv_data->cur_msg;
- void __iomem *regs = drv_data->regs;
- u32 status, control;
- irqreturn_t handled = IRQ_NONE;
- unsigned long limit;
-
- status = readl(regs + SPI_INT_STATUS);
-
- if (status & SPI_INTEN_TE) {
- /* TXFIFO Empty Interrupt on the last transfered word */
- writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS);
- dev_dbg(&drv_data->pdev->dev,
- "interrupt_transfer - end of tx\n");
-
- if (msg->state == ERROR_STATE) {
- /* RXFIFO overrun was detected and message aborted */
- flush(drv_data);
- } else {
- /* Wait for end of transaction */
- do {
- control = readl(regs + SPI_CONTROL);
- } while (control & SPI_CONTROL_XCH);
-
- /* Release chip select if requested, transfer delays are
- handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(SPI_CS_DEASSERT);
-
- /* Read trailing bytes */
- limit = loops_per_jiffy << 1;
- while ((read(drv_data) == 0) && --limit)
- cpu_relax();
-
- if (limit == 0)
- dev_err(&drv_data->pdev->dev,
- "interrupt_transfer - "
- "trailing byte read failed\n");
- else
- dev_dbg(&drv_data->pdev->dev,
- "interrupt_transfer - end of rx\n");
-
- /* Update total byte transfered */
- msg->actual_length += drv_data->len;
-
- /* Move to next transfer */
- msg->state = next_transfer(drv_data);
- }
-
- /* Schedule transfer tasklet */
- tasklet_schedule(&drv_data->pump_transfers);
-
- return IRQ_HANDLED;
- } else {
- while (status & (SPI_STATUS_TH | SPI_STATUS_RO)) {
- dev_dbg(&drv_data->pdev->dev,
- "interrupt_transfer - status = 0x%08X\n",
- status);
-
- if (status & SPI_STATUS_RO) {
- /* RXFIFO overrun, abort message end wait
- until TXFIFO is empty */
- writel(SPI_INTEN_TE, regs + SPI_INT_STATUS);
-
- dev_warn(&drv_data->pdev->dev,
- "interrupt_transfer - fifo overun\n"
- " data not yet written = %d\n"
- " data not yet read = %d\n",
- data_to_write(drv_data),
- data_to_read(drv_data));
-
- msg->state = ERROR_STATE;
-
- return IRQ_HANDLED;
- }
-
- /* Pump data */
- read(drv_data);
- if (write(drv_data)) {
- /* End of TXFIFO writes,
- now wait until TXFIFO is empty */
- writel(SPI_INTEN_TE, regs + SPI_INT_STATUS);
- return IRQ_HANDLED;
- }
-
- status = readl(regs + SPI_INT_STATUS);
-
- /* We did something */
- handled = IRQ_HANDLED;
- }
- }
-
- return handled;
-}
-
-static irqreturn_t spi_int(int irq, void *dev_id)
-{
- struct driver_data *drv_data = (struct driver_data *)dev_id;
-
- if (!drv_data->cur_msg) {
- dev_err(&drv_data->pdev->dev,
- "spi_int - bad message state\n");
- /* Never fail */
- return IRQ_HANDLED;
- }
-
- return drv_data->transfer_handler(drv_data);
-}
-
-static inline u32 spi_speed_hz(struct driver_data *drv_data, u32 data_rate)
-{
- return clk_get_rate(drv_data->clk) / (4 << ((data_rate) >> 13));
-}
-
-static u32 spi_data_rate(struct driver_data *drv_data, u32 speed_hz)
-{
- u32 div;
- u32 quantized_hz = clk_get_rate(drv_data->clk) >> 2;
-
- for (div = SPI_PERCLK2_DIV_MIN;
- div <= SPI_PERCLK2_DIV_MAX;
- div++, quantized_hz >>= 1) {
- if (quantized_hz <= speed_hz)
- /* Max available speed LEQ required speed */
- return div << 13;
- }
- return SPI_CONTROL_DATARATE_BAD;
-}
-
-static void pump_transfers(unsigned long data)
-{
- struct driver_data *drv_data = (struct driver_data *)data;
- struct spi_message *message;
- struct spi_transfer *transfer, *previous;
- struct chip_data *chip;
- void __iomem *regs;
- u32 tmp, control;
-
- dev_dbg(&drv_data->pdev->dev, "pump_transfer\n");
-
- message = drv_data->cur_msg;
-
- /* Handle for abort */
- if (message->state == ERROR_STATE) {
- message->status = -EIO;
- giveback(message, drv_data);
- return;
- }
-
- /* Handle end of message */
- if (message->state == DONE_STATE) {
- message->status = 0;
- giveback(message, drv_data);
- return;
- }
-
- chip = drv_data->cur_chip;
-
- /* Delay if requested at end of transfer*/
- transfer = drv_data->cur_transfer;
- if (message->state == RUNNING_STATE) {
- previous = list_entry(transfer->transfer_list.prev,
- struct spi_transfer,
- transfer_list);
- if (previous->delay_usecs)
- udelay(previous->delay_usecs);
- } else {
- /* START_STATE */
- message->state = RUNNING_STATE;
- drv_data->cs_control = chip->cs_control;
- }
-
- transfer = drv_data->cur_transfer;
- drv_data->tx = (void *)transfer->tx_buf;
- drv_data->tx_end = drv_data->tx + transfer->len;
- drv_data->rx = transfer->rx_buf;
- drv_data->rx_end = drv_data->rx + transfer->len;
- drv_data->rx_dma = transfer->rx_dma;
- drv_data->tx_dma = transfer->tx_dma;
- drv_data->len = transfer->len;
- drv_data->cs_change = transfer->cs_change;
- drv_data->rd_only = (drv_data->tx == NULL);
-
- regs = drv_data->regs;
- control = readl(regs + SPI_CONTROL);
-
- /* Bits per word setup */
- tmp = transfer->bits_per_word;
- if (tmp == 0) {
- /* Use device setup */
- tmp = chip->bits_per_word;
- drv_data->n_bytes = chip->n_bytes;
- } else
- /* Use per-transfer setup */
- drv_data->n_bytes = (tmp <= 8) ? 1 : 2;
- u32_EDIT(control, SPI_CONTROL_BITCOUNT_MASK, tmp - 1);
-
- /* Speed setup (surely valid because already checked) */
- tmp = transfer->speed_hz;
- if (tmp == 0)
- tmp = chip->max_speed_hz;
- tmp = spi_data_rate(drv_data, tmp);
- u32_EDIT(control, SPI_CONTROL_DATARATE, tmp);
-
- writel(control, regs + SPI_CONTROL);
-
- /* Assert device chip-select */
- drv_data->cs_control(SPI_CS_ASSERT);
-
- /* DMA cannot read/write SPI FIFOs other than 16 bits at a time; hence
- if bits_per_word is less or equal 8 PIO transfers are performed.
- Moreover DMA is convinient for transfer length bigger than FIFOs
- byte size. */
- if ((drv_data->n_bytes == 2) &&
- (drv_data->len > SPI_FIFO_DEPTH*SPI_FIFO_BYTE_WIDTH) &&
- (map_dma_buffers(drv_data) == 0)) {
- dev_dbg(&drv_data->pdev->dev,
- "pump dma transfer\n"
- " tx = %p\n"
- " tx_dma = %08X\n"
- " rx = %p\n"
- " rx_dma = %08X\n"
- " len = %d\n",
- drv_data->tx,
- (unsigned int)drv_data->tx_dma,
- drv_data->rx,
- (unsigned int)drv_data->rx_dma,
- drv_data->len);
-
- /* Ensure we have the correct interrupt handler */
- drv_data->transfer_handler = dma_transfer;
-
- /* Trigger transfer */
- writel(readl(regs + SPI_CONTROL) | SPI_CONTROL_XCH,
- regs + SPI_CONTROL);
-
- /* Setup tx DMA */
- if (drv_data->tx)
- /* Linear source address */
- CCR(drv_data->tx_channel) =
- CCR_DMOD_FIFO |
- CCR_SMOD_LINEAR |
- CCR_SSIZ_32 | CCR_DSIZ_16 |
- CCR_REN;
- else
- /* Read only transfer -> fixed source address for
- dummy write to achive read */
- CCR(drv_data->tx_channel) =
- CCR_DMOD_FIFO |
- CCR_SMOD_FIFO |
- CCR_SSIZ_32 | CCR_DSIZ_16 |
- CCR_REN;
-
- imx_dma_setup_single(
- drv_data->tx_channel,
- drv_data->tx_dma,
- drv_data->len,
- drv_data->rd_data_phys + 4,
- DMA_MODE_WRITE);
-
- if (drv_data->rx) {
- /* Setup rx DMA for linear destination address */
- CCR(drv_data->rx_channel) =
- CCR_DMOD_LINEAR |
- CCR_SMOD_FIFO |
- CCR_DSIZ_32 | CCR_SSIZ_16 |
- CCR_REN;
- imx_dma_setup_single(
- drv_data->rx_channel,
- drv_data->rx_dma,
- drv_data->len,
- drv_data->rd_data_phys,
- DMA_MODE_READ);
- imx_dma_enable(drv_data->rx_channel);
-
- /* Enable SPI interrupt */
- writel(SPI_INTEN_RO, regs + SPI_INT_STATUS);
-
- /* Set SPI to request DMA service on both
- Rx and Tx half fifo watermark */
- writel(SPI_DMA_RHDEN | SPI_DMA_THDEN, regs + SPI_DMA);
- } else
- /* Write only access -> set SPI to request DMA
- service on Tx half fifo watermark */
- writel(SPI_DMA_THDEN, regs + SPI_DMA);
-
- imx_dma_enable(drv_data->tx_channel);
- } else {
- dev_dbg(&drv_data->pdev->dev,
- "pump pio transfer\n"
- " tx = %p\n"
- " rx = %p\n"
- " len = %d\n",
- drv_data->tx,
- drv_data->rx,
- drv_data->len);
-
- /* Ensure we have the correct interrupt handler */
- if (drv_data->rx)
- drv_data->transfer_handler = interrupt_transfer;
- else
- drv_data->transfer_handler = interrupt_wronly_transfer;
-
- /* Enable SPI interrupt */
- if (drv_data->rx)
- writel(SPI_INTEN_TH | SPI_INTEN_RO,
- regs + SPI_INT_STATUS);
- else
- writel(SPI_INTEN_TH, regs + SPI_INT_STATUS);
- }
-}
-
-static void pump_messages(struct work_struct *work)
-{
- struct driver_data *drv_data =
- container_of(work, struct driver_data, work);
- unsigned long flags;
-
- /* Lock queue and check for queue work */
- spin_lock_irqsave(&drv_data->lock, flags);
- if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
- drv_data->busy = 0;
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return;
- }
-
- /* Make sure we are not already running a message */
- if (drv_data->cur_msg) {
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return;
- }
-
- /* Extract head of queue */
- drv_data->cur_msg = list_entry(drv_data->queue.next,
- struct spi_message, queue);
- list_del_init(&drv_data->cur_msg->queue);
- drv_data->busy = 1;
- spin_unlock_irqrestore(&drv_data->lock, flags);
-
- /* Initial message state */
- drv_data->cur_msg->state = START_STATE;
- drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
- struct spi_transfer,
- transfer_list);
-
- /* Setup the SPI using the per chip configuration */
- drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
- restore_state(drv_data);
-
- /* Mark as busy and launch transfers */
- tasklet_schedule(&drv_data->pump_transfers);
-}
-
-static int transfer(struct spi_device *spi, struct spi_message *msg)
-{
- struct driver_data *drv_data = spi_master_get_devdata(spi->master);
- u32 min_speed_hz, max_speed_hz, tmp;
- struct spi_transfer *trans;
- unsigned long flags;
-
- msg->actual_length = 0;
-
- /* Per transfer setup check */
- min_speed_hz = spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN);
- max_speed_hz = spi->max_speed_hz;
- list_for_each_entry(trans, &msg->transfers, transfer_list) {
- tmp = trans->bits_per_word;
- if (tmp > 16) {
- dev_err(&drv_data->pdev->dev,
- "message rejected : "
- "invalid transfer bits_per_word (%d bits)\n",
- tmp);
- goto msg_rejected;
- }
- tmp = trans->speed_hz;
- if (tmp) {
- if (tmp < min_speed_hz) {
- dev_err(&drv_data->pdev->dev,
- "message rejected : "
- "device min speed (%d Hz) exceeds "
- "required transfer speed (%d Hz)\n",
- min_speed_hz,
- tmp);
- goto msg_rejected;
- } else if (tmp > max_speed_hz) {
- dev_err(&drv_data->pdev->dev,
- "message rejected : "
- "transfer speed (%d Hz) exceeds "
- "device max speed (%d Hz)\n",
- tmp,
- max_speed_hz);
- goto msg_rejected;
- }
- }
- }
-
- /* Message accepted */
- msg->status = -EINPROGRESS;
- msg->state = START_STATE;
-
- spin_lock_irqsave(&drv_data->lock, flags);
- if (drv_data->run == QUEUE_STOPPED) {
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return -ESHUTDOWN;
- }
-
- list_add_tail(&msg->queue, &drv_data->queue);
- if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
- queue_work(drv_data->workqueue, &drv_data->work);
-
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return 0;
-
-msg_rejected:
- /* Message rejected and not queued */
- msg->status = -EINVAL;
- msg->state = ERROR_STATE;
- if (msg->complete)
- msg->complete(msg->context);
- return -EINVAL;
-}
-
-/* On first setup bad values must free chip_data memory since will cause
- spi_new_device to fail. Bad value setup from protocol driver are simply not
- applied and notified to the calling driver. */
-static int setup(struct spi_device *spi)
-{
- struct driver_data *drv_data = spi_master_get_devdata(spi->master);
- struct spi_imx_chip *chip_info;
- struct chip_data *chip;
- int first_setup = 0;
- u32 tmp;
- int status = 0;
-
- /* Get controller data */
- chip_info = spi->controller_data;
-
- /* Get controller_state */
- chip = spi_get_ctldata(spi);
- if (chip == NULL) {
- first_setup = 1;
-
- chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
- if (!chip) {
- dev_err(&spi->dev,
- "setup - cannot allocate controller state\n");
- return -ENOMEM;
- }
- chip->control = SPI_DEFAULT_CONTROL;
-
- if (chip_info == NULL) {
- /* spi_board_info.controller_data not is supplied */
- chip_info = kzalloc(sizeof(struct spi_imx_chip),
- GFP_KERNEL);
- if (!chip_info) {
- dev_err(&spi->dev,
- "setup - "
- "cannot allocate controller data\n");
- status = -ENOMEM;
- goto err_first_setup;
- }
- /* Set controller data default value */
- chip_info->enable_loopback =
- SPI_DEFAULT_ENABLE_LOOPBACK;
- chip_info->enable_dma = SPI_DEFAULT_ENABLE_DMA;
- chip_info->ins_ss_pulse = 1;
- chip_info->bclk_wait = SPI_DEFAULT_PERIOD_WAIT;
- chip_info->cs_control = null_cs_control;
- }
- }
-
- /* Now set controller state based on controller data */
-
- if (first_setup) {
- /* SPI loopback */
- if (chip_info->enable_loopback)
- chip->test = SPI_TEST_LBC;
- else
- chip->test = 0;
-
- /* SPI dma driven */
- chip->enable_dma = chip_info->enable_dma;
-
- /* SPI /SS pulse between spi burst */
- if (chip_info->ins_ss_pulse)
- u32_EDIT(chip->control,
- SPI_CONTROL_SSCTL, SPI_CONTROL_SSCTL_1);
- else
- u32_EDIT(chip->control,
- SPI_CONTROL_SSCTL, SPI_CONTROL_SSCTL_0);
-
- /* SPI bclk waits between each bits_per_word spi burst */
- if (chip_info->bclk_wait > SPI_PERIOD_MAX_WAIT) {
- dev_err(&spi->dev,
- "setup - "
- "bclk_wait exceeds max allowed (%d)\n",
- SPI_PERIOD_MAX_WAIT);
- goto err_first_setup;
- }
- chip->period = SPI_PERIOD_CSRC_BCLK |
- (chip_info->bclk_wait & SPI_PERIOD_WAIT);
- }
-
- /* SPI mode */
- tmp = spi->mode;
- if (tmp & SPI_CS_HIGH) {
- u32_EDIT(chip->control,
- SPI_CONTROL_SSPOL, SPI_CONTROL_SSPOL_ACT_HIGH);
- }
- switch (tmp & SPI_MODE_3) {
- case SPI_MODE_0:
- tmp = 0;
- break;
- case SPI_MODE_1:
- tmp = SPI_CONTROL_PHA_1;
- break;
- case SPI_MODE_2:
- tmp = SPI_CONTROL_POL_ACT_LOW;
- break;
- default:
- /* SPI_MODE_3 */
- tmp = SPI_CONTROL_PHA_1 | SPI_CONTROL_POL_ACT_LOW;
- break;
- }
- u32_EDIT(chip->control, SPI_CONTROL_POL | SPI_CONTROL_PHA, tmp);
-
- /* SPI word width */
- tmp = spi->bits_per_word;
- if (tmp > 16) {
- status = -EINVAL;
- dev_err(&spi->dev,
- "setup - "
- "invalid bits_per_word (%d)\n",
- tmp);
- if (first_setup)
- goto err_first_setup;
- else {
- /* Undo setup using chip as backup copy */
- tmp = chip->bits_per_word;
- spi->bits_per_word = tmp;
- }
- }
- chip->bits_per_word = tmp;
- u32_EDIT(chip->control, SPI_CONTROL_BITCOUNT_MASK, tmp - 1);
- chip->n_bytes = (tmp <= 8) ? 1 : 2;
-
- /* SPI datarate */
- tmp = spi_data_rate(drv_data, spi->max_speed_hz);
- if (tmp == SPI_CONTROL_DATARATE_BAD) {
- status = -EINVAL;
- dev_err(&spi->dev,
- "setup - "
- "HW min speed (%d Hz) exceeds required "
- "max speed (%d Hz)\n",
- spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN),
- spi->max_speed_hz);
- if (first_setup)
- goto err_first_setup;
- else
- /* Undo setup using chip as backup copy */
- spi->max_speed_hz = chip->max_speed_hz;
- } else {
- u32_EDIT(chip->control, SPI_CONTROL_DATARATE, tmp);
- /* Actual rounded max_speed_hz */
- tmp = spi_speed_hz(drv_data, tmp);
- spi->max_speed_hz = tmp;
- chip->max_speed_hz = tmp;
- }
-
- /* SPI chip-select management */
- if (chip_info->cs_control)
- chip->cs_control = chip_info->cs_control;
- else
- chip->cs_control = null_cs_control;
-
- /* Save controller_state */
- spi_set_ctldata(spi, chip);
-
- /* Summary */
- dev_dbg(&spi->dev,
- "setup succeded\n"
- " loopback enable = %s\n"
- " dma enable = %s\n"
- " insert /ss pulse = %s\n"
- " period wait = %d\n"
- " mode = %d\n"
- " bits per word = %d\n"
- " min speed = %d Hz\n"
- " rounded max speed = %d Hz\n",
- chip->test & SPI_TEST_LBC ? "Yes" : "No",
- chip->enable_dma ? "Yes" : "No",
- chip->control & SPI_CONTROL_SSCTL ? "Yes" : "No",
- chip->period & SPI_PERIOD_WAIT,
- spi->mode,
- spi->bits_per_word,
- spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN),
- spi->max_speed_hz);
- return status;
-
-err_first_setup:
- kfree(chip);
- return status;
-}
-
-static void cleanup(struct spi_device *spi)
-{
- kfree(spi_get_ctldata(spi));
-}
-
-static int __init init_queue(struct driver_data *drv_data)
-{
- INIT_LIST_HEAD(&drv_data->queue);
- spin_lock_init(&drv_data->lock);
-
- drv_data->run = QUEUE_STOPPED;
- drv_data->busy = 0;
-
- tasklet_init(&drv_data->pump_transfers,
- pump_transfers, (unsigned long)drv_data);
-
- INIT_WORK(&drv_data->work, pump_messages);
- drv_data->workqueue = create_singlethread_workqueue(
- dev_name(drv_data->master->dev.parent));
- if (drv_data->workqueue == NULL)
- return -EBUSY;
-
- return 0;
-}
-
-static int start_queue(struct driver_data *drv_data)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&drv_data->lock, flags);
-
- if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return -EBUSY;
- }
-
- drv_data->run = QUEUE_RUNNING;
- drv_data->cur_msg = NULL;
- drv_data->cur_transfer = NULL;
- drv_data->cur_chip = NULL;
- spin_unlock_irqrestore(&drv_data->lock, flags);
-
- queue_work(drv_data->workqueue, &drv_data->work);
-
- return 0;
-}
-
-static int stop_queue(struct driver_data *drv_data)
-{
- unsigned long flags;
- unsigned limit = 500;
- int status = 0;
-
- spin_lock_irqsave(&drv_data->lock, flags);
-
- /* This is a bit lame, but is optimized for the common execution path.
- * A wait_queue on the drv_data->busy could be used, but then the common
- * execution path (pump_messages) would be required to call wake_up or
- * friends on every SPI message. Do this instead */
- drv_data->run = QUEUE_STOPPED;
- while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
- spin_unlock_irqrestore(&drv_data->lock, flags);
- msleep(10);
- spin_lock_irqsave(&drv_data->lock, flags);
- }
-
- if (!list_empty(&drv_data->queue) || drv_data->busy)
- status = -EBUSY;
-
- spin_unlock_irqrestore(&drv_data->lock, flags);
-
- return status;
-}
-
-static int destroy_queue(struct driver_data *drv_data)
-{
- int status;
-
- status = stop_queue(drv_data);
- if (status != 0)
- return status;
-
- if (drv_data->workqueue)
- destroy_workqueue(drv_data->workqueue);
-
- return 0;
-}
-
-static int __init spi_imx_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct spi_imx_master *platform_info;
- struct spi_master *master;
- struct driver_data *drv_data;
- struct resource *res;
- int irq, status = 0;
-
- platform_info = dev->platform_data;
- if (platform_info == NULL) {
- dev_err(&pdev->dev, "probe - no platform data supplied\n");
- status = -ENODEV;
- goto err_no_pdata;
- }
-
- /* Allocate master with space for drv_data */
- master = spi_alloc_master(dev, sizeof(struct driver_data));
- if (!master) {
- dev_err(&pdev->dev, "probe - cannot alloc spi_master\n");
- status = -ENOMEM;
- goto err_no_mem;
- }
- drv_data = spi_master_get_devdata(master);
- drv_data->master = master;
- drv_data->master_info = platform_info;
- drv_data->pdev = pdev;
-
- /* the spi->mode bits understood by this driver: */
- master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
-
- master->bus_num = pdev->id;
- master->num_chipselect = platform_info->num_chipselect;
- master->dma_alignment = DMA_ALIGNMENT;
- master->cleanup = cleanup;
- master->setup = setup;
- master->transfer = transfer;
-
- drv_data->dummy_dma_buf = SPI_DUMMY_u32;
-
- drv_data->clk = clk_get(&pdev->dev, "perclk2");
- if (IS_ERR(drv_data->clk)) {
- dev_err(&pdev->dev, "probe - cannot get clock\n");
- status = PTR_ERR(drv_data->clk);
- goto err_no_clk;
- }
- clk_enable(drv_data->clk);
-
- /* Find and map resources */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "probe - MEM resources not defined\n");
- status = -ENODEV;
- goto err_no_iores;
- }
- drv_data->ioarea = request_mem_region(res->start,
- res->end - res->start + 1,
- pdev->name);
- if (drv_data->ioarea == NULL) {
- dev_err(&pdev->dev, "probe - cannot reserve region\n");
- status = -ENXIO;
- goto err_no_iores;
- }
- drv_data->regs = ioremap(res->start, res->end - res->start + 1);
- if (drv_data->regs == NULL) {
- dev_err(&pdev->dev, "probe - cannot map IO\n");
- status = -ENXIO;
- goto err_no_iomap;
- }
- drv_data->rd_data_phys = (dma_addr_t)res->start;
-
- /* Attach to IRQ */
- irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- dev_err(&pdev->dev, "probe - IRQ resource not defined\n");
- status = -ENODEV;
- goto err_no_irqres;
- }
- status = request_irq(irq, spi_int, IRQF_DISABLED,
- dev_name(dev), drv_data);
- if (status < 0) {
- dev_err(&pdev->dev, "probe - cannot get IRQ (%d)\n", status);
- goto err_no_irqres;
- }
-
- /* Setup DMA if requested */
- drv_data->tx_channel = -1;
- drv_data->rx_channel = -1;
- if (platform_info->enable_dma) {
- /* Get rx DMA channel */
- drv_data->rx_channel = imx_dma_request_by_prio("spi_imx_rx",
- DMA_PRIO_HIGH);
- if (drv_data->rx_channel < 0) {
- dev_err(dev,
- "probe - problem (%d) requesting rx channel\n",
- drv_data->rx_channel);
- goto err_no_rxdma;
- } else
- imx_dma_setup_handlers(drv_data->rx_channel, NULL,
- dma_err_handler, drv_data);
-
- /* Get tx DMA channel */
- drv_data->tx_channel = imx_dma_request_by_prio("spi_imx_tx",
- DMA_PRIO_MEDIUM);
- if (drv_data->tx_channel < 0) {
- dev_err(dev,
- "probe - problem (%d) requesting tx channel\n",
- drv_data->tx_channel);
- imx_dma_free(drv_data->rx_channel);
- goto err_no_txdma;
- } else
- imx_dma_setup_handlers(drv_data->tx_channel,
- dma_tx_handler, dma_err_handler,
- drv_data);
-
- /* Set request source and burst length for allocated channels */
- switch (drv_data->pdev->id) {
- case 1:
- /* Using SPI1 */
- RSSR(drv_data->rx_channel) = DMA_REQ_SPI1_R;
- RSSR(drv_data->tx_channel) = DMA_REQ_SPI1_T;
- break;
- case 2:
- /* Using SPI2 */
- RSSR(drv_data->rx_channel) = DMA_REQ_SPI2_R;
- RSSR(drv_data->tx_channel) = DMA_REQ_SPI2_T;
- break;
- default:
- dev_err(dev, "probe - bad SPI Id\n");
- imx_dma_free(drv_data->rx_channel);
- imx_dma_free(drv_data->tx_channel);
- status = -ENODEV;
- goto err_no_devid;
- }
- BLR(drv_data->rx_channel) = SPI_DMA_BLR;
- BLR(drv_data->tx_channel) = SPI_DMA_BLR;
- }
-
- /* Load default SPI configuration */
- writel(SPI_RESET_START, drv_data->regs + SPI_RESET);
- writel(0, drv_data->regs + SPI_RESET);
- writel(SPI_DEFAULT_CONTROL, drv_data->regs + SPI_CONTROL);
-
- /* Initial and start queue */
- status = init_queue(drv_data);
- if (status != 0) {
- dev_err(&pdev->dev, "probe - problem initializing queue\n");
- goto err_init_queue;
- }
- status = start_queue(drv_data);
- if (status != 0) {
- dev_err(&pdev->dev, "probe - problem starting queue\n");
- goto err_start_queue;
- }
-
- /* Register with the SPI framework */
- platform_set_drvdata(pdev, drv_data);
- status = spi_register_master(master);
- if (status != 0) {
- dev_err(&pdev->dev, "probe - problem registering spi master\n");
- goto err_spi_register;
- }
-
- dev_dbg(dev, "probe succeded\n");
- return 0;
-
-err_init_queue:
-err_start_queue:
-err_spi_register:
- destroy_queue(drv_data);
-
-err_no_rxdma:
-err_no_txdma:
-err_no_devid:
- free_irq(irq, drv_data);
-
-err_no_irqres:
- iounmap(drv_data->regs);
-
-err_no_iomap:
- release_resource(drv_data->ioarea);
- kfree(drv_data->ioarea);
-
-err_no_iores:
- clk_disable(drv_data->clk);
- clk_put(drv_data->clk);
-
-err_no_clk:
- spi_master_put(master);
-
-err_no_pdata:
-err_no_mem:
- return status;
-}
-
-static int __exit spi_imx_remove(struct platform_device *pdev)
-{
- struct driver_data *drv_data = platform_get_drvdata(pdev);
- int irq;
- int status = 0;
-
- if (!drv_data)
- return 0;
-
- tasklet_kill(&drv_data->pump_transfers);
-
- /* Remove the queue */
- status = destroy_queue(drv_data);
- if (status != 0) {
- dev_err(&pdev->dev, "queue remove failed (%d)\n", status);
- return status;
- }
-
- /* Reset SPI */
- writel(SPI_RESET_START, drv_data->regs + SPI_RESET);
- writel(0, drv_data->regs + SPI_RESET);
-
- /* Release DMA */
- if (drv_data->master_info->enable_dma) {
- RSSR(drv_data->rx_channel) = 0;
- RSSR(drv_data->tx_channel) = 0;
- imx_dma_free(drv_data->tx_channel);
- imx_dma_free(drv_data->rx_channel);
- }
-
- /* Release IRQ */
- irq = platform_get_irq(pdev, 0);
- if (irq >= 0)
- free_irq(irq, drv_data);
-
- clk_disable(drv_data->clk);
- clk_put(drv_data->clk);
-
- /* Release map resources */
- iounmap(drv_data->regs);
- release_resource(drv_data->ioarea);
- kfree(drv_data->ioarea);
-
- /* Disconnect from the SPI framework */
- spi_unregister_master(drv_data->master);
- spi_master_put(drv_data->master);
-
- /* Prevent double remove */
- platform_set_drvdata(pdev, NULL);
-
- dev_dbg(&pdev->dev, "remove succeded\n");
-
- return 0;
-}
-
-static void spi_imx_shutdown(struct platform_device *pdev)
-{
- struct driver_data *drv_data = platform_get_drvdata(pdev);
-
- /* Reset SPI */
- writel(SPI_RESET_START, drv_data->regs + SPI_RESET);
- writel(0, drv_data->regs + SPI_RESET);
-
- dev_dbg(&pdev->dev, "shutdown succeded\n");
-}
-
-#ifdef CONFIG_PM
-
-static int spi_imx_suspend(struct platform_device *pdev, pm_message_t state)
-{
- struct driver_data *drv_data = platform_get_drvdata(pdev);
- int status = 0;
-
- status = stop_queue(drv_data);
- if (status != 0) {
- dev_warn(&pdev->dev, "suspend cannot stop queue\n");
- return status;
- }
-
- dev_dbg(&pdev->dev, "suspended\n");
-
- return 0;
-}
-
-static int spi_imx_resume(struct platform_device *pdev)
-{
- struct driver_data *drv_data = platform_get_drvdata(pdev);
- int status = 0;
-
- /* Start the queue running */
- status = start_queue(drv_data);
- if (status != 0)
- dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
- else
- dev_dbg(&pdev->dev, "resumed\n");
-
- return status;
-}
-#else
-#define spi_imx_suspend NULL
-#define spi_imx_resume NULL
-#endif /* CONFIG_PM */
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:spi_imx");
-
-static struct platform_driver driver = {
- .driver = {
- .name = "spi_imx",
- .owner = THIS_MODULE,
- },
- .remove = __exit_p(spi_imx_remove),
- .shutdown = spi_imx_shutdown,
- .suspend = spi_imx_suspend,
- .resume = spi_imx_resume,
-};
-
-static int __init spi_imx_init(void)
-{
- return platform_driver_probe(&driver, spi_imx_probe);
-}
-module_init(spi_imx_init);
-
-static void __exit spi_imx_exit(void)
-{
- platform_driver_unregister(&driver);
-}
-module_exit(spi_imx_exit);
-
-MODULE_AUTHOR("Andrea Paterniani, <a.paterniani@swapp-eng.it>");
-MODULE_DESCRIPTION("iMX SPI Controller Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_ppc4xx.c b/drivers/spi/spi_ppc4xx.c
new file mode 100644
index 00000000000..140a18d6cf3
--- /dev/null
+++ b/drivers/spi/spi_ppc4xx.c
@@ -0,0 +1,612 @@
+/*
+ * SPI_PPC4XX SPI controller driver.
+ *
+ * Copyright (C) 2007 Gary Jennejohn <garyj@denx.de>
+ * Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ * Copyright 2009 Harris Corporation, Steven A. Falco <sfalco@harris.com>
+ *
+ * Based in part on drivers/spi/spi_s3c24xx.c
+ *
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+/*
+ * The PPC4xx SPI controller has no FIFO so each sent/received byte will
+ * generate an interrupt to the CPU. This can cause high CPU utilization.
+ * This driver allows platforms to reduce the interrupt load on the CPU
+ * during SPI transfers by setting max_speed_hz via the device tree.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/of_platform.h>
+#include <linux/of_spi.h>
+#include <linux/of_gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/io.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+
+/* bits in mode register - bit 0 is MSb */
+
+/*
+ * SPI_PPC4XX_MODE_SCP = 0 means "data latched on trailing edge of clock"
+ * SPI_PPC4XX_MODE_SCP = 1 means "data latched on leading edge of clock"
+ * Note: This is the inverse of CPHA.
+ */
+#define SPI_PPC4XX_MODE_SCP (0x80 >> 3)
+
+/* SPI_PPC4XX_MODE_SPE = 1 means "port enabled" */
+#define SPI_PPC4XX_MODE_SPE (0x80 >> 4)
+
+/*
+ * SPI_PPC4XX_MODE_RD = 0 means "MSB first" - this is the normal mode
+ * SPI_PPC4XX_MODE_RD = 1 means "LSB first" - this is bit-reversed mode
+ * Note: This is identical to SPI_LSB_FIRST.
+ */
+#define SPI_PPC4XX_MODE_RD (0x80 >> 5)
+
+/*
+ * SPI_PPC4XX_MODE_CI = 0 means "clock idles low"
+ * SPI_PPC4XX_MODE_CI = 1 means "clock idles high"
+ * Note: This is identical to CPOL.
+ */
+#define SPI_PPC4XX_MODE_CI (0x80 >> 6)
+
+/*
+ * SPI_PPC4XX_MODE_IL = 0 means "loopback disable"
+ * SPI_PPC4XX_MODE_IL = 1 means "loopback enable"
+ */
+#define SPI_PPC4XX_MODE_IL (0x80 >> 7)
+
+/* bits in control register */
+/* starts a transfer when set */
+#define SPI_PPC4XX_CR_STR (0x80 >> 7)
+
+/* bits in status register */
+/* port is busy with a transfer */
+#define SPI_PPC4XX_SR_BSY (0x80 >> 6)
+/* RxD ready */
+#define SPI_PPC4XX_SR_RBR (0x80 >> 7)
+
+/* clock settings (SCP and CI) for various SPI modes */
+#define SPI_CLK_MODE0 (SPI_PPC4XX_MODE_SCP | 0)
+#define SPI_CLK_MODE1 (0 | 0)
+#define SPI_CLK_MODE2 (SPI_PPC4XX_MODE_SCP | SPI_PPC4XX_MODE_CI)
+#define SPI_CLK_MODE3 (0 | SPI_PPC4XX_MODE_CI)
+
+#define DRIVER_NAME "spi_ppc4xx_of"
+
+struct spi_ppc4xx_regs {
+ u8 mode;
+ u8 rxd;
+ u8 txd;
+ u8 cr;
+ u8 sr;
+ u8 dummy;
+ /*
+ * Clock divisor modulus register
+ * This uses the follwing formula:
+ * SCPClkOut = OPBCLK/(4(CDM + 1))
+ * or
+ * CDM = (OPBCLK/4*SCPClkOut) - 1
+ * bit 0 is the MSb!
+ */
+ u8 cdm;
+};
+
+/* SPI Controller driver's private data. */
+struct ppc4xx_spi {
+ /* bitbang has to be first */
+ struct spi_bitbang bitbang;
+ struct completion done;
+
+ u64 mapbase;
+ u64 mapsize;
+ int irqnum;
+ /* need this to set the SPI clock */
+ unsigned int opb_freq;
+
+ /* for transfers */
+ int len;
+ int count;
+ /* data buffers */
+ const unsigned char *tx;
+ unsigned char *rx;
+
+ int *gpios;
+
+ struct spi_ppc4xx_regs __iomem *regs; /* pointer to the registers */
+ struct spi_master *master;
+ struct device *dev;
+};
+
+/* need this so we can set the clock in the chipselect routine */
+struct spi_ppc4xx_cs {
+ u8 mode;
+};
+
+static int spi_ppc4xx_txrx(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct ppc4xx_spi *hw;
+ u8 data;
+
+ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
+ t->tx_buf, t->rx_buf, t->len);
+
+ hw = spi_master_get_devdata(spi->master);
+
+ hw->tx = t->tx_buf;
+ hw->rx = t->rx_buf;
+ hw->len = t->len;
+ hw->count = 0;
+
+ /* send the first byte */
+ data = hw->tx ? hw->tx[0] : 0;
+ out_8(&hw->regs->txd, data);
+ out_8(&hw->regs->cr, SPI_PPC4XX_CR_STR);
+ wait_for_completion(&hw->done);
+
+ return hw->count;
+}
+
+static int spi_ppc4xx_setupxfer(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct ppc4xx_spi *hw = spi_master_get_devdata(spi->master);
+ struct spi_ppc4xx_cs *cs = spi->controller_state;
+ int scr;
+ u8 cdm = 0;
+ u32 speed;
+ u8 bits_per_word;
+
+ /* Start with the generic configuration for this device. */
+ bits_per_word = spi->bits_per_word;
+ speed = spi->max_speed_hz;
+
+ /*
+ * Modify the configuration if the transfer overrides it. Do not allow
+ * the transfer to overwrite the generic configuration with zeros.
+ */
+ if (t) {
+ if (t->bits_per_word)
+ bits_per_word = t->bits_per_word;
+
+ if (t->speed_hz)
+ speed = min(t->speed_hz, spi->max_speed_hz);
+ }
+
+ if (bits_per_word != 8) {
+ dev_err(&spi->dev, "invalid bits-per-word (%d)\n",
+ bits_per_word);
+ return -EINVAL;
+ }
+
+ if (!speed || (speed > spi->max_speed_hz)) {
+ dev_err(&spi->dev, "invalid speed_hz (%d)\n", speed);
+ return -EINVAL;
+ }
+
+ /* Write new configration */
+ out_8(&hw->regs->mode, cs->mode);
+
+ /* Set the clock */
+ /* opb_freq was already divided by 4 */
+ scr = (hw->opb_freq / speed) - 1;
+ if (scr > 0)
+ cdm = min(scr, 0xff);
+
+ dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", cdm, speed);
+
+ if (in_8(&hw->regs->cdm) != cdm)
+ out_8(&hw->regs->cdm, cdm);
+
+ spin_lock(&hw->bitbang.lock);
+ if (!hw->bitbang.busy) {
+ hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
+ /* Need to ndelay here? */
+ }
+ spin_unlock(&hw->bitbang.lock);
+
+ return 0;
+}
+
+static int spi_ppc4xx_setup(struct spi_device *spi)
+{
+ struct spi_ppc4xx_cs *cs = spi->controller_state;
+
+ if (spi->bits_per_word != 8) {
+ dev_err(&spi->dev, "invalid bits-per-word (%d)\n",
+ spi->bits_per_word);
+ return -EINVAL;
+ }
+
+ if (!spi->max_speed_hz) {
+ dev_err(&spi->dev, "invalid max_speed_hz (must be non-zero)\n");
+ return -EINVAL;
+ }
+
+ if (cs == NULL) {
+ cs = kzalloc(sizeof *cs, GFP_KERNEL);
+ if (!cs)
+ return -ENOMEM;
+ spi->controller_state = cs;
+ }
+
+ /*
+ * We set all bits of the SPI0_MODE register, so,
+ * no need to read-modify-write
+ */
+ cs->mode = SPI_PPC4XX_MODE_SPE;
+
+ switch (spi->mode & (SPI_CPHA | SPI_CPOL)) {
+ case SPI_MODE_0:
+ cs->mode |= SPI_CLK_MODE0;
+ break;
+ case SPI_MODE_1:
+ cs->mode |= SPI_CLK_MODE1;
+ break;
+ case SPI_MODE_2:
+ cs->mode |= SPI_CLK_MODE2;
+ break;
+ case SPI_MODE_3:
+ cs->mode |= SPI_CLK_MODE3;
+ break;
+ }
+
+ if (spi->mode & SPI_LSB_FIRST)
+ cs->mode |= SPI_PPC4XX_MODE_RD;
+
+ return 0;
+}
+
+static void spi_ppc4xx_chipsel(struct spi_device *spi, int value)
+{
+ struct ppc4xx_spi *hw = spi_master_get_devdata(spi->master);
+ unsigned int cs = spi->chip_select;
+ unsigned int cspol;
+
+ /*
+ * If there are no chip selects at all, or if this is the special
+ * case of a non-existent (dummy) chip select, do nothing.
+ */
+
+ if (!hw->master->num_chipselect || hw->gpios[cs] == -EEXIST)
+ return;
+
+ cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+ if (value == BITBANG_CS_INACTIVE)
+ cspol = !cspol;
+
+ gpio_set_value(hw->gpios[cs], cspol);
+}
+
+static irqreturn_t spi_ppc4xx_int(int irq, void *dev_id)
+{
+ struct ppc4xx_spi *hw;
+ u8 status;
+ u8 data;
+ unsigned int count;
+
+ hw = (struct ppc4xx_spi *)dev_id;
+
+ status = in_8(&hw->regs->sr);
+ if (!status)
+ return IRQ_NONE;
+
+ /*
+ * BSY de-asserts one cycle after the transfer is complete. The
+ * interrupt is asserted after the transfer is complete. The exact
+ * relationship is not documented, hence this code.
+ */
+
+ if (unlikely(status & SPI_PPC4XX_SR_BSY)) {
+ u8 lstatus;
+ int cnt = 0;
+
+ dev_dbg(hw->dev, "got interrupt but spi still busy?\n");
+ do {
+ ndelay(10);
+ lstatus = in_8(&hw->regs->sr);
+ } while (++cnt < 100 && lstatus & SPI_PPC4XX_SR_BSY);
+
+ if (cnt >= 100) {
+ dev_err(hw->dev, "busywait: too many loops!\n");
+ complete(&hw->done);
+ return IRQ_HANDLED;
+ } else {
+ /* status is always 1 (RBR) here */
+ status = in_8(&hw->regs->sr);
+ dev_dbg(hw->dev, "loops %d status %x\n", cnt, status);
+ }
+ }
+
+ count = hw->count;
+ hw->count++;
+
+ /* RBR triggered this interrupt. Therefore, data must be ready. */
+ data = in_8(&hw->regs->rxd);
+ if (hw->rx)
+ hw->rx[count] = data;
+
+ count++;
+
+ if (count < hw->len) {
+ data = hw->tx ? hw->tx[count] : 0;
+ out_8(&hw->regs->txd, data);
+ out_8(&hw->regs->cr, SPI_PPC4XX_CR_STR);
+ } else {
+ complete(&hw->done);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void spi_ppc4xx_cleanup(struct spi_device *spi)
+{
+ kfree(spi->controller_state);
+}
+
+static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
+{
+ /*
+ * On all 4xx PPC's the SPI bus is shared/multiplexed with
+ * the 2nd I2C bus. We need to enable the the SPI bus before
+ * using it.
+ */
+
+ /* need to clear bit 14 to enable SPC */
+ dcri_clrset(SDR0, SDR0_PFC1, 0x80000000 >> 14, 0);
+}
+
+static void free_gpios(struct ppc4xx_spi *hw)
+{
+ if (hw->master->num_chipselect) {
+ int i;
+ for (i = 0; i < hw->master->num_chipselect; i++)
+ if (gpio_is_valid(hw->gpios[i]))
+ gpio_free(hw->gpios[i]);
+
+ kfree(hw->gpios);
+ hw->gpios = NULL;
+ }
+}
+
+/*
+ * of_device layer stuff...
+ */
+static int __init spi_ppc4xx_of_probe(struct of_device *op,
+ const struct of_device_id *match)
+{
+ struct ppc4xx_spi *hw;
+ struct spi_master *master;
+ struct spi_bitbang *bbp;
+ struct resource resource;
+ struct device_node *np = op->node;
+ struct device *dev = &op->dev;
+ struct device_node *opbnp;
+ int ret;
+ int num_gpios;
+ const unsigned int *clk;
+
+ master = spi_alloc_master(dev, sizeof *hw);
+ if (master == NULL)
+ return -ENOMEM;
+ dev_set_drvdata(dev, master);
+ hw = spi_master_get_devdata(master);
+ hw->master = spi_master_get(master);
+ hw->dev = dev;
+
+ init_completion(&hw->done);
+
+ /*
+ * A count of zero implies a single SPI device without any chip-select.
+ * Note that of_gpio_count counts all gpios assigned to this spi master.
+ * This includes both "null" gpio's and real ones.
+ */
+ num_gpios = of_gpio_count(np);
+ if (num_gpios) {
+ int i;
+
+ hw->gpios = kzalloc(sizeof(int) * num_gpios, GFP_KERNEL);
+ if (!hw->gpios) {
+ ret = -ENOMEM;
+ goto free_master;
+ }
+
+ for (i = 0; i < num_gpios; i++) {
+ int gpio;
+ enum of_gpio_flags flags;
+
+ gpio = of_get_gpio_flags(np, i, &flags);
+ hw->gpios[i] = gpio;
+
+ if (gpio_is_valid(gpio)) {
+ /* Real CS - set the initial state. */
+ ret = gpio_request(gpio, np->name);
+ if (ret < 0) {
+ dev_err(dev, "can't request gpio "
+ "#%d: %d\n", i, ret);
+ goto free_gpios;
+ }
+
+ gpio_direction_output(gpio,
+ !!(flags & OF_GPIO_ACTIVE_LOW));
+ } else if (gpio == -EEXIST) {
+ ; /* No CS, but that's OK. */
+ } else {
+ dev_err(dev, "invalid gpio #%d: %d\n", i, gpio);
+ ret = -EINVAL;
+ goto free_gpios;
+ }
+ }
+ }
+
+ /* Setup the state for the bitbang driver */
+ bbp = &hw->bitbang;
+ bbp->master = hw->master;
+ bbp->setup_transfer = spi_ppc4xx_setupxfer;
+ bbp->chipselect = spi_ppc4xx_chipsel;
+ bbp->txrx_bufs = spi_ppc4xx_txrx;
+ bbp->use_dma = 0;
+ bbp->master->setup = spi_ppc4xx_setup;
+ bbp->master->cleanup = spi_ppc4xx_cleanup;
+
+ /* Allocate bus num dynamically. */
+ bbp->master->bus_num = -1;
+
+ /* the spi->mode bits understood by this driver: */
+ bbp->master->mode_bits =
+ SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST;
+
+ /* this many pins in all GPIO controllers */
+ bbp->master->num_chipselect = num_gpios;
+
+ /* Get the clock for the OPB */
+ opbnp = of_find_compatible_node(NULL, NULL, "ibm,opb");
+ if (opbnp == NULL) {
+ dev_err(dev, "OPB: cannot find node\n");
+ ret = -ENODEV;
+ goto free_gpios;
+ }
+ /* Get the clock (Hz) for the OPB */
+ clk = of_get_property(opbnp, "clock-frequency", NULL);
+ if (clk == NULL) {
+ dev_err(dev, "OPB: no clock-frequency property set\n");
+ of_node_put(opbnp);
+ ret = -ENODEV;
+ goto free_gpios;
+ }
+ hw->opb_freq = *clk;
+ hw->opb_freq >>= 2;
+ of_node_put(opbnp);
+
+ ret = of_address_to_resource(np, 0, &resource);
+ if (ret) {
+ dev_err(dev, "error while parsing device node resource\n");
+ goto free_gpios;
+ }
+ hw->mapbase = resource.start;
+ hw->mapsize = resource.end - resource.start + 1;
+
+ /* Sanity check */
+ if (hw->mapsize < sizeof(struct spi_ppc4xx_regs)) {
+ dev_err(dev, "too small to map registers\n");
+ ret = -EINVAL;
+ goto free_gpios;
+ }
+
+ /* Request IRQ */
+ hw->irqnum = irq_of_parse_and_map(np, 0);
+ ret = request_irq(hw->irqnum, spi_ppc4xx_int,
+ IRQF_DISABLED, "spi_ppc4xx_of", (void *)hw);
+ if (ret) {
+ dev_err(dev, "unable to allocate interrupt\n");
+ goto free_gpios;
+ }
+
+ if (!request_mem_region(hw->mapbase, hw->mapsize, DRIVER_NAME)) {
+ dev_err(dev, "resource unavailable\n");
+ ret = -EBUSY;
+ goto request_mem_error;
+ }
+
+ hw->regs = ioremap(hw->mapbase, sizeof(struct spi_ppc4xx_regs));
+
+ if (!hw->regs) {
+ dev_err(dev, "unable to memory map registers\n");
+ ret = -ENXIO;
+ goto map_io_error;
+ }
+
+ spi_ppc4xx_enable(hw);
+
+ /* Finally register our spi controller */
+ dev->dma_mask = 0;
+ ret = spi_bitbang_start(bbp);
+ if (ret) {
+ dev_err(dev, "failed to register SPI master\n");
+ goto unmap_regs;
+ }
+
+ dev_info(dev, "driver initialized\n");
+ of_register_spi_devices(master, np);
+
+ return 0;
+
+unmap_regs:
+ iounmap(hw->regs);
+map_io_error:
+ release_mem_region(hw->mapbase, hw->mapsize);
+request_mem_error:
+ free_irq(hw->irqnum, hw);
+free_gpios:
+ free_gpios(hw);
+free_master:
+ dev_set_drvdata(dev, NULL);
+ spi_master_put(master);
+
+ dev_err(dev, "initialization failed\n");
+ return ret;
+}
+
+static int __exit spi_ppc4xx_of_remove(struct of_device *op)
+{
+ struct spi_master *master = dev_get_drvdata(&op->dev);
+ struct ppc4xx_spi *hw = spi_master_get_devdata(master);
+
+ spi_bitbang_stop(&hw->bitbang);
+ dev_set_drvdata(&op->dev, NULL);
+ release_mem_region(hw->mapbase, hw->mapsize);
+ free_irq(hw->irqnum, hw);
+ iounmap(hw->regs);
+ free_gpios(hw);
+ return 0;
+}
+
+static struct of_device_id spi_ppc4xx_of_match[] = {
+ { .compatible = "ibm,ppc4xx-spi", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, spi_ppc4xx_of_match);
+
+static struct of_platform_driver spi_ppc4xx_of_driver = {
+ .match_table = spi_ppc4xx_of_match,
+ .probe = spi_ppc4xx_of_probe,
+ .remove = __exit_p(spi_ppc4xx_of_remove),
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init spi_ppc4xx_init(void)
+{
+ return of_register_platform_driver(&spi_ppc4xx_of_driver);
+}
+module_init(spi_ppc4xx_init);
+
+static void __exit spi_ppc4xx_exit(void)
+{
+ of_unregister_platform_driver(&spi_ppc4xx_of_driver);
+}
+module_exit(spi_ppc4xx_exit);
+
+MODULE_AUTHOR("Gary Jennejohn & Stefan Roese");
+MODULE_DESCRIPTION("Simple PPC4xx SPI Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 3f3119d760d..33d94f76b9e 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -20,17 +20,28 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/io.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <mach/hardware.h>
-
#include <plat/regs-spi.h>
#include <mach/spi.h>
+/**
+ * s3c24xx_spi_devstate - per device data
+ * @hz: Last frequency calculated for @sppre field.
+ * @mode: Last mode setting for the @spcon field.
+ * @spcon: Value to write to the SPCON register.
+ * @sppre: Value to write to the SPPRE register.
+ */
+struct s3c24xx_spi_devstate {
+ unsigned int hz;
+ unsigned int mode;
+ u8 spcon;
+ u8 sppre;
+};
+
struct s3c24xx_spi {
/* bitbang has to be first */
struct spi_bitbang bitbang;
@@ -71,43 +82,31 @@ static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol)
static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
{
+ struct s3c24xx_spi_devstate *cs = spi->controller_state;
struct s3c24xx_spi *hw = to_hw(spi);
unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
- unsigned int spcon;
+
+ /* change the chipselect state and the state of the spi engine clock */
switch (value) {
case BITBANG_CS_INACTIVE:
hw->set_cs(hw->pdata, spi->chip_select, cspol^1);
+ writeb(cs->spcon, hw->regs + S3C2410_SPCON);
break;
case BITBANG_CS_ACTIVE:
- spcon = readb(hw->regs + S3C2410_SPCON);
-
- if (spi->mode & SPI_CPHA)
- spcon |= S3C2410_SPCON_CPHA_FMTB;
- else
- spcon &= ~S3C2410_SPCON_CPHA_FMTB;
-
- if (spi->mode & SPI_CPOL)
- spcon |= S3C2410_SPCON_CPOL_HIGH;
- else
- spcon &= ~S3C2410_SPCON_CPOL_HIGH;
-
- spcon |= S3C2410_SPCON_ENSCK;
-
- /* write new configration */
-
- writeb(spcon, hw->regs + S3C2410_SPCON);
+ writeb(cs->spcon | S3C2410_SPCON_ENSCK,
+ hw->regs + S3C2410_SPCON);
hw->set_cs(hw->pdata, spi->chip_select, cspol);
-
break;
}
}
-static int s3c24xx_spi_setupxfer(struct spi_device *spi,
- struct spi_transfer *t)
+static int s3c24xx_spi_update_state(struct spi_device *spi,
+ struct spi_transfer *t)
{
struct s3c24xx_spi *hw = to_hw(spi);
+ struct s3c24xx_spi_devstate *cs = spi->controller_state;
unsigned int bpw;
unsigned int hz;
unsigned int div;
@@ -127,41 +126,89 @@ static int s3c24xx_spi_setupxfer(struct spi_device *spi,
return -EINVAL;
}
- clk = clk_get_rate(hw->clk);
- div = DIV_ROUND_UP(clk, hz * 2) - 1;
+ if (spi->mode != cs->mode) {
+ u8 spcon = SPCON_DEFAULT;
- if (div > 255)
- div = 255;
+ if (spi->mode & SPI_CPHA)
+ spcon |= S3C2410_SPCON_CPHA_FMTB;
- dev_dbg(&spi->dev, "setting pre-scaler to %d (wanted %d, got %ld)\n",
- div, hz, clk / (2 * (div + 1)));
+ if (spi->mode & SPI_CPOL)
+ spcon |= S3C2410_SPCON_CPOL_HIGH;
+ cs->mode = spi->mode;
+ cs->spcon = spcon;
+ }
- writeb(div, hw->regs + S3C2410_SPPRE);
+ if (cs->hz != hz) {
+ clk = clk_get_rate(hw->clk);
+ div = DIV_ROUND_UP(clk, hz * 2) - 1;
- spin_lock(&hw->bitbang.lock);
- if (!hw->bitbang.busy) {
- hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
- /* need to ndelay for 0.5 clocktick ? */
+ if (div > 255)
+ div = 255;
+
+ dev_dbg(&spi->dev, "pre-scaler=%d (wanted %d, got %ld)\n",
+ div, hz, clk / (2 * (div + 1)));
+
+ cs->hz = hz;
+ cs->sppre = div;
}
- spin_unlock(&hw->bitbang.lock);
return 0;
}
+static int s3c24xx_spi_setupxfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct s3c24xx_spi_devstate *cs = spi->controller_state;
+ struct s3c24xx_spi *hw = to_hw(spi);
+ int ret;
+
+ ret = s3c24xx_spi_update_state(spi, t);
+ if (!ret)
+ writeb(cs->sppre, hw->regs + S3C2410_SPPRE);
+
+ return ret;
+}
+
static int s3c24xx_spi_setup(struct spi_device *spi)
{
+ struct s3c24xx_spi_devstate *cs = spi->controller_state;
+ struct s3c24xx_spi *hw = to_hw(spi);
int ret;
- ret = s3c24xx_spi_setupxfer(spi, NULL);
- if (ret < 0) {
- dev_err(&spi->dev, "setupxfer returned %d\n", ret);
+ /* allocate settings on the first call */
+ if (!cs) {
+ cs = kzalloc(sizeof(struct s3c24xx_spi_devstate), GFP_KERNEL);
+ if (!cs) {
+ dev_err(&spi->dev, "no memory for controller state\n");
+ return -ENOMEM;
+ }
+
+ cs->spcon = SPCON_DEFAULT;
+ cs->hz = -1;
+ spi->controller_state = cs;
+ }
+
+ /* initialise the state from the device */
+ ret = s3c24xx_spi_update_state(spi, NULL);
+ if (ret)
return ret;
+
+ spin_lock(&hw->bitbang.lock);
+ if (!hw->bitbang.busy) {
+ hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
+ /* need to ndelay for 0.5 clocktick ? */
}
+ spin_unlock(&hw->bitbang.lock);
return 0;
}
+static void s3c24xx_spi_cleanup(struct spi_device *spi)
+{
+ kfree(spi->controller_state);
+}
+
static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
{
return hw->tx ? hw->tx[count] : 0;
@@ -289,7 +336,9 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer;
hw->bitbang.chipselect = s3c24xx_spi_chipsel;
hw->bitbang.txrx_bufs = s3c24xx_spi_txrx;
- hw->bitbang.master->setup = s3c24xx_spi_setup;
+
+ hw->master->setup = s3c24xx_spi_setup;
+ hw->master->cleanup = s3c24xx_spi_cleanup;
dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
@@ -302,7 +351,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
goto err_no_iores;
}
- hw->ioarea = request_mem_region(res->start, (res->end - res->start)+1,
+ hw->ioarea = request_mem_region(res->start, resource_size(res),
pdev->name);
if (hw->ioarea == NULL) {
@@ -311,7 +360,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
goto err_no_iores;
}
- hw->regs = ioremap(res->start, (res->end - res->start)+1);
+ hw->regs = ioremap(res->start, resource_size(res));
if (hw->regs == NULL) {
dev_err(&pdev->dev, "Cannot map IO\n");
err = -ENXIO;
@@ -388,7 +437,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
err_no_iores:
err_no_pdata:
- spi_master_put(hw->master);;
+ spi_master_put(hw->master);
err_nomem:
return err;
@@ -421,9 +470,9 @@ static int __exit s3c24xx_spi_remove(struct platform_device *dev)
#ifdef CONFIG_PM
-static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
+static int s3c24xx_spi_suspend(struct device *dev)
{
- struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
+ struct s3c24xx_spi *hw = platform_get_drvdata(to_platform_device(dev));
if (hw->pdata && hw->pdata->gpio_setup)
hw->pdata->gpio_setup(hw->pdata, 0);
@@ -432,27 +481,31 @@ static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
return 0;
}
-static int s3c24xx_spi_resume(struct platform_device *pdev)
+static int s3c24xx_spi_resume(struct device *dev)
{
- struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
+ struct s3c24xx_spi *hw = platform_get_drvdata(to_platform_device(dev));
s3c24xx_spi_initialsetup(hw);
return 0;
}
+static struct dev_pm_ops s3c24xx_spi_pmops = {
+ .suspend = s3c24xx_spi_suspend,
+ .resume = s3c24xx_spi_resume,
+};
+
+#define S3C24XX_SPI_PMOPS &s3c24xx_spi_pmops
#else
-#define s3c24xx_spi_suspend NULL
-#define s3c24xx_spi_resume NULL
-#endif
+#define S3C24XX_SPI_PMOPS NULL
+#endif /* CONFIG_PM */
MODULE_ALIAS("platform:s3c2410-spi");
static struct platform_driver s3c24xx_spi_driver = {
.remove = __exit_p(s3c24xx_spi_remove),
- .suspend = s3c24xx_spi_suspend,
- .resume = s3c24xx_spi_resume,
.driver = {
.name = "s3c2410-spi",
.owner = THIS_MODULE,
+ .pm = S3C24XX_SPI_PMOPS,
},
};
diff --git a/drivers/spi/spi_stmp.c b/drivers/spi/spi_stmp.c
new file mode 100644
index 00000000000..d871dc23909
--- /dev/null
+++ b/drivers/spi/spi_stmp.c
@@ -0,0 +1,679 @@
+/*
+ * Freescale STMP378X SPI master driver
+ *
+ * Author: dmitry pervushin <dimka@embeddedalley.com>
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+
+#include <mach/platform.h>
+#include <mach/stmp3xxx.h>
+#include <mach/dma.h>
+#include <mach/regs-ssp.h>
+#include <mach/regs-apbh.h>
+
+
+/* 0 means DMA mode(recommended, default), !0 - PIO mode */
+static int pio;
+static int clock;
+
+/* default timeout for busy waits is 2 seconds */
+#define STMP_SPI_TIMEOUT (2 * HZ)
+
+struct stmp_spi {
+ int id;
+
+ void * __iomem regs; /* vaddr of the control registers */
+
+ int irq, err_irq;
+ u32 dma;
+ struct stmp3xxx_dma_descriptor d;
+
+ u32 speed_khz;
+ u32 saved_timings;
+ u32 divider;
+
+ struct clk *clk;
+ struct device *master_dev;
+
+ struct work_struct work;
+ struct workqueue_struct *workqueue;
+
+ /* lock protects queue access */
+ spinlock_t lock;
+ struct list_head queue;
+
+ struct completion done;
+};
+
+#define busy_wait(cond) \
+ ({ \
+ unsigned long end_jiffies = jiffies + STMP_SPI_TIMEOUT; \
+ bool succeeded = false; \
+ do { \
+ if (cond) { \
+ succeeded = true; \
+ break; \
+ } \
+ cpu_relax(); \
+ } while (time_before(end_jiffies, jiffies)); \
+ succeeded; \
+ })
+
+/**
+ * stmp_spi_init_hw
+ * Initialize the SSP port
+ */
+static int stmp_spi_init_hw(struct stmp_spi *ss)
+{
+ int err = 0;
+ void *pins = ss->master_dev->platform_data;
+
+ err = stmp3xxx_request_pin_group(pins, dev_name(ss->master_dev));
+ if (err)
+ goto out;
+
+ ss->clk = clk_get(NULL, "ssp");
+ if (IS_ERR(ss->clk)) {
+ err = PTR_ERR(ss->clk);
+ goto out_free_pins;
+ }
+ clk_enable(ss->clk);
+
+ stmp3xxx_reset_block(ss->regs, false);
+ stmp3xxx_dma_reset_channel(ss->dma);
+
+ return 0;
+
+out_free_pins:
+ stmp3xxx_release_pin_group(pins, dev_name(ss->master_dev));
+out:
+ return err;
+}
+
+static void stmp_spi_release_hw(struct stmp_spi *ss)
+{
+ void *pins = ss->master_dev->platform_data;
+
+ if (ss->clk && !IS_ERR(ss->clk)) {
+ clk_disable(ss->clk);
+ clk_put(ss->clk);
+ }
+ stmp3xxx_release_pin_group(pins, dev_name(ss->master_dev));
+}
+
+static int stmp_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ u8 bits_per_word;
+ u32 hz;
+ struct stmp_spi *ss = spi_master_get_devdata(spi->master);
+ u16 rate;
+
+ bits_per_word = spi->bits_per_word;
+ if (t && t->bits_per_word)
+ bits_per_word = t->bits_per_word;
+
+ /*
+ * Calculate speed:
+ * - by default, use maximum speed from ssp clk
+ * - if device overrides it, use it
+ * - if transfer specifies other speed, use transfer's one
+ */
+ hz = 1000 * ss->speed_khz / ss->divider;
+ if (spi->max_speed_hz)
+ hz = min(hz, spi->max_speed_hz);
+ if (t && t->speed_hz)
+ hz = min(hz, t->speed_hz);
+
+ if (hz == 0) {
+ dev_err(&spi->dev, "Cannot continue with zero clock\n");
+ return -EINVAL;
+ }
+
+ if (bits_per_word != 8) {
+ dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
+ __func__, bits_per_word);
+ return -EINVAL;
+ }
+
+ dev_dbg(&spi->dev, "Requested clk rate = %uHz, max = %uHz/%d = %uHz\n",
+ hz, ss->speed_khz, ss->divider,
+ ss->speed_khz * 1000 / ss->divider);
+
+ if (ss->speed_khz * 1000 / ss->divider < hz) {
+ dev_err(&spi->dev, "%s, unsupported clock rate %uHz\n",
+ __func__, hz);
+ return -EINVAL;
+ }
+
+ rate = 1000 * ss->speed_khz/ss->divider/hz;
+
+ writel(BF(ss->divider, SSP_TIMING_CLOCK_DIVIDE) |
+ BF(rate - 1, SSP_TIMING_CLOCK_RATE),
+ HW_SSP_TIMING + ss->regs);
+
+ writel(BF(1 /* mode SPI */, SSP_CTRL1_SSP_MODE) |
+ BF(4 /* 8 bits */, SSP_CTRL1_WORD_LENGTH) |
+ ((spi->mode & SPI_CPOL) ? BM_SSP_CTRL1_POLARITY : 0) |
+ ((spi->mode & SPI_CPHA) ? BM_SSP_CTRL1_PHASE : 0) |
+ (pio ? 0 : BM_SSP_CTRL1_DMA_ENABLE),
+ ss->regs + HW_SSP_CTRL1);
+
+ return 0;
+}
+
+static int stmp_spi_setup(struct spi_device *spi)
+{
+ /* spi_setup() does basic checks,
+ * stmp_spi_setup_transfer() does more later
+ */
+ if (spi->bits_per_word != 8) {
+ dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
+ __func__, spi->bits_per_word);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static inline u32 stmp_spi_cs(unsigned cs)
+{
+ return ((cs & 1) ? BM_SSP_CTRL0_WAIT_FOR_CMD : 0) |
+ ((cs & 2) ? BM_SSP_CTRL0_WAIT_FOR_IRQ : 0);
+}
+
+static int stmp_spi_txrx_dma(struct stmp_spi *ss, int cs,
+ unsigned char *buf, dma_addr_t dma_buf, int len,
+ int first, int last, bool write)
+{
+ u32 c0 = 0;
+ dma_addr_t spi_buf_dma = dma_buf;
+ int status = 0;
+ enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+
+ c0 |= (first ? BM_SSP_CTRL0_LOCK_CS : 0);
+ c0 |= (last ? BM_SSP_CTRL0_IGNORE_CRC : 0);
+ c0 |= (write ? 0 : BM_SSP_CTRL0_READ);
+ c0 |= BM_SSP_CTRL0_DATA_XFER;
+
+ c0 |= stmp_spi_cs(cs);
+
+ c0 |= BF(len, SSP_CTRL0_XFER_COUNT);
+
+ if (!dma_buf)
+ spi_buf_dma = dma_map_single(ss->master_dev, buf, len, dir);
+
+ ss->d.command->cmd =
+ BF(len, APBH_CHn_CMD_XFER_COUNT) |
+ BF(1, APBH_CHn_CMD_CMDWORDS) |
+ BM_APBH_CHn_CMD_WAIT4ENDCMD |
+ BM_APBH_CHn_CMD_IRQONCMPLT |
+ BF(write ? BV_APBH_CHn_CMD_COMMAND__DMA_READ :
+ BV_APBH_CHn_CMD_COMMAND__DMA_WRITE,
+ APBH_CHn_CMD_COMMAND);
+ ss->d.command->pio_words[0] = c0;
+ ss->d.command->buf_ptr = spi_buf_dma;
+
+ stmp3xxx_dma_reset_channel(ss->dma);
+ stmp3xxx_dma_clear_interrupt(ss->dma);
+ stmp3xxx_dma_enable_interrupt(ss->dma);
+ init_completion(&ss->done);
+ stmp3xxx_dma_go(ss->dma, &ss->d, 1);
+ wait_for_completion(&ss->done);
+
+ if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & BM_SSP_CTRL0_RUN))
+ status = ETIMEDOUT;
+
+ if (!dma_buf)
+ dma_unmap_single(ss->master_dev, spi_buf_dma, len, dir);
+
+ return status;
+}
+
+static inline void stmp_spi_enable(struct stmp_spi *ss)
+{
+ stmp3xxx_setl(BM_SSP_CTRL0_LOCK_CS, ss->regs + HW_SSP_CTRL0);
+ stmp3xxx_clearl(BM_SSP_CTRL0_IGNORE_CRC, ss->regs + HW_SSP_CTRL0);
+}
+
+static inline void stmp_spi_disable(struct stmp_spi *ss)
+{
+ stmp3xxx_clearl(BM_SSP_CTRL0_LOCK_CS, ss->regs + HW_SSP_CTRL0);
+ stmp3xxx_setl(BM_SSP_CTRL0_IGNORE_CRC, ss->regs + HW_SSP_CTRL0);
+}
+
+static int stmp_spi_txrx_pio(struct stmp_spi *ss, int cs,
+ unsigned char *buf, int len,
+ bool first, bool last, bool write)
+{
+ if (first)
+ stmp_spi_enable(ss);
+
+ stmp3xxx_setl(stmp_spi_cs(cs), ss->regs + HW_SSP_CTRL0);
+
+ while (len--) {
+ if (last && len <= 0)
+ stmp_spi_disable(ss);
+
+ stmp3xxx_clearl(BM_SSP_CTRL0_XFER_COUNT,
+ ss->regs + HW_SSP_CTRL0);
+ stmp3xxx_setl(1, ss->regs + HW_SSP_CTRL0);
+
+ if (write)
+ stmp3xxx_clearl(BM_SSP_CTRL0_READ,
+ ss->regs + HW_SSP_CTRL0);
+ else
+ stmp3xxx_setl(BM_SSP_CTRL0_READ,
+ ss->regs + HW_SSP_CTRL0);
+
+ /* Run! */
+ stmp3xxx_setl(BM_SSP_CTRL0_RUN, ss->regs + HW_SSP_CTRL0);
+
+ if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) &
+ BM_SSP_CTRL0_RUN))
+ break;
+
+ if (write)
+ writel(*buf, ss->regs + HW_SSP_DATA);
+
+ /* Set TRANSFER */
+ stmp3xxx_setl(BM_SSP_CTRL0_DATA_XFER, ss->regs + HW_SSP_CTRL0);
+
+ if (!write) {
+ if (busy_wait((readl(ss->regs + HW_SSP_STATUS) &
+ BM_SSP_STATUS_FIFO_EMPTY)))
+ break;
+ *buf = readl(ss->regs + HW_SSP_DATA) & 0xFF;
+ }
+
+ if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) &
+ BM_SSP_CTRL0_RUN))
+ break;
+
+ /* advance to the next byte */
+ buf++;
+ }
+
+ return len < 0 ? 0 : -ETIMEDOUT;
+}
+
+static int stmp_spi_handle_message(struct stmp_spi *ss, struct spi_message *m)
+{
+ bool first, last;
+ struct spi_transfer *t, *tmp_t;
+ int status = 0;
+ int cs;
+
+ cs = m->spi->chip_select;
+
+ list_for_each_entry_safe(t, tmp_t, &m->transfers, transfer_list) {
+
+ first = (&t->transfer_list == m->transfers.next);
+ last = (&t->transfer_list == m->transfers.prev);
+
+ if (first || t->speed_hz || t->bits_per_word)
+ stmp_spi_setup_transfer(m->spi, t);
+
+ /* reject "not last" transfers which request to change cs */
+ if (t->cs_change && !last) {
+ dev_err(&m->spi->dev,
+ "Message with t->cs_change has been skipped\n");
+ continue;
+ }
+
+ if (t->tx_buf) {
+ status = pio ?
+ stmp_spi_txrx_pio(ss, cs, (void *)t->tx_buf,
+ t->len, first, last, true) :
+ stmp_spi_txrx_dma(ss, cs, (void *)t->tx_buf,
+ t->tx_dma, t->len, first, last, true);
+#ifdef DEBUG
+ if (t->len < 0x10)
+ print_hex_dump_bytes("Tx ",
+ DUMP_PREFIX_OFFSET,
+ t->tx_buf, t->len);
+ else
+ pr_debug("Tx: %d bytes\n", t->len);
+#endif
+ }
+ if (t->rx_buf) {
+ status = pio ?
+ stmp_spi_txrx_pio(ss, cs, t->rx_buf,
+ t->len, first, last, false) :
+ stmp_spi_txrx_dma(ss, cs, t->rx_buf,
+ t->rx_dma, t->len, first, last, false);
+#ifdef DEBUG
+ if (t->len < 0x10)
+ print_hex_dump_bytes("Rx ",
+ DUMP_PREFIX_OFFSET,
+ t->rx_buf, t->len);
+ else
+ pr_debug("Rx: %d bytes\n", t->len);
+#endif
+ }
+
+ if (t->delay_usecs)
+ udelay(t->delay_usecs);
+
+ if (status)
+ break;
+
+ }
+ return status;
+}
+
+/**
+ * stmp_spi_handle - handle messages from the queue
+ */
+static void stmp_spi_handle(struct work_struct *w)
+{
+ struct stmp_spi *ss = container_of(w, struct stmp_spi, work);
+ unsigned long flags;
+ struct spi_message *m;
+
+ spin_lock_irqsave(&ss->lock, flags);
+ while (!list_empty(&ss->queue)) {
+ m = list_entry(ss->queue.next, struct spi_message, queue);
+ list_del_init(&m->queue);
+ spin_unlock_irqrestore(&ss->lock, flags);
+
+ m->status = stmp_spi_handle_message(ss, m);
+ m->complete(m->context);
+
+ spin_lock_irqsave(&ss->lock, flags);
+ }
+ spin_unlock_irqrestore(&ss->lock, flags);
+
+ return;
+}
+
+/**
+ * stmp_spi_transfer - perform message transfer.
+ * Called indirectly from spi_async, queues all the messages to
+ * spi_handle_message.
+ * @spi: spi device
+ * @m: message to be queued
+ */
+static int stmp_spi_transfer(struct spi_device *spi, struct spi_message *m)
+{
+ struct stmp_spi *ss = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+
+ m->status = -EINPROGRESS;
+ spin_lock_irqsave(&ss->lock, flags);
+ list_add_tail(&m->queue, &ss->queue);
+ queue_work(ss->workqueue, &ss->work);
+ spin_unlock_irqrestore(&ss->lock, flags);
+ return 0;
+}
+
+static irqreturn_t stmp_spi_irq(int irq, void *dev_id)
+{
+ struct stmp_spi *ss = dev_id;
+
+ stmp3xxx_dma_clear_interrupt(ss->dma);
+ complete(&ss->done);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t stmp_spi_irq_err(int irq, void *dev_id)
+{
+ struct stmp_spi *ss = dev_id;
+ u32 c1, st;
+
+ c1 = readl(ss->regs + HW_SSP_CTRL1);
+ st = readl(ss->regs + HW_SSP_STATUS);
+ dev_err(ss->master_dev, "%s: status = 0x%08X, c1 = 0x%08X\n",
+ __func__, st, c1);
+ stmp3xxx_clearl(c1 & 0xCCCC0000, ss->regs + HW_SSP_CTRL1);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit stmp_spi_probe(struct platform_device *dev)
+{
+ int err = 0;
+ struct spi_master *master;
+ struct stmp_spi *ss;
+ struct resource *r;
+
+ master = spi_alloc_master(&dev->dev, sizeof(struct stmp_spi));
+ if (master == NULL) {
+ err = -ENOMEM;
+ goto out0;
+ }
+ master->flags = SPI_MASTER_HALF_DUPLEX;
+
+ ss = spi_master_get_devdata(master);
+ platform_set_drvdata(dev, master);
+
+ /* Get resources(memory, IRQ) associated with the device */
+ r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ err = -ENODEV;
+ goto out_put_master;
+ }
+ ss->regs = ioremap(r->start, resource_size(r));
+ if (!ss->regs) {
+ err = -EINVAL;
+ goto out_put_master;
+ }
+
+ ss->master_dev = &dev->dev;
+ ss->id = dev->id;
+
+ INIT_WORK(&ss->work, stmp_spi_handle);
+ INIT_LIST_HEAD(&ss->queue);
+ spin_lock_init(&ss->lock);
+
+ ss->workqueue = create_singlethread_workqueue(dev_name(&dev->dev));
+ if (!ss->workqueue) {
+ err = -ENXIO;
+ goto out_put_master;
+ }
+ master->transfer = stmp_spi_transfer;
+ master->setup = stmp_spi_setup;
+
+ /* the spi->mode bits understood by this driver: */
+ master->mode_bits = SPI_CPOL | SPI_CPHA;
+
+ ss->irq = platform_get_irq(dev, 0);
+ if (ss->irq < 0) {
+ err = ss->irq;
+ goto out_put_master;
+ }
+ ss->err_irq = platform_get_irq(dev, 1);
+ if (ss->err_irq < 0) {
+ err = ss->err_irq;
+ goto out_put_master;
+ }
+
+ r = platform_get_resource(dev, IORESOURCE_DMA, 0);
+ if (r == NULL) {
+ err = -ENODEV;
+ goto out_put_master;
+ }
+
+ ss->dma = r->start;
+ err = stmp3xxx_dma_request(ss->dma, &dev->dev, dev_name(&dev->dev));
+ if (err)
+ goto out_put_master;
+
+ err = stmp3xxx_dma_allocate_command(ss->dma, &ss->d);
+ if (err)
+ goto out_free_dma;
+
+ master->bus_num = dev->id;
+ master->num_chipselect = 1;
+
+ /* SPI controller initializations */
+ err = stmp_spi_init_hw(ss);
+ if (err) {
+ dev_dbg(&dev->dev, "cannot initialize hardware\n");
+ goto out_free_dma_desc;
+ }
+
+ if (clock) {
+ dev_info(&dev->dev, "clock rate forced to %d\n", clock);
+ clk_set_rate(ss->clk, clock);
+ }
+ ss->speed_khz = clk_get_rate(ss->clk);
+ ss->divider = 2;
+ dev_info(&dev->dev, "max possible speed %d = %ld/%d kHz\n",
+ ss->speed_khz, clk_get_rate(ss->clk), ss->divider);
+
+ /* Register for SPI interrupt */
+ err = request_irq(ss->irq, stmp_spi_irq, 0,
+ dev_name(&dev->dev), ss);
+ if (err) {
+ dev_dbg(&dev->dev, "request_irq failed, %d\n", err);
+ goto out_release_hw;
+ }
+
+ /* ..and shared interrupt for all SSP controllers */
+ err = request_irq(ss->err_irq, stmp_spi_irq_err, IRQF_SHARED,
+ dev_name(&dev->dev), ss);
+ if (err) {
+ dev_dbg(&dev->dev, "request_irq(error) failed, %d\n", err);
+ goto out_free_irq;
+ }
+
+ err = spi_register_master(master);
+ if (err) {
+ dev_dbg(&dev->dev, "cannot register spi master, %d\n", err);
+ goto out_free_irq_2;
+ }
+ dev_info(&dev->dev, "at (mapped) 0x%08X, irq=%d, bus %d, %s mode\n",
+ (u32)ss->regs, ss->irq, master->bus_num,
+ pio ? "PIO" : "DMA");
+ return 0;
+
+out_free_irq_2:
+ free_irq(ss->err_irq, ss);
+out_free_irq:
+ free_irq(ss->irq, ss);
+out_free_dma_desc:
+ stmp3xxx_dma_free_command(ss->dma, &ss->d);
+out_free_dma:
+ stmp3xxx_dma_release(ss->dma);
+out_release_hw:
+ stmp_spi_release_hw(ss);
+out_put_master:
+ if (ss->workqueue)
+ destroy_workqueue(ss->workqueue);
+ if (ss->regs)
+ iounmap(ss->regs);
+ platform_set_drvdata(dev, NULL);
+ spi_master_put(master);
+out0:
+ return err;
+}
+
+static int __devexit stmp_spi_remove(struct platform_device *dev)
+{
+ struct stmp_spi *ss;
+ struct spi_master *master;
+
+ master = platform_get_drvdata(dev);
+ if (master == NULL)
+ goto out0;
+ ss = spi_master_get_devdata(master);
+
+ spi_unregister_master(master);
+
+ free_irq(ss->err_irq, ss);
+ free_irq(ss->irq, ss);
+ stmp3xxx_dma_free_command(ss->dma, &ss->d);
+ stmp3xxx_dma_release(ss->dma);
+ stmp_spi_release_hw(ss);
+ destroy_workqueue(ss->workqueue);
+ iounmap(ss->regs);
+ spi_master_put(master);
+ platform_set_drvdata(dev, NULL);
+out0:
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int stmp_spi_suspend(struct platform_device *pdev, pm_message_t pmsg)
+{
+ struct stmp_spi *ss;
+ struct spi_master *master;
+
+ master = platform_get_drvdata(pdev);
+ ss = spi_master_get_devdata(master);
+
+ ss->saved_timings = readl(HW_SSP_TIMING + ss->regs);
+ clk_disable(ss->clk);
+
+ return 0;
+}
+
+static int stmp_spi_resume(struct platform_device *pdev)
+{
+ struct stmp_spi *ss;
+ struct spi_master *master;
+
+ master = platform_get_drvdata(pdev);
+ ss = spi_master_get_devdata(master);
+
+ clk_enable(ss->clk);
+ stmp3xxx_reset_block(ss->regs, false);
+ writel(ss->saved_timings, ss->regs + HW_SSP_TIMING);
+
+ return 0;
+}
+
+#else
+#define stmp_spi_suspend NULL
+#define stmp_spi_resume NULL
+#endif
+
+static struct platform_driver stmp_spi_driver = {
+ .probe = stmp_spi_probe,
+ .remove = __devexit_p(stmp_spi_remove),
+ .driver = {
+ .name = "stmp3xxx_ssp",
+ .owner = THIS_MODULE,
+ },
+ .suspend = stmp_spi_suspend,
+ .resume = stmp_spi_resume,
+};
+
+static int __init stmp_spi_init(void)
+{
+ return platform_driver_register(&stmp_spi_driver);
+}
+
+static void __exit stmp_spi_exit(void)
+{
+ platform_driver_unregister(&stmp_spi_driver);
+}
+
+module_init(stmp_spi_init);
+module_exit(stmp_spi_exit);
+module_param(pio, int, S_IRUGO);
+module_param(clock, int, S_IRUGO);
+MODULE_AUTHOR("dmitry pervushin <dpervushin@embeddedalley.com>");
+MODULE_DESCRIPTION("STMP3xxx SPI/SSP driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 606e7a40a8d..f921bd1109e 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -688,3 +688,4 @@ module_exit(spidev_exit);
MODULE_AUTHOR("Andrea Paterniani, <a.paterniani@swapp-eng.it>");
MODULE_DESCRIPTION("User mode SPI device interface");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:spidev");
diff --git a/drivers/spi/tle62x0.c b/drivers/spi/tle62x0.c
index 455991fbe28..bf9540f5fb9 100644
--- a/drivers/spi/tle62x0.c
+++ b/drivers/spi/tle62x0.c
@@ -329,3 +329,4 @@ module_exit(tle62x0_exit);
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_DESCRIPTION("TLE62x0 SPI driver");
MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("spi:tle62x0");