diff options
author | Bill Pemberton <wfp5p@virginia.edu> | 2009-03-27 11:31:00 -0400 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-06-19 11:00:29 -0700 |
commit | 79a31bae80df12e3cd19a831e7eacfbc4dc555a0 (patch) | |
tree | 66405dab75c0242cfdfe7ad5a789835a3e5a9f91 /drivers/staging/comedi | |
parent | c52c19c33617cb76e2cec7d9555c30f2505e69e4 (diff) |
Staging: comedi: remove C99 comments in mpc624.c
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/staging/comedi')
-rw-r--r-- | drivers/staging/comedi/drivers/mpc624.c | 122 |
1 files changed, 61 insertions, 61 deletions
diff --git a/drivers/staging/comedi/drivers/mpc624.c b/drivers/staging/comedi/drivers/mpc624.c index a151602929d..c3fb504feb1 100644 --- a/drivers/staging/comedi/drivers/mpc624.c +++ b/drivers/staging/comedi/drivers/mpc624.c @@ -61,19 +61,19 @@ Configuration Options: #include <linux/ioport.h> #include <linux/delay.h> -// Consecutive I/O port addresses +/* Consecutive I/O port addresses */ #define MPC624_SIZE 16 -// Offsets of different ports -#define MPC624_MASTER_CONTROL 0 // not used -#define MPC624_GNMUXCH 1 // Gain, Mux, Channel of ADC -#define MPC624_ADC 2 // read/write to/from ADC -#define MPC624_EE 3 // read/write to/from serial EEPROM via I2C -#define MPC624_LEDS 4 // write to LEDs -#define MPC624_DIO 5 // read/write to/from digital I/O ports -#define MPC624_IRQ_MASK 6 // IRQ masking enable/disable +/* Offsets of different ports */ +#define MPC624_MASTER_CONTROL 0 /* not used */ +#define MPC624_GNMUXCH 1 /* Gain, Mux, Channel of ADC */ +#define MPC624_ADC 2 /* read/write to/from ADC */ +#define MPC624_EE 3 /* read/write to/from serial EEPROM via I2C */ +#define MPC624_LEDS 4 /* write to LEDs */ +#define MPC624_DIO 5 /* read/write to/from digital I/O ports */ +#define MPC624_IRQ_MASK 6 /* IRQ masking enable/disable */ -// Register bits' names +/* Register bits' names */ #define MPC624_ADBUSY (1<<5) #define MPC624_ADSDO (1<<4) #define MPC624_ADFO (1<<3) @@ -81,19 +81,19 @@ Configuration Options: #define MPC624_ADSCK (1<<1) #define MPC624_ADSDI (1<<0) -// SDI Speed/Resolution Programming bits +/* SDI Speed/Resolution Programming bits */ #define MPC624_OSR4 (1<<31) #define MPC624_OSR3 (1<<30) #define MPC624_OSR2 (1<<29) #define MPC624_OSR1 (1<<28) #define MPC624_OSR0 (1<<27) -// 32-bit output value bits' names +/* 32-bit output value bits' names */ #define MPC624_EOC_BIT (1<<31) #define MPC624_DMY_BIT (1<<30) #define MPC624_SGN_BIT (1<<29) -// Convertion speeds +/* Convertion speeds */ /* OSR4 OSR3 OSR2 OSR1 OSR0 Convertion rate RMS noise ENOB^ * X 0 0 0 1 3.52kHz 23uV 17 * X 0 0 1 0 1.76kHz 3.5uV 20 @@ -119,36 +119,36 @@ Configuration Options: #define MPC624_SPEED_27_5_Hz (MPC624_OSR4 | MPC624_OSR3 ) #define MPC624_SPEED_13_75_Hz (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR0) #define MPC624_SPEED_6_875_Hz (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0) -//---------------------------------------------------------------------------- +/* ---------------------------------------------------------------------------- */ struct skel_private { - unsigned long int ulConvertionRate; // set by mpc624_attach() from driver's parameters + unsigned long int ulConvertionRate; /* set by mpc624_attach() from driver's parameters */ }; #define devpriv ((struct skel_private *)dev->private) -//---------------------------------------------------------------------------- +/* ---------------------------------------------------------------------------- */ static const struct comedi_lrange range_mpc624_bipolar1 = { 1, { -// BIP_RANGE(1.01) // this is correct, - // but my MPC-624 actually seems to have a range of 2.02 +/* BIP_RANGE(1.01) this is correct, */ + /* but my MPC-624 actually seems to have a range of 2.02 */ BIP_RANGE(2.02) } }; static const struct comedi_lrange range_mpc624_bipolar10 = { 1, { -// BIP_RANGE(10.1) // this is correct, - // but my MPC-624 actually seems to have a range of 20.2 +/* BIP_RANGE(10.1) this is correct, */ + /* but my MPC-624 actually seems to have a range of 20.2 */ BIP_RANGE(20.2) } }; -//---------------------------------------------------------------------------- +/* ---------------------------------------------------------------------------- */ static int mpc624_attach(struct comedi_device * dev, struct comedi_devconfig * it); static int mpc624_detach(struct comedi_device * dev); -//---------------------------------------------------------------------------- +/* ---------------------------------------------------------------------------- */ static struct comedi_driver driver_mpc624 = { driver_name:"mpc624", module:THIS_MODULE, @@ -156,10 +156,10 @@ static struct comedi_driver driver_mpc624 = { detach:mpc624_detach }; -//---------------------------------------------------------------------------- +/* ---------------------------------------------------------------------------- */ static int mpc624_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data); -//---------------------------------------------------------------------------- +/* ---------------------------------------------------------------------------- */ static int mpc624_attach(struct comedi_device * dev, struct comedi_devconfig * it) { struct comedi_subdevice *s; @@ -175,7 +175,7 @@ static int mpc624_attach(struct comedi_device * dev, struct comedi_devconfig * i dev->iobase = iobase; dev->board_name = "mpc624"; - // Private structure initialization + /* Private structure initialization */ if (alloc_private(dev, sizeof(struct skel_private)) < 0) return -ENOMEM; @@ -226,7 +226,7 @@ static int mpc624_attach(struct comedi_device * dev, struct comedi_devconfig * i devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz; } - // Subdevices structures + /* Subdevices structures */ if (alloc_subdevices(dev, 1) < 0) return -ENOMEM; @@ -267,7 +267,7 @@ static int mpc624_detach(struct comedi_device * dev) return 0; } -// Timeout 200ms +/* Timeout 200ms */ #define TIMEOUT 200 static int mpc624_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * s, @@ -277,16 +277,16 @@ static int mpc624_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * unsigned long int data_in, data_out; unsigned char ucPort; - // WARNING: We always write 0 to GNSWA bit, so the channel range is +-/10.1Vdc + /* WARNING: We always write 0 to GNSWA bit, so the channel range is +-/10.1Vdc */ outb(insn->chanspec, dev->iobase + MPC624_GNMUXCH); -// rt_printk("Channel %d: \n", insn->chanspec); +/* rt_printk("Channel %d: \n", insn->chanspec); */ if (!insn->n) { rt_printk("MPC624: Warning, no data to aquire\n"); return 0; } for (n = 0; n < insn->n; n++) { - // Trigger the convertion + /* Trigger the convertion */ outb(MPC624_ADSCK, dev->iobase + MPC624_ADC); comedi_udelay(1); outb(MPC624_ADCS | MPC624_ADSCK, dev->iobase + MPC624_ADC); @@ -294,7 +294,7 @@ static int mpc624_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * outb(0, dev->iobase + MPC624_ADC); comedi_udelay(1); - // Wait for the convertion to end + /* Wait for the convertion to end */ for (i = 0; i < TIMEOUT; i++) { ucPort = inb(dev->iobase + MPC624_ADC); if (ucPort & MPC624_ADBUSY) @@ -307,32 +307,32 @@ static int mpc624_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * data[n] = 0; return -ETIMEDOUT; } - // Start reading data + /* Start reading data */ data_in = 0; data_out = devpriv->ulConvertionRate; comedi_udelay(1); for (i = 0; i < 32; i++) { - // Set the clock low + /* Set the clock low */ outb(0, dev->iobase + MPC624_ADC); comedi_udelay(1); - if (data_out & (1 << 31)) // the next bit is a 1 + if (data_out & (1 << 31)) /* the next bit is a 1 */ { - // Set the ADSDI line (send to MPC624) + /* Set the ADSDI line (send to MPC624) */ outb(MPC624_ADSDI, dev->iobase + MPC624_ADC); comedi_udelay(1); - // Set the clock high + /* Set the clock high */ outb(MPC624_ADSCK | MPC624_ADSDI, dev->iobase + MPC624_ADC); - } else // the next bit is a 0 + } else /* the next bit is a 0 */ { - // Set the ADSDI line (send to MPC624) + /* Set the ADSDI line (send to MPC624) */ outb(0, dev->iobase + MPC624_ADC); comedi_udelay(1); - // Set the clock high + /* Set the clock high */ outb(MPC624_ADSCK, dev->iobase + MPC624_ADC); } - // Read ADSDO on high clock (receive from MPC624) + /* Read ADSDO on high clock (receive from MPC624) */ comedi_udelay(1); data_in <<= 1; data_in |= @@ -343,18 +343,18 @@ static int mpc624_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * data_out <<= 1; } - // Received 32-bit long value consist of: - // 31: EOC (End Of Transmission) bit - should be 0 - // 30: DMY (Dummy) bit - should be 0 - // 29: SIG (Sign) bit - 1 if the voltage is positive, 0 if negative - // 28: MSB (Most Significant Bit) - the first bit of convertion result - // .... - // 05: LSB (Least Significant Bit) - the last bit of convertion result - // 04: sub-LSB - sub-LSBs are basically noise, but when - // 03: sub-LSB averaged properly, they can increase convertion - // 02: sub-LSB precision up to 29 bits; they can be discarded - // 01: sub-LSB without loss of resolution. - // 00: sub-LSB + /* Received 32-bit long value consist of: */ + /* 31: EOC (End Of Transmission) bit - should be 0 */ + /* 30: DMY (Dummy) bit - should be 0 */ + /* 29: SIG (Sign) bit - 1 if the voltage is positive, 0 if negative */ + /* 28: MSB (Most Significant Bit) - the first bit of convertion result */ + /* .... */ + /* 05: LSB (Least Significant Bit) - the last bit of convertion result */ + /* 04: sub-LSB - sub-LSBs are basically noise, but when */ + /* 03: sub-LSB averaged properly, they can increase convertion */ + /* 02: sub-LSB precision up to 29 bits; they can be discarded */ + /* 01: sub-LSB without loss of resolution. */ + /* 00: sub-LSB */ if (data_in & MPC624_EOC_BIT) rt_printk("MPC624: EOC bit is set (data_in=%lu)!", @@ -362,24 +362,24 @@ static int mpc624_ai_rinsn(struct comedi_device * dev, struct comedi_subdevice * if (data_in & MPC624_DMY_BIT) rt_printk("MPC624: DMY bit is set (data_in=%lu)!", data_in); - if (data_in & MPC624_SGN_BIT) // check the sign bit - { // The voltage is positive - data_in &= 0x3FFFFFFF; // EOC and DMY should be 0, but we will mask them out just to be sure - data[n] = data_in; // comedi operates on unsigned numbers, so we don't clear the SGN bit - // SGN bit is still set! It's correct, since we're converting to unsigned. - } else { // The voltage is negative - // data_in contains a number in 30-bit two's complement code and we must deal with it + if (data_in & MPC624_SGN_BIT) /* check the sign bit */ + { /* The voltage is positive */ + data_in &= 0x3FFFFFFF; /* EOC and DMY should be 0, but we will mask them out just to be sure */ + data[n] = data_in; /* comedi operates on unsigned numbers, so we don't clear the SGN bit */ + /* SGN bit is still set! It's correct, since we're converting to unsigned. */ + } else { /* The voltage is negative */ + /* data_in contains a number in 30-bit two's complement code and we must deal with it */ data_in |= MPC624_SGN_BIT; data_in = ~data_in; data_in += 1; data_in &= ~(MPC624_EOC_BIT | MPC624_DMY_BIT); - // clear EOC and DMY bits + /* clear EOC and DMY bits */ data_in = 0x20000000 - data_in; data[n] = data_in; } } - // Return the number of samples read/written + /* Return the number of samples read/written */ return n; } |